Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2018-02-09

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Two fixes for BPF sockmap in order to break up circular map references
   from programs attached to sockmap, and detaching related sockets in
   case of socket close() event. For the latter we get rid of the
   smap_state_change() and plug into ULP infrastructure, which will later
   also be used for additional features anyway such as TX hooks. For the
   second issue, dependency chain is broken up via map release callback
   to free parse/verdict programs, all from John.

2) Fix a libbpf relocation issue that was found while implementing XDP
   support for Suricata project. Issue was that when clang was invoked
   with default target instead of bpf target, then various other e.g.
   debugging relevant sections are added to the ELF file that contained
   relocation entries pointing to non-BPF related sections which libbpf
   trips over instead of skipping them. Test cases for libbpf are added
   as well, from Jesper.

3) Various misc fixes for bpftool and one for libbpf: a small addition
   to libbpf to make sure it recognizes all standard section prefixes.
   Then, the Makefile in bpftool/Documentation is improved to explicitly
   check for rst2man being installed on the system as we otherwise risk
   installing empty man pages; the man page for bpftool-map is corrected
   and a set of missing bash completions added in order to avoid shipping
   bpftool where the completions are only partially working, from Quentin.

4) Fix applying the relocation to immediate load instructions in the
   nfp JIT which were missing a shift, from Jakub.

5) Two fixes for the BPF kernel selftests: handle CONFIG_BPF_JIT_ALWAYS_ON=y
   gracefully in test_bpf.ko module and mark them as FLAG_EXPECTED_FAIL
   in this case; and explicitly delete the veth devices in the two tests
   test_xdp_{meta,redirect}.sh before dismantling the netnses as when
   selftests are run in batch mode, then workqueue to handle destruction
   might not have finished yet and thus veth creation in next test under
   same dev name would fail, from Yonghong.

6) Fix test_kmod.sh to check the test_bpf.ko module path before performing
   an insmod, and fallback to modprobe. Especially the latter is useful
   when having a device under test that has the modules installed instead,
   from Naresh.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

12 files changed, 351 insertions, 28 deletions

diff --git a/tools/bpf/bpftool/Documentation/Makefile b/tools/bpf/bpftool/Documentation/Makefile
index c462a92..a9d47c1 100644
--- a/tools/bpf/bpftool/Documentation/Makefile
+++ b/tools/bpf/bpftool/Documentation/Makefile
@@ -23,7 +23,12 @@ DOC_MAN8 = $(addprefix $(OUTPUT),$(_DOC_MAN8))
 man: man8
 man8: $(DOC_MAN8)
 
+RST2MAN_DEP := $(shell command -v rst2man 2>/dev/null)
+
 $(OUTPUT)%.8: %.rst
+ifndef RST2MAN_DEP
+	$(error "rst2man not found, but required to generate man pages")
+endif
 	$(QUIET_GEN)rst2man $< > $@
 
 clean:
diff --git a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
index 2fe2a1b..0e4e923 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-cgroup.rst
@@ -26,8 +26,8 @@ MAP COMMANDS
 |	**bpftool** **cgroup help**
 |
 |	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
-|	*ATTACH_TYPE* := { *ingress* | *egress* | *sock_create* | *sock_ops* | *device* }
-|	*ATTACH_FLAGS* := { *multi* | *override* }
+|	*ATTACH_TYPE* := { **ingress** | **egress** | **sock_create** | **sock_ops** | **device** }
+|	*ATTACH_FLAGS* := { **multi** | **override** }
 
 DESCRIPTION
 ===========
diff --git a/tools/bpf/bpftool/Documentation/bpftool-map.rst b/tools/bpf/bpftool/Documentation/bpftool-map.rst
index 0ab32b3..457e868 100644
--- a/tools/bpf/bpftool/Documentation/bpftool-map.rst
+++ b/tools/bpf/bpftool/Documentation/bpftool-map.rst
@@ -31,7 +31,8 @@ MAP COMMANDS
 |	**bpftool** **map help**
 |
 |	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
-|	*VALUE* := { *BYTES* | *MAP* | *PROGRAM* }
+|	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* }
+|	*VALUE* := { *BYTES* | *MAP* | *PROG* }
 |	*UPDATE_FLAGS* := { **any** | **exist** | **noexist** }
 
