Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support offloading wireless authentication to userspace via
    NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.

 2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
    Setup and cleanup of namespaces now all run asynchronously and thus
    performance is significantly increased.

 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
    Streiff.

 4) Support zerocopy on RDS sockets, from Sowmini Varadhan.

 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
    Borkmann.

 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
    Chevallier.

 7) Support grafting of child qdiscs in mlxsw driver, from Nogah
    Frankel.

 8) Add packet forwarding tests to selftests, from Ido Schimmel.

 9) Deal with sub-optimal GSO packets better in BBR congestion control,
    from Eric Dumazet.

10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.

11) Add path MTU tests to selftests, from Stefano Brivio.

12) Various bits of IPSEC offloading support for mlx5, from Aviad
    Yehezkel, Yossi Kuperman, and Saeed Mahameed.

13) Support RSS spreading on ntuple filters in SFC driver, from Edward
    Cree.

14) Lots of sockmap work from John Fastabend. Applications can use eBPF
    to filter sendmsg and sendpage operations.

15) In-kernel receive TLS support, from Dave Watson.

16) Add XDP support to ixgbevf, this is significant because it should
    allow optimized XDP usage in various cloud environments. From Tony
    Nguyen.

17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
    Venkataramanan et al.

18) IP fragmentation match offload support in nfp driver, from Pieter
    Jansen van Vuuren.

19) Support XDP redirect in i40e driver, from Björn Töpel.

20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
    tracepoints in their raw form, from Alexei Starovoitov.

21) Lots of striding RQ improvements to mlx5 driver with many
    performance improvements, from Tariq Toukan.

22) Use rhashtable for inet frag reassembly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
  net: mvneta: improve suspend/resume
  net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
  ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
  net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
  net: bgmac: Correctly annotate register space
  route: check sysctl_fib_multipath_use_neigh earlier than hash
  fix typo in command value in drivers/net/phy/mdio-bitbang.
  sky2: Increase D3 delay to sky2 stops working after suspend
  net/mlx5e: Set EQE based as default TX interrupt moderation mode
  ibmvnic: Disable irqs before exiting reset from closed state
  net: sched: do not emit messages while holding spinlock
  vlan: also check phy_driver ts_info for vlan's real device
  Bluetooth: Mark expected switch fall-throughs
  Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
  Bluetooth: btrsi: remove unused including <linux/version.h>
  Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
  sh_eth: kill useless check in __sh_eth_get_regs()
  sh_eth: add sh_eth_cpu_data::no_xdfar flag
  ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
  ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
  ...

