Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	sound/core/memalloc.c

34 files changed, 9571 insertions, 555 deletions

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 1db04a2..e0b9869 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1,16 +1,80 @@
+config SND_SOC_ALL_CODECS
+	tristate "Build all ASoC CODEC drivers"
+	depends on I2C
+	select SPI
+	select SPI_MASTER
+	select SND_SOC_AK4535
+	select SND_SOC_CS4270
+	select SND_SOC_SSM2602
+	select SND_SOC_TLV320AIC26
+	select SND_SOC_TLV320AIC3X
+	select SND_SOC_UDA1380
+	select SND_SOC_WM8510
+	select SND_SOC_WM8580
+	select SND_SOC_WM8731
+	select SND_SOC_WM8750
+	select SND_SOC_WM8753
+	select SND_SOC_WM8900
+	select SND_SOC_WM8903
+	select SND_SOC_WM8971
+	select SND_SOC_WM8990
+        help
+          Normally ASoC codec drivers are only built if a machine driver which
+          uses them is also built since they are only usable with a machine
+          driver.  Selecting this option will allow these drivers to be built
+          without an explicit machine driver for test and development purposes.
+
+          If unsure select "N".
+
+
 config SND_SOC_AC97_CODEC
 	tristate
 	select SND_AC97_CODEC
 
+config SND_SOC_AD1980
+	tristate
+
 config SND_SOC_AK4535
 	tristate
 
+# Cirrus Logic CS4270 Codec
+config SND_SOC_CS4270
+	tristate
+
+# Cirrus Logic CS4270 Codec Hardware Mute Support
+# Select if you have external muting circuitry attached to your CS4270.
+config SND_SOC_CS4270_HWMUTE
+	bool
+	depends on SND_SOC_CS4270
+
+# Cirrus Logic CS4270 Codec VD = 3.3V Errata
+# Select if you are affected by the errata where the part will not function
+# if MCLK divide-by-1.5 is selected and VD is set to 3.3V.  The driver will
+# not select any sample rates that require MCLK to be divided by 1.5.
+config SND_SOC_CS4270_VD33_ERRATA
+	bool
+	depends on SND_SOC_CS4270
+
+config SND_SOC_SSM2602
+	tristate
+
+config SND_SOC_TLV320AIC26
+	tristate "TI TLV320AIC26 Codec support"
+	depends on SND_SOC && SPI
+
+config SND_SOC_TLV320AIC3X
+	tristate
+	depends on I2C
+
 config SND_SOC_UDA1380
         tristate
 
 config SND_SOC_WM8510
 	tristate
 
+config SND_SOC_WM8580
+	tristate
+
 config SND_SOC_WM8731
 	tristate
 
@@ -20,33 +84,20 @@ config SND_SOC_WM8750
 config SND_SOC_WM8753
 	tristate
 
-config SND_SOC_WM8990
+config SND_SOC_WM8900
 	tristate
 
-config SND_SOC_WM9712
+config SND_SOC_WM8903
 	tristate
 
-config SND_SOC_WM9713
+config SND_SOC_WM8971
 	tristate
 
-# Cirrus Logic CS4270 Codec
-config SND_SOC_CS4270
+config SND_SOC_WM8990
 	tristate
 
-# Cirrus Logic CS4270 Codec Hardware Mute Support
-# Select if you have external muting circuitry attached to your CS4270.
-config SND_SOC_CS4270_HWMUTE
-	bool
-	depends on SND_SOC_CS4270
-
-# Cirrus Logic CS4270 Codec VD = 3.3V Errata
-# Select if you are affected by the errata where the part will not function
-# if MCLK divide-by-1.5 is selected and VD is set to 3.3V.  The driver will
-# not select any sample rates that require MCLK to be divided by 1.5.
-config SND_SOC_CS4270_VD33_ERRATA
-	bool
-	depends on SND_SOC_CS4270
+config SND_SOC_WM9712
+	tristate
 
-config SND_SOC_TLV320AIC3X
+config SND_SOC_WM9713
 	tristate
-	depends on I2C
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index d7b97ab..f977978 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -1,25 +1,39 @@
 snd-soc-ac97-objs := ac97.o
+snd-soc-ad1980-objs := ad1980.o
 snd-soc-ak4535-objs := ak4535.o
+snd-soc-cs4270-objs := cs4270.o
+snd-soc-ssm2602-objs := ssm2602.o
+snd-soc-tlv320aic26-objs := tlv320aic26.o
+snd-soc-tlv320aic3x-objs := tlv320aic3x.o
 snd-soc-uda1380-objs := uda1380.o
 snd-soc-wm8510-objs := wm8510.o
+snd-soc-wm8580-objs := wm8580.o
 snd-soc-wm8731-objs := wm8731.o
 snd-soc-wm8750-objs := wm8750.o
 snd-soc-wm8753-objs := wm8753.o
+snd-soc-wm8900-objs := wm8900.o
+snd-soc-wm8903-objs := wm8903.o
+snd-soc-wm8971-objs := wm8971.o
 snd-soc-wm8990-objs := wm8990.o
 snd-soc-wm9712-objs := wm9712.o
 snd-soc-wm9713-objs := wm9713.o
-snd-soc-cs4270-objs := cs4270.o
-snd-soc-tlv320aic3x-objs := tlv320aic3x.o
 
 obj-$(CONFIG_SND_SOC_AC97_CODEC)	+= snd-soc-ac97.o
+obj-$(CONFIG_SND_SOC_AD1980)	+= snd-soc-ad1980.o
 obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
+obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
+obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
+obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
+obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
 obj-$(CONFIG_SND_SOC_UDA1380)	+= snd-soc-uda1380.o
 obj-$(CONFIG_SND_SOC_WM8510)	+= snd-soc-wm8510.o
+obj-$(CONFIG_SND_SOC_WM8580)	+= snd-soc-wm8580.o
 obj-$(CONFIG_SND_SOC_WM8731)	+= snd-soc-wm8731.o
 obj-$(CONFIG_SND_SOC_WM8750)	+= snd-soc-wm8750.o
 obj-$(CONFIG_SND_SOC_WM8753)	+= snd-soc-wm8753.o
+obj-$(CONFIG_SND_SOC_WM8900)	+= snd-soc-wm8900.o
+obj-$(CONFIG_SND_SOC_WM8903)	+= snd-soc-wm8903.o
+obj-$(CONFIG_SND_SOC_WM8971)	+= snd-soc-wm8971.o
 obj-$(CONFIG_SND_SOC_WM8990)	+= snd-soc-wm8990.o
 obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
 obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
-obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
-obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
new file mode 100644
index 0000000..4e09c1f
--- /dev/null
+++ b/sound/soc/codecs/ad1980.c
@@ -0,0 +1,309 @@
+/*
+ * ad1980.c  --  ALSA Soc AD1980 codec support
+ *
+ * Copyright:	Analog Device Inc.
+ * Author:	Roy Huang <roy.huang@analog.com>
+ * 		Cliff Cai <cliff.cai@analog.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "ad1980.h"
+
+static unsigned int ac97_read(struct snd_soc_codec *codec,
+	unsigned int reg);
+static int ac97_write(struct snd_soc_codec *codec,
+	unsigned int reg, unsigned int val);
+
+/*
+ * AD1980 register cache
+ */
+static const u16 ad1980_reg[] = {
+	0x0090, 0x8000, 0x8000, 0x8000, /* 0 - 6  */
+	0x0000, 0x0000, 0x8008, 0x8008, /* 8 - e  */
+	0x8808, 0x8808, 0x0000, 0x8808, /* 10 - 16 */
+	0x8808, 0x0000, 0x8000, 0x0000, /* 18 - 1e */
+	0x0000, 0x0000, 0x0000, 0x0000, /* 20 - 26 */
+	0x03c7, 0x0000, 0xbb80, 0xbb80, /* 28 - 2e */
+	0xbb80, 0xbb80, 0x0000, 0x8080, /* 30 - 36 */
+	0x8080, 0x2000, 0x0000, 0x0000, /* 38 - 3e */
+	0x0000, 0x0000, 0x0000, 0x0000, /* reserved */
+	0x0000, 0x0000, 0x0000, 0x0000, /* reserved */
+	0x0000, 0x0000, 0x0000, 0x0000, /* reserved */
+	0x0000, 0x0000, 0x0000, 0x0000, /* reserved */
+	0x8080, 0x0000, 0x0000, 0x0000, /* 60 - 66 */
+	0x0000, 0x0000, 0x0000, 0x0000, /* reserved */
+	0x0000, 0x0000, 0x1001, 0x0000, /* 70 - 76 */
+	0x0000, 0x0000, 0x4144, 0x5370  /* 78 - 7e */
+};
+
+static const char *ad1980_rec_sel[] = {"Mic", "CD", "NC", "AUX", "Line",
+		"Stereo Mix", "Mono Mix", "Phone"};
+
+static const struct soc_enum ad1980_cap_src =
+	SOC_ENUM_DOUBLE(AC97_REC_SEL, 8, 0, 7, ad1980_rec_sel);
+
+static const struct snd_kcontrol_new ad1980_snd_ac97_controls[] = {
+SOC_DOUBLE("Master Playback Volume", AC97_MASTER, 8, 0, 31, 1),
+SOC_SINGLE("Master Playback Switch", AC97_MASTER, 15, 1, 1),
+
+SOC_DOUBLE("Headphone Playback Volume", AC97_HEADPHONE, 8, 0, 31, 1),
+SOC_SINGLE("Headphone Playback Switch", AC97_HEADPHONE, 15, 1, 1),
+
+SOC_DOUBLE("PCM Playback Volume", AC97_PCM, 8, 0, 31, 1),
+SOC_SINGLE("PCM Playback Switch", AC97_PCM, 15, 1, 1),
+
+SOC_DOUBLE("PCM Capture Volume", AC97_REC_GAIN, 8, 0, 31, 0),
+SOC_SINGLE("PCM Capture Switch", AC97_REC_GAIN, 15, 1, 1),
+
+SOC_SINGLE("Mono Playback Volume", AC97_MASTER_MONO, 0, 31, 1),
+SOC_SINGLE("Mono Playback Switch", AC97_MASTER_MONO, 15, 1, 1),
+
+SOC_SINGLE("Phone Capture Volume", AC97_PHONE, 0, 31, 1),
+SOC_SINGLE("Phone Capture Switch", AC97_PHONE, 15, 1, 1),
+
+SOC_SINGLE("Mic Volume", AC97_MIC, 0, 31, 1),
+SOC_SINGLE("Mic Switch", AC97_MIC, 15, 1, 1),
+
+SOC_SINGLE("Stereo Mic Switch", AC97_AD_MISC, 6, 1, 0),
+SOC_DOUBLE("Line HP Swap Switch", AC97_AD_MISC, 10, 5, 1, 0),
+
+SOC_DOUBLE("Surround Playback Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1),
+SOC_DOUBLE("Surround Playback Switch", AC97_SURROUND_MASTER, 15, 7, 1, 1),
+
+SOC_ENUM("Capture Source", ad1980_cap_src),
+
+SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0),
+};
+
+/* add non dapm controls */
+static int ad1980_add_controls(struct snd_soc_codec *codec)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(ad1980_snd_ac97_controls); i++) {
+		err = snd_ctl_add(codec->card, snd_soc_cnew(
+				&ad1980_snd_ac97_controls[i], codec, NULL));
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+
+static unsigned int ac97_read(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	switch (reg) {
+	case AC97_RESET:
+	case AC97_INT_PAGING:
+	case AC97_POWERDOWN:
+	case AC97_EXTENDED_STATUS:
+	case AC97_VENDOR_ID1:
+	case AC97_VENDOR_ID2:
+		return soc_ac97_ops.read(codec->ac97, reg);
+	default:
+		reg = reg >> 1;
+
+		if (reg >= (ARRAY_SIZE(ad1980_reg)))
+			return -EINVAL;
+
+		return cache[reg];
+	}
+}
+
+static int ac97_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int val)
+{
+	u16 *cache = codec->reg_cache;
+
+	soc_ac97_ops.write(codec->ac97, reg, val);
+	reg = reg >> 1;
+	if (reg < (ARRAY_SIZE(ad1980_reg)))
+		cache[reg] = val;
+
+	return 0;
+}
+
+struct snd_soc_dai ad1980_dai = {
+	.name = "AC97",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE, },
+};
+EXPORT_SYMBOL_GPL(ad1980_dai);
+
+static int ad1980_reset(struct snd_soc_codec *codec, int try_warm)
+{
+	u16 retry_cnt = 0;
+
+retry:
+	if (try_warm && soc_ac97_ops.warm_reset) {
+		soc_ac97_ops.warm_reset(codec->ac97);
+		if (ac97_read(codec, AC97_RESET) == 0x0090)
+			return 1;
+	}
+
+	soc_ac97_ops.reset(codec->ac97);
+	/* Set bit 16slot in register 74h, then every slot will has only 16
+	 * bits. This command is sent out in 20bit mode, in which case the
+	 * first nibble of data is eaten by the addr. (Tag is always 16 bit)*/
+	ac97_write(codec, AC97_AD_SERIAL_CFG, 0x9900);
+
+	if (ac97_read(codec, AC97_RESET)  != 0x0090)
+		goto err;
+	return 0;
+
+err:
+	while (retry_cnt++ < 10)
+		goto retry;
+
+	printk(KERN_ERR "AD1980 AC97 reset failed\n");
+	return -EIO;
+}
+
+static int ad1980_soc_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+	u16 vendor_id2;
+
+	printk(KERN_INFO "AD1980 SoC Audio Codec\n");
+
+	socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (socdev->codec == NULL)
+		return -ENOMEM;
+	codec = socdev->codec;
+	mutex_init(&codec->mutex);
+
+	codec->reg_cache =
+		kzalloc(sizeof(u16) * ARRAY_SIZE(ad1980_reg), GFP_KERNEL);
+	if (codec->reg_cache == NULL) {
+		ret = -ENOMEM;
+		goto cache_err;
+	}
+	memcpy(codec->reg_cache, ad1980_reg, sizeof(u16) * \
+			ARRAY_SIZE(ad1980_reg));
+	codec->reg_cache_size = sizeof(u16) * ARRAY_SIZE(ad1980_reg);
+	codec->reg_cache_step = 2;
+	codec->name = "AD1980";
+	codec->owner = THIS_MODULE;
+	codec->dai = &ad1980_dai;
+	codec->num_dai = 1;
+	codec->write = ac97_write;
+	codec->read = ac97_read;
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
+	if (ret < 0) {
+		printk(KERN_ERR "ad1980: failed to register AC97 codec\n");
+		goto codec_err;
+	}
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0)
+		goto pcm_err;
+
+
+	ret = ad1980_reset(codec, 0);
+	if (ret < 0) {
+		printk(KERN_ERR "AC97 link error\n");
+		goto reset_err;
+	}
+
+	/* Read out vendor ID to make sure it is ad1980 */
+	if (ac97_read(codec, AC97_VENDOR_ID1) != 0x4144)
+		goto reset_err;
+
+	vendor_id2 = ac97_read(codec, AC97_VENDOR_ID2);
+
+	if (vendor_id2 != 0x5370) {
+		if (vendor_id2 != 0x5374)
+			goto reset_err;
+		else
+			printk(KERN_WARNING "ad1980: "
+				"Found AD1981 - only 2/2 IN/OUT Channels "
+				"supported\n");
+	}
+
+	ac97_write(codec, AC97_MASTER, 0x0000); /* unmute line out volume */
+	ac97_write(codec, AC97_PCM, 0x0000);	/* unmute PCM out volume */
+	ac97_write(codec, AC97_REC_GAIN, 0x0000);/* unmute record volume */
+
+	ad1980_add_controls(codec);
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		printk(KERN_ERR "ad1980: failed to register card\n");
+		goto reset_err;
+	}
+
+	return 0;
+
+reset_err:
+	snd_soc_free_pcms(socdev);
+
+pcm_err:
+	snd_soc_free_ac97_codec(codec);
+
+codec_err:
+	kfree(codec->reg_cache);
+
+cache_err:
+	kfree(socdev->codec);
+	socdev->codec = NULL;
+	return ret;
+}
+
+static int ad1980_soc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	if (codec == NULL)
+		return 0;
+
+	snd_soc_dapm_free(socdev);
+	snd_soc_free_pcms(socdev);
+	snd_soc_free_ac97_codec(codec);
+	kfree(codec->reg_cache);
+	kfree(codec);
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ad1980 = {
+	.probe = 	ad1980_soc_probe,
+	.remove = 	ad1980_soc_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ad1980);
+
+MODULE_DESCRIPTION("ASoC ad1980 driver");
+MODULE_AUTHOR("Roy Huang, Cliff Cai");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ad1980.h b/sound/soc/codecs/ad1980.h
new file mode 100644
index 0000000..db6c850
--- /dev/null
+++ b/sound/soc/codecs/ad1980.h
@@ -0,0 +1,23 @@
+/*
+ * ad1980.h  --  ad1980 Soc Audio driver
+ */
+
+#ifndef _AD1980_H
+#define _AD1980_H
+/* Bit definition of Power-Down Control/Status Register */
+#define ADC		0x0001
+#define DAC		0x0002
+#define ANL		0x0004
+#define REF		0x0008
+#define PR0		0x0100
+#define PR1		0x0200
+#define PR2		0x0400
+#define PR3		0x0800
+#define PR4		0x1000
+#define PR5		0x2000
+#define PR6		0x4000
+
+extern struct snd_soc_dai ad1980_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ad1980;
+
+#endif
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index 7da9f467..088cf99 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -535,87 +535,85 @@ static struct snd_soc_device *ak4535_socdev;
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
-#define I2C_DRIVERID_AK4535 0xfefe /* liam -  need a proper id */
-
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver ak4535_i2c_driver;
-static struct i2c_client client_template;
-
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int ak4535_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = ak4535_socdev;
-	struct ak4535_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		printk(KERN_ERR "failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = ak4535_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		printk(KERN_ERR "failed to initialise AK4535\n");
-		goto err;
-	}
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int ak4535_i2c_detach(struct i2c_client *client)
+static int ak4535_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int ak4535_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, ak4535_codec_probe);
-}
+static const struct i2c_device_id ak4535_i2c_id[] = {
+	{ "ak4535", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ak4535_i2c_id);
 
-/* corgi i2c codec control layer */
 static struct i2c_driver ak4535_i2c_driver = {
 	.driver = {
 		.name = "AK4535 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_AK4535,
-	.attach_adapter = ak4535_i2c_attach,
-	.detach_client =  ak4535_i2c_detach,
-	.command =        NULL,
+	.probe =    ak4535_i2c_probe,
+	.remove =   ak4535_i2c_remove,
+	.id_table = ak4535_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "AK4535",
-	.driver = &ak4535_i2c_driver,
-};
+static int ak4535_add_i2c_device(struct platform_device *pdev,
+				 const struct ak4535_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&ak4535_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "ak4535", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&ak4535_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int ak4535_probe(struct platform_device *pdev)
@@ -624,7 +622,7 @@ static int ak4535_probe(struct platform_device *pdev)
 	struct ak4535_setup_data *setup;
 	struct snd_soc_codec *codec;
 	struct ak4535_priv *ak4535;
-	int ret = 0;
+	int ret;
 
 	printk(KERN_INFO "AK4535 Audio Codec %s", AK4535_VERSION);
 
@@ -646,17 +644,14 @@ static int ak4535_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&codec->dapm_paths);
 
 	ak4535_socdev = socdev;
+	ret = -ENODEV;
+
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
 		codec->hw_read = (hw_read_t)i2c_master_recv;
-		ret = i2c_add_driver(&ak4535_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = ak4535_add_i2c_device(pdev, setup);
 	}
-#else
-	/* Add other interfaces here */
 #endif
 
 	if (ret != 0) {
@@ -678,6 +673,7 @@ static int ak4535_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&ak4535_i2c_driver);
 #endif
 	kfree(codec->private_data);
diff --git a/sound/soc/codecs/ak4535.h b/sound/soc/codecs/ak4535.h
index e9fe30e..c7a5870 100644
--- a/sound/soc/codecs/ak4535.h
+++ b/sound/soc/codecs/ak4535.h
@@ -37,6 +37,7 @@
 #define AK4535_CACHEREGNUM 	0x10
 
 struct ak4535_setup_data {
+	int            i2c_bus;
 	unsigned short i2c_address;
 };
 
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 9deb8c7..0bbd945 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -490,34 +490,7 @@ static int cs4270_mute(struct snd_soc_dai *dai, int mute)
 
 #endif
 
-static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind);
-
-/*
- * Notify the driver that a new I2C bus has been found.
- *
- * This function is called for each I2C bus in the system.  The function
- * then asks the I2C subsystem to probe that bus at the addresses on which
- * our device (the CS4270) could exist.  If a device is found at one of
- * those addresses, then our probe function (cs4270_i2c_probe) is called.
- */
-static int cs4270_i2c_attach(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, cs4270_i2c_probe);
-}
-
-static int cs4270_i2c_detach(struct i2c_client *client)
-{
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-
-	i2c_detach_client(client);
-	codec->control_data = NULL;
-
-	kfree(codec->reg_cache);
-	codec->reg_cache = NULL;
-
-	kfree(client);
-	return 0;
-}
+static int cs4270_i2c_probe(struct i2c_client *, const struct i2c_device_id *);
 
 /* A list of non-DAPM controls that the CS4270 supports */
 static const struct snd_kcontrol_new cs4270_snd_controls[] = {
@@ -525,14 +498,19 @@ static const struct snd_kcontrol_new cs4270_snd_controls[] = {
 		CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1)
 };
 
+static const struct i2c_device_id cs4270_id[] = {
+	{"cs4270", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cs4270_id);
+
 static struct i2c_driver cs4270_i2c_driver = {
 	.driver = {
 		.name = "CS4270 I2C",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_CS4270,
-	.attach_adapter = cs4270_i2c_attach,
-	.detach_client =  cs4270_i2c_detach,
+	.id_table = cs4270_id,
+	.probe = cs4270_i2c_probe,
 };
 
 /*
@@ -561,11 +539,11 @@ static struct snd_soc_device *cs4270_socdev;
  * Note: snd_soc_new_pcms() must be called before this function can be called,
  * because of snd_ctl_add().
  */
-static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
+static int cs4270_i2c_probe(struct i2c_client *i2c_client,
+	const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = cs4270_socdev;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c_client = NULL;
 	int i;
 	int ret = 0;
 
@@ -578,12 +556,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 
 	/* Note: codec_dai->codec is NULL here */
 
-	i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
-	if (!i2c_client) {
-		printk(KERN_ERR "cs4270: could not allocate I2C client\n");
-		return -ENOMEM;
-	}
-
 	codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL);
 	if (!codec->reg_cache) {
 		printk(KERN_ERR "cs4270: could not allocate register cache\n");
@@ -591,13 +563,6 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 		goto error;
 	}
 
-	i2c_set_clientdata(i2c_client, codec);
-	strcpy(i2c_client->name, "CS4270");
-
-	i2c_client->driver = &cs4270_i2c_driver;
-	i2c_client->adapter = adapter;
-	i2c_client->addr = addr;
-
 	/* Verify that we have a CS4270 */
 
 	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
@@ -612,18 +577,10 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 		goto error;
 	}
 
-	printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr);
+	printk(KERN_INFO "cs4270: found device at I2C address %X\n",
+		i2c_client->addr);
 	printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF);
 
-	/* Tell the I2C layer a new client has arrived */
-
-	ret = i2c_attach_client(i2c_client);
-	if (ret) {
-		printk(KERN_ERR "cs4270: could not attach codec, "
-			"I2C address %x, error code %i\n", addr, ret);
-		goto error;
-	}
-
 	codec->control_data = i2c_client;
 	codec->read = cs4270_read_reg_cache;
 	codec->write = cs4270_i2c_write;
@@ -648,20 +605,17 @@ static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
 			goto error;
 	}
 
+	i2c_set_clientdata(i2c_client, codec);
+
 	return 0;
 
 error:
-	if (codec->control_data) {
-		i2c_detach_client(i2c_client);
-		codec->control_data = NULL;
-	}
+	codec->control_data = NULL;
 
 	kfree(codec->reg_cache);
 	codec->reg_cache = NULL;
 	codec->reg_cache_size = 0;
 
-	kfree(i2c_client);
-
 	return ret;
 }
 
@@ -727,7 +681,7 @@ static int cs4270_probe(struct platform_device *pdev)
 	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
 	if (ret < 0) {
 		printk(KERN_ERR "cs4270: failed to create PCMs\n");
-		return ret;
+		goto error_free_codec;
 	}
 
 #ifdef USE_I2C
@@ -736,8 +690,7 @@ static int cs4270_probe(struct platform_device *pdev)
 	ret = i2c_add_driver(&cs4270_i2c_driver);
 	if (ret) {
 		printk(KERN_ERR "cs4270: failed to attach driver");
-		snd_soc_free_pcms(socdev);
-		return ret;
+		goto error_free_pcms;
 	}
 
 	/* Did we find a CS4270 on the I2C bus? */
@@ -759,10 +712,23 @@ static int cs4270_probe(struct platform_device *pdev)
 	ret = snd_soc_register_card(socdev);
 	if (ret < 0) {
 		printk(KERN_ERR "cs4270: failed to register card\n");
-		snd_soc_free_pcms(socdev);
-		return ret;
+		goto error_del_driver;
 	}
 
+	return 0;
+
+error_del_driver:
+#ifdef USE_I2C
+	i2c_del_driver(&cs4270_i2c_driver);
+
+error_free_pcms:
+#endif
+	snd_soc_free_pcms(socdev);
+
+error_free_codec:
+	kfree(socdev->codec);
+	socdev->codec = NULL;
+
 	return ret;
 }
 
@@ -773,8 +739,7 @@ static int cs4270_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 
 #ifdef USE_I2C
-	if (socdev->codec->control_data)
-		i2c_del_driver(&cs4270_i2c_driver);
+	i2c_del_driver(&cs4270_i2c_driver);
 #endif
 
