Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

4 files changed, 401 insertions, 5 deletions

diff --git a/tools/include/linux/compiler-gcc.h b/tools/include/linux/compiler-gcc.h
index 70fe612..0d35f18 100644
--- a/tools/include/linux/compiler-gcc.h
+++ b/tools/include/linux/compiler-gcc.h
@@ -36,3 +36,7 @@
 #endif
 #define __printf(a, b)	__attribute__((format(printf, a, b)))
 #define __scanf(a, b)	__attribute__((format(scanf, a, b)))
+
+#if GCC_VERSION >= 50100
+#define COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW 1
+#endif
diff --git a/tools/include/linux/overflow.h b/tools/include/linux/overflow.h
new file mode 100644
index 0000000..8712ff7
--- /dev/null
+++ b/tools/include/linux/overflow.h
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+#ifndef __LINUX_OVERFLOW_H
+#define __LINUX_OVERFLOW_H
+
+#include <linux/compiler.h>
+
+/*
+ * In the fallback code below, we need to compute the minimum and
+ * maximum values representable in a given type. These macros may also
+ * be useful elsewhere, so we provide them outside the
+ * COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW block.
+ *
+ * It would seem more obvious to do something like
+ *
+ * #define type_min(T) (T)(is_signed_type(T) ? (T)1 << (8*sizeof(T)-1) : 0)
+ * #define type_max(T) (T)(is_signed_type(T) ? ((T)1 << (8*sizeof(T)-1)) - 1 : ~(T)0)
+ *
+ * Unfortunately, the middle expressions, strictly speaking, have
+ * undefined behaviour, and at least some versions of gcc warn about
+ * the type_max expression (but not if -fsanitize=undefined is in
+ * effect; in that case, the warning is deferred to runtime...).
+ *
+ * The slightly excessive casting in type_min is to make sure the
+ * macros also produce sensible values for the exotic type _Bool. [The
+ * overflow checkers only almost work for _Bool, but that's
+ * a-feature-not-a-bug, since people shouldn't be doing arithmetic on
+ * _Bools. Besides, the gcc builtins don't allow _Bool* as third
+ * argument.]
+ *
+ * Idea stolen from
+ * https://mail-index.netbsd.org/tech-misc/2007/02/05/0000.html -
+ * credit to Christian Biere.
+ */
+#define is_signed_type(type)       (((type)(-1)) < (type)1)
+#define __type_half_max(type) ((type)1 << (8*sizeof(type) - 1 - is_signed_type(type)))
+#define type_max(T) ((T)((__type_half_max(T) - 1) + __type_half_max(T)))
+#define type_min(T) ((T)((T)-type_max(T)-(T)1))
+
+
+#ifdef COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW
+/*
+ * For simplicity and code hygiene, the fallback code below insists on
+ * a, b and *d having the same type (similar to the min() and max()
+ * macros), whereas gcc's type-generic overflow checkers accept
+ * different types. Hence we don't just make check_add_overflow an
+ * alias for __builtin_add_overflow, but add type checks similar to
+ * below.
+ */
+#define check_add_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_add_overflow(__a, __b, __d);	\
+})
+
+#define check_sub_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_sub_overflow(__a, __b, __d);	\
+})
+
+#define check_mul_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	__builtin_mul_overflow(__a, __b, __d);	\
+})
+
+#else
+
+
+/* Checking for unsigned overflow is relatively easy without causing UB. */
+#define __unsigned_add_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = __a + __b;			\
+	*__d < __a;				\
+})
+#define __unsigned_sub_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = __a - __b;			\
+	__a < __b;				\
+})
+/*
+ * If one of a or b is a compile-time constant, this avoids a division.
+ */
+#define __unsigned_mul_overflow(a, b, d) ({		\
+	typeof(a) __a = (a);				\
+	typeof(b) __b = (b);				\
+	typeof(d) __d = (d);				\
+	(void) (&__a == &__b);				\
+	(void) (&__a == __d);				\
+	*__d = __a * __b;				\
+	__builtin_constant_p(__b) ?			\
+	  __b > 0 && __a > type_max(typeof(__a)) / __b : \
+	  __a > 0 && __b > type_max(typeof(__b)) / __a;	 \
+})
+
+/*
+ * For signed types, detecting overflow is much harder, especially if
+ * we want to avoid UB. But the interface of these macros is such that
+ * we must provide a result in *d, and in fact we must produce the
+ * result promised by gcc's builtins, which is simply the possibly
+ * wrapped-around value. Fortunately, we can just formally do the
+ * operations in the widest relevant unsigned type (u64) and then
+ * truncate the result - gcc is smart enough to generate the same code
+ * with and without the (u64) casts.
+ */
+
+/*
+ * Adding two signed integers can overflow only if they have the same
+ * sign, and overflow has happened iff the result has the opposite
+ * sign.
+ */
+#define __signed_add_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = (u64)__a + (u64)__b;		\
+	(((~(__a ^ __b)) & (*__d ^ __a))	\
+		& type_min(typeof(__a))) != 0;	\