9 files changed, 1999 insertions, 0 deletions

diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json b/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json
new file mode 100644
index 0000000..5b012f4
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json
@@ -0,0 +1,289 @@
+[
+    {
+        "id": "d959",
+        "name": "Add cBPF action with valid bytecode",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC action flush action bpf",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action get action bpf index 100",
+        "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*index 100 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC action flush action bpf"
+        ]
+    },
+    {
+        "id": "f84a",
+        "name": "Add cBPF action with invalid bytecode",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100",
+        "expExitCode": "255",
+        "verifyCmd": "$TC action get action bpf index 100",
+        "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*index 100 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action bpf"
+        ]
+    },
+    {
+        "id": "e939",
+        "name": "Add eBPF action with valid object-file",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            "printf '#include <linux/bpf.h>\nchar l[] __attribute__((section(\"license\"),used))=\"GPL\"; __attribute__((section(\"action\"),used)) int m(struct __sk_buff *s) { return 2; }' | clang -O2 -x c -c - -target bpf -o _b.o",
+            [
+                "$TC action flush action bpf",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action add action bpf object-file _b.o index 667",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action get action bpf index 667",
+        "matchPattern": "action order [0-9]*: bpf _b.o:\\[action\\] id [0-9]* tag 3b185187f1855c4c default-action pipe.*index 667 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC action flush action bpf",
+            "rm -f _b.o"
+        ]
+    },
+    {
+        "id": "282d",
+        "name": "Add eBPF action with invalid object-file",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            "printf '#include <linux/bpf.h>\nchar l[] __attribute__((section(\"license\"),used))=\"GPL\"; __attribute__((section(\"action\"),used)) int m(struct __sk_buff *s) { s->data = 0x0; return 2; }' | clang -O2 -x c -c - -target bpf -o _c.o",
+            [
+                "$TC action flush action bpf",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action add action bpf object-file _c.o index 667",
+        "expExitCode": "255",
+        "verifyCmd": "$TC action get action bpf index 667",
+        "matchPattern": "action order [0-9]*: bpf _b.o:\\[action\\] id [0-9].*index 667 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC action flush action bpf",
+            "rm -f _c.o"
+        ]
+    },
+    {
+        "id": "d819",
+        "name": "Replace cBPF bytecode and action control",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ],
+            [
+                "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 555",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action replace action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' drop index 555",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action get action bpf index 555",
+        "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' default-action drop.*index 555 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC action flush action bpf"
+        ]
+    },
+    {
+        "id": "6ae3",
+        "name": "Delete cBPF action ",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ],
+            [
+                "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 444",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action delete action bpf index 444",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action get action bpf index 444",
+        "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*index 444 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC action flush action bpf"
+        ]
+    },
+    {
+        "id": "3e0d",
+        "name": "List cBPF actions",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC action flush action bpf",
+                0,
+                1,
+                255
+            ],
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' ok index 101",
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' drop index 102",
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 33024,6 0 0 262144,6 0 0 0' continue index 103"
+        ],
+        "cmdUnderTest": "$TC action list action bpf",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action list action bpf",
+        "matchPattern": "action order [0-9]*: bpf bytecode",
+        "matchCount": "3",
+        "teardown": [
+            "$TC actions flush action bpf"
+        ]
+    },
+    {
+        "id": "55ce",
+        "name": "Flush BPF actions",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ],
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' ok index 101",
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' drop index 102",
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 33024,6 0 0 262144,6 0 0 0' continue index 103"
+        ],
+        "cmdUnderTest": "$TC action flush action bpf",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action list action bpf",
+        "matchPattern": "action order [0-9]*: bpf bytecode",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action bpf"
+        ]
+    },
+    {
+        "id": "ccc3",
+        "name": "Add cBPF action with duplicate index",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ],
+            "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 4294967295"
+        ],
+        "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' index 4294967295",
+        "expExitCode": "255",
+        "verifyCmd": "$TC action get action bpf index 4294967295",
+        "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*index 4294967295",
+        "matchCount": "1",
+        "teardown": [
+            "$TC action flush action bpf"
+        ]
+    },
+    {
+        "id": "89c7",
+        "name": "Add cBPF action with invalid index",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' index 4294967296 cookie 12345",
+        "expExitCode": "255",
+        "verifyCmd": "$TC action ls action bpf",
+        "matchPattern": "action order [0-9]*: bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' default-action pipe.*cookie 12345",
+        "matchCount": "0",
+        "teardown": [
+            "$TC action flush action bpf"
+        ]
+    },
+    {
+        "id": "7ab9",
+        "name": "Add cBPF action with cookie",
+        "category": [
+            "actions",
+            "bpf"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action bpf",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC action add action bpf bytecode '4,40 0 0 12,21 0 1 2054,6 0 0 262144,6 0 0 0' cookie d0d0d0d0d0d0d0d0",
+        "expExitCode": "0",
