diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-07 08:50:34 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-08-07 08:50:34 -0700 |
commit | f536b3cae84eb7c9f3495285ad048d13a397ed0b (patch) | |
tree | b53eee1c45eb080168786e2f103e76d6706cbbb0 /tools/testing | |
parent | e669830526a0abaf301bf408df69cde33901ac63 (diff) | |
parent | 537e5400a0a05c4efe70e7b372c19cfcd0179362 (diff) | |
download | op-kernel-dev-f536b3cae84eb7c9f3495285ad048d13a397ed0b.zip op-kernel-dev-f536b3cae84eb7c9f3495285ad048d13a397ed0b.tar.gz |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc new goodies for 3.17. The short story:
The biggest bit is Michael removing all of pre-POWER4 processor
support from the 64-bit kernel. POWER3 and rs64. This gets rid of a
ton of old cruft that has been bitrotting in a long while. It was
broken for quite a few versions already and nobody noticed. Nobody
uses those machines anymore. While at it, he cleaned up a bunch of
old dusty cabinets, getting rid of a skeletton or two.
Then, we have some base VFIO support for KVM, which allows assigning
of PCI devices to KVM guests, support for large 64-bit BARs on
"powernv" platforms, support for HMI (Hardware Management Interrupts)
on those same platforms, some sparse-vmemmap improvements (for memory
hotplug),
There is the usual batch of Freescale embedded updates (summary in the
merge commit) and fixes here or there, I think that's it for the
highlights"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
powerpc/eeh: Export eeh_iommu_group_to_pe()
powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
powerpc: Reduce scariness of interrupt frames in stack traces
powerpc: start loop at section start of start in vmemmap_populated()
powerpc: implement vmemmap_free()
powerpc: implement vmemmap_remove_mapping() for BOOK3S
powerpc: implement vmemmap_list_free()
powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
powerpc/book3s: handle HMIs for cpus in nap mode.
powerpc/powernv: Invoke opal call to handle hmi.
powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
powerpc/iommu: Fix comments with it_page_shift
powerpc/powernv: Handle compound PE in config accessors
powerpc/powernv: Handle compound PE for EEH
powerpc/powernv: Handle compound PE
powerpc/powernv: Split ioda_eeh_get_state()
powerpc/powernv: Allow to freeze PE
powerpc/powernv: Enable M64 aperatus for PHB3
powerpc/eeh: Aux PE data for error log
...
Diffstat (limited to 'tools/testing')
-rw-r--r-- | tools/testing/selftests/powerpc/Makefile | 10 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/Makefile | 19 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/count_instructions.c | 30 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/ebb/Makefile | 5 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S | 271 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c | 91 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/ebb/ebb.c | 261 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/ebb/ebb.h | 1 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/l3_bank_test.c | 48 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/lib.c | 50 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/lib.h | 1 | ||||
-rw-r--r-- | tools/testing/selftests/powerpc/pmu/per_event_excludes.c | 114 |
12 files changed, 617 insertions, 284 deletions
