tools/power turbostat: relax dependency on APERF_MSR

While turbostat is significantly less useful on systems
with no APERF_MSR, it seems more friendly
to run on such systems and report what we can,
rather than refusing to run.

Update man page to reflect recent changes.

Signed-off-by: Len Brown <len.brown@intel.com>

2 files changed, 68 insertions, 45 deletions

diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index 56bfb52..9b95069 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -12,16 +12,16 @@ turbostat \- Report processor frequency and idle statistics
 .RB [ "\-i interval_sec" ]
 .SH DESCRIPTION
 \fBturbostat \fP reports processor topology, frequency,
-idle power-state statistics, temperature and power on modern X86 processors.
-Either \fBcommand\fP is forked and statistics are printed
-upon its completion, or statistics are printed periodically.
-
-\fBturbostat \fP
-must be run on root, and
-minimally requires that the processor
-supports an "invariant" TSC, plus the APERF and MPERF MSRs.
-Additional information is reported depending on hardware counter support.
-
+idle power-state statistics, temperature and power on X86 processors.
+There are two ways to invoke turbostat.
+The first method is to supply a
+\fBcommand\fP, which is forked and statistics are printed
+upon its completion.
+The second method is to omit the command,
+and turbodstat will print statistics every 5 seconds.
+The 5-second interval can changed using the -i option.
+
+Some information is not availalbe on older processors.
 .SS Options
 The \fB-p\fP option limits output to the 1st thread in 1st core of each package.
 .PP
@@ -130,12 +130,13 @@ cpu3: MSR_IA32_THERM_STATUS: 0x884e0000 (27 C +/- 1)
  ...
 .fi
 The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency
-available at the minimum package voltage.  The \fBTSC frequency\fP is the nominal
-maximum frequency of the processor if turbo-mode were not available.  This frequency
+available at the minimum package voltage.  The \fBTSC frequency\fP is the base
+frequency of the processor -- this should match the brand string
+in /proc/cpuinfo.  This base frequency
 should be sustainable on all CPUs indefinitely, given nominal power and cooling.
 The remaining rows show what maximum turbo frequency is possible
-depending on the number of idle cores.  Note that this information is
-not available on all processors.
+depending on the number of idle cores.  Note that not all information is
+available on all processors.
 .SH FORK EXAMPLE
 If turbostat is invoked with a command, it will fork that command
 and output the statistics gathered when the command exits.
@@ -176,6 +177,11 @@ not including any non-busy idle time.
 
 .B "turbostat "
 must be run as root.
+Alternatively, non-root users can be enabled to run turbostat this way:
+
+# setcap cap_sys_rawio=ep ./turbostat
+
+# chmod +r /dev/cpu/*/msr
 
 .B "turbostat "
 reads hardware counters, but doesn't write them.
@@ -184,15 +190,33 @@ multiple invocations of itself.
 
 \fBturbostat \fP
 may work poorly on Linux-2.6.20 through 2.6.29,
-as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF
+as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF MSRs
 in those kernels.
 
-If the TSC column does not make sense, then
-the other numbers will also make no sense.
-Turbostat is lightweight, and its data collection is not atomic.
-These issues are usually caused by an extremely short measurement
-interval (much less than 1 second), or system activity that prevents
-turbostat from being able to run on all CPUS to quickly collect data.
+AVG_MHz = APERF_delta/measurement_interval.  This is the actual
+number of elapsed cycles divided by the entire sample interval --
+including idle time.  Note that this calculation is resiliant
+to systems lacking a non-stop TSC.
+
+TSC_MHz = TSC_delta/measurement_interval.
+On a system with an invariant TSC, this value will be constant
+and will closely match the base frequency value shown
+in the brand string in /proc/cpuinfo.  On a system where
+the TSC stops in idle, TSC_MHz will drop
+below the processor's base frequency.
+
+%Busy = MPERF_delta/TSC_delta
+
+Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
+
+Note that these calculations depend on TSC_delta, so they
+are not reliable during intervals when TSC_MHz is not running at the base frequency.
+
+Turbostat data collection is not atomic.
+Extremely short measurement intervals (much less than 1 second),
+or system activity that prevents turbostat from being able
+to run on all CPUS to quickly collect data, will result in
+inconsistent results.
 
 The APERF, MPERF MSRs are defined to count non-halted cycles.
 Although it is not guaranteed by the architecture, turbostat assumes
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index b654b64..a02c02f 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -673,24 +673,26 @@ delta_thread(struct thread_data *new, struct thread_data *old,
 
 	old->c1 = new->c1 - old->c1;
 
-	if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) {
-		old->aperf = new->aperf - old->aperf;
-		old->mperf = new->mperf - old->mperf;
-	} else {
+	if (has_aperf) {
+		if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) {
+			old->aperf = new->aperf - old->aperf;
+			old->mperf = new->mperf - old->mperf;
+		} else {
 
-		if (!aperf_mperf_unstable) {
-			fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
-			fprintf(stderr, "* Frequency results do not cover entire interval *\n");
-			fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
+			if (!aperf_mperf_unstable) {
+				fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
+				fprintf(stderr, "* Frequency results do not cover entire interval *\n");
+				fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
 
-			aperf_mperf_unstable = 1;
+				aperf_mperf_unstable = 1;
+			}
+			/*
+			 * mperf delta is likely a huge "positive" number
+			 * can not use it for calculating c0 time
+			 */
+			skip_c0 = 1;
+			skip_c1 = 1;
 		}
-		/*
-		 * mperf delta is likely a huge "positive" number
-		 * can not use it for calculating c0 time
-		 */
-		skip_c0 = 1;
-		skip_c1 = 1;
 	}
 
 
@@ -2244,14 +2246,11 @@ void check_cpuid()
 	has_epb = ecx & (1 << 3);
 
 	if (verbose)
-		fprintf(stderr, "CPUID(6): %s%s%s%s\n",
-			has_aperf ? "APERF" : "No APERF!",
-			do_dts ? ", DTS" : "",
-			do_ptm ? ", PTM": "",
-			has_epb ? ", EPB": "");
-
-	if (!has_aperf)
-		errx(-1, "No APERF");
+		fprintf(stderr, "CPUID(6): %sAPERF, %sDTS, %sPTM, %sEPB\n",
+			has_aperf ? "" : "No ",
+			do_dts ? "" : "No ",
+			do_ptm ? "" : "No ",
+			has_epb ? "" : "No ");
 
 	do_nhm_platform_info = do_nhm_cstates = do_smi = has_nhm_msrs(family, model);
 	do_snb_cstates = has_snb_msrs(family, model);
@@ -2632,7 +2631,7 @@ int main(int argc, char **argv)
 	cmdline(argc, argv);
 
 	if (verbose)
-		fprintf(stderr, "turbostat v3.8 14-Aug 2014"
+		fprintf(stderr, "turbostat v3.9 23-Jan, 2015"
 			" - Len Brown <lenb@kernel.org>\n");
 
 	turbostat_init();