+        "verifyCmd": "$TC action list action bpf",
+        "matchPattern": "action order [0-9]*: bpf.*cookie d0d0d0d0d0d0d0",
+        "matchCount": "1",
+        "teardown": [
+            "$TC action flush action bpf"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json b/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json
new file mode 100644
index 0000000..70952bd
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json
@@ -0,0 +1,291 @@
+[
+    {
+        "id": "2002",
+        "name": "Add valid connmark action with defaults",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action connmark",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "56a5",
+        "name": "Add valid connmark action with control pass",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark pass index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action connmark index 1",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 pass.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "7c66",
+        "name": "Add valid connmark action with control drop",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark drop index 100",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action connmark index 100",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 drop.*index 100 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "a913",
+        "name": "Add valid connmark action with control pipe",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark pipe index 455",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action connmark index 455",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 pipe.*index 455 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "bdd8",
+        "name": "Add valid connmark action with control reclassify",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark reclassify index 7",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action connmark",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 reclassify.*index 7 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "b8be",
+        "name": "Add valid connmark action with control continue",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark continue index 17",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action connmark",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 continue.*index 17 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "d8a6",
+        "name": "Add valid connmark action with control jump",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark jump 10 index 17",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action connmark",
+        "matchPattern": "action order [0-9]+:  connmark zone 0 jump 10.*index 17 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "aae8",
+        "name": "Add valid connmark action with zone argument",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark zone 100 pipe index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action connmark index 1",
+        "matchPattern": "action order [0-9]+:  connmark zone 100 pipe.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "2f0b",
+        "name": "Add valid connmark action with invalid zone argument",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark zone 65536 reclassify index 21",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action connmark index 1",
+        "matchPattern": "action order [0-9]+:  connmark zone 65536 reclassify.*index 21 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "9305",
+        "name": "Add connmark action with unsupported argument",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark zone 655 unsupp_arg pass index 2",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action connmark index 2",
+        "matchPattern": "action order [0-9]+:  connmark zone 655 unsupp_arg pass.*index 2 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "71ca",
+        "name": "Add valid connmark action and replace it",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action connmark zone 777 pass index 555"
+        ],
+        "cmdUnderTest": "$TC actions replace action connmark zone 555 reclassify index 555",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action connmark index 555",
+        "matchPattern": "action order [0-9]+:  connmark zone 555 reclassify.*index 555 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    },
+    {
+        "id": "5f8f",
+        "name": "Add valid connmark action with cookie",
+        "category": [
+            "actions",
+            "connmark"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action connmark",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action connmark zone 555 pipe index 5 cookie aabbccddeeff112233445566778800a1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action connmark index 5",
+        "matchPattern": "action order [0-9]+:  connmark zone 555 pipe.*index 5 ref.*cookie aabbccddeeff112233445566778800a1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action connmark"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
new file mode 100644
index 0000000..93cf8fe
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
@@ -0,0 +1,410 @@
+[
+    {
+        "id": "6d84",
+        "name": "Add csum iph action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum iph index 800",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 800",
+        "matchPattern": "action order [0-9]*: csum \\(iph\\) action pass.*index 800 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "1862",
+        "name": "Add csum ip4h action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum ip4h index 7",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 7",
+        "matchPattern": "action order [0-9]*: csum \\(iph\\) action pass.*index 7 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "15c6",
+        "name": "Add csum ipv4h action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum ipv4h index 1122",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 1122",
+        "matchPattern": "action order [0-9]*: csum \\(iph\\) action pass.*index 1122 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "bf47",
+        "name": "Add csum icmp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum icmp index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 1",
+        "matchPattern": "action order [0-9]*: csum \\(icmp\\) action pass.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "cc1d",
+        "name": "Add csum igmp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum igmp index 999",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 999",
+        "matchPattern": "action order [0-9]*: csum \\(igmp\\) action pass.*index 999 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "bccc",
+        "name": "Add csum foobar action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum foobar index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action csum",
+        "matchPattern": "action order [0-9]*: csum \\(foobar\\) action pass.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "3bb4",
