summaryrefslogtreecommitdiffstats
path: root/sound/usb/clock.c
diff options
context:
space:
mode:
authorClemens Ladisch <clemens@ladisch.de>2011-09-26 21:15:27 +0200
committerTakashi Iwai <tiwai@suse.de>2011-09-27 09:21:48 +0200
commit17d900c4a1b50bc191b3ca58cbd78acc04a1c5b3 (patch)
tree7640521988e285f1afa0e3dd44aa73a5333ccb38 /sound/usb/clock.c
parent6b69a0e520a0dc6579901098d0810bcd2e1ea60b (diff)
downloadop-kernel-dev-17d900c4a1b50bc191b3ca58cbd78acc04a1c5b3.zip
op-kernel-dev-17d900c4a1b50bc191b3ca58cbd78acc04a1c5b3.tar.gz
ALSA: usb-audio: increase control transfer timeout
There are certain devices that are reportedly so slow that they need more than 100 ms to handle control transfers. Therefore, increase the timeout in mixer(_quirks).c to 1000 ms. The timeout parameter of snd_usb_ctl_msg() is now constant, so we can drop it. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/usb/clock.c')
-rw-r--r--sound/usb/clock.c12
1 files changed, 6 insertions, 6 deletions
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 075195e..379baad 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -91,7 +91,7 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i
USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
UAC2_CX_CLOCK_SELECTOR << 8,
snd_usb_ctrl_intf(chip) | (selector_id << 8),
- &buf, sizeof(buf), 1000);
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
@@ -118,7 +118,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, int source_id)
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_CLOCK_VALID << 8,
snd_usb_ctrl_intf(chip) | (source_id << 8),
- &data, sizeof(data), 1000);
+ &data, sizeof(data));
if (err < 0) {
snd_printk(KERN_WARNING "%s(): cannot get clock validity for id %d\n",
@@ -222,7 +222,7 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d to ep %#x\n",
dev->devnum, iface, fmt->altsetting, rate, ep);
return err;
@@ -231,7 +231,7 @@ static int set_sample_rate_v1(struct snd_usb_audio *chip, int iface,
if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN,
UAC_EP_CS_ATTR_SAMPLE_RATE << 8, ep,
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq at ep %#x\n",
dev->devnum, iface, fmt->altsetting, ep);
return 0; /* some devices don't support reading */
@@ -273,7 +273,7 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_ERR "%d:%d:%d: cannot set freq %d (v2)\n",
dev->devnum, iface, fmt->altsetting, rate);
return err;
@@ -283,7 +283,7 @@ static int set_sample_rate_v2(struct snd_usb_audio *chip, int iface,
USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
UAC2_CS_CONTROL_SAM_FREQ << 8,
snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data), 1000)) < 0) {
+ data, sizeof(data))) < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
return err;
OpenPOWER on IntegriCloud