diff --git a/tools/testing/selftests/powerpc/Makefile b/tools/testing/selftests/powerpc/Makefile index 54833a7..74a78ce 100644 --- a/tools/testing/selftests/powerpc/Makefile +++ b/tools/testing/selftests/powerpc/Makefile @@ -17,10 +17,10 @@ TARGETS = pmu copyloops mm tm endif -all: - @for TARGET in $(TARGETS); do \ - $(MAKE) -C $$TARGET all; \ - done; +all: $(TARGETS) + +$(TARGETS): + $(MAKE) -k -C $@ all run_tests: all @for TARGET in $(TARGETS); do \ @@ -36,4 +36,4 @@ clean: tags: find . -name '*.c' -o -name '*.h' | xargs ctags -.PHONY: all run_tests clean tags +.PHONY: all run_tests clean tags $(TARGETS) diff --git a/tools/testing/selftests/powerpc/pmu/Makefile b/tools/testing/selftests/powerpc/pmu/Makefile index b9ff0db..c9f4263 100644 --- a/tools/testing/selftests/powerpc/pmu/Makefile +++ b/tools/testing/selftests/powerpc/pmu/Makefile @@ -1,10 +1,12 @@ noarg: $(MAKE) -C ../ -PROGS := count_instructions -EXTRA_SOURCES := ../harness.c event.c +PROGS := count_instructions l3_bank_test per_event_excludes +EXTRA_SOURCES := ../harness.c event.c lib.c -all: $(PROGS) sub_all +SUB_TARGETS = ebb + +all: $(PROGS) $(SUB_TARGETS) $(PROGS): $(EXTRA_SOURCES) @@ -20,13 +22,8 @@ run_tests: all sub_run_tests clean: sub_clean rm -f $(PROGS) loop.o - -SUB_TARGETS = ebb - -sub_all: - @for TARGET in $(SUB_TARGETS); do \ - $(MAKE) -C $$TARGET all; \ - done; +$(SUB_TARGETS): + $(MAKE) -k -C $@ all sub_run_tests: all @for TARGET in $(SUB_TARGETS); do \ @@ -38,4 +35,4 @@ sub_clean: $(MAKE) -C $$TARGET clean; \ done; -.PHONY: all run_tests clean sub_all sub_run_tests sub_clean +.PHONY: all run_tests clean sub_run_tests sub_clean $(SUB_TARGETS) diff --git a/tools/testing/selftests/powerpc/pmu/count_instructions.c b/tools/testing/selftests/powerpc/pmu/count_instructions.c index 312b4f0..4622117 100644 --- a/tools/testing/selftests/powerpc/pmu/count_instructions.c +++ b/tools/testing/selftests/powerpc/pmu/count_instructions.c @@ -12,6 +12,7 @@ #include "event.h" #include "utils.h" +#include "lib.h" extern void thirty_two_instruction_loop(u64 loops); @@ -90,7 +91,7 @@ static u64 determine_overhead(struct event *events) return overhead; } -static int count_instructions(void) +static int test_body(void) { struct event events[2]; u64 overhead; @@ -111,17 +112,23 @@ static int count_instructions(void) overhead = determine_overhead(events); printf("Overhead of null loop: %llu instructions\n", overhead); - /* Run for 1M instructions */ - FAIL_IF(do_count_loop(events, 0x100000, overhead, true)); + /* Run for 1Mi instructions */ + FAIL_IF(do_count_loop(events, 1000000, overhead, true)); + + /* Run for 10Mi instructions */ + FAIL_IF(do_count_loop(events, 10000000, overhead, true)); + + /* Run for 100Mi instructions */ + FAIL_IF(do_count_loop(events, 100000000, overhead, true)); - /* Run for 10M instructions */ - FAIL_IF(do_count_loop(events, 0xa00000, overhead, true)); + /* Run for 1Bi instructions */ + FAIL_IF(do_count_loop(events, 1000000000, overhead, true)); - /* Run for 100M instructions */ - FAIL_IF(do_count_loop(events, 0x6400000, overhead, true)); + /* Run for 16Bi instructions */ + FAIL_IF(do_count_loop(events, 16000000000, overhead, true)); - /* Run for 1G instructions */ - FAIL_IF(do_count_loop(events, 0x40000000, overhead, true)); + /* Run for 64Bi instructions */ + FAIL_IF(do_count_loop(events, 