+        "name": "Add csum tcp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum tcp index 9999",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 9999",
+        "matchPattern": "action order [0-9]*: csum \\(tcp\\) action pass.*index 9999 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "759c",
+        "name": "Add csum udp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum udp index 334455",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 334455",
+        "matchPattern": "action order [0-9]*: csum \\(udp\\) action pass.*index 334455 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "bdb6",
+        "name": "Add csum udp xor iph action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum udp xor iph index 3",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action csum",
+        "matchPattern": "action order [0-9]*: csum \\(udp xor iph\\) action pass.*index 3 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "c220",
+        "name": "Add csum udplite action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum udplite continue index 3",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 3",
+        "matchPattern": "action order [0-9]*: csum \\(udplite\\) action continue.*index 3 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "8993",
+        "name": "Add csum sctp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum sctp index 777",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 777",
+        "matchPattern": "action order [0-9]*: csum \\(sctp\\) action pass.*index 777 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "b138",
+        "name": "Add csum ip & icmp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum ip and icmp pipe index 123",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 123",
+        "matchPattern": "action order [0-9]*: csum \\(iph, icmp\\) action pipe.*index 123 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "eeda",
+        "name": "Add csum ip & sctp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum ipv4h sctp continue index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 2",
+        "matchPattern": "action order [0-9]*: csum \\(iph, sctp\\) action continue.*index 2 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "0017",
+        "name": "Add csum udp or tcp action",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum udp or tcp continue index 27",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 27",
+        "matchPattern": "action order [0-9]*: csum \\(tcp, udp\\) action continue.*index 27 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "ce92",
+        "name": "Add csum udp action with cookie",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum udp pipe index 7 cookie 12345678",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 7",
+        "matchPattern": "action order [0-9]*: csum \\(udp\\) action pipe.*index 7.*cookie 12345678",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "912f",
+        "name": "Add csum icmp action with large cookie",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum icmp pipe index 17 cookie aabbccddeeff1122",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 17",
+        "matchPattern": "action order [0-9]*: csum \\(icmp\\) action pipe.*index 17.*cookie aabbccddeeff1122",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
+        "id": "879b",
+        "name": "Add batch of 32 csum tcp actions",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "for i in `seq 1 32`; do cmd=\"action csum tcp continue index $i \"; args=\"$args$cmd\"; done && $TC actions add $args",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action csum",
+        "matchPattern": "^[ \t]+index [0-9]* ref",
+        "matchCount": "32",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json b/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json
index e2187b6..68c9102 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/gact.json
@@ -465,5 +465,76 @@
         "teardown": [
             "$TC actions flush action gact"
         ]
+    },
+    {
+        "id": "1021",
+        "name": "Add batch of 32 gact pass actions",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action pass index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "^[ \t]+index [0-9]+ ref",
+        "matchCount": "32",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "da7a",
+        "name": "Add batch of 32 gact continue actions with cookie",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action continue index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "^[ \t]+index [0-9]+ ref",
+        "matchCount": "32",
+        "teardown": [
+            "$TC actions flush action gact"
+        ]
+    },
+    {
+        "id": "8aa3",
+        "name": "Delete batch of 32 gact continue actions",
+        "category": [
+            "actions",
+            "gact"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action gact",
+                0,
+                1,
+                255
+            ],
+            "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action continue index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\""
+        ],
+        "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action gact index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action gact",
+        "matchPattern": "^[ \t]+index [0-9]+ ref",
+        "matchCount": "0",
+        "teardown": []
     }
 ]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
index 0fcccf1..443c9b3 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
@@ -171,6 +171,198 @@
         ]
     },
     {
+        "id": "8917",
+        "name": "Add mirred mirror action with control pass",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo pass index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 1",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) pass.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "1054",
+        "name": "Add mirred mirror action with control pipe",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo pipe index 15",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 15",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) pipe.*index 15 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "9887",
+        "name": "Add mirred mirror action with control continue",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo continue index 15",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 15",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) continue.*index 15 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "e4aa",
+        "name": "Add mirred mirror action with control reclassify",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo reclassify index 150",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 150",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) reclassify.*index 150 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "ece9",