+})
+
+/*
+ * Subtraction is similar, except that overflow can now happen only
+ * when the signs are opposite. In this case, overflow has happened if
+ * the result has the opposite sign of a.
+ */
+#define __signed_sub_overflow(a, b, d) ({	\
+	typeof(a) __a = (a);			\
+	typeof(b) __b = (b);			\
+	typeof(d) __d = (d);			\
+	(void) (&__a == &__b);			\
+	(void) (&__a == __d);			\
+	*__d = (u64)__a - (u64)__b;		\
+	((((__a ^ __b)) & (*__d ^ __a))		\
+		& type_min(typeof(__a))) != 0;	\
+})
+
+/*
+ * Signed multiplication is rather hard. gcc always follows C99, so
+ * division is truncated towards 0. This means that we can write the
+ * overflow check like this:
+ *
+ * (a > 0 && (b > MAX/a || b < MIN/a)) ||
+ * (a < -1 && (b > MIN/a || b < MAX/a) ||
+ * (a == -1 && b == MIN)
+ *
+ * The redundant casts of -1 are to silence an annoying -Wtype-limits
+ * (included in -Wextra) warning: When the type is u8 or u16, the
+ * __b_c_e in check_mul_overflow obviously selects
+ * __unsigned_mul_overflow, but unfortunately gcc still parses this
+ * code and warns about the limited range of __b.
+ */
+
+#define __signed_mul_overflow(a, b, d) ({				\
+	typeof(a) __a = (a);						\
+	typeof(b) __b = (b);						\
+	typeof(d) __d = (d);						\
+	typeof(a) __tmax = type_max(typeof(a));				\
+	typeof(a) __tmin = type_min(typeof(a));				\
+	(void) (&__a == &__b);						\
+	(void) (&__a == __d);						\
+	*__d = (u64)__a * (u64)__b;					\
+	(__b > 0   && (__a > __tmax/__b || __a < __tmin/__b)) ||	\
+	(__b < (typeof(__b))-1  && (__a > __tmin/__b || __a < __tmax/__b)) || \
+	(__b == (typeof(__b))-1 && __a == __tmin);			\
+})
+
+
+#define check_add_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_add_overflow(a, b, d),			\
+			__unsigned_add_overflow(a, b, d))
+
+#define check_sub_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_sub_overflow(a, b, d),			\
+			__unsigned_sub_overflow(a, b, d))
+
+#define check_mul_overflow(a, b, d)					\
+	__builtin_choose_expr(is_signed_type(typeof(a)),		\
+			__signed_mul_overflow(a, b, d),			\
+			__unsigned_mul_overflow(a, b, d))
+
+
+#endif /* COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW */
+
+/**
+ * array_size() - Calculate size of 2-dimensional array.
+ *
+ * @a: dimension one
+ * @b: dimension two
+ *
+ * Calculates size of 2-dimensional array: @a * @b.
+ *
+ * Returns: number of bytes needed to represent the array or SIZE_MAX on
+ * overflow.
+ */
+static inline __must_check size_t array_size(size_t a, size_t b)
+{
+	size_t bytes;
+
+	if (check_mul_overflow(a, b, &bytes))
+		return SIZE_MAX;
+
+	return bytes;
+}
+
+/**
+ * array3_size() - Calculate size of 3-dimensional array.
+ *
+ * @a: dimension one
+ * @b: dimension two
+ * @c: dimension three
+ *
+ * Calculates size of 3-dimensional array: @a * @b * @c.
+ *
+ * Returns: number of bytes needed to represent the array or SIZE_MAX on
+ * overflow.
+ */
+static inline __must_check size_t array3_size(size_t a, size_t b, size_t c)
+{
+	size_t bytes;
+
+	if (check_mul_overflow(a, b, &bytes))
+		return SIZE_MAX;
+	if (check_mul_overflow(bytes, c, &bytes))
+		return SIZE_MAX;
+
+	return bytes;
+}
+
+static inline __must_check size_t __ab_c_size(size_t n, size_t size, size_t c)
+{
+	size_t bytes;
+
+	if (check_mul_overflow(n, size, &bytes))
+		return SIZE_MAX;
+	if (check_add_overflow(bytes, c, &bytes))
+		return SIZE_MAX;
+
+	return bytes;
+}
+
+/**
+ * struct_size() - Calculate size of structure with trailing array.
+ * @p: Pointer to the structure.
+ * @member: Name of the array member.
+ * @n: Number of elements in the array.
+ *
+ * Calculates size of memory needed for structure @p followed by an
+ * array of @n @member elements.
+ *
+ * Return: number of bytes needed or SIZE_MAX on overflow.
+ */
+#define struct_size(p, member, n)					\
+	__ab_c_size(n,							\
+		    sizeof(*(p)->member) + __must_be_array((p)->member),\
+		    sizeof(*(p)))
+
+#endif /* __LINUX_OVERFLOW_H */
diff --git a/tools/include/tools/libc_compat.h b/tools/include/tools/libc_compat.h
new file mode 100644
index 0000000..664ced8
--- /dev/null
+++ b/tools/include/tools/libc_compat.h
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2018 Netronome Systems, Inc. */
+
+#ifndef __TOOLS_LIBC_COMPAT_H
+#define __TOOLS_LIBC_COMPAT_H
+
+#include <stdlib.h>
+#include <linux/overflow.h>
+
+#ifdef COMPAT_NEED_REALLOCARRAY
+static inline void *reallocarray(void *ptr, size_t nmemb, size_t size)
+{
+	size_t bytes;
+
+	if (unlikely(check_mul_overflow(nmemb, size, &bytes)))
+		return NULL;
+	return realloc(ptr, bytes);
+}
+#endif
+#endif
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index b7db326..66917a4 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -75,6 +75,11 @@ struct bpf_lpm_trie_key {
 	__u8	data[0];	/* Arbitrary size */
 };
 