64000000000, overhead, true)); event_close(&events[0]); event_close(&events[1]); @@ -129,6 +136,11 @@ static int count_instructions(void) return 0; } +static int count_instructions(void) +{ + return eat_cpu(test_body); +} + int main(void) { return test_harness(count_instructions, "count_instructions"); diff --git a/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/tools/testing/selftests/powerpc/pmu/ebb/Makefile index edbba2a..3dc4332 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/Makefile +++ b/tools/testing/selftests/powerpc/pmu/ebb/Makefile @@ -13,11 +13,12 @@ PROGS := reg_access_test event_attributes_test cycles_test \ close_clears_pmcc_test instruction_count_test \ fork_cleanup_test ebb_on_child_test \ ebb_on_willing_child_test back_to_back_ebbs_test \ - lost_exception_test no_handler_test + lost_exception_test no_handler_test \ + cycles_with_mmcr2_test all: $(PROGS) -$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c +$(PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S instruction_count_test: ../loop.S diff --git a/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S b/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S new file mode 100644 index 0000000..c7e4093 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S @@ -0,0 +1,271 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <ppc-asm.h> + + .text + +FUNC_START(core_busy_loop) + stdu %r1, -168(%r1) + std r14, 160(%r1) + std r15, 152(%r1) + std r16, 144(%r1) + std r17, 136(%r1) + std r18, 128(%r1) + std r19, 120(%r1) + std r20, 112(%r1) + std r21, 104(%r1) + std r22, 96(%r1) + std r23, 88(%r1) + std r24, 80(%r1) + std r25, 72(%r1) + std r26, 64(%r1) + std r27, 56(%r1) + std r28, 48(%r1) + std r29, 40(%r1) + std r30, 32(%r1) + std r31, 24(%r1) + + li r3, 0x3030 + std r3, -96(%r1) + li r4, 0x4040 + std r4, -104(%r1) + li r5, 0x5050 + std r5, -112(%r1) + li r6, 0x6060 + std r6, -120(%r1) + li r7, 0x7070 + std r7, -128(%r1) + li r8, 0x0808 + std r8, -136(%r1) + li r9, 0x0909 + std r9, -144(%r1) + li r10, 0x1010 + std r10, -152(%r1) + li r11, 0x1111 + std r11, -160(%r1) + li r14, 0x1414 + std r14, -168(%r1) + li r15, 0x1515 + std r15, -176(%r1) + li r16, 0x1616 + std r16, -184(%r1) + li r17, 0x1717 + std r17, -192(%r1) + li r18, 0x1818 + std r18, -200(%r1) + li r19, 0x1919 + std r19, -208(%r1) + li r20, 0x2020 + std r20, -216(%r1) + li r21, 0x2121 + std r21, -224(%r1) + li r22, 0x2222 + std r22, -232(%r1) + li r23, 0x2323 + std r23, -240(%r1) + li r24, 0x2424 + std r24, -248(%r1) + li r25, 0x2525 + std r25, -256(%r1) + li r26, 0x2626 + std r26, -264(%r1) + li r27, 0x2727 + std r27, -272(%r1) + li r28, 0x2828 + std r28, -280(%r1) + li r29, 0x2929 + std r29, -288(%r1) + li r30, 0x3030 + li r31, 0x3131 + + li r3, 0 +0: addi r3, r3, 1 + cmpwi r3, 100 + blt 0b + + /* Return 1 (fail) unless we get through all the checks */ + li r3, 1 + + /* Check none of our registers have been corrupted */ + cmpwi r4, 0x4040 + bne 1f + cmpwi r5, 0x5050 + bne 1f + cmpwi r6, 0x6060 + bne 1f + cmpwi r7, 0x7070 + bne 1f + cmpwi r8, 0x0808 + bne 1f + cmpwi r9, 0x0909 + bne 1f + cmpwi r10, 0x1010 + bne 1f + cmpwi r11, 0x1111 + bne 1f + cmpwi r14, 0x1414 + bne 1f + cmpwi r15, 0x1515 + bne 1f + cmpwi r16, 0x1616 + bne 1f + cmpwi r17, 0x1717 + bne 1f + cmpwi r18, 0x1818 + bne 1f + cmpwi r19, 0x1919 + bne 1f + cmpwi r20, 0x2020 + bne 