+        "name": "Add mirred mirror action with control drop",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo drop index 99",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 99",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) drop.*index 99 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "0031",
+        "name": "Add mirred mirror action with control jump",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo jump 10 index 99",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 99",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) jump 10.*index 99 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "407c",
+        "name": "Add mirred mirror action with cookie",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo reclassify cookie aa11bb22cc33dd44ee55",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action mirred",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) reclassify.*cookie aa11bb22cc33dd44ee55",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
+        "id": "8b69",
+        "name": "Add mirred mirror action with maximum index",
+        "category": [
+            "actions",
+            "mirred"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action mirred",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action mirred ingress mirror dev lo pipe index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 4294967295",
+        "matchPattern": "action order [0-9]*: mirred \\(Ingress Mirror to device lo\\) pipe.*index 4294967295",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
         "id": "a70e",
         "name": "Delete mirred mirror action",
         "category": [
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/police.json b/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
index 0e602a3..38d85a1 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/police.json
@@ -265,6 +265,150 @@
         ]
     },
     {
+        "id": "ddd6",
+        "name": "Add police action with invalid rate value",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 3tb burst 250k conform-exceed pass/pipe index 5",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x5 rate 3Tb burst 250Kb mtu 2Kb action pass/pipe",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "f61c",
+        "name": "Add police action with invalid burst value",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 3kbit burst 250P conform-exceed pass/pipe index 5",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x5 rate 3Kbit burst 250Pb mtu 2Kb action pass/pipe",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "c26f",
+        "name": "Add police action with invalid peakrate value",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 90kbit burst 10k mtu 2kb peakrate 100T index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 90Kbit burst 10Kb mtu 2Kb peakrate 100Tbit",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "db04",
+        "name": "Add police action with invalid mtu value",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 10kbit burst 10k mtu 2Pbit index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions ls action police",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 10Kbit burst 1Kb mtu 2Pb",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "f3c9",
+        "name": "Add police action with cookie",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 10mbit burst 10k index 1 cookie a1b1c1d1e1f12233bb",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action police index 1",
+        "matchPattern": "action order [0-9]*:  police 0x1 rate 10Mbit burst 10Kb mtu 2Kb.*cookie a1b1c1d1e1f12233bb",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action police"
+        ]
+    },
+    {
+        "id": "d190",
+        "name": "Add police action with maximum index",
+        "category": [
+            "actions",
+            "police"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action police",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action police rate 10mbit burst 10k index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action mirred index 4294967295",
+        "matchPattern": "action order [0-9]*:  police 0xffffffff rate 10Mbit burst 10Kb mtu 2Kb",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action mirred"
+        ]
+    },
+    {
         "id": "336e",
         "name": "Delete police action",
         "category": [
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
index 99635ea..37ecc27 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
@@ -216,6 +216,174 @@
         ]
     },
     {
+        "id": "464a",
+        "name": "Add skbedit action with control pipe",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit ptype host pipe index 11",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 11",
+        "matchPattern": "action order [0-9]*:  skbedit ptype host pipe.*index 11 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "212f",
+        "name": "Add skbedit action with control reclassify",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit mark 56789 reclassify index 90",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 90",
+        "matchPattern": "action order [0-9]*:  skbedit mark 56789 reclassify.*index 90 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "0651",
+        "name": "Add skbedit action with control pass",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit queue_mapping 3 pass index 271",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 271",
+        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 3 pass.*index 271 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "cc53",
+        "name": "Add skbedit action with control drop",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit queue_mapping 3 drop index 271",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 271",
+        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 3 drop.*index 271 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "ec16",
+        "name": "Add skbedit action with control jump",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit priority 8 jump 9 index 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 2",
+        "matchPattern": "action order [0-9]*:  skbedit priority :8 jump 9.*index 2 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "db54",
+        "name": "Add skbedit action with control continue",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit priority 16 continue index 32",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 32",
+        "matchPattern": "action order [0-9]*:  skbedit priority :16 continue.*index 32 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
+        "id": "1055",
+        "name": "Add skbedit action with cookie",
+        "category": [
+            "actions",
+            "skbedit"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbedit",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbedit priority 16 continue index 32 cookie deadbeef",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbedit index 32",