 	kfree(socdev->codec);
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
new file mode 100644
index 0000000..940ce1c
--- /dev/null
+++ b/sound/soc/codecs/ssm2602.c
@@ -0,0 +1,776 @@
+/*
+ * File:         sound/soc/codecs/ssm2602.c
+ * Author:       Cliff Cai <Cliff.Cai@analog.com>
+ *
+ * Created:      Tue June 06 2008
+ * Description:  Driver for ssm2602 sound chip
+ *
+ * Modified:
+ *               Copyright 2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "ssm2602.h"
+
+#define AUDIO_NAME "ssm2602"
+#define SSM2602_VERSION "0.1"
+
+struct snd_soc_codec_device soc_codec_dev_ssm2602;
+
+/* codec private data */
+struct ssm2602_priv {
+	unsigned int sysclk;
+	struct snd_pcm_substream *master_substream;
+	struct snd_pcm_substream *slave_substream;
+};
+
+/*
+ * ssm2602 register cache
+ * We can't read the ssm2602 register space when we are
+ * using 2 wire for device control, so we cache them instead.
+ * There is no point in caching the reset register
+ */
+static const u16 ssm2602_reg[SSM2602_CACHEREGNUM] = {
+	0x0017, 0x0017, 0x0079, 0x0079,
+	0x0000, 0x0000, 0x0000, 0x000a,
+	0x0000, 0x0000
+};
+
+/*
+ * read ssm2602 register cache
+ */
+static inline unsigned int ssm2602_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg == SSM2602_RESET)
+		return 0;
+	if (reg >= SSM2602_CACHEREGNUM)
+		return -1;
+	return cache[reg];
+}
+
+/*
+ * write ssm2602 register cache
+ */
+static inline void ssm2602_write_reg_cache(struct snd_soc_codec *codec,
+	u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg >= SSM2602_CACHEREGNUM)
+		return;
+	cache[reg] = value;
+}
+
+/*
+ * write to the ssm2602 register space
+ */
+static int ssm2602_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 ssm2602 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	ssm2602_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define ssm2602_reset(c)	ssm2602_write(c, SSM2602_RESET, 0)
+
+/*Appending several "None"s just for OSS mixer use*/
+static const char *ssm2602_input_select[] = {
+	"Line", "Mic", "None", "None", "None",
+	"None", "None", "None",
+};
+
+static const char *ssm2602_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+
+static const struct soc_enum ssm2602_enum[] = {
+	SOC_ENUM_SINGLE(SSM2602_APANA, 2, 2, ssm2602_input_select),
+	SOC_ENUM_SINGLE(SSM2602_APDIGI, 1, 4, ssm2602_deemph),
+};
+
+static const struct snd_kcontrol_new ssm2602_snd_controls[] = {
+
+SOC_DOUBLE_R("Master Playback Volume", SSM2602_LOUT1V, SSM2602_ROUT1V,
+	0, 127, 0),
+SOC_DOUBLE_R("Master Playback ZC Switch", SSM2602_LOUT1V, SSM2602_ROUT1V,
+	7, 1, 0),
+
+SOC_DOUBLE_R("Capture Volume", SSM2602_LINVOL, SSM2602_RINVOL, 0, 31, 0),
+SOC_DOUBLE_R("Capture Switch", SSM2602_LINVOL, SSM2602_RINVOL, 7, 1, 1),
+
+SOC_SINGLE("Mic Boost (+20dB)", SSM2602_APANA, 0, 1, 0),
+SOC_SINGLE("Mic Switch", SSM2602_APANA, 1, 1, 1),
+
+SOC_SINGLE("Sidetone Playback Volume", SSM2602_APANA, 6, 3, 1),
+
+SOC_SINGLE("ADC High Pass Filter Switch", SSM2602_APDIGI, 0, 1, 1),
+SOC_SINGLE("Store DC Offset Switch", SSM2602_APDIGI, 4, 1, 0),
+
+SOC_ENUM("Capture Source", ssm2602_enum[0]),
+
+SOC_ENUM("Playback De-emphasis", ssm2602_enum[1]),
+};
+
+/* add non dapm controls */
+static int ssm2602_add_controls(struct snd_soc_codec *codec)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(ssm2602_snd_controls); i++) {
+		err = snd_ctl_add(codec->card,
+			snd_soc_cnew(&ssm2602_snd_controls[i], codec, NULL));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+/* Output Mixer */
+static const struct snd_kcontrol_new ssm2602_output_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Bypass Switch", SSM2602_APANA, 3, 1, 0),
+SOC_DAPM_SINGLE("Mic Sidetone Switch", SSM2602_APANA, 5, 1, 0),
+SOC_DAPM_SINGLE("HiFi Playback Switch", SSM2602_APANA, 4, 1, 0),
+};
+
+/* Input mux */
+static const struct snd_kcontrol_new ssm2602_input_mux_controls =
+SOC_DAPM_ENUM("Input Select", ssm2602_enum[0]);
+
+static const struct snd_soc_dapm_widget ssm2602_dapm_widgets[] = {
+SND_SOC_DAPM_MIXER("Output Mixer", SSM2602_PWR, 4, 1,
+	&ssm2602_output_mixer_controls[0],
+	ARRAY_SIZE(ssm2602_output_mixer_controls)),
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", SSM2602_PWR, 3, 1),
+SND_SOC_DAPM_OUTPUT("LOUT"),
+SND_SOC_DAPM_OUTPUT("LHPOUT"),
+SND_SOC_DAPM_OUTPUT("ROUT"),
+SND_SOC_DAPM_OUTPUT("RHPOUT"),
+SND_SOC_DAPM_ADC("ADC", "HiFi Capture", SSM2602_PWR, 2, 1),
+SND_SOC_DAPM_MUX("Input Mux", SND_SOC_NOPM, 0, 0, &ssm2602_input_mux_controls),
+SND_SOC_DAPM_PGA("Line Input", SSM2602_PWR, 0, 1, NULL, 0),
+SND_SOC_DAPM_MICBIAS("Mic Bias", SSM2602_PWR, 1, 1),
+SND_SOC_DAPM_INPUT("MICIN"),
+SND_SOC_DAPM_INPUT("RLINEIN"),
+SND_SOC_DAPM_INPUT("LLINEIN"),
+};
+
+static const struct snd_soc_dapm_route audio_conn[] = {
+	/* output mixer */
+	{"Output Mixer", "Line Bypass Switch", "Line Input"},
+	{"Output Mixer", "HiFi Playback Switch", "DAC"},
+	{"Output Mixer", "Mic Sidetone Switch", "Mic Bias"},
+
+	/* outputs */
+	{"RHPOUT", NULL, "Output Mixer"},
+	{"ROUT", NULL, "Output Mixer"},
+	{"LHPOUT", NULL, "Output Mixer"},
+	{"LOUT", NULL, "Output Mixer"},
+
+	/* input mux */
+	{"Input Mux", "Line", "Line Input"},
+	{"Input Mux", "Mic", "Mic Bias"},
+	{"ADC", NULL, "Input Mux"},
+
+	/* inputs */
+	{"Line Input", NULL, "LLINEIN"},
+	{"Line Input", NULL, "RLINEIN"},
+	{"Mic Bias", NULL, "MICIN"},
+};
+
+static int ssm2602_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, ssm2602_dapm_widgets,
+				  ARRAY_SIZE(ssm2602_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_conn, ARRAY_SIZE(audio_conn));
+
+	snd_soc_dapm_new_widgets(codec);
+	return 0;
+}
+
+struct _coeff_div {
+	u32 mclk;
+	u32 rate;
+	u16 fs;
+	u8 sr:4;
+	u8 bosr:1;
+	u8 usb:1;
+};
+
+/* codec mclk clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+	/* 48k */
+	{12288000, 48000, 256, 0x0, 0x0, 0x0},
+	{18432000, 48000, 384, 0x0, 0x1, 0x0},
+	{12000000, 48000, 250, 0x0, 0x0, 0x1},
+
+	/* 32k */
+	{12288000, 32000, 384, 0x6, 0x0, 0x0},
+	{18432000, 32000, 576, 0x6, 0x1, 0x0},
+	{12000000, 32000, 375, 0x6, 0x0, 0x1},
+
+	/* 8k */
+	{12288000, 8000, 1536, 0x3, 0x0, 0x0},
+	{18432000, 8000, 2304, 0x3, 0x1, 0x0},
+	{11289600, 8000, 1408, 0xb, 0x0, 0x0},
+	{16934400, 8000, 2112, 0xb, 0x1, 0x0},
+	{12000000, 8000, 1500, 0x3, 0x0, 0x1},
+
+	/* 96k */
+	{12288000, 96000, 128, 0x7, 0x0, 0x0},
+	{18432000, 96000, 192, 0x7, 0x1, 0x0},
+	{12000000, 96000, 125, 0x7, 0x0, 0x1},
+
+	/* 44.1k */
+	{11289600, 44100, 256, 0x8, 0x0, 0x0},
+	{16934400, 44100, 384, 0x8, 0x1, 0x0},
+	{12000000, 44100, 272, 0x8, 0x1, 0x1},
+
+	/* 88.2k */
+	{11289600, 88200, 128, 0xf, 0x0, 0x0},
+	{16934400, 88200, 192, 0xf, 0x1, 0x0},
+	{12000000, 88200, 136, 0xf, 0x1, 0x1},
+};
+
+static inline int get_coeff(int mclk, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+		if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+			return i;
+	}
+	return i;
+}
+
+static int ssm2602_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	u16 srate;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct ssm2602_priv *ssm2602 = codec->private_data;
+	u16 iface = ssm2602_read_reg_cache(codec, SSM2602_IFACE) & 0xfff3;
+	int i = get_coeff(ssm2602->sysclk, params_rate(params));
+
+	/*no match is found*/
+	if (i == ARRAY_SIZE(coeff_div))
+		return -EINVAL;
+
+	srate = (coeff_div[i].sr << 2) |
+		(coeff_div[i].bosr << 1) | coeff_div[i].usb;
+
+	ssm2602_write(codec, SSM2602_ACTIVE, 0);
+	ssm2602_write(codec, SSM2602_SRATE, srate);
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= 0x000c;
+		break;
+	}
+	ssm2602_write(codec, SSM2602_IFACE, iface);
+	ssm2602_write(codec, SSM2602_ACTIVE, ACTIVE_ACTIVATE_CODEC);
+	return 0;
+}
+
+static int ssm2602_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct ssm2602_priv *ssm2602 = codec->private_data;
+	struct snd_pcm_runtime *master_runtime;
+
+	/* The DAI has shared clocks so if we already have a playback or
+	 * capture going then constrain this substream to match it.
+	 */
+	if (ssm2602->master_substream) {
+		master_runtime = ssm2602->master_substream->runtime;
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+					     SNDRV_PCM_HW_PARAM_RATE,
+					     master_runtime->rate,
+					     master_runtime->rate);
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+					     master_runtime->sample_bits,
+					     master_runtime->sample_bits);
+
+		ssm2602->slave_substream = substream;
+	} else
+		ssm2602->master_substream = substream;
+
+	return 0;
+}
+
+static int ssm2602_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	/* set active */
+	ssm2602_write(codec, SSM2602_ACTIVE, ACTIVE_ACTIVATE_CODEC);
+
+	return 0;
+}
+
+static void ssm2602_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	/* deactivate */
+	if (!codec->active)
+		ssm2602_write(codec, SSM2602_ACTIVE, 0);
+}
+
+static int ssm2602_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = ssm2602_read_reg_cache(codec, SSM2602_APDIGI) & ~APDIGI_ENABLE_DAC_MUTE;
+	if (mute)
+		ssm2602_write(codec, SSM2602_APDIGI,
+				mute_reg | APDIGI_ENABLE_DAC_MUTE);
+	else
+		ssm2602_write(codec, SSM2602_APDIGI, mute_reg);
+	return 0;
+}
+
+static int ssm2602_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct ssm2602_priv *ssm2602 = codec->private_data;
+	switch (freq) {
+	case 11289600:
+	case 12000000:
+	case 12288000:
+	case 16934400:
+	case 18432000:
+		ssm2602->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface |= 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set iface */
+	ssm2602_write(codec, SSM2602_IFACE, iface);
+	return 0;
+}
+
+static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 reg = ssm2602_read_reg_cache(codec, SSM2602_PWR) & 0xff7f;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* vref/mid, osc on, dac unmute */
+		ssm2602_write(codec, SSM2602_PWR, reg);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		/* everything off except vref/vmid, */
+		ssm2602_write(codec, SSM2602_PWR, reg | PWR_CLK_OUT_PDN);
+		break;
+	case SND_SOC_BIAS_OFF:
+		/* everything off, dac mute, inactive */
+		ssm2602_write(codec, SSM2602_ACTIVE, 0);
+		ssm2602_write(codec, SSM2602_PWR, 0xffff);
+		break;
+
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define SSM2602_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+		SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
+		SNDRV_PCM_RATE_96000)
+
+struct snd_soc_dai ssm2602_dai = {
+	.name = "SSM2602",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SSM2602_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SSM2602_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE,},
+	.ops = {
+		.startup = ssm2602_startup,
+		.prepare = ssm2602_pcm_prepare,
+		.hw_params = ssm2602_hw_params,
+		.shutdown = ssm2602_shutdown,
+	},
+	.dai_ops = {
+		.digital_mute = ssm2602_mute,
+		.set_sysclk = ssm2602_set_dai_sysclk,
+		.set_fmt = ssm2602_set_dai_fmt,
+	}
+};
+EXPORT_SYMBOL_GPL(ssm2602_dai);
+
+static int ssm2602_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	ssm2602_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int ssm2602_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < ARRAY_SIZE(ssm2602_reg); i++) {
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+	ssm2602_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	ssm2602_set_bias_level(codec, codec->suspend_bias_level);
+	return 0;
+}
+
+/*
+ * initialise the ssm2602 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int ssm2602_init(struct snd_soc_device *socdev)
+{
+	struct snd_soc_codec *codec = socdev->codec;
+	int reg, ret = 0;
+
+	codec->name = "SSM2602";
+	codec->owner = THIS_MODULE;
+	codec->read = ssm2602_read_reg_cache;
+	codec->write = ssm2602_write;
+	codec->set_bias_level = ssm2602_set_bias_level;
+	codec->dai = &ssm2602_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = sizeof(ssm2602_reg);
+	codec->reg_cache = kmemdup(ssm2602_reg, sizeof(ssm2602_reg),
+					GFP_KERNEL);
+	if (codec->reg_cache == NULL)
+		return -ENOMEM;
+
+	ssm2602_reset(codec);
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		pr_err("ssm2602: failed to create pcms\n");
+		goto pcm_err;
+	}
+	/*power on device*/
+	ssm2602_write(codec, SSM2602_ACTIVE, 0);
+	/* set the update bits */
+	reg = ssm2602_read_reg_cache(codec, SSM2602_LINVOL);
+	ssm2602_write(codec, SSM2602_LINVOL, reg | LINVOL_LRIN_BOTH);
+	reg = ssm2602_read_reg_cache(codec, SSM2602_RINVOL);
+	ssm2602_write(codec, SSM2602_RINVOL, reg | RINVOL_RLIN_BOTH);
+	reg = ssm2602_read_reg_cache(codec, SSM2602_LOUT1V);
+	ssm2602_write(codec, SSM2602_LOUT1V, reg | LOUT1V_LRHP_BOTH);
+	reg = ssm2602_read_reg_cache(codec, SSM2602_ROUT1V);
+	ssm2602_write(codec, SSM2602_ROUT1V, reg | ROUT1V_RLHP_BOTH);
+	/*select Line in as default input*/
+	ssm2602_write(codec, SSM2602_APANA,
+			APANA_ENABLE_MIC_BOOST2 | APANA_SELECT_DAC |
+			APANA_ENABLE_MIC_BOOST);
+	ssm2602_write(codec, SSM2602_PWR, 0);
+
+	ssm2602_add_controls(codec);
+	ssm2602_add_widgets(codec);
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		pr_err("ssm2602: failed to register card\n");
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	kfree(codec->reg_cache);
+	return ret;
+}
+
+static struct snd_soc_device *ssm2602_socdev;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/*
+ * ssm2602 2 wire address is determined by GPIO5
+ * state during powerup.
+ *    low  = 0x1a
+ *    high = 0x1b
+ */
+static int ssm2602_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
+{
+	struct snd_soc_device *socdev = ssm2602_socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret;
+
+	i2c_set_clientdata(i2c, codec);
+	codec->control_data = i2c;
+
+	ret = ssm2602_init(socdev);
+	if (ret < 0)
+		pr_err("failed to initialise SSM2602\n");
+
+	return ret;
+}
+
+static int ssm2602_i2c_remove(struct i2c_client *client)
+{
+	struct snd_soc_codec *codec = i2c_get_clientdata(client);
+	kfree(codec->reg_cache);
+	return 0;
+}
+
+static const struct i2c_device_id ssm2602_i2c_id[] = {
+	{ "ssm2602", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ssm2602_i2c_id);
+/* corgi i2c codec control layer */
+static struct i2c_driver ssm2602_i2c_driver = {
+	.driver = {
+		.name = "SSM2602 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe = ssm2602_i2c_probe,
+	.remove = ssm2602_i2c_remove,
+	.id_table = ssm2602_i2c_id,
+};
+
+static int ssm2602_add_i2c_device(struct platform_device *pdev,
+				  const struct ssm2602_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&ssm2602_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "ssm2602", I2C_NAME_SIZE);
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+		setup->i2c_bus);
+		goto err_driver;
+	}
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+		(unsigned int)info.addr);
+		goto err_driver;
+	}
+	return 0;
+err_driver:
+	i2c_del_driver(&ssm2602_i2c_driver);
+	return -ENODEV;
+}
+#endif
+
+static int ssm2602_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct ssm2602_setup_data *setup;
+	struct snd_soc_codec *codec;
+	struct ssm2602_priv *ssm2602;
+	int ret = 0;
+
+	pr_info("ssm2602 Audio Codec %s", SSM2602_VERSION);
+
+	setup = socdev->codec_data;
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	ssm2602 = kzalloc(sizeof(struct ssm2602_priv), GFP_KERNEL);
+	if (ssm2602 == NULL) {
+		kfree(codec);
+		return -ENOMEM;
+	}
+
+	codec->private_data = ssm2602;
+	socdev->codec = codec;
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	ssm2602_socdev = socdev;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	if (setup->i2c_address) {
+		codec->hw_write = (hw_write_t)i2c_master_send;
+		ret = ssm2602_add_i2c_device(pdev, setup);
+	}
+#else
+	/* other interfaces */
+#endif
+	return ret;
+}
+
+/* remove everything here */
+static int ssm2602_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	if (codec->control_data)
+		ssm2602_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
+	i2c_del_driver(&ssm2602_i2c_driver);
+#endif
+	kfree(codec->private_data);
+	kfree(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ssm2602 = {
+	.probe = 	ssm2602_probe,
+	.remove = 	ssm2602_remove,
+	.suspend = 	ssm2602_suspend,
+	.resume =	ssm2602_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ssm2602);
+
+MODULE_DESCRIPTION("ASoC ssm2602 driver");
+MODULE_AUTHOR("Cliff Cai");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ssm2602.h b/sound/soc/codecs/ssm2602.h
new file mode 100644
index 0000000..f344e6d
--- /dev/null
+++ b/sound/soc/codecs/ssm2602.h
@@ -0,0 +1,130 @@
+/*
+ * File:         sound/soc/codecs/ssm2602.h
+ * Author:       Cliff Cai <Cliff.Cai@analog.com>
+ *
+ * Created:      Tue June 06 2008
+ *
+ * Modified:
+ *               Copyright 2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef _SSM2602_H
+#define _SSM2602_H
+
+/* SSM2602 Codec Register definitions */
+
+#define SSM2602_LINVOL   0x00
+#define SSM2602_RINVOL   0x01
+#define SSM2602_LOUT1V   0x02
+#define SSM2602_ROUT1V   0x03
+#define SSM2602_APANA    0x04
+#define SSM2602_APDIGI   0x05
+#define SSM2602_PWR      0x06
+#define SSM2602_IFACE    0x07
+#define SSM2602_SRATE    0x08
+#define SSM2602_ACTIVE   0x09
+#define SSM2602_RESET	 0x0f
+
+/*SSM2602 Codec Register Field definitions
+ *(Mask value to extract the corresponding Register field)
+ */
+
+/*Left ADC Volume Control (SSM2602_REG_LEFT_ADC_VOL)*/
+#define     LINVOL_LIN_VOL                0x01F   /* Left Channel PGA Volume control                      */
+#define     LINVOL_LIN_ENABLE_MUTE        0x080   /* Left Channel Input Mute                              */
+#define     LINVOL_LRIN_BOTH              0x100   /* Left Channel Line Input Volume update                */
+
+/*Right ADC Volume Control (SSM2602_REG_RIGHT_ADC_VOL)*/
+#define     RINVOL_RIN_VOL                0x01F   /* Right Channel PGA Volume control                     */
+#define     RINVOL_RIN_ENABLE_MUTE        0x080   /* Right Channel Input Mute                             */
+#define     RINVOL_RLIN_BOTH              0x100   /* Right Channel Line Input Volume update               */
+
+/*Left DAC Volume Control (SSM2602_REG_LEFT_DAC_VOL)*/
+#define     LOUT1V_LHP_VOL                0x07F   /* Left Channel Headphone volume control                */
+#define     LOUT1V_ENABLE_LZC             0x080   /* Left Channel Zero cross detect enable                */
+#define     LOUT1V_LRHP_BOTH              0x100   /* Left Channel Headphone volume update                 */
+
+/*Right DAC Volume Control (SSM2602_REG_RIGHT_DAC_VOL)*/
+#define     ROUT1V_RHP_VOL                0x07F   /* Right Channel Headphone volume control               */
+#define     ROUT1V_ENABLE_RZC             0x080   /* Right Channel Zero cross detect enable               */
+#define     ROUT1V_RLHP_BOTH              0x100   /* Right Channel Headphone volume update                */
+
+/*Analogue Audio Path Control (SSM2602_REG_ANALOGUE_PATH)*/
+#define     APANA_ENABLE_MIC_BOOST       0x001   /* Primary Microphone Amplifier gain booster control    */
+#define     APANA_ENABLE_MIC_MUTE        0x002   /* Microphone Mute Control                              */
+#define     APANA_ADC_IN_SELECT          0x004   /* Microphone/Line IN select to ADC (1=MIC, 0=Line In)  */
+#define     APANA_ENABLE_BYPASS          0x008   /* Line input bypass to line output                     */
+#define     APANA_SELECT_DAC             0x010   /* Select DAC (1=Select DAC, 0=Don't Select DAC)        */
+#define     APANA_ENABLE_SIDETONE        0x020   /* Enable/Disable Side Tone                             */
+#define     APANA_SIDETONE_ATTN          0x0C0   /* Side Tone Attenuation                                */
+#define     APANA_ENABLE_MIC_BOOST2      0x100   /* Secondary Microphone Amplifier gain booster control  */
+
+/*Digital Audio Path Control (SSM2602_REG_DIGITAL_PATH)*/
+#define     APDIGI_ENABLE_ADC_HPF         0x001   /* Enable/Disable ADC Highpass Filter                   */
+#define     APDIGI_DE_EMPHASIS            0x006   /* De-Emphasis Control                                  */
+#define     APDIGI_ENABLE_DAC_MUTE        0x008   /* DAC Mute Control                                     */
+#define     APDIGI_STORE_OFFSET           0x010   /* Store/Clear DC offset when HPF is disabled           */
+
+/*Power Down Control (SSM2602_REG_POWER)
+ *(1=Enable PowerDown, 0=Disable PowerDown)
+ */
+#define     PWR_LINE_IN_PDN            0x001   /* Line Input Power Down                                */
+#define     PWR_MIC_PDN                0x002   /* Microphone Input & Bias Power Down                   */
+#define     PWR_ADC_PDN                0x004   /* ADC Power Down                                       */
+#define     PWR_DAC_PDN                0x008   /* DAC Power Down                                       */
+#define     PWR_OUT_PDN                0x010   /* Outputs Power Down                                   */
+#define     PWR_OSC_PDN                0x020   /* Oscillator Power Down                                */
+#define     PWR_CLK_OUT_PDN            0x040   /* CLKOUT Power Down                                    */
+#define     PWR_POWER_OFF              0x080   /* POWEROFF Mode                                        */
+
+/*Digital Audio Interface Format (SSM2602_REG_DIGITAL_IFACE)*/
+#define     IFACE_IFACE_FORMAT           0x003   /* Digital Audio input format control                   */
+#define     IFACE_AUDIO_DATA_LEN         0x00C   /* Audio Data word length control                       */
+#define     IFACE_DAC_LR_POLARITY        0x010   /* Polarity Control for clocks in RJ,LJ and I2S modes   */
+#define     IFACE_DAC_LR_SWAP            0x020   /* Swap DAC data control                                */
+#define     IFACE_ENABLE_MASTER          0x040   /* Enable/Disable Master Mode                           */
+#define     IFACE_BCLK_INVERT            0x080   /* Bit Clock Inversion control                          */
+
+/*Sampling Control (SSM2602_REG_SAMPLING_CTRL)*/
+#define     SRATE_ENABLE_USB_MODE        0x001   /* Enable/Disable USB Mode                              */
+#define     SRATE_BOS_RATE               0x002   /* Base Over-Sampling rate                              */
+#define     SRATE_SAMPLE_RATE            0x03C   /* Clock setting condition (Sampling rate control)      */
+#define     SRATE_CORECLK_DIV2           0x040   /* Core Clock divider select                            */
+#define     SRATE_CLKOUT_DIV2            0x080   /* Clock Out divider select                             */
+
+/*Active Control (SSM2602_REG_ACTIVE_CTRL)*/
+#define     ACTIVE_ACTIVATE_CODEC         0x001   /* Activate Codec Digital Audio Interface               */
+
+/*********************************************************************/
+
+#define SSM2602_CACHEREGNUM 	10
+
+#define SSM2602_SYSCLK	0
+#define SSM2602_DAI		0
+
+struct ssm2602_setup_data {
+	int i2c_bus;
+	unsigned short i2c_address;
+};
+
+extern struct snd_soc_dai ssm2602_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ssm2602;
+
+#endif
diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
new file mode 100644
index 0000000..bed8a9e
--- /dev/null
+++ b/sound/soc/codecs/tlv320aic26.c
@@ -0,0 +1,520 @@
+/*
+ * Texas Instruments TLV320AIC26 low power audio CODEC
+ * ALSA SoC CODEC driver
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/soc-of-simple.h>
+#include <sound/initval.h>
+
+#include "tlv320aic26.h"
+
+MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver");
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_LICENSE("GPL");
+
+/* AIC26 driver private data */
+struct aic26 {
+	struct spi_device *spi;
+	struct snd_soc_codec codec;
+	u16 reg_cache[AIC26_NUM_REGS];	/* shadow registers */
+	int master;
+	int datfm;
+	int mclk;
+
+	/* Keyclick parameters */
+	int keyclick_amplitude;
+	int keyclick_freq;
+	int keyclick_len;
+};
+
+/* ---------------------------------------------------------------------
+ * Register access routines
+ */
+static unsigned int aic26_reg_read(struct snd_soc_codec *codec,
+				   unsigned int reg)
+{
+	struct aic26 *aic26 = codec->private_data;
+	u16 *cache = codec->reg_cache;
+	u16 cmd, value;
+	u8 buffer[2];
+	int rc;
+
+	if (reg >= AIC26_NUM_REGS) {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	/* Do SPI transfer; first 16bits are command; remaining is
+	 * register contents */
+	cmd = AIC26_READ_COMMAND_WORD(reg);
+	buffer[0] = (cmd >> 8) & 0xff;
+	buffer[1] = cmd & 0xff;
+	rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2);
+	if (rc) {
+		dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
+		return -EIO;
+	}
+	value = (buffer[0] << 8) | buffer[1];
+
+	/* Update the cache before returning with the value */
+	cache[reg] = value;
+	return value;
+}
+
+static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec,
+					 unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	if (reg >= AIC26_NUM_REGS) {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+
+	return cache[reg];
+}
+
+static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg,
+			   unsigned int value)
+{
+	struct aic26 *aic26 = codec->private_data;
+	u16 *cache = codec->reg_cache;
+	u16 cmd;
+	u8 buffer[4];
+	int rc;
+
+	if (reg >= AIC26_NUM_REGS) {
+		WARN_ON_ONCE(1);
+		return -EINVAL;
+	}
+
+	/* Do SPI transfer; first 16bits are command; remaining is data
+	 * to write into register */
+	cmd = AIC26_WRITE_COMMAND_WORD(reg);
+	buffer[0] = (cmd >> 8) & 0xff;
+	buffer[1] = cmd & 0xff;
+	buffer[2] = value >> 8;
+	buffer[3] = value;
+	rc = spi_write(aic26->spi, buffer, 4);
+	if (rc) {
+		dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
+		return -EIO;
+	}
+
+	/* update cache before returning */
+	cache[reg] = value;
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Digital Audio Interface Operations
+ */
+static int aic26_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct aic26 *aic26 = codec->private_data;
+	int fsref, divisor, wlen, pval, jval, dval, qval;
+	u16 reg;
+
+	dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n",
+		substream, params);
+	dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params),
+		params_format(params));
+
+	switch (params_rate(params)) {
+	case 8000:  fsref = 48000; divisor = AIC26_DIV_6; break;
+	case 11025: fsref = 44100; divisor = AIC26_DIV_4; break;
+	case 12000: fsref = 48000; divisor = AIC26_DIV_4; break;
+	case 16000: fsref = 48000; divisor = AIC26_DIV_3; break;
+	case 22050: fsref = 44100; divisor = AIC26_DIV_2; break;
+	case 24000: fsref = 48000; divisor = AIC26_DIV_2; break;
+	case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break;
+	case 44100: fsref = 44100; divisor = AIC26_DIV_1; break;
+	case 48000: fsref = 48000; divisor = AIC26_DIV_1; break;
+	default:
+		dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL;
+	}
+
+	/* select data word length */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:     wlen = AIC26_WLEN_16; break;
+	case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break;
+	case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break;
+	case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break;
+	default:
+		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
+	}
+
+	/* Configure PLL */
+	pval = 1;
+	jval = (fsref == 44100) ? 7 : 8;
+	dval = (fsref == 44100) ? 5264 : 1920;
+	qval = 0;
+	reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
+	aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
+	reg = dval << 2;
+	aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg);
+
+	/* Audio Control 3 (master mode, fsref rate) */
+	reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3);
+	reg &= ~0xf800;
+	if (aic26->master)
+		reg |= 0x0800;
+	if (fsref == 48000)
+		reg |= 0x2000;
+	aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
+
+	/* Audio Control 1 (FSref divisor) */
+	reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1);
+	reg &= ~0x0fff;
+	reg |= wlen | aic26->datfm | (divisor << 3) | divisor;
+	aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
+
+	return 0;
+}
+
+/**
+ * aic26_mute - Mute control to reduce noise when changing audio format
+ */
+static int aic26_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct aic26 *aic26 = codec->private_data;
+	u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN);
+
+	dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n",
+		dai, mute);
+
+	if (mute)
+		reg |= 0x8080;
+	else
+		reg &= ~0x8080;
+	aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg);
+
+	return 0;
+}
+
+static int aic26_set_sysclk(struct snd_soc_dai *codec_dai,
+			    int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct aic26 *aic26 = codec->private_data;
+
+	dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i,"
+		" freq=%i, dir=%i)\n",
+		codec_dai, clk_id, freq, dir);
+
+	/* MCLK needs to fall between 2MHz and 50 MHz */
+	if ((freq < 2000000) || (freq > 50000000))
+		return -EINVAL;
+
+	aic26->mclk = freq;
+	return 0;
+}
+
+static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct aic26 *aic26 = codec->private_data;
+
+	dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n",
+		codec_dai, fmt);
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break;
+	case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break;
+	default:
+		dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:     aic26->datfm = AIC26_DATFM_I2S; break;
+	case SND_SOC_DAIFMT_DSP_A:   aic26->datfm = AIC26_DATFM_DSP; break;
+	case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break;
+	case SND_SOC_DAIFMT_LEFT_J:  aic26->datfm = AIC26_DATFM_LEFTJ; break;
+	default:
+		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * Digital Audio Interface Definition
+ */
+#define AIC26_RATES	(SNDRV_PCM_RATE_8000  | SNDRV_PCM_RATE_11025 |\
+			 SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+			 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+			 SNDRV_PCM_RATE_48000)
+#define AIC26_FORMATS	(SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_S16_BE |\
+			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
+
+struct snd_soc_dai aic26_dai = {
+	.name = "tlv320aic26",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = AIC26_RATES,
+		.formats = AIC26_FORMATS,
+	},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = AIC26_RATES,
+		.formats = AIC26_FORMATS,
+	},
+	.ops = {
+		.hw_params = aic26_hw_params,
+	},
+	.dai_ops = {
+		.digital_mute = aic26_mute,
+		.set_sysclk = aic26_set_sysclk,
+		.set_fmt = aic26_set_fmt,
+	},
+};
+EXPORT_SYMBOL_GPL(aic26_dai);
+
+/* ---------------------------------------------------------------------
+ * ALSA controls
+ */
+static const char *aic26_capture_src_text[] = {"Mic", "Aux"};
+static const struct soc_enum aic26_capture_src_enum =
+	SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text);
+
+static const struct snd_kcontrol_new aic26_snd_controls[] = {
+	/* Output */
+	SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1),
+	SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1),
+	SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0),
+	SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1),
+	SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0),
+	SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0),
+	SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0),
+	SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0),
+	SOC_ENUM("Capture Source", aic26_capture_src_enum),
+};
+
+/* ---------------------------------------------------------------------
+ * SoC CODEC portion of driver: probe and release routines
+ */
+static int aic26_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	struct snd_kcontrol *kcontrol;
+	struct aic26 *aic26;
+	int i, ret, err;
+
+	dev_info(&pdev->dev, "Probing AIC26 SoC CODEC driver\n");
+	dev_dbg(&pdev->dev, "socdev=%p\n", socdev);
+	dev_dbg(&pdev->dev, "codec_data=%p\n", socdev->codec_data);
+
+	/* Fetch the relevant aic26 private data here (it's already been
+	 * stored in the .codec pointer) */
+	aic26 = socdev->codec_data;
+	if (aic26 == NULL) {
+		dev_err(&pdev->dev, "aic26: missing codec pointer\n");
+		return -ENODEV;
+	}
+	codec = &aic26->codec;
+	socdev->codec = codec;
+
+	dev_dbg(&pdev->dev, "Registering PCMs, dev=%p, socdev->dev=%p\n",
+		&pdev->dev, socdev->dev);
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "aic26: failed to create pcms\n");
+		return -ENODEV;
+	}
+
+	/* register controls */
+	dev_dbg(&pdev->dev, "Registering controls\n");
+	for (i = 0; i < ARRAY_SIZE(aic26_snd_controls); i++) {
+		kcontrol = snd_soc_cnew(&aic26_snd_controls[i], codec, NULL);
+		err = snd_ctl_add(codec->card, kcontrol);
+		WARN_ON(err < 0);
+	}
+
+	/* CODEC is setup, we can register the card now */
+	dev_dbg(&pdev->dev, "Registering card\n");
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "aic26: failed to register card\n");
+		goto card_err;
+	}
+	return 0;
+
+ card_err:
+	snd_soc_free_pcms(socdev);
+	return ret;
+}
+
+static int aic26_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	snd_soc_free_pcms(socdev);
+	return 0;
+}
+
+struct snd_soc_codec_device aic26_soc_codec_dev = {
+	.probe = aic26_probe,
+	.remove = aic26_remove,
+};
+EXPORT_SYMBOL_GPL(aic26_soc_codec_dev);
+
+/* ---------------------------------------------------------------------
+ * SPI device portion of driver: sysfs files for debugging
+ */
+
+static ssize_t aic26_keyclick_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct aic26 *aic26 = dev_get_drvdata(dev);
+	int val, amp, freq, len;
+
+	val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
+	amp = (val >> 12) & 0x7;
+	freq = (125 << ((val >> 8) & 0x7)) >> 1;
+	len = 2 * (1 + ((val >> 4) & 0xf));
+
+	return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len);
+}
+
+/* Any write to the keyclick attribute will trigger the keyclick event */
+static ssize_t aic26_keyclick_set(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct aic26 *aic26 = dev_get_drvdata(dev);
+	int val;
+
+	val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
+	val |= 0x8000;
+	aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
+
+	return count;
+}
+
+static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set);
+
+/* ---------------------------------------------------------------------
+ * SPI device portion of driver: probe and release routines and SPI
+ * 				 driver registration.
+ */
+static int aic26_spi_probe(struct spi_device *spi)
+{
+	struct aic26 *aic26;
+	int rc, i, reg;
+
+	dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
+
+	/* Allocate driver data */
+	aic26 = kzalloc(sizeof *aic26, GFP_KERNEL);
+	if (!aic26)
+		return -ENOMEM;
+
+	/* Initialize the driver data */
+	aic26->spi = spi;
+	dev_set_drvdata(&spi->dev, aic26);
+
+	/* Setup what we can in the codec structure so that the register
+	 * access functions will work as expected.  More will be filled
+	 * out when it is probed by the SoC CODEC part of this driver */
+	aic26->codec.private_data = aic26;
+	aic26->codec.name = "aic26";
+	aic26->codec.owner = THIS_MODULE;
+	aic26->codec.dai = &aic26_dai;
+	aic26->codec.num_dai = 1;
+	aic26->codec.read = aic26_reg_read;
+	aic26->codec.write = aic26_reg_write;
+	aic26->master = 1;
+	mutex_init(&aic26->codec.mutex);
+	INIT_LIST_HEAD(&aic26->codec.dapm_widgets);
+	INIT_LIST_HEAD(&aic26->codec.dapm_paths);
+	aic26->codec.reg_cache_size = AIC26_NUM_REGS;
+	aic26->codec.reg_cache = aic26->reg_cache;
+
+	/* Reset the codec to power on defaults */
+	aic26_reg_write(&aic26->codec, AIC26_REG_RESET, 0xBB00);
+
+	/* Power up CODEC */
+	aic26_reg_write(&aic26->codec, AIC26_REG_POWER_CTRL, 0);
+
+	/* Audio Control 3 (master mode, fsref rate) */
+	reg = aic26_reg_read(&aic26->codec, AIC26_REG_AUDIO_CTRL3);
+	reg &= ~0xf800;
+	reg |= 0x0800; /* set master mode */
+	aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL3, reg);
+
+	/* Fill register cache */
+	for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++)
+		aic26_reg_read(&aic26->codec, i);
+
+	/* Register the sysfs files for debugging */
+	/* Create SysFS files */
+	rc = device_create_file(&spi->dev, &dev_attr_keyclick);
+	if (rc)
+		dev_info(&spi->dev, "error creating sysfs files\n");
+
+#if defined(CONFIG_SND_SOC_OF_SIMPLE)
+	/* Tell the of_soc helper about this codec */
+	of_snd_soc_register_codec(&aic26_soc_codec_dev, aic26, &aic26_dai,
+				  spi->dev.archdata.of_node);
+#endif
+
+	dev_dbg(&spi->dev, "SPI device initialized\n");
+	return 0;
+}
+
+static int aic26_spi_remove(struct spi_device *spi)
+{
+	struct aic26 *aic26 = dev_get_drvdata(&spi->dev);
+
+	kfree(aic26);
+
+	return 0;
+}
+
+static struct spi_driver aic26_spi = {
+	.driver = {
+		.name = "tlv320aic26",
+		.owner = THIS_MODULE,
+	},
+	.probe = aic26_spi_probe,
+	.remove = aic26_spi_remove,
+};
+
+static int __init aic26_init(void)
+{
+	return spi_register_driver(&aic26_spi);
+}
+module_init(aic26_init);
+
+static void __exit aic26_exit(void)
+{
+	spi_unregister_driver(&aic26_spi);
+}
+module_exit(aic26_exit);
diff --git a/sound/soc/codecs/tlv320aic26.h b/sound/soc/codecs/tlv320aic26.h
new file mode 100644
index 0000000..786ba16
--- /dev/null
+++ b/sound/soc/codecs/tlv320aic26.h
@@ -0,0 +1,96 @@
+/*
+ * Texas Instruments TLV320AIC26 low power audio CODEC
+ * register definitions
+ *
+ * Copyright (C) 2008 Secret Lab Technologies Ltd.
+ */
+
+#ifndef _TLV320AIC16_H_
+#define _TLV320AIC16_H_
+
+/* AIC26 Registers */
+#define AIC26_READ_COMMAND_WORD(addr)	((1 << 15) | (addr << 5))
+#define AIC26_WRITE_COMMAND_WORD(addr)	((0 << 15) | (addr << 5))
+#define AIC26_PAGE_ADDR(page, offset)	((page << 6) | offset)
+#define AIC26_NUM_REGS			AIC26_PAGE_ADDR(3, 0)
+
+/* Page 0: Auxillary data registers */
+#define AIC26_REG_BAT1			AIC26_PAGE_ADDR(0, 0x05)
+#define AIC26_REG_BAT2			AIC26_PAGE_ADDR(0, 0x06)
+#define AIC26_REG_AUX			AIC26_PAGE_ADDR(0, 0x07)
+#define AIC26_REG_TEMP1			AIC26_PAGE_ADDR(0, 0x09)
+#define AIC26_REG_TEMP2			AIC26_PAGE_ADDR(0, 0x0A)
+
+/* Page 1: Auxillary control registers */
+#define AIC26_REG_AUX_ADC		AIC26_PAGE_ADDR(1, 0x00)
+#define AIC26_REG_STATUS		AIC26_PAGE_ADDR(1, 0x01)
+#define AIC26_REG_REFERENCE		AIC26_PAGE_ADDR(1, 0x03)
+#define AIC26_REG_RESET			AIC26_PAGE_ADDR(1, 0x04)
+
+/* Page 2: Audio control registers */
+#define AIC26_REG_AUDIO_CTRL1		AIC26_PAGE_ADDR(2, 0x00)
+#define AIC26_REG_ADC_GAIN		AIC26_PAGE_ADDR(2, 0x01)
+#define AIC26_REG_DAC_GAIN		AIC26_PAGE_ADDR(2, 0x02)
+#define AIC26_REG_SIDETONE		AIC26_PAGE_ADDR(2, 0x03)
+#define AIC26_REG_AUDIO_CTRL2		AIC26_PAGE_ADDR(2, 0x04)
+#define AIC26_REG_POWER_CTRL		AIC26_PAGE_ADDR(2, 0x05)
+#define AIC26_REG_AUDIO_CTRL3		AIC26_PAGE_ADDR(2, 0x06)
+
+#define AIC26_REG_FILTER_COEFF_L_N0	AIC26_PAGE_ADDR(2, 0x07)
+#define AIC26_REG_FILTER_COEFF_L_N1	AIC26_PAGE_ADDR(2, 0x08)
+#define AIC26_REG_FILTER_COEFF_L_N2	AIC26_PAGE_ADDR(2, 0x09)
+#define AIC26_REG_FILTER_COEFF_L_N3	AIC26_PAGE_ADDR(2, 0x0A)
+#define AIC26_REG_FILTER_COEFF_L_N4	AIC26_PAGE_ADDR(2, 0x0B)
+#define AIC26_REG_FILTER_COEFF_L_N5	AIC26_PAGE_ADDR(2, 0x0C)
+#define AIC26_REG_FILTER_COEFF_L_D1	AIC26_PAGE_ADDR(2, 0x0D)
+#define AIC26_REG_FILTER_COEFF_L_D2	AIC26_PAGE_ADDR(2, 0x0E)
+#define AIC26_REG_FILTER_COEFF_L_D4	AIC26_PAGE_ADDR(2, 0x0F)
+#define AIC26_REG_FILTER_COEFF_L_D5	AIC26_PAGE_ADDR(2, 0x10)
+#define AIC26_REG_FILTER_COEFF_R_N0	AIC26_PAGE_ADDR(2, 0x11)
+#define AIC26_REG_FILTER_COEFF_R_N1	AIC26_PAGE_ADDR(2, 0x12)
+#define AIC26_REG_FILTER_COEFF_R_N2	AIC26_PAGE_ADDR(2, 0x13)
+#define AIC26_REG_FILTER_COEFF_R_N3	AIC26_PAGE_ADDR(2, 0x14)
+#define AIC26_REG_FILTER_COEFF_R_N4	AIC26_PAGE_ADDR(2, 0x15)
+#define AIC26_REG_FILTER_COEFF_R_N5	AIC26_PAGE_ADDR(2, 0x16)
+#define AIC26_REG_FILTER_COEFF_R_D1	AIC26_PAGE_ADDR(2, 0x17)
+#define AIC26_REG_FILTER_COEFF_R_D2	AIC26_PAGE_ADDR(2, 0x18)
+#define AIC26_REG_FILTER_COEFF_R_D4	AIC26_PAGE_ADDR(2, 0x19)
+#define AIC26_REG_FILTER_COEFF_R_D5	AIC26_PAGE_ADDR(2, 0x1A)
+
+#define AIC26_REG_PLL_PROG1		AIC26_PAGE_ADDR(2, 0x1B)
+#define AIC26_REG_PLL_PROG2		AIC26_PAGE_ADDR(2, 0x1C)
+#define AIC26_REG_AUDIO_CTRL4		AIC26_PAGE_ADDR(2, 0x1D)
+#define AIC26_REG_AUDIO_CTRL5		AIC26_PAGE_ADDR(2, 0x1E)
+
+/* fsref dividers; used in register 'Audio Control 1' */
+enum aic26_divisors {
+	AIC26_DIV_1	= 0,
+	AIC26_DIV_1_5	= 1,
+	AIC26_DIV_2	= 2,
+	AIC26_DIV_3	= 3,
+	AIC26_DIV_4	= 4,
+	AIC26_DIV_5	= 5,
+	AIC26_DIV_5_5	= 6,
+	AIC26_DIV_6	= 7,
+};
+
+/* Digital data format */
+enum aic26_datfm {
+	AIC26_DATFM_I2S		= 0 << 8,
+	AIC26_DATFM_DSP		= 1 << 8,
+	AIC26_DATFM_RIGHTJ	= 2 << 8, /* right justified */
+	AIC26_DATFM_LEFTJ	= 3 << 8, /* left justified */
+};
+
+/* Sample word length in bits; used in register 'Audio Control 1' */
+enum aic26_wlen {
+	AIC26_WLEN_16	= 0 << 10,
+	AIC26_WLEN_20	= 1 << 10,
+	AIC26_WLEN_24	= 2 << 10,
+	AIC26_WLEN_32	= 3 << 10,
+};
+
+extern struct snd_soc_dai aic26_dai;
+extern struct snd_soc_codec_device aic26_soc_codec_dev;
+
+#endif /* _TLV320AIC16_H_ */
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 5f9abb1..566a427 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1,7 +1,7 @@
 /*
  * ALSA SoC TLV320AIC3X codec driver
  *
- * Author:      Vladimir Barinov, <vbarinov@ru.mvista.com>
+ * Author:      Vladimir Barinov, <vbarinov@embeddedalley.com>
  * Copyright:   (C) 2007 MontaVista Software, Inc., <source@mvista.com>
  *
  * Based on sound/soc/codecs/wm8753.c by Liam Girdwood
@@ -1172,71 +1172,39 @@ static struct snd_soc_device *aic3x_socdev;
  * AIC3X 2 wire address can be up to 4 devices with device addresses
  * 0x18, 0x19, 0x1A, 0x1B
  */
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver aic3x_i2c_driver;
-static struct i2c_client client_template;
 
 /*
  * If the i2c layer weren't so broken, we could pass this kind of data
  * around
  */
-static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int aic3x_i2c_probe(struct i2c_client *i2c,
+			   const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = aic3x_socdev;
-	struct aic3x_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		printk(KERN_ERR "aic3x: failed to attach codec at addr %x\n",
-		       addr);
-		goto err;
-	}
-
 	ret = aic3x_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		printk(KERN_ERR "aic3x: failed to initialise AIC3X\n");
-		goto err;
-	}
-	return ret;
-
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int aic3x_i2c_detach(struct i2c_client *client)
+static int aic3x_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int aic3x_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, aic3x_codec_probe);
-}
+static const struct i2c_device_id aic3x_i2c_id[] = {
+	{ "tlv320aic3x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
 
 /* machine i2c codec control layer */
 static struct i2c_driver aic3x_i2c_driver = {
@@ -1244,13 +1212,9 @@ static struct i2c_driver aic3x_i2c_driver = {
 		.name = "aic3x I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.attach_adapter = aic3x_i2c_attach,
-	.detach_client = aic3x_i2c_detach,
-};
-
-static struct i2c_client client_template = {
-	.name = "AIC3X",
-	.driver = &aic3x_i2c_driver,
+	.probe = aic3x_i2c_probe,
+	.remove = aic3x_i2c_remove,
+	.id_table = aic3x_i2c_id,
 };
 
 static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)
@@ -1258,6 +1222,46 @@ static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)
 	value[0] = i2c_smbus_read_byte_data(client, value[0]);
 	return (len == 1);
 }
+
+static int aic3x_add_i2c_device(struct platform_device *pdev,
+				 const struct aic3x_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&aic3x_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "tlv320aic3x", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&aic3x_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int aic3x_probe(struct platform_device *pdev)
@@ -1290,12 +1294,9 @@ static int aic3x_probe(struct platform_device *pdev)
 	aic3x_socdev = socdev;
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t) i2c_master_send;
 		codec->hw_read = (hw_read_t) aic3x_i2c_read;
-		ret = i2c_add_driver(&aic3x_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = aic3x_add_i2c_device(pdev, setup);
 	}
 #else
 	/* Add other interfaces here */
@@ -1320,6 +1321,7 @@ static int aic3x_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&aic3x_i2c_driver);
 #endif
 	kfree(codec->private_data);
diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h
index d76c079..00a195a 100644
--- a/sound/soc/codecs/tlv320aic3x.h
+++ b/sound/soc/codecs/tlv320aic3x.h
@@ -1,7 +1,7 @@
 /*
  * ALSA SoC TLV320AIC3X codec driver
  *
- * Author:      Vladimir Barinov, <vbarinov@ru.mvista.com>
+ * Author:      Vladimir Barinov, <vbarinov@embeddedalley.com>
  * Copyright:   (C) 2007 MontaVista Software, Inc., <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -224,6 +224,7 @@ int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio);
 int aic3x_headset_detected(struct snd_soc_codec *codec);
 
 struct aic3x_setup_data {
+	int i2c_bus;
 	unsigned short i2c_address;
 	unsigned int gpio_func[2];
 };
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index 807318f..d206d7f 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -701,87 +701,86 @@ static struct snd_soc_device *uda1380_socdev;
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
-#define I2C_DRIVERID_UDA1380 0xfefe /* liam -  need a proper id */
-
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver uda1380_i2c_driver;
-static struct i2c_client client_template;
-
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-
-static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int uda1380_i2c_probe(struct i2c_client *i2c,
+			     const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = uda1380_socdev;
 	struct uda1380_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		pr_err("uda1380: failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = uda1380_init(socdev, setup->dac_clk);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("uda1380: failed to initialise UDA1380\n");
-		goto err;
-	}
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int uda1380_i2c_detach(struct i2c_client *client)
+static int uda1380_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int uda1380_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, uda1380_codec_probe);
-}
+static const struct i2c_device_id uda1380_i2c_id[] = {
+	{ "uda1380", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, uda1380_i2c_id);
 
 static struct i2c_driver uda1380_i2c_driver = {
 	.driver = {
 		.name =  "UDA1380 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_UDA1380,
-	.attach_adapter = uda1380_i2c_attach,
-	.detach_client =  uda1380_i2c_detach,
-	.command =        NULL,
+	.probe =    uda1380_i2c_probe,
+	.remove =   uda1380_i2c_remove,
+	.id_table = uda1380_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "UDA1380",
-	.driver = &uda1380_i2c_driver,
-};
+static int uda1380_add_i2c_device(struct platform_device *pdev,
+				  const struct uda1380_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&uda1380_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "uda1380", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&uda1380_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int uda1380_probe(struct platform_device *pdev)
@@ -789,7 +788,7 @@ static int uda1380_probe(struct platform_device *pdev)
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct uda1380_setup_data *setup;
 	struct snd_soc_codec *codec;
-	int ret = 0;
+	int ret;
 
 	pr_info("UDA1380 Audio Codec %s", UDA1380_VERSION);
 
@@ -804,16 +803,13 @@ static int uda1380_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&codec->dapm_paths);
 
 	uda1380_socdev = socdev;
+	ret = -ENODEV;
+
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
-		ret = i2c_add_driver(&uda1380_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = uda1380_add_i2c_device(pdev, setup);
 	}
-#else
-	/* Add other interfaces here */
 #endif
 
 	if (ret != 0)
@@ -833,6 +829,7 @@ static int uda1380_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&uda1380_i2c_driver);
 #endif
 	kfree(codec);
diff --git a/sound/soc/codecs/uda1380.h b/sound/soc/codecs/uda1380.h
index 50c603e..c55c17a 100644
--- a/sound/soc/codecs/uda1380.h
+++ b/sound/soc/codecs/uda1380.h
@@ -73,6 +73,7 @@
 #define R23_AGC_EN	0x0001
 
 struct uda1380_setup_data {
+	int            i2c_bus;
 	unsigned short i2c_address;
 	int            dac_clk;
 #define UDA1380_DAC_CLK_SYSCLK 0
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 3d998e6..9a37c8d 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -199,7 +199,7 @@ SOC_DAPM_SINGLE("PCM Playback Switch", WM8510_MONOMIX, 0, 1, 0),
 };
 
 static const struct snd_kcontrol_new wm8510_boost_controls[] = {
-SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA,  6, 1, 0),
+SOC_DAPM_SINGLE("Mic PGA Switch", WM8510_INPPGA,  6, 1, 1),
 SOC_DAPM_SINGLE("Aux Volume", WM8510_ADCBOOST, 0, 7, 0),
 SOC_DAPM_SINGLE("Mic Volume", WM8510_ADCBOOST, 4, 7, 0),
 };
@@ -665,88 +665,86 @@ static struct snd_soc_device *wm8510_socdev;
 /*
  * WM8510 2 wire address is 0x1a
  */
-#define I2C_DRIVERID_WM8510 0xfefe /* liam -  need a proper id */
 
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver wm8510_i2c_driver;
-static struct i2c_client client_template;
-
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-
-static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int wm8510_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = wm8510_socdev;
-	struct wm8510_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		pr_err("failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = wm8510_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("failed to initialise WM8510\n");
-		goto err;
-	}
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int wm8510_i2c_detach(struct i2c_client *client)
+static int wm8510_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int wm8510_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, wm8510_codec_probe);
-}
+static const struct i2c_device_id wm8510_i2c_id[] = {
+	{ "wm8510", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id);
 
-/* corgi i2c codec control layer */
 static struct i2c_driver wm8510_i2c_driver = {
 	.driver = {
 		.name = "WM8510 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_WM8510,
-	.attach_adapter = wm8510_i2c_attach,
-	.detach_client =  wm8510_i2c_detach,
-	.command =        NULL,
+	.probe =    wm8510_i2c_probe,
+	.remove =   wm8510_i2c_remove,
+	.id_table = wm8510_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "WM8510",
-	.driver = &wm8510_i2c_driver,
-};
+static int wm8510_add_i2c_device(struct platform_device *pdev,
+				 const struct wm8510_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&wm8510_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "wm8510", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&wm8510_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int wm8510_probe(struct platform_device *pdev)
@@ -771,11 +769,8 @@ static int wm8510_probe(struct platform_device *pdev)
 	wm8510_socdev = socdev;
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
-		ret = i2c_add_driver(&wm8510_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = wm8510_add_i2c_device(pdev, setup);
 	}
 #else
 	/* Add other interfaces here */
@@ -798,6 +793,7 @@ static int wm8510_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8510_i2c_driver);
 #endif
 	kfree(codec);
diff --git a/sound/soc/codecs/wm8510.h b/sound/soc/codecs/wm8510.h
index f5d2e42..c536839 100644
--- a/sound/soc/codecs/wm8510.h
+++ b/sound/soc/codecs/wm8510.h
@@ -94,6 +94,7 @@
 #define WM8510_MCLKDIV_12	(7 << 5)
 
 struct wm8510_setup_data {
+	int i2c_bus;
 	unsigned short i2c_address;
 };
 
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
new file mode 100644
index 0000000..df1ffbe
--- /dev/null
+++ b/sound/soc/codecs/wm8580.c
@@ -0,0 +1,1055 @@
+/*
+ * wm8580.c  --  WM8580 ALSA Soc Audio driver
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *  The WM8580 is a multichannel codec with S/PDIF support, featuring six
+ *  DAC channels and two ADC channels.
+ *
+ *  Currently only the primary audio interface is supported - S/PDIF and
+ *  the secondary audio interfaces are not.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+#include <sound/initval.h>
+#include <asm/div64.h>
+
+#include "wm8580.h"
+
+#define AUDIO_NAME "wm8580"
+#define WM8580_VERSION "0.1"
+
+struct pll_state {
+	unsigned int in;
+	unsigned int out;
+};
+
+/* codec private data */
+struct wm8580_priv {
+	struct pll_state a;
+	struct pll_state b;
+};
+
+/* WM8580 register space */
+#define WM8580_PLLA1                         0x00
+#define WM8580_PLLA2                         0x01
+#define WM8580_PLLA3                         0x02
+#define WM8580_PLLA4                         0x03
+#define WM8580_PLLB1                         0x04
+#define WM8580_PLLB2                         0x05
+#define WM8580_PLLB3                         0x06
+#define WM8580_PLLB4                         0x07
+#define WM8580_CLKSEL                        0x08
+#define WM8580_PAIF1                         0x09
+#define WM8580_PAIF2                         0x0A
+#define WM8580_SAIF1                         0x0B
+#define WM8580_PAIF3                         0x0C
+#define WM8580_PAIF4                         0x0D
+#define WM8580_SAIF2                         0x0E
+#define WM8580_DAC_CONTROL1                  0x0F
+#define WM8580_DAC_CONTROL2                  0x10
+#define WM8580_DAC_CONTROL3                  0x11
+#define WM8580_DAC_CONTROL4                  0x12
+#define WM8580_DAC_CONTROL5                  0x13
+#define WM8580_DIGITAL_ATTENUATION_DACL1     0x14
+#define WM8580_DIGITAL_ATTENUATION_DACR1     0x15
+#define WM8580_DIGITAL_ATTENUATION_DACL2     0x16
+#define WM8580_DIGITAL_ATTENUATION_DACR2     0x17
+#define WM8580_DIGITAL_ATTENUATION_DACL3     0x18
+#define WM8580_DIGITAL_ATTENUATION_DACR3     0x19
+#define WM8580_MASTER_DIGITAL_ATTENUATION    0x1C
+#define WM8580_ADC_CONTROL1                  0x1D
+#define WM8580_SPDTXCHAN0                    0x1E
+#define WM8580_SPDTXCHAN1                    0x1F
+#define WM8580_SPDTXCHAN2                    0x20
+#define WM8580_SPDTXCHAN3                    0x21
+#define WM8580_SPDTXCHAN4                    0x22
+#define WM8580_SPDTXCHAN5                    0x23
+#define WM8580_SPDMODE                       0x24
+#define WM8580_INTMASK                       0x25
+#define WM8580_GPO1                          0x26
+#define WM8580_GPO2                          0x27
+#define WM8580_GPO3                          0x28
+#define WM8580_GPO4                          0x29
+#define WM8580_GPO5                          0x2A
+#define WM8580_INTSTAT                       0x2B
+#define WM8580_SPDRXCHAN1                    0x2C
+#define WM8580_SPDRXCHAN2                    0x2D
+#define WM8580_SPDRXCHAN3                    0x2E
+#define WM8580_SPDRXCHAN4                    0x2F
+#define WM8580_SPDRXCHAN5                    0x30
+#define WM8580_SPDSTAT                       0x31
+#define WM8580_PWRDN1                        0x32
+#define WM8580_PWRDN2                        0x33
+#define WM8580_READBACK                      0x34
+#define WM8580_RESET                         0x35
+
+/* PLLB4 (register 7h) */
+#define WM8580_PLLB4_MCLKOUTSRC_MASK   0x60
+#define WM8580_PLLB4_MCLKOUTSRC_PLLA   0x20
+#define WM8580_PLLB4_MCLKOUTSRC_PLLB   0x40
+#define WM8580_PLLB4_MCLKOUTSRC_OSC    0x60
+
+#define WM8580_PLLB4_CLKOUTSRC_MASK    0x180
+#define WM8580_PLLB4_CLKOUTSRC_PLLACLK 0x080
+#define WM8580_PLLB4_CLKOUTSRC_PLLBCLK 0x100
+#define WM8580_PLLB4_CLKOUTSRC_OSCCLK  0x180
+
+/* CLKSEL (register 8h) */
+#define WM8580_CLKSEL_DAC_CLKSEL_MASK 0x03
+#define WM8580_CLKSEL_DAC_CLKSEL_PLLA 0x01
+#define WM8580_CLKSEL_DAC_CLKSEL_PLLB 0x02
+
+/* AIF control 1 (registers 9h-bh) */
+#define WM8580_AIF_RATE_MASK       0x7
+#define WM8580_AIF_RATE_128        0x0
+#define WM8580_AIF_RATE_192        0x1
+#define WM8580_AIF_RATE_256        0x2
+#define WM8580_AIF_RATE_384        0x3
+#define WM8580_AIF_RATE_512        0x4
+#define WM8580_AIF_RATE_768        0x5
+#define WM8580_AIF_RATE_1152       0x6
+
+#define WM8580_AIF_BCLKSEL_MASK   0x18
+#define WM8580_AIF_BCLKSEL_64     0x00
+#define WM8580_AIF_BCLKSEL_128    0x08
+#define WM8580_AIF_BCLKSEL_256    0x10
+#define WM8580_AIF_BCLKSEL_SYSCLK 0x18
+
+#define WM8580_AIF_MS             0x20
+
+#define WM8580_AIF_CLKSRC_MASK    0xc0
+#define WM8580_AIF_CLKSRC_PLLA    0x40
+#define WM8580_AIF_CLKSRC_PLLB    0x40
+#define WM8580_AIF_CLKSRC_MCLK    0xc0
+
+/* AIF control 2 (registers ch-eh) */
+#define WM8580_AIF_FMT_MASK    0x03
+#define WM8580_AIF_FMT_RIGHTJ  0x00
+#define WM8580_AIF_FMT_LEFTJ   0x01
+#define WM8580_AIF_FMT_I2S     0x02
+#define WM8580_AIF_FMT_DSP     0x03
+
+#define WM8580_AIF_LENGTH_MASK   0x0c
+#define WM8580_AIF_LENGTH_16     0x00
+#define WM8580_AIF_LENGTH_20     0x04
+#define WM8580_AIF_LENGTH_24     0x08
+#define WM8580_AIF_LENGTH_32     0x0c
+
+#define WM8580_AIF_LRP         0x10
+#define WM8580_AIF_BCP         0x20
+
+/* Powerdown Register 1 (register 32h) */
+#define WM8580_PWRDN1_PWDN     0x001
+#define WM8580_PWRDN1_ALLDACPD 0x040
+
+/* Powerdown Register 2 (register 33h) */
+#define WM8580_PWRDN2_OSSCPD   0x001
+#define WM8580_PWRDN2_PLLAPD   0x002
+#define WM8580_PWRDN2_PLLBPD   0x004
+#define WM8580_PWRDN2_SPDIFPD  0x008
+#define WM8580_PWRDN2_SPDIFTXD 0x010
+#define WM8580_PWRDN2_SPDIFRXD 0x020
+
+#define WM8580_DAC_CONTROL5_MUTEALL 0x10
+
+/*
+ * wm8580 register cache
+ * We can't read the WM8580 register space when we
+ * are using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8580_reg[] = {
+	0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
+	0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
+	0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/
+	0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
+	0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
+	0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
+	0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R27*/
+	0x01f0, 0x0040, 0x0000, 0x0000, /*R31(0x1F)*/
+	0x0000, 0x0000, 0x0031, 0x000b, /*R35*/
+	0x0039, 0x0000, 0x0010, 0x0032, /*R39*/
+	0x0054, 0x0076, 0x0098, 0x0000, /*R43(0x2B)*/
+	0x0000, 0x0000, 0x0000, 0x0000, /*R47*/
+	0x0000, 0x0000, 0x005e, 0x003e, /*R51(0x33)*/
+	0x0000, 0x0000 /*R53*/
+};
+
+/*
+ * read wm8580 register cache
+ */
+static inline unsigned int wm8580_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	BUG_ON(reg > ARRAY_SIZE(wm8580_reg));
+	return cache[reg];
+}
+
+/*
+ * write wm8580 register cache
+ */
+static inline void wm8580_write_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+
+	cache[reg] = value;
+}
+
+/*
+ * write to the WM8580 register space
+ */
+static int wm8580_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	BUG_ON(reg > ARRAY_SIZE(wm8580_reg));
+
+	/* Registers are 9 bits wide */
+	value &= 0x1ff;
+
+	switch (reg) {
+	case WM8580_RESET:
+		/* Uncached */
+		break;
+	default:
+		if (value == wm8580_read_reg_cache(codec, reg))
+			return 0;
+	}
+
+	/* data is
+	 *   D15..D9 WM8580 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8580_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+static inline unsigned int wm8580_read(struct snd_soc_codec *codec,
+				       unsigned int reg)
+{
+	switch (reg) {
+	default:
+		return wm8580_read_reg_cache(codec, reg);
+	}
+}
+
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+
+static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	int reg = kcontrol->private_value & 0xff;
+	int reg2 = (kcontrol->private_value >> 24) & 0xff;
+	int ret;
+	u16 val;
+
+	/* Clear the register cache so we write without VU set */
+	wm8580_write_reg_cache(codec, reg, 0);
+	wm8580_write_reg_cache(codec, reg2, 0);
+
+	ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+	if (ret < 0)
+		return ret;
+
+	/* Now write again with the volume update bit set */
+	val = wm8580_read_reg_cache(codec, reg);
+	wm8580_write(codec, reg, val | 0x0100);
+
+	val = wm8580_read_reg_cache(codec, reg2);
+	wm8580_write(codec, reg2, val | 0x0100);
+
+	return 0;
+}
+
+#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+	.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+		SNDRV_CTL_ELEM_ACCESS_READWRITE,  \
+	.tlv.p = (tlv_array), \
+	.info = snd_soc_info_volsw_2r, \
+	.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
+	.private_value = (reg_left) | ((shift) << 8)  |		\
+		((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+
+static const struct snd_kcontrol_new wm8580_snd_controls[] = {
+SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
+			    WM8580_DIGITAL_ATTENUATION_DACL1,
+			    WM8580_DIGITAL_ATTENUATION_DACR1,
+			    0, 0xff, 0, dac_tlv),
+SOC_WM8580_OUT_DOUBLE_R_TLV("DAC2 Playback Volume",
+			    WM8580_DIGITAL_ATTENUATION_DACL2,
+			    WM8580_DIGITAL_ATTENUATION_DACR2,
+			    0, 0xff, 0, dac_tlv),
+SOC_WM8580_OUT_DOUBLE_R_TLV("DAC3 Playback Volume",
+			    WM8580_DIGITAL_ATTENUATION_DACL3,
+			    WM8580_DIGITAL_ATTENUATION_DACR3,
+			    0, 0xff, 0, dac_tlv),
+
+SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
+SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
+SOC_SINGLE("DAC3 Deemphasis Switch", WM8580_DAC_CONTROL3, 2, 1, 0),
+
+SOC_DOUBLE("DAC1 Invert Switch", WM8580_DAC_CONTROL4,  0, 1, 1, 0),
+SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4,  2, 3, 1, 0),
+SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4,  4, 5, 1, 0),
+
+SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0),
+SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 0),
+SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 0),
+SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 0),
+
+SOC_DOUBLE("ADC Mute Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 0),
+SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
+};
+
+/* Add non-DAPM controls */
+static int wm8580_add_controls(struct snd_soc_codec *codec)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm8580_snd_controls); i++) {
+		err = snd_ctl_add(codec->card,
+				  snd_soc_cnew(&wm8580_snd_controls[i],
+					       codec, NULL));
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = {
+SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1),
+SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1),
+SND_SOC_DAPM_DAC("DAC3", "Playback", WM8580_PWRDN1, 4, 1),
+
+SND_SOC_DAPM_OUTPUT("VOUT1L"),
+SND_SOC_DAPM_OUTPUT("VOUT1R"),
+SND_SOC_DAPM_OUTPUT("VOUT2L"),
+SND_SOC_DAPM_OUTPUT("VOUT2R"),
+SND_SOC_DAPM_OUTPUT("VOUT3L"),
+SND_SOC_DAPM_OUTPUT("VOUT3R"),
+
+SND_SOC_DAPM_ADC("ADC", "Capture", WM8580_PWRDN1, 1, 1),
+
+SND_SOC_DAPM_INPUT("AINL"),
+SND_SOC_DAPM_INPUT("AINR"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{ "VOUT1L", NULL, "DAC1" },
+	{ "VOUT1R", NULL, "DAC1" },
+
+	{ "VOUT2L", NULL, "DAC2" },
+	{ "VOUT2R", NULL, "DAC2" },
+
+	{ "VOUT3L", NULL, "DAC3" },
+	{ "VOUT3R", NULL, "DAC3" },
+
+	{ "ADC", NULL, "AINL" },
+	{ "ADC", NULL, "AINR" },
+};
+
+static int wm8580_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets,
+				  ARRAY_SIZE(wm8580_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_new_widgets(codec);
+	return 0;
+}
+
+/* PLL divisors */
+struct _pll_div {
+	u32 prescale:1;
+	u32 postscale:1;
+	u32 freqmode:2;
+	u32 n:4;
+	u32 k:24;
+};
+
+/* The size in bits of the pll divide */
+#define FIXED_PLL_SIZE (1 << 22)
+
+/* PLL rate to output rate divisions */
+static struct {
+	unsigned int div;
+	unsigned int freqmode;
+	unsigned int postscale;
+} post_table[] = {
+	{  2,  0, 0 },
+	{  4,  0, 1 },
+	{  4,  1, 0 },
+	{  8,  1, 1 },
+	{  8,  2, 0 },
+	{ 16,  2, 1 },
+	{ 12,  3, 0 },
+	{ 24,  3, 1 }
+};
+
+static int pll_factors(struct _pll_div *pll_div, unsigned int target,
+		       unsigned int source)
+{
+	u64 Kpart;
+	unsigned int K, Ndiv, Nmod;
+	int i;
+
+	pr_debug("wm8580: PLL %dHz->%dHz\n", source, target);
+
+	/* Scale the output frequency up; the PLL should run in the
+	 * region of 90-100MHz.
+	 */
+	for (i = 0; i < ARRAY_SIZE(post_table); i++) {
+		if (target * post_table[i].div >=  90000000 &&
+		    target * post_table[i].div <= 100000000) {
+			pll_div->freqmode = post_table[i].freqmode;
+			pll_div->postscale = post_table[i].postscale;
+			target *= post_table[i].div;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(post_table)) {
+		printk(KERN_ERR "wm8580: Unable to scale output frequency "
+		       "%u\n", target);
+		return -EINVAL;
+	}
+
+	Ndiv = target / source;
+
+	if (Ndiv < 5) {
+		source /= 2;
+		pll_div->prescale = 1;
+		Ndiv = target / source;
+	} else
+		pll_div->prescale = 0;
+
+	if ((Ndiv < 5) || (Ndiv > 13)) {
+		printk(KERN_ERR
+			"WM8580 N=%d outside supported range\n", Ndiv);
+		return -EINVAL;
+	}
+
+	pll_div->n = Ndiv;
+	Nmod = target % source;
+	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, source);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	pll_div->k = K;
+
+	pr_debug("PLL %x.%x prescale %d freqmode %d postscale %d\n",
+		 pll_div->n, pll_div->k, pll_div->prescale, pll_div->freqmode,
+		 pll_div->postscale);
+
+	return 0;
+}
+
+static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	int offset;
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8580_priv *wm8580 = codec->private_data;
+	struct pll_state *state;
+	struct _pll_div pll_div;
+	unsigned int reg;
+	unsigned int pwr_mask;
+	int ret;
+
+	/* GCC isn't able to work out the ifs below for initialising/using
+	 * pll_div so suppress warnings.
+	 */
+	memset(&pll_div, 0, sizeof(pll_div));
+
+	switch (pll_id) {
+	case WM8580_PLLA:
+		state = &wm8580->a;
+		offset = 0;
+		pwr_mask = WM8580_PWRDN2_PLLAPD;
+		break;
+	case WM8580_PLLB:
+		state = &wm8580->b;
+		offset = 4;
+		pwr_mask = WM8580_PWRDN2_PLLBPD;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	if (freq_in && freq_out) {
+		ret = pll_factors(&pll_div, freq_out, freq_in);
+		if (ret != 0)
+			return ret;
+	}
+
+	state->in = freq_in;
+	state->out = freq_out;
+
+	/* Always disable the PLL - it is not safe to leave it running
+	 * while reprogramming it.
+	 */
+	reg = wm8580_read(codec, WM8580_PWRDN2);
+	wm8580_write(codec, WM8580_PWRDN2, reg | pwr_mask);
+
+	if (!freq_in || !freq_out)
+		return 0;
+
+	wm8580_write(codec, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
+	wm8580_write(codec, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0xff);
+	wm8580_write(codec, WM8580_PLLA3 + offset,
+		     (pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
+
+	reg = wm8580_read(codec, WM8580_PLLA4 + offset);
+	reg &= ~0x3f;
+	reg |= pll_div.prescale | pll_div.postscale << 1 |
+		pll_div.freqmode << 4;
+
+	wm8580_write(codec, WM8580_PLLA4 + offset, reg);
+
+	/* All done, turn it on */
+	reg = wm8580_read(codec, WM8580_PWRDN2);
+	wm8580_write(codec, WM8580_PWRDN2, reg & ~pwr_mask);
+
+	return 0;
+}
+
+/*
+ * Set PCM DAI bit size and sample rate.
+ */
+static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai_link *dai = rtd->dai;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->codec_dai->id);
+
+	paifb &= ~WM8580_AIF_LENGTH_MASK;
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		paifb |= WM8580_AIF_LENGTH_20;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		paifb |= WM8580_AIF_LENGTH_24;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		paifb |= WM8580_AIF_LENGTH_24;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8580_write(codec, WM8580_PAIF3 + dai->codec_dai->id, paifb);
+	return 0;
+}
+
+static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
+				      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int aifa;
+	unsigned int aifb;
+	int can_invert_lrclk;
+
+	aifa = wm8580_read(codec, WM8580_PAIF1 + codec_dai->id);
+	aifb = wm8580_read(codec, WM8580_PAIF3 + codec_dai->id);
+
+	aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		aifa &= ~WM8580_AIF_MS;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aifa |= WM8580_AIF_MS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		can_invert_lrclk = 1;
+		aifb |= WM8580_AIF_FMT_I2S;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		can_invert_lrclk = 1;
+		aifb |= WM8580_AIF_FMT_RIGHTJ;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		can_invert_lrclk = 1;
+		aifb |= WM8580_AIF_FMT_LEFTJ;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		can_invert_lrclk = 0;
+		aifb |= WM8580_AIF_FMT_DSP;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		can_invert_lrclk = 0;
+		aifb |= WM8580_AIF_FMT_DSP;
+		aifb |= WM8580_AIF_LRP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+
+	case SND_SOC_DAIFMT_IB_IF:
+		if (!can_invert_lrclk)
+			return -EINVAL;
+		aifb |= WM8580_AIF_BCP;
+		aifb |= WM8580_AIF_LRP;
+		break;
+
+	case SND_SOC_DAIFMT_IB_NF:
+		aifb |= WM8580_AIF_BCP;
+		break;
+
+	case SND_SOC_DAIFMT_NB_IF:
+		if (!can_invert_lrclk)
+			return -EINVAL;
+		aifb |= WM8580_AIF_LRP;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	wm8580_write(codec, WM8580_PAIF1 + codec_dai->id, aifa);
+	wm8580_write(codec, WM8580_PAIF3 + codec_dai->id, aifb);
+
+	return 0;
+}
+
+static int wm8580_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+				 int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int reg;
+
+	switch (div_id) {
+	case WM8580_MCLK:
+		reg = wm8580_read(codec, WM8580_PLLB4);
+		reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
+
+		switch (div) {
+		case WM8580_CLKSRC_MCLK:
+			/* Input */
+			break;
+
+		case WM8580_CLKSRC_PLLA:
+			reg |= WM8580_PLLB4_MCLKOUTSRC_PLLA;
+			break;
+		case WM8580_CLKSRC_PLLB:
+			reg |= WM8580_PLLB4_MCLKOUTSRC_PLLB;
+			break;
+
+		case WM8580_CLKSRC_OSC:
+			reg |= WM8580_PLLB4_MCLKOUTSRC_OSC;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+		wm8580_write(codec, WM8580_PLLB4, reg);
+		break;
+
+	case WM8580_DAC_CLKSEL:
+		reg = wm8580_read(codec, WM8580_CLKSEL);
+		reg &= ~WM8580_CLKSEL_DAC_CLKSEL_MASK;
+
+		switch (div) {
+		case WM8580_CLKSRC_MCLK:
+			break;
+
+		case WM8580_CLKSRC_PLLA:
+			reg |= WM8580_CLKSEL_DAC_CLKSEL_PLLA;
+			break;
+
+		case WM8580_CLKSRC_PLLB:
+			reg |= WM8580_CLKSEL_DAC_CLKSEL_PLLB;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+		wm8580_write(codec, WM8580_CLKSEL, reg);
+		break;
+
+	case WM8580_CLKOUTSRC:
+		reg = wm8580_read(codec, WM8580_PLLB4);
+		reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
+
+		switch (div) {
+		case WM8580_CLKSRC_NONE:
+			break;
+
+		case WM8580_CLKSRC_PLLA:
+			reg |= WM8580_PLLB4_CLKOUTSRC_PLLACLK;
+			break;
+
+		case WM8580_CLKSRC_PLLB:
+			reg |= WM8580_PLLB4_CLKOUTSRC_PLLBCLK;
+			break;
+
+		case WM8580_CLKSRC_OSC:
+			reg |= WM8580_PLLB4_CLKOUTSRC_OSCCLK;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+		wm8580_write(codec, WM8580_PLLB4, reg);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wm8580_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int reg;
+
+	reg = wm8580_read(codec, WM8580_DAC_CONTROL5);
+
+	if (mute)
+		reg |= WM8580_DAC_CONTROL5_MUTEALL;
+	else
+		reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
+
+	wm8580_write(codec, WM8580_DAC_CONTROL5, reg);
+
+	return 0;
+}
+
+static int wm8580_set_bias_level(struct snd_soc_codec *codec,
+	enum snd_soc_bias_level level)
+{
+	u16 reg;
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+	case SND_SOC_BIAS_STANDBY:
+		break;
+	case SND_SOC_BIAS_OFF:
+		reg = wm8580_read(codec, WM8580_PWRDN1);
+		wm8580_write(codec, WM8580_PWRDN1, reg | WM8580_PWRDN1_PWDN);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai wm8580_dai[] = {
+	{
+		.name = "WM8580 PAIFRX",
+		.id = 0,
+		.playback = {
+			.stream_name = "Playback",
+			.channels_min = 1,
+			.channels_max = 6,
+			.rates = SNDRV_PCM_RATE_8000_192000,
+			.formats = WM8580_FORMATS,
+		},
+		.ops = {
+			 .hw_params = wm8580_paif_hw_params,
+		 },
+		.dai_ops = {
+			 .set_fmt = wm8580_set_paif_dai_fmt,
+			 .set_clkdiv = wm8580_set_dai_clkdiv,
+			 .set_pll = wm8580_set_dai_pll,
+			 .digital_mute = wm8580_digital_mute,
+		 },
+	},
+	{
+		.name = "WM8580 PAIFTX",
+		.id = 1,
+		.capture = {
+			.stream_name = "Capture",
+			.channels_min = 2,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_8000_192000,
+			.formats = WM8580_FORMATS,
+		},
+		.ops = {
+			 .hw_params = wm8580_paif_hw_params,
+		 },
+		.dai_ops = {
+			 .set_fmt = wm8580_set_paif_dai_fmt,
+			 .set_clkdiv = wm8580_set_dai_clkdiv,
+			 .set_pll = wm8580_set_dai_pll,
+		 },
+	},
+};
+EXPORT_SYMBOL_GPL(wm8580_dai);
+
+/*
+ * initialise the WM8580 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int wm8580_init(struct snd_soc_device *socdev)
+{
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret = 0;
+
+	codec->name = "WM8580";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8580_read_reg_cache;
+	codec->write = wm8580_write;
+	codec->set_bias_level = wm8580_set_bias_level;
+	codec->dai = wm8580_dai;
+	codec->num_dai = ARRAY_SIZE(wm8580_dai);
+	codec->reg_cache_size = ARRAY_SIZE(wm8580_reg);
+	codec->reg_cache = kmemdup(wm8580_reg, sizeof(wm8580_reg),
+				   GFP_KERNEL);
+
+	if (codec->reg_cache == NULL)
+		return -ENOMEM;
+
+	/* Get the codec into a known state */
+	wm8580_write(codec, WM8580_RESET, 0);
+
+	/* Power up and get individual control of the DACs */
+	wm8580_write(codec, WM8580_PWRDN1, wm8580_read(codec, WM8580_PWRDN1) &
+		     ~(WM8580_PWRDN1_PWDN | WM8580_PWRDN1_ALLDACPD));
+
+	/* Make VMID high impedence */
+	wm8580_write(codec, WM8580_ADC_CONTROL1,
+		     wm8580_read(codec,  WM8580_ADC_CONTROL1) & ~0x100);
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1,
+			       SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8580: failed to create pcms\n");
+		goto pcm_err;
+	}
+
+	wm8580_add_controls(codec);
+	wm8580_add_widgets(codec);
+
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8580: failed to register card\n");
+		goto card_err;
+	}
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	kfree(codec->reg_cache);
+	return ret;
+}
+
+/* If the i2c layer weren't so broken, we could pass this kind of data
+   around */
+static struct snd_soc_device *wm8580_socdev;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+
+/*
+ * WM8580 2 wire address is determined by GPIO5
+ * state during powerup.
+ *    low  = 0x1a
+ *    high = 0x1b
+ */
+static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
+
+/* Magic definition of all other variables and things */
+I2C_CLIENT_INSMOD;
+
+static struct i2c_driver wm8580_i2c_driver;
+static struct i2c_client client_template;
+
+static int wm8580_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+	struct snd_soc_device *socdev = wm8580_socdev;
+	struct wm8580_setup_data *setup = socdev->codec_data;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct i2c_client *i2c;
+	int ret;
+
+	if (addr != setup->i2c_address)
+		return -ENODEV;
+
+	client_template.adapter = adap;
+	client_template.addr = addr;
+
+	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
+	if (i2c == NULL) {
+		kfree(codec);
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(i2c, codec);
+	codec->control_data = i2c;
+
+	ret = i2c_attach_client(i2c);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "failed to attach codec at addr %x\n", addr);
+		goto err;
+	}
+
+	ret = wm8580_init(socdev);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "failed to initialise WM8580\n");
+		goto err;
+	}
+
+	return ret;
+
+err:
+	kfree(codec);
+	kfree(i2c);
+	return ret;
+}
+
+static int wm8580_i2c_detach(struct i2c_client *client)
+{
+	struct snd_soc_codec *codec = i2c_get_clientdata(client);
+	i2c_detach_client(client);
+	kfree(codec->reg_cache);
+	kfree(client);
+	return 0;
+}
+
+static int wm8580_i2c_attach(struct i2c_adapter *adap)
+{
+	return i2c_probe(adap, &addr_data, wm8580_codec_probe);
+}
+
+/* corgi i2c codec control layer */
+static struct i2c_driver wm8580_i2c_driver = {
+	.driver = {
+		.name = "WM8580 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.attach_adapter = wm8580_i2c_attach,
+	.detach_client =  wm8580_i2c_detach,
+	.command =        NULL,
+};
+
+static struct i2c_client client_template = {
+	.name =   "WM8580",
+	.driver = &wm8580_i2c_driver,
+};
+#endif
+
+static int wm8580_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct wm8580_setup_data *setup;
+	struct snd_soc_codec *codec;
+	struct wm8580_priv *wm8580;
+	int ret = 0;
+
+	pr_info("WM8580 Audio Codec %s\n", WM8580_VERSION);
+
+	setup = socdev->codec_data;
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	wm8580 = kzalloc(sizeof(struct wm8580_priv), GFP_KERNEL);
+	if (wm8580 == NULL) {
+		kfree(codec);
+		return -ENOMEM;
+	}
+
+	codec->private_data = wm8580;
+	socdev->codec = codec;
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+	wm8580_socdev = socdev;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	if (setup->i2c_address) {
+		normal_i2c[0] = setup->i2c_address;
+		codec->hw_write = (hw_write_t)i2c_master_send;
+		ret = i2c_add_driver(&wm8580_i2c_driver);
+		if (ret != 0)
+			printk(KERN_ERR "can't add i2c driver");
+	}
+#else
+		/* Add other interfaces here */
+#endif
+	return ret;
+}
+
+/* power down chip */
+static int wm8580_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	if (codec->control_data)
+		wm8580_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8580_i2c_driver);
+#endif
+	kfree(codec->private_data);
+	kfree(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8580 = {
+	.probe = 	wm8580_probe,
+	.remove = 	wm8580_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8580);
+
+MODULE_DESCRIPTION("ASoC WM8580 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8580.h b/sound/soc/codecs/wm8580.h
new file mode 100644
index 0000000..589ddab
--- /dev/null
+++ b/sound/soc/codecs/wm8580.h
@@ -0,0 +1,42 @@
+/*
+ * wm8580.h  --  audio driver for WM8580
+ *
+ * Copyright 2008 Samsung Electronics.
+ * Author: Ryu Euiyoul
+ *         ryu.real@gmail.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef _WM8580_H
+#define _WM8580_H
+
+#define WM8580_PLLA  1
+#define WM8580_PLLB  2
+
+#define WM8580_MCLK       1
+#define WM8580_DAC_CLKSEL 2
+#define WM8580_CLKOUTSRC  3
+
+#define WM8580_CLKSRC_MCLK 1
+#define WM8580_CLKSRC_PLLA 2
+#define WM8580_CLKSRC_PLLB 3
+#define WM8580_CLKSRC_OSC  4
+#define WM8580_CLKSRC_NONE 5
+
+struct wm8580_setup_data {
+	unsigned short i2c_address;
+};
+
+#define WM8580_DAI_PAIFRX 0
+#define WM8580_DAI_PAIFTX 1
+
+extern struct snd_soc_dai wm8580_dai[];
+extern struct snd_soc_codec_device soc_codec_dev_wm8580;
+
+#endif
+
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 9402fca..7b64d9a 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -570,88 +571,144 @@ static struct snd_soc_device *wm8731_socdev;
  *    low  = 0x1a
  *    high = 0x1b
  */
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
 