 DESCRIPTION
diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 0137866..08719c5 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -52,16 +52,24 @@ _bpftool_once_attr()
     done
 }
 
-# Takes a list of words in argument; adds them all to COMPREPLY if none of them
-# is already present on the command line. Returns no value.
-_bpftool_one_of_list()
+# Takes a list of words as argument; if any of those words is present on the
+# command line, return 0. Otherwise, return 1.
+_bpftool_search_list()
 {
     local w idx
     for w in $*; do
         for (( idx=3; idx < ${#words[@]}-1; idx++ )); do
-            [[ $w == ${words[idx]} ]] && return 1
+            [[ $w == ${words[idx]} ]] && return 0
         done
     done
+    return 1
+}
+
+# Takes a list of words in argument; adds them all to COMPREPLY if none of them
+# is already present on the command line. Returns no value.
+_bpftool_one_of_list()
+{
+    _bpftool_search_list $* && return 1
     COMPREPLY+=( $( compgen -W "$*" -- "$cur" ) )
 }
 
@@ -230,10 +238,14 @@ _bpftool()
                     fi
                     return 0
                     ;;
+                load)
+                    _filedir
+                    return 0
+                    ;;
                 *)
                     [[ $prev == $object ]] && \
-                        COMPREPLY=( $( compgen -W 'dump help pin show list' -- \
-                            "$cur" ) )
+                        COMPREPLY=( $( compgen -W 'dump help pin load \
+                            show list' -- "$cur" ) )
                     ;;
             esac
             ;;
@@ -347,6 +359,54 @@ _bpftool()
                     ;;
             esac
             ;;
+        cgroup)
+            case $command in
+                show|list)
+                    _filedir
+                    return 0
+                    ;;
+                attach|detach)
+                    local ATTACH_TYPES='ingress egress sock_create sock_ops \
+                        device'
+                    local ATTACH_FLAGS='multi override'
+                    local PROG_TYPE='id pinned tag'
+                    case $prev in
+                        $command)
+                            _filedir
+                            return 0
+                            ;;
+                        ingress|egress|sock_create|sock_ops|device)
+                            COMPREPLY=( $( compgen -W "$PROG_TYPE" -- \
+                                "$cur" ) )
+                            return 0
+                            ;;
+                        id)
+                            _bpftool_get_prog_ids
+                            return 0
+                            ;;
+                        *)
+                            if ! _bpftool_search_list "$ATTACH_TYPES"; then
+                                COMPREPLY=( $( compgen -W "$ATTACH_TYPES" -- \
+                                    "$cur" ) )
+                            elif [[ "$command" == "attach" ]]; then
+                                # We have an attach type on the command line,
+                                # but it is not the previous word, or
+                                # "id|pinned|tag" (we already checked for
+                                # that). This should only leave the case when
+                                # we need attach flags for "attach" commamnd.
+                                _bpftool_one_of_list "$ATTACH_FLAGS"
+                            fi
+                            return 0
+                            ;;
+                    esac
+                    ;;
+                *)
+                    [[ $prev == $object ]] && \
+                        COMPREPLY=( $( compgen -W 'help attach detach \
+                            show list' -- "$cur" ) )
+                    ;;
+            esac
+            ;;
     esac
 } &&
 complete -F _bpftool bpftool
diff --git a/tools/include/uapi/linux/bpf_common.h b/tools/include/uapi/linux/bpf_common.h
index 18be907..ee97668 100644
--- a/tools/include/uapi/linux/bpf_common.h
+++ b/tools/include/uapi/linux/bpf_common.h
@@ -15,9 +15,10 @@
 