1f + cmpwi r21, 0x2121 + bne 1f + cmpwi r22, 0x2222 + bne 1f + cmpwi r23, 0x2323 + bne 1f + cmpwi r24, 0x2424 + bne 1f + cmpwi r25, 0x2525 + bne 1f + cmpwi r26, 0x2626 + bne 1f + cmpwi r27, 0x2727 + bne 1f + cmpwi r28, 0x2828 + bne 1f + cmpwi r29, 0x2929 + bne 1f + cmpwi r30, 0x3030 + bne 1f + cmpwi r31, 0x3131 + bne 1f + + /* Load junk into all our registers before we reload them from the stack. */ + li r3, 0xde + li r4, 0xad + li r5, 0xbe + li r6, 0xef + li r7, 0xde + li r8, 0xad + li r9, 0xbe + li r10, 0xef + li r11, 0xde + li r14, 0xad + li r15, 0xbe + li r16, 0xef + li r17, 0xde + li r18, 0xad + li r19, 0xbe + li r20, 0xef + li r21, 0xde + li r22, 0xad + li r23, 0xbe + li r24, 0xef + li r25, 0xde + li r26, 0xad + li r27, 0xbe + li r28, 0xef + li r29, 0xdd + + ld r3, -96(%r1) + cmpwi r3, 0x3030 + bne 1f + ld r4, -104(%r1) + cmpwi r4, 0x4040 + bne 1f + ld r5, -112(%r1) + cmpwi r5, 0x5050 + bne 1f + ld r6, -120(%r1) + cmpwi r6, 0x6060 + bne 1f + ld r7, -128(%r1) + cmpwi r7, 0x7070 + bne 1f + ld r8, -136(%r1) + cmpwi r8, 0x0808 + bne 1f + ld r9, -144(%r1) + cmpwi r9, 0x0909 + bne 1f + ld r10, -152(%r1) + cmpwi r10, 0x1010 + bne 1f + ld r11, -160(%r1) + cmpwi r11, 0x1111 + bne 1f + ld r14, -168(%r1) + cmpwi r14, 0x1414 + bne 1f + ld r15, -176(%r1) + cmpwi r15, 0x1515 + bne 1f + ld r16, -184(%r1) + cmpwi r16, 0x1616 + bne 1f + ld r17, -192(%r1) + cmpwi r17, 0x1717 + bne 1f + ld r18, -200(%r1) + cmpwi r18, 0x1818 + bne 1f + ld r19, -208(%r1) + cmpwi r19, 0x1919 + bne 1f + ld r20, -216(%r1) + cmpwi r20, 0x2020 + bne 1f + ld r21, -224(%r1) + cmpwi r21, 0x2121 + bne 1f + ld r22, -232(%r1) + cmpwi r22, 0x2222 + bne 1f + ld r23, -240(%r1) + cmpwi r23, 0x2323 + bne 1f + ld r24, -248(%r1) + cmpwi r24, 0x2424 + bne 1f + ld r25, -256(%r1) + cmpwi r25, 0x2525 + bne 1f + ld r26, -264(%r1) + cmpwi r26, 0x2626 + bne 1f + ld r27, -272(%r1) + cmpwi r27, 0x2727 + bne 1f + ld r28, -280(%r1) + cmpwi r28, 0x2828 + bne 1f + ld r29, -288(%r1) + cmpwi r29, 0x2929 + bne 1f + + /* Load 0 (success) to return */ + li r3, 0 + +1: ld r14, 160(%r1) + ld r15, 152(%r1) + ld r16, 144(%r1) + ld r17, 136(%r1) + ld r18, 128(%r1) + ld r19, 120(%r1) + ld r20, 112(%r1) + ld r21, 104(%r1) + ld r22, 96(%r1) + ld r23, 88(%r1) + ld r24, 80(%r1) + ld r25, 72(%r1) + ld r26, 64(%r1) + ld r27, 56(%r1) + ld r28, 48(%r1) + ld r29, 40(%r1) + ld r30, 32(%r1) + ld r31, 24(%r1) + addi %r1, %r1, 168 + blr diff --git a/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c new file mode 100644 index 0000000..d43029b --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c @@ -0,0 +1,91 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdbool.h> + +#include "ebb.h" + + +/* + * Test of counting cycles while manipulating the user accessible bits in MMCR2. + */ + +/* We use two values because the first freezes PMC1 and so we would get no EBBs */ +#define MMCR2_EXPECTED_1 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */ +#define MMCR2_EXPECTED_2 0x0020100804020000UL /* ( FC2P|FC3P|FC4P|FC5P|FC6P) */ + + +int cycles_with_mmcr2(void) +{ + struct event event; + uint64_t val, expected[2], actual; + int i; + bool bad_mmcr2; + + event_init_named(&event, 0x1001e, "cycles"); + event_leader_ebb_init(&event); + + event.attr.exclude_kernel = 1; + event.attr.exclude_hv = 1; + event.attr.exclude_idle = 1; + + FAIL_IF(event_open(&event)); + + ebb_enable_pmc_counting(1); + setup_ebb_handler(standard_ebb_callee); + ebb_global_enable(); + + FAIL_IF(ebb_event_enable(&event)); + + mtspr(SPRN_PMC1, pmc_sample_period(sample_period)); + + /* XXX Set of MMCR2 must be after enable */ + expected[0] = MMCR2_EXPECTED_1; + expected[1] = MMCR2_EXPECTED_2; + i = 0; + bad_mmcr2 = false; + + /* Make sure we loop until we take at least one EBB */ + while ((ebb_state.stats.ebb_count < 20 && !bad_mmcr2) || + ebb_state.stats.ebb_count < 1) + { + mtspr(SPRN_MMCR2, expected[i % 2]); + + FAIL_IF(core_busy_loop()); + + val = mfspr(SPRN_MMCR2); + if (val != expected[i % 2]) { + bad_mmcr2 = true; + actual = val; + } + + i++; + } + + ebb_global_disable(); + ebb_freeze_pmcs(); + + count_pmc(1, sample_period); + + dump_ebb_state(); + + event_close(&event); + + FAIL_IF(ebb_state.stats.ebb_count == 0); + + if (bad_mmcr2) + printf("Bad MMCR2 value seen is 0x%lx\n", actual); + + FAIL_IF(bad_mmcr2); + + return 0; +} + +int main(void) +{ + return test_harness(cycles_with_mmcr2, "cycles_with_mmcr2"); +} diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c index 1b46be9..d7a72ce 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.c +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.c @@ -224,6 +224,7 @@ void dump_ebb_hw_state(void) printf("HW state:\n" \ "MMCR0 0x%016x %s\n" \ + "MMCR2 0x%016lx\n" \ "EBBHR 0x%016lx\n" \ "BESCR 0x%016llx %s\n" \ "PMC1 0x%016lx\n" \ @@ -233,10 +234,11 @@ void dump_ebb_hw_state(void) "PMC5 0x%016lx\n" \ "PMC6 0x%016lx\n" \ "SIAR 0x%016lx\n", - mmcr0, decode_mmcr0(mmcr0), mfspr(SPRN_EBBHR), bescr, - decode_bescr(bescr), mfspr(SPRN_PMC1), mfspr(SPRN_PMC2), - mfspr(SPRN_PMC3), mfspr(SPRN_PMC4), mfspr(SPRN_PMC5), - mfspr(SPRN_PMC6), mfspr(SPRN_SIAR)); + mmcr0, decode_mmcr0(mmcr0), mfspr(SPRN_MMCR2), + mfspr(SPRN_EBBHR), bescr, decode_bescr(bescr), + mfspr(SPRN_PMC1), mfspr(SPRN_PMC2), mfspr(SPRN_PMC3), + mfspr(SPRN_PMC4), mfspr(SPRN_PMC5), mfspr(SPRN_PMC6), + mfspr(SPRN_SIAR)); } void dump_ebb_state(void) @@ -335,257 +337,6 @@ void event_leader_ebb_init(struct event *e) e->attr.pinned = 1; } -int core_busy_loop(void) -{ - int rc; - - asm volatile ( - "li 3, 0x3030\n" - "std 3, -96(1)\n" - "li 4, 0x4040\n" - "std 4, -104(1)\n" - "li 5, 0x5050\n" - "std 5, -112(1)\n" - "li 6, 0x6060\n" - "std 6, -120(1)\n" - "li 7, 0x7070\n" - "std 7, -128(1)\n" - "li 8, 0x0808\n" - "std 8, -136(1)\n" - "li 9, 0x0909\n" - "std 9, -144(1)\n" - "li 10, 0x1010\n" - "std 10, -152(1)\n" - "li 11, 0x1111\n" - "std 11, -160(1)\n" - "li 14, 0x1414\n" - "std 14, -168(1)\n" - "li 15, 0x1515\n" - "std 15, -176(1)\n" - "li 16, 0x1616\n" - "std 16, -184(1)\n" - "li 17, 0x1717\n" - "std 17, -192(1)\n" - "li 18, 0x1818\n" - "std 18, -200(1)\n" - "li 19, 0x1919\n" - "std 19, -208(1)\n" - "li 20, 0x2020\n" - "std 20, -216(1)\n" - "li 21, 0x2121\n" - "std 21, -224(1)\n" - "li 22, 0x2222\n" - "std 22, -232(1)\n" - "li 23, 0x2323\n" - "std 23, -240(1)\n" - "li 24, 0x2424\n" - "std 24, -248(1)\n" - "li 25, 0x2525\n" - "std 25, -256(1)\n" - "li 26, 0x2626\n" - "std 26, -264(1)\n" - "li 27, 0x2727\n" - "std 27, -272(1)\n" - "li 28, 0x2828\n" - "std 28, -280(1)\n" - "li 29, 0x2929\n" - "std 29, -288(1)\n" - "li 30, 0x3030\n" - "li 31, 0x3131\n" - - "li 3, 0\n" - "0: " - "addi 3, 3, 1\n" - "cmpwi 3, 100\n" - "blt 0b\n" - - /* Return 1 (fail) unless we get through all the checks */ - "li 0, 1\n" - - /* Check none of our registers have been corrupted */ - "cmpwi 4, 0x4040\n" - "bne 1f\n" - "cmpwi 5, 0x5050\n" - "bne 1f\n" - "cmpwi 6, 0x6060\n" - "bne 1f\n" - "cmpwi 7, 0x7070\n" - "bne 1f\n" - "cmpwi 8, 0x0808\n" - "bne 1f\n" - "cmpwi 9, 0x0909\n" - "bne 1f\n" - "cmpwi 10, 0x1010\n" - "bne 1f\n" - "cmpwi 11, 0x1111\n" - "bne 1f\n" - "cmpwi 14, 0x1414\n" - "bne 1f\n" - "cmpwi 15, 0x1515\n" - "bne 1f\n" - "cmpwi 16, 0x1616\n" - "bne 1f\n" - "cmpwi 17, 0x1717\n" - "bne 1f\n" - "cmpwi 18, 0x1818\n" - "bne 1f\n" - "cmpwi 19, 0x1919\n" - "bne 1f\n" - "cmpwi 20, 0x2020\n" - "bne 1f\n" - "cmpwi 21, 0x2121\n" - "bne 1f\n" - "cmpwi 22, 0x2222\n" - "bne 1f\n" - "cmpwi 23, 0x2323\n" - "bne 1f\n" - "cmpwi 24, 0x2424\n" - "bne 1f\n" - "cmpwi 25, 0x2525\n" - "bne 1f\n" - "cmpwi 26, 0x2626\n" - "bne 1f\n" - "cmpwi 27, 0x2727\n" - "bne 1f\n" - "cmpwi 28, 0x2828\n" - "bne 1f\n" - "cmpwi 29, 0x2929\n" - "bne 1f\n" - "cmpwi 30, 0x3030\n" - "bne 1f\n" - "cmpwi 31, 0x3131\n" - "bne 1f\n" - - /* Load junk into all our registers before we reload them from the stack. */ - "li 3, 0xde\n" - "li 4, 0xad\n" - "li 5, 0xbe\n" - "li 6, 0xef\n" - "li 7, 0xde\n" - "li 8, 0xad\n" - "li 9, 0xbe\n" - "li 10, 0xef\n" - "li 11, 0xde\n" - "li 14, 0xad\n" - "li 15, 0xbe\n" - "li 16, 0xef\n" - "li 17, 0xde\n" - "li 18, 0xad\n" - "li 19, 0xbe\n" - "li 20, 0xef\n" - "li 21, 0xde\n" - "li 22, 0xad\n" - "li 23, 0xbe\n" - "li 24, 0xef\n" - "li 25, 0xde\n" - "li 26, 0xad\n" - "li 27, 0xbe\n" - "li 28, 0xef\n" - "li 29, 0xdd\n" - - "ld 3, -96(1)\n" - "cmpwi 3, 0x3030\n" - "bne 1f\n" - "ld 4, -104(1)\n" - "cmpwi 4, 0x4040\n" - "bne 1f\n" - "ld 5, -112(1)\n" - "cmpwi 5, 0x5050\n" - "bne 1f\n" - "ld 6, -120(1)\n" - "cmpwi 6, 0x6060\n" - "bne 1f\n" - "ld 7, -128(1)\n" - "cmpwi 7, 0x7070\n" - "bne 1f\n" - "ld 8, -136(1)\n" - "cmpwi 8, 0x0808\n" - "bne 1f\n" - "ld 9, -144(1)\n" - "cmpwi 9, 0x0909\n" - "bne 1f\n" - "ld 10, -152(1)\n" - "cmpwi 10, 0x1010\n" - "bne 1f\n" - "ld 11, -160(1)\n" - "cmpwi 11, 0x1111\n" - "bne 1f\n" - "ld 14, -168(1)\n" - "cmpwi 14, 0x1414\n" - "bne 1f\n" - "ld 15, -176(1)\n" - "cmpwi 15, 0x1515\n" - "bne 1f\n" - "ld 16, -184(1)\n" - "cmpwi 16, 0x1616\n" - "bne 1f\n" - "ld 17, -192(1)\n" - "cmpwi 17, 0x1717\n" - "bne 1f\n" - "ld 18, -200(1)\n" - "cmpwi 18, 0x1818\n" - "bne 1f\n" - "ld 19, -208(1)\n" - "cmpwi 19, 0x1919\n" - "bne 1f\n" - "ld 20, -216(1)\n" - "cmpwi 20, 0x2020\n" - "bne 1f\n" - "ld 21, -224(1)\n" - "cmpwi 21, 0x2121\n" - "bne 1f\n" - "ld 22, -232(1)\n" - "cmpwi 22, 0x2222\n" - "bne 1f\n" - "ld 23, -240(1)\n" - "cmpwi 23, 0x2323\n" - "bne 1f\n" - "ld 24, -248(1)\n" - "cmpwi 24, 0x2424\n" - "bne 1f\n" - "ld 25, -256(1)\n" - "cmpwi 25, 0x2525\n" - "bne 1f\n" - "ld 26, -264(1)\n" - "cmpwi 26, 0x2626\n" - "bne 1f\n" - "ld 27, -272(1)\n" - "cmpwi 27, 0x2727\n" - "bne 1f\n" - "ld 28, -280(1)\n" - "cmpwi 28, 0x2828\n" - "bne 1f\n" - "ld 29, -288(1)\n" - "cmpwi 29, 0x2929\n" - "bne 1f\n" - - /* Load 0 (success) to return */ - "li 0, 0\n" - - "1: mr %0, 0\n" - - : "=r" (rc) - : /* no inputs */ - : "3", "4", "5", "6", "7", "8", "9", "10", "11", "14", - "15", "16", "17", "18", "19", "20", "21", "22", "23", - "24", "25", "26", "27", "28", "29", "30", "31", - "memory" - ); - - return rc; -} - -int core_busy_loop_with_freeze(void) -{ - int rc; - - mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC); - rc = core_busy_loop(); - mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC); - - return rc; -} - int ebb_child(union pipe read_pipe, union pipe write_pipe) { struct event event; diff --git a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h index e62bde0..e44eee5 100644 --- a/tools/testing/selftests/powerpc/pmu/ebb/ebb.h +++ b/tools/testing/selftests/powerpc/pmu/ebb/ebb.h @@ -70,7 +70,6 @@ int ebb_check_mmcr0(void); extern u64 sample_period; int core_busy_loop(void); -int core_busy_loop_with_freeze(void); int ebb_child(union pipe read_pipe, union pipe write_pipe); int catch_sigill(void (*func)(void)); void write_pmc1(void); diff --git a/tools/testing/selftests/powerpc/pmu/l3_bank_test.c b/tools/testing/selftests/powerpc/pmu/l3_bank_test.c new file mode 100644 index 0000000..77472f3 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/l3_bank_test.c @@ -0,0 +1,48 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#include <stdio.h> +#include <stdlib.h> + +#include "event.h" +#include "utils.h" + +#define MALLOC_SIZE (0x10000 * 10) /* Ought to be enough .. */ + +/* + * Tests that the L3 bank handling is correct. We fixed it in commit e9aaac1. + */ +static int l3_bank_test(void) +{ + struct event event; + char *p; + int i; + + p = malloc(MALLOC_SIZE); + FAIL_IF(!p); + + event_init(&event, 0x84918F); + + FAIL_IF(event_open(&event)); + + for (i = 0; i < MALLOC_SIZE; i += 0x10000) + p[i] = i; + + event_read(&event); + event_report(&event); + + FAIL_IF(event.result.running == 0); + FAIL_IF(event.result.enabled == 0); + + event_close(&event); + free(p); + + return 0; +} + +int main(void) +{ + return test_harness(l3_bank_test, "l3_bank_test"); +} diff --git a/tools/testing/selftests/powerpc/pmu/lib.c b/tools/testing/selftests/powerpc/pmu/lib.c index 0f6a473..9768dea 100644 --- a/tools/testing/selftests/powerpc/pmu/lib.c +++ b/tools/testing/selftests/powerpc/pmu/lib.c @@ -5,10 +5,15 @@ #define _GNU_SOURCE /* For CPU_ZERO etc. */ +#include <elf.h> #include <errno.h> +#include <fcntl.h> +#include <link.h> #include <sched.h> #include <setjmp.h> #include <stdlib.h> +#include <sys/stat.h> +#include <sys/types.h> #include <sys/wait.h> #include "utils.h" @@ -177,8 +182,8 @@ struct addr_range libc, vdso; int parse_proc_maps(void) { + unsigned long start, end; char execute, name[128]; - uint64_t start, end; FILE *f; int rc; @@ -250,3 +255,46 @@ out_close: out: return rc; } + +static char auxv[4096]; + +void *get_auxv_entry(int type) +{ + ElfW(auxv_t) *p; + void *result; + ssize_t num; + int fd; + + fd = open("/proc/self/auxv", O_RDONLY); + if (fd == -1) { + perror("open"); + return NULL; + } + + result = NULL; + + num = read(fd, auxv, sizeof(auxv)); + if (num < 0) { + perror("read"); + goto out; + } + + if (num > sizeof(auxv)) { + printf("Overflowed auxv buffer\n"); + goto out; + } + + p = (ElfW(auxv_t) *)auxv; + + while (p->a_type != AT_NULL) { + if (p->a_type == type) { + result = (void *)p->a_un.a_val; + break; + } + + p++; + } +out: + close(fd); + return result; +} diff --git a/tools/testing/selftests/powerpc/pmu/lib.h b/tools/testing/selftests/powerpc/pmu/lib.h index ca5d72a..0f0339c 100644 --- a/tools/testing/selftests/powerpc/pmu/lib.h +++ b/tools/testing/selftests/powerpc/pmu/lib.h @@ -29,6 +29,7 @@ extern int notify_parent(union pipe write_pipe); extern int notify_parent_of_error(union pipe write_pipe); extern pid_t eat_cpu(int (test_function)(void)); extern bool require_paranoia_below(int level); +extern void *get_auxv_entry(int type); struct addr_range { uint64_t first, last; diff --git a/tools/testing/selftests/powerpc/pmu/per_event_excludes.c b/tools/testing/selftests/powerpc/pmu/per_event_excludes.c new file mode 100644 index 0000000..fddbbc9 --- /dev/null +++ b/tools/testing/selftests/powerpc/pmu/per_event_excludes.c @@ -0,0 +1,114 @@ +/* + * Copyright 2014, Michael Ellerman, IBM Corp. + * Licensed under GPLv2. + */ + +#define _GNU_SOURCE + +#include <elf.h> +#include <limits.h> +#include <stdio.h> +#include <stdbool.h> +#include <string.h> +#include <sys/prctl.h> + +#include "event.h" +#include "lib.h" +#include "utils.h" + +/* + * Test that per-event excludes work. + */ + +static int per_event_excludes(void) +{ + struct event *e, events[4]; + char *platform; + int i; + + platform = (char *)get_auxv_entry(AT_BASE_PLATFORM); + FAIL_IF(!platform); + SKIP_IF(strcmp(platform, "power8") != 0); + + /* + * We need to create the events disabled, otherwise the running/enabled + * counts don't match up. + */ + e = &events[0]; + event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS, + PERF_TYPE_HARDWARE, "instructions"); + e->attr.disabled = 1; + + e = &events[1]; + event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS, + PERF_TYPE_HARDWARE, "instructions(k)"); + e->attr.disabled = 1; + e->attr.exclude_user = 1; + e->attr.exclude_hv = 1; + + e = &events[2]; + event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS, + PERF_TYPE_HARDWARE, "instructions(h)"); + e->attr.disabled = 1; + e->attr.exclude_user = 1; + e->attr.exclude_kernel = 1; + + e = &events[3]; + event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS, + PERF_TYPE_HARDWARE, "instructions(u)"); + e->attr.disabled = 1; + e->attr.exclude_hv = 1; + e->attr.exclude_kernel = 1; + + FAIL_IF(event_open(&events[0])); + + /* + * The open here will fail if we don't have per event exclude support, + * because the second event has an incompatible set of exclude settings + * and we're asking for the events to be in a group. + */ + for (i = 1; i < 4; i++) + FAIL_IF(event_open_with_group(&events[i], events[0].fd)); + + /* + * Even though the above will fail without per-event excludes we keep + * testing in order to be thorough. + */ + prctl(PR_TASK_PERF_EVENTS_ENABLE); + + /* Spin for a while */ + for (i = 0; i < INT_MAX; i++) + asm volatile("" : : : "memory"); + + prctl(PR_TASK_PERF_EVENTS_DISABLE); + + for (i = 0; i < 4; i++) { + FAIL_IF(event_read(&events[i])); + event_report(&events[i]); + } + + /* + * We should see that all events have enabled == running. That + * shows that they were all on the PMU at once. + */ + for (i = 0; i < 4; i++) + FAIL_IF(events[i].result.running != events[i].result.enabled); + + /* + * We can also check that the result for instructions is >= all the + * other counts. That's because it is counting all instructions while + * the others are counting a subset. + */ + for (i = 1; i < 4; i++) + FAIL_IF(events[0].result.value < events[i].result.value); + + for (i = 0; i < 4; i++) + event_close(&events[i]); + + return 0; +} + +int main(void) +{ + return test_harness(per_event_excludes, "per_event_excludes"); +} |