Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This update contains overall only driver-specific fixes.  Slightly
  large LOC are seen in usb-audio driver for a couple of new device
  quirks and cs42l71 ASoC driver for enhanced features.  The others are
  a few small (regression) fixes HD-audio, and yet other small / trival
  ASoC fixes."

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Support for Digidesign Mbox 2 USB sound card:
  ALSA: HDA: Fix sound resume hang
  ALSA: hda - bug fix for invalid connection list of Haswell HDMI codec pins
  ALSA: hda - Fix the wrong pincaps set in ALC861VD dallas/hp fixup
  ALSA: hda - Set codec->single_adc_amp flag for Realtek codecs
  ASoC: atmel-ssc: change disable to disable in dts node
  ASoC: Prevent pop_wait overwrite
  ALSA: usb-audio: ignore-quirk for HP Wireless Audio
  ALSA: hda - Always turn on pins for HDMI/DP
  ALSA: hda - Fix pin configuration of HP Pavilion dv7
  ASoC: core: Fix splitting of log messages
  ASoC: cs42l73: Change VSPIN/VSPOUT to VSPINOUT
  ASoC: cs42l73: Add DAPM events for power down.
  ASoC: cs42l73: Add DMIC's as DAPM inputs.
  ASoC: sigmadsp: Fix endianness conversion issue
  ASoC: tpa6130a2: Use devm_* APIs

1 files changed, 91 insertions, 0 deletions

diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 007fcec..f104c68 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -306,6 +306,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
 		[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
 		[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
 		[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
+		[QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
 		[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
 		[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
 		[QUIRK_MIDI_CME] = create_any_midi_quirk,
@@ -497,6 +498,92 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
 	return -EAGAIN;
 }
 
+static void mbox2_setup_48_24_magic(struct usb_device *dev)
+{
+	u8 srate[3];
+	u8 temp[12];
+
+	/* Choose 48000Hz permanently */
+	srate[0] = 0x80;
+	srate[1] = 0xbb;
+	srate[2] = 0x00;
+
+	/* Send the magic! */
+	snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+		0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+		0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
+	return;
+}
+
+/* Digidesign Mbox 2 needs to load firmware onboard
+ * and driver must wait a few seconds for initialisation.
+ */
+
+#define MBOX2_FIRMWARE_SIZE    646
+#define MBOX2_BOOT_LOADING     0x01 /* Hard coded into the device */
+#define MBOX2_BOOT_READY       0x02 /* Hard coded into the device */
+
+int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
+{
+	struct usb_host_config *config = dev->actconfig;
+	int err;
+	u8 bootresponse;
+	int fwsize;
+	int count;
+
+	fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+	if (fwsize != MBOX2_FIRMWARE_SIZE) {
+		snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
+		return -ENODEV;
+	}
+
+	snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
+
+	count = 0;
+	bootresponse = MBOX2_BOOT_LOADING;
+	while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
+		msleep(500); /* 0.5 second delay */
+		snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+			/* Control magic - load onboard firmware */
+			0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
+		if (bootresponse == MBOX2_BOOT_READY)
+			break;
+		snd_printd("usb-audio: device not ready, resending boot sequence...\n");
+		count++;
+	}
+
+	if (bootresponse != MBOX2_BOOT_READY) {
+		snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
+		return -ENODEV;
+	}
+
+	snd_printdd("usb-audio: device initialised!\n");
+
+	err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+		&dev->descriptor, sizeof(dev->descriptor));
+	config = dev->actconfig;
+	if (err < 0)
+		snd_printd("error usb_get_descriptor: %d\n", err);
+
+	err = usb_reset_configuration(dev);
+	if (err < 0)
+		snd_printd("error usb_reset_configuration: %d\n", err);
+	snd_printdd("mbox2_boot: new boot length = %d\n",
+		le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+	mbox2_setup_48_24_magic(dev);
+
+	snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
+
+	return 0; /* Successful boot */
+}
+
 /*
  * Setup quirks
  */
@@ -655,6 +742,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
 		return snd_usb_cm6206_boot_quirk(dev);
 
+	case USB_ID(0x0dba, 0x3000):
+		/* Digidesign Mbox 2 */
+		return snd_usb_mbox2_boot_quirk(dev);
+
 	case USB_ID(0x133e, 0x0815):
 		/* Access Music VirusTI Desktop */
 		return snd_usb_accessmusic_boot_quirk(dev);