 /* ld/ldx fields */
 #define BPF_SIZE(code)  ((code) & 0x18)
-#define		BPF_W		0x00
-#define		BPF_H		0x08
-#define		BPF_B		0x10
+#define		BPF_W		0x00 /* 32-bit */
+#define		BPF_H		0x08 /* 16-bit */
+#define		BPF_B		0x10 /*  8-bit */
+/* eBPF		BPF_DW		0x18    64-bit */
 #define BPF_MODE(code)  ((code) & 0xe0)
 #define		BPF_IMM		0x00
 #define		BPF_ABS		0x20
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 71ddc48..97073d6 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -319,8 +319,8 @@ bpf_program__init(void *data, size_t size, char *section_name, int idx,
 
 	prog->section_name = strdup(section_name);
 	if (!prog->section_name) {
-		pr_warning("failed to alloc name for prog under section %s\n",
-			   section_name);
+		pr_warning("failed to alloc name for prog under section(%d) %s\n",
+			   idx, section_name);
 		goto errout;
 	}
 
@@ -742,6 +742,24 @@ bpf_object__init_maps(struct bpf_object *obj)
 	return 0;
 }
 
+static bool section_have_execinstr(struct bpf_object *obj, int idx)
+{
+	Elf_Scn *scn;
+	GElf_Shdr sh;
+
+	scn = elf_getscn(obj->efile.elf, idx);
+	if (!scn)
+		return false;
+
+	if (gelf_getshdr(scn, &sh) != &sh)
+		return false;
+
+	if (sh.sh_flags & SHF_EXECINSTR)
+		return true;
+
+	return false;
+}
+
 static int bpf_object__elf_collect(struct bpf_object *obj)
 {
 	Elf *elf = obj->efile.elf;
@@ -763,29 +781,29 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 
 		idx++;
 		if (gelf_getshdr(scn, &sh) != &sh) {
-			pr_warning("failed to get section header from %s\n",
-				   obj->path);
+			pr_warning("failed to get section(%d) header from %s\n",
+				   idx, obj->path);
 			err = -LIBBPF_ERRNO__FORMAT;
 			goto out;
 		}
 
 		name = elf_strptr(elf, ep->e_shstrndx, sh.sh_name);
 		if (!name) {
-			pr_warning("failed to get section name from %s\n",
-				   obj->path);
+			pr_warning("failed to get section(%d) name from %s\n",
+				   idx, obj->path);
 			err = -LIBBPF_ERRNO__FORMAT;
 			goto out;
 		}
 
 		data = elf_getdata(scn, 0);
 		if (!data) {
-			pr_warning("failed to get section data from %s(%s)\n",
-				   name, obj->path);
+			pr_warning("failed to get section(%d) data from %s(%s)\n",
+				   idx, name, obj->path);
 			err = -LIBBPF_ERRNO__FORMAT;
 			goto out;
 		}
-		pr_debug("section %s, size %ld, link %d, flags %lx, type=%d\n",
-			 name, (unsigned long)data->d_size,
+		pr_debug("section(%d) %s, size %ld, link %d, flags %lx, type=%d\n",
+			 idx, name, (unsigned long)data->d_size,
 			 (int)sh.sh_link, (unsigned long)sh.sh_flags,
 			 (int)sh.sh_type);
 
@@ -825,6 +843,14 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 		} else if (sh.sh_type == SHT_REL) {
 			void *reloc = obj->efile.reloc;
 			int nr_reloc = obj->efile.nr_reloc + 1;
+			int sec = sh.sh_info; /* points to other section */
+
+			/* Only do relo for section with exec instructions */
+			if (!section_have_execinstr(obj, sec)) {
+				pr_debug("skip relo %s(%d) for section(%d)\n",
+					 name, idx, sec);
+				continue;
+			}
 
 			reloc = realloc(reloc,
 					sizeof(*obj->efile.reloc) * nr_reloc);
@@ -840,6 +866,8 @@ static int bpf_object__elf_collect(struct bpf_object *obj)
 				obj->efile.reloc[n].shdr = sh;
 				obj->efile.reloc[n].data = data;
 			}
+		} else {
+			pr_debug("skip section(%d) %s\n", idx, name);
 		}
 		if (err)
 			goto out;
@@ -1119,8 +1147,7 @@ static int bpf_object__collect_reloc(struct bpf_object *obj)
 
 		prog = bpf_object__find_prog_by_idx(obj, idx);
 		if (!prog) {
-			pr_warning("relocation failed: no %d section\n",
-				   idx);
+			pr_warning("relocation failed: no section(%d)\n", idx);
 			return -LIBBPF_ERRNO__RELOC;
 		}
 
@@ -1816,12 +1843,17 @@ static const struct {
 	BPF_PROG_SEC("socket",		BPF_PROG_TYPE_SOCKET_FILTER),
 	BPF_PROG_SEC("kprobe/",		BPF_PROG_TYPE_KPROBE),
 	BPF_PROG_SEC("kretprobe/",	BPF_PROG_TYPE_KPROBE),
+	BPF_PROG_SEC("classifier",	BPF_PROG_TYPE_SCHED_CLS),
+	BPF_PROG_SEC("action",		BPF_PROG_TYPE_SCHED_ACT),
 	BPF_PROG_SEC("tracepoint/",	BPF_PROG_TYPE_TRACEPOINT),
 	BPF_PROG_SEC("xdp",		BPF_PROG_TYPE_XDP),
 	BPF_PROG_SEC("perf_event",	BPF_PROG_TYPE_PERF_EVENT),
 	BPF_PROG_SEC("cgroup/skb",	BPF_PROG_TYPE_CGROUP_SKB),
 	BPF_PROG_SEC("cgroup/sock",	BPF_PROG_TYPE_CGROUP_SOCK),
 	BPF_PROG_SEC("cgroup/dev",	BPF_PROG_TYPE_CGROUP_DEVICE),
+	BPF_PROG_SEC("lwt_in",		BPF_PROG_TYPE_LWT_IN),
+	BPF_PROG_SEC("lwt_out",		BPF_PROG_TYPE_LWT_OUT),
+	BPF_PROG_SEC("lwt_xmit",	BPF_PROG_TYPE_LWT_XMIT),
 	BPF_PROG_SEC("sockops",		BPF_PROG_TYPE_SOCK_OPS),
 	BPF_PROG_SEC("sk_skb",		BPF_PROG_TYPE_SK_SKB),
 };
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 566d6ad..5c43c18 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -13,6 +13,7 @@ endif
 CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(GENDIR) $(GENFLAGS) -I../../../include
 LDLIBS += -lcap -lelf -lrt -lpthread
 
+# Order correspond to 'make run_tests' order
 TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
 	test_align test_verifier_log test_dev_cgroup test_tcpbpf_user
 
@@ -22,15 +23,24 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test
 	test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \
 	sample_map_ret0.o test_tcpbpf_kern.o
 
-TEST_PROGS := test_kmod.sh test_xdp_redirect.sh test_xdp_meta.sh \
+# Order correspond to 'make run_tests' order
+TEST_PROGS := test_kmod.sh \
+	test_libbpf.sh \
+	test_xdp_redirect.sh \
+	test_xdp_meta.sh \
 	test_offload.py
 
+# Compile but not part of 'make run_tests'
+TEST_GEN_PROGS_EXTENDED = test_libbpf_open
+
 include ../lib.mk
 
 BPFOBJ := $(OUTPUT)/libbpf.a cgroup_helpers.c
 
 $(TEST_GEN_PROGS): $(BPFOBJ)
 
+$(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/libbpf.a
+
 .PHONY: force
 
 # force a rebuild of BPFOBJ when its dependencies are updated
diff --git a/tools/testing/selftests/bpf/test_kmod.sh b/tools/testing/selftests/bpf/test_kmod.sh
index ed4774d..35669cc 100755
--- a/tools/testing/selftests/bpf/test_kmod.sh
+++ b/tools/testing/selftests/bpf/test_kmod.sh
@@ -10,9 +10,21 @@ test_run()
 
 	echo "[ JIT enabled:$1 hardened:$2 ]"
 	dmesg -C
-	insmod $SRC_TREE/lib/test_bpf.ko 2> /dev/null
-	if [ $? -ne 0 ]; then
-		rc=1
+	if [ -f ${SRC_TREE}/lib/test_bpf.ko ]; then
+		insmod ${SRC_TREE}/lib/test_bpf.ko 2> /dev/null
+		if [ $? -ne 0 ]; then
+			rc=1
+		fi
+	else
+		# Use modprobe dry run to check for missing test_bpf module
+		if ! /sbin/modprobe -q -n test_bpf; then
+			echo "test_bpf: [SKIP]"
+		elif /sbin/modprobe -q test_bpf; then
+			echo "test_bpf: ok"
+		else
+			echo "test_bpf: [FAIL]"
+			rc=1
+		fi
 	fi
 	rmmod  test_bpf 2> /dev/null
 	dmesg | grep FAIL
diff --git a/tools/testing/selftests/bpf/test_libbpf.sh b/tools/testing/selftests/bpf/test_libbpf.sh
new file mode 100755
index 0000000..d97dc91
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_libbpf.sh
@@ -0,0 +1,49 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+export TESTNAME=test_libbpf
+
+# Determine selftest success via shell exit code
+exit_handler()
+{
+	if (( $? == 0 )); then
+		echo "selftests: $TESTNAME [PASS]";
+	else
+		echo "$TESTNAME: failed at file $LAST_LOADED" 1>&2
+		echo "selftests: $TESTNAME [FAILED]";
+	fi
+}
+
+libbpf_open_file()
+{
+	LAST_LOADED=$1
+	if [ -n "$VERBOSE" ]; then
+	    ./test_libbpf_open $1
+	else
+	    ./test_libbpf_open --quiet $1
+	fi
+}
+
+# Exit script immediately (well catched by trap handler) if any
+# program/thing exits with a non-zero status.
+set -e
+
+# (Use 'trap -l' to list meaning of numbers)
+trap exit_handler 0 2 3 6 9
+
+libbpf_open_file test_l4lb.o
+
+# TODO: fix libbpf to load noinline functions
+# [warning] libbpf: incorrect bpf_call opcode
+#libbpf_open_file test_l4lb_noinline.o
+
+# TODO: fix test_xdp_meta.c to load with libbpf
+# [warning] libbpf: test_xdp_meta.o doesn't provide kernel version
+#libbpf_open_file test_xdp_meta.o
+
+# TODO: fix libbpf to handle .eh_frame
+# [warning] libbpf: relocation failed: no section(10)
+#libbpf_open_file ../../../../samples/bpf/tracex3_kern.o
+
+# Success
+exit 0
diff --git a/tools/testing/selftests/bpf/test_libbpf_open.c b/tools/testing/selftests/bpf/test_libbpf_open.c
new file mode 100644
index 0000000..8fcd1c0
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_libbpf_open.c
@@ -0,0 +1,150 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018 Jesper Dangaard Brouer, Red Hat Inc.
+ */
+static const char *__doc__ =
+	"Libbpf test program for loading BPF ELF object files";
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdarg.h>
+#include <bpf/libbpf.h>
+#include <getopt.h>
+
+static const struct option long_options[] = {
+	{"help",	no_argument,		NULL, 'h' },
+	{"debug",	no_argument,		NULL, 'D' },
+	{"quiet",	no_argument,		NULL, 'q' },
+	{0, 0, NULL,  0 }
+};
+
+static void usage(char *argv[])
+{
+	int i;
+
+	printf("\nDOCUMENTATION:\n%s\n\n", __doc__);
+	printf(" Usage: %s (options-see-below) BPF_FILE\n", argv[0]);
+	printf(" Listing options:\n");
+	for (i = 0; long_options[i].name != 0; i++) {
+		printf(" --%-12s", long_options[i].name);
+		printf(" short-option: -%c",
+		       long_options[i].val);
+		printf("\n");
+	}
+	printf("\n");
+}
+
+#define DEFINE_PRINT_FN(name, enabled) \
+static int libbpf_##name(const char *fmt, ...)  	\
+{							\
+        va_list args;					\
+        int ret;					\
+							\
+        va_start(args, fmt);				\
+	if (enabled) {					\
+		fprintf(stderr, "[" #name "] ");	\
+		ret = vfprintf(stderr, fmt, args);	\
+	}						\
+        va_end(args);					\
+        return ret;					\
+}
+DEFINE_PRINT_FN(warning, 1)
+DEFINE_PRINT_FN(info, 1)
+DEFINE_PRINT_FN(debug, 1)
+
+#define EXIT_FAIL_LIBBPF EXIT_FAILURE
+#define EXIT_FAIL_OPTION 2
+
+int test_walk_progs(struct bpf_object *obj, bool verbose)
+{
+	struct bpf_program *prog;
+	int cnt = 0;
+
+	bpf_object__for_each_program(prog, obj) {
+		cnt++;
+		if (verbose)
+			printf("Prog (count:%d) section_name: %s\n", cnt,
+			       bpf_program__title(prog, false));
+	}
+	return 0;
+}
+
+int test_walk_maps(struct bpf_object *obj, bool verbose)
+{
+	struct bpf_map *map;
+	int cnt = 0;
+
+	bpf_map__for_each(map, obj) {
+		cnt++;
+		if (verbose)
+			printf("Map (count:%d) name: %s\n", cnt,
+			       bpf_map__name(map));
+	}
+	return 0;
+}
+
+int test_open_file(char *filename, bool verbose)
+{
+	struct bpf_object *bpfobj = NULL;
+	long err;
+
+	if (verbose)
+		printf("Open BPF ELF-file with libbpf: %s\n", filename);
+
+	/* Load BPF ELF object file and check for errors */
+	bpfobj = bpf_object__open(filename);
+	err = libbpf_get_error(bpfobj);
+	if (err) {
+		char err_buf[128];
+		libbpf_strerror(err, err_buf, sizeof(err_buf));
+		if (verbose)
+			printf("Unable to load eBPF objects in file '%s': %s\n",
+			       filename, err_buf);
+		return EXIT_FAIL_LIBBPF;
+	}
+	test_walk_progs(bpfobj, verbose);
+	test_walk_maps(bpfobj, verbose);
+
+	if (verbose)
+		printf("Close BPF ELF-file with libbpf: %s\n",
+		       bpf_object__name(bpfobj));
+	bpf_object__close(bpfobj);
+
+	return 0;
+}
+
+int main(int argc, char **argv)
+{
+	char filename[1024] = { 0 };
+	bool verbose = 1;
+	int longindex = 0;
+	int opt;
+
+	libbpf_set_print(libbpf_warning, libbpf_info, NULL);
+
+	/* Parse commands line args */
+	while ((opt = getopt_long(argc, argv, "hDq",
+				  long_options, &longindex)) != -1) {
+		switch (opt) {
+		case 'D':
+			libbpf_set_print(libbpf_warning, libbpf_info,
+					 libbpf_debug);
+			break;
+		case 'q': /* Use in scripting mode */
+			verbose = 0;
+			break;
+		case 'h':
+		default:
+			usage(argv);
+			return EXIT_FAIL_OPTION;
+		}
+	}
+	if (optind >= argc) {
+		usage(argv);
+		printf("ERROR: Expected BPF_FILE argument after options\n");
+		return EXIT_FAIL_OPTION;
+	}
+	snprintf(filename, sizeof(filename), "%s", argv[optind]);
+
+	return test_open_file(filename, verbose);
+}
diff --git a/tools/testing/selftests/bpf/test_xdp_meta.sh b/tools/testing/selftests/bpf/test_xdp_meta.sh
index 307aa85..637fcf4 100755
--- a/tools/testing/selftests/bpf/test_xdp_meta.sh
+++ b/tools/testing/selftests/bpf/test_xdp_meta.sh
@@ -9,6 +9,7 @@ cleanup()
 	fi
 
 	set +e
+	ip link del veth1 2> /dev/null
 	ip netns del ns1 2> /dev/null
 	ip netns del ns2 2> /dev/null
 }
diff --git a/tools/testing/selftests/bpf/test_xdp_redirect.sh b/tools/testing/selftests/bpf/test_xdp_redirect.sh
index 344a365..c4b17e0 100755
--- a/tools/testing/selftests/bpf/test_xdp_redirect.sh
+++ b/tools/testing/selftests/bpf/test_xdp_redirect.sh
@@ -19,6 +19,8 @@ cleanup()
 	fi
 
 	set +e
+	ip link del veth1 2> /dev/null
+	ip link del veth2 2> /dev/null
 	ip netns del ns1 2> /dev/null
 	ip netns del ns2 2> /dev/null
 }