+        "matchPattern": "action order [0-9]*:  skbedit priority :16 continue.*index 32 ref.*cookie deadbeef",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbedit"
+        ]
+    },
+    {
         "id": "5172",
         "name": "List skbedit actions",
         "category": [
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json
index 90bba48..fe3326e 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json
@@ -264,6 +264,30 @@
         ]
     },
     {
+        "id": "6046",
+        "name": "Add skbmod action with control reclassify and cookie",
+        "category": [
+            "actions",
+            "skbmod"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action skbmod",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action skbmod set smac 00:01:02:03:04:01 reclassify index 1 cookie ddeeffaabb11cc22",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action skbmod index 1",
+        "matchPattern": "action order [0-9]*: skbmod reclassify set smac 00:01:02:03:04:01.*index 1 ref.*cookie ddeeffaabb11cc22",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action skbmod"
+        ]
+    },
+    {
         "id": "58cb",
         "name": "List skbmod actions",
         "category": [
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json
new file mode 100644
index 0000000..4510ddf
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json
@@ -0,0 +1,410 @@
+[
+    {
+        "id": "6f5a",
+        "name": "Add vlan pop action",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "ee6f",
+        "name": "Add vlan pop action with large index",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*index 4294967295 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "b6b9",
+        "name": "Add vlan pop action with jump opcode",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop jump 10 index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*jump 10.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "87c3",
+        "name": "Add vlan pop action with trap opcode",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan pop trap index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*pop trap.*index 8 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "2b91",
+        "name": "Add vlan invalid action",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan bad_mode",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*bad_mode",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "57fc",
+        "name": "Add vlan action with invalid protocol type",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push protocol ABCD",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*push",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "3989",
+        "name": "Add vlan push action with default protocol and priority",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 123 index 18",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 18",
+        "matchPattern": "action order [0-9]+: vlan.*push id 123 protocol 802.1Q priority 0 pipe.*index 18 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "79dc",
+        "name": "Add vlan push action with protocol 802.1Q and priority 3",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 77 protocol 802.1Q priority 3 continue index 734",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 734",
+        "matchPattern": "action order [0-9]+: vlan.*push id 77 protocol 802.1Q priority 3 continue.*index 734 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "4d73",
+        "name": "Add vlan push action with protocol 802.1AD",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 1024 protocol 802.1AD pass index 10000",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 10000",
+        "matchPattern": "action order [0-9]+: vlan.*push id 1024 protocol 802.1ad priority 0 pass.*index 10000 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "1f7b",
+        "name": "Add vlan push action with invalid vlan ID",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 5678 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*push id 5678.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "5d02",
+        "name": "Add vlan push action with invalid IEEE 802.1p priority",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 5 priority 10 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*push id 5.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "6812",
+        "name": "Add vlan modify action for protocol 802.1Q",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan modify protocol 802.1Q id 5 index 100",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 100",
+        "matchPattern": "action order [0-9]+: vlan.*modify id 100 protocol 802.1Q priority 0 pipe.*index 100 ref",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "5a31",
+        "name": "Add vlan modify action for protocol 802.1AD",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan modify protocol 802.1ad id 500 reclassify index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action vlan index 12",
+        "matchPattern": "action order [0-9]+: vlan.*modify id 500 protocol 802.1ad priority 0 reclassify.*index 12 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    },
+    {
+        "id": "83a4",
+        "name": "Delete vlan pop action",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan pop index 44"
+        ],
+        "cmdUnderTest": "$TC actions del action vlan index 44",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*pop.*index 44 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "ed1e",
+        "name": "Delete vlan push action for protocol 802.1Q",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan push id 4094 protocol 802.1Q index 999"
+        ],
+        "cmdUnderTest": "$TC actions del action vlan index 999",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*push id 4094 protocol 802.1Q priority 0 pipe.*index 999 ref",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "a2a3",
+        "name": "Flush vlan actions",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action vlan push id 4 protocol 802.1ad index 10",
+            "$TC actions add action vlan push id 4 protocol 802.1ad index 11",
+            "$TC actions add action vlan push id 4 protocol 802.1ad index 12",
+            "$TC actions add action vlan push id 4 protocol 802.1ad index 13"
+        ],
+        "cmdUnderTest": "$TC actions flush action vlan",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*push id 4 protocol 802.1ad",
+        "matchCount": "0",
+        "teardown": []
+    },
+    {
+        "id": "1d78",
+        "name": "Add vlan action with cookie",
+        "category": [
+            "actions",
+            "vlan"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action vlan",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action vlan push id 4 cookie a0a0a0a0a0a0a0",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action vlan",
+        "matchPattern": "action order [0-9]+: vlan.*push id 4.*cookie a0a0a0a0a0a0a0",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action vlan"
+        ]
+    }
+]