tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

10 files changed, 14 insertions, 14 deletions

diff --git a/sound/core/init.c b/sound/core/init.c
index 57b792e2..3e65da2 100644
--- a/sound/core/init.c
+++ b/sound/core/init.c
@@ -642,7 +642,7 @@ static struct device_attribute card_number_attrs =
  *  external accesses.  Thus, you should call this function at the end
  *  of the initialization of the card.
  *
- *  Returns zero otherwise a negative error code if the registrain failed.
+ *  Returns zero otherwise a negative error code if the registration failed.
  */
 int snd_card_register(struct snd_card *card)
 {
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 8bc7cb3..8e022fc 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -985,7 +985,7 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push)
 	if (push)
 		snd_pcm_update_hw_ptr(substream);
 	/* The jiffies check in snd_pcm_update_hw_ptr*() is done by
-	 * a delta betwen the current jiffies, this gives a large enough
+	 * a delta between the current jiffies, this gives a large enough
 	 * delta, effectively to skip the check once.
 	 */
 	substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 265abcc..9b915e2 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -264,7 +264,7 @@ static int __devinit snd_opl3sa2_detect(struct snd_card *card)
 		snd_printd("OPL3-SA [0x%lx] detect (1) = 0x%x (0x%x)\n", port, tmp, tmp1);
 		return -ENODEV;
 	}
-	/* try if the MIC register is accesible */
+	/* try if the MIC register is accessible */
 	tmp = snd_opl3sa2_read(chip, OPL3SA2_MIC);
 	snd_opl3sa2_write(chip, OPL3SA2_MIC, 0x8a);
 	if (((tmp1 = snd_opl3sa2_read(chip, OPL3SA2_MIC)) & 0x9f) != 0x8a) {
diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index f19c110..fc53b9b 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -188,7 +188,7 @@
 #define PLAYBACK_LIST_PTR	0x02		/* Pointer to the current period being played */
 						/* PTR[5:0], Default: 0x0 */
 #define PLAYBACK_UNKNOWN3	0x03		/* Not used ?? */
-#define PLAYBACK_DMA_ADDR	0x04		/* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR	0x04		/* Playback DMA address */
 						/* DMA[31:0], Default: 0x0 */
 #define PLAYBACK_PERIOD_SIZE	0x05		/* Playback period size. win2000 uses 0x04000000 */
 						/* SIZE[31:16], Default: 0x0 */
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index df47f73..0c701e4 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -114,7 +114,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
 						 */
 #define PLAYBACK_LIST_SIZE	0x01		/* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000  */
 #define PLAYBACK_LIST_PTR	0x02		/* Pointer to the current period being played */
-#define PLAYBACK_DMA_ADDR	0x04		/* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR	0x04		/* Playback DMA address */
 #define PLAYBACK_PERIOD_SIZE	0x05		/* Playback period size */
 #define PLAYBACK_POINTER	0x06		/* Playback period pointer. Sample currently in DAC */
 #define PLAYBACK_UNKNOWN1       0x07
diff --git a/sound/pci/emu10k1/p16v.h b/sound/pci/emu10k1/p16v.h
index 15321494..00f4817 100644
--- a/sound/pci/emu10k1/p16v.h
+++ b/sound/pci/emu10k1/p16v.h
@@ -96,7 +96,7 @@
 #define PLAYBACK_LIST_SIZE	0x01		/* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000  */
 #define PLAYBACK_LIST_PTR	0x02		/* Pointer to the current period being played */
 #define PLAYBACK_UNKNOWN3	0x03		/* Not used */
-#define PLAYBACK_DMA_ADDR	0x04		/* Playback DMA addresss */
+#define PLAYBACK_DMA_ADDR	0x04		/* Playback DMA address */
 #define PLAYBACK_PERIOD_SIZE	0x05		/* Playback period size. win2000 uses 0x04000000 */
 #define PLAYBACK_POINTER	0x06		/* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */
 #define PLAYBACK_FIFO_END_ADDRESS	0x07		/* Playback FIFO end address */
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 23a58f0..7c17f45 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -220,7 +220,7 @@ MODULE_PARM_DESC(joystick, "Enable joystick.");
 #define	RINGB_EN_2CODEC		0x0020
 #define RINGB_SING_BIT_DUAL	0x0040
 
-/* ****Port Adresses**** */
+/* ****Port Addresses**** */
 
 /*   Write & Read */
 #define ESM_INDEX		0x02
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 0c98ef9..f5eadfc 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -487,7 +487,7 @@ struct hdspm {
 	struct snd_kcontrol *playback_mixer_ctls[HDSPM_MAX_CHANNELS];
 	/* but input to much, so not used */
 	struct snd_kcontrol *input_mixer_ctls[HDSPM_MAX_CHANNELS];
-	/* full mixer accessable over mixer ioctl or hwdep-device */
+	/* full mixer accessible over mixer ioctl or hwdep-device */
 	struct hdspm_mixer *mixer;
 
 };
@@ -550,7 +550,7 @@ static inline int HDSPM_bit2freq(int n)
 	return bit2freq_tab[n];
 }
 
-/* Write/read to/from HDSPM with Adresses in Bytes
+/* Write/read to/from HDSPM with Addresses in Bytes
    not words but only 32Bit writes are allowed */
 
 static inline void hdspm_write(struct hdspm * hdspm, unsigned int reg,
@@ -2908,7 +2908,7 @@ static int snd_hdspm_create_controls(struct snd_card *card, struct hdspm * hdspm
 
 	/* Channel playback mixer as default control 
 	   Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders,
-	   thats too * big for any alsamixer they are accesible via special
+	   thats too * big for any alsamixer they are accessible via special
 	   IOCTL on hwdep and the mixer 2dimensional mixer control
 	*/
 
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index bc22ee9..43316a7 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -1953,7 +1953,7 @@ static int max98088_probe(struct snd_soc_codec *codec)
                return ret;
        }
 
-       /* initalize private data */
+       /* initialize private data */
 
        max98088->sysclk = (unsigned)-1;
        max98088->eq_textcnt = 0;
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
index f31d22a..11c88b1 100644
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ b/sound/soc/s3c24xx/smdk_spdif.c
@@ -61,7 +61,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev)
 		goto out3;
 	}
 
-	/* Set audio clock heirachy for S/PDIF */
+	/* Set audio clock hierarchy for S/PDIF */
 	clk_set_parent(mout_epll, fout_epll);
 	clk_set_parent(sclk_audio0, mout_epll);
 	clk_set_parent(sclk_spdif, sclk_audio0);
@@ -79,7 +79,7 @@ out1:
 
 /* We should haved to set clock directly on this part because of clock
  * scheme of Samsudng SoCs did not support to set rates from abstrct
- * clock of it's heirachy.
+ * clock of it's hierarchy.
  */
 static int set_audio_clock_rate(unsigned long epll_rate,
 				unsigned long audio_rate)
@@ -197,7 +197,7 @@ static int __init smdk_init(void)
 	if (ret)
 		goto err1;
 
-	/* Set audio clock heirachy manually */
+	/* Set audio clock hierarchy manually */
 	ret = set_audio_clock_heirachy(smdk_snd_spdif_device);
 	if (ret)
 		goto err1;