summaryrefslogtreecommitdiffstats
path: root/sound/soc
diff options
context:
space:
mode:
authorEric Millbrandt <emillbrandt@dekaresearch.com>2010-08-06 20:49:19 -0600
committerGrant Likely <grant.likely@secretlab.ca>2010-08-06 20:49:19 -0600
commit949ad0a783729ad8c2e8e5bcbbad5d05a60de616 (patch)
tree8fe9937ab4df880e276be4b6eb64c627b54deb0e /sound/soc
parentcfa6a88c83f639f17b96a34dc0bf93faf432e73a (diff)
downloadop-kernel-dev-949ad0a783729ad8c2e8e5bcbbad5d05a60de616.zip
op-kernel-dev-949ad0a783729ad8c2e8e5bcbbad5d05a60de616.tar.gz
sound/soc: mpc5200_psc_ac97: Use gpio pins for cold reset
Call the gpio reset platform function instead of using the flawed ac97 functionality of the MPC5200(b) From MPC5200B User's Manual: "Some AC97 devices goes to a test mode, if the Sync line is high during the Res line is low (reset phase). To avoid this behavior the Sync line must be also forced to zero during the reset phase. To do that, the pin muxing should switch to GPIO mode and the GPIO control register should be used to control the output lines." Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'sound/soc')
-rw-r--r--sound/soc/fsl/mpc5200_psc_ac97.c22
1 files changed, 18 insertions, 4 deletions
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index e2ee220..e7f5d50 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -20,6 +20,7 @@
#include <asm/time.h>
#include <asm/delay.h>
+#include <asm/mpc52xx.h>
#include <asm/mpc52xx_psc.h>
#include "mpc5200_dma.h"
@@ -100,19 +101,32 @@ static void psc_ac97_warm_reset(struct snd_ac97 *ac97)
{
struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
+ mutex_lock(&psc_dma->mutex);
+
out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_AWR);
udelay(3);
out_be32(&regs->sicr, psc_dma->sicr);
+
+ mutex_unlock(&psc_dma->mutex);
}
static void psc_ac97_cold_reset(struct snd_ac97 *ac97)
{
struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
- /* Do a cold reset */
- out_8(&regs->op1, MPC52xx_PSC_OP_RES);
- udelay(10);
- out_8(&regs->op0, MPC52xx_PSC_OP_RES);
+ mutex_lock(&psc_dma->mutex);
+ dev_dbg(psc_dma->dev, "cold reset\n");
+
+ mpc5200_psc_ac97_gpio_reset(psc_dma->id);
+
+ /* Notify the PSC that a reset has occurred */
+ out_be32(&regs->sicr, psc_dma->sicr | MPC52xx_PSC_SICR_ACRB);
+
+ /* Re-enable RX and TX */
+ out_8(&regs->command, MPC52xx_PSC_TX_ENABLE | MPC52xx_PSC_RX_ENABLE);
+
+ mutex_unlock(&psc_dma->mutex);
+
msleep(1);
psc_ac97_warm_reset(ac97);
}
OpenPOWER on IntegriCloud