+struct bpf_cgroup_storage_key {
+	__u64	cgroup_inode_id;	/* cgroup inode id */
+	__u32	attach_type;		/* program attach type */
+};
+
 /* BPF syscall commands, see bpf(2) man-page for details. */
 enum bpf_cmd {
 	BPF_MAP_CREATE,
@@ -120,6 +125,8 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_CPUMAP,
 	BPF_MAP_TYPE_XSKMAP,
 	BPF_MAP_TYPE_SOCKHASH,
+	BPF_MAP_TYPE_CGROUP_STORAGE,
+	BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
 };
 
 enum bpf_prog_type {
@@ -144,6 +151,7 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_CGROUP_SOCK_ADDR,
 	BPF_PROG_TYPE_LWT_SEG6LOCAL,
 	BPF_PROG_TYPE_LIRC_MODE2,
+	BPF_PROG_TYPE_SK_REUSEPORT,
 };
 
 enum bpf_attach_type {
@@ -1371,6 +1379,20 @@ union bpf_attr {
  * 		A 8-byte long non-decreasing number on success, or 0 if the
  * 		socket field is missing inside *skb*.
  *
+ * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx)
+ * 	Description
+ * 		Equivalent to bpf_get_socket_cookie() helper that accepts
+ * 		*skb*, but gets socket from **struct bpf_sock_addr** contex.
+ * 	Return
+ * 		A 8-byte long non-decreasing number.
+ *
+ * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx)
+ * 	Description
+ * 		Equivalent to bpf_get_socket_cookie() helper that accepts
+ * 		*skb*, but gets socket from **struct bpf_sock_ops** contex.
+ * 	Return
+ * 		A 8-byte long non-decreasing number.
+ *
  * u32 bpf_get_socket_uid(struct sk_buff *skb)
  * 	Return
  * 		The owner UID of the socket associated to *skb*. If the socket
@@ -1826,7 +1848,7 @@ union bpf_attr {
  * 		A non-negative value equal to or less than *size* on success,
  * 		or a negative error in case of failure.
  *
- * int skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
+ * int bpf_skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
  * 	Description
  * 		This helper is similar to **bpf_skb_load_bytes**\ () in that
  * 		it provides an easy way to load *len* bytes from *offset*
@@ -1877,7 +1899,7 @@ union bpf_attr {
  *		* < 0 if any input argument is invalid
  *		*   0 on success (packet is forwarded, nexthop neighbor exists)
  *		* > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
- *		*     packet is not forwarded or needs assist from full stack
+ *		  packet is not forwarded or needs assist from full stack
  *
  * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
  *	Description
@@ -2033,7 +2055,6 @@ union bpf_attr {
  *		This helper is only available is the kernel was compiled with
  *		the **CONFIG_BPF_LIRC_MODE2** configuration option set to
  *		"**y**".
- *
  *	Return
  *		0
  *
@@ -2053,7 +2074,6 @@ union bpf_attr {
  *		This helper is only available is the kernel was compiled with
  *		the **CONFIG_BPF_LIRC_MODE2** configuration option set to
  *		"**y**".
- *
  *	Return
  *		0
  *
@@ -2073,10 +2093,54 @@ union bpf_attr {
  * 	Return
  * 		The id is returned or 0 in case the id could not be retrieved.
  *
+ * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level)
+ *	Description
+ *		Return id of cgroup v2 that is ancestor of cgroup associated
+ *		with the *skb* at the *ancestor_level*.  The root cgroup is at
+ *		*ancestor_level* zero and each step down the hierarchy
+ *		increments the level. If *ancestor_level* == level of cgroup
