ASoC: imx: move audmux driver into sound/soc/imx

As audmux becomes a platform driver and its callers are all ASoC
machine drivers, there is no reason to keep it in arch folder, so
move it to sound/soc/imx.

One bonus point would be those ASoC machine drivers stop including
mach/audmux.h, since it's been moved to sound/soc/imx/imx-audmux.h.
This should be a move to the right direction in terms of single kernel
image goal.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

8 files changed, 374 insertions, 5 deletions

diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig
index aa4294b..d3b7166 100644
--- a/sound/soc/imx/Kconfig
+++ b/sound/soc/imx/Kconfig
@@ -16,11 +16,15 @@ config SND_MXC_SOC_MX2
 	select SND_SOC_DMAENGINE_PCM
 	tristate
 
+config SND_SOC_IMX_AUDMUX
+	tristate
+
 config SND_MXC_SOC_WM1133_EV1
 	tristate "Audio on the the i.MX31ADS with WM1133-EV1 fitted"
 	depends on MACH_MX31ADS_WM1133_EV1 && EXPERIMENTAL
 	select SND_SOC_WM8350
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
 	help
 	  Enable support for audio on the i.MX31ADS with the WM1133-EV1
 	  PMIC board with WM8835x fitted.
@@ -30,6 +34,7 @@ config SND_SOC_MX27VIS_AIC32X4
 	depends on MACH_IMX27_VISSTRIM_M10 && I2C
 	select SND_SOC_TLV320AIC32X4
 	select SND_MXC_SOC_MX2
+	select SND_SOC_IMX_AUDMUX
 	help
 	  Say Y if you want to add support for SoC audio on Visstrim SM10
 	  board with TLV320AIC32X4 codec.
@@ -40,6 +45,7 @@ config SND_SOC_PHYCORE_AC97
 	select SND_SOC_AC97_BUS
 	select SND_SOC_WM9712
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
 	help
 	  Say Y if you want to add support for SoC audio on Phytec phyCORE
 	  and phyCARD boards in AC97 mode
@@ -53,6 +59,7 @@ config SND_SOC_EUKREA_TLV320
 	depends on I2C
 	select SND_SOC_TLV320AIC23
 	select SND_MXC_SOC_FIQ
+	select SND_SOC_IMX_AUDMUX
 	help
 	  Enable I2S based access to the TLV320AIC23B codec attached
 	  to the SSI interface
diff --git a/sound/soc/imx/Makefile b/sound/soc/imx/Makefile
index d6d609b..5c40541 100644
--- a/sound/soc/imx/Makefile
+++ b/sound/soc/imx/Makefile
@@ -2,10 +2,12 @@
 snd-soc-imx-objs := imx-ssi.o
 snd-soc-imx-fiq-objs := imx-pcm-fiq.o
 snd-soc-imx-mx2-objs := imx-pcm-dma-mx2.o
+snd-soc-imx-audmux-objs := imx-audmux.o
 
 obj-$(CONFIG_SND_IMX_SOC) += snd-soc-imx.o
 obj-$(CONFIG_SND_MXC_SOC_FIQ) += snd-soc-imx-fiq.o
 obj-$(CONFIG_SND_MXC_SOC_MX2) += snd-soc-imx-mx2.o
+obj-$(CONFIG_SND_SOC_IMX_AUDMUX) += snd-soc-imx-audmux.o
 
 # i.MX Machine Support
 snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index bfcb6d9..b375ed4 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -23,10 +23,10 @@
 #include <sound/pcm.h>
 #include <sound/soc.h>
 #include <asm/mach-types.h>
-#include <mach/audmux.h>
 
 #include "../codecs/tlv320aic23.h"
 #include "imx-ssi.h"
+#include "imx-audmux.h"
 
 #define CODEC_CLOCK 12000000
 
diff --git a/sound/soc/imx/imx-audmux.c b/sound/soc/imx/imx-audmux.c
new file mode 100644
index 0000000..7b16266
--- /dev/null
+++ b/sound/soc/imx/imx-audmux.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "imx-audmux.h"
+
+#define DRIVER_NAME "imx-audmux"
+
+static struct clk *audmux_clk;
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
+#define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+	switch (port) {
+	case MX31_AUDMUX_PORT1_SSI0:
+		return "imx-ssi.0";
+	case MX31_AUDMUX_PORT2_SSI1:
+		return "imx-ssi.1";
+	case MX31_AUDMUX_PORT3_SSI_PINS_3:
+		return "SSI3";
+	case MX31_AUDMUX_PORT4_SSI_PINS_4:
+		return "SSI4";
+	case MX31_AUDMUX_PORT5_SSI_PINS_5:
+		return "SSI5";
+	case MX31_AUDMUX_PORT6_SSI_PINS_6:
+		return "SSI6";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	int port = (int)file->private_data;
+	u32 pdcr, ptcr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+		       pdcr, ptcr);
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS output from %s, ",
+				audmux_port_string((ptcr >> 27) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS input, ");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk output from %s",
+				audmux_port_string((ptcr >> 22) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk input");
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"Port is symmetric");
+	} else {
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS output from %s, ",
+					audmux_port_string((ptcr >> 17) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS input, ");
+
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk output from %s",
+					audmux_port_string((ptcr >> 12) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk input");
+	}
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret,
+			"\nData received from %s\n",
+			audmux_port_string((pdcr >> 13) & 0x7));
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+	.open = audmux_open_file,
+	.read = audmux_read_file,
+	.llseek = default_llseek,
+};
+
+static void __init audmux_debugfs_init(void)
+{
+	int i;
+	char buf[20];
+
+	audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+	if (!audmux_debugfs_root) {
+		pr_warning("Failed to create AUDMUX debugfs root\n");
+		return;
+	}
+
+	for (i = 1; i < 8; i++) {
+		snprintf(buf, sizeof(buf), "ssi%d", i);
+		if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+					 (void *)i, &audmux_debugfs_fops))
+			pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+				   i);
+	}
+}
+
+static void __exit audmux_debugfs_remove(void)
+{
+	debugfs_remove_recursive(audmux_debugfs_root);
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+
+static inline void audmux_debugfs_remove(void)
+{
+}
+#endif
+
+enum imx_audmux_type {
+	IMX21_AUDMUX,
+	IMX31_AUDMUX,
+} audmux_type;
+
+static struct platform_device_id imx_audmux_ids[] = {
+	{
+		.name = "imx21-audmux",
+		.driver_data = IMX21_AUDMUX,
+	}, {
+		.name = "imx31-audmux",
+		.driver_data = IMX31_AUDMUX,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, imx_audmux_ids);
+
+static const uint8_t port_mapping[] = {
+	0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
+};
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+	if (audmux_type != IMX21_AUDMUX)
+		return -EINVAL;
+
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (port >= ARRAY_SIZE(port_mapping))
+		return -EINVAL;
+
+	writel(pcr, audmux_base + port_mapping[port]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr)
+{
+	if (audmux_type != IMX31_AUDMUX)
+		return -EINVAL;
+
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+
+static int __init imx_audmux_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	audmux_base = devm_request_and_ioremap(&pdev->dev, res);
+	if (!audmux_base)
+		return -EADDRNOTAVAIL;
+
+	audmux_clk = clk_get(&pdev->dev, "audmux");
+	if (IS_ERR(audmux_clk)) {
+		dev_dbg(&pdev->dev, "cannot get clock: %ld\n",
+				PTR_ERR(audmux_clk));
+		audmux_clk = NULL;
+	}
+
+	audmux_type = pdev->id_entry->driver_data;
+	if (audmux_type == IMX31_AUDMUX)
+		audmux_debugfs_init();
+
+	return 0;
+}
+
+static int __exit imx_audmux_remove(struct platform_device *pdev)
+{
+	if (audmux_type == IMX31_AUDMUX)
+		audmux_debugfs_remove();
+	clk_put(audmux_clk);
+
+	return 0;
+}
+
+static struct platform_driver imx_audmux_driver = {
+	.probe		= imx_audmux_probe,
+	.remove		= __exit_p(imx_audmux_remove),
+	.id_table	= imx_audmux_ids,
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	}
+};
+
+static int __init imx_audmux_init(void)
+{
+	return platform_driver_register(&imx_audmux_driver);
+}
+subsys_initcall(imx_audmux_init);
+
+static void __exit imx_audmux_exit(void)
+{
+	platform_driver_unregister(&imx_audmux_driver);
+}
+module_exit(imx_audmux_exit);
+
+MODULE_DESCRIPTION("Freescale i.MX AUDMUX driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/sound/soc/imx/imx-audmux.h b/sound/soc/imx/imx-audmux.h
new file mode 100644
index 0000000..5136d948
--- /dev/null
+++ b/sound/soc/imx/imx-audmux.h
@@ -0,0 +1,60 @@
+#ifndef __IMX_AUDMUX_H
+#define __IMX_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0		0
+#define MX27_AUDMUX_HPCR2_SSI1		1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
+
+#define MX31_AUDMUX_PORT1_SSI0		0
+#define MX31_AUDMUX_PORT2_SSI1		1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
+
+#define MX51_AUDMUX_PORT1_SSI0		0
+#define MX51_AUDMUX_PORT2_SSI1		1
+#define MX51_AUDMUX_PORT3		2
+#define MX51_AUDMUX_PORT4		3
+#define MX51_AUDMUX_PORT5		4
+#define MX51_AUDMUX_PORT6		5
+#define MX51_AUDMUX_PORT7		6
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
+#define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
+#define MXC_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
+#define MXC_AUDMUX_V1_PCR_SYN		(1 << 12)
+#define MXC_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
+#define MXC_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
+#define MXC_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
+#define MXC_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
+#define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
+#define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
+
+/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
+#define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
+#define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
+#define MXC_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
+#define MXC_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
+#define MXC_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
+#define MXC_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
+#define MXC_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
+#define MXC_AUDMUX_V2_PTCR_SYN		(1 << 11)
+
+#define MXC_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
+#define MXC_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
+#define MXC_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr);
+
+#endif /* __IMX_AUDMUX_H */
diff --git a/sound/soc/imx/mx27vis-aic32x4.c b/sound/soc/imx/mx27vis-aic32x4.c
index 155899c..dbfad0f 100644
--- a/sound/soc/imx/mx27vis-aic32x4.c
+++ b/sound/soc/imx/mx27vis-aic32x4.c
@@ -32,11 +32,11 @@
 #include <sound/soc-dapm.h>
 #include <sound/tlv.h>
 #include <asm/mach-types.h>
-#include <mach/audmux.h>
 #include <mach/iomux-mx27.h>
 
 #include "../codecs/tlv320aic32x4.h"
 #include "imx-ssi.h"
+#include "imx-audmux.h"
 
 #define MX27VIS_AMP_GAIN	0
 #define MX27VIS_AMP_MUTE	1
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index a59692e..7dab077 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -18,7 +18,8 @@
 #include <sound/pcm.h>
 #include <sound/soc.h>
 #include <asm/mach-types.h>
-#include <mach/audmux.h>
+
+#include "imx-audmux.h"
 
 static struct snd_soc_card imx_phycore;
 
diff --git a/sound/soc/imx/wm1133-ev1.c b/sound/soc/imx/wm1133-ev1.c
index 37480c9..15056d6 100644
--- a/sound/soc/imx/wm1133-ev1.c
+++ b/sound/soc/imx/wm1133-ev1.c
@@ -21,10 +21,9 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/audmux.h>
-
 #include "imx-ssi.h"
 #include "../codecs/wm8350.h"
+#include "imx-audmux.h"
 
 /* There is a silicon mic on the board optionally connected via a solder pad
  * SP1.  Define this to enable it.