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver wm8731_i2c_driver;
-static struct i2c_client client_template;
-
-/* If the i2c layer weren't so broken, we could pass this kind of data
-   around */
-
-static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int wm8731_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = wm8731_socdev;
-	struct wm8731_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		pr_err("failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = wm8731_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("failed to initialise WM8731\n");
-		goto err;
-	}
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int wm8731_i2c_detach(struct i2c_client *client)
+static int wm8731_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int wm8731_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, wm8731_codec_probe);
-}
+static const struct i2c_device_id wm8731_i2c_id[] = {
+	{ "wm8731", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8731_i2c_id);
 
-/* corgi i2c codec control layer */
 static struct i2c_driver wm8731_i2c_driver = {
 	.driver = {
 		.name = "WM8731 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_WM8731,
-	.attach_adapter = wm8731_i2c_attach,
-	.detach_client =  wm8731_i2c_detach,
-	.command =        NULL,
+	.probe =    wm8731_i2c_probe,
+	.remove =   wm8731_i2c_remove,
+	.id_table = wm8731_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "WM8731",
-	.driver = &wm8731_i2c_driver,
-};
+static int wm8731_add_i2c_device(struct platform_device *pdev,
+				 const struct wm8731_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&wm8731_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&wm8731_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8731_spi_probe(struct spi_device *spi)
+{
+	struct snd_soc_device *socdev = wm8731_socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret;
+
+	codec->control_data = spi;
+
+	ret = wm8731_init(socdev);
+	if (ret < 0)
+		dev_err(&spi->dev, "failed to initialise WM8731\n");
+
+	return ret;
+}
+
+static int __devexit wm8731_spi_remove(struct spi_device *spi)
+{
+	return 0;
+}
+
+static struct spi_driver wm8731_spi_driver = {
+	.driver = {
+		.name	= "wm8731",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm8731_spi_probe,
+	.remove		= __devexit_p(wm8731_spi_remove),
+};
+
+static int wm8731_spi_write(struct spi_device *spi, const char *data, int len)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	u8 msg[2];
+
+	if (len <= 0)
+		return 0;
+
+	msg[0] = data[0];
+	msg[1] = data[1];
+
+	spi_message_init(&m);
+	memset(&t, 0, (sizeof t));
+
+	t.tx_buf = &msg[0];
+	t.len = len;
+
+	spi_message_add_tail(&t, &m);
+	spi_sync(spi, &m);
+
+	return len;
+}
+#endif /* CONFIG_SPI_MASTER */
+
 static int wm8731_probe(struct platform_device *pdev)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
@@ -680,16 +737,21 @@ static int wm8731_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&codec->dapm_paths);
 
 	wm8731_socdev = socdev;
+	ret = -ENODEV;
+
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
-		ret = i2c_add_driver(&wm8731_i2c_driver);
+		ret = wm8731_add_i2c_device(pdev, setup);
+	}
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	if (setup->spi) {
+		codec->hw_write = (hw_write_t)wm8731_spi_write;
+		ret = spi_register_driver(&wm8731_spi_driver);
 		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+			printk(KERN_ERR "can't add spi driver");
 	}
-#else
-	/* Add other interfaces here */
 #endif
 
 	if (ret != 0) {
@@ -711,8 +773,12 @@ static int wm8731_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8731_i2c_driver);
 #endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8731_spi_driver);
+#endif
 	kfree(codec->private_data);
 	kfree(codec);
 
diff --git a/sound/soc/codecs/wm8731.h b/sound/soc/codecs/wm8731.h
index 99f2e3c..95190e9 100644
--- a/sound/soc/codecs/wm8731.h
+++ b/sound/soc/codecs/wm8731.h
@@ -35,6 +35,8 @@
 #define WM8731_DAI		0
 
 struct wm8731_setup_data {
+	int            spi;
+	int            i2c_bus;
 	unsigned short i2c_address;
 };
 
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index dd1f554..4892e39 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -841,88 +842,147 @@ static struct snd_soc_device *wm8750_socdev;
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 
 /*
- * WM8731 2 wire address is determined by GPIO5
+ * WM8750 2 wire address is determined by GPIO5
  * state during powerup.
  *    low  = 0x1a
  *    high = 0x1b
  */
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
 
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver wm8750_i2c_driver;
-static struct i2c_client client_template;
-
-static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int wm8750_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = wm8750_socdev;
-	struct wm8750_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		pr_err("failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = wm8750_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("failed to initialise WM8750\n");
-		goto err;
-	}
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int wm8750_i2c_detach(struct i2c_client *client)
+static int wm8750_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int wm8750_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, wm8750_codec_probe);
-}
+static const struct i2c_device_id wm8750_i2c_id[] = {
+	{ "wm8750", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8750_i2c_id);
 
-/* corgi i2c codec control layer */
 static struct i2c_driver wm8750_i2c_driver = {
 	.driver = {
 		.name = "WM8750 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_WM8750,
-	.attach_adapter = wm8750_i2c_attach,
-	.detach_client =  wm8750_i2c_detach,
-	.command =        NULL,
+	.probe =    wm8750_i2c_probe,
+	.remove =   wm8750_i2c_remove,
+	.id_table = wm8750_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "WM8750",
-	.driver = &wm8750_i2c_driver,
+static int wm8750_add_i2c_device(struct platform_device *pdev,
+				 const struct wm8750_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&wm8750_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "wm8750", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&wm8750_i2c_driver);
+	return -ENODEV;
+}
+#endif
+
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8750_spi_probe(struct spi_device *spi)
+{
+	struct snd_soc_device *socdev = wm8750_socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret;
+
+	codec->control_data = spi;
+
+	ret = wm8750_init(socdev);
+	if (ret < 0)
+		dev_err(&spi->dev, "failed to initialise WM8750\n");
+
+	return ret;
+}
+
+static int __devexit wm8750_spi_remove(struct spi_device *spi)
+{
+	return 0;
+}
+
+static struct spi_driver wm8750_spi_driver = {
+	.driver = {
+		.name	= "wm8750",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm8750_spi_probe,
+	.remove		= __devexit_p(wm8750_spi_remove),
 };
+
+static int wm8750_spi_write(struct spi_device *spi, const char *data, int len)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	u8 msg[2];
+
+	if (len <= 0)
+		return 0;
+
+	msg[0] = data[0];
+	msg[1] = data[1];
+
+	spi_message_init(&m);
+	memset(&t, 0, (sizeof t));
+
+	t.tx_buf = &msg[0];
+	t.len = len;
+
+	spi_message_add_tail(&t, &m);
+	spi_sync(spi, &m);
+
+	return len;
+}
 #endif
 
 static int wm8750_probe(struct platform_device *pdev)
@@ -931,7 +991,7 @@ static int wm8750_probe(struct platform_device *pdev)
 	struct wm8750_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec;
 	struct wm8750_priv *wm8750;
-	int ret = 0;
+	int ret;
 
 	pr_info("WM8750 Audio Codec %s", WM8750_VERSION);
 	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
@@ -952,16 +1012,21 @@ static int wm8750_probe(struct platform_device *pdev)
 	wm8750_socdev = socdev;
 	INIT_DELAYED_WORK(&codec->delayed_work, wm8750_work);
 
+	ret = -ENODEV;
+
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
-		ret = i2c_add_driver(&wm8750_i2c_driver);
+		ret = wm8750_add_i2c_device(pdev, setup);
+	}
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	if (setup->spi) {
+		codec->hw_write = (hw_write_t)wm8750_spi_write;
+		ret = spi_register_driver(&wm8750_spi_driver);
 		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+			printk(KERN_ERR "can't add spi driver");
 	}
-#else
-		/* Add other interfaces here */
 #endif
 
 	if (ret != 0) {
@@ -1002,8 +1067,12 @@ static int wm8750_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8750_i2c_driver);
 #endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8750_spi_driver);
+#endif
 	kfree(codec->private_data);
 	kfree(codec);
 
diff --git a/sound/soc/codecs/wm8750.h b/sound/soc/codecs/wm8750.h
index 8ef30e6..1dc100e 100644
--- a/sound/soc/codecs/wm8750.h
+++ b/sound/soc/codecs/wm8750.h
@@ -58,6 +58,8 @@
 #define WM8750_SYSCLK	0
 
 struct wm8750_setup_data {
+	int spi;
+	int i2c_bus;
 	unsigned short i2c_address;
 };
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 5761164..8c4df44 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -583,7 +583,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	/* out 4 */
 	{"Out4 Mux", "VREF", "VREF"},
-	{"Out4 Mux", "Capture ST", "Capture ST Mixer"},
+	{"Out4 Mux", "Capture ST", "Playback Mixer"},
 	{"Out4 Mux", "LOUT2", "LOUT2"},
 	{"Out 4", NULL, "Out4 Mux"},
 	{"OUT4", NULL, "Out 4"},
@@ -607,7 +607,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
 	/* Capture Right Mux */
 	{"Capture Right Mux", "PGA", "Right Capture Volume"},
 	{"Capture Right Mux", "Line or RXP-RXN", "Line Right Mux"},
-	{"Capture Right Mux", "Sidetone", "Capture ST Mixer"},
+	{"Capture Right Mux", "Sidetone", "Playback Mixer"},
 
 	/* Mono Capture mixer-mux */
 	{"Capture Right Mixer", "Stereo", "Capture Right Mux"},
@@ -1637,84 +1637,86 @@ static struct snd_soc_device *wm8753_socdev;
  *    low  = 0x1a
  *    high = 0x1b
  */
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
 
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver wm8753_i2c_driver;
-static struct i2c_client client_template;
-
-static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int wm8753_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = wm8753_socdev;
-	struct wm8753_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (!i2c)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		pr_err("failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = wm8753_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("failed to initialise WM8753\n");
-		goto err;
-	}
-
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int wm8753_i2c_detach(struct i2c_client *client)
+static int wm8753_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int wm8753_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, wm8753_codec_probe);
-}
+static const struct i2c_device_id wm8753_i2c_id[] = {
+	{ "wm8753", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8753_i2c_id);
 
-/* corgi i2c codec control layer */
 static struct i2c_driver wm8753_i2c_driver = {
 	.driver = {
 		.name = "WM8753 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.id =             I2C_DRIVERID_WM8753,
-	.attach_adapter = wm8753_i2c_attach,
-	.detach_client =  wm8753_i2c_detach,
-	.command =        NULL,
+	.probe =    wm8753_i2c_probe,
+	.remove =   wm8753_i2c_remove,
+	.id_table = wm8753_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "WM8753",
-	.driver = &wm8753_i2c_driver,
-};
+static int wm8753_add_i2c_device(struct platform_device *pdev,
+				 const struct wm8753_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&wm8753_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "wm8753", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&wm8753_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int wm8753_probe(struct platform_device *pdev)
@@ -1748,11 +1750,8 @@ static int wm8753_probe(struct platform_device *pdev)
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
-		ret = i2c_add_driver(&wm8753_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = wm8753_add_i2c_device(pdev, setup);
 	}
 #else
 		/* Add other interfaces here */
@@ -1796,6 +1795,7 @@ static int wm8753_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8753_i2c_driver);
 #endif
 	kfree(codec->private_data);
diff --git a/sound/soc/codecs/wm8753.h b/sound/soc/codecs/wm8753.h
index 44f5f1f..7defde0 100644
--- a/sound/soc/codecs/wm8753.h
+++ b/sound/soc/codecs/wm8753.h
@@ -79,6 +79,7 @@
 #define WM8753_ADCTL2		0x3f
 
 struct wm8753_setup_data {
+	int i2c_bus;
 	unsigned short i2c_address;
 };
 