+ *		associated with *skb*, then return value will be same as that
+ *		of **bpf_skb_cgroup_id**\ ().
+ *
+ *		The helper is useful to implement policies based on cgroups
+ *		that are upper in hierarchy than immediate cgroup associated
+ *		with *skb*.
+ *
+ *		The format of returned id and helper limitations are same as in
+ *		**bpf_skb_cgroup_id**\ ().
+ *	Return
+ *		The id is returned or 0 in case the id could not be retrieved.
+ *
  * u64 bpf_get_current_cgroup_id(void)
  * 	Return
  * 		A 64-bit integer containing the current cgroup id based
  * 		on the cgroup within which the current task is running.
+ *
+ * void* get_local_storage(void *map, u64 flags)
+ *	Description
+ *		Get the pointer to the local storage area.
+ *		The type and the size of the local storage is defined
+ *		by the *map* argument.
+ *		The *flags* meaning is specific for each map type,
+ *		and has to be 0 for cgroup local storage.
+ *
+ *		Depending on the bpf program type, a local storage area
+ *		can be shared between multiple instances of the bpf program,
+ *		running simultaneously.
+ *
+ *		A user should care about the synchronization by himself.
+ *		For example, by using the BPF_STX_XADD instruction to alter
+ *		the shared data.
+ *	Return
+ *		Pointer to the local storage area.
+ *
+ * int bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags)
+ *	Description
+ *		Select a SO_REUSEPORT sk from a	BPF_MAP_TYPE_REUSEPORT_ARRAY map
+ *		It checks the selected sk is matching the incoming
+ *		request in the skb.
+ *	Return
+ *		0 on success, or a negative error in case of failure.
  */
 #define __BPF_FUNC_MAPPER(FN)		\
 	FN(unspec),			\
@@ -2159,7 +2223,10 @@ union bpf_attr {
 	FN(rc_repeat),			\
 	FN(rc_keydown),			\
 	FN(skb_cgroup_id),		\
-	FN(get_current_cgroup_id),
+	FN(get_current_cgroup_id),	\
+	FN(get_local_storage),		\
+	FN(sk_select_reuseport),	\
+	FN(skb_ancestor_cgroup_id),
 
 /* integer value in 'imm' field of BPF_CALL instruction selects which helper
  * function eBPF program intends to call
@@ -2376,6 +2443,30 @@ struct sk_msg_md {
 	__u32 local_port;	/* stored in host byte order */
 };
 
+struct sk_reuseport_md {
+	/*
+	 * Start of directly accessible data. It begins from
+	 * the tcp/udp header.
+	 */
+	void *data;
+	void *data_end;		/* End of directly accessible data */
+	/*
+	 * Total length of packet (starting from the tcp/udp header).
+	 * Note that the directly accessible bytes (data_end - data)
+	 * could be less than this "len".  Those bytes could be
+	 * indirectly read by a helper "bpf_skb_load_bytes()".
+	 */
+	__u32 len;
+	/*
+	 * Eth protocol in the mac header (network byte order). e.g.
+	 * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD)
+	 */
+	__u32 eth_protocol;
+	__u32 ip_protocol;	/* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */
+	__u32 bind_inany;	/* Is sock bound to an INANY address? */
+	__u32 hash;		/* A hash of the packet 4 tuples */
+};
+
 #define BPF_TAG_SIZE	8
 
 struct bpf_prog_info {
@@ -2557,6 +2648,9 @@ enum {
 					 * Arg1: old_state
 					 * Arg2: new_state
 					 */
+	BPF_SOCK_OPS_TCP_LISTEN_CB,	/* Called on listen(2), right after
+					 * socket transition to LISTEN state.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect