ASoC: fsl_sai: Add clock controls for SAI

The SAI mainly has the following clocks:
  bus clock
    control and configure registers and to generate synchronous
    interrupts and DMA requests.

  mclk1, mclk2, mclk3
    to generate the bit clock when the receiver or transmitter is
    configured for an internally generated bit clock.

So this patch adds these clocks and their clock controls to the driver.

[ To concern the old DTB cases, I've added a bit of extra code to make
  the driver compatible with them. And by marking clock NULL if failed
  to get, the clk_prepare() or clk_get_rate() would easily return 0
  so no further path should be broken. -- by Nicolin ]

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Acked-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 36 insertions, 2 deletions

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index dde0842..1c93282 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -427,7 +427,15 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *cpu_dai)
 {
 	struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai);
+	struct device *dev = &sai->pdev->dev;
 	u32 reg;
+	int ret;
+
+	ret = clk_prepare_enable(sai->bus_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable bus clock: %d\n", ret);
+		return ret;
+	}
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		reg = FSL_SAI_TCR3;
@@ -453,6 +461,8 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream,
 
 	regmap_update_bits(sai->regmap, reg, FSL_SAI_CR3_TRCE,
 			   ~FSL_SAI_CR3_TRCE);
+
+	clk_disable_unprepare(sai->bus_clk);
 }
 
 static const struct snd_soc_dai_ops fsl_sai_pcm_dai_ops = {
@@ -585,7 +595,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
 	struct fsl_sai *sai;
 	struct resource *res;
 	void __iomem *base;
-	int irq, ret;
+	char tmp[8];
+	int irq, ret, i;
 
 	sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL);
 	if (!sai)
@@ -608,12 +619,35 @@ static int fsl_sai_probe(struct platform_device *pdev)
 		return PTR_ERR(base);
 
 	sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
-			"sai", base, &fsl_sai_regmap_config);
+			"bus", base, &fsl_sai_regmap_config);
+
+	/* Compatible with old DTB cases */
+	if (IS_ERR(sai->regmap))
+		sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
+				"sai", base, &fsl_sai_regmap_config);
 	if (IS_ERR(sai->regmap)) {
 		dev_err(&pdev->dev, "regmap init failed\n");
 		return PTR_ERR(sai->regmap);
 	}
 
+	/* No error out for old DTB cases but only mark the clock NULL */
+	sai->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (IS_ERR(sai->bus_clk)) {
+		dev_err(&pdev->dev, "failed to get bus clock: %ld\n",
+				PTR_ERR(sai->bus_clk));
+		sai->bus_clk = NULL;
+	}
+
+	for (i = 0; i < FSL_SAI_MCLK_MAX; i++) {
+		sprintf(tmp, "mclk%d", i + 1);
+		sai->mclk_clk[i] = devm_clk_get(&pdev->dev, tmp);
+		if (IS_ERR(sai->mclk_clk[i])) {
+			dev_err(&pdev->dev, "failed to get mclk%d clock: %ld\n",
+					i + 1, PTR_ERR(sai->mclk_clk[i]));
+			sai->mclk_clk[i] = NULL;
+		}
+	}
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq for node %s\n", np->full_name);