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
new file mode 100644
index 0000000..0b8c6d3
--- /dev/null
+++ b/sound/soc/codecs/wm8900.c
@@ -0,0 +1,1542 @@
+/*
+ * wm8900.c  --  WM8900 ALSA Soc Audio driver
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO:
+ *  - Tristating.
+ *  - TDM.
+ *  - Jack detect.
+ *  - FLL source configuration, currently only MCLK is supported.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8900.h"
+
+/* WM8900 register space */
+#define WM8900_REG_RESET	0x0
+#define WM8900_REG_ID		0x0
+#define WM8900_REG_POWER1	0x1
+#define WM8900_REG_POWER2	0x2
+#define WM8900_REG_POWER3	0x3
+#define WM8900_REG_AUDIO1	0x4
+#define WM8900_REG_AUDIO2	0x5
+#define WM8900_REG_CLOCKING1    0x6
+#define WM8900_REG_CLOCKING2    0x7
+#define WM8900_REG_AUDIO3       0x8
+#define WM8900_REG_AUDIO4       0x9
+#define WM8900_REG_DACCTRL      0xa
+#define WM8900_REG_LDAC_DV      0xb
+#define WM8900_REG_RDAC_DV      0xc
+#define WM8900_REG_SIDETONE     0xd
+#define WM8900_REG_ADCCTRL      0xe
+#define WM8900_REG_LADC_DV	0xf
+#define WM8900_REG_RADC_DV      0x10
+#define WM8900_REG_GPIO         0x12
+#define WM8900_REG_INCTL	0x15
+#define WM8900_REG_LINVOL	0x16
+#define WM8900_REG_RINVOL	0x17
+#define WM8900_REG_INBOOSTMIX1  0x18
+#define WM8900_REG_INBOOSTMIX2  0x19
+#define WM8900_REG_ADCPATH	0x1a
+#define WM8900_REG_AUXBOOST	0x1b
+#define WM8900_REG_ADDCTL       0x1e
+#define WM8900_REG_FLLCTL1      0x24
+#define WM8900_REG_FLLCTL2      0x25
+#define WM8900_REG_FLLCTL3      0x26
+#define WM8900_REG_FLLCTL4      0x27
+#define WM8900_REG_FLLCTL5      0x28
+#define WM8900_REG_FLLCTL6      0x29
+#define WM8900_REG_LOUTMIXCTL1  0x2c
+#define WM8900_REG_ROUTMIXCTL1  0x2d
+#define WM8900_REG_BYPASS1	0x2e
+#define WM8900_REG_BYPASS2	0x2f
+#define WM8900_REG_AUXOUT_CTL   0x30
+#define WM8900_REG_LOUT1CTL     0x33
+#define WM8900_REG_ROUT1CTL     0x34
+#define WM8900_REG_LOUT2CTL	0x35
+#define WM8900_REG_ROUT2CTL	0x36
+#define WM8900_REG_HPCTL1	0x3a
+#define WM8900_REG_OUTBIASCTL   0x73
+
+#define WM8900_MAXREG		0x80
+
+#define WM8900_REG_ADDCTL_OUT1_DIS    0x80
+#define WM8900_REG_ADDCTL_OUT2_DIS    0x40
+#define WM8900_REG_ADDCTL_VMID_DIS    0x20
+#define WM8900_REG_ADDCTL_BIAS_SRC    0x10
+#define WM8900_REG_ADDCTL_VMID_SOFTST 0x04
+#define WM8900_REG_ADDCTL_TEMP_SD     0x02
+
+#define WM8900_REG_GPIO_TEMP_ENA   0x2
+
+#define WM8900_REG_POWER1_STARTUP_BIAS_ENA 0x0100
+#define WM8900_REG_POWER1_BIAS_ENA         0x0008
+#define WM8900_REG_POWER1_VMID_BUF_ENA     0x0004
+#define WM8900_REG_POWER1_FLL_ENA          0x0040
+
+#define WM8900_REG_POWER2_SYSCLK_ENA  0x8000
+#define WM8900_REG_POWER2_ADCL_ENA    0x0002
+#define WM8900_REG_POWER2_ADCR_ENA    0x0001
+
+#define WM8900_REG_POWER3_DACL_ENA    0x0002
+#define WM8900_REG_POWER3_DACR_ENA    0x0001
+
+#define WM8900_REG_AUDIO1_AIF_FMT_MASK 0x0018
+#define WM8900_REG_AUDIO1_LRCLK_INV    0x0080
+#define WM8900_REG_AUDIO1_BCLK_INV     0x0100
+
+#define WM8900_REG_CLOCKING1_BCLK_DIR   0x1
+#define WM8900_REG_CLOCKING1_MCLK_SRC   0x100
+#define WM8900_REG_CLOCKING1_BCLK_MASK  (~0x01e)
+#define WM8900_REG_CLOCKING1_OPCLK_MASK (~0x7000)
+
+#define WM8900_REG_CLOCKING2_ADC_CLKDIV 0xe0
+#define WM8900_REG_CLOCKING2_DAC_CLKDIV 0x1c
+
+#define WM8900_REG_DACCTRL_MUTE          0x004
+#define WM8900_REG_DACCTRL_AIF_LRCLKRATE 0x400
+
+#define WM8900_REG_AUDIO3_ADCLRC_DIR    0x0800
+
+#define WM8900_REG_AUDIO4_DACLRC_DIR    0x0800
+
+#define WM8900_REG_FLLCTL1_OSC_ENA    0x100
+
+#define WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF 0x100
+
+#define WM8900_REG_HPCTL1_HP_IPSTAGE_ENA 0x80
+#define WM8900_REG_HPCTL1_HP_OPSTAGE_ENA 0x40
+#define WM8900_REG_HPCTL1_HP_CLAMP_IP    0x20
+#define WM8900_REG_HPCTL1_HP_CLAMP_OP    0x10
+#define WM8900_REG_HPCTL1_HP_SHORT       0x08
+#define WM8900_REG_HPCTL1_HP_SHORT2      0x04
+
+#define WM8900_LRC_MASK 0xfc00
+
+struct snd_soc_codec_device soc_codec_dev_wm8900;
+
+struct wm8900_priv {
+	u32 fll_in; /* FLL input frequency */
+	u32 fll_out; /* FLL output frequency */
+};
+
+/*
+ * wm8900 register cache.  We can't read the entire register space and we
+ * have slow control buses so we cache the registers.
+ */
+static const u16 wm8900_reg_defaults[WM8900_MAXREG] = {
+	0x8900, 0x0000,
+	0xc000, 0x0000,
+	0x4050, 0x4000,
+	0x0008, 0x0000,
+	0x0040, 0x0040,
+	0x1004, 0x00c0,
+	0x00c0, 0x0000,
+	0x0100, 0x00c0,
+	0x00c0, 0x0000,
+	0xb001, 0x0000,
+	0x0000, 0x0044,
+	0x004c, 0x004c,
+	0x0044, 0x0044,
+	0x0000, 0x0044,
+	0x0000, 0x0000,
+	0x0002, 0x0000,
+	0x0000, 0x0000,
+	0x0000, 0x0000,
+	0x0008, 0x0000,
+	0x0000, 0x0008,
+	0x0097, 0x0100,
+	0x0000, 0x0000,
+	0x0050, 0x0050,
+	0x0055, 0x0055,
+	0x0055, 0x0000,
+	0x0000, 0x0079,
+	0x0079, 0x0079,
+	0x0079, 0x0000,
+	/* Remaining registers all zero */
+};
+
+/*
+ * read wm8900 register cache
+ */
+static inline unsigned int wm8900_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	BUG_ON(reg >= WM8900_MAXREG);
+
+	if (reg == WM8900_REG_ID)
+		return 0;
+
+	return cache[reg];
+}
+
+/*
+ * write wm8900 register cache
+ */
+static inline void wm8900_write_reg_cache(struct snd_soc_codec *codec,
+	u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+
+	BUG_ON(reg >= WM8900_MAXREG);
+
+	cache[reg] = value;
+}
+
+/*
+ * write to the WM8900 register space
+ */
+static int wm8900_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	u8 data[3];
+
+	if (value == wm8900_read_reg_cache(codec, reg))
+		return 0;
+
+	/* data is
+	 *   D15..D9 WM8900 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = reg;
+	data[1] = value >> 8;
+	data[2] = value & 0x00ff;
+
+	wm8900_write_reg_cache(codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 3) == 3)
+		return 0;
+	else
+		return -EIO;
+}
+
+/*
+ * Read from the wm8900.
+ */
+static unsigned int wm8900_chip_read(struct snd_soc_codec *codec, u8 reg)
+{
+	struct i2c_msg xfer[2];
+	u16 data;
+	int ret;
+	struct i2c_client *client = codec->control_data;
+
+	BUG_ON(reg != WM8900_REG_ID && reg != WM8900_REG_POWER1);
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 1;
+	xfer[0].buf = &reg;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = 2;
+	xfer[1].buf = (u8 *)&data;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret != 2) {
+		printk(KERN_CRIT "i2c_transfer returned %d\n", ret);
+		return 0;
+	}
+
+	return (data >> 8) | ((data & 0xff) << 8);
+}
+
+/*
+ * Read from the WM8900 register space.  Most registers can't be read
+ * and are therefore supplied from cache.
+ */
+static unsigned int wm8900_read(struct snd_soc_codec *codec, unsigned int reg)
+{
+	switch (reg) {
+	case WM8900_REG_ID:
+		return wm8900_chip_read(codec, reg);
+	default:
+		return wm8900_read_reg_cache(codec, reg);
+	}
+}
+
+static void wm8900_reset(struct snd_soc_codec *codec)
+{
+	wm8900_write(codec, WM8900_REG_RESET, 0);
+
+	memcpy(codec->reg_cache, wm8900_reg_defaults,
+	       sizeof(codec->reg_cache));
+}
+
+static int wm8900_hp_event(struct snd_soc_dapm_widget *w,
+			   struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u16 hpctl1 = wm8900_read(codec, WM8900_REG_HPCTL1);
+
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		/* Clamp headphone outputs */
+		hpctl1 = WM8900_REG_HPCTL1_HP_CLAMP_IP |
+			WM8900_REG_HPCTL1_HP_CLAMP_OP;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+		break;
+
+	case SND_SOC_DAPM_POST_PMU:
+		/* Enable the input stage */
+		hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_IP;
+		hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT |
+			WM8900_REG_HPCTL1_HP_SHORT2 |
+			WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+
+		msleep(400);
+
+		/* Enable the output stage */
+		hpctl1 &= ~WM8900_REG_HPCTL1_HP_CLAMP_OP;
+		hpctl1 |= WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+
+		/* Remove the shorts */
+		hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT2;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+		hpctl1 &= ~WM8900_REG_HPCTL1_HP_SHORT;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+		break;
+
+	case SND_SOC_DAPM_PRE_PMD:
+		/* Short the output */
+		hpctl1 |= WM8900_REG_HPCTL1_HP_SHORT;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+
+		/* Disable the output stage */
+		hpctl1 &= ~WM8900_REG_HPCTL1_HP_OPSTAGE_ENA;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+
+		/* Clamp the outputs and power down input */
+		hpctl1 |= WM8900_REG_HPCTL1_HP_CLAMP_IP |
+			WM8900_REG_HPCTL1_HP_CLAMP_OP;
+		hpctl1 &= ~WM8900_REG_HPCTL1_HP_IPSTAGE_ENA;
+		wm8900_write(codec, WM8900_REG_HPCTL1, hpctl1);
+		break;
+
+	case SND_SOC_DAPM_POST_PMD:
+		/* Disable everything */
+		wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+		break;
+
+	default:
+		BUG();
+	}
+
+	return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(out_pga_tlv, -5700, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(out_mix_tlv, -1500, 300, 0);
+
+static const DECLARE_TLV_DB_SCALE(in_boost_tlv, -1200, 600, 0);
+
+static const DECLARE_TLV_DB_SCALE(in_pga_tlv, -1200, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
+
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -7200, 75, 1);
+
+static const DECLARE_TLV_DB_SCALE(adc_svol_tlv, -3600, 300, 0);
+
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1);
+
+static const char *mic_bias_level_txt[] = { "0.9*AVDD", "0.65*AVDD" };
+
+static const struct soc_enum mic_bias_level =
+SOC_ENUM_SINGLE(WM8900_REG_INCTL, 8, 2, mic_bias_level_txt);
+
+static const char *dac_mute_rate_txt[] = { "Fast", "Slow" };
+
+static const struct soc_enum dac_mute_rate =
+SOC_ENUM_SINGLE(WM8900_REG_DACCTRL, 7, 2, dac_mute_rate_txt);
+
+static const char *dac_deemphasis_txt[] = {
+	"Disabled", "32kHz", "44.1kHz", "48kHz"
+};
+
+static const struct soc_enum dac_deemphasis =
+SOC_ENUM_SINGLE(WM8900_REG_DACCTRL, 4, 4, dac_deemphasis_txt);
+
+static const char *adc_hpf_cut_txt[] = {
+	"Hi-fi mode", "Voice mode 1", "Voice mode 2", "Voice mode 3"
+};
+
+static const struct soc_enum adc_hpf_cut =
+SOC_ENUM_SINGLE(WM8900_REG_ADCCTRL, 5, 4, adc_hpf_cut_txt);
+
+static const char *lr_txt[] = {
+	"Left", "Right"
+};
+
+static const struct soc_enum aifl_src =
+SOC_ENUM_SINGLE(WM8900_REG_AUDIO1, 15, 2, lr_txt);
+
+static const struct soc_enum aifr_src =
+SOC_ENUM_SINGLE(WM8900_REG_AUDIO1, 14, 2, lr_txt);
+
+static const struct soc_enum dacl_src =
+SOC_ENUM_SINGLE(WM8900_REG_AUDIO2, 15, 2, lr_txt);
+
+static const struct soc_enum dacr_src =
+SOC_ENUM_SINGLE(WM8900_REG_AUDIO2, 14, 2, lr_txt);
+
+static const char *sidetone_txt[] = {
+	"Disabled", "Left ADC", "Right ADC"
+};
+
+static const struct soc_enum dacl_sidetone =
+SOC_ENUM_SINGLE(WM8900_REG_SIDETONE, 2, 3, sidetone_txt);
+
+static const struct soc_enum dacr_sidetone =
+SOC_ENUM_SINGLE(WM8900_REG_SIDETONE, 0, 3, sidetone_txt);
+
+static const struct snd_kcontrol_new wm8900_snd_controls[] = {
+SOC_ENUM("Mic Bias Level", mic_bias_level),
+
+SOC_SINGLE_TLV("Left Input PGA Volume", WM8900_REG_LINVOL, 0, 31, 0,
+	       in_pga_tlv),
+SOC_SINGLE("Left Input PGA Switch", WM8900_REG_LINVOL, 6, 1, 1),
+SOC_SINGLE("Left Input PGA ZC Switch", WM8900_REG_LINVOL, 7, 1, 0),
+
+SOC_SINGLE_TLV("Right Input PGA Volume", WM8900_REG_RINVOL, 0, 31, 0,
+	       in_pga_tlv),
+SOC_SINGLE("Right Input PGA Switch", WM8900_REG_RINVOL, 6, 1, 1),
+SOC_SINGLE("Right Input PGA ZC Switch", WM8900_REG_RINVOL, 7, 1, 0),
+
+SOC_SINGLE("DAC Soft Mute Switch", WM8900_REG_DACCTRL, 6, 1, 1),
+SOC_ENUM("DAC Mute Rate", dac_mute_rate),
+SOC_SINGLE("DAC Mono Switch", WM8900_REG_DACCTRL, 9, 1, 0),
+SOC_ENUM("DAC Deemphasis", dac_deemphasis),
+SOC_SINGLE("DAC Sloping Stopband Filter Switch", WM8900_REG_DACCTRL, 8, 1, 0),
+SOC_SINGLE("DAC Sigma-Delta Modulator Clock Switch", WM8900_REG_DACCTRL,
+	   12, 1, 0),
+
+SOC_SINGLE("ADC HPF Switch", WM8900_REG_ADCCTRL, 8, 1, 0),
+SOC_ENUM("ADC HPF Cut-Off", adc_hpf_cut),
+SOC_DOUBLE("ADC Invert Switch", WM8900_REG_ADCCTRL, 1, 0, 1, 0),
+SOC_SINGLE_TLV("Left ADC Sidetone Volume", WM8900_REG_SIDETONE, 9, 12, 0,
+	       adc_svol_tlv),
+SOC_SINGLE_TLV("Right ADC Sidetone Volume", WM8900_REG_SIDETONE, 5, 12, 0,
+	       adc_svol_tlv),
+SOC_ENUM("Left Digital Audio Source", aifl_src),
+SOC_ENUM("Right Digital Audio Source", aifr_src),
+
+SOC_SINGLE_TLV("DAC Input Boost Volume", WM8900_REG_AUDIO2, 10, 4, 0,
+	       dac_boost_tlv),
+SOC_ENUM("Left DAC Source", dacl_src),
+SOC_ENUM("Right DAC Source", dacr_src),
+SOC_ENUM("Left DAC Sidetone", dacl_sidetone),
+SOC_ENUM("Right DAC Sidetone", dacr_sidetone),
+SOC_DOUBLE("DAC Invert Switch", WM8900_REG_DACCTRL, 1, 0, 1, 0),
+
+SOC_DOUBLE_R_TLV("Digital Playback Volume",
+		 WM8900_REG_LDAC_DV, WM8900_REG_RDAC_DV,
+		 1, 96, 0, dac_tlv),
+SOC_DOUBLE_R_TLV("Digital Capture Volume",
+		 WM8900_REG_LADC_DV, WM8900_REG_RADC_DV, 1, 119, 0, adc_tlv),
+
+SOC_SINGLE_TLV("LINPUT3 Bypass Volume", WM8900_REG_LOUTMIXCTL1, 4, 7, 0,
+	       out_mix_tlv),
+SOC_SINGLE_TLV("RINPUT3 Bypass Volume", WM8900_REG_ROUTMIXCTL1, 4, 7, 0,
+	       out_mix_tlv),
+SOC_SINGLE_TLV("Left AUX Bypass Volume", WM8900_REG_AUXOUT_CTL, 4, 7, 0,
+	       out_mix_tlv),
+SOC_SINGLE_TLV("Right AUX Bypass Volume", WM8900_REG_AUXOUT_CTL, 0, 7, 0,
+	       out_mix_tlv),
+
+SOC_SINGLE_TLV("LeftIn to RightOut Mixer Volume", WM8900_REG_BYPASS1, 0, 7, 0,
+	       out_mix_tlv),
+SOC_SINGLE_TLV("LeftIn to LeftOut Mixer Volume", WM8900_REG_BYPASS1, 4, 7, 0,
+	       out_mix_tlv),
+SOC_SINGLE_TLV("RightIn to LeftOut Mixer Volume", WM8900_REG_BYPASS2, 0, 7, 0,
+	       out_mix_tlv),
+SOC_SINGLE_TLV("RightIn to RightOut Mixer Volume", WM8900_REG_BYPASS2, 4, 7, 0,
+	       out_mix_tlv),
+
+SOC_SINGLE_TLV("IN2L Boost Volume", WM8900_REG_INBOOSTMIX1, 0, 3, 0,
+	       in_boost_tlv),
+SOC_SINGLE_TLV("IN3L Boost Volume", WM8900_REG_INBOOSTMIX1, 4, 3, 0,
+	       in_boost_tlv),
+SOC_SINGLE_TLV("IN2R Boost Volume", WM8900_REG_INBOOSTMIX2, 0, 3, 0,
+	       in_boost_tlv),
+SOC_SINGLE_TLV("IN3R Boost Volume", WM8900_REG_INBOOSTMIX2, 4, 3, 0,
+	       in_boost_tlv),
+SOC_SINGLE_TLV("Left AUX Boost Volume", WM8900_REG_AUXBOOST, 4, 3, 0,
+	       in_boost_tlv),
+SOC_SINGLE_TLV("Right AUX Boost Volume", WM8900_REG_AUXBOOST, 0, 3, 0,
+	       in_boost_tlv),
+
+SOC_DOUBLE_R_TLV("LINEOUT1 Volume", WM8900_REG_LOUT1CTL, WM8900_REG_ROUT1CTL,
+	       0, 63, 0, out_pga_tlv),
+SOC_DOUBLE_R("LINEOUT1 Switch", WM8900_REG_LOUT1CTL, WM8900_REG_ROUT1CTL,
+	     6, 1, 1),
+SOC_DOUBLE_R("LINEOUT1 ZC Switch", WM8900_REG_LOUT1CTL, WM8900_REG_ROUT1CTL,
+	     7, 1, 0),
+
+SOC_DOUBLE_R_TLV("LINEOUT2 Volume",
+		 WM8900_REG_LOUT2CTL, WM8900_REG_ROUT2CTL,
+		 0, 63, 0, out_pga_tlv),
+SOC_DOUBLE_R("LINEOUT2 Switch",
+	     WM8900_REG_LOUT2CTL, WM8900_REG_ROUT2CTL, 6, 1, 1),
+SOC_DOUBLE_R("LINEOUT2 ZC Switch",
+	     WM8900_REG_LOUT2CTL, WM8900_REG_ROUT2CTL, 7, 1, 0),
+SOC_SINGLE("LINEOUT2 LP -12dB", WM8900_REG_LOUTMIXCTL1,
+	   0, 1, 1),
+
+};
+
+/* add non dapm controls */
+static int wm8900_add_controls(struct snd_soc_codec *codec)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm8900_snd_controls); i++) {
+		err = snd_ctl_add(codec->card,
+				  snd_soc_cnew(&wm8900_snd_controls[i],
+					       codec, NULL));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new wm8900_dapm_loutput2_control =
+SOC_DAPM_SINGLE("LINEOUT2L Switch", WM8900_REG_POWER3, 6, 1, 0);
+
+static const struct snd_kcontrol_new wm8900_dapm_routput2_control =
+SOC_DAPM_SINGLE("LINEOUT2R Switch", WM8900_REG_POWER3, 5, 1, 0);
+
+static const struct snd_kcontrol_new wm8900_loutmix_controls[] = {
+SOC_DAPM_SINGLE("LINPUT3 Bypass Switch", WM8900_REG_LOUTMIXCTL1, 7, 1, 0),
+SOC_DAPM_SINGLE("AUX Bypass Switch", WM8900_REG_AUXOUT_CTL, 7, 1, 0),
+SOC_DAPM_SINGLE("Left Input Mixer Switch", WM8900_REG_BYPASS1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Input Mixer Switch", WM8900_REG_BYPASS2, 3, 1, 0),
+SOC_DAPM_SINGLE("DACL Switch", WM8900_REG_LOUTMIXCTL1, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8900_routmix_controls[] = {
+SOC_DAPM_SINGLE("RINPUT3 Bypass Switch", WM8900_REG_ROUTMIXCTL1, 7, 1, 0),
+SOC_DAPM_SINGLE("AUX Bypass Switch", WM8900_REG_AUXOUT_CTL, 3, 1, 0),
+SOC_DAPM_SINGLE("Left Input Mixer Switch", WM8900_REG_BYPASS1, 3, 1, 0),
+SOC_DAPM_SINGLE("Right Input Mixer Switch", WM8900_REG_BYPASS2, 7, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8900_REG_ROUTMIXCTL1, 8, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8900_linmix_controls[] = {
+SOC_DAPM_SINGLE("LINPUT2 Switch", WM8900_REG_INBOOSTMIX1, 2, 1, 1),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8900_REG_INBOOSTMIX1, 6, 1, 1),
+SOC_DAPM_SINGLE("AUX Switch", WM8900_REG_AUXBOOST, 6, 1, 1),
+SOC_DAPM_SINGLE("Input PGA Switch", WM8900_REG_ADCPATH, 6, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8900_rinmix_controls[] = {
+SOC_DAPM_SINGLE("RINPUT2 Switch", WM8900_REG_INBOOSTMIX2, 2, 1, 1),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8900_REG_INBOOSTMIX2, 6, 1, 1),
+SOC_DAPM_SINGLE("AUX Switch", WM8900_REG_AUXBOOST, 2, 1, 1),
+SOC_DAPM_SINGLE("Input PGA Switch", WM8900_REG_ADCPATH, 2, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8900_linpga_controls[] = {
+SOC_DAPM_SINGLE("LINPUT1 Switch", WM8900_REG_INCTL, 6, 1, 0),
+SOC_DAPM_SINGLE("LINPUT2 Switch", WM8900_REG_INCTL, 5, 1, 0),
+SOC_DAPM_SINGLE("LINPUT3 Switch", WM8900_REG_INCTL, 4, 1, 0),
+};
+
+static const struct snd_kcontrol_new wm8900_rinpga_controls[] = {
+SOC_DAPM_SINGLE("RINPUT1 Switch", WM8900_REG_INCTL, 2, 1, 0),
+SOC_DAPM_SINGLE("RINPUT2 Switch", WM8900_REG_INCTL, 1, 1, 0),
+SOC_DAPM_SINGLE("RINPUT3 Switch", WM8900_REG_INCTL, 0, 1, 0),
+};
+
+static const char *wm9700_lp_mux[] = { "Disabled", "Enabled" };
+
+static const struct soc_enum wm8900_lineout2_lp_mux =
+SOC_ENUM_SINGLE(WM8900_REG_LOUTMIXCTL1, 1, 2, wm9700_lp_mux);
+
+static const struct snd_kcontrol_new wm8900_lineout2_lp =
+SOC_DAPM_ENUM("Route", wm8900_lineout2_lp_mux);
+
+static const struct snd_soc_dapm_widget wm8900_dapm_widgets[] = {
+
+/* Externally visible pins */
+SND_SOC_DAPM_OUTPUT("LINEOUT1L"),
+SND_SOC_DAPM_OUTPUT("LINEOUT1R"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2L"),
+SND_SOC_DAPM_OUTPUT("LINEOUT2R"),
+SND_SOC_DAPM_OUTPUT("HP_L"),
+SND_SOC_DAPM_OUTPUT("HP_R"),
+
+SND_SOC_DAPM_INPUT("RINPUT1"),
+SND_SOC_DAPM_INPUT("LINPUT1"),
+SND_SOC_DAPM_INPUT("RINPUT2"),
+SND_SOC_DAPM_INPUT("LINPUT2"),
+SND_SOC_DAPM_INPUT("RINPUT3"),
+SND_SOC_DAPM_INPUT("LINPUT3"),
+SND_SOC_DAPM_INPUT("AUX"),
+
+SND_SOC_DAPM_VMID("VMID"),
+
+/* Input */
+SND_SOC_DAPM_MIXER("Left Input PGA", WM8900_REG_POWER2, 3, 0,
+		   wm8900_linpga_controls,
+		   ARRAY_SIZE(wm8900_linpga_controls)),
+SND_SOC_DAPM_MIXER("Right Input PGA", WM8900_REG_POWER2, 2, 0,
+		   wm8900_rinpga_controls,
+		   ARRAY_SIZE(wm8900_rinpga_controls)),
+
+SND_SOC_DAPM_MIXER("Left Input Mixer", WM8900_REG_POWER2, 5, 0,
+		   wm8900_linmix_controls,
+		   ARRAY_SIZE(wm8900_linmix_controls)),
+SND_SOC_DAPM_MIXER("Right Input Mixer", WM8900_REG_POWER2, 4, 0,
+		   wm8900_rinmix_controls,
+		   ARRAY_SIZE(wm8900_rinmix_controls)),
+
+SND_SOC_DAPM_MICBIAS("Mic Bias", WM8900_REG_POWER1, 4, 0),
+
+SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8900_REG_POWER2, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8900_REG_POWER2, 0, 0),
+
+/* Output */
+SND_SOC_DAPM_DAC("DACL", "Left HiFi Playback", WM8900_REG_POWER3, 1, 0),
+SND_SOC_DAPM_DAC("DACR", "Right HiFi Playback", WM8900_REG_POWER3, 0, 0),
+
+SND_SOC_DAPM_PGA_E("Headphone Amplifier", WM8900_REG_POWER3, 7, 0, NULL, 0,
+		   wm8900_hp_event,
+		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA("LINEOUT1L PGA", WM8900_REG_POWER2, 8, 0, NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT1R PGA", WM8900_REG_POWER2, 7, 0, NULL, 0),
+
+SND_SOC_DAPM_MUX("LINEOUT2 LP", SND_SOC_NOPM, 0, 0, &wm8900_lineout2_lp),
+SND_SOC_DAPM_PGA("LINEOUT2L PGA", WM8900_REG_POWER3, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA("LINEOUT2R PGA", WM8900_REG_POWER3, 5, 0, NULL, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8900_REG_POWER3, 3, 0,
+		   wm8900_loutmix_controls,
+		   ARRAY_SIZE(wm8900_loutmix_controls)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8900_REG_POWER3, 2, 0,
+		   wm8900_routmix_controls,
+		   ARRAY_SIZE(wm8900_routmix_controls)),
+};
+
+/* Target, Path, Source */
+static const struct snd_soc_dapm_route audio_map[] = {
+/* Inputs */
+{"Left Input PGA", "LINPUT1 Switch", "LINPUT1"},
+{"Left Input PGA", "LINPUT2 Switch", "LINPUT2"},
+{"Left Input PGA", "LINPUT3 Switch", "LINPUT3"},
+
+{"Right Input PGA", "RINPUT1 Switch", "RINPUT1"},
+{"Right Input PGA", "RINPUT2 Switch", "RINPUT2"},
+{"Right Input PGA", "RINPUT3 Switch", "RINPUT3"},
+
+{"Left Input Mixer", "LINPUT2 Switch", "LINPUT2"},
+{"Left Input Mixer", "LINPUT3 Switch", "LINPUT3"},
+{"Left Input Mixer", "AUX Switch", "AUX"},
+{"Left Input Mixer", "Input PGA Switch", "Left Input PGA"},
+
+{"Right Input Mixer", "RINPUT2 Switch", "RINPUT2"},
+{"Right Input Mixer", "RINPUT3 Switch", "RINPUT3"},
+{"Right Input Mixer", "AUX Switch", "AUX"},
+{"Right Input Mixer", "Input PGA Switch", "Right Input PGA"},
+
+{"ADCL", NULL, "Left Input Mixer"},
+{"ADCR", NULL, "Right Input Mixer"},
+
+/* Outputs */
+{"LINEOUT1L", NULL, "LINEOUT1L PGA"},
+{"LINEOUT1L PGA", NULL, "Left Output Mixer"},
+{"LINEOUT1R", NULL, "LINEOUT1R PGA"},
+{"LINEOUT1R PGA", NULL, "Right Output Mixer"},
+
+{"LINEOUT2L PGA", NULL, "Left Output Mixer"},
+{"LINEOUT2 LP", "Disabled", "LINEOUT2L PGA"},
+{"LINEOUT2 LP", "Enabled", "Left Output Mixer"},
+{"LINEOUT2L", NULL, "LINEOUT2 LP"},
+
+{"LINEOUT2R PGA", NULL, "Right Output Mixer"},
+{"LINEOUT2 LP", "Disabled", "LINEOUT2R PGA"},
+{"LINEOUT2 LP", "Enabled", "Right Output Mixer"},
+{"LINEOUT2R", NULL, "LINEOUT2 LP"},
+
+{"Left Output Mixer", "LINPUT3 Bypass Switch", "LINPUT3"},
+{"Left Output Mixer", "AUX Bypass Switch", "AUX"},
+{"Left Output Mixer", "Left Input Mixer Switch", "Left Input Mixer"},
+{"Left Output Mixer", "Right Input Mixer Switch", "Right Input Mixer"},
+{"Left Output Mixer", "DACL Switch", "DACL"},
+
+{"Right Output Mixer", "RINPUT3 Bypass Switch", "RINPUT3"},
+{"Right Output Mixer", "AUX Bypass Switch", "AUX"},
+{"Right Output Mixer", "Left Input Mixer Switch", "Left Input Mixer"},
+{"Right Output Mixer", "Right Input Mixer Switch", "Right Input Mixer"},
+{"Right Output Mixer", "DACR Switch", "DACR"},
+
+/* Note that the headphone output stage needs to be connected
+ * externally to LINEOUT2 via DC blocking capacitors.  Other
+ * configurations are not supported.
+ *
+ * Note also that left and right headphone paths are treated as a
+ * mono path.
+ */
+{"Headphone Amplifier", NULL, "LINEOUT2 LP"},
+{"Headphone Amplifier", NULL, "LINEOUT2 LP"},
+{"HP_L", NULL, "Headphone Amplifier"},
+{"HP_R", NULL, "Headphone Amplifier"},
+};
+
+static int wm8900_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8900_dapm_widgets,
+				  ARRAY_SIZE(wm8900_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_new_widgets(codec);
+
+	return 0;
+}
+
+static int wm8900_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	u16 reg;
+
+	reg = wm8900_read(codec, WM8900_REG_AUDIO1) & ~0x60;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		reg |= 0x20;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		reg |= 0x40;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		reg |= 0x60;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8900_write(codec, WM8900_REG_AUDIO1, reg);
+
+	return 0;
+}
+
+/* FLL divisors */
+struct _fll_div {
+	u16 fll_ratio;
+	u16 fllclk_div;
+	u16 fll_slow_lock_ref;
+	u16 n;
+	u16 k;
+};
+
+/* The size in bits of the FLL divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
+		       unsigned int Fout)
+{
+	u64 Kpart;
+	unsigned int K, Ndiv, Nmod, target;
+	unsigned int div;
+
+	BUG_ON(!Fout);
+
+	/* The FLL must run at 90-100MHz which is then scaled down to
+	 * the output value by FLLCLK_DIV. */
+	target = Fout;
+	div = 1;
+	while (target < 90000000) {
+		div *= 2;
+		target *= 2;
+	}
+
+	if (target > 100000000)
+		printk(KERN_WARNING "wm8900: FLL rate %d out of range, Fref=%d"
+		       " Fout=%d\n", target, Fref, Fout);
+	if (div > 32) {
+		printk(KERN_ERR "wm8900: Invalid FLL division rate %u, "
+		       "Fref=%d, Fout=%d, target=%d\n",
+		       div, Fref, Fout, target);
+		return -EINVAL;
+	}
+
+	fll_div->fllclk_div = div >> 2;
+
+	if (Fref < 48000)
+		fll_div->fll_slow_lock_ref = 1;
+	else
+		fll_div->fll_slow_lock_ref = 0;
+
+	Ndiv = target / Fref;
+
+	if (Fref < 1000000)
+		fll_div->fll_ratio = 8;
+	else
+		fll_div->fll_ratio = 1;
+
+	fll_div->n = Ndiv / fll_div->fll_ratio;
+	Nmod = (target / fll_div->fll_ratio) % Fref;
+
+	/* Calculate fractional part - scale up so we can round. */
+	Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+
+	do_div(Kpart, Fref);
+
+	K = Kpart & 0xFFFFFFFF;
+
+	if ((K % 10) >= 5)
+		K += 5;
+
+	/* Move down to proper range now rounding is done */
+	fll_div->k = K / 10;
+
+	BUG_ON(target != Fout * (fll_div->fllclk_div << 2));
+	BUG_ON(!K && target != Fref * fll_div->fll_ratio * fll_div->n);
+
+	return 0;
+}
+
+static int wm8900_set_fll(struct snd_soc_codec *codec,
+	int fll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	struct wm8900_priv *wm8900 = codec->private_data;
+	struct _fll_div fll_div;
+	unsigned int reg;
+
+	if (wm8900->fll_in == freq_in && wm8900->fll_out == freq_out)
+		return 0;
+
+	/* The digital side should be disabled during any change. */
+	reg = wm8900_read(codec, WM8900_REG_POWER1);
+	wm8900_write(codec, WM8900_REG_POWER1,
+		     reg & (~WM8900_REG_POWER1_FLL_ENA));
+
+	/* Disable the FLL? */
+	if (!freq_in || !freq_out) {
+		reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
+		wm8900_write(codec, WM8900_REG_CLOCKING1,
+			     reg & (~WM8900_REG_CLOCKING1_MCLK_SRC));
+
+		reg = wm8900_read(codec, WM8900_REG_FLLCTL1);
+		wm8900_write(codec, WM8900_REG_FLLCTL1,
+			     reg & (~WM8900_REG_FLLCTL1_OSC_ENA));
+
+		wm8900->fll_in = freq_in;
+		wm8900->fll_out = freq_out;
+
+		return 0;
+	}
+
+	if (fll_factors(&fll_div, freq_in, freq_out) != 0)
+		goto reenable;
+
+	wm8900->fll_in = freq_in;
+	wm8900->fll_out = freq_out;
+
+	/* The osclilator *MUST* be enabled before we enable the
+	 * digital circuit. */
+	wm8900_write(codec, WM8900_REG_FLLCTL1,
+		     fll_div.fll_ratio | WM8900_REG_FLLCTL1_OSC_ENA);
+
+	wm8900_write(codec, WM8900_REG_FLLCTL4, fll_div.n >> 5);
+	wm8900_write(codec, WM8900_REG_FLLCTL5,
+		     (fll_div.fllclk_div << 6) | (fll_div.n & 0x1f));
+
+	if (fll_div.k) {
+		wm8900_write(codec, WM8900_REG_FLLCTL2,
+			     (fll_div.k >> 8) | 0x100);
+		wm8900_write(codec, WM8900_REG_FLLCTL3, fll_div.k & 0xff);
+	} else
+		wm8900_write(codec, WM8900_REG_FLLCTL2, 0);
+
+	if (fll_div.fll_slow_lock_ref)
+		wm8900_write(codec, WM8900_REG_FLLCTL6,
+			     WM8900_REG_FLLCTL6_FLL_SLOW_LOCK_REF);
+	else
+		wm8900_write(codec, WM8900_REG_FLLCTL6, 0);
+
+	reg = wm8900_read(codec, WM8900_REG_POWER1);
+	wm8900_write(codec, WM8900_REG_POWER1,
+		     reg | WM8900_REG_POWER1_FLL_ENA);
+
+reenable:
+	reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
+	wm8900_write(codec, WM8900_REG_CLOCKING1,
+		     reg | WM8900_REG_CLOCKING1_MCLK_SRC);
+
+	return 0;
+}
+
+static int wm8900_set_dai_pll(struct snd_soc_dai *codec_dai,
+		int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+	return wm8900_set_fll(codec_dai->codec, pll_id, freq_in, freq_out);
+}
+
+static int wm8900_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+				 int div_id, int div)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int reg;
+
+	switch (div_id) {
+	case WM8900_BCLK_DIV:
+		reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
+		wm8900_write(codec, WM8900_REG_CLOCKING1,
+			     div | (reg & WM8900_REG_CLOCKING1_BCLK_MASK));
+		break;
+	case WM8900_OPCLK_DIV:
+		reg = wm8900_read(codec, WM8900_REG_CLOCKING1);
+		wm8900_write(codec, WM8900_REG_CLOCKING1,
+			     div | (reg & WM8900_REG_CLOCKING1_OPCLK_MASK));
+		break;
+	case WM8900_DAC_LRCLK:
+		reg = wm8900_read(codec, WM8900_REG_AUDIO4);
+		wm8900_write(codec, WM8900_REG_AUDIO4,
+			     div | (reg & WM8900_LRC_MASK));
+		break;
+	case WM8900_ADC_LRCLK:
+		reg = wm8900_read(codec, WM8900_REG_AUDIO3);
+		wm8900_write(codec, WM8900_REG_AUDIO3,
+			     div | (reg & WM8900_LRC_MASK));
+		break;
+	case WM8900_DAC_CLKDIV:
+		reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
+		wm8900_write(codec, WM8900_REG_CLOCKING2,
+			     div | (reg & WM8900_REG_CLOCKING2_DAC_CLKDIV));
+		break;
+	case WM8900_ADC_CLKDIV:
+		reg = wm8900_read(codec, WM8900_REG_CLOCKING2);
+		wm8900_write(codec, WM8900_REG_CLOCKING2,
+			     div | (reg & WM8900_REG_CLOCKING2_ADC_CLKDIV));
+		break;
+	case WM8900_LRCLK_MODE:
+		reg = wm8900_read(codec, WM8900_REG_DACCTRL);
+		wm8900_write(codec, WM8900_REG_DACCTRL,
+			     div | (reg & WM8900_REG_DACCTRL_AIF_LRCLKRATE));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int wm8900_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	unsigned int clocking1, aif1, aif3, aif4;
+
+	clocking1 = wm8900_read(codec, WM8900_REG_CLOCKING1);
+	aif1 = wm8900_read(codec, WM8900_REG_AUDIO1);
+	aif3 = wm8900_read(codec, WM8900_REG_AUDIO3);
+	aif4 = wm8900_read(codec, WM8900_REG_AUDIO4);
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		clocking1 &= ~WM8900_REG_CLOCKING1_BCLK_DIR;
+		aif3 &= ~WM8900_REG_AUDIO3_ADCLRC_DIR;
+		aif4 &= ~WM8900_REG_AUDIO4_DACLRC_DIR;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		clocking1 &= ~WM8900_REG_CLOCKING1_BCLK_DIR;
+		aif3 |= WM8900_REG_AUDIO3_ADCLRC_DIR;
+		aif4 |= WM8900_REG_AUDIO4_DACLRC_DIR;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		clocking1 |= WM8900_REG_CLOCKING1_BCLK_DIR;
+		aif3 |= WM8900_REG_AUDIO3_ADCLRC_DIR;
+		aif4 |= WM8900_REG_AUDIO4_DACLRC_DIR;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		clocking1 |= WM8900_REG_CLOCKING1_BCLK_DIR;
+		aif3 &= ~WM8900_REG_AUDIO3_ADCLRC_DIR;
+		aif4 &= ~WM8900_REG_AUDIO4_DACLRC_DIR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		aif1 |= WM8900_REG_AUDIO1_AIF_FMT_MASK;
+		aif1 &= ~WM8900_REG_AUDIO1_LRCLK_INV;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		aif1 |= WM8900_REG_AUDIO1_AIF_FMT_MASK;
+		aif1 |= WM8900_REG_AUDIO1_LRCLK_INV;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif1 &= ~WM8900_REG_AUDIO1_AIF_FMT_MASK;
+		aif1 |= 0x10;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		aif1 &= ~WM8900_REG_AUDIO1_AIF_FMT_MASK;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif1 &= ~WM8900_REG_AUDIO1_AIF_FMT_MASK;
+		aif1 |= 0x8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			aif1 &= ~WM8900_REG_AUDIO1_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif1 |= WM8900_REG_AUDIO1_BCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			aif1 &= ~WM8900_REG_AUDIO1_BCLK_INV;
+			aif1 &= ~WM8900_REG_AUDIO1_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif1 |= WM8900_REG_AUDIO1_BCLK_INV;
+			aif1 |= WM8900_REG_AUDIO1_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif1 |= WM8900_REG_AUDIO1_BCLK_INV;
+			aif1 &= ~WM8900_REG_AUDIO1_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif1 &= ~WM8900_REG_AUDIO1_BCLK_INV;
+			aif1 |= WM8900_REG_AUDIO1_LRCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8900_write(codec, WM8900_REG_CLOCKING1, clocking1);
+	wm8900_write(codec, WM8900_REG_AUDIO1, aif1);
+	wm8900_write(codec, WM8900_REG_AUDIO3, aif3);
+	wm8900_write(codec, WM8900_REG_AUDIO4, aif4);
+
+	return 0;
+}
+
+static int wm8900_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	reg = wm8900_read(codec, WM8900_REG_DACCTRL);
+
+	if (mute)
+		reg |= WM8900_REG_DACCTRL_MUTE;
+	else
+		reg &= ~WM8900_REG_DACCTRL_MUTE;
+
+	wm8900_write(codec, WM8900_REG_DACCTRL, reg);
+
+	return 0;
+}
+
+#define WM8900_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+		      SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+		      SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000)
+
+#define WM8900_PCM_FORMATS \
+	(SNDRV_PCM_FORMAT_S16_LE | SNDRV_PCM_FORMAT_S20_3LE | \
+	 SNDRV_PCM_FORMAT_S24_LE)
+
+struct snd_soc_dai wm8900_dai = {
+	.name = "WM8900 HiFi",
+	.playback = {
+		.stream_name = "HiFi Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8900_RATES,
+		.formats = WM8900_PCM_FORMATS,
+	},
+	.capture = {
+		.stream_name = "HiFi Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8900_RATES,
+		.formats = WM8900_PCM_FORMATS,
+	 },
+	.ops = {
+		.hw_params = wm8900_hw_params,
+	 },
+	.dai_ops = {
+		 .set_clkdiv = wm8900_set_dai_clkdiv,
+		 .set_pll = wm8900_set_dai_pll,
+		 .set_fmt = wm8900_set_dai_fmt,
+		 .digital_mute = wm8900_digital_mute,
+	 },
+};
+EXPORT_SYMBOL_GPL(wm8900_dai);
+
+static int wm8900_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	u16 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* Enable thermal shutdown */
+		reg = wm8900_read(codec, WM8900_REG_GPIO);
+		wm8900_write(codec, WM8900_REG_GPIO,
+			     reg | WM8900_REG_GPIO_TEMP_ENA);
+		reg = wm8900_read(codec, WM8900_REG_ADDCTL);
+		wm8900_write(codec, WM8900_REG_ADDCTL,
+			     reg | WM8900_REG_ADDCTL_TEMP_SD);
+		break;
+
+	case SND_SOC_BIAS_PREPARE:
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		/* Charge capacitors if initial power up */
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			/* STARTUP_BIAS_ENA on */
+			wm8900_write(codec, WM8900_REG_POWER1,
+				     WM8900_REG_POWER1_STARTUP_BIAS_ENA);
+
+			/* Startup bias mode */
+			wm8900_write(codec, WM8900_REG_ADDCTL,
+				     WM8900_REG_ADDCTL_BIAS_SRC |
+				     WM8900_REG_ADDCTL_VMID_SOFTST);
+
+			/* VMID 2x50k */
+			wm8900_write(codec, WM8900_REG_POWER1,
+				     WM8900_REG_POWER1_STARTUP_BIAS_ENA | 0x1);
+
+			/* Allow capacitors to charge */
+			schedule_timeout_interruptible(msecs_to_jiffies(400));
+
+			/* Enable bias */
+			wm8900_write(codec, WM8900_REG_POWER1,
+				     WM8900_REG_POWER1_STARTUP_BIAS_ENA |
+				     WM8900_REG_POWER1_BIAS_ENA | 0x1);
+
+			wm8900_write(codec, WM8900_REG_ADDCTL, 0);
+
+			wm8900_write(codec, WM8900_REG_POWER1,
+				     WM8900_REG_POWER1_BIAS_ENA | 0x1);
+		}
+
+		reg = wm8900_read(codec, WM8900_REG_POWER1);
+		wm8900_write(codec, WM8900_REG_POWER1,
+			     (reg & WM8900_REG_POWER1_FLL_ENA) |
+			     WM8900_REG_POWER1_BIAS_ENA | 0x1);
+		wm8900_write(codec, WM8900_REG_POWER2,
+			     WM8900_REG_POWER2_SYSCLK_ENA);
+		wm8900_write(codec, WM8900_REG_POWER3, 0);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		/* Startup bias enable */
+		reg = wm8900_read(codec, WM8900_REG_POWER1);
+		wm8900_write(codec, WM8900_REG_POWER1,
+			     reg & WM8900_REG_POWER1_STARTUP_BIAS_ENA);
+		wm8900_write(codec, WM8900_REG_ADDCTL,
+			     WM8900_REG_ADDCTL_BIAS_SRC |
+			     WM8900_REG_ADDCTL_VMID_SOFTST);
+
+		/* Discharge caps */
+		wm8900_write(codec, WM8900_REG_POWER1,
+			     WM8900_REG_POWER1_STARTUP_BIAS_ENA);
+		schedule_timeout_interruptible(msecs_to_jiffies(500));
+
+		/* Remove clamp */
+		wm8900_write(codec, WM8900_REG_HPCTL1, 0);
+
+		/* Power down */
+		wm8900_write(codec, WM8900_REG_ADDCTL, 0);
+		wm8900_write(codec, WM8900_REG_POWER1, 0);
+		wm8900_write(codec, WM8900_REG_POWER2, 0);
+		wm8900_write(codec, WM8900_REG_POWER3, 0);
+
+		/* Need to let things settle before stopping the clock
+		 * to ensure that restart works, see "Stopping the
+		 * master clock" in the datasheet. */
+		schedule_timeout_interruptible(msecs_to_jiffies(1));
+		wm8900_write(codec, WM8900_REG_POWER2,
+			     WM8900_REG_POWER2_SYSCLK_ENA);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+static int wm8900_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+	struct wm8900_priv *wm8900 = codec->private_data;
+	int fll_out = wm8900->fll_out;
+	int fll_in  = wm8900->fll_in;
+	int ret;
+
+	/* Stop the FLL in an orderly fashion */
+	ret = wm8900_set_fll(codec, 0, 0, 0);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to stop FLL\n");
+		return ret;
+	}
+
+	wm8900->fll_out = fll_out;
+	wm8900->fll_in = fll_in;
+
+	wm8900_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int wm8900_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+	struct wm8900_priv *wm8900 = codec->private_data;
+	u16 *cache;
+	int i, ret;
+
+	cache = kmemdup(codec->reg_cache, sizeof(wm8900_reg_defaults),
+			GFP_KERNEL);
+
+	wm8900_reset(codec);
+	wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Restart the FLL? */
+	if (wm8900->fll_out) {
+		int fll_out = wm8900->fll_out;
+		int fll_in  = wm8900->fll_in;
+
+		wm8900->fll_in = 0;
+		wm8900->fll_out = 0;
+
+		ret = wm8900_set_fll(codec, 0, fll_in, fll_out);
+		if (ret != 0) {
+			dev_err(&pdev->dev, "Failed to restart FLL\n");
+			return ret;
+		}
+	}
+
+	if (cache) {
+		for (i = 0; i < WM8900_MAXREG; i++)
+			wm8900_write(codec, i, cache[i]);
+		kfree(cache);
+	} else
+		dev_err(&pdev->dev, "Unable to allocate register cache\n");
+
+	return 0;
+}
+
+/*
+ * initialise the WM8900 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int wm8900_init(struct snd_soc_device *socdev)
+{
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret = 0;
+	unsigned int reg;
+	struct i2c_client *i2c_client = socdev->codec->control_data;
+
+	codec->name = "WM8900";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8900_read;
+	codec->write = wm8900_write;
+	codec->dai = &wm8900_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8900_MAXREG;
+	codec->reg_cache = kmemdup(wm8900_reg_defaults,
+				   sizeof(wm8900_reg_defaults), GFP_KERNEL);
+
+	if (codec->reg_cache == NULL)
+		return -ENOMEM;
+
+	reg = wm8900_read(codec, WM8900_REG_ID);
+	if (reg != 0x8900) {
+		dev_err(&i2c_client->dev, "Device is not a WM8900 - ID %x\n",
+			reg);
+		return -ENODEV;
+	}
+
+	codec->private_data = kzalloc(sizeof(struct wm8900_priv), GFP_KERNEL);
+	if (codec->private_data == NULL) {
+		ret = -ENOMEM;
+		goto priv_err;
+	}
+
+	/* Read back from the chip */
+	reg = wm8900_chip_read(codec, WM8900_REG_POWER1);
+	reg = (reg >> 12) & 0xf;
+	dev_info(&i2c_client->dev, "WM8900 revision %d\n", reg);
+
+	wm8900_reset(codec);
+
+	/* Latch the volume update bits */
+	wm8900_write(codec, WM8900_REG_LINVOL,
+		     wm8900_read(codec, WM8900_REG_LINVOL) | 0x100);
+	wm8900_write(codec, WM8900_REG_RINVOL,
+		     wm8900_read(codec, WM8900_REG_RINVOL) | 0x100);
+	wm8900_write(codec, WM8900_REG_LOUT1CTL,
+		     wm8900_read(codec, WM8900_REG_LOUT1CTL) | 0x100);
+	wm8900_write(codec, WM8900_REG_ROUT1CTL,
+		     wm8900_read(codec, WM8900_REG_ROUT1CTL) | 0x100);
+	wm8900_write(codec, WM8900_REG_LOUT2CTL,
+		     wm8900_read(codec, WM8900_REG_LOUT2CTL) | 0x100);
+	wm8900_write(codec, WM8900_REG_ROUT2CTL,
+		     wm8900_read(codec, WM8900_REG_ROUT2CTL) | 0x100);
+	wm8900_write(codec, WM8900_REG_LDAC_DV,
+		     wm8900_read(codec, WM8900_REG_LDAC_DV) | 0x100);
+	wm8900_write(codec, WM8900_REG_RDAC_DV,
+		     wm8900_read(codec, WM8900_REG_RDAC_DV) | 0x100);
+	wm8900_write(codec, WM8900_REG_LADC_DV,
+		     wm8900_read(codec, WM8900_REG_LADC_DV) | 0x100);
+	wm8900_write(codec, WM8900_REG_RADC_DV,
+		     wm8900_read(codec, WM8900_REG_RADC_DV) | 0x100);
+
+	/* Set the DAC and mixer output bias */
+	wm8900_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
+
+	/* Register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "Failed to register new PCMs\n");
+		goto pcm_err;
+	}
+
+	/* Turn the chip on */
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	wm8900_add_controls(codec);
+	wm8900_add_widgets(codec);
+
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		dev_err(&i2c_client->dev, "Failed to register card\n");
+		goto card_err;
+	}
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	kfree(codec->reg_cache);
+priv_err:
+	kfree(codec->private_data);
+	return ret;
+}
+
+static struct snd_soc_device *wm8900_socdev;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+
+static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
+
+/* Magic definition of all other variables and things */
+I2C_CLIENT_INSMOD;
+
+static struct i2c_driver wm8900_i2c_driver;
+static struct i2c_client client_template;
+
+/* If the i2c layer weren't so broken, we could pass this kind of data
+   around */
+static int wm8900_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+{
+	struct snd_soc_device *socdev = wm8900_socdev;
+	struct wm8900_setup_data *setup = socdev->codec_data;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct i2c_client *i2c;
+	int ret;
+
+	if (addr != setup->i2c_address)
+		return -ENODEV;
+
+	dev_err(&adap->dev, "Probe on %x\n", addr);
+
+	client_template.adapter = adap;
+	client_template.addr = addr;
+
+	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
+	if (i2c == NULL) {
+		kfree(codec);
+		return -ENOMEM;
+	}
+	i2c_set_clientdata(i2c, codec);
+	codec->control_data = i2c;
+
+	ret = i2c_attach_client(i2c);
+	if (ret < 0) {
+		dev_err(&adap->dev,
+			"failed to attach codec at addr %x\n", addr);
+		goto err;
+	}
+
+	ret = wm8900_init(socdev);
+	if (ret < 0) {
+		dev_err(&adap->dev, "failed to initialise WM8900\n");
+		goto err;
+	}
+	return ret;
+
+err:
+	kfree(codec);
+	kfree(i2c);
+	return ret;
+}
+
+static int wm8900_i2c_detach(struct i2c_client *client)
+{
+	struct snd_soc_codec *codec = i2c_get_clientdata(client);
+	i2c_detach_client(client);
+	kfree(codec->reg_cache);
+	kfree(client);
+	return 0;
+}
+
+static int wm8900_i2c_attach(struct i2c_adapter *adap)
+{
+	return i2c_probe(adap, &addr_data, wm8900_codec_probe);
+}
+
+/* corgi i2c codec control layer */
+static struct i2c_driver wm8900_i2c_driver = {
+	.driver = {
+		.name = "WM8900 I2C codec",
+		.owner = THIS_MODULE,
+	},
+	.attach_adapter = wm8900_i2c_attach,
+	.detach_client =  wm8900_i2c_detach,
+	.command =        NULL,
+};
+
+static struct i2c_client client_template = {
+	.name =   "WM8900",
+	.driver = &wm8900_i2c_driver,
+};
+#endif
+
+static int wm8900_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct wm8900_setup_data *setup;
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	dev_info(&pdev->dev, "WM8900 Audio Codec\n");
+
+	setup = socdev->codec_data;
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	socdev->codec = codec;
+
+	codec->set_bias_level = wm8900_set_bias_level;
+
+	wm8900_socdev = socdev;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	if (setup->i2c_address) {
+		normal_i2c[0] = setup->i2c_address;
+		codec->hw_write = (hw_write_t)i2c_master_send;
+		ret = i2c_add_driver(&wm8900_i2c_driver);
+		if (ret != 0)
+			printk(KERN_ERR "can't add i2c driver");
+	}
+#else
+#error Non-I2C interfaces not yet supported
+#endif
+	return ret;
+}
+
+/* power down chip */
+static int wm8900_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	if (codec->control_data)
+		wm8900_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8900_i2c_driver);
+#endif
+	kfree(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8900 = {
+	.probe = 	wm8900_probe,
+	.remove = 	wm8900_remove,
+	.suspend = 	wm8900_suspend,
+	.resume =	wm8900_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8900);
+
+MODULE_DESCRIPTION("ASoC WM8900 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8900.h b/sound/soc/codecs/wm8900.h
new file mode 100644
index 0000000..ba450d9
--- /dev/null
+++ b/sound/soc/codecs/wm8900.h
@@ -0,0 +1,64 @@
+/*
+ * wm8900.h  --  WM890 Soc Audio driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8900_H
+#define _WM8900_H
+
+#define WM8900_FLL 1
+
+#define WM8900_BCLK_DIV   1
+#define WM8900_ADC_CLKDIV 2
+#define WM8900_DAC_CLKDIV 3
+#define WM8900_ADC_LRCLK  4
+#define WM8900_DAC_LRCLK  5
+#define WM8900_OPCLK_DIV  6
+#define WM8900_LRCLK_MODE 7
+
+#define WM8900_BCLK_DIV_1   0x00
+#define WM8900_BCLK_DIV_1_5 0x02
+#define WM8900_BCLK_DIV_2   0x04
+#define WM8900_BCLK_DIV_3   0x06
+#define WM8900_BCLK_DIV_4   0x08
+#define WM8900_BCLK_DIV_5_5 0x0a
+#define WM8900_BCLK_DIV_6   0x0c
+#define WM8900_BCLK_DIV_8   0x0e
+#define WM8900_BCLK_DIV_11  0x10
+#define WM8900_BCLK_DIV_12  0x12
+#define WM8900_BCLK_DIV_16  0x14
+#define WM8900_BCLK_DIV_22  0x16
+#define WM8900_BCLK_DIV_24  0x18
+#define WM8900_BCLK_DIV_32  0x1a
+#define WM8900_BCLK_DIV_44  0x1c
+#define WM8900_BCLK_DIV_48  0x1e
+
+#define WM8900_ADC_CLKDIV_1   0x00
+#define WM8900_ADC_CLKDIV_1_5 0x20
+#define WM8900_ADC_CLKDIV_2   0x40
+#define WM8900_ADC_CLKDIV_3   0x60
+#define WM8900_ADC_CLKDIV_4   0x80
+#define WM8900_ADC_CLKDIV_5_5 0xa0
+#define WM8900_ADC_CLKDIV_6   0xc0
+
+#define WM8900_DAC_CLKDIV_1   0x00
+#define WM8900_DAC_CLKDIV_1_5 0x04
+#define WM8900_DAC_CLKDIV_2   0x08
+#define WM8900_DAC_CLKDIV_3   0x0c
+#define WM8900_DAC_CLKDIV_4   0x10
+#define WM8900_DAC_CLKDIV_5_5 0x14
+#define WM8900_DAC_CLKDIV_6   0x18
+
+#define WM8900_
+
+struct wm8900_setup_data {
+	unsigned short i2c_address;
+};
+
+extern struct snd_soc_dai wm8900_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8900;
+
+#endif
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
new file mode 100644
index 0000000..a3f54ec
--- /dev/null
+++ b/sound/soc/codecs/wm8903.c
@@ -0,0 +1,1813 @@
+/*
+ * wm8903.c  --  WM8903 ALSA SoC Audio driver
+ *
+ * Copyright 2008 Wolfson Microelectronics
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO:
+ *  - TDM mode configuration.
+ *  - Mic detect.
+ *  - Digital microphone support.
+ *  - Interrupt support (mic detect and sequencer).
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "wm8903.h"
+
+struct wm8903_priv {
+	int sysclk;
+
+	/* Reference counts */
+	int charge_pump_users;
+	int class_w_users;
+	int playback_active;
+	int capture_active;
+
+	struct snd_pcm_substream *master_substream;
+	struct snd_pcm_substream *slave_substream;
+};
+
+/* Register defaults at reset */
+static u16 wm8903_reg_defaults[] = {
+	0x8903,     /* R0   - SW Reset and ID */
+	0x0000,     /* R1   - Revision Number */
+	0x0000,     /* R2 */
+	0x0000,     /* R3 */
+	0x0018,     /* R4   - Bias Control 0 */
+	0x0000,     /* R5   - VMID Control 0 */
+	0x0000,     /* R6   - Mic Bias Control 0 */
+	0x0000,     /* R7 */
+	0x0001,     /* R8   - Analogue DAC 0 */
+	0x0000,     /* R9 */
+	0x0001,     /* R10  - Analogue ADC 0 */
+	0x0000,     /* R11 */
+	0x0000,     /* R12  - Power Management 0 */
+	0x0000,     /* R13  - Power Management 1 */
+	0x0000,     /* R14  - Power Management 2 */
+	0x0000,     /* R15  - Power Management 3 */
+	0x0000,     /* R16  - Power Management 4 */
+	0x0000,     /* R17  - Power Management 5 */
+	0x0000,     /* R18  - Power Management 6 */
+	0x0000,     /* R19 */
+	0x0400,     /* R20  - Clock Rates 0 */
+	0x0D07,     /* R21  - Clock Rates 1 */
+	0x0000,     /* R22  - Clock Rates 2 */
+	0x0000,     /* R23 */
+	0x0050,     /* R24  - Audio Interface 0 */
+	0x0242,     /* R25  - Audio Interface 1 */
+	0x0008,     /* R26  - Audio Interface 2 */
+	0x0022,     /* R27  - Audio Interface 3 */
+	0x0000,     /* R28 */
+	0x0000,     /* R29 */
+	0x00C0,     /* R30  - DAC Digital Volume Left */
+	0x00C0,     /* R31  - DAC Digital Volume Right */
+	0x0000,     /* R32  - DAC Digital 0 */
+	0x0000,     /* R33  - DAC Digital 1 */
+	0x0000,     /* R34 */
+	0x0000,     /* R35 */
+	0x00C0,     /* R36  - ADC Digital Volume Left */
+	0x00C0,     /* R37  - ADC Digital Volume Right */
+	0x0000,     /* R38  - ADC Digital 0 */
+	0x0073,     /* R39  - Digital Microphone 0 */
+	0x09BF,     /* R40  - DRC 0 */
+	0x3241,     /* R41  - DRC 1 */
+	0x0020,     /* R42  - DRC 2 */
+	0x0000,     /* R43  - DRC 3 */
+	0x0085,     /* R44  - Analogue Left Input 0 */
+	0x0085,     /* R45  - Analogue Right Input 0 */
+	0x0044,     /* R46  - Analogue Left Input 1 */
+	0x0044,     /* R47  - Analogue Right Input 1 */
+	0x0000,     /* R48 */
+	0x0000,     /* R49 */
+	0x0008,     /* R50  - Analogue Left Mix 0 */
+	0x0004,     /* R51  - Analogue Right Mix 0 */
+	0x0000,     /* R52  - Analogue Spk Mix Left 0 */
+	0x0000,     /* R53  - Analogue Spk Mix Left 1 */
+	0x0000,     /* R54  - Analogue Spk Mix Right 0 */
+	0x0000,     /* R55  - Analogue Spk Mix Right 1 */
+	0x0000,     /* R56 */
+	0x002D,     /* R57  - Analogue OUT1 Left */
+	0x002D,     /* R58  - Analogue OUT1 Right */
+	0x0039,     /* R59  - Analogue OUT2 Left */
+	0x0039,     /* R60  - Analogue OUT2 Right */
+	0x0100,     /* R61 */
+	0x0139,     /* R62  - Analogue OUT3 Left */
+	0x0139,     /* R63  - Analogue OUT3 Right */
+	0x0000,     /* R64 */
+	0x0000,     /* R65  - Analogue SPK Output Control 0 */
+	0x0000,     /* R66 */
+	0x0010,     /* R67  - DC Servo 0 */
+	0x0100,     /* R68 */
+	0x00A4,     /* R69  - DC Servo 2 */
+	0x0807,     /* R70 */
+	0x0000,     /* R71 */
+	0x0000,     /* R72 */
+	0x0000,     /* R73 */
+	0x0000,     /* R74 */
+	0x0000,     /* R75 */
+	0x0000,     /* R76 */
+	0x0000,     /* R77 */
+	0x0000,     /* R78 */
+	0x000E,     /* R79 */
+	0x0000,     /* R80 */
+	0x0000,     /* R81 */
+	0x0000,     /* R82 */
+	0x0000,     /* R83 */
+	0x0000,     /* R84 */
+	0x0000,     /* R85 */
+	0x0000,     /* R86 */
+	0x0006,     /* R87 */
+	0x0000,     /* R88 */
+	0x0000,     /* R89 */
+	0x0000,     /* R90  - Analogue HP 0 */
+	0x0060,     /* R91 */
+	0x0000,     /* R92 */
+	0x0000,     /* R93 */
+	0x0000,     /* R94  - Analogue Lineout 0 */
+	0x0060,     /* R95 */
+	0x0000,     /* R96 */
+	0x0000,     /* R97 */
+	0x0000,     /* R98  - Charge Pump 0 */
+	0x1F25,     /* R99 */
+	0x2B19,     /* R100 */
+	0x01C0,     /* R101 */
+	0x01EF,     /* R102 */
+	0x2B00,     /* R103 */
+	0x0000,     /* R104 - Class W 0 */
+	0x01C0,     /* R105 */
+	0x1C10,     /* R106 */
+	0x0000,     /* R107 */
+	0x0000,     /* R108 - Write Sequencer 0 */
+	0x0000,     /* R109 - Write Sequencer 1 */
+	0x0000,     /* R110 - Write Sequencer 2 */
+	0x0000,     /* R111 - Write Sequencer 3 */
+	0x0000,     /* R112 - Write Sequencer 4 */
+	0x0000,     /* R113 */
+	0x0000,     /* R114 - Control Interface */
+	0x0000,     /* R115 */
+	0x00A8,     /* R116 - GPIO Control 1 */
+	0x00A8,     /* R117 - GPIO Control 2 */
+	0x00A8,     /* R118 - GPIO Control 3 */
+	0x0220,     /* R119 - GPIO Control 4 */
+	0x01A0,     /* R120 - GPIO Control 5 */
+	0x0000,     /* R121 - Interrupt Status 1 */
+	0xFFFF,     /* R122 - Interrupt Status 1 Mask */
+	0x0000,     /* R123 - Interrupt Polarity 1 */
+	0x0000,     /* R124 */
+	0x0003,     /* R125 */
+	0x0000,     /* R126 - Interrupt Control */
+	0x0000,     /* R127 */
+	0x0005,     /* R128 */
+	0x0000,     /* R129 - Control Interface Test 1 */
+	0x0000,     /* R130 */
+	0x0000,     /* R131 */
+	0x0000,     /* R132 */
+	0x0000,     /* R133 */
+	0x0000,     /* R134 */
+	0x03FF,     /* R135 */
+	0x0007,     /* R136 */
+	0x0040,     /* R137 */
+	0x0000,     /* R138 */
+	0x0000,     /* R139 */
+	0x0000,     /* R140 */
+	0x0000,     /* R141 */
+	0x0000,     /* R142 */
+	0x0000,     /* R143 */
+	0x0000,     /* R144 */
+	0x0000,     /* R145 */
+	0x0000,     /* R146 */
+	0x0000,     /* R147 */
+	0x4000,     /* R148 */
+	0x6810,     /* R149 - Charge Pump Test 1 */
+	0x0004,     /* R150 */
+	0x0000,     /* R151 */
+	0x0000,     /* R152 */
+	0x0000,     /* R153 */
+	0x0000,     /* R154 */
+	0x0000,     /* R155 */
+	0x0000,     /* R156 */
+	0x0000,     /* R157 */
+	0x0000,     /* R158 */
+	0x0000,     /* R159 */
+	0x0000,     /* R160 */
+	0x0000,     /* R161 */
+	0x0000,     /* R162 */
+	0x0000,     /* R163 */
+	0x0028,     /* R164 - Clock Rate Test 4 */
+	0x0004,     /* R165 */
+	0x0000,     /* R166 */
+	0x0060,     /* R167 */
+	0x0000,     /* R168 */
+	0x0000,     /* R169 */
+	0x0000,     /* R170 */
+	0x0000,     /* R171 */
+	0x0000,     /* R172 - Analogue Output Bias 0 */
+};
+
+static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
+						 unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+
+	BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
+
+	return cache[reg];
+}
+
+static unsigned int wm8903_hw_read(struct snd_soc_codec *codec, u8 reg)
+{
+	struct i2c_msg xfer[2];
+	u16 data;
+	int ret;
+	struct i2c_client *client = codec->control_data;
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 1;
+	xfer[0].buf = &reg;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = 2;
+	xfer[1].buf = (u8 *)&data;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret != 2) {
+		pr_err("i2c_transfer returned %d\n", ret);
+		return 0;
+	}
+
+	return (data >> 8) | ((data & 0xff) << 8);
+}
+
+static unsigned int wm8903_read(struct snd_soc_codec *codec,
+				unsigned int reg)
+{
+	switch (reg) {
+	case WM8903_SW_RESET_AND_ID:
+	case WM8903_REVISION_NUMBER:
+	case WM8903_INTERRUPT_STATUS_1:
+	case WM8903_WRITE_SEQUENCER_4:
+		return wm8903_hw_read(codec, reg);
+
+	default:
+		return wm8903_read_reg_cache(codec, reg);
+	}
+}
+
+static void wm8903_write_reg_cache(struct snd_soc_codec *codec,
+				   u16 reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+
+	BUG_ON(reg >= ARRAY_SIZE(wm8903_reg_defaults));
+
+	switch (reg) {
+	case WM8903_SW_RESET_AND_ID:
+	case WM8903_REVISION_NUMBER:
+		break;
+
+	default:
+		cache[reg] = value;
+		break;
+	}
+}
+
+static int wm8903_write(struct snd_soc_codec *codec, unsigned int reg,
+			unsigned int value)
+{
+	u8 data[3];
+
+	wm8903_write_reg_cache(codec, reg, value);
+
+	/* Data format is 1 byte of address followed by 2 bytes of data */
+	data[0] = reg;
+	data[1] = (value >> 8) & 0xff;
+	data[2] = value & 0xff;
+
+	if (codec->hw_write(codec->control_data, data, 3) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
+{
+	u16 reg[5];
+	struct i2c_client *i2c = codec->control_data;
+
+	BUG_ON(start > 48);
+
+	/* Enable the sequencer */
+	reg[0] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_0);
+	reg[0] |= WM8903_WSEQ_ENA;
+	wm8903_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
+
+	dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
+
+	wm8903_write(codec, WM8903_WRITE_SEQUENCER_3,
+		     start | WM8903_WSEQ_START);
+
+	/* Wait for it to complete.  If we have the interrupt wired up then
+	 * we could block waiting for an interrupt, though polling may still
+	 * be desirable for diagnostic purposes.
+	 */
+	do {
+		msleep(10);
+
+		reg[4] = wm8903_read(codec, WM8903_WRITE_SEQUENCER_4);
+	} while (reg[4] & WM8903_WSEQ_BUSY);
+
+	dev_dbg(&i2c->dev, "Sequence complete\n");
+
+	/* Disable the sequencer again */
+	wm8903_write(codec, WM8903_WRITE_SEQUENCER_0,
+		     reg[0] & ~WM8903_WSEQ_ENA);
+
+	return 0;
+}
+
+static void wm8903_sync_reg_cache(struct snd_soc_codec *codec, u16 *cache)
+{
+	int i;
+
+	/* There really ought to be something better we can do here :/ */
+	for (i = 0; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
+		cache[i] = wm8903_hw_read(codec, i);
+}
+
+static void wm8903_reset(struct snd_soc_codec *codec)
+{
+	wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+}
+
+#define WM8903_OUTPUT_SHORT 0x8
+#define WM8903_OUTPUT_OUT   0x4
+#define WM8903_OUTPUT_INT   0x2
+#define WM8903_OUTPUT_IN    0x1
+
+/*
+ * Event for headphone and line out amplifier power changes.  Special
+ * power up/down sequences are required in order to maximise pop/click
+ * performance.
+ */
+static int wm8903_output_event(struct snd_soc_dapm_widget *w,
+			       struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	struct wm8903_priv *wm8903 = codec->private_data;
+	struct i2c_client *i2c = codec->control_data;
+	u16 val;
+	u16 reg;
+	int shift;
+	u16 cp_reg = wm8903_read(codec, WM8903_CHARGE_PUMP_0);
+
+	switch (w->reg) {
+	case WM8903_POWER_MANAGEMENT_2:
+		reg = WM8903_ANALOGUE_HP_0;
+		break;
+	case WM8903_POWER_MANAGEMENT_3:
+		reg = WM8903_ANALOGUE_LINEOUT_0;
+		break;
+	default:
+		BUG();
+	}
+
+	switch (w->shift) {
+	case 0:
+		shift = 0;
+		break;
+	case 1:
+		shift = 4;
+		break;
+	default:
+		BUG();
+	}
+
+	if (event & SND_SOC_DAPM_PRE_PMU) {
+		val = wm8903_read(codec, reg);
+
+		/* Short the output */
+		val &= ~(WM8903_OUTPUT_SHORT << shift);
+		wm8903_write(codec, reg, val);
+
+		wm8903->charge_pump_users++;
+
+		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
+			wm8903->charge_pump_users);
+
+		if (wm8903->charge_pump_users == 1) {
+			dev_dbg(&i2c->dev, "Enabling charge pump\n");
+			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
+				     cp_reg | WM8903_CP_ENA);
+			mdelay(4);
+		}
+	}
+
+	if (event & SND_SOC_DAPM_POST_PMU) {
+		val = wm8903_read(codec, reg);
+
+		val |= (WM8903_OUTPUT_IN << shift);
+		wm8903_write(codec, reg, val);
+
+		val |= (WM8903_OUTPUT_INT << shift);
+		wm8903_write(codec, reg, val);
+
+		/* Turn on the output ENA_OUTP */
+		val |= (WM8903_OUTPUT_OUT << shift);
+		wm8903_write(codec, reg, val);
+
+		/* Remove the short */
+		val |= (WM8903_OUTPUT_SHORT << shift);
+		wm8903_write(codec, reg, val);
+	}
+
+	if (event & SND_SOC_DAPM_PRE_PMD) {
+		val = wm8903_read(codec, reg);
+
+		/* Short the output */
+		val &= ~(WM8903_OUTPUT_SHORT << shift);
+		wm8903_write(codec, reg, val);
+
+		/* Then disable the intermediate and output stages */
+		val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
+			  WM8903_OUTPUT_IN) << shift);
+		wm8903_write(codec, reg, val);
+	}
+
+	if (event & SND_SOC_DAPM_POST_PMD) {
+		wm8903->charge_pump_users--;
+
+		dev_dbg(&i2c->dev, "Charge pump use count now %d\n",
+			wm8903->charge_pump_users);
+
+		if (wm8903->charge_pump_users == 0) {
+			dev_dbg(&i2c->dev, "Disabling charge pump\n");
+			wm8903_write(codec, WM8903_CHARGE_PUMP_0,
+				     cp_reg & ~WM8903_CP_ENA);
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * When used with DAC outputs only the WM8903 charge pump supports
+ * operation in class W mode, providing very low power consumption
+ * when used with digital sources.  Enable and disable this mode
+ * automatically depending on the mixer configuration.
+ *
+ * All the relevant controls are simple switches.
+ */
+static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_codec *codec = widget->codec;
+	struct wm8903_priv *wm8903 = codec->private_data;
+	struct i2c_client *i2c = codec->control_data;
+	u16 reg;
+	int ret;
+
+	reg = wm8903_read(codec, WM8903_CLASS_W_0);
+
+	/* Turn it off if we're about to enable bypass */
+	if (ucontrol->value.integer.value[0]) {
+		if (wm8903->class_w_users == 0) {
+			dev_dbg(&i2c->dev, "Disabling Class W\n");
+			wm8903_write(codec, WM8903_CLASS_W_0, reg &
+				     ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
+		}
+		wm8903->class_w_users++;
+	}
+
+	/* Implement the change */
+	ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
+
+	/* If we've just disabled the last bypass path turn Class W on */
+	if (!ucontrol->value.integer.value[0]) {
+		if (wm8903->class_w_users == 1) {
+			dev_dbg(&i2c->dev, "Enabling Class W\n");
+			wm8903_write(codec, WM8903_CLASS_W_0, reg |
+				     WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
+		}
+		wm8903->class_w_users--;
+	}
+
+	dev_dbg(&i2c->dev, "Bypass use count now %d\n",
+		wm8903->class_w_users);
+
+	return ret;
+}
+
+#define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_volsw, \
+	.get = snd_soc_dapm_get_volsw, .put = wm8903_class_w_put, \
+	.private_value =  SOC_SINGLE_VALUE(reg, shift, max, invert) }
+
+
+/* ALSA can only do steps of .01dB */
+static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
+
+static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
+
+static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0);
+static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0);
+
+static const char *drc_slope_text[] = {
+	"1", "1/2", "1/4", "1/8", "1/16", "0"
+};
+
+static const struct soc_enum drc_slope_r0 =
+	SOC_ENUM_SINGLE(WM8903_DRC_2, 3, 6, drc_slope_text);
+
+static const struct soc_enum drc_slope_r1 =
+	SOC_ENUM_SINGLE(WM8903_DRC_2, 0, 6, drc_slope_text);
+
+static const char *drc_attack_text[] = {
+	"instantaneous",
+	"363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms",
+	"46.4ms", "92.8ms", "185.6ms"
+};
+
+static const struct soc_enum drc_attack =
+	SOC_ENUM_SINGLE(WM8903_DRC_1, 12, 11, drc_attack_text);
+
+static const char *drc_decay_text[] = {
+	"186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s",
+	"23.87s", "47.56s"
+};
+
+static const struct soc_enum drc_decay =
+	SOC_ENUM_SINGLE(WM8903_DRC_1, 8, 9, drc_decay_text);
+
+static const char *drc_ff_delay_text[] = {
+	"5 samples", "9 samples"
+};
+
+static const struct soc_enum drc_ff_delay =
+	SOC_ENUM_SINGLE(WM8903_DRC_0, 5, 2, drc_ff_delay_text);
+
+static const char *drc_qr_decay_text[] = {
+	"0.725ms", "1.45ms", "5.8ms"
+};
+
+static const struct soc_enum drc_qr_decay =
+	SOC_ENUM_SINGLE(WM8903_DRC_1, 4, 3, drc_qr_decay_text);
+
+static const char *drc_smoothing_text[] = {
+	"Low", "Medium", "High"
+};
+
+static const struct soc_enum drc_smoothing =
+	SOC_ENUM_SINGLE(WM8903_DRC_0, 11, 3, drc_smoothing_text);
+
+static const char *soft_mute_text[] = {
+	"Fast (fs/2)", "Slow (fs/32)"
+};
+
+static const struct soc_enum soft_mute =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 10, 2, soft_mute_text);
+
+static const char *mute_mode_text[] = {
+	"Hard", "Soft"
+};
+
+static const struct soc_enum mute_mode =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 9, 2, mute_mode_text);
+
+static const char *dac_deemphasis_text[] = {
+	"Disabled", "32kHz", "44.1kHz", "48kHz"
+};
+
+static const struct soc_enum dac_deemphasis =
+	SOC_ENUM_SINGLE(WM8903_DAC_DIGITAL_1, 1, 4, dac_deemphasis_text);
+
+static const char *companding_text[] = {
+	"ulaw", "alaw"
+};
+
+static const struct soc_enum dac_companding =
+	SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 0, 2, companding_text);
+
+static const struct soc_enum adc_companding =
+	SOC_ENUM_SINGLE(WM8903_AUDIO_INTERFACE_0, 2, 2, companding_text);
+
+static const char *input_mode_text[] = {
+	"Single-Ended", "Differential Line", "Differential Mic"
+};
+
+static const struct soc_enum linput_mode_enum =
+	SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text);
+
+static const struct soc_enum rinput_mode_enum =
+	SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text);
+
+static const char *linput_mux_text[] = {
+	"IN1L", "IN2L", "IN3L"
+};
+
+static const struct soc_enum linput_enum =
+	SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 2, 3, linput_mux_text);
+
+static const struct soc_enum linput_inv_enum =
+	SOC_ENUM_SINGLE(WM8903_ANALOGUE_LEFT_INPUT_1, 4, 3, linput_mux_text);
+
+static const char *rinput_mux_text[] = {
+	"IN1R", "IN2R", "IN3R"
+};
+
+static const struct soc_enum rinput_enum =
+	SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 2, 3, rinput_mux_text);
+
+static const struct soc_enum rinput_inv_enum =
+	SOC_ENUM_SINGLE(WM8903_ANALOGUE_RIGHT_INPUT_1, 4, 3, rinput_mux_text);
+
+
+static const struct snd_kcontrol_new wm8903_snd_controls[] = {
+
+/* Input PGAs - No TLV since the scale depends on PGA mode */
+SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0,
+	   7, 1, 0),
+SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0,
+	   0, 31, 0),
+SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1,
+	   6, 1, 0),
+
+SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0,
+	   7, 1, 0),
+SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0,
+	   0, 31, 0),
+SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1,
+	   6, 1, 0),
+
+/* ADCs */
+SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
+SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
+SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
+SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8903_DRC_3, 5, 124, 1,
+	       drc_tlv_thresh),
+SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
+SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
+SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max),
+SOC_ENUM("DRC Attack Rate", drc_attack),
+SOC_ENUM("DRC Decay Rate", drc_decay),
+SOC_ENUM("DRC FF Delay", drc_ff_delay),
+SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
+SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
+SOC_SINGLE_TLV("DRC QR Threashold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
+SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
+SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
+SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
+SOC_ENUM("DRC Smoothing Threashold", drc_smoothing),
+SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
+
+SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
+		 WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
+SOC_ENUM("ADC Companding Mode", adc_companding),
+SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
+
+/* DAC */
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
+		 WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
+SOC_ENUM("DAC Soft Mute Rate", soft_mute),
+SOC_ENUM("DAC Mute Mode", mute_mode),
+SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
+SOC_ENUM("DAC De-emphasis", dac_deemphasis),
+SOC_SINGLE("DAC Sloping Stopband Filter Switch",
+	   WM8903_DAC_DIGITAL_1, 11, 1, 0),
+SOC_ENUM("DAC Companding Mode", dac_companding),
+SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
+
+/* Headphones */
+SOC_DOUBLE_R("Headphone Switch",
+	     WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
+	     8, 1, 1),
+SOC_DOUBLE_R("Headphone ZC Switch",
+	     WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
+	     6, 1, 0),
+SOC_DOUBLE_R_TLV("Headphone Volume",
+		 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
+		 0, 63, 0, out_tlv),
+
+/* Line out */
+SOC_DOUBLE_R("Line Out Switch",
+	     WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
+	     8, 1, 1),
+SOC_DOUBLE_R("Line Out ZC Switch",
+	     WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
+	     6, 1, 0),
+SOC_DOUBLE_R_TLV("Line Out Volume",
+		 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
+		 0, 63, 0, out_tlv),
+
+/* Speaker */
+SOC_DOUBLE_R("Speaker Switch",
+	     WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1),
+SOC_DOUBLE_R("Speaker ZC Switch",
+	     WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0),
+SOC_DOUBLE_R_TLV("Speaker Volume",
+		 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT,
+		 0, 63, 0, out_tlv),
+};
+
+static int wm8903_add_controls(struct snd_soc_codec *codec)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm8903_snd_controls); i++) {
+		err = snd_ctl_add(codec->card,
+				  snd_soc_cnew(&wm8903_snd_controls[i],
+					       codec, NULL));
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static const struct snd_kcontrol_new linput_mode_mux =
+	SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
+
+static const struct snd_kcontrol_new rinput_mode_mux =
+	SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum);
+
+static const struct snd_kcontrol_new linput_mux =
+	SOC_DAPM_ENUM("Left Input Mux", linput_enum);
+
+static const struct snd_kcontrol_new linput_inv_mux =
+	SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum);
+
+static const struct snd_kcontrol_new rinput_mux =
+	SOC_DAPM_ENUM("Right Input Mux", rinput_enum);
+
+static const struct snd_kcontrol_new rinput_inv_mux =
+	SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
+
+static const struct snd_kcontrol_new left_output_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
+SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_output_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
+SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
+};
+
+static const struct snd_kcontrol_new left_speaker_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
+		1, 1, 0),
+};
+
+static const struct snd_kcontrol_new right_speaker_mixer[] = {
+SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0),
+SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
+		1, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
+		1, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
+SND_SOC_DAPM_INPUT("IN1L"),
+SND_SOC_DAPM_INPUT("IN1R"),
+SND_SOC_DAPM_INPUT("IN2L"),
+SND_SOC_DAPM_INPUT("IN2R"),
+SND_SOC_DAPM_INPUT("IN3L"),
+SND_SOC_DAPM_INPUT("IN3R"),
+
+SND_SOC_DAPM_OUTPUT("HPOUTL"),
+SND_SOC_DAPM_OUTPUT("HPOUTR"),
+SND_SOC_DAPM_OUTPUT("LINEOUTL"),
+SND_SOC_DAPM_OUTPUT("LINEOUTR"),
+SND_SOC_DAPM_OUTPUT("LOP"),
+SND_SOC_DAPM_OUTPUT("LON"),
+SND_SOC_DAPM_OUTPUT("ROP"),
+SND_SOC_DAPM_OUTPUT("RON"),
+
+SND_SOC_DAPM_MICBIAS("Mic Bias", WM8903_MIC_BIAS_CONTROL_0, 0, 0),
+
+SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
+SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
+		 &linput_inv_mux),
+SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux),
+
+SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux),
+SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0,
+		 &rinput_inv_mux),
+SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux),
+
+SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
+
+SND_SOC_DAPM_ADC("ADCL", "Left HiFi Capture", WM8903_POWER_MANAGEMENT_6, 1, 0),
+SND_SOC_DAPM_ADC("ADCR", "Right HiFi Capture", WM8903_POWER_MANAGEMENT_6, 0, 0),
+
+SND_SOC_DAPM_DAC("DACL", "Left Playback", WM8903_POWER_MANAGEMENT_6, 3, 0),
+SND_SOC_DAPM_DAC("DACR", "Right Playback", WM8903_POWER_MANAGEMENT_6, 2, 0),
+
+SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0,
+		   left_output_mixer, ARRAY_SIZE(left_output_mixer)),
+SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0,
+		   right_output_mixer, ARRAY_SIZE(right_output_mixer)),
+
+SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
+		   left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
+SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
+		   right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
+
+SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
+		   1, 0, NULL, 0, wm8903_output_event,
+		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
+		   0, 0, NULL, 0, wm8903_output_event,
+		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
+		   NULL, 0, wm8903_output_event,
+		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
+		   NULL, 0, wm8903_output_event,
+		   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
+		   SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
+
+SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
+		 NULL, 0),
+SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
+		 NULL, 0),
+
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+	{ "Left Input Mux", "IN1L", "IN1L" },
+	{ "Left Input Mux", "IN2L", "IN2L" },
+	{ "Left Input Mux", "IN3L", "IN3L" },
+
+	{ "Left Input Inverting Mux", "IN1L", "IN1L" },
+	{ "Left Input Inverting Mux", "IN2L", "IN2L" },
+	{ "Left Input Inverting Mux", "IN3L", "IN3L" },
+
+	{ "Right Input Mux", "IN1R", "IN1R" },
+	{ "Right Input Mux", "IN2R", "IN2R" },
+	{ "Right Input Mux", "IN3R", "IN3R" },
+
+	{ "Right Input Inverting Mux", "IN1R", "IN1R" },
+	{ "Right Input Inverting Mux", "IN2R", "IN2R" },
+	{ "Right Input Inverting Mux", "IN3R", "IN3R" },
+
+	{ "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" },
+	{ "Left Input Mode Mux", "Differential Line",
+	  "Left Input Mux" },
+	{ "Left Input Mode Mux", "Differential Line",
+	  "Left Input Inverting Mux" },
+	{ "Left Input Mode Mux", "Differential Mic",
+	  "Left Input Mux" },
+	{ "Left Input Mode Mux", "Differential Mic",
+	  "Left Input Inverting Mux" },
+
+	{ "Right Input Mode Mux", "Single-Ended",
+	  "Right Input Inverting Mux" },
+	{ "Right Input Mode Mux", "Differential Line",
+	  "Right Input Mux" },
+	{ "Right Input Mode Mux", "Differential Line",
+	  "Right Input Inverting Mux" },
+	{ "Right Input Mode Mux", "Differential Mic",
+	  "Right Input Mux" },
+	{ "Right Input Mode Mux", "Differential Mic",
+	  "Right Input Inverting Mux" },
+
+	{ "Left Input PGA", NULL, "Left Input Mode Mux" },
+	{ "Right Input PGA", NULL, "Right Input Mode Mux" },
+
+	{ "ADCL", NULL, "Left Input PGA" },
+	{ "ADCR", NULL, "Right Input PGA" },
+
+	{ "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
+	{ "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
+	{ "Left Output Mixer", "DACL Switch", "DACL" },
+	{ "Left Output Mixer", "DACR Switch", "DACR" },
+
+	{ "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" },
+	{ "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" },
+	{ "Right Output Mixer", "DACL Switch", "DACL" },
+	{ "Right Output Mixer", "DACR Switch", "DACR" },
+
+	{ "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
+	{ "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
+	{ "Left Speaker Mixer", "DACL Switch", "DACL" },
+	{ "Left Speaker Mixer", "DACR Switch", "DACR" },
+
+	{ "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
+	{ "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
+	{ "Right Speaker Mixer", "DACL Switch", "DACL" },
+	{ "Right Speaker Mixer", "DACR Switch", "DACR" },
+
+	{ "Left Line Output PGA", NULL, "Left Output Mixer" },
+	{ "Right Line Output PGA", NULL, "Right Output Mixer" },
+
+	{ "Left Headphone Output PGA", NULL, "Left Output Mixer" },
+	{ "Right Headphone Output PGA", NULL, "Right Output Mixer" },
+
+	{ "Left Speaker PGA", NULL, "Left Speaker Mixer" },
+	{ "Right Speaker PGA", NULL, "Right Speaker Mixer" },
+
+	{ "HPOUTL", NULL, "Left Headphone Output PGA" },
+	{ "HPOUTR", NULL, "Right Headphone Output PGA" },
+
+	{ "LINEOUTL", NULL, "Left Line Output PGA" },
+	{ "LINEOUTR", NULL, "Right Line Output PGA" },
+
+	{ "LOP", NULL, "Left Speaker PGA" },
+	{ "LON", NULL, "Left Speaker PGA" },
+
+	{ "ROP", NULL, "Right Speaker PGA" },
+	{ "RON", NULL, "Right Speaker PGA" },
+};
+
+static int wm8903_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8903_dapm_widgets,
+				  ARRAY_SIZE(wm8903_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+	snd_soc_dapm_new_widgets(codec);
+
+	return 0;
+}
+
+static int wm8903_set_bias_level(struct snd_soc_codec *codec,
+				 enum snd_soc_bias_level level)
+{
+	struct i2c_client *i2c = codec->control_data;
+	u16 reg, reg2;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+		reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+		reg &= ~(WM8903_VMID_RES_MASK);
+		reg |= WM8903_VMID_RES_50K;
+		wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+		break;
+
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF) {
+			wm8903_run_sequence(codec, 0);
+			wm8903_sync_reg_cache(codec, codec->reg_cache);
+
+			/* Enable low impedence charge pump output */
+			reg = wm8903_read(codec,
+					  WM8903_CONTROL_INTERFACE_TEST_1);
+			wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+				     reg | WM8903_TEST_KEY);
+			reg2 = wm8903_read(codec, WM8903_CHARGE_PUMP_TEST_1);
+			wm8903_write(codec, WM8903_CHARGE_PUMP_TEST_1,
+				     reg2 | WM8903_CP_SW_KELVIN_MODE_MASK);
+			wm8903_write(codec, WM8903_CONTROL_INTERFACE_TEST_1,
+				     reg);
+
+			/* By default no bypass paths are enabled so
+			 * enable Class W support.
+			 */
+			dev_dbg(&i2c->dev, "Enabling Class W\n");
+			wm8903_write(codec, WM8903_CLASS_W_0, reg |
+				     WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
+		}
+
+		reg = wm8903_read(codec, WM8903_VMID_CONTROL_0);
+		reg &= ~(WM8903_VMID_RES_MASK);
+		reg |= WM8903_VMID_RES_250K;
+		wm8903_write(codec, WM8903_VMID_CONTROL_0, reg);
+		break;
+
+	case SND_SOC_BIAS_OFF:
+		wm8903_run_sequence(codec, 32);
+		break;
+	}
+
+	codec->bias_level = level;
+
+	return 0;
+}
+
+static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+				 int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8903_priv *wm8903 = codec->private_data;
+
+	wm8903->sysclk = freq;
+
+	return 0;
+}
+
+static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			      unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
+
+	aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
+		  WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		aif1 |= WM8903_LRCLK_DIR;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		aif1 |= WM8903_BCLK_DIR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		aif1 |= 0x3;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		aif1 |= 0x3 | WM8903_AIF_LRCLK_INV;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif1 |= 0x2;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		aif1 |= 0x1;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif1 |= WM8903_AIF_BCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif1 |= WM8903_AIF_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif1 |= WM8903_AIF_LRCLK_INV;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+
+	return 0;
+}
+
+static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 reg;
+
+	reg = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+
+	if (mute)
+		reg |= WM8903_DAC_MUTE;
+	else
+		reg &= ~WM8903_DAC_MUTE;
+
+	wm8903_write(codec, WM8903_DAC_DIGITAL_1, reg);
+
+	return 0;
+}
+
+/* Lookup table for CLK_SYS/fs ratio.  256fs or more is recommended
+ * for optimal performance so we list the lower rates first and match
+ * on the last match we find. */
+static struct {
+	int div;
+	int rate;
+	int mode;
+	int mclk_div;
+} clk_sys_ratios[] = {
+	{   64, 0x0, 0x0, 1 },
+	{   68, 0x0, 0x1, 1 },
+	{  125, 0x0, 0x2, 1 },
+	{  128, 0x1, 0x0, 1 },
+	{  136, 0x1, 0x1, 1 },
+	{  192, 0x2, 0x0, 1 },
+	{  204, 0x2, 0x1, 1 },
+
+	{   64, 0x0, 0x0, 2 },
+	{   68, 0x0, 0x1, 2 },
+	{  125, 0x0, 0x2, 2 },
+	{  128, 0x1, 0x0, 2 },
+	{  136, 0x1, 0x1, 2 },
+	{  192, 0x2, 0x0, 2 },
+	{  204, 0x2, 0x1, 2 },
+
+	{  250, 0x2, 0x2, 1 },
+	{  256, 0x3, 0x0, 1 },
+	{  272, 0x3, 0x1, 1 },
+	{  384, 0x4, 0x0, 1 },
+	{  408, 0x4, 0x1, 1 },
+	{  375, 0x4, 0x2, 1 },
+	{  512, 0x5, 0x0, 1 },
+	{  544, 0x5, 0x1, 1 },
+	{  500, 0x5, 0x2, 1 },
+	{  768, 0x6, 0x0, 1 },
+	{  816, 0x6, 0x1, 1 },
+	{  750, 0x6, 0x2, 1 },
+	{ 1024, 0x7, 0x0, 1 },
+	{ 1088, 0x7, 0x1, 1 },
+	{ 1000, 0x7, 0x2, 1 },
+	{ 1408, 0x8, 0x0, 1 },
+	{ 1496, 0x8, 0x1, 1 },
+	{ 1536, 0x9, 0x0, 1 },
+	{ 1632, 0x9, 0x1, 1 },
+	{ 1500, 0x9, 0x2, 1 },
+
+	{  250, 0x2, 0x2, 2 },
+	{  256, 0x3, 0x0, 2 },
+	{  272, 0x3, 0x1, 2 },
+	{  384, 0x4, 0x0, 2 },
+	{  408, 0x4, 0x1, 2 },
+	{  375, 0x4, 0x2, 2 },
+	{  512, 0x5, 0x0, 2 },
+	{  544, 0x5, 0x1, 2 },
+	{  500, 0x5, 0x2, 2 },
+	{  768, 0x6, 0x0, 2 },
+	{  816, 0x6, 0x1, 2 },
+	{  750, 0x6, 0x2, 2 },
+	{ 1024, 0x7, 0x0, 2 },
+	{ 1088, 0x7, 0x1, 2 },
+	{ 1000, 0x7, 0x2, 2 },
+	{ 1408, 0x8, 0x0, 2 },
+	{ 1496, 0x8, 0x1, 2 },
+	{ 1536, 0x9, 0x0, 2 },
+	{ 1632, 0x9, 0x1, 2 },
+	{ 1500, 0x9, 0x2, 2 },
+};
+
+/* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */
+static struct {
+	int ratio;
+	int div;
+} bclk_divs[] = {
+	{  10,  0 },
+	{  15,  1 },
+	{  20,  2 },
+	{  30,  3 },
+	{  40,  4 },
+	{  50,  5 },
+	{  55,  6 },
+	{  60,  7 },
+	{  80,  8 },
+	{ 100,  9 },
+	{ 110, 10 },
+	{ 120, 11 },
+	{ 160, 12 },
+	{ 200, 13 },
+	{ 220, 14 },
+	{ 240, 15 },
+	{ 250, 16 },
+	{ 300, 17 },
+	{ 320, 18 },
+	{ 440, 19 },
+	{ 480, 20 },
+};
+
+/* Sample rates for DSP */
+static struct {
+	int rate;
+	int value;
+} sample_rates[] = {
+	{  8000,  0 },
+	{ 11025,  1 },
+	{ 12000,  2 },
+	{ 16000,  3 },
+	{ 22050,  4 },
+	{ 24000,  5 },
+	{ 32000,  6 },
+	{ 44100,  7 },
+	{ 48000,  8 },
+	{ 88200,  9 },
+	{ 96000, 10 },
+	{ 0,      0 },
+};
+
+static int wm8903_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct wm8903_priv *wm8903 = codec->private_data;
+	struct i2c_client *i2c = codec->control_data;
+	struct snd_pcm_runtime *master_runtime;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		wm8903->playback_active++;
+	else
+		wm8903->capture_active++;
+
+	/* The DAI has shared clocks so if we already have a playback or
+	 * capture going then constrain this substream to match it.
+	 */
+	if (wm8903->master_substream) {
+		master_runtime = wm8903->master_substream->runtime;
+
+		dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
+			master_runtime->sample_bits,
+			master_runtime->rate);
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+					     SNDRV_PCM_HW_PARAM_RATE,
+					     master_runtime->rate,
+					     master_runtime->rate);
+
+		snd_pcm_hw_constraint_minmax(substream->runtime,
+					     SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+					     master_runtime->sample_bits,
+					     master_runtime->sample_bits);
+
+		wm8903->slave_substream = substream;
+	} else
+		wm8903->master_substream = substream;
+
+	return 0;
+}
+
+static void wm8903_shutdown(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct wm8903_priv *wm8903 = codec->private_data;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		wm8903->playback_active--;
+	else
+		wm8903->capture_active--;
+
+	if (wm8903->master_substream == substream)
+		wm8903->master_substream = wm8903->slave_substream;
+
+	wm8903->slave_substream = NULL;
+}
+
+static int wm8903_hw_params(struct snd_pcm_substream *substream,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct wm8903_priv *wm8903 = codec->private_data;
+	struct i2c_client *i2c = codec->control_data;
+	int fs = params_rate(params);
+	int bclk;
+	int bclk_div;
+	int i;
+	int dsp_config;
+	int clk_config;
+	int best_val;
+	int cur_val;
+	int clk_sys;
+
+	u16 aif1 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_1);
+	u16 aif2 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_2);
+	u16 aif3 = wm8903_read(codec, WM8903_AUDIO_INTERFACE_3);
+	u16 clock0 = wm8903_read(codec, WM8903_CLOCK_RATES_0);
+	u16 clock1 = wm8903_read(codec, WM8903_CLOCK_RATES_1);
+
+	if (substream == wm8903->slave_substream) {
+		dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
+		return 0;
+	}
+
+	/* Configure sample rate logic for DSP - choose nearest rate */
+	dsp_config = 0;
+	best_val = abs(sample_rates[dsp_config].rate - fs);
+	for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
+		cur_val = abs(sample_rates[i].rate - fs);
+		if (cur_val <= best_val) {
+			dsp_config = i;
+			best_val = cur_val;
+		}
+	}
+
+	/* Constraints should stop us hitting this but let's make sure */
+	if (wm8903->capture_active)
+		switch (sample_rates[dsp_config].rate) {
+		case 88200:
+		case 96000:
+			dev_err(&i2c->dev, "%dHz unsupported by ADC\n",
+				fs);
+			return -EINVAL;
+
+		default:
+			break;
+		}
+
+	dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
+	clock1 &= ~WM8903_SAMPLE_RATE_MASK;
+	clock1 |= sample_rates[dsp_config].value;
+
+	aif1 &= ~WM8903_AIF_WL_MASK;
+	bclk = 2 * fs;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bclk *= 16;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		bclk *= 20;
+		aif1 |= 0x4;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		bclk *= 24;
+		aif1 |= 0x8;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		bclk *= 32;
+		aif1 |= 0xc;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n",
+		wm8903->sysclk, fs);
+
+	/* We may not have an MCLK which allows us to generate exactly
+	 * the clock we want, particularly with USB derived inputs, so
+	 * approximate.
+	 */
+	clk_config = 0;
+	best_val = abs((wm8903->sysclk /
+			(clk_sys_ratios[0].mclk_div *
+			 clk_sys_ratios[0].div)) - fs);
+	for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) {
+		cur_val = abs((wm8903->sysclk /
+			       (clk_sys_ratios[i].mclk_div *
+				clk_sys_ratios[i].div)) - fs);
+
+		if (cur_val <= best_val) {
+			clk_config = i;
+			best_val = cur_val;
+		}
+	}
+
+	if (clk_sys_ratios[clk_config].mclk_div == 2) {
+		clock0 |= WM8903_MCLKDIV2;
+		clk_sys = wm8903->sysclk / 2;
+	} else {
+		clock0 &= ~WM8903_MCLKDIV2;
+		clk_sys = wm8903->sysclk;
+	}
+
+	clock1 &= ~(WM8903_CLK_SYS_RATE_MASK |
+		    WM8903_CLK_SYS_MODE_MASK);
+	clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
+	clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
+
+	dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
+		clk_sys_ratios[clk_config].rate,
+		clk_sys_ratios[clk_config].mode,
+		clk_sys_ratios[clk_config].div);
+
+	dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
+
+	/* We may not get quite the right frequency if using
+	 * approximate clocks so look for the closest match that is
+	 * higher than the target (we need to ensure that there enough
+	 * BCLKs to clock out the samples).
+	 */
+	bclk_div = 0;
+	best_val = ((clk_sys * 10) / bclk_divs[0].ratio) - bclk;
+	i = 1;
+	while (i < ARRAY_SIZE(bclk_divs)) {
+		cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk;
+		if (cur_val < 0) /* BCLK table is sorted */
+			break;
+		bclk_div = i;
+		best_val = cur_val;
+		i++;
+	}
+
+	aif2 &= ~WM8903_BCLK_DIV_MASK;
+	aif3 &= ~WM8903_LRCLK_RATE_MASK;
+
+	dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
+		bclk_divs[bclk_div].ratio / 10, bclk,
+		(clk_sys * 10) / bclk_divs[bclk_div].ratio);
+
+	aif2 |= bclk_divs[bclk_div].div;
+	aif3 |= bclk / fs;
+
+	wm8903_write(codec, WM8903_CLOCK_RATES_0, clock0);
+	wm8903_write(codec, WM8903_CLOCK_RATES_1, clock1);
+	wm8903_write(codec, WM8903_AUDIO_INTERFACE_1, aif1);
+	wm8903_write(codec, WM8903_AUDIO_INTERFACE_2, aif2);
+	wm8903_write(codec, WM8903_AUDIO_INTERFACE_3, aif3);
+
+	return 0;
+}
+
+#define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
+			       SNDRV_PCM_RATE_11025 |	\
+			       SNDRV_PCM_RATE_16000 |	\
+			       SNDRV_PCM_RATE_22050 |	\
+			       SNDRV_PCM_RATE_32000 |	\
+			       SNDRV_PCM_RATE_44100 |	\
+			       SNDRV_PCM_RATE_48000 |	\
+			       SNDRV_PCM_RATE_88200 |	\
+			       SNDRV_PCM_RATE_96000)
+
+#define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\
+			      SNDRV_PCM_RATE_11025 |	\
+			      SNDRV_PCM_RATE_16000 |	\
+			      SNDRV_PCM_RATE_22050 |	\
+			      SNDRV_PCM_RATE_32000 |	\
+			      SNDRV_PCM_RATE_44100 |	\
+			      SNDRV_PCM_RATE_48000)
+
+#define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+			SNDRV_PCM_FMTBIT_S20_3LE |\
+			SNDRV_PCM_FMTBIT_S24_LE)
+
+struct snd_soc_dai wm8903_dai = {
+	.name = "WM8903",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = WM8903_PLAYBACK_RATES,
+		.formats = WM8903_FORMATS,
+	},
+	.capture = {
+		 .stream_name = "Capture",
+		 .channels_min = 2,
+		 .channels_max = 2,
+		 .rates = WM8903_CAPTURE_RATES,
+		 .formats = WM8903_FORMATS,
+	 },
+	.ops = {
+		 .startup = wm8903_startup,
+		 .shutdown = wm8903_shutdown,
+		 .hw_params = wm8903_hw_params,
+	},
+	.dai_ops = {
+		 .digital_mute = wm8903_digital_mute,
+		 .set_fmt = wm8903_set_dai_fmt,
+		 .set_sysclk = wm8903_set_dai_sysclk
+	}
+};
+EXPORT_SYMBOL_GPL(wm8903_dai);
+
+static int wm8903_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int wm8903_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+	struct i2c_client *i2c = codec->control_data;
+	int i;
+	u16 *reg_cache = codec->reg_cache;
+	u16 *tmp_cache = kmemdup(codec->reg_cache, sizeof(wm8903_reg_defaults),
+				 GFP_KERNEL);
+
+	/* Bring the codec back up to standby first to minimise pop/clicks */
+	wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	wm8903_set_bias_level(codec, codec->suspend_bias_level);
+
+	/* Sync back everything else */
+	if (tmp_cache) {
+		for (i = 2; i < ARRAY_SIZE(wm8903_reg_defaults); i++)
+			if (tmp_cache[i] != reg_cache[i])
+				wm8903_write(codec, i, tmp_cache[i]);
+	} else {
+		dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
+	}
+
+	return 0;
+}
+
+/*
+ * initialise the WM8903 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int wm8903_init(struct snd_soc_device *socdev)
+{
+	struct snd_soc_codec *codec = socdev->codec;
+	struct i2c_client *i2c = codec->control_data;
+	int ret = 0;
+	u16 val;
+
+	val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+	if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
+		dev_err(&i2c->dev,
+			"Device with ID register %x is not a WM8903\n", val);
+		return -ENODEV;
+	}
+
+	codec->name = "WM8903";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8903_read;
+	codec->write = wm8903_write;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8903_set_bias_level;
+	codec->dai = &wm8903_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults);
+	codec->reg_cache = kmemdup(wm8903_reg_defaults,
+				   sizeof(wm8903_reg_defaults),
+				   GFP_KERNEL);
+	if (codec->reg_cache == NULL) {
+		dev_err(&i2c->dev, "Failed to allocate register cache\n");
+		return -ENOMEM;
+	}
+
+	val = wm8903_read(codec, WM8903_REVISION_NUMBER);
+	dev_info(&i2c->dev, "WM8903 revision %d\n",
+		 val & WM8903_CHIP_REV_MASK);
+
+	wm8903_reset(codec);
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "failed to create pcms\n");
+		goto pcm_err;
+	}
+
+	/* SYSCLK is required for pretty much anything */
+	wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
+
+	/* power on device */
+	wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Latch volume update bits */
+	val = wm8903_read(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT);
+	val |= WM8903_ADCVU;
+	wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_LEFT, val);
+	wm8903_write(codec, WM8903_ADC_DIGITAL_VOLUME_RIGHT, val);
+
+	val = wm8903_read(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT);
+	val |= WM8903_DACVU;
+	wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_LEFT, val);
+	wm8903_write(codec, WM8903_DAC_DIGITAL_VOLUME_RIGHT, val);
+
+	val = wm8903_read(codec, WM8903_ANALOGUE_OUT1_LEFT);
+	val |= WM8903_HPOUTVU;
+	wm8903_write(codec, WM8903_ANALOGUE_OUT1_LEFT, val);
+	wm8903_write(codec, WM8903_ANALOGUE_OUT1_RIGHT, val);
+
+	val = wm8903_read(codec, WM8903_ANALOGUE_OUT2_LEFT);
+	val |= WM8903_LINEOUTVU;
+	wm8903_write(codec, WM8903_ANALOGUE_OUT2_LEFT, val);
+	wm8903_write(codec, WM8903_ANALOGUE_OUT2_RIGHT, val);
+
+	val = wm8903_read(codec, WM8903_ANALOGUE_OUT3_LEFT);
+	val |= WM8903_SPKVU;
+	wm8903_write(codec, WM8903_ANALOGUE_OUT3_LEFT, val);
+	wm8903_write(codec, WM8903_ANALOGUE_OUT3_RIGHT, val);
+
+	/* Enable DAC soft mute by default */
+	val = wm8903_read(codec, WM8903_DAC_DIGITAL_1);
+	val |= WM8903_DAC_MUTEMODE;
+	wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
+
+	wm8903_add_controls(codec);
+	wm8903_add_widgets(codec);
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "wm8903: failed to register card\n");
+		goto card_err;
+	}
+
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	kfree(codec->reg_cache);
+	return ret;
+}
+
+static struct snd_soc_device *wm8903_socdev;
+
+static int wm8903_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct snd_soc_device *socdev = wm8903_socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret;
+
+	i2c_set_clientdata(i2c, codec);
+	codec->control_data = i2c;
+
+	ret = wm8903_init(socdev);
+	if (ret < 0)
+		dev_err(&i2c->dev, "Device initialisation failed\n");
+
+	return ret;
+}
+
+static int wm8903_i2c_remove(struct i2c_client *client)
+{
+	struct snd_soc_codec *codec = i2c_get_clientdata(client);
+	kfree(codec->reg_cache);
+	return 0;
+}
+
+/* i2c codec control layer */
+static const struct i2c_device_id wm8903_i2c_id[] = {
+       { "wm8903", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
+
+static struct i2c_driver wm8903_i2c_driver = {
+	.driver = {
+		.name = "WM8903",
+		.owner = THIS_MODULE,
+	},
+	.probe    = wm8903_i2c_probe,
+	.remove   = wm8903_i2c_remove,
+	.id_table = wm8903_i2c_id,
+};
+
+static int wm8903_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct wm8903_setup_data *setup;
+	struct snd_soc_codec *codec;
+	struct wm8903_priv *wm8903;
+	struct i2c_board_info board_info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *i2c_client;
+	int ret = 0;
+
+	setup = socdev->codec_data;
+
+	if (!setup->i2c_address) {
+		dev_err(&pdev->dev, "No codec address provided\n");
+		return -ENODEV;
+	}
+
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+	if (wm8903 == NULL) {
+		ret = -ENOMEM;
+		goto err_codec;
+	}
+
+	codec->private_data = wm8903;
+	socdev->codec = codec;
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	wm8903_socdev = socdev;
+
+	codec->hw_write = (hw_write_t)i2c_master_send;
+	ret = i2c_add_driver(&wm8903_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		goto err_priv;
+	} else {
+		memset(&board_info, 0, sizeof(board_info));
+		strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE);
+		board_info.addr = setup->i2c_address;
+
+		adapter = i2c_get_adapter(setup->i2c_bus);
+		if (!adapter) {
+			dev_err(&pdev->dev, "Can't get I2C bus %d\n",
+				setup->i2c_bus);
+			ret = -ENODEV;
+			goto err_adapter;
+		}
+
+		i2c_client = i2c_new_device(adapter, &board_info);
+		i2c_put_adapter(adapter);
+		if (i2c_client == NULL) {
+			dev_err(&pdev->dev,
+				"I2C driver registration failed\n");
+			ret = -ENODEV;
+			goto err_adapter;
+		}
+	}
+
+	return ret;
+
+err_adapter:
+	i2c_del_driver(&wm8903_i2c_driver);
+err_priv:
+	kfree(codec->private_data);
+err_codec:
+	kfree(codec);
+	return ret;
+}
+
+/* power down chip */
+static int wm8903_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	if (codec->control_data)
+		wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+	i2c_unregister_device(socdev->codec->control_data);
+	i2c_del_driver(&wm8903_i2c_driver);
+	kfree(codec->private_data);
+	kfree(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8903 = {
+	.probe = 	wm8903_probe,
+	.remove = 	wm8903_remove,
+	.suspend = 	wm8903_suspend,
+	.resume =	wm8903_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
+
+MODULE_DESCRIPTION("ASoC WM8903 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h
new file mode 100644
index 0000000..cec622f
--- /dev/null
+++ b/sound/soc/codecs/wm8903.h
@@ -0,0 +1,1463 @@
+/*
+ * wm8903.h - WM8903 audio codec interface
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef _WM8903_H
+#define _WM8903_H
+
+#include <linux/i2c.h>
+
+extern struct snd_soc_dai wm8903_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8903;
+
+struct wm8903_setup_data {
+	int i2c_bus;
+	int i2c_address;
+};
+
+#define WM8903_MCLK_DIV_2 1
+#define WM8903_CLK_SYS    2
+#define WM8903_BCLK       3
+#define WM8903_LRCLK      4
+
+/*
+ * Register values.
+ */
+#define WM8903_SW_RESET_AND_ID                  0x00
+#define WM8903_REVISION_NUMBER                  0x01
+#define WM8903_BIAS_CONTROL_0                   0x04
+#define WM8903_VMID_CONTROL_0                   0x05
+#define WM8903_MIC_BIAS_CONTROL_0               0x06
+#define WM8903_ANALOGUE_DAC_0                   0x08
+#define WM8903_ANALOGUE_ADC_0                   0x0A
+#define WM8903_POWER_MANAGEMENT_0               0x0C
+#define WM8903_POWER_MANAGEMENT_1               0x0D
+#define WM8903_POWER_MANAGEMENT_2               0x0E
+#define WM8903_POWER_MANAGEMENT_3               0x0F
+#define WM8903_POWER_MANAGEMENT_4               0x10
+#define WM8903_POWER_MANAGEMENT_5               0x11
+#define WM8903_POWER_MANAGEMENT_6               0x12
+#define WM8903_CLOCK_RATES_0                    0x14
+#define WM8903_CLOCK_RATES_1                    0x15
+#define WM8903_CLOCK_RATES_2                    0x16
+#define WM8903_AUDIO_INTERFACE_0                0x18
+#define WM8903_AUDIO_INTERFACE_1                0x19
+#define WM8903_AUDIO_INTERFACE_2                0x1A
+#define WM8903_AUDIO_INTERFACE_3                0x1B
+#define WM8903_DAC_DIGITAL_VOLUME_LEFT          0x1E
+#define WM8903_DAC_DIGITAL_VOLUME_RIGHT         0x1F
+#define WM8903_DAC_DIGITAL_0                    0x20
+#define WM8903_DAC_DIGITAL_1                    0x21
+#define WM8903_ADC_DIGITAL_VOLUME_LEFT          0x24
+#define WM8903_ADC_DIGITAL_VOLUME_RIGHT         0x25
+#define WM8903_ADC_DIGITAL_0                    0x26
+#define WM8903_DIGITAL_MICROPHONE_0             0x27
+#define WM8903_DRC_0                            0x28
+#define WM8903_DRC_1                            0x29
+#define WM8903_DRC_2                            0x2A
+#define WM8903_DRC_3                            0x2B
+#define WM8903_ANALOGUE_LEFT_INPUT_0            0x2C
+#define WM8903_ANALOGUE_RIGHT_INPUT_0           0x2D
+#define WM8903_ANALOGUE_LEFT_INPUT_1            0x2E
+#define WM8903_ANALOGUE_RIGHT_INPUT_1           0x2F
+#define WM8903_ANALOGUE_LEFT_MIX_0              0x32
+#define WM8903_ANALOGUE_RIGHT_MIX_0             0x33
+#define WM8903_ANALOGUE_SPK_MIX_LEFT_0          0x34
+#define WM8903_ANALOGUE_SPK_MIX_LEFT_1          0x35
+#define WM8903_ANALOGUE_SPK_MIX_RIGHT_0         0x36
+#define WM8903_ANALOGUE_SPK_MIX_RIGHT_1         0x37
+#define WM8903_ANALOGUE_OUT1_LEFT               0x39
+#define WM8903_ANALOGUE_OUT1_RIGHT              0x3A
+#define WM8903_ANALOGUE_OUT2_LEFT               0x3B
+#define WM8903_ANALOGUE_OUT2_RIGHT              0x3C
+#define WM8903_ANALOGUE_OUT3_LEFT               0x3E
+#define WM8903_ANALOGUE_OUT3_RIGHT              0x3F
+#define WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0    0x41
+#define WM8903_DC_SERVO_0                       0x43
+#define WM8903_DC_SERVO_2                       0x45
+#define WM8903_ANALOGUE_HP_0                    0x5A
+#define WM8903_ANALOGUE_LINEOUT_0               0x5E
+#define WM8903_CHARGE_PUMP_0                    0x62
+#define WM8903_CLASS_W_0                        0x68
+#define WM8903_WRITE_SEQUENCER_0                0x6C
+#define WM8903_WRITE_SEQUENCER_1                0x6D
+#define WM8903_WRITE_SEQUENCER_2                0x6E
+#define WM8903_WRITE_SEQUENCER_3                0x6F
+#define WM8903_WRITE_SEQUENCER_4                0x70
+#define WM8903_CONTROL_INTERFACE                0x72
+#define WM8903_GPIO_CONTROL_1                   0x74
+#define WM8903_GPIO_CONTROL_2                   0x75
+#define WM8903_GPIO_CONTROL_3                   0x76
+#define WM8903_GPIO_CONTROL_4                   0x77
+#define WM8903_GPIO_CONTROL_5                   0x78
+#define WM8903_INTERRUPT_STATUS_1               0x79
+#define WM8903_INTERRUPT_STATUS_1_MASK          0x7A
+#define WM8903_INTERRUPT_POLARITY_1             0x7B
+#define WM8903_INTERRUPT_CONTROL                0x7E
+#define WM8903_CONTROL_INTERFACE_TEST_1         0x81
+#define WM8903_CHARGE_PUMP_TEST_1               0x95
+#define WM8903_CLOCK_RATE_TEST_4                0xA4
+#define WM8903_ANALOGUE_OUTPUT_BIAS_0           0xAC
+
+#define WM8903_REGISTER_COUNT                   75
+#define WM8903_MAX_REGISTER                     0xAC
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - SW Reset and ID
+ */
+#define WM8903_SW_RESET_DEV_ID1_MASK            0xFFFF  /* SW_RESET_DEV_ID1 - [15:0] */
+#define WM8903_SW_RESET_DEV_ID1_SHIFT                0  /* SW_RESET_DEV_ID1 - [15:0] */
+#define WM8903_SW_RESET_DEV_ID1_WIDTH               16  /* SW_RESET_DEV_ID1 - [15:0] */
+
+/*
+ * R1 (0x01) - Revision Number
+ */
+#define WM8903_CHIP_REV_MASK                    0x000F  /* CHIP_REV - [3:0] */
+#define WM8903_CHIP_REV_SHIFT                        0  /* CHIP_REV - [3:0] */
+#define WM8903_CHIP_REV_WIDTH                        4  /* CHIP_REV - [3:0] */
+
+/*
+ * R4 (0x04) - Bias Control 0
+ */
+#define WM8903_POBCTRL                          0x0010  /* POBCTRL */
+#define WM8903_POBCTRL_MASK                     0x0010  /* POBCTRL */
+#define WM8903_POBCTRL_SHIFT                         4  /* POBCTRL */
+#define WM8903_POBCTRL_WIDTH                         1  /* POBCTRL */
+#define WM8903_ISEL_MASK                        0x000C  /* ISEL - [3:2] */
+#define WM8903_ISEL_SHIFT                            2  /* ISEL - [3:2] */
+#define WM8903_ISEL_WIDTH                            2  /* ISEL - [3:2] */
+#define WM8903_STARTUP_BIAS_ENA                 0x0002  /* STARTUP_BIAS_ENA */
+#define WM8903_STARTUP_BIAS_ENA_MASK            0x0002  /* STARTUP_BIAS_ENA */
+#define WM8903_STARTUP_BIAS_ENA_SHIFT                1  /* STARTUP_BIAS_ENA */
+#define WM8903_STARTUP_BIAS_ENA_WIDTH                1  /* STARTUP_BIAS_ENA */
+#define WM8903_BIAS_ENA                         0x0001  /* BIAS_ENA */
+#define WM8903_BIAS_ENA_MASK                    0x0001  /* BIAS_ENA */
+#define WM8903_BIAS_ENA_SHIFT                        0  /* BIAS_ENA */
+#define WM8903_BIAS_ENA_WIDTH                        1  /* BIAS_ENA */
+
+/*
+ * R5 (0x05) - VMID Control 0
+ */
+#define WM8903_VMID_TIE_ENA                     0x0080  /* VMID_TIE_ENA */
+#define WM8903_VMID_TIE_ENA_MASK                0x0080  /* VMID_TIE_ENA */
+#define WM8903_VMID_TIE_ENA_SHIFT                    7  /* VMID_TIE_ENA */
+#define WM8903_VMID_TIE_ENA_WIDTH                    1  /* VMID_TIE_ENA */
+#define WM8903_BUFIO_ENA                        0x0040  /* BUFIO_ENA */
+#define WM8903_BUFIO_ENA_MASK                   0x0040  /* BUFIO_ENA */
+#define WM8903_BUFIO_ENA_SHIFT                       6  /* BUFIO_ENA */
+#define WM8903_BUFIO_ENA_WIDTH                       1  /* BUFIO_ENA */
+#define WM8903_VMID_IO_ENA                      0x0020  /* VMID_IO_ENA */
+#define WM8903_VMID_IO_ENA_MASK                 0x0020  /* VMID_IO_ENA */
+#define WM8903_VMID_IO_ENA_SHIFT                     5  /* VMID_IO_ENA */
+#define WM8903_VMID_IO_ENA_WIDTH                     1  /* VMID_IO_ENA */
+#define WM8903_VMID_SOFT_MASK                   0x0018  /* VMID_SOFT - [4:3] */
+#define WM8903_VMID_SOFT_SHIFT                       3  /* VMID_SOFT - [4:3] */
+#define WM8903_VMID_SOFT_WIDTH                       2  /* VMID_SOFT - [4:3] */
+#define WM8903_VMID_RES_MASK                    0x0006  /* VMID_RES - [2:1] */
+#define WM8903_VMID_RES_SHIFT                        1  /* VMID_RES - [2:1] */
+#define WM8903_VMID_RES_WIDTH                        2  /* VMID_RES - [2:1] */
+#define WM8903_VMID_BUF_ENA                     0x0001  /* VMID_BUF_ENA */
+#define WM8903_VMID_BUF_ENA_MASK                0x0001  /* VMID_BUF_ENA */
+#define WM8903_VMID_BUF_ENA_SHIFT                    0  /* VMID_BUF_ENA */
+#define WM8903_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
+
+#define WM8903_VMID_RES_50K                          2
+#define WM8903_VMID_RES_250K                         3
+#define WM8903_VMID_RES_5K                           4
+
+/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8903_MICDET_HYST_ENA                  0x0080  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_MASK             0x0080  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_SHIFT                 7  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_WIDTH                 1  /* MICDET_HYST_ENA */
+#define WM8903_MICDET_THR_MASK                  0x0070  /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_SHIFT                      4  /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_WIDTH                      3  /* MICDET_THR - [6:4] */
+#define WM8903_MICSHORT_THR_MASK                0x000C  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_SHIFT                    2  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_WIDTH                    2  /* MICSHORT_THR - [3:2] */
+#define WM8903_MICDET_ENA                       0x0002  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_MASK                  0x0002  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_SHIFT                      1  /* MICDET_ENA */
+#define WM8903_MICDET_ENA_WIDTH                      1  /* MICDET_ENA */
+#define WM8903_MICBIAS_ENA                      0x0001  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_MASK                 0x0001  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_SHIFT                     0  /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_WIDTH                     1  /* MICBIAS_ENA */
+
+/*
+ * R8 (0x08) - Analogue DAC 0
+ */
+#define WM8903_DACBIAS_SEL_MASK                 0x0018  /* DACBIAS_SEL - [4:3] */
+#define WM8903_DACBIAS_SEL_SHIFT                     3  /* DACBIAS_SEL - [4:3] */
+#define WM8903_DACBIAS_SEL_WIDTH                     2  /* DACBIAS_SEL - [4:3] */
+#define WM8903_DACVMID_BIAS_SEL_MASK            0x0006  /* DACVMID_BIAS_SEL - [2:1] */
+#define WM8903_DACVMID_BIAS_SEL_SHIFT                1  /* DACVMID_BIAS_SEL - [2:1] */
+#define WM8903_DACVMID_BIAS_SEL_WIDTH                2  /* DACVMID_BIAS_SEL - [2:1] */
+
+/*
+ * R10 (0x0A) - Analogue ADC 0
+ */
+#define WM8903_ADC_OSR128                       0x0001  /* ADC_OSR128 */
+#define WM8903_ADC_OSR128_MASK                  0x0001  /* ADC_OSR128 */
+#define WM8903_ADC_OSR128_SHIFT                      0  /* ADC_OSR128 */
+#define WM8903_ADC_OSR128_WIDTH                      1  /* ADC_OSR128 */
+
+/*
+ * R12 (0x0C) - Power Management 0
+ */
+#define WM8903_INL_ENA                          0x0002  /* INL_ENA */
+#define WM8903_INL_ENA_MASK                     0x0002  /* INL_ENA */
+#define WM8903_INL_ENA_SHIFT                         1  /* INL_ENA */
+#define WM8903_INL_ENA_WIDTH                         1  /* INL_ENA */
+#define WM8903_INR_ENA                          0x0001  /* INR_ENA */
+#define WM8903_INR_ENA_MASK                     0x0001  /* INR_ENA */
+#define WM8903_INR_ENA_SHIFT                         0  /* INR_ENA */
+#define WM8903_INR_ENA_WIDTH                         1  /* INR_ENA */
+
+/*
+ * R13 (0x0D) - Power Management 1
+ */
+#define WM8903_MIXOUTL_ENA                      0x0002  /* MIXOUTL_ENA */
+#define WM8903_MIXOUTL_ENA_MASK                 0x0002  /* MIXOUTL_ENA */
+#define WM8903_MIXOUTL_ENA_SHIFT                     1  /* MIXOUTL_ENA */
+#define WM8903_MIXOUTL_ENA_WIDTH                     1  /* MIXOUTL_ENA */
+#define WM8903_MIXOUTR_ENA                      0x0001  /* MIXOUTR_ENA */
+#define WM8903_MIXOUTR_ENA_MASK                 0x0001  /* MIXOUTR_ENA */
+#define WM8903_MIXOUTR_ENA_SHIFT                     0  /* MIXOUTR_ENA */
+#define WM8903_MIXOUTR_ENA_WIDTH                     1  /* MIXOUTR_ENA */
+
+/*
+ * R14 (0x0E) - Power Management 2
+ */
+#define WM8903_HPL_PGA_ENA                      0x0002  /* HPL_PGA_ENA */
+#define WM8903_HPL_PGA_ENA_MASK                 0x0002  /* HPL_PGA_ENA */
+#define WM8903_HPL_PGA_ENA_SHIFT                     1  /* HPL_PGA_ENA */
+#define WM8903_HPL_PGA_ENA_WIDTH                     1  /* HPL_PGA_ENA */
+#define WM8903_HPR_PGA_ENA                      0x0001  /* HPR_PGA_ENA */
+#define WM8903_HPR_PGA_ENA_MASK                 0x0001  /* HPR_PGA_ENA */
+#define WM8903_HPR_PGA_ENA_SHIFT                     0  /* HPR_PGA_ENA */
+#define WM8903_HPR_PGA_ENA_WIDTH                     1  /* HPR_PGA_ENA */
+
+/*
+ * R15 (0x0F) - Power Management 3
+ */
+#define WM8903_LINEOUTL_PGA_ENA                 0x0002  /* LINEOUTL_PGA_ENA */
+#define WM8903_LINEOUTL_PGA_ENA_MASK            0x0002  /* LINEOUTL_PGA_ENA */
+#define WM8903_LINEOUTL_PGA_ENA_SHIFT                1  /* LINEOUTL_PGA_ENA */
+#define WM8903_LINEOUTL_PGA_ENA_WIDTH                1  /* LINEOUTL_PGA_ENA */
+#define WM8903_LINEOUTR_PGA_ENA                 0x0001  /* LINEOUTR_PGA_ENA */
+#define WM8903_LINEOUTR_PGA_ENA_MASK            0x0001  /* LINEOUTR_PGA_ENA */
+#define WM8903_LINEOUTR_PGA_ENA_SHIFT                0  /* LINEOUTR_PGA_ENA */
+#define WM8903_LINEOUTR_PGA_ENA_WIDTH                1  /* LINEOUTR_PGA_ENA */
+
+/*
+ * R16 (0x10) - Power Management 4
+ */
+#define WM8903_MIXSPKL_ENA                      0x0002  /* MIXSPKL_ENA */
+#define WM8903_MIXSPKL_ENA_MASK                 0x0002  /* MIXSPKL_ENA */
+#define WM8903_MIXSPKL_ENA_SHIFT                     1  /* MIXSPKL_ENA */
+#define WM8903_MIXSPKL_ENA_WIDTH                     1  /* MIXSPKL_ENA */
+#define WM8903_MIXSPKR_ENA                      0x0001  /* MIXSPKR_ENA */
+#define WM8903_MIXSPKR_ENA_MASK                 0x0001  /* MIXSPKR_ENA */
+#define WM8903_MIXSPKR_ENA_SHIFT                     0  /* MIXSPKR_ENA */
+#define WM8903_MIXSPKR_ENA_WIDTH                     1  /* MIXSPKR_ENA */
+
+/*
+ * R17 (0x11) - Power Management 5
+ */
+#define WM8903_SPKL_ENA                         0x0002  /* SPKL_ENA */
+#define WM8903_SPKL_ENA_MASK                    0x0002  /* SPKL_ENA */
+#define WM8903_SPKL_ENA_SHIFT                        1  /* SPKL_ENA */
+#define WM8903_SPKL_ENA_WIDTH                        1  /* SPKL_ENA */
+#define WM8903_SPKR_ENA                         0x0001  /* SPKR_ENA */
+#define WM8903_SPKR_ENA_MASK                    0x0001  /* SPKR_ENA */
+#define WM8903_SPKR_ENA_SHIFT                        0  /* SPKR_ENA */
+#define WM8903_SPKR_ENA_WIDTH                        1  /* SPKR_ENA */
+
+/*
+ * R18 (0x12) - Power Management 6
+ */
+#define WM8903_DACL_ENA                         0x0008  /* DACL_ENA */
+#define WM8903_DACL_ENA_MASK                    0x0008  /* DACL_ENA */
+#define WM8903_DACL_ENA_SHIFT                        3  /* DACL_ENA */
+#define WM8903_DACL_ENA_WIDTH                        1  /* DACL_ENA */
+#define WM8903_DACR_ENA                         0x0004  /* DACR_ENA */
+#define WM8903_DACR_ENA_MASK                    0x0004  /* DACR_ENA */
+#define WM8903_DACR_ENA_SHIFT                        2  /* DACR_ENA */
+#define WM8903_DACR_ENA_WIDTH                        1  /* DACR_ENA */
+#define WM8903_ADCL_ENA                         0x0002  /* ADCL_ENA */
+#define WM8903_ADCL_ENA_MASK                    0x0002  /* ADCL_ENA */
+#define WM8903_ADCL_ENA_SHIFT                        1  /* ADCL_ENA */
+#define WM8903_ADCL_ENA_WIDTH                        1  /* ADCL_ENA */
+#define WM8903_ADCR_ENA                         0x0001  /* ADCR_ENA */
+#define WM8903_ADCR_ENA_MASK                    0x0001  /* ADCR_ENA */
+#define WM8903_ADCR_ENA_SHIFT                        0  /* ADCR_ENA */
+#define WM8903_ADCR_ENA_WIDTH                        1  /* ADCR_ENA */
+
+/*
+ * R20 (0x14) - Clock Rates 0
+ */
+#define WM8903_MCLKDIV2                         0x0001  /* MCLKDIV2 */
+#define WM8903_MCLKDIV2_MASK                    0x0001  /* MCLKDIV2 */
+#define WM8903_MCLKDIV2_SHIFT                        0  /* MCLKDIV2 */
+#define WM8903_MCLKDIV2_WIDTH                        1  /* MCLKDIV2 */
+
+/*
+ * R21 (0x15) - Clock Rates 1
+ */
+#define WM8903_CLK_SYS_RATE_MASK                0x3C00  /* CLK_SYS_RATE - [13:10] */
+#define WM8903_CLK_SYS_RATE_SHIFT                   10  /* CLK_SYS_RATE - [13:10] */
+#define WM8903_CLK_SYS_RATE_WIDTH                    4  /* CLK_SYS_RATE - [13:10] */
+#define WM8903_CLK_SYS_MODE_MASK                0x0300  /* CLK_SYS_MODE - [9:8] */
+#define WM8903_CLK_SYS_MODE_SHIFT                    8  /* CLK_SYS_MODE - [9:8] */
+#define WM8903_CLK_SYS_MODE_WIDTH                    2  /* CLK_SYS_MODE - [9:8] */
+#define WM8903_SAMPLE_RATE_MASK                 0x000F  /* SAMPLE_RATE - [3:0] */
+#define WM8903_SAMPLE_RATE_SHIFT                     0  /* SAMPLE_RATE - [3:0] */
+#define WM8903_SAMPLE_RATE_WIDTH                     4  /* SAMPLE_RATE - [3:0] */
+
+/*
+ * R22 (0x16) - Clock Rates 2
+ */
+#define WM8903_CLK_SYS_ENA                      0x0004  /* CLK_SYS_ENA */
+#define WM8903_CLK_SYS_ENA_MASK                 0x0004  /* CLK_SYS_ENA */
+#define WM8903_CLK_SYS_ENA_SHIFT                     2  /* CLK_SYS_ENA */
+#define WM8903_CLK_SYS_ENA_WIDTH                     1  /* CLK_SYS_ENA */
+#define WM8903_CLK_DSP_ENA                      0x0002  /* CLK_DSP_ENA */
+#define WM8903_CLK_DSP_ENA_MASK                 0x0002  /* CLK_DSP_ENA */
+#define WM8903_CLK_DSP_ENA_SHIFT                     1  /* CLK_DSP_ENA */
+#define WM8903_CLK_DSP_ENA_WIDTH                     1  /* CLK_DSP_ENA */
+#define WM8903_TO_ENA                           0x0001  /* TO_ENA */
+#define WM8903_TO_ENA_MASK                      0x0001  /* TO_ENA */
+#define WM8903_TO_ENA_SHIFT                          0  /* TO_ENA */
+#define WM8903_TO_ENA_WIDTH                          1  /* TO_ENA */
+
+/*
+ * R24 (0x18) - Audio Interface 0
+ */
+#define WM8903_DACL_DATINV                      0x1000  /* DACL_DATINV */
+#define WM8903_DACL_DATINV_MASK                 0x1000  /* DACL_DATINV */
+#define WM8903_DACL_DATINV_SHIFT                    12  /* DACL_DATINV */
+#define WM8903_DACL_DATINV_WIDTH                     1  /* DACL_DATINV */
+#define WM8903_DACR_DATINV                      0x0800  /* DACR_DATINV */
+#define WM8903_DACR_DATINV_MASK                 0x0800  /* DACR_DATINV */
+#define WM8903_DACR_DATINV_SHIFT                    11  /* DACR_DATINV */
+#define WM8903_DACR_DATINV_WIDTH                     1  /* DACR_DATINV */
+#define WM8903_DAC_BOOST_MASK                   0x0600  /* DAC_BOOST - [10:9] */
+#define WM8903_DAC_BOOST_SHIFT                       9  /* DAC_BOOST - [10:9] */
+#define WM8903_DAC_BOOST_WIDTH                       2  /* DAC_BOOST - [10:9] */
+#define WM8903_LOOPBACK                         0x0100  /* LOOPBACK */
+#define WM8903_LOOPBACK_MASK                    0x0100  /* LOOPBACK */
+#define WM8903_LOOPBACK_SHIFT                        8  /* LOOPBACK */
+#define WM8903_LOOPBACK_WIDTH                        1  /* LOOPBACK */
+#define WM8903_AIFADCL_SRC                      0x0080  /* AIFADCL_SRC */
+#define WM8903_AIFADCL_SRC_MASK                 0x0080  /* AIFADCL_SRC */
+#define WM8903_AIFADCL_SRC_SHIFT                     7  /* AIFADCL_SRC */
+#define WM8903_AIFADCL_SRC_WIDTH                     1  /* AIFADCL_SRC */
+#define WM8903_AIFADCR_SRC                      0x0040  /* AIFADCR_SRC */
+#define WM8903_AIFADCR_SRC_MASK                 0x0040  /* AIFADCR_SRC */
+#define WM8903_AIFADCR_SRC_SHIFT                     6  /* AIFADCR_SRC */
+#define WM8903_AIFADCR_SRC_WIDTH                     1  /* AIFADCR_SRC */
+#define WM8903_AIFDACL_SRC                      0x0020  /* AIFDACL_SRC */
+#define WM8903_AIFDACL_SRC_MASK                 0x0020  /* AIFDACL_SRC */
+#define WM8903_AIFDACL_SRC_SHIFT                     5  /* AIFDACL_SRC */
+#define WM8903_AIFDACL_SRC_WIDTH                     1  /* AIFDACL_SRC */
+#define WM8903_AIFDACR_SRC                      0x0010  /* AIFDACR_SRC */
+#define WM8903_AIFDACR_SRC_MASK                 0x0010  /* AIFDACR_SRC */
+#define WM8903_AIFDACR_SRC_SHIFT                     4  /* AIFDACR_SRC */
+#define WM8903_AIFDACR_SRC_WIDTH                     1  /* AIFDACR_SRC */
+#define WM8903_ADC_COMP                         0x0008  /* ADC_COMP */
+#define WM8903_ADC_COMP_MASK                    0x0008  /* ADC_COMP */
+#define WM8903_ADC_COMP_SHIFT                        3  /* ADC_COMP */
+#define WM8903_ADC_COMP_WIDTH                        1  /* ADC_COMP */
+#define WM8903_ADC_COMPMODE                     0x0004  /* ADC_COMPMODE */
+#define WM8903_ADC_COMPMODE_MASK                0x0004  /* ADC_COMPMODE */
+#define WM8903_ADC_COMPMODE_SHIFT                    2  /* ADC_COMPMODE */
+#define WM8903_ADC_COMPMODE_WIDTH                    1  /* ADC_COMPMODE */
+#define WM8903_DAC_COMP                         0x0002  /* DAC_COMP */
+#define WM8903_DAC_COMP_MASK                    0x0002  /* DAC_COMP */
+#define WM8903_DAC_COMP_SHIFT                        1  /* DAC_COMP */
+#define WM8903_DAC_COMP_WIDTH                        1  /* DAC_COMP */
+#define WM8903_DAC_COMPMODE                     0x0001  /* DAC_COMPMODE */
+#define WM8903_DAC_COMPMODE_MASK                0x0001  /* DAC_COMPMODE */
+#define WM8903_DAC_COMPMODE_SHIFT                    0  /* DAC_COMPMODE */
+#define WM8903_DAC_COMPMODE_WIDTH                    1  /* DAC_COMPMODE */
+
+/*
+ * R25 (0x19) - Audio Interface 1
+ */
+#define WM8903_AIFDAC_TDM                       0x2000  /* AIFDAC_TDM */
+#define WM8903_AIFDAC_TDM_MASK                  0x2000  /* AIFDAC_TDM */
+#define WM8903_AIFDAC_TDM_SHIFT                     13  /* AIFDAC_TDM */
+#define WM8903_AIFDAC_TDM_WIDTH                      1  /* AIFDAC_TDM */
+#define WM8903_AIFDAC_TDM_CHAN                  0x1000  /* AIFDAC_TDM_CHAN */
+#define WM8903_AIFDAC_TDM_CHAN_MASK             0x1000  /* AIFDAC_TDM_CHAN */
+#define WM8903_AIFDAC_TDM_CHAN_SHIFT                12  /* AIFDAC_TDM_CHAN */
+#define WM8903_AIFDAC_TDM_CHAN_WIDTH                 1  /* AIFDAC_TDM_CHAN */
+#define WM8903_AIFADC_TDM                       0x0800  /* AIFADC_TDM */
+#define WM8903_AIFADC_TDM_MASK                  0x0800  /* AIFADC_TDM */
+#define WM8903_AIFADC_TDM_SHIFT                     11  /* AIFADC_TDM */
+#define WM8903_AIFADC_TDM_WIDTH                      1  /* AIFADC_TDM */
+#define WM8903_AIFADC_TDM_CHAN                  0x0400  /* AIFADC_TDM_CHAN */
+#define WM8903_AIFADC_TDM_CHAN_MASK             0x0400  /* AIFADC_TDM_CHAN */
+#define WM8903_AIFADC_TDM_CHAN_SHIFT                10  /* AIFADC_TDM_CHAN */
+#define WM8903_AIFADC_TDM_CHAN_WIDTH                 1  /* AIFADC_TDM_CHAN */
+#define WM8903_LRCLK_DIR                        0x0200  /* LRCLK_DIR */
+#define WM8903_LRCLK_DIR_MASK                   0x0200  /* LRCLK_DIR */
+#define WM8903_LRCLK_DIR_SHIFT                       9  /* LRCLK_DIR */
+#define WM8903_LRCLK_DIR_WIDTH                       1  /* LRCLK_DIR */
+#define WM8903_AIF_BCLK_INV                     0x0080  /* AIF_BCLK_INV */
+#define WM8903_AIF_BCLK_INV_MASK                0x0080  /* AIF_BCLK_INV */
+#define WM8903_AIF_BCLK_INV_SHIFT                    7  /* AIF_BCLK_INV */
+#define WM8903_AIF_BCLK_INV_WIDTH                    1  /* AIF_BCLK_INV */
+#define WM8903_BCLK_DIR                         0x0040  /* BCLK_DIR */
+#define WM8903_BCLK_DIR_MASK                    0x0040  /* BCLK_DIR */
+#define WM8903_BCLK_DIR_SHIFT                        6  /* BCLK_DIR */
+#define WM8903_BCLK_DIR_WIDTH                        1  /* BCLK_DIR */
+#define WM8903_AIF_LRCLK_INV                    0x0010  /* AIF_LRCLK_INV */
+#define WM8903_AIF_LRCLK_INV_MASK               0x0010  /* AIF_LRCLK_INV */
+#define WM8903_AIF_LRCLK_INV_SHIFT                   4  /* AIF_LRCLK_INV */
+#define WM8903_AIF_LRCLK_INV_WIDTH                   1  /* AIF_LRCLK_INV */
+#define WM8903_AIF_WL_MASK                      0x000C  /* AIF_WL - [3:2] */
+#define WM8903_AIF_WL_SHIFT                          2  /* AIF_WL - [3:2] */
+#define WM8903_AIF_WL_WIDTH                          2  /* AIF_WL - [3:2] */
+#define WM8903_AIF_FMT_MASK                     0x0003  /* AIF_FMT - [1:0] */
+#define WM8903_AIF_FMT_SHIFT                         0  /* AIF_FMT - [1:0] */
+#define WM8903_AIF_FMT_WIDTH                         2  /* AIF_FMT - [1:0] */
+
+/*
+ * R26 (0x1A) - Audio Interface 2
+ */
+#define WM8903_BCLK_DIV_MASK                    0x001F  /* BCLK_DIV - [4:0] */
+#define WM8903_BCLK_DIV_SHIFT                        0  /* BCLK_DIV - [4:0] */
+#define WM8903_BCLK_DIV_WIDTH                        5  /* BCLK_DIV - [4:0] */
+
+/*
+ * R27 (0x1B) - Audio Interface 3
+ */
+#define WM8903_LRCLK_RATE_MASK                  0x07FF  /* LRCLK_RATE - [10:0] */
+#define WM8903_LRCLK_RATE_SHIFT                      0  /* LRCLK_RATE - [10:0] */
+#define WM8903_LRCLK_RATE_WIDTH                     11  /* LRCLK_RATE - [10:0] */
+
+/*
+ * R30 (0x1E) - DAC Digital Volume Left
+ */
+#define WM8903_DACVU                            0x0100  /* DACVU */
+#define WM8903_DACVU_MASK                       0x0100  /* DACVU */
+#define WM8903_DACVU_SHIFT                           8  /* DACVU */
+#define WM8903_DACVU_WIDTH                           1  /* DACVU */
+#define WM8903_DACL_VOL_MASK                    0x00FF  /* DACL_VOL - [7:0] */
+#define WM8903_DACL_VOL_SHIFT                        0  /* DACL_VOL - [7:0] */
+#define WM8903_DACL_VOL_WIDTH                        8  /* DACL_VOL - [7:0] */
+
+/*
+ * R31 (0x1F) - DAC Digital Volume Right
+ */
+#define WM8903_DACVU                            0x0100  /* DACVU */
+#define WM8903_DACVU_MASK                       0x0100  /* DACVU */
+#define WM8903_DACVU_SHIFT                           8  /* DACVU */
+#define WM8903_DACVU_WIDTH                           1  /* DACVU */
+#define WM8903_DACR_VOL_MASK                    0x00FF  /* DACR_VOL - [7:0] */
+#define WM8903_DACR_VOL_SHIFT                        0  /* DACR_VOL - [7:0] */
+#define WM8903_DACR_VOL_WIDTH                        8  /* DACR_VOL - [7:0] */
+
+/*
+ * R32 (0x20) - DAC Digital 0
+ */
+#define WM8903_ADCL_DAC_SVOL_MASK               0x0F00  /* ADCL_DAC_SVOL - [11:8] */
+#define WM8903_ADCL_DAC_SVOL_SHIFT                   8  /* ADCL_DAC_SVOL - [11:8] */
+#define WM8903_ADCL_DAC_SVOL_WIDTH                   4  /* ADCL_DAC_SVOL - [11:8] */
+#define WM8903_ADCR_DAC_SVOL_MASK               0x00F0  /* ADCR_DAC_SVOL - [7:4] */
+#define WM8903_ADCR_DAC_SVOL_SHIFT                   4  /* ADCR_DAC_SVOL - [7:4] */
+#define WM8903_ADCR_DAC_SVOL_WIDTH                   4  /* ADCR_DAC_SVOL - [7:4] */
+#define WM8903_ADC_TO_DACL_MASK                 0x000C  /* ADC_TO_DACL - [3:2] */
+#define WM8903_ADC_TO_DACL_SHIFT                     2  /* ADC_TO_DACL - [3:2] */
+#define WM8903_ADC_TO_DACL_WIDTH                     2  /* ADC_TO_DACL - [3:2] */
+#define WM8903_ADC_TO_DACR_MASK                 0x0003  /* ADC_TO_DACR - [1:0] */
+#define WM8903_ADC_TO_DACR_SHIFT                     0  /* ADC_TO_DACR - [1:0] */
+#define WM8903_ADC_TO_DACR_WIDTH                     2  /* ADC_TO_DACR - [1:0] */
+
+/*
+ * R33 (0x21) - DAC Digital 1
+ */
+#define WM8903_DAC_MONO                         0x1000  /* DAC_MONO */
+#define WM8903_DAC_MONO_MASK                    0x1000  /* DAC_MONO */
+#define WM8903_DAC_MONO_SHIFT                       12  /* DAC_MONO */
+#define WM8903_DAC_MONO_WIDTH                        1  /* DAC_MONO */
+#define WM8903_DAC_SB_FILT                      0x0800  /* DAC_SB_FILT */
+#define WM8903_DAC_SB_FILT_MASK                 0x0800  /* DAC_SB_FILT */
+#define WM8903_DAC_SB_FILT_SHIFT                    11  /* DAC_SB_FILT */
+#define WM8903_DAC_SB_FILT_WIDTH                     1  /* DAC_SB_FILT */
+#define WM8903_DAC_MUTERATE                     0x0400  /* DAC_MUTERATE */
+#define WM8903_DAC_MUTERATE_MASK                0x0400  /* DAC_MUTERATE */
+#define WM8903_DAC_MUTERATE_SHIFT                   10  /* DAC_MUTERATE */
+#define WM8903_DAC_MUTERATE_WIDTH                    1  /* DAC_MUTERATE */
+#define WM8903_DAC_MUTEMODE                     0x0200  /* DAC_MUTEMODE */
+#define WM8903_DAC_MUTEMODE_MASK                0x0200  /* DAC_MUTEMODE */
+#define WM8903_DAC_MUTEMODE_SHIFT                    9  /* DAC_MUTEMODE */
+#define WM8903_DAC_MUTEMODE_WIDTH                    1  /* DAC_MUTEMODE */
+#define WM8903_DAC_MUTE                         0x0008  /* DAC_MUTE */
+#define WM8903_DAC_MUTE_MASK                    0x0008  /* DAC_MUTE */
+#define WM8903_DAC_MUTE_SHIFT                        3  /* DAC_MUTE */
+#define WM8903_DAC_MUTE_WIDTH                        1  /* DAC_MUTE */
+#define WM8903_DEEMPH_MASK                      0x0006  /* DEEMPH - [2:1] */
+#define WM8903_DEEMPH_SHIFT                          1  /* DEEMPH - [2:1] */
+#define WM8903_DEEMPH_WIDTH                          2  /* DEEMPH - [2:1] */
+
+/*
+ * R36 (0x24) - ADC Digital Volume Left
+ */
+#define WM8903_ADCVU                            0x0100  /* ADCVU */
+#define WM8903_ADCVU_MASK                       0x0100  /* ADCVU */
+#define WM8903_ADCVU_SHIFT                           8  /* ADCVU */
+#define WM8903_ADCVU_WIDTH                           1  /* ADCVU */
+#define WM8903_ADCL_VOL_MASK                    0x00FF  /* ADCL_VOL - [7:0] */
+#define WM8903_ADCL_VOL_SHIFT                        0  /* ADCL_VOL - [7:0] */
+#define WM8903_ADCL_VOL_WIDTH                        8  /* ADCL_VOL - [7:0] */
+
+/*
+ * R37 (0x25) - ADC Digital Volume Right
+ */
+#define WM8903_ADCVU                            0x0100  /* ADCVU */
+#define WM8903_ADCVU_MASK                       0x0100  /* ADCVU */
+#define WM8903_ADCVU_SHIFT                           8  /* ADCVU */
+#define WM8903_ADCVU_WIDTH                           1  /* ADCVU */
+#define WM8903_ADCR_VOL_MASK                    0x00FF  /* ADCR_VOL - [7:0] */
+#define WM8903_ADCR_VOL_SHIFT                        0  /* ADCR_VOL - [7:0] */
+#define WM8903_ADCR_VOL_WIDTH                        8  /* ADCR_VOL - [7:0] */
+
+/*
+ * R38 (0x26) - ADC Digital 0
+ */
+#define WM8903_ADC_HPF_CUT_MASK                 0x0060  /* ADC_HPF_CUT - [6:5] */
+#define WM8903_ADC_HPF_CUT_SHIFT                     5  /* ADC_HPF_CUT - [6:5] */
+#define WM8903_ADC_HPF_CUT_WIDTH                     2  /* ADC_HPF_CUT - [6:5] */
+#define WM8903_ADC_HPF_ENA                      0x0010  /* ADC_HPF_ENA */
+#define WM8903_ADC_HPF_ENA_MASK                 0x0010  /* ADC_HPF_ENA */
+#define WM8903_ADC_HPF_ENA_SHIFT                     4  /* ADC_HPF_ENA */
+#define WM8903_ADC_HPF_ENA_WIDTH                     1  /* ADC_HPF_ENA */
+#define WM8903_ADCL_DATINV                      0x0002  /* ADCL_DATINV */
+#define WM8903_ADCL_DATINV_MASK                 0x0002  /* ADCL_DATINV */
+#define WM8903_ADCL_DATINV_SHIFT                     1  /* ADCL_DATINV */
+#define WM8903_ADCL_DATINV_WIDTH                     1  /* ADCL_DATINV */
+#define WM8903_ADCR_DATINV                      0x0001  /* ADCR_DATINV */
+#define WM8903_ADCR_DATINV_MASK                 0x0001  /* ADCR_DATINV */
+#define WM8903_ADCR_DATINV_SHIFT                     0  /* ADCR_DATINV */
+#define WM8903_ADCR_DATINV_WIDTH                     1  /* ADCR_DATINV */
+
+/*
+ * R39 (0x27) - Digital Microphone 0
+ */
+#define WM8903_DIGMIC_MODE_SEL                  0x0100  /* DIGMIC_MODE_SEL */
+#define WM8903_DIGMIC_MODE_SEL_MASK             0x0100  /* DIGMIC_MODE_SEL */
+#define WM8903_DIGMIC_MODE_SEL_SHIFT                 8  /* DIGMIC_MODE_SEL */
+#define WM8903_DIGMIC_MODE_SEL_WIDTH                 1  /* DIGMIC_MODE_SEL */
+#define WM8903_DIGMIC_CLK_SEL_L_MASK            0x00C0  /* DIGMIC_CLK_SEL_L - [7:6] */
+#define WM8903_DIGMIC_CLK_SEL_L_SHIFT                6  /* DIGMIC_CLK_SEL_L - [7:6] */
+#define WM8903_DIGMIC_CLK_SEL_L_WIDTH                2  /* DIGMIC_CLK_SEL_L - [7:6] */
+#define WM8903_DIGMIC_CLK_SEL_R_MASK            0x0030  /* DIGMIC_CLK_SEL_R - [5:4] */
+#define WM8903_DIGMIC_CLK_SEL_R_SHIFT                4  /* DIGMIC_CLK_SEL_R - [5:4] */
+#define WM8903_DIGMIC_CLK_SEL_R_WIDTH                2  /* DIGMIC_CLK_SEL_R - [5:4] */
+#define WM8903_DIGMIC_CLK_SEL_RT_MASK           0x000C  /* DIGMIC_CLK_SEL_RT - [3:2] */
+#define WM8903_DIGMIC_CLK_SEL_RT_SHIFT               2  /* DIGMIC_CLK_SEL_RT - [3:2] */
+#define WM8903_DIGMIC_CLK_SEL_RT_WIDTH               2  /* DIGMIC_CLK_SEL_RT - [3:2] */
+#define WM8903_DIGMIC_CLK_SEL_MASK              0x0003  /* DIGMIC_CLK_SEL - [1:0] */
+#define WM8903_DIGMIC_CLK_SEL_SHIFT                  0  /* DIGMIC_CLK_SEL - [1:0] */
+#define WM8903_DIGMIC_CLK_SEL_WIDTH                  2  /* DIGMIC_CLK_SEL - [1:0] */
+
+/*
+ * R40 (0x28) - DRC 0
+ */
+#define WM8903_DRC_ENA                          0x8000  /* DRC_ENA */
+#define WM8903_DRC_ENA_MASK                     0x8000  /* DRC_ENA */
+#define WM8903_DRC_ENA_SHIFT                        15  /* DRC_ENA */
+#define WM8903_DRC_ENA_WIDTH                         1  /* DRC_ENA */
+#define WM8903_DRC_THRESH_HYST_MASK             0x1800  /* DRC_THRESH_HYST - [12:11] */
+#define WM8903_DRC_THRESH_HYST_SHIFT                11  /* DRC_THRESH_HYST - [12:11] */
+#define WM8903_DRC_THRESH_HYST_WIDTH                 2  /* DRC_THRESH_HYST - [12:11] */
+#define WM8903_DRC_STARTUP_GAIN_MASK            0x07C0  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM8903_DRC_STARTUP_GAIN_SHIFT                6  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM8903_DRC_STARTUP_GAIN_WIDTH                5  /* DRC_STARTUP_GAIN - [10:6] */
+#define WM8903_DRC_FF_DELAY                     0x0020  /* DRC_FF_DELAY */
+#define WM8903_DRC_FF_DELAY_MASK                0x0020  /* DRC_FF_DELAY */
+#define WM8903_DRC_FF_DELAY_SHIFT                    5  /* DRC_FF_DELAY */
+#define WM8903_DRC_FF_DELAY_WIDTH                    1  /* DRC_FF_DELAY */
+#define WM8903_DRC_SMOOTH_ENA                   0x0008  /* DRC_SMOOTH_ENA */
+#define WM8903_DRC_SMOOTH_ENA_MASK              0x0008  /* DRC_SMOOTH_ENA */
+#define WM8903_DRC_SMOOTH_ENA_SHIFT                  3  /* DRC_SMOOTH_ENA */
+#define WM8903_DRC_SMOOTH_ENA_WIDTH                  1  /* DRC_SMOOTH_ENA */
+#define WM8903_DRC_QR_ENA                       0x0004  /* DRC_QR_ENA */
+#define WM8903_DRC_QR_ENA_MASK                  0x0004  /* DRC_QR_ENA */
+#define WM8903_DRC_QR_ENA_SHIFT                      2  /* DRC_QR_ENA */
+#define WM8903_DRC_QR_ENA_WIDTH                      1  /* DRC_QR_ENA */
+#define WM8903_DRC_ANTICLIP_ENA                 0x0002  /* DRC_ANTICLIP_ENA */
+#define WM8903_DRC_ANTICLIP_ENA_MASK            0x0002  /* DRC_ANTICLIP_ENA */
+#define WM8903_DRC_ANTICLIP_ENA_SHIFT                1  /* DRC_ANTICLIP_ENA */
+#define WM8903_DRC_ANTICLIP_ENA_WIDTH                1  /* DRC_ANTICLIP_ENA */
+#define WM8903_DRC_HYST_ENA                     0x0001  /* DRC_HYST_ENA */
+#define WM8903_DRC_HYST_ENA_MASK                0x0001  /* DRC_HYST_ENA */
+#define WM8903_DRC_HYST_ENA_SHIFT                    0  /* DRC_HYST_ENA */
+#define WM8903_DRC_HYST_ENA_WIDTH                    1  /* DRC_HYST_ENA */
+
+/*
+ * R41 (0x29) - DRC 1
+ */
+#define WM8903_DRC_ATTACK_RATE_MASK             0xF000  /* DRC_ATTACK_RATE - [15:12] */
+#define WM8903_DRC_ATTACK_RATE_SHIFT                12  /* DRC_ATTACK_RATE - [15:12] */
+#define WM8903_DRC_ATTACK_RATE_WIDTH                 4  /* DRC_ATTACK_RATE - [15:12] */
+#define WM8903_DRC_DECAY_RATE_MASK              0x0F00  /* DRC_DECAY_RATE - [11:8] */
+#define WM8903_DRC_DECAY_RATE_SHIFT                  8  /* DRC_DECAY_RATE - [11:8] */
+#define WM8903_DRC_DECAY_RATE_WIDTH                  4  /* DRC_DECAY_RATE - [11:8] */
+#define WM8903_DRC_THRESH_QR_MASK               0x00C0  /* DRC_THRESH_QR - [7:6] */
+#define WM8903_DRC_THRESH_QR_SHIFT                   6  /* DRC_THRESH_QR - [7:6] */
+#define WM8903_DRC_THRESH_QR_WIDTH                   2  /* DRC_THRESH_QR - [7:6] */
+#define WM8903_DRC_RATE_QR_MASK                 0x0030  /* DRC_RATE_QR - [5:4] */
+#define WM8903_DRC_RATE_QR_SHIFT                     4  /* DRC_RATE_QR - [5:4] */
+#define WM8903_DRC_RATE_QR_WIDTH                     2  /* DRC_RATE_QR - [5:4] */
+#define WM8903_DRC_MINGAIN_MASK                 0x000C  /* DRC_MINGAIN - [3:2] */
+#define WM8903_DRC_MINGAIN_SHIFT                     2  /* DRC_MINGAIN - [3:2] */
+#define WM8903_DRC_MINGAIN_WIDTH                     2  /* DRC_MINGAIN - [3:2] */
+#define WM8903_DRC_MAXGAIN_MASK                 0x0003  /* DRC_MAXGAIN - [1:0] */
+#define WM8903_DRC_MAXGAIN_SHIFT                     0  /* DRC_MAXGAIN - [1:0] */
+#define WM8903_DRC_MAXGAIN_WIDTH                     2  /* DRC_MAXGAIN - [1:0] */
+
+/*
+ * R42 (0x2A) - DRC 2
+ */
+#define WM8903_DRC_R0_SLOPE_COMP_MASK           0x0038  /* DRC_R0_SLOPE_COMP - [5:3] */
+#define WM8903_DRC_R0_SLOPE_COMP_SHIFT               3  /* DRC_R0_SLOPE_COMP - [5:3] */
+#define WM8903_DRC_R0_SLOPE_COMP_WIDTH               3  /* DRC_R0_SLOPE_COMP - [5:3] */
+#define WM8903_DRC_R1_SLOPE_COMP_MASK           0x0007  /* DRC_R1_SLOPE_COMP - [2:0] */
+#define WM8903_DRC_R1_SLOPE_COMP_SHIFT               0  /* DRC_R1_SLOPE_COMP - [2:0] */
+#define WM8903_DRC_R1_SLOPE_COMP_WIDTH               3  /* DRC_R1_SLOPE_COMP - [2:0] */
+
+/*
+ * R43 (0x2B) - DRC 3
+ */
+#define WM8903_DRC_THRESH_COMP_MASK             0x07E0  /* DRC_THRESH_COMP - [10:5] */
+#define WM8903_DRC_THRESH_COMP_SHIFT                 5  /* DRC_THRESH_COMP - [10:5] */
+#define WM8903_DRC_THRESH_COMP_WIDTH                 6  /* DRC_THRESH_COMP - [10:5] */
+#define WM8903_DRC_AMP_COMP_MASK                0x001F  /* DRC_AMP_COMP - [4:0] */
+#define WM8903_DRC_AMP_COMP_SHIFT                    0  /* DRC_AMP_COMP - [4:0] */
+#define WM8903_DRC_AMP_COMP_WIDTH                    5  /* DRC_AMP_COMP - [4:0] */
+
+/*
+ * R44 (0x2C) - Analogue Left Input 0
+ */
+#define WM8903_LINMUTE                          0x0080  /* LINMUTE */
+#define WM8903_LINMUTE_MASK                     0x0080  /* LINMUTE */
+#define WM8903_LINMUTE_SHIFT                         7  /* LINMUTE */
+#define WM8903_LINMUTE_WIDTH                         1  /* LINMUTE */
+#define WM8903_LIN_VOL_MASK                     0x001F  /* LIN_VOL - [4:0] */
+#define WM8903_LIN_VOL_SHIFT                         0  /* LIN_VOL - [4:0] */
+#define WM8903_LIN_VOL_WIDTH                         5  /* LIN_VOL - [4:0] */
+
+/*
+ * R45 (0x2D) - Analogue Right Input 0
+ */
+#define WM8903_RINMUTE                          0x0080  /* RINMUTE */
+#define WM8903_RINMUTE_MASK                     0x0080  /* RINMUTE */
+#define WM8903_RINMUTE_SHIFT                         7  /* RINMUTE */
+#define WM8903_RINMUTE_WIDTH                         1  /* RINMUTE */
+#define WM8903_RIN_VOL_MASK                     0x001F  /* RIN_VOL - [4:0] */
+#define WM8903_RIN_VOL_SHIFT                         0  /* RIN_VOL - [4:0] */
+#define WM8903_RIN_VOL_WIDTH                         5  /* RIN_VOL - [4:0] */
+
+/*
+ * R46 (0x2E) - Analogue Left Input 1
+ */
+#define WM8903_INL_CM_ENA                       0x0040  /* INL_CM_ENA */
+#define WM8903_INL_CM_ENA_MASK                  0x0040  /* INL_CM_ENA */
+#define WM8903_INL_CM_ENA_SHIFT                      6  /* INL_CM_ENA */
+#define WM8903_INL_CM_ENA_WIDTH                      1  /* INL_CM_ENA */
+#define WM8903_L_IP_SEL_N_MASK                  0x0030  /* L_IP_SEL_N - [5:4] */
+#define WM8903_L_IP_SEL_N_SHIFT                      4  /* L_IP_SEL_N - [5:4] */
+#define WM8903_L_IP_SEL_N_WIDTH                      2  /* L_IP_SEL_N - [5:4] */
+#define WM8903_L_IP_SEL_P_MASK                  0x000C  /* L_IP_SEL_P - [3:2] */
+#define WM8903_L_IP_SEL_P_SHIFT                      2  /* L_IP_SEL_P - [3:2] */
+#define WM8903_L_IP_SEL_P_WIDTH                      2  /* L_IP_SEL_P - [3:2] */
+#define WM8903_L_MODE_MASK                      0x0003  /* L_MODE - [1:0] */
+#define WM8903_L_MODE_SHIFT                          0  /* L_MODE - [1:0] */
+#define WM8903_L_MODE_WIDTH                          2  /* L_MODE - [1:0] */
+
+/*
+ * R47 (0x2F) - Analogue Right Input 1
+ */
+#define WM8903_INR_CM_ENA                       0x0040  /* INR_CM_ENA */
+#define WM8903_INR_CM_ENA_MASK                  0x0040  /* INR_CM_ENA */
+#define WM8903_INR_CM_ENA_SHIFT                      6  /* INR_CM_ENA */
+#define WM8903_INR_CM_ENA_WIDTH                      1  /* INR_CM_ENA */
+#define WM8903_R_IP_SEL_N_MASK                  0x0030  /* R_IP_SEL_N - [5:4] */
+#define WM8903_R_IP_SEL_N_SHIFT                      4  /* R_IP_SEL_N - [5:4] */
+#define WM8903_R_IP_SEL_N_WIDTH                      2  /* R_IP_SEL_N - [5:4] */
+#define WM8903_R_IP_SEL_P_MASK                  0x000C  /* R_IP_SEL_P - [3:2] */
+#define WM8903_R_IP_SEL_P_SHIFT                      2  /* R_IP_SEL_P - [3:2] */
+#define WM8903_R_IP_SEL_P_WIDTH                      2  /* R_IP_SEL_P - [3:2] */
+#define WM8903_R_MODE_MASK                      0x0003  /* R_MODE - [1:0] */
+#define WM8903_R_MODE_SHIFT                          0  /* R_MODE - [1:0] */
+#define WM8903_R_MODE_WIDTH                          2  /* R_MODE - [1:0] */
+
+/*
+ * R50 (0x32) - Analogue Left Mix 0
+ */
+#define WM8903_DACL_TO_MIXOUTL                  0x0008  /* DACL_TO_MIXOUTL */
+#define WM8903_DACL_TO_MIXOUTL_MASK             0x0008  /* DACL_TO_MIXOUTL */
+#define WM8903_DACL_TO_MIXOUTL_SHIFT                 3  /* DACL_TO_MIXOUTL */
+#define WM8903_DACL_TO_MIXOUTL_WIDTH                 1  /* DACL_TO_MIXOUTL */
+#define WM8903_DACR_TO_MIXOUTL                  0x0004  /* DACR_TO_MIXOUTL */
+#define WM8903_DACR_TO_MIXOUTL_MASK             0x0004  /* DACR_TO_MIXOUTL */
+#define WM8903_DACR_TO_MIXOUTL_SHIFT                 2  /* DACR_TO_MIXOUTL */
+#define WM8903_DACR_TO_MIXOUTL_WIDTH                 1  /* DACR_TO_MIXOUTL */
+#define WM8903_BYPASSL_TO_MIXOUTL               0x0002  /* BYPASSL_TO_MIXOUTL */
+#define WM8903_BYPASSL_TO_MIXOUTL_MASK          0x0002  /* BYPASSL_TO_MIXOUTL */
+#define WM8903_BYPASSL_TO_MIXOUTL_SHIFT              1  /* BYPASSL_TO_MIXOUTL */
+#define WM8903_BYPASSL_TO_MIXOUTL_WIDTH              1  /* BYPASSL_TO_MIXOUTL */
+#define WM8903_BYPASSR_TO_MIXOUTL               0x0001  /* BYPASSR_TO_MIXOUTL */
+#define WM8903_BYPASSR_TO_MIXOUTL_MASK          0x0001  /* BYPASSR_TO_MIXOUTL */
+#define WM8903_BYPASSR_TO_MIXOUTL_SHIFT              0  /* BYPASSR_TO_MIXOUTL */
+#define WM8903_BYPASSR_TO_MIXOUTL_WIDTH              1  /* BYPASSR_TO_MIXOUTL */
+
+/*
+ * R51 (0x33) - Analogue Right Mix 0
+ */
+#define WM8903_DACL_TO_MIXOUTR                  0x0008  /* DACL_TO_MIXOUTR */
+#define WM8903_DACL_TO_MIXOUTR_MASK             0x0008  /* DACL_TO_MIXOUTR */
+#define WM8903_DACL_TO_MIXOUTR_SHIFT                 3  /* DACL_TO_MIXOUTR */
+#define WM8903_DACL_TO_MIXOUTR_WIDTH                 1  /* DACL_TO_MIXOUTR */
+#define WM8903_DACR_TO_MIXOUTR                  0x0004  /* DACR_TO_MIXOUTR */
+#define WM8903_DACR_TO_MIXOUTR_MASK             0x0004  /* DACR_TO_MIXOUTR */
+#define WM8903_DACR_TO_MIXOUTR_SHIFT                 2  /* DACR_TO_MIXOUTR */
+#define WM8903_DACR_TO_MIXOUTR_WIDTH                 1  /* DACR_TO_MIXOUTR */
+#define WM8903_BYPASSL_TO_MIXOUTR               0x0002  /* BYPASSL_TO_MIXOUTR */
+#define WM8903_BYPASSL_TO_MIXOUTR_MASK          0x0002  /* BYPASSL_TO_MIXOUTR */
+#define WM8903_BYPASSL_TO_MIXOUTR_SHIFT              1  /* BYPASSL_TO_MIXOUTR */
+#define WM8903_BYPASSL_TO_MIXOUTR_WIDTH              1  /* BYPASSL_TO_MIXOUTR */
+#define WM8903_BYPASSR_TO_MIXOUTR               0x0001  /* BYPASSR_TO_MIXOUTR */
+#define WM8903_BYPASSR_TO_MIXOUTR_MASK          0x0001  /* BYPASSR_TO_MIXOUTR */
+#define WM8903_BYPASSR_TO_MIXOUTR_SHIFT              0  /* BYPASSR_TO_MIXOUTR */
+#define WM8903_BYPASSR_TO_MIXOUTR_WIDTH              1  /* BYPASSR_TO_MIXOUTR */
+
+/*
+ * R52 (0x34) - Analogue Spk Mix Left 0
+ */
+#define WM8903_DACL_TO_MIXSPKL                  0x0008  /* DACL_TO_MIXSPKL */
+#define WM8903_DACL_TO_MIXSPKL_MASK             0x0008  /* DACL_TO_MIXSPKL */
+#define WM8903_DACL_TO_MIXSPKL_SHIFT                 3  /* DACL_TO_MIXSPKL */
+#define WM8903_DACL_TO_MIXSPKL_WIDTH                 1  /* DACL_TO_MIXSPKL */
+#define WM8903_DACR_TO_MIXSPKL                  0x0004  /* DACR_TO_MIXSPKL */
+#define WM8903_DACR_TO_MIXSPKL_MASK             0x0004  /* DACR_TO_MIXSPKL */
+#define WM8903_DACR_TO_MIXSPKL_SHIFT                 2  /* DACR_TO_MIXSPKL */
+#define WM8903_DACR_TO_MIXSPKL_WIDTH                 1  /* DACR_TO_MIXSPKL */
+#define WM8903_BYPASSL_TO_MIXSPKL               0x0002  /* BYPASSL_TO_MIXSPKL */
+#define WM8903_BYPASSL_TO_MIXSPKL_MASK          0x0002  /* BYPASSL_TO_MIXSPKL */
+#define WM8903_BYPASSL_TO_MIXSPKL_SHIFT              1  /* BYPASSL_TO_MIXSPKL */
+#define WM8903_BYPASSL_TO_MIXSPKL_WIDTH              1  /* BYPASSL_TO_MIXSPKL */
+#define WM8903_BYPASSR_TO_MIXSPKL               0x0001  /* BYPASSR_TO_MIXSPKL */
+#define WM8903_BYPASSR_TO_MIXSPKL_MASK          0x0001  /* BYPASSR_TO_MIXSPKL */
+#define WM8903_BYPASSR_TO_MIXSPKL_SHIFT              0  /* BYPASSR_TO_MIXSPKL */
+#define WM8903_BYPASSR_TO_MIXSPKL_WIDTH              1  /* BYPASSR_TO_MIXSPKL */
+
+/*
+ * R53 (0x35) - Analogue Spk Mix Left 1
+ */
+#define WM8903_DACL_MIXSPKL_VOL                 0x0008  /* DACL_MIXSPKL_VOL */
+#define WM8903_DACL_MIXSPKL_VOL_MASK            0x0008  /* DACL_MIXSPKL_VOL */
+#define WM8903_DACL_MIXSPKL_VOL_SHIFT                3  /* DACL_MIXSPKL_VOL */
+#define WM8903_DACL_MIXSPKL_VOL_WIDTH                1  /* DACL_MIXSPKL_VOL */
+#define WM8903_DACR_MIXSPKL_VOL                 0x0004  /* DACR_MIXSPKL_VOL */
+#define WM8903_DACR_MIXSPKL_VOL_MASK            0x0004  /* DACR_MIXSPKL_VOL */
+#define WM8903_DACR_MIXSPKL_VOL_SHIFT                2  /* DACR_MIXSPKL_VOL */
+#define WM8903_DACR_MIXSPKL_VOL_WIDTH                1  /* DACR_MIXSPKL_VOL */
+#define WM8903_BYPASSL_MIXSPKL_VOL              0x0002  /* BYPASSL_MIXSPKL_VOL */
+#define WM8903_BYPASSL_MIXSPKL_VOL_MASK         0x0002  /* BYPASSL_MIXSPKL_VOL */
+#define WM8903_BYPASSL_MIXSPKL_VOL_SHIFT             1  /* BYPASSL_MIXSPKL_VOL */
+#define WM8903_BYPASSL_MIXSPKL_VOL_WIDTH             1  /* BYPASSL_MIXSPKL_VOL */
+#define WM8903_BYPASSR_MIXSPKL_VOL              0x0001  /* BYPASSR_MIXSPKL_VOL */
+#define WM8903_BYPASSR_MIXSPKL_VOL_MASK         0x0001  /* BYPASSR_MIXSPKL_VOL */
+#define WM8903_BYPASSR_MIXSPKL_VOL_SHIFT             0  /* BYPASSR_MIXSPKL_VOL */
+#define WM8903_BYPASSR_MIXSPKL_VOL_WIDTH             1  /* BYPASSR_MIXSPKL_VOL */
+
+/*
+ * R54 (0x36) - Analogue Spk Mix Right 0
+ */
+#define WM8903_DACL_TO_MIXSPKR                  0x0008  /* DACL_TO_MIXSPKR */
+#define WM8903_DACL_TO_MIXSPKR_MASK             0x0008  /* DACL_TO_MIXSPKR */
+#define WM8903_DACL_TO_MIXSPKR_SHIFT                 3  /* DACL_TO_MIXSPKR */
+#define WM8903_DACL_TO_MIXSPKR_WIDTH                 1  /* DACL_TO_MIXSPKR */
+#define WM8903_DACR_TO_MIXSPKR                  0x0004  /* DACR_TO_MIXSPKR */
+#define WM8903_DACR_TO_MIXSPKR_MASK             0x0004  /* DACR_TO_MIXSPKR */
+#define WM8903_DACR_TO_MIXSPKR_SHIFT                 2  /* DACR_TO_MIXSPKR */
+#define WM8903_DACR_TO_MIXSPKR_WIDTH                 1  /* DACR_TO_MIXSPKR */
+#define WM8903_BYPASSL_TO_MIXSPKR               0x0002  /* BYPASSL_TO_MIXSPKR */
+#define WM8903_BYPASSL_TO_MIXSPKR_MASK          0x0002  /* BYPASSL_TO_MIXSPKR */
+#define WM8903_BYPASSL_TO_MIXSPKR_SHIFT              1  /* BYPASSL_TO_MIXSPKR */
+#define WM8903_BYPASSL_TO_MIXSPKR_WIDTH              1  /* BYPASSL_TO_MIXSPKR */
+#define WM8903_BYPASSR_TO_MIXSPKR               0x0001  /* BYPASSR_TO_MIXSPKR */
+#define WM8903_BYPASSR_TO_MIXSPKR_MASK          0x0001  /* BYPASSR_TO_MIXSPKR */
+#define WM8903_BYPASSR_TO_MIXSPKR_SHIFT              0  /* BYPASSR_TO_MIXSPKR */
+#define WM8903_BYPASSR_TO_MIXSPKR_WIDTH              1  /* BYPASSR_TO_MIXSPKR */
+
+/*
+ * R55 (0x37) - Analogue Spk Mix Right 1
+ */
+#define WM8903_DACL_MIXSPKR_VOL                 0x0008  /* DACL_MIXSPKR_VOL */
+#define WM8903_DACL_MIXSPKR_VOL_MASK            0x0008  /* DACL_MIXSPKR_VOL */
+#define WM8903_DACL_MIXSPKR_VOL_SHIFT                3  /* DACL_MIXSPKR_VOL */
+#define WM8903_DACL_MIXSPKR_VOL_WIDTH                1  /* DACL_MIXSPKR_VOL */
+#define WM8903_DACR_MIXSPKR_VOL                 0x0004  /* DACR_MIXSPKR_VOL */
+#define WM8903_DACR_MIXSPKR_VOL_MASK            0x0004  /* DACR_MIXSPKR_VOL */
+#define WM8903_DACR_MIXSPKR_VOL_SHIFT                2  /* DACR_MIXSPKR_VOL */
+#define WM8903_DACR_MIXSPKR_VOL_WIDTH                1  /* DACR_MIXSPKR_VOL */
+#define WM8903_BYPASSL_MIXSPKR_VOL              0x0002  /* BYPASSL_MIXSPKR_VOL */
+#define WM8903_BYPASSL_MIXSPKR_VOL_MASK         0x0002  /* BYPASSL_MIXSPKR_VOL */
+#define WM8903_BYPASSL_MIXSPKR_VOL_SHIFT             1  /* BYPASSL_MIXSPKR_VOL */
+#define WM8903_BYPASSL_MIXSPKR_VOL_WIDTH             1  /* BYPASSL_MIXSPKR_VOL */
+#define WM8903_BYPASSR_MIXSPKR_VOL              0x0001  /* BYPASSR_MIXSPKR_VOL */
+#define WM8903_BYPASSR_MIXSPKR_VOL_MASK         0x0001  /* BYPASSR_MIXSPKR_VOL */
+#define WM8903_BYPASSR_MIXSPKR_VOL_SHIFT             0  /* BYPASSR_MIXSPKR_VOL */
+#define WM8903_BYPASSR_MIXSPKR_VOL_WIDTH             1  /* BYPASSR_MIXSPKR_VOL */
+
+/*
+ * R57 (0x39) - Analogue OUT1 Left
+ */
+#define WM8903_HPL_MUTE                         0x0100  /* HPL_MUTE */
+#define WM8903_HPL_MUTE_MASK                    0x0100  /* HPL_MUTE */
+#define WM8903_HPL_MUTE_SHIFT                        8  /* HPL_MUTE */
+#define WM8903_HPL_MUTE_WIDTH                        1  /* HPL_MUTE */
+#define WM8903_HPOUTVU                          0x0080  /* HPOUTVU */
+#define WM8903_HPOUTVU_MASK                     0x0080  /* HPOUTVU */
+#define WM8903_HPOUTVU_SHIFT                         7  /* HPOUTVU */
+#define WM8903_HPOUTVU_WIDTH                         1  /* HPOUTVU */
+#define WM8903_HPOUTLZC                         0x0040  /* HPOUTLZC */
+#define WM8903_HPOUTLZC_MASK                    0x0040  /* HPOUTLZC */
+#define WM8903_HPOUTLZC_SHIFT                        6  /* HPOUTLZC */
+#define WM8903_HPOUTLZC_WIDTH                        1  /* HPOUTLZC */
+#define WM8903_HPOUTL_VOL_MASK                  0x003F  /* HPOUTL_VOL - [5:0] */
+#define WM8903_HPOUTL_VOL_SHIFT                      0  /* HPOUTL_VOL - [5:0] */
+#define WM8903_HPOUTL_VOL_WIDTH                      6  /* HPOUTL_VOL - [5:0] */
+
+/*
+ * R58 (0x3A) - Analogue OUT1 Right
+ */
+#define WM8903_HPR_MUTE                         0x0100  /* HPR_MUTE */
+#define WM8903_HPR_MUTE_MASK                    0x0100  /* HPR_MUTE */
+#define WM8903_HPR_MUTE_SHIFT                        8  /* HPR_MUTE */
+#define WM8903_HPR_MUTE_WIDTH                        1  /* HPR_MUTE */
+#define WM8903_HPOUTVU                          0x0080  /* HPOUTVU */
+#define WM8903_HPOUTVU_MASK                     0x0080  /* HPOUTVU */
+#define WM8903_HPOUTVU_SHIFT                         7  /* HPOUTVU */
+#define WM8903_HPOUTVU_WIDTH                         1  /* HPOUTVU */
+#define WM8903_HPOUTRZC                         0x0040  /* HPOUTRZC */
+#define WM8903_HPOUTRZC_MASK                    0x0040  /* HPOUTRZC */
+#define WM8903_HPOUTRZC_SHIFT                        6  /* HPOUTRZC */
+#define WM8903_HPOUTRZC_WIDTH                        1  /* HPOUTRZC */
+#define WM8903_HPOUTR_VOL_MASK                  0x003F  /* HPOUTR_VOL - [5:0] */
+#define WM8903_HPOUTR_VOL_SHIFT                      0  /* HPOUTR_VOL - [5:0] */
+#define WM8903_HPOUTR_VOL_WIDTH                      6  /* HPOUTR_VOL - [5:0] */
+
+/*
+ * R59 (0x3B) - Analogue OUT2 Left
+ */
+#define WM8903_LINEOUTL_MUTE                    0x0100  /* LINEOUTL_MUTE */
+#define WM8903_LINEOUTL_MUTE_MASK               0x0100  /* LINEOUTL_MUTE */
+#define WM8903_LINEOUTL_MUTE_SHIFT                   8  /* LINEOUTL_MUTE */
+#define WM8903_LINEOUTL_MUTE_WIDTH                   1  /* LINEOUTL_MUTE */
+#define WM8903_LINEOUTVU                        0x0080  /* LINEOUTVU */
+#define WM8903_LINEOUTVU_MASK                   0x0080  /* LINEOUTVU */
+#define WM8903_LINEOUTVU_SHIFT                       7  /* LINEOUTVU */
+#define WM8903_LINEOUTVU_WIDTH                       1  /* LINEOUTVU */
+#define WM8903_LINEOUTLZC                       0x0040  /* LINEOUTLZC */
+#define WM8903_LINEOUTLZC_MASK                  0x0040  /* LINEOUTLZC */
+#define WM8903_LINEOUTLZC_SHIFT                      6  /* LINEOUTLZC */
+#define WM8903_LINEOUTLZC_WIDTH                      1  /* LINEOUTLZC */
+#define WM8903_LINEOUTL_VOL_MASK                0x003F  /* LINEOUTL_VOL - [5:0] */
+#define WM8903_LINEOUTL_VOL_SHIFT                    0  /* LINEOUTL_VOL - [5:0] */
+#define WM8903_LINEOUTL_VOL_WIDTH                    6  /* LINEOUTL_VOL - [5:0] */
+
+/*
+ * R60 (0x3C) - Analogue OUT2 Right
+ */
+#define WM8903_LINEOUTR_MUTE                    0x0100  /* LINEOUTR_MUTE */
+#define WM8903_LINEOUTR_MUTE_MASK               0x0100  /* LINEOUTR_MUTE */
+#define WM8903_LINEOUTR_MUTE_SHIFT                   8  /* LINEOUTR_MUTE */
+#define WM8903_LINEOUTR_MUTE_WIDTH                   1  /* LINEOUTR_MUTE */
+#define WM8903_LINEOUTVU                        0x0080  /* LINEOUTVU */
+#define WM8903_LINEOUTVU_MASK                   0x0080  /* LINEOUTVU */
+#define WM8903_LINEOUTVU_SHIFT                       7  /* LINEOUTVU */
+#define WM8903_LINEOUTVU_WIDTH                       1  /* LINEOUTVU */
+#define WM8903_LINEOUTRZC                       0x0040  /* LINEOUTRZC */
+#define WM8903_LINEOUTRZC_MASK                  0x0040  /* LINEOUTRZC */
+#define WM8903_LINEOUTRZC_SHIFT                      6  /* LINEOUTRZC */
+#define WM8903_LINEOUTRZC_WIDTH                      1  /* LINEOUTRZC */
+#define WM8903_LINEOUTR_VOL_MASK                0x003F  /* LINEOUTR_VOL - [5:0] */
+#define WM8903_LINEOUTR_VOL_SHIFT                    0  /* LINEOUTR_VOL - [5:0] */
+#define WM8903_LINEOUTR_VOL_WIDTH                    6  /* LINEOUTR_VOL - [5:0] */
+
+/*
+ * R62 (0x3E) - Analogue OUT3 Left
+ */
+#define WM8903_SPKL_MUTE                        0x0100  /* SPKL_MUTE */
+#define WM8903_SPKL_MUTE_MASK                   0x0100  /* SPKL_MUTE */
+#define WM8903_SPKL_MUTE_SHIFT                       8  /* SPKL_MUTE */
+#define WM8903_SPKL_MUTE_WIDTH                       1  /* SPKL_MUTE */
+#define WM8903_SPKVU                            0x0080  /* SPKVU */
+#define WM8903_SPKVU_MASK                       0x0080  /* SPKVU */
+#define WM8903_SPKVU_SHIFT                           7  /* SPKVU */
+#define WM8903_SPKVU_WIDTH                           1  /* SPKVU */
+#define WM8903_SPKLZC                           0x0040  /* SPKLZC */
+#define WM8903_SPKLZC_MASK                      0x0040  /* SPKLZC */
+#define WM8903_SPKLZC_SHIFT                          6  /* SPKLZC */
+#define WM8903_SPKLZC_WIDTH                          1  /* SPKLZC */
+#define WM8903_SPKL_VOL_MASK                    0x003F  /* SPKL_VOL - [5:0] */
+#define WM8903_SPKL_VOL_SHIFT                        0  /* SPKL_VOL - [5:0] */
+#define WM8903_SPKL_VOL_WIDTH                        6  /* SPKL_VOL - [5:0] */
+
+/*
+ * R63 (0x3F) - Analogue OUT3 Right
+ */
+#define WM8903_SPKR_MUTE                        0x0100  /* SPKR_MUTE */
+#define WM8903_SPKR_MUTE_MASK                   0x0100  /* SPKR_MUTE */
+#define WM8903_SPKR_MUTE_SHIFT                       8  /* SPKR_MUTE */
+#define WM8903_SPKR_MUTE_WIDTH                       1  /* SPKR_MUTE */
+#define WM8903_SPKVU                            0x0080  /* SPKVU */
+#define WM8903_SPKVU_MASK                       0x0080  /* SPKVU */
+#define WM8903_SPKVU_SHIFT                           7  /* SPKVU */
+#define WM8903_SPKVU_WIDTH                           1  /* SPKVU */
+#define WM8903_SPKRZC                           0x0040  /* SPKRZC */
+#define WM8903_SPKRZC_MASK                      0x0040  /* SPKRZC */
+#define WM8903_SPKRZC_SHIFT                          6  /* SPKRZC */
+#define WM8903_SPKRZC_WIDTH                          1  /* SPKRZC */
+#define WM8903_SPKR_VOL_MASK                    0x003F  /* SPKR_VOL - [5:0] */
+#define WM8903_SPKR_VOL_SHIFT                        0  /* SPKR_VOL - [5:0] */
+#define WM8903_SPKR_VOL_WIDTH                        6  /* SPKR_VOL - [5:0] */
+
+/*
+ * R65 (0x41) - Analogue SPK Output Control 0
+ */
+#define WM8903_SPK_DISCHARGE                    0x0002  /* SPK_DISCHARGE */
+#define WM8903_SPK_DISCHARGE_MASK               0x0002  /* SPK_DISCHARGE */
+#define WM8903_SPK_DISCHARGE_SHIFT                   1  /* SPK_DISCHARGE */
+#define WM8903_SPK_DISCHARGE_WIDTH                   1  /* SPK_DISCHARGE */
+#define WM8903_VROI                             0x0001  /* VROI */
+#define WM8903_VROI_MASK                        0x0001  /* VROI */
+#define WM8903_VROI_SHIFT                            0  /* VROI */
+#define WM8903_VROI_WIDTH                            1  /* VROI */
+
+/*
+ * R67 (0x43) - DC Servo 0
+ */
+#define WM8903_DCS_MASTER_ENA                   0x0010  /* DCS_MASTER_ENA */
+#define WM8903_DCS_MASTER_ENA_MASK              0x0010  /* DCS_MASTER_ENA */
+#define WM8903_DCS_MASTER_ENA_SHIFT                  4  /* DCS_MASTER_ENA */
+#define WM8903_DCS_MASTER_ENA_WIDTH                  1  /* DCS_MASTER_ENA */
+#define WM8903_DCS_ENA_MASK                     0x000F  /* DCS_ENA - [3:0] */
+#define WM8903_DCS_ENA_SHIFT                         0  /* DCS_ENA - [3:0] */
+#define WM8903_DCS_ENA_WIDTH                         4  /* DCS_ENA - [3:0] */
+
+/*
+ * R69 (0x45) - DC Servo 2
+ */
+#define WM8903_DCS_MODE_MASK                    0x0003  /* DCS_MODE - [1:0] */
+#define WM8903_DCS_MODE_SHIFT                        0  /* DCS_MODE - [1:0] */
+#define WM8903_DCS_MODE_WIDTH                        2  /* DCS_MODE - [1:0] */
+
+/*
+ * R90 (0x5A) - Analogue HP 0
+ */
+#define WM8903_HPL_RMV_SHORT                    0x0080  /* HPL_RMV_SHORT */
+#define WM8903_HPL_RMV_SHORT_MASK               0x0080  /* HPL_RMV_SHORT */
+#define WM8903_HPL_RMV_SHORT_SHIFT                   7  /* HPL_RMV_SHORT */
+#define WM8903_HPL_RMV_SHORT_WIDTH                   1  /* HPL_RMV_SHORT */
+#define WM8903_HPL_ENA_OUTP                     0x0040  /* HPL_ENA_OUTP */
+#define WM8903_HPL_ENA_OUTP_MASK                0x0040  /* HPL_ENA_OUTP */
+#define WM8903_HPL_ENA_OUTP_SHIFT                    6  /* HPL_ENA_OUTP */
+#define WM8903_HPL_ENA_OUTP_WIDTH                    1  /* HPL_ENA_OUTP */
+#define WM8903_HPL_ENA_DLY                      0x0020  /* HPL_ENA_DLY */
+#define WM8903_HPL_ENA_DLY_MASK                 0x0020  /* HPL_ENA_DLY */
+#define WM8903_HPL_ENA_DLY_SHIFT                     5  /* HPL_ENA_DLY */
+#define WM8903_HPL_ENA_DLY_WIDTH                     1  /* HPL_ENA_DLY */
+#define WM8903_HPL_ENA                          0x0010  /* HPL_ENA */
+#define WM8903_HPL_ENA_MASK                     0x0010  /* HPL_ENA */
+#define WM8903_HPL_ENA_SHIFT                         4  /* HPL_ENA */
+#define WM8903_HPL_ENA_WIDTH                         1  /* HPL_ENA */
+#define WM8903_HPR_RMV_SHORT                    0x0008  /* HPR_RMV_SHORT */
+#define WM8903_HPR_RMV_SHORT_MASK               0x0008  /* HPR_RMV_SHORT */
+#define WM8903_HPR_RMV_SHORT_SHIFT                   3  /* HPR_RMV_SHORT */
+#define WM8903_HPR_RMV_SHORT_WIDTH                   1  /* HPR_RMV_SHORT */
+#define WM8903_HPR_ENA_OUTP                     0x0004  /* HPR_ENA_OUTP */
+#define WM8903_HPR_ENA_OUTP_MASK                0x0004  /* HPR_ENA_OUTP */
+#define WM8903_HPR_ENA_OUTP_SHIFT                    2  /* HPR_ENA_OUTP */
+#define WM8903_HPR_ENA_OUTP_WIDTH                    1  /* HPR_ENA_OUTP */
+#define WM8903_HPR_ENA_DLY                      0x0002  /* HPR_ENA_DLY */
+#define WM8903_HPR_ENA_DLY_MASK                 0x0002  /* HPR_ENA_DLY */
+#define WM8903_HPR_ENA_DLY_SHIFT                     1  /* HPR_ENA_DLY */
+#define WM8903_HPR_ENA_DLY_WIDTH                     1  /* HPR_ENA_DLY */
+#define WM8903_HPR_ENA                          0x0001  /* HPR_ENA */
+#define WM8903_HPR_ENA_MASK                     0x0001  /* HPR_ENA */
+#define WM8903_HPR_ENA_SHIFT                         0  /* HPR_ENA */
+#define WM8903_HPR_ENA_WIDTH                         1  /* HPR_ENA */
+
+/*
+ * R94 (0x5E) - Analogue Lineout 0
+ */
+#define WM8903_LINEOUTL_RMV_SHORT               0x0080  /* LINEOUTL_RMV_SHORT */
+#define WM8903_LINEOUTL_RMV_SHORT_MASK          0x0080  /* LINEOUTL_RMV_SHORT */
+#define WM8903_LINEOUTL_RMV_SHORT_SHIFT              7  /* LINEOUTL_RMV_SHORT */
+#define WM8903_LINEOUTL_RMV_SHORT_WIDTH              1  /* LINEOUTL_RMV_SHORT */
+#define WM8903_LINEOUTL_ENA_OUTP                0x0040  /* LINEOUTL_ENA_OUTP */
+#define WM8903_LINEOUTL_ENA_OUTP_MASK           0x0040  /* LINEOUTL_ENA_OUTP */
+#define WM8903_LINEOUTL_ENA_OUTP_SHIFT               6  /* LINEOUTL_ENA_OUTP */
+#define WM8903_LINEOUTL_ENA_OUTP_WIDTH               1  /* LINEOUTL_ENA_OUTP */
+#define WM8903_LINEOUTL_ENA_DLY                 0x0020  /* LINEOUTL_ENA_DLY */
+#define WM8903_LINEOUTL_ENA_DLY_MASK            0x0020  /* LINEOUTL_ENA_DLY */
+#define WM8903_LINEOUTL_ENA_DLY_SHIFT                5  /* LINEOUTL_ENA_DLY */
+#define WM8903_LINEOUTL_ENA_DLY_WIDTH                1  /* LINEOUTL_ENA_DLY */
+#define WM8903_LINEOUTL_ENA                     0x0010  /* LINEOUTL_ENA */
+#define WM8903_LINEOUTL_ENA_MASK                0x0010  /* LINEOUTL_ENA */
+#define WM8903_LINEOUTL_ENA_SHIFT                    4  /* LINEOUTL_ENA */
+#define WM8903_LINEOUTL_ENA_WIDTH                    1  /* LINEOUTL_ENA */
+#define WM8903_LINEOUTR_RMV_SHORT               0x0008  /* LINEOUTR_RMV_SHORT */
+#define WM8903_LINEOUTR_RMV_SHORT_MASK          0x0008  /* LINEOUTR_RMV_SHORT */
+#define WM8903_LINEOUTR_RMV_SHORT_SHIFT              3  /* LINEOUTR_RMV_SHORT */
+#define WM8903_LINEOUTR_RMV_SHORT_WIDTH              1  /* LINEOUTR_RMV_SHORT */
+#define WM8903_LINEOUTR_ENA_OUTP                0x0004  /* LINEOUTR_ENA_OUTP */
+#define WM8903_LINEOUTR_ENA_OUTP_MASK           0x0004  /* LINEOUTR_ENA_OUTP */
+#define WM8903_LINEOUTR_ENA_OUTP_SHIFT               2  /* LINEOUTR_ENA_OUTP */
+#define WM8903_LINEOUTR_ENA_OUTP_WIDTH               1  /* LINEOUTR_ENA_OUTP */
+#define WM8903_LINEOUTR_ENA_DLY                 0x0002  /* LINEOUTR_ENA_DLY */
+#define WM8903_LINEOUTR_ENA_DLY_MASK            0x0002  /* LINEOUTR_ENA_DLY */
+#define WM8903_LINEOUTR_ENA_DLY_SHIFT                1  /* LINEOUTR_ENA_DLY */
+#define WM8903_LINEOUTR_ENA_DLY_WIDTH                1  /* LINEOUTR_ENA_DLY */
+#define WM8903_LINEOUTR_ENA                     0x0001  /* LINEOUTR_ENA */
+#define WM8903_LINEOUTR_ENA_MASK                0x0001  /* LINEOUTR_ENA */
+#define WM8903_LINEOUTR_ENA_SHIFT                    0  /* LINEOUTR_ENA */
+#define WM8903_LINEOUTR_ENA_WIDTH                    1  /* LINEOUTR_ENA */
+
+/*
+ * R98 (0x62) - Charge Pump 0
+ */
+#define WM8903_CP_ENA                           0x0001  /* CP_ENA */
+#define WM8903_CP_ENA_MASK                      0x0001  /* CP_ENA */
+#define WM8903_CP_ENA_SHIFT                          0  /* CP_ENA */
+#define WM8903_CP_ENA_WIDTH                          1  /* CP_ENA */
+
+/*
+ * R104 (0x68) - Class W 0
+ */
+#define WM8903_CP_DYN_FREQ                      0x0002  /* CP_DYN_FREQ */
+#define WM8903_CP_DYN_FREQ_MASK                 0x0002  /* CP_DYN_FREQ */
+#define WM8903_CP_DYN_FREQ_SHIFT                     1  /* CP_DYN_FREQ */
+#define WM8903_CP_DYN_FREQ_WIDTH                     1  /* CP_DYN_FREQ */
+#define WM8903_CP_DYN_V                         0x0001  /* CP_DYN_V */
+#define WM8903_CP_DYN_V_MASK                    0x0001  /* CP_DYN_V */
+#define WM8903_CP_DYN_V_SHIFT                        0  /* CP_DYN_V */
+#define WM8903_CP_DYN_V_WIDTH                        1  /* CP_DYN_V */
+
+/*
+ * R108 (0x6C) - Write Sequencer 0
+ */
+#define WM8903_WSEQ_ENA                         0x0100  /* WSEQ_ENA */
+#define WM8903_WSEQ_ENA_MASK                    0x0100  /* WSEQ_ENA */
+#define WM8903_WSEQ_ENA_SHIFT                        8  /* WSEQ_ENA */
+#define WM8903_WSEQ_ENA_WIDTH                        1  /* WSEQ_ENA */
+#define WM8903_WSEQ_WRITE_INDEX_MASK            0x001F  /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8903_WSEQ_WRITE_INDEX_SHIFT                0  /* WSEQ_WRITE_INDEX - [4:0] */
+#define WM8903_WSEQ_WRITE_INDEX_WIDTH                5  /* WSEQ_WRITE_INDEX - [4:0] */
+
+/*
+ * R109 (0x6D) - Write Sequencer 1
+ */
+#define WM8903_WSEQ_DATA_WIDTH_MASK             0x7000  /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8903_WSEQ_DATA_WIDTH_SHIFT                12  /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8903_WSEQ_DATA_WIDTH_WIDTH                 3  /* WSEQ_DATA_WIDTH - [14:12] */
+#define WM8903_WSEQ_DATA_START_MASK             0x0F00  /* WSEQ_DATA_START - [11:8] */
+#define WM8903_WSEQ_DATA_START_SHIFT                 8  /* WSEQ_DATA_START - [11:8] */
+#define WM8903_WSEQ_DATA_START_WIDTH                 4  /* WSEQ_DATA_START - [11:8] */
+#define WM8903_WSEQ_ADDR_MASK                   0x00FF  /* WSEQ_ADDR - [7:0] */
+#define WM8903_WSEQ_ADDR_SHIFT                       0  /* WSEQ_ADDR - [7:0] */
+#define WM8903_WSEQ_ADDR_WIDTH                       8  /* WSEQ_ADDR - [7:0] */
+
+/*
+ * R110 (0x6E) - Write Sequencer 2
+ */
+#define WM8903_WSEQ_EOS                         0x4000  /* WSEQ_EOS */
+#define WM8903_WSEQ_EOS_MASK                    0x4000  /* WSEQ_EOS */
+#define WM8903_WSEQ_EOS_SHIFT                       14  /* WSEQ_EOS */
+#define WM8903_WSEQ_EOS_WIDTH                        1  /* WSEQ_EOS */
+#define WM8903_WSEQ_DELAY_MASK                  0x0F00  /* WSEQ_DELAY - [11:8] */
+#define WM8903_WSEQ_DELAY_SHIFT                      8  /* WSEQ_DELAY - [11:8] */
+#define WM8903_WSEQ_DELAY_WIDTH                      4  /* WSEQ_DELAY - [11:8] */
+#define WM8903_WSEQ_DATA_MASK                   0x00FF  /* WSEQ_DATA - [7:0] */
+#define WM8903_WSEQ_DATA_SHIFT                       0  /* WSEQ_DATA - [7:0] */
+#define WM8903_WSEQ_DATA_WIDTH                       8  /* WSEQ_DATA - [7:0] */
+
+/*
+ * R111 (0x6F) - Write Sequencer 3
+ */
+#define WM8903_WSEQ_ABORT                       0x0200  /* WSEQ_ABORT */
+#define WM8903_WSEQ_ABORT_MASK                  0x0200  /* WSEQ_ABORT */
+#define WM8903_WSEQ_ABORT_SHIFT                      9  /* WSEQ_ABORT */
+#define WM8903_WSEQ_ABORT_WIDTH                      1  /* WSEQ_ABORT */
+#define WM8903_WSEQ_START                       0x0100  /* WSEQ_START */
+#define WM8903_WSEQ_START_MASK                  0x0100  /* WSEQ_START */
+#define WM8903_WSEQ_START_SHIFT                      8  /* WSEQ_START */
+#define WM8903_WSEQ_START_WIDTH                      1  /* WSEQ_START */
+#define WM8903_WSEQ_START_INDEX_MASK            0x003F  /* WSEQ_START_INDEX - [5:0] */
+#define WM8903_WSEQ_START_INDEX_SHIFT                0  /* WSEQ_START_INDEX - [5:0] */
+#define WM8903_WSEQ_START_INDEX_WIDTH                6  /* WSEQ_START_INDEX - [5:0] */
+
+/*
+ * R112 (0x70) - Write Sequencer 4
+ */
+#define WM8903_WSEQ_CURRENT_INDEX_MASK          0x03F0  /* WSEQ_CURRENT_INDEX - [9:4] */
+#define WM8903_WSEQ_CURRENT_INDEX_SHIFT              4  /* WSEQ_CURRENT_INDEX - [9:4] */
+#define WM8903_WSEQ_CURRENT_INDEX_WIDTH              6  /* WSEQ_CURRENT_INDEX - [9:4] */
+#define WM8903_WSEQ_BUSY                        0x0001  /* WSEQ_BUSY */
+#define WM8903_WSEQ_BUSY_MASK                   0x0001  /* WSEQ_BUSY */
+#define WM8903_WSEQ_BUSY_SHIFT                       0  /* WSEQ_BUSY */
+#define WM8903_WSEQ_BUSY_WIDTH                       1  /* WSEQ_BUSY */
+
+/*
+ * R114 (0x72) - Control Interface
+ */
+#define WM8903_MASK_WRITE_ENA                   0x0001  /* MASK_WRITE_ENA */
+#define WM8903_MASK_WRITE_ENA_MASK              0x0001  /* MASK_WRITE_ENA */
+#define WM8903_MASK_WRITE_ENA_SHIFT                  0  /* MASK_WRITE_ENA */
+#define WM8903_MASK_WRITE_ENA_WIDTH                  1  /* MASK_WRITE_ENA */
+
+/*
+ * R116 (0x74) - GPIO Control 1
+ */
+#define WM8903_GP1_FN_MASK                      0x1F00  /* GP1_FN - [12:8] */
+#define WM8903_GP1_FN_SHIFT                          8  /* GP1_FN - [12:8] */
+#define WM8903_GP1_FN_WIDTH                          5  /* GP1_FN - [12:8] */
+#define WM8903_GP1_DIR                          0x0080  /* GP1_DIR */
+#define WM8903_GP1_DIR_MASK                     0x0080  /* GP1_DIR */
+#define WM8903_GP1_DIR_SHIFT                         7  /* GP1_DIR */
+#define WM8903_GP1_DIR_WIDTH                         1  /* GP1_DIR */
+#define WM8903_GP1_OP_CFG                       0x0040  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_MASK                  0x0040  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_SHIFT                      6  /* GP1_OP_CFG */
+#define WM8903_GP1_OP_CFG_WIDTH                      1  /* GP1_OP_CFG */
+#define WM8903_GP1_IP_CFG                       0x0020  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_MASK                  0x0020  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_SHIFT                      5  /* GP1_IP_CFG */
+#define WM8903_GP1_IP_CFG_WIDTH                      1  /* GP1_IP_CFG */
+#define WM8903_GP1_LVL                          0x0010  /* GP1_LVL */
+#define WM8903_GP1_LVL_MASK                     0x0010  /* GP1_LVL */
+#define WM8903_GP1_LVL_SHIFT                         4  /* GP1_LVL */
+#define WM8903_GP1_LVL_WIDTH                         1  /* GP1_LVL */
+#define WM8903_GP1_PD                           0x0008  /* GP1_PD */
+#define WM8903_GP1_PD_MASK                      0x0008  /* GP1_PD */
+#define WM8903_GP1_PD_SHIFT                          3  /* GP1_PD */
+#define WM8903_GP1_PD_WIDTH                          1  /* GP1_PD */
+#define WM8903_GP1_PU                           0x0004  /* GP1_PU */
+#define WM8903_GP1_PU_MASK                      0x0004  /* GP1_PU */
+#define WM8903_GP1_PU_SHIFT                          2  /* GP1_PU */
+#define WM8903_GP1_PU_WIDTH                          1  /* GP1_PU */
+#define WM8903_GP1_INTMODE                      0x0002  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_MASK                 0x0002  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_SHIFT                     1  /* GP1_INTMODE */
+#define WM8903_GP1_INTMODE_WIDTH                     1  /* GP1_INTMODE */
+#define WM8903_GP1_DB                           0x0001  /* GP1_DB */
+#define WM8903_GP1_DB_MASK                      0x0001  /* GP1_DB */
+#define WM8903_GP1_DB_SHIFT                          0  /* GP1_DB */
+#define WM8903_GP1_DB_WIDTH                          1  /* GP1_DB */
+
+/*
+ * R117 (0x75) - GPIO Control 2
+ */
+#define WM8903_GP2_FN_MASK                      0x1F00  /* GP2_FN - [12:8] */
+#define WM8903_GP2_FN_SHIFT                          8  /* GP2_FN - [12:8] */
+#define WM8903_GP2_FN_WIDTH                          5  /* GP2_FN - [12:8] */
+#define WM8903_GP2_DIR                          0x0080  /* GP2_DIR */
+#define WM8903_GP2_DIR_MASK                     0x0080  /* GP2_DIR */
+#define WM8903_GP2_DIR_SHIFT                         7  /* GP2_DIR */
+#define WM8903_GP2_DIR_WIDTH                         1  /* GP2_DIR */
+#define WM8903_GP2_OP_CFG                       0x0040  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_MASK                  0x0040  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_SHIFT                      6  /* GP2_OP_CFG */
+#define WM8903_GP2_OP_CFG_WIDTH                      1  /* GP2_OP_CFG */
+#define WM8903_GP2_IP_CFG                       0x0020  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_MASK                  0x0020  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_SHIFT                      5  /* GP2_IP_CFG */
+#define WM8903_GP2_IP_CFG_WIDTH                      1  /* GP2_IP_CFG */
+#define WM8903_GP2_LVL                          0x0010  /* GP2_LVL */
+#define WM8903_GP2_LVL_MASK                     0x0010  /* GP2_LVL */
+#define WM8903_GP2_LVL_SHIFT                         4  /* GP2_LVL */
+#define WM8903_GP2_LVL_WIDTH                         1  /* GP2_LVL */
+#define WM8903_GP2_PD                           0x0008  /* GP2_PD */
+#define WM8903_GP2_PD_MASK                      0x0008  /* GP2_PD */
+#define WM8903_GP2_PD_SHIFT                          3  /* GP2_PD */
+#define WM8903_GP2_PD_WIDTH                          1  /* GP2_PD */
+#define WM8903_GP2_PU                           0x0004  /* GP2_PU */
+#define WM8903_GP2_PU_MASK                      0x0004  /* GP2_PU */
+#define WM8903_GP2_PU_SHIFT                          2  /* GP2_PU */
+#define WM8903_GP2_PU_WIDTH                          1  /* GP2_PU */
+#define WM8903_GP2_INTMODE                      0x0002  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_MASK                 0x0002  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_SHIFT                     1  /* GP2_INTMODE */
+#define WM8903_GP2_INTMODE_WIDTH                     1  /* GP2_INTMODE */
+#define WM8903_GP2_DB                           0x0001  /* GP2_DB */
+#define WM8903_GP2_DB_MASK                      0x0001  /* GP2_DB */
+#define WM8903_GP2_DB_SHIFT                          0  /* GP2_DB */
+#define WM8903_GP2_DB_WIDTH                          1  /* GP2_DB */
+
+/*
+ * R118 (0x76) - GPIO Control 3
+ */
+#define WM8903_GP3_FN_MASK                      0x1F00  /* GP3_FN - [12:8] */
+#define WM8903_GP3_FN_SHIFT                          8  /* GP3_FN - [12:8] */
+#define WM8903_GP3_FN_WIDTH                          5  /* GP3_FN - [12:8] */
+#define WM8903_GP3_DIR                          0x0080  /* GP3_DIR */
+#define WM8903_GP3_DIR_MASK                     0x0080  /* GP3_DIR */
+#define WM8903_GP3_DIR_SHIFT                         7  /* GP3_DIR */
+#define WM8903_GP3_DIR_WIDTH                         1  /* GP3_DIR */
+#define WM8903_GP3_OP_CFG                       0x0040  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_MASK                  0x0040  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_SHIFT                      6  /* GP3_OP_CFG */
+#define WM8903_GP3_OP_CFG_WIDTH                      1  /* GP3_OP_CFG */
+#define WM8903_GP3_IP_CFG                       0x0020  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_MASK                  0x0020  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_SHIFT                      5  /* GP3_IP_CFG */
+#define WM8903_GP3_IP_CFG_WIDTH                      1  /* GP3_IP_CFG */
+#define WM8903_GP3_LVL                          0x0010  /* GP3_LVL */
+#define WM8903_GP3_LVL_MASK                     0x0010  /* GP3_LVL */
+#define WM8903_GP3_LVL_SHIFT                         4  /* GP3_LVL */
+#define WM8903_GP3_LVL_WIDTH                         1  /* GP3_LVL */
+#define WM8903_GP3_PD                           0x0008  /* GP3_PD */
+#define WM8903_GP3_PD_MASK                      0x0008  /* GP3_PD */
+#define WM8903_GP3_PD_SHIFT                          3  /* GP3_PD */
+#define WM8903_GP3_PD_WIDTH                          1  /* GP3_PD */
+#define WM8903_GP3_PU                           0x0004  /* GP3_PU */
+#define WM8903_GP3_PU_MASK                      0x0004  /* GP3_PU */
+#define WM8903_GP3_PU_SHIFT                          2  /* GP3_PU */
+#define WM8903_GP3_PU_WIDTH                          1  /* GP3_PU */
+#define WM8903_GP3_INTMODE                      0x0002  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_MASK                 0x0002  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_SHIFT                     1  /* GP3_INTMODE */
+#define WM8903_GP3_INTMODE_WIDTH                     1  /* GP3_INTMODE */
+#define WM8903_GP3_DB                           0x0001  /* GP3_DB */
+#define WM8903_GP3_DB_MASK                      0x0001  /* GP3_DB */
+#define WM8903_GP3_DB_SHIFT                          0  /* GP3_DB */
+#define WM8903_GP3_DB_WIDTH                          1  /* GP3_DB */
+
+/*
+ * R119 (0x77) - GPIO Control 4
+ */
+#define WM8903_GP4_FN_MASK                      0x1F00  /* GP4_FN - [12:8] */
+#define WM8903_GP4_FN_SHIFT                          8  /* GP4_FN - [12:8] */
+#define WM8903_GP4_FN_WIDTH                          5  /* GP4_FN - [12:8] */
+#define WM8903_GP4_DIR                          0x0080  /* GP4_DIR */
+#define WM8903_GP4_DIR_MASK                     0x0080  /* GP4_DIR */
+#define WM8903_GP4_DIR_SHIFT                         7  /* GP4_DIR */
+#define WM8903_GP4_DIR_WIDTH                         1  /* GP4_DIR */
+#define WM8903_GP4_OP_CFG                       0x0040  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_MASK                  0x0040  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_SHIFT                      6  /* GP4_OP_CFG */
+#define WM8903_GP4_OP_CFG_WIDTH                      1  /* GP4_OP_CFG */
+#define WM8903_GP4_IP_CFG                       0x0020  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_MASK                  0x0020  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_SHIFT                      5  /* GP4_IP_CFG */
+#define WM8903_GP4_IP_CFG_WIDTH                      1  /* GP4_IP_CFG */
+#define WM8903_GP4_LVL                          0x0010  /* GP4_LVL */
+#define WM8903_GP4_LVL_MASK                     0x0010  /* GP4_LVL */
+#define WM8903_GP4_LVL_SHIFT                         4  /* GP4_LVL */
+#define WM8903_GP4_LVL_WIDTH                         1  /* GP4_LVL */
+#define WM8903_GP4_PD                           0x0008  /* GP4_PD */
+#define WM8903_GP4_PD_MASK                      0x0008  /* GP4_PD */
+#define WM8903_GP4_PD_SHIFT                          3  /* GP4_PD */
+#define WM8903_GP4_PD_WIDTH                          1  /* GP4_PD */
+#define WM8903_GP4_PU                           0x0004  /* GP4_PU */
+#define WM8903_GP4_PU_MASK                      0x0004  /* GP4_PU */
+#define WM8903_GP4_PU_SHIFT                          2  /* GP4_PU */
+#define WM8903_GP4_PU_WIDTH                          1  /* GP4_PU */
+#define WM8903_GP4_INTMODE                      0x0002  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_MASK                 0x0002  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_SHIFT                     1  /* GP4_INTMODE */
+#define WM8903_GP4_INTMODE_WIDTH                     1  /* GP4_INTMODE */
+#define WM8903_GP4_DB                           0x0001  /* GP4_DB */
+#define WM8903_GP4_DB_MASK                      0x0001  /* GP4_DB */
+#define WM8903_GP4_DB_SHIFT                          0  /* GP4_DB */
+#define WM8903_GP4_DB_WIDTH                          1  /* GP4_DB */
+
+/*
+ * R120 (0x78) - GPIO Control 5
+ */
+#define WM8903_GP5_FN_MASK                      0x1F00  /* GP5_FN - [12:8] */
+#define WM8903_GP5_FN_SHIFT                          8  /* GP5_FN - [12:8] */
+#define WM8903_GP5_FN_WIDTH                          5  /* GP5_FN - [12:8] */
+#define WM8903_GP5_DIR                          0x0080  /* GP5_DIR */
+#define WM8903_GP5_DIR_MASK                     0x0080  /* GP5_DIR */
+#define WM8903_GP5_DIR_SHIFT                         7  /* GP5_DIR */
+#define WM8903_GP5_DIR_WIDTH                         1  /* GP5_DIR */
+#define WM8903_GP5_OP_CFG                       0x0040  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_MASK                  0x0040  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_SHIFT                      6  /* GP5_OP_CFG */
+#define WM8903_GP5_OP_CFG_WIDTH                      1  /* GP5_OP_CFG */
+#define WM8903_GP5_IP_CFG                       0x0020  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_MASK                  0x0020  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_SHIFT                      5  /* GP5_IP_CFG */
+#define WM8903_GP5_IP_CFG_WIDTH                      1  /* GP5_IP_CFG */
+#define WM8903_GP5_LVL                          0x0010  /* GP5_LVL */
+#define WM8903_GP5_LVL_MASK                     0x0010  /* GP5_LVL */
+#define WM8903_GP5_LVL_SHIFT                         4  /* GP5_LVL */
+#define WM8903_GP5_LVL_WIDTH                         1  /* GP5_LVL */
+#define WM8903_GP5_PD                           0x0008  /* GP5_PD */
+#define WM8903_GP5_PD_MASK                      0x0008  /* GP5_PD */
+#define WM8903_GP5_PD_SHIFT                          3  /* GP5_PD */
+#define WM8903_GP5_PD_WIDTH                          1  /* GP5_PD */
+#define WM8903_GP5_PU                           0x0004  /* GP5_PU */
+#define WM8903_GP5_PU_MASK                      0x0004  /* GP5_PU */
+#define WM8903_GP5_PU_SHIFT                          2  /* GP5_PU */
+#define WM8903_GP5_PU_WIDTH                          1  /* GP5_PU */
+#define WM8903_GP5_INTMODE                      0x0002  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_MASK                 0x0002  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_SHIFT                     1  /* GP5_INTMODE */
+#define WM8903_GP5_INTMODE_WIDTH                     1  /* GP5_INTMODE */
+#define WM8903_GP5_DB                           0x0001  /* GP5_DB */
+#define WM8903_GP5_DB_MASK                      0x0001  /* GP5_DB */
+#define WM8903_GP5_DB_SHIFT                          0  /* GP5_DB */
+#define WM8903_GP5_DB_WIDTH                          1  /* GP5_DB */
+
+/*
+ * R121 (0x79) - Interrupt Status 1
+ */
+#define WM8903_MICSHRT_EINT                     0x8000  /* MICSHRT_EINT */
+#define WM8903_MICSHRT_EINT_MASK                0x8000  /* MICSHRT_EINT */
+#define WM8903_MICSHRT_EINT_SHIFT                   15  /* MICSHRT_EINT */
+#define WM8903_MICSHRT_EINT_WIDTH                    1  /* MICSHRT_EINT */
+#define WM8903_MICDET_EINT                      0x4000  /* MICDET_EINT */
+#define WM8903_MICDET_EINT_MASK                 0x4000  /* MICDET_EINT */
+#define WM8903_MICDET_EINT_SHIFT                    14  /* MICDET_EINT */
+#define WM8903_MICDET_EINT_WIDTH                     1  /* MICDET_EINT */
+#define WM8903_WSEQ_BUSY_EINT                   0x2000  /* WSEQ_BUSY_EINT */
+#define WM8903_WSEQ_BUSY_EINT_MASK              0x2000  /* WSEQ_BUSY_EINT */
+#define WM8903_WSEQ_BUSY_EINT_SHIFT                 13  /* WSEQ_BUSY_EINT */
+#define WM8903_WSEQ_BUSY_EINT_WIDTH                  1  /* WSEQ_BUSY_EINT */
+#define WM8903_GP5_EINT                         0x0010  /* GP5_EINT */
+#define WM8903_GP5_EINT_MASK                    0x0010  /* GP5_EINT */
+#define WM8903_GP5_EINT_SHIFT                        4  /* GP5_EINT */
+#define WM8903_GP5_EINT_WIDTH                        1  /* GP5_EINT */
+#define WM8903_GP4_EINT                         0x0008  /* GP4_EINT */
+#define WM8903_GP4_EINT_MASK                    0x0008  /* GP4_EINT */
+#define WM8903_GP4_EINT_SHIFT                        3  /* GP4_EINT */
+#define WM8903_GP4_EINT_WIDTH                        1  /* GP4_EINT */
+#define WM8903_GP3_EINT                         0x0004  /* GP3_EINT */
+#define WM8903_GP3_EINT_MASK                    0x0004  /* GP3_EINT */
+#define WM8903_GP3_EINT_SHIFT                        2  /* GP3_EINT */
+#define WM8903_GP3_EINT_WIDTH                        1  /* GP3_EINT */
+#define WM8903_GP2_EINT                         0x0002  /* GP2_EINT */
+#define WM8903_GP2_EINT_MASK                    0x0002  /* GP2_EINT */
+#define WM8903_GP2_EINT_SHIFT                        1  /* GP2_EINT */
+#define WM8903_GP2_EINT_WIDTH                        1  /* GP2_EINT */
+#define WM8903_GP1_EINT                         0x0001  /* GP1_EINT */
+#define WM8903_GP1_EINT_MASK                    0x0001  /* GP1_EINT */
+#define WM8903_GP1_EINT_SHIFT                        0  /* GP1_EINT */
+#define WM8903_GP1_EINT_WIDTH                        1  /* GP1_EINT */
+
+/*
+ * R122 (0x7A) - Interrupt Status 1 Mask
+ */
+#define WM8903_IM_MICSHRT_EINT                  0x8000  /* IM_MICSHRT_EINT */
+#define WM8903_IM_MICSHRT_EINT_MASK             0x8000  /* IM_MICSHRT_EINT */
+#define WM8903_IM_MICSHRT_EINT_SHIFT                15  /* IM_MICSHRT_EINT */
+#define WM8903_IM_MICSHRT_EINT_WIDTH                 1  /* IM_MICSHRT_EINT */
+#define WM8903_IM_MICDET_EINT                   0x4000  /* IM_MICDET_EINT */
+#define WM8903_IM_MICDET_EINT_MASK              0x4000  /* IM_MICDET_EINT */
+#define WM8903_IM_MICDET_EINT_SHIFT                 14  /* IM_MICDET_EINT */
+#define WM8903_IM_MICDET_EINT_WIDTH                  1  /* IM_MICDET_EINT */
+#define WM8903_IM_WSEQ_BUSY_EINT                0x2000  /* IM_WSEQ_BUSY_EINT */
+#define WM8903_IM_WSEQ_BUSY_EINT_MASK           0x2000  /* IM_WSEQ_BUSY_EINT */
+#define WM8903_IM_WSEQ_BUSY_EINT_SHIFT              13  /* IM_WSEQ_BUSY_EINT */
+#define WM8903_IM_WSEQ_BUSY_EINT_WIDTH               1  /* IM_WSEQ_BUSY_EINT */
+#define WM8903_IM_GP5_EINT                      0x0010  /* IM_GP5_EINT */
+#define WM8903_IM_GP5_EINT_MASK                 0x0010  /* IM_GP5_EINT */
+#define WM8903_IM_GP5_EINT_SHIFT                     4  /* IM_GP5_EINT */
+#define WM8903_IM_GP5_EINT_WIDTH                     1  /* IM_GP5_EINT */
+#define WM8903_IM_GP4_EINT                      0x0008  /* IM_GP4_EINT */
+#define WM8903_IM_GP4_EINT_MASK                 0x0008  /* IM_GP4_EINT */
+#define WM8903_IM_GP4_EINT_SHIFT                     3  /* IM_GP4_EINT */
+#define WM8903_IM_GP4_EINT_WIDTH                     1  /* IM_GP4_EINT */
+#define WM8903_IM_GP3_EINT                      0x0004  /* IM_GP3_EINT */
+#define WM8903_IM_GP3_EINT_MASK                 0x0004  /* IM_GP3_EINT */
+#define WM8903_IM_GP3_EINT_SHIFT                     2  /* IM_GP3_EINT */
+#define WM8903_IM_GP3_EINT_WIDTH                     1  /* IM_GP3_EINT */
+#define WM8903_IM_GP2_EINT                      0x0002  /* IM_GP2_EINT */
+#define WM8903_IM_GP2_EINT_MASK                 0x0002  /* IM_GP2_EINT */
+#define WM8903_IM_GP2_EINT_SHIFT                     1  /* IM_GP2_EINT */
+#define WM8903_IM_GP2_EINT_WIDTH                     1  /* IM_GP2_EINT */
+#define WM8903_IM_GP1_EINT                      0x0001  /* IM_GP1_EINT */
+#define WM8903_IM_GP1_EINT_MASK                 0x0001  /* IM_GP1_EINT */
+#define WM8903_IM_GP1_EINT_SHIFT                     0  /* IM_GP1_EINT */
+#define WM8903_IM_GP1_EINT_WIDTH                     1  /* IM_GP1_EINT */
+
+/*
+ * R123 (0x7B) - Interrupt Polarity 1
+ */
+#define WM8903_MICSHRT_INV                      0x8000  /* MICSHRT_INV */
+#define WM8903_MICSHRT_INV_MASK                 0x8000  /* MICSHRT_INV */
+#define WM8903_MICSHRT_INV_SHIFT                    15  /* MICSHRT_INV */
+#define WM8903_MICSHRT_INV_WIDTH                     1  /* MICSHRT_INV */
+#define WM8903_MICDET_INV                       0x4000  /* MICDET_INV */
+#define WM8903_MICDET_INV_MASK                  0x4000  /* MICDET_INV */
+#define WM8903_MICDET_INV_SHIFT                     14  /* MICDET_INV */
+#define WM8903_MICDET_INV_WIDTH                      1  /* MICDET_INV */
+
+/*
+ * R126 (0x7E) - Interrupt Control
+ */
+#define WM8903_IRQ_POL                          0x0001  /* IRQ_POL */
+#define WM8903_IRQ_POL_MASK                     0x0001  /* IRQ_POL */
+#define WM8903_IRQ_POL_SHIFT                         0  /* IRQ_POL */
+#define WM8903_IRQ_POL_WIDTH                         1  /* IRQ_POL */
+
+/*
+ * R129 (0x81) - Control Interface Test 1
+ */
+#define WM8903_USER_KEY                         0x0002  /* USER_KEY */
+#define WM8903_USER_KEY_MASK                    0x0002  /* USER_KEY */
+#define WM8903_USER_KEY_SHIFT                        1  /* USER_KEY */
+#define WM8903_USER_KEY_WIDTH                        1  /* USER_KEY */
+#define WM8903_TEST_KEY                         0x0001  /* TEST_KEY */
+#define WM8903_TEST_KEY_MASK                    0x0001  /* TEST_KEY */
+#define WM8903_TEST_KEY_SHIFT                        0  /* TEST_KEY */
+#define WM8903_TEST_KEY_WIDTH                        1  /* TEST_KEY */
+
+/*
+ * R149 (0x95) - Charge Pump Test 1
+ */
+#define WM8903_CP_SW_KELVIN_MODE_MASK           0x0006  /* CP_SW_KELVIN_MODE - [2:1] */
+#define WM8903_CP_SW_KELVIN_MODE_SHIFT               1  /* CP_SW_KELVIN_MODE - [2:1] */
+#define WM8903_CP_SW_KELVIN_MODE_WIDTH               2  /* CP_SW_KELVIN_MODE - [2:1] */
+
+/*
+ * R164 (0xA4) - Clock Rate Test 4
+ */
+#define WM8903_ADC_DIG_MIC                      0x0200  /* ADC_DIG_MIC */
+#define WM8903_ADC_DIG_MIC_MASK                 0x0200  /* ADC_DIG_MIC */
+#define WM8903_ADC_DIG_MIC_SHIFT                     9  /* ADC_DIG_MIC */
+#define WM8903_ADC_DIG_MIC_WIDTH                     1  /* ADC_DIG_MIC */
+
+/*
+ * R172 (0xAC) - Analogue Output Bias 0
+ */
+#define WM8903_PGA_BIAS_MASK                    0x0070  /* PGA_BIAS - [6:4] */
+#define WM8903_PGA_BIAS_SHIFT                        4  /* PGA_BIAS - [6:4] */
+#define WM8903_PGA_BIAS_WIDTH                        3  /* PGA_BIAS - [6:4] */
+
+#endif
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
new file mode 100644
index 0000000..974a4cd
--- /dev/null
+++ b/sound/soc/codecs/wm8971.c
@@ -0,0 +1,942 @@
+/*
+ * wm8971.c  --  WM8971 ALSA SoC Audio driver
+ *
+ * Copyright 2005 Lab126, Inc.
+ *
+ * Author: Kenneth Kiraly <kiraly@lab126.com>
+ *
+ * Based on wm8753.c by Liam Girdwood
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include "wm8971.h"
+
+#define AUDIO_NAME "wm8971"
+#define WM8971_VERSION "0.9"
+
+#define	WM8971_REG_COUNT		43
+
+static struct workqueue_struct *wm8971_workq = NULL;
+
+/* codec private data */
+struct wm8971_priv {
+	unsigned int sysclk;
+};
+
+/*
+ * wm8971 register cache
+ * We can't read the WM8971 register space when we
+ * are using 2 wire for device control, so we cache them instead.
+ */
+static const u16 wm8971_reg[] = {
+	0x0097, 0x0097, 0x0079, 0x0079,  /*  0 */
+	0x0000, 0x0008, 0x0000, 0x000a,  /*  4 */
+	0x0000, 0x0000, 0x00ff, 0x00ff,  /*  8 */
+	0x000f, 0x000f, 0x0000, 0x0000,  /* 12 */
+	0x0000, 0x007b, 0x0000, 0x0032,  /* 16 */
+	0x0000, 0x00c3, 0x00c3, 0x00c0,  /* 20 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 24 */
+	0x0000, 0x0000, 0x0000, 0x0000,  /* 28 */
+	0x0000, 0x0000, 0x0050, 0x0050,  /* 32 */
+	0x0050, 0x0050, 0x0050, 0x0050,  /* 36 */
+	0x0079, 0x0079, 0x0079,          /* 40 */
+};
+
+static inline unsigned int wm8971_read_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg < WM8971_REG_COUNT)
+		return cache[reg];
+
+	return -1;
+}
+
+static inline void wm8971_write_reg_cache(struct snd_soc_codec *codec,
+	unsigned int reg, unsigned int value)
+{
+	u16 *cache = codec->reg_cache;
+	if (reg < WM8971_REG_COUNT)
+		cache[reg] = value;
+}
+
+static int wm8971_write(struct snd_soc_codec *codec, unsigned int reg,
+	unsigned int value)
+{
+	u8 data[2];
+
+	/* data is
+	 *   D15..D9 WM8753 register offset
+	 *   D8...D0 register data
+	 */
+	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+	data[1] = value & 0x00ff;
+
+	wm8971_write_reg_cache (codec, reg, value);
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+#define wm8971_reset(c)	wm8971_write(c, WM8971_RESET, 0)
+
+/* WM8971 Controls */
+static const char *wm8971_bass[] = { "Linear Control", "Adaptive Boost" };
+static const char *wm8971_bass_filter[] = { "130Hz @ 48kHz",
+	"200Hz @ 48kHz" };
+static const char *wm8971_treble[] = { "8kHz", "4kHz" };
+static const char *wm8971_alc_func[] = { "Off", "Right", "Left", "Stereo" };
+static const char *wm8971_ng_type[] = { "Constant PGA Gain",
+	"Mute ADC Output" };
+static const char *wm8971_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
+static const char *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
+	"Mono (Right)", "Digital Mono"};
+static const char *wm8971_dac_phase[] = { "Non Inverted", "Inverted" };
+static const char *wm8971_lline_mux[] = {"Line", "NC", "NC", "PGA",
+	"Differential"};
+static const char *wm8971_rline_mux[] = {"Line", "Mic", "NC", "PGA",
+	"Differential"};
+static const char *wm8971_lpga_sel[] = {"Line", "NC", "NC", "Differential"};
+static const char *wm8971_rpga_sel[] = {"Line", "Mic", "NC", "Differential"};
+static const char *wm8971_adcpol[] = {"Normal", "L Invert", "R Invert",
+	"L + R Invert"};
+
+static const struct soc_enum wm8971_enum[] = {
+	SOC_ENUM_SINGLE(WM8971_BASS, 7, 2, wm8971_bass),	/* 0 */
+	SOC_ENUM_SINGLE(WM8971_BASS, 6, 2, wm8971_bass_filter),
+	SOC_ENUM_SINGLE(WM8971_TREBLE, 6, 2, wm8971_treble),
+	SOC_ENUM_SINGLE(WM8971_ALC1, 7, 4, wm8971_alc_func),
+	SOC_ENUM_SINGLE(WM8971_NGATE, 1, 2, wm8971_ng_type),    /* 4 */
+	SOC_ENUM_SINGLE(WM8971_ADCDAC, 1, 4, wm8971_deemp),
+	SOC_ENUM_SINGLE(WM8971_ADCTL1, 4, 4, wm8971_mono_mux),
+	SOC_ENUM_SINGLE(WM8971_ADCTL1, 1, 2, wm8971_dac_phase),
+	SOC_ENUM_SINGLE(WM8971_LOUTM1, 0, 5, wm8971_lline_mux), /* 8 */
+	SOC_ENUM_SINGLE(WM8971_ROUTM1, 0, 5, wm8971_rline_mux),
+	SOC_ENUM_SINGLE(WM8971_LADCIN, 6, 4, wm8971_lpga_sel),
+	SOC_ENUM_SINGLE(WM8971_RADCIN, 6, 4, wm8971_rpga_sel),
+	SOC_ENUM_SINGLE(WM8971_ADCDAC, 5, 4, wm8971_adcpol),    /* 12 */
+	SOC_ENUM_SINGLE(WM8971_ADCIN, 6, 4, wm8971_mono_mux),
+};
+
+static const struct snd_kcontrol_new wm8971_snd_controls[] = {
+	SOC_DOUBLE_R("Capture Volume", WM8971_LINVOL, WM8971_RINVOL, 0, 63, 0),
+	SOC_DOUBLE_R("Capture ZC Switch", WM8971_LINVOL, WM8971_RINVOL,
+		     6, 1, 0),
+	SOC_DOUBLE_R("Capture Switch", WM8971_LINVOL, WM8971_RINVOL, 7, 1, 1),
+
+	SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8971_LOUT1V,
+		WM8971_ROUT1V, 7, 1, 0),
+	SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8971_LOUT2V,
+		WM8971_ROUT2V, 7, 1, 0),
+	SOC_SINGLE("Mono Playback ZC Switch", WM8971_MOUTV, 7, 1, 0),
+
+	SOC_DOUBLE_R("PCM Volume", WM8971_LDAC, WM8971_RDAC, 0, 255, 0),
+
+	SOC_DOUBLE_R("Bypass Left Playback Volume", WM8971_LOUTM1,
+		WM8971_LOUTM2, 4, 7, 1),
+	SOC_DOUBLE_R("Bypass Right Playback Volume", WM8971_ROUTM1,
+		WM8971_ROUTM2, 4, 7, 1),
+	SOC_DOUBLE_R("Bypass Mono Playback Volume", WM8971_MOUTM1,
+		WM8971_MOUTM2, 4, 7, 1),
+
+	SOC_DOUBLE_R("Headphone Playback Volume", WM8971_LOUT1V,
+		WM8971_ROUT1V, 0, 127, 0),
+	SOC_DOUBLE_R("Speaker Playback Volume", WM8971_LOUT2V,
+		WM8971_ROUT2V, 0, 127, 0),
+
+	SOC_ENUM("Bass Boost", wm8971_enum[0]),
+	SOC_ENUM("Bass Filter", wm8971_enum[1]),
+	SOC_SINGLE("Bass Volume", WM8971_BASS, 0, 7, 1),
+
+	SOC_SINGLE("Treble Volume", WM8971_TREBLE, 0, 7, 0),
+	SOC_ENUM("Treble Cut-off", wm8971_enum[2]),
+
+	SOC_SINGLE("Capture Filter Switch", WM8971_ADCDAC, 0, 1, 1),
+
+	SOC_SINGLE("ALC Target Volume", WM8971_ALC1, 0, 7, 0),
+	SOC_SINGLE("ALC Max Volume", WM8971_ALC1, 4, 7, 0),
+
+	SOC_SINGLE("ALC Capture Target Volume", WM8971_ALC1, 0, 7, 0),
+	SOC_SINGLE("ALC Capture Max Volume", WM8971_ALC1, 4, 7, 0),
+	SOC_ENUM("ALC Capture Function", wm8971_enum[3]),
+	SOC_SINGLE("ALC Capture ZC Switch", WM8971_ALC2, 7, 1, 0),
+	SOC_SINGLE("ALC Capture Hold Time", WM8971_ALC2, 0, 15, 0),
+	SOC_SINGLE("ALC Capture Decay Time", WM8971_ALC3, 4, 15, 0),
+	SOC_SINGLE("ALC Capture Attack Time", WM8971_ALC3, 0, 15, 0),
+	SOC_SINGLE("ALC Capture NG Threshold", WM8971_NGATE, 3, 31, 0),
+	SOC_ENUM("ALC Capture NG Type", wm8971_enum[4]),
+	SOC_SINGLE("ALC Capture NG Switch", WM8971_NGATE, 0, 1, 0),
+
+	SOC_SINGLE("Capture 6dB Attenuate", WM8971_ADCDAC, 8, 1, 0),
+	SOC_SINGLE("Playback 6dB Attenuate", WM8971_ADCDAC, 7, 1, 0),
+
+	SOC_ENUM("Playback De-emphasis", wm8971_enum[5]),
+	SOC_ENUM("Playback Function", wm8971_enum[6]),
+	SOC_ENUM("Playback Phase", wm8971_enum[7]),
+
+	SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0),
+};
+
+/* add non-DAPM controls */
+static int wm8971_add_controls(struct snd_soc_codec *codec)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(wm8971_snd_controls); i++) {
+		err = snd_ctl_add(codec->card,
+				snd_soc_cnew(&wm8971_snd_controls[i],
+					     codec, NULL));
+		if (err < 0)
+			return err;
+	}
+	return 0;
+}
+
+/*
+ * DAPM Controls
+ */
+
+/* Left Mixer */
+static const struct snd_kcontrol_new wm8971_left_mixer_controls[] = {
+SOC_DAPM_SINGLE("Playback Switch", WM8971_LOUTM1, 8, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8971_LOUTM1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8971_LOUTM2, 8, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_LOUTM2, 7, 1, 0),
+};
+
+/* Right Mixer */
+static const struct snd_kcontrol_new wm8971_right_mixer_controls[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8971_ROUTM1, 8, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8971_ROUTM1, 7, 1, 0),
+SOC_DAPM_SINGLE("Playback Switch", WM8971_ROUTM2, 8, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_ROUTM2, 7, 1, 0),
+};
+
+/* Mono Mixer */
+static const struct snd_kcontrol_new wm8971_mono_mixer_controls[] = {
+SOC_DAPM_SINGLE("Left Playback Switch", WM8971_MOUTM1, 8, 1, 0),
+SOC_DAPM_SINGLE("Left Bypass Switch", WM8971_MOUTM1, 7, 1, 0),
+SOC_DAPM_SINGLE("Right Playback Switch", WM8971_MOUTM2, 8, 1, 0),
+SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_MOUTM2, 7, 1, 0),
+};
+
+/* Left Line Mux */
+static const struct snd_kcontrol_new wm8971_left_line_controls =
+SOC_DAPM_ENUM("Route", wm8971_enum[8]);
+
+/* Right Line Mux */
+static const struct snd_kcontrol_new wm8971_right_line_controls =
+SOC_DAPM_ENUM("Route", wm8971_enum[9]);
+
+/* Left PGA Mux */
+static const struct snd_kcontrol_new wm8971_left_pga_controls =
+SOC_DAPM_ENUM("Route", wm8971_enum[10]);
+
+/* Right PGA Mux */
+static const struct snd_kcontrol_new wm8971_right_pga_controls =
+SOC_DAPM_ENUM("Route", wm8971_enum[11]);
+
+/* Mono ADC Mux */
+static const struct snd_kcontrol_new wm8971_monomux_controls =
+SOC_DAPM_ENUM("Route", wm8971_enum[13]);
+
+static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
+	SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8971_left_mixer_controls[0],
+		ARRAY_SIZE(wm8971_left_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
+		&wm8971_right_mixer_controls[0],
+		ARRAY_SIZE(wm8971_right_mixer_controls)),
+	SND_SOC_DAPM_MIXER("Mono Mixer", WM8971_PWR2, 2, 0,
+		&wm8971_mono_mixer_controls[0],
+		ARRAY_SIZE(wm8971_mono_mixer_controls)),
+
+	SND_SOC_DAPM_PGA("Right Out 2", WM8971_PWR2, 3, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 2", WM8971_PWR2, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Right Out 1", WM8971_PWR2, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("Left Out 1", WM8971_PWR2, 6, 0, NULL, 0),
+	SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8971_PWR2, 7, 0),
+	SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8971_PWR2, 8, 0),
+	SND_SOC_DAPM_PGA("Mono Out 1", WM8971_PWR2, 2, 0, NULL, 0),
+
+	SND_SOC_DAPM_MICBIAS("Mic Bias", WM8971_PWR1, 1, 0),
+	SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8971_PWR1, 2, 0),
+	SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0),
+
+	SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
+		&wm8971_left_pga_controls),
+	SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
+		&wm8971_right_pga_controls),
+	SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8971_left_line_controls),
+	SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
+		&wm8971_right_line_controls),
+
+	SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8971_monomux_controls),
+	SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
+		&wm8971_monomux_controls),
+
+	SND_SOC_DAPM_OUTPUT("LOUT1"),
+	SND_SOC_DAPM_OUTPUT("ROUT1"),
+	SND_SOC_DAPM_OUTPUT("LOUT2"),
+	SND_SOC_DAPM_OUTPUT("ROUT2"),
+	SND_SOC_DAPM_OUTPUT("MONO"),
+
+	SND_SOC_DAPM_INPUT("LINPUT1"),
+	SND_SOC_DAPM_INPUT("RINPUT1"),
+	SND_SOC_DAPM_INPUT("MIC"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* left mixer */
+	{"Left Mixer", "Playback Switch", "Left DAC"},
+	{"Left Mixer", "Left Bypass Switch", "Left Line Mux"},
+	{"Left Mixer", "Right Playback Switch", "Right DAC"},
+	{"Left Mixer", "Right Bypass Switch", "Right Line Mux"},
+
+	/* right mixer */
+	{"Right Mixer", "Left Playback Switch", "Left DAC"},
+	{"Right Mixer", "Left Bypass Switch", "Left Line Mux"},
+	{"Right Mixer", "Playback Switch", "Right DAC"},
+	{"Right Mixer", "Right Bypass Switch", "Right Line Mux"},
+
+	/* left out 1 */
+	{"Left Out 1", NULL, "Left Mixer"},
+	{"LOUT1", NULL, "Left Out 1"},
+
+	/* left out 2 */
+	{"Left Out 2", NULL, "Left Mixer"},
+	{"LOUT2", NULL, "Left Out 2"},
+
+	/* right out 1 */
+	{"Right Out 1", NULL, "Right Mixer"},
+	{"ROUT1", NULL, "Right Out 1"},
+
+	/* right out 2 */
+	{"Right Out 2", NULL, "Right Mixer"},
+	{"ROUT2", NULL, "Right Out 2"},
+
+	/* mono mixer */
+	{"Mono Mixer", "Left Playback Switch", "Left DAC"},
+	{"Mono Mixer", "Left Bypass Switch", "Left Line Mux"},
+	{"Mono Mixer", "Right Playback Switch", "Right DAC"},
+	{"Mono Mixer", "Right Bypass Switch", "Right Line Mux"},
+
+	/* mono out */
+	{"Mono Out", NULL, "Mono Mixer"},
+	{"MONO1", NULL, "Mono Out"},
+
+	/* Left Line Mux */
+	{"Left Line Mux", "Line", "LINPUT1"},
+	{"Left Line Mux", "PGA", "Left PGA Mux"},
+	{"Left Line Mux", "Differential", "Differential Mux"},
+
+	/* Right Line Mux */
+	{"Right Line Mux", "Line", "RINPUT1"},
+	{"Right Line Mux", "Mic", "MIC"},
+	{"Right Line Mux", "PGA", "Right PGA Mux"},
+	{"Right Line Mux", "Differential", "Differential Mux"},
+
+	/* Left PGA Mux */
+	{"Left PGA Mux", "Line", "LINPUT1"},
+	{"Left PGA Mux", "Differential", "Differential Mux"},
+
+	/* Right PGA Mux */
+	{"Right PGA Mux", "Line", "RINPUT1"},
+	{"Right PGA Mux", "Differential", "Differential Mux"},
+
+	/* Differential Mux */
+	{"Differential Mux", "Line", "LINPUT1"},
+	{"Differential Mux", "Line", "RINPUT1"},
+
+	/* Left ADC Mux */
+	{"Left ADC Mux", "Stereo", "Left PGA Mux"},
+	{"Left ADC Mux", "Mono (Left)", "Left PGA Mux"},
+	{"Left ADC Mux", "Digital Mono", "Left PGA Mux"},
+
+	/* Right ADC Mux */
+	{"Right ADC Mux", "Stereo", "Right PGA Mux"},
+	{"Right ADC Mux", "Mono (Right)", "Right PGA Mux"},
+	{"Right ADC Mux", "Digital Mono", "Right PGA Mux"},
+
+	/* ADC */
+	{"Left ADC", NULL, "Left ADC Mux"},
+	{"Right ADC", NULL, "Right ADC Mux"},
+};
+
+static int wm8971_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8971_dapm_widgets,
+				  ARRAY_SIZE(wm8971_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	snd_soc_dapm_new_widgets(codec);
+
+	return 0;
+}
+
+struct _coeff_div {
+	u32 mclk;
+	u32 rate;
+	u16 fs;
+	u8 sr:5;
+	u8 usb:1;
+};
+
+/* codec hifi mclk clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+	/* 8k */
+	{12288000, 8000, 1536, 0x6, 0x0},
+	{11289600, 8000, 1408, 0x16, 0x0},
+	{18432000, 8000, 2304, 0x7, 0x0},
+	{16934400, 8000, 2112, 0x17, 0x0},
+	{12000000, 8000, 1500, 0x6, 0x1},
+
+	/* 11.025k */
+	{11289600, 11025, 1024, 0x18, 0x0},
+	{16934400, 11025, 1536, 0x19, 0x0},
+	{12000000, 11025, 1088, 0x19, 0x1},
+
+	/* 16k */
+	{12288000, 16000, 768, 0xa, 0x0},
+	{18432000, 16000, 1152, 0xb, 0x0},
+	{12000000, 16000, 750, 0xa, 0x1},
+
+	/* 22.05k */
+	{11289600, 22050, 512, 0x1a, 0x0},
+	{16934400, 22050, 768, 0x1b, 0x0},
+	{12000000, 22050, 544, 0x1b, 0x1},
+
+	/* 32k */
+	{12288000, 32000, 384, 0xc, 0x0},
+	{18432000, 32000, 576, 0xd, 0x0},
+	{12000000, 32000, 375, 0xa, 0x1},
+
+	/* 44.1k */
+	{11289600, 44100, 256, 0x10, 0x0},
+	{16934400, 44100, 384, 0x11, 0x0},
+	{12000000, 44100, 272, 0x11, 0x1},
+
+	/* 48k */
+	{12288000, 48000, 256, 0x0, 0x0},
+	{18432000, 48000, 384, 0x1, 0x0},
+	{12000000, 48000, 250, 0x0, 0x1},
+
+	/* 88.2k */
+	{11289600, 88200, 128, 0x1e, 0x0},
+	{16934400, 88200, 192, 0x1f, 0x0},
+	{12000000, 88200, 136, 0x1f, 0x1},
+
+	/* 96k */
+	{12288000, 96000, 128, 0xe, 0x0},
+	{18432000, 96000, 192, 0xf, 0x0},
+	{12000000, 96000, 125, 0xe, 0x1},
+};
+
+static int get_coeff(int mclk, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+		if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+			return i;
+	}
+	return -EINVAL;
+}
+
+static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8971_priv *wm8971 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 12000000:
+	case 12288000:
+	case 16934400:
+	case 18432000:
+		wm8971->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface = 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	wm8971_write(codec, WM8971_IFACE, iface);
+	return 0;
+}
+
+static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	struct wm8971_priv *wm8971 = codec->private_data;
+	u16 iface = wm8971_read_reg_cache(codec, WM8971_IFACE) & 0x1f3;
+	u16 srate = wm8971_read_reg_cache(codec, WM8971_SRATE) & 0x1c0;
+	int coeff = get_coeff(wm8971->sysclk, params_rate(params));
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		iface |= 0x000c;
+		break;
+	}
+
+	/* set iface & srate */
+	wm8971_write(codec, WM8971_IFACE, iface);
+	if (coeff >= 0)
+		wm8971_write(codec, WM8971_SRATE, srate |
+			(coeff_div[coeff].sr << 1) | coeff_div[coeff].usb);
+
+	return 0;
+}
+
+static int wm8971_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = wm8971_read_reg_cache(codec, WM8971_ADCDAC) & 0xfff7;
+
+	if (mute)
+		wm8971_write(codec, WM8971_ADCDAC, mute_reg | 0x8);
+	else
+		wm8971_write(codec, WM8971_ADCDAC, mute_reg);
+	return 0;
+}
+
+static int wm8971_set_bias_level(struct snd_soc_codec *codec,
+	enum snd_soc_bias_level level)
+{
+	u16 pwr_reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		/* set vmid to 50k and unmute dac */
+		wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		/* mute dac and set vmid to 500k, enable VREF */
+		wm8971_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
+		break;
+	case SND_SOC_BIAS_OFF:
+		wm8971_write(codec, WM8971_PWR1, 0x0001);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8971_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+		SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
+		SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define WM8971_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+struct snd_soc_dai wm8971_dai = {
+	.name = "WM8971",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8971_RATES,
+		.formats = WM8971_FORMATS,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8971_RATES,
+		.formats = WM8971_FORMATS,},
+	.ops = {
+		.hw_params = wm8971_pcm_hw_params,
+	},
+	.dai_ops = {
+		.digital_mute = wm8971_mute,
+		.set_fmt = wm8971_set_dai_fmt,
+		.set_sysclk = wm8971_set_dai_sysclk,
+	},
+};
+EXPORT_SYMBOL_GPL(wm8971_dai);
+
+static void wm8971_work(struct work_struct *work)
+{
+	struct snd_soc_codec *codec =
+		container_of(work, struct snd_soc_codec, delayed_work.work);
+	wm8971_set_bias_level(codec, codec->bias_level);
+}
+
+static int wm8971_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8971_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+	u16 reg;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < ARRAY_SIZE(wm8971_reg); i++) {
+		if (i + 1 == WM8971_RESET)
+			continue;
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+
+	wm8971_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* charge wm8971 caps */
+	if (codec->suspend_bias_level == SND_SOC_BIAS_ON) {
+		reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
+		wm8971_write(codec, WM8971_PWR1, reg | 0x01c0);
+		codec->bias_level = SND_SOC_BIAS_ON;
+		queue_delayed_work(wm8971_workq, &codec->delayed_work,
+			msecs_to_jiffies(1000));
+	}
+
+	return 0;
+}
+
+static int wm8971_init(struct snd_soc_device *socdev)
+{
+	struct snd_soc_codec *codec = socdev->codec;
+	int reg, ret = 0;
+
+	codec->name = "WM8971";
+	codec->owner = THIS_MODULE;
+	codec->read = wm8971_read_reg_cache;
+	codec->write = wm8971_write;
+	codec->set_bias_level = wm8971_set_bias_level;
+	codec->dai = &wm8971_dai;
+	codec->reg_cache_size = ARRAY_SIZE(wm8971_reg);
+	codec->num_dai = 1;
+	codec->reg_cache = kmemdup(wm8971_reg, sizeof(wm8971_reg), GFP_KERNEL);
+
+	if (codec->reg_cache == NULL)
+		return -ENOMEM;
+
+	wm8971_reset(codec);
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8971: failed to create pcms\n");
+		goto pcm_err;
+	}
+
+	/* charge output caps - set vmid to 5k for quick power up */
+	reg = wm8971_read_reg_cache(codec, WM8971_PWR1) & 0xfe3e;
+	wm8971_write(codec, WM8971_PWR1, reg | 0x01c0);
+	codec->bias_level = SND_SOC_BIAS_STANDBY;
+	queue_delayed_work(wm8971_workq, &codec->delayed_work,
+		msecs_to_jiffies(1000));
+
+	/* set the update bits */
+	reg = wm8971_read_reg_cache(codec, WM8971_LDAC);
+	wm8971_write(codec, WM8971_LDAC, reg | 0x0100);
+	reg = wm8971_read_reg_cache(codec, WM8971_RDAC);
+	wm8971_write(codec, WM8971_RDAC, reg | 0x0100);
+
+	reg = wm8971_read_reg_cache(codec, WM8971_LOUT1V);
+	wm8971_write(codec, WM8971_LOUT1V, reg | 0x0100);
+	reg = wm8971_read_reg_cache(codec, WM8971_ROUT1V);
+	wm8971_write(codec, WM8971_ROUT1V, reg | 0x0100);
+
+	reg = wm8971_read_reg_cache(codec, WM8971_LOUT2V);
+	wm8971_write(codec, WM8971_LOUT2V, reg | 0x0100);
+	reg = wm8971_read_reg_cache(codec, WM8971_ROUT2V);
+	wm8971_write(codec, WM8971_ROUT2V, reg | 0x0100);
+
+	reg = wm8971_read_reg_cache(codec, WM8971_LINVOL);
+	wm8971_write(codec, WM8971_LINVOL, reg | 0x0100);
+	reg = wm8971_read_reg_cache(codec, WM8971_RINVOL);
+	wm8971_write(codec, WM8971_RINVOL, reg | 0x0100);
+
+	wm8971_add_controls(codec);
+	wm8971_add_widgets(codec);
+	ret = snd_soc_register_card(socdev);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8971: failed to register card\n");
+		goto card_err;
+	}
+	return ret;
+
+card_err:
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+pcm_err:
+	kfree(codec->reg_cache);
+	return ret;
+}
+
+/* If the i2c layer weren't so broken, we could pass this kind of data
+   around */
+static struct snd_soc_device *wm8971_socdev;
+
+#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
+
+static int wm8971_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
+{
+	struct snd_soc_device *socdev = wm8971_socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	int ret;
+
+	i2c_set_clientdata(i2c, codec);
+
+	codec->control_data = i2c;
+
+	ret = wm8971_init(socdev);
+	if (ret < 0)
+		pr_err("failed to initialise WM8971\n");
+
+	return ret;
+}
+
+static int wm8971_i2c_remove(struct i2c_client *client)
+{
+	struct snd_soc_codec *codec = i2c_get_clientdata(client);
+	kfree(codec->reg_cache);
+	return 0;
+}
+
+static const struct i2c_device_id wm8971_i2c_id[] = {
+	{ "wm8971", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8971_i2c_id);
+
+static struct i2c_driver wm8971_i2c_driver = {
+	.driver = {
+		.name = "WM8971 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe    = wm8971_i2c_probe,
+	.remove   = wm8971_i2c_remove,
+	.id_table = wm8971_i2c_id,
+};
+
+static int wm8971_add_i2c_device(struct platform_device *pdev,
+				 const struct wm8971_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&wm8971_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "wm8971", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&wm8971_i2c_driver);
+	return -ENODEV;
+}
+
+#endif
+
+static int wm8971_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct wm8971_setup_data *setup;
+	struct snd_soc_codec *codec;
+	struct wm8971_priv *wm8971;
+	int ret = 0;
+
+	pr_info("WM8971 Audio Codec %s", WM8971_VERSION);
+
+	setup = socdev->codec_data;
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	wm8971 = kzalloc(sizeof(struct wm8971_priv), GFP_KERNEL);
+	if (wm8971 == NULL) {
+		kfree(codec);
+		return -ENOMEM;
+	}
+
+	codec->private_data = wm8971;
+	socdev->codec = codec;
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+	wm8971_socdev = socdev;
+
+	INIT_DELAYED_WORK(&codec->delayed_work, wm8971_work);
+	wm8971_workq = create_workqueue("wm8971");
+	if (wm8971_workq == NULL) {
+		kfree(codec->private_data);
+		kfree(codec);
+		return -ENOMEM;
+	}
+
+#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
+	if (setup->i2c_address) {
+		codec->hw_write = (hw_write_t)i2c_master_send;
+		ret = wm8971_add_i2c_device(pdev, setup);
+	}
+#endif
+	/* Add other interfaces here */
+
+	if (ret != 0) {
+		destroy_workqueue(wm8971_workq);
+		kfree(codec->private_data);
+		kfree(codec);
+	}
+
+	return ret;
+}
+
+/* power down chip */
+static int wm8971_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->codec;
+
+	if (codec->control_data)
+		wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	if (wm8971_workq)
+		destroy_workqueue(wm8971_workq);
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+#if defined (CONFIG_I2C) || defined (CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
+	i2c_del_driver(&wm8971_i2c_driver);
+#endif
+	kfree(codec->private_data);
+	kfree(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8971 = {
+	.probe = 	wm8971_probe,
+	.remove = 	wm8971_remove,
+	.suspend = 	wm8971_suspend,
+	.resume =	wm8971_resume,
+};
+
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8971);
+
+MODULE_DESCRIPTION("ASoC WM8971 driver");
+MODULE_AUTHOR("Lab126");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8971.h b/sound/soc/codecs/wm8971.h
new file mode 100644
index 0000000..ef4f08f
--- /dev/null
+++ b/sound/soc/codecs/wm8971.h
@@ -0,0 +1,64 @@
+/*
+ * wm8971.h  --  audio driver for WM8971
+ *
+ * Copyright 2005 Lab126, Inc.
+ *
+ * Author: Kenneth Kiraly <kiraly@lab126.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef _WM8971_H
+#define _WM8971_H
+
+#define WM8971_LINVOL	0x00
+#define WM8971_RINVOL	0x01
+#define WM8971_LOUT1V	0x02
+#define WM8971_ROUT1V	0x03
+#define WM8971_ADCDAC	0x05
+#define WM8971_IFACE	0x07
+#define WM8971_SRATE	0x08
+#define WM8971_LDAC		0x0a
+#define WM8971_RDAC		0x0b
+#define WM8971_BASS		0x0c
+#define WM8971_TREBLE	0x0d
+#define WM8971_RESET	0x0f
+#define WM8971_ALC1		0x11
+#define	WM8971_ALC2		0x12
+#define	WM8971_ALC3		0x13
+#define WM8971_NGATE	0x14
+#define WM8971_LADC		0x15
+#define WM8971_RADC		0x16
+#define	WM8971_ADCTL1	0x17
+#define	WM8971_ADCTL2	0x18
+#define WM8971_PWR1		0x19
+#define WM8971_PWR2		0x1a
+#define	WM8971_ADCTL3	0x1b
+#define WM8971_ADCIN	0x1f
+#define	WM8971_LADCIN	0x20
+#define	WM8971_RADCIN	0x21
+#define WM8971_LOUTM1	0x22
+#define WM8971_LOUTM2	0x23
+#define WM8971_ROUTM1	0x24
+#define WM8971_ROUTM2	0x25
+#define WM8971_MOUTM1	0x26
+#define WM8971_MOUTM2	0x27
+#define WM8971_LOUT2V	0x28
+#define WM8971_ROUT2V	0x29
+#define WM8971_MOUTV	0x2A
+
+#define WM8971_SYSCLK	0
+
+struct wm8971_setup_data {
+	int i2c_bus;
+	unsigned short i2c_address;
+};
+
+extern struct snd_soc_dai wm8971_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8971;
+
+#endif
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index dd995ef..63410d7 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -1477,81 +1477,86 @@ static struct snd_soc_device *wm8990_socdev;
  *    low  = 0x34
  *    high = 0x36
  */
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
 
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver wm8990_i2c_driver;
-static struct i2c_client client_template;
-
-static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int wm8990_i2c_probe(struct i2c_client *i2c,
+			    const struct i2c_device_id *id)
 {
 	struct snd_soc_device *socdev = wm8990_socdev;
-	struct wm8990_setup_data *setup = socdev->codec_data;
 	struct snd_soc_codec *codec = socdev->codec;
-	struct i2c_client *i2c;
 	int ret;
 
-	if (addr != setup->i2c_address)
-		return -ENODEV;
-
-	client_template.adapter = adap;
-	client_template.addr = addr;
-
-	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL)
-		return -ENOMEM;
-
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
-	ret = i2c_attach_client(i2c);
-	if (ret < 0) {
-		pr_err("failed to attach codec at addr %x\n", addr);
-		goto err;
-	}
-
 	ret = wm8990_init(socdev);
-	if (ret < 0) {
+	if (ret < 0)
 		pr_err("failed to initialise WM8990\n");
-		goto err;
-	}
-	return ret;
 
-err:
-	kfree(i2c);
 	return ret;
 }
 
-static int wm8990_i2c_detach(struct i2c_client *client)
+static int wm8990_i2c_remove(struct i2c_client *client)
 {
 	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	i2c_detach_client(client);
 	kfree(codec->reg_cache);
-	kfree(client);
 	return 0;
 }
 
-static int wm8990_i2c_attach(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, wm8990_codec_probe);
-}
+static const struct i2c_device_id wm8990_i2c_id[] = {
+	{ "wm8990", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8990_i2c_id);
 
 static struct i2c_driver wm8990_i2c_driver = {
 	.driver = {
 		.name = "WM8990 I2C Codec",
 		.owner = THIS_MODULE,
 	},
-	.attach_adapter = wm8990_i2c_attach,
-	.detach_client =  wm8990_i2c_detach,
-	.command =        NULL,
+	.probe =    wm8990_i2c_probe,
+	.remove =   wm8990_i2c_remove,
+	.id_table = wm8990_i2c_id,
 };
 
-static struct i2c_client client_template = {
-	.name =   "WM8990",
-	.driver = &wm8990_i2c_driver,
-};
+static int wm8990_add_i2c_device(struct platform_device *pdev,
+				 const struct wm8990_setup_data *setup)
+{
+	struct i2c_board_info info;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+	int ret;
+
+	ret = i2c_add_driver(&wm8990_i2c_driver);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "can't add i2c driver\n");
+		return ret;
+	}
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	info.addr = setup->i2c_address;
+	strlcpy(info.type, "wm8990", I2C_NAME_SIZE);
+
+	adapter = i2c_get_adapter(setup->i2c_bus);
+	if (!adapter) {
+		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+			setup->i2c_bus);
+		goto err_driver;
+	}
+
+	client = i2c_new_device(adapter, &info);
+	i2c_put_adapter(adapter);
+	if (!client) {
+		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+			(unsigned int)info.addr);
+		goto err_driver;
+	}
+
+	return 0;
+
+err_driver:
+	i2c_del_driver(&wm8990_i2c_driver);
+	return -ENODEV;
+}
 #endif
 
 static int wm8990_probe(struct platform_device *pdev)
@@ -1560,7 +1565,7 @@ static int wm8990_probe(struct platform_device *pdev)
 	struct wm8990_setup_data *setup;
 	struct snd_soc_codec *codec;
 	struct wm8990_priv *wm8990;
-	int ret = 0;
+	int ret;
 
 	pr_info("WM8990 Audio Codec %s\n", WM8990_VERSION);
 
@@ -1582,16 +1587,13 @@ static int wm8990_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&codec->dapm_paths);
 	wm8990_socdev = socdev;
 
+	ret = -ENODEV;
+
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	if (setup->i2c_address) {
-		normal_i2c[0] = setup->i2c_address;
 		codec->hw_write = (hw_write_t)i2c_master_send;
-		ret = i2c_add_driver(&wm8990_i2c_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add i2c driver");
+		ret = wm8990_add_i2c_device(pdev, setup);
 	}
-#else
-		/* Add other interfaces here */
 #endif
 
 	if (ret != 0) {
@@ -1612,6 +1614,7 @@ static int wm8990_remove(struct platform_device *pdev)
 	snd_soc_free_pcms(socdev);
 	snd_soc_dapm_free(socdev);
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_unregister_device(codec->control_data);
 	i2c_del_driver(&wm8990_i2c_driver);
 #endif
 	kfree(codec->private_data);
diff --git a/sound/soc/codecs/wm8990.h b/sound/soc/codecs/wm8990.h
index 0a08325..0e192f3 100644
--- a/sound/soc/codecs/wm8990.h
+++ b/sound/soc/codecs/wm8990.h
@@ -827,6 +827,7 @@
 #define WM8990_AINRMUX_PWR_BIT			3
 
 struct wm8990_setup_data {
+	unsigned i2c_bus;
 	unsigned short i2c_address;
 };
 
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index 38d1fe0..441d058 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -419,8 +419,12 @@ SND_SOC_DAPM_MIXER("Line Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_MIXER("Capture Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
 SND_SOC_DAPM_DAC("Voice DAC", "Voice Playback", AC97_EXTENDED_MID, 12, 1),
 SND_SOC_DAPM_DAC("Aux DAC", "Aux Playback", AC97_EXTENDED_MID, 11, 1),
-SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture", AC97_EXTENDED_MID, 5, 1),
-SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture", AC97_EXTENDED_MID, 4, 1),
+SND_SOC_DAPM_PGA("Left ADC", AC97_EXTENDED_MID, 5, 1, NULL, 0),
+SND_SOC_DAPM_PGA("Right ADC", AC97_EXTENDED_MID, 4, 1, NULL, 0),
+SND_SOC_DAPM_ADC("Left HiFi ADC", "Left HiFi Capture", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_ADC("Right HiFi ADC", "Right HiFi Capture", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_ADC("Left Voice ADC", "Left Voice Capture", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_ADC("Right Voice ADC", "Right Voice Capture", SND_SOC_NOPM, 0, 0),
 SND_SOC_DAPM_PGA("Left Headphone", AC97_EXTENDED_MSTATUS, 10, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Right Headphone", AC97_EXTENDED_MSTATUS, 9, 1, NULL, 0),
 SND_SOC_DAPM_PGA("Left Speaker", AC97_EXTENDED_MSTATUS, 8, 1, NULL, 0),
@@ -583,9 +587,13 @@ static const struct snd_soc_dapm_route audio_map[] = {
 
 	/* left ADC */
 	{"Left ADC", NULL, "Left Capture Source"},
+	{"Left Voice ADC", NULL, "Left ADC"},
+	{"Left HiFi ADC", NULL, "Left ADC"},
 
 	/* right ADC */
 	{"Right ADC", NULL, "Right Capture Source"},
+	{"Right Voice ADC", NULL, "Right ADC"},
+	{"Right HiFi ADC", NULL, "Right ADC"},
 
 	/* mic */
 	{"Mic A Pre Amp", NULL, "Mic A Source"},
@@ -949,17 +957,17 @@ static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream,
 
 static void wm9713_voiceshutdown(struct snd_pcm_substream *substream)
 {
-    struct snd_soc_pcm_runtime *rtd = substream->private_data;
-    struct snd_soc_device *socdev = rtd->socdev;
-    struct snd_soc_codec *codec = socdev->codec;
-    u16 status;
-
-    /* Gracefully shut down the voice interface. */
-    status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000;
-    ac97_write(codec, AC97_HANDSET_RATE, 0x0280);
-    schedule_timeout_interruptible(msecs_to_jiffies(1));
-    ac97_write(codec, AC97_HANDSET_RATE, 0x0F80);
-    ac97_write(codec, AC97_EXTENDED_MID, status);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->codec;
+	u16 status;
+
+	/* Gracefully shut down the voice interface. */
+	status = ac97_read(codec, AC97_EXTENDED_STATUS) | 0x1000;
+	ac97_write(codec, AC97_HANDSET_RATE, 0x0280);
+	schedule_timeout_interruptible(msecs_to_jiffies(1));
+	ac97_write(codec, AC97_HANDSET_RATE, 0x0F80);
+	ac97_write(codec, AC97_EXTENDED_MID, status);
 }
 
 static int ac97_hifi_prepare(struct snd_pcm_substream *substream)