summaryrefslogtreecommitdiffstats
path: root/sound/soc/tegra
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2011-02-10 15:37:18 -0700
committerMark Brown <broonie@opensource.wolfsonmicro.com>2011-02-13 19:50:10 +0000
commitbf1b1328360d53a41cdf3f8639a5f38cb9537f1c (patch)
tree863c66c43c6b26dc72cb84be59b37716b837f33a /sound/soc/tegra
parent0d6cdca7199fbc93a8f29369f2b1e750d346ac8f (diff)
downloadop-kernel-dev-bf1b1328360d53a41cdf3f8639a5f38cb9537f1c.zip
op-kernel-dev-bf1b1328360d53a41cdf3f8639a5f38cb9537f1c.tar.gz
ASoC: Tegra: Harmony: Explicitly set mic enables
Harmony has both an external mic (a regular mic jack) and an internal mic (a 0.1" two-pin header on the board). The external mic is connected to the WM8903's IN1L pin, and is supported by the current driver. The internal mic is connected to the WM8903's IN1R pin, and is not supported by the current driver. It appears that no Harmony systems were shipped with any internal mic connected; users were expected to provide their own. This makes the internal mic connection less interesting. The WM8903's Mic Bias signal is used for both of these mics. For each mic, a GPIO drives a transistor which gates whether the mic bias signal is actively connected to that mic, or isolated from it. The dual use of the mic bias for both mics makes a general-purpose complete implementation of mic detection using the mic bias complex. So, for simplicity, the internal mic is currently ignored by the driver. This patch configures the relevant GPIOs to enable the mic bias connection to the external mic, and disable the mic bias connection to the internal mic. Note that in practice, this is the default state if these GPIOs aren't configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'sound/soc/tegra')
-rw-r--r--sound/soc/tegra/harmony.c34
1 files changed, 31 insertions, 3 deletions
diff --git a/sound/soc/tegra/harmony.c b/sound/soc/tegra/harmony.c
index cd5d90a..6651242 100644
--- a/sound/soc/tegra/harmony.c
+++ b/sound/soc/tegra/harmony.c
@@ -52,10 +52,14 @@
#define DRV_NAME "tegra-snd-harmony"
+#define GPIO_SPKR_EN BIT(0)
+#define GPIO_INT_MIC_EN BIT(1)
+#define GPIO_EXT_MIC_EN BIT(2)
+
struct tegra_harmony {
struct tegra_asoc_utils_data util_data;
struct harmony_audio_platform_data *pdata;
- int gpio_spkr_en_requested;
+ int gpio_requested;
};
static int harmony_asoc_hw_params(struct snd_pcm_substream *substream,
@@ -202,10 +206,30 @@ static int harmony_asoc_init(struct snd_soc_pcm_runtime *rtd)
dev_err(card->dev, "cannot get spkr_en gpio\n");
return ret;
}
- harmony->gpio_spkr_en_requested = 1;
+ harmony->gpio_requested |= GPIO_SPKR_EN;
gpio_direction_output(pdata->gpio_spkr_en, 0);
+ ret = gpio_request(pdata->gpio_int_mic_en, "int_mic_en");
+ if (ret) {
+ dev_err(card->dev, "cannot get int_mic_en gpio\n");
+ return ret;
+ }
+ harmony->gpio_requested |= GPIO_INT_MIC_EN;
+
+ /* Disable int mic; enable signal is active-high */
+ gpio_direction_output(pdata->gpio_int_mic_en, 0);
+
+ ret = gpio_request(pdata->gpio_ext_mic_en, "ext_mic_en");
+ if (ret) {
+ dev_err(card->dev, "cannot get ext_mic_en gpio\n");
+ return ret;
+ }
+ harmony->gpio_requested |= GPIO_EXT_MIC_EN;
+
+ /* Enable ext mic; enable signal is active-low */
+ gpio_direction_output(pdata->gpio_ext_mic_en, 0);
+
ret = snd_soc_add_controls(codec, harmony_controls,
ARRAY_SIZE(harmony_controls));
if (ret < 0)
@@ -330,7 +354,11 @@ static int __devexit tegra_snd_harmony_remove(struct platform_device *pdev)
tegra_asoc_utils_fini(&harmony->util_data);
- if (harmony->gpio_spkr_en_requested)
+ if (harmony->gpio_requested & GPIO_EXT_MIC_EN)
+ gpio_free(pdata->gpio_ext_mic_en);
+ if (harmony->gpio_requested & GPIO_INT_MIC_EN)
+ gpio_free(pdata->gpio_int_mic_en);
+ if (harmony->gpio_requested & GPIO_SPKR_EN)
gpio_free(pdata->gpio_spkr_en);
kfree(harmony);
OpenPOWER on IntegriCloud