diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-09-04 11:46:02 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-09-04 11:46:02 -0700 |
| commit | abebcdfb64f1b39eeeb14282d9cd4aad1ed86f8d (patch) | |
| tree | 2c5ac5569cf4d101dd12732ae2ea5cd368cd0a13 /sound/soc/codecs/wm8960.c | |
| parent | 670c039deeffb5c0a3a900de53b95dba781aaf89 (diff) | |
| parent | d5f362a7b977bdfaf8a955f3d604a29267bd5464 (diff) | |
| download | op-kernel-dev-abebcdfb64f1b39eeeb14282d9cd4aad1ed86f8d.zip op-kernel-dev-abebcdfb64f1b39eeeb14282d9cd4aad1ed86f8d.tar.gz | |
Merge tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are little changes in core part, but lots of development are
found in drivers, especially ASoC. The diffstat shows regmap-related
changes for a slight API additions / changes, and that's all.
Looking at the code size statistics, the most significant addition is
for Intel Skylake. (Note that SKL support is still underway, the
codec driver is missing.) Also STI controller driver is a major
addition as well as a few new codec drivers.
In HD-audio side, there are fewer changes than the past. The
noticeable change is the support of ELD notification from i915
graphics driver. Thus this pull request carries a few changes in
drm/i915.
Other than that, USB-audio got a rewrite of runtime PM code. It was
initiated by lockdep warning, but resulted in a good cleanup in the
end.
Below are the highlights:
Common:
- Factoring out of AC'97 reset code from ASoC into the core helper
- A few regmap API extensions (in case it's not pulled yet)
ASoC:
- New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
RT298 and ST STI controllers
- Machine drivers for Rockchip systems with MAX98090 and RT5645 and
RT5650
- Initial driver support for Intel Skylake devices
- Lots of rsnd cleanup and enhancements
- A few DAPM fixes and cleanups
- A large number of cleanups in various drivers (conversion and
standardized to regmap, component) mostly by Lars-Peter and Axel
HD-audio:
- Extended HD-audio core for Intel Skylake controller support
- Quirks for Dell headsets, Alienware 15
- Clean up of pin-based quirk tables for Realtek codecs
- ELD notifier implenetation for Intel HDMI/DP
USB-audio:
- Refactor runtime PM code to make lockdep happier"
* tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
drm/i915: Add locks around audio component bind/unbind
drm/i915: Drop port_mst_index parameter from pin/eld callback
ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()
ALSA: hda - Wake the codec up on pin/ELD notify events
ALSA: hda - allow codecs to access the i915 pin/ELD callback
drm/i915: Call audio pin/ELD notify function
drm/i915: Add audio pin sense / ELD callback
ASoC: zx296702-i2s: Fix resource leak when unload module
ASoC: sti_uniperif: Ensure component is unregistered when unload module
ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform
ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak
ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
ASoC: Clean up docbook warnings
ASoC: txx9: Convert to devm_snd_soc_register_platform
ASoC: pxa: Convert to devm_snd_soc_register_platform
ASoC: nuc900: Convert to devm_snd_soc_register_platform
ASoC: blackfin: Convert to devm_snd_soc_register_platform
ASoC: au1x: Convert to devm_snd_soc_register_platform
ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
...
Diffstat (limited to 'sound/soc/codecs/wm8960.c')
| -rw-r--r-- | sound/soc/codecs/wm8960.c | 221 |
1 files changed, 179 insertions, 42 deletions
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 94c5c46..e3b7d0c 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -48,6 +48,9 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30 +static bool is_pll_freq_available(unsigned int source, unsigned int target); +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out); /* * wm8960 register cache * We can't read the WM8960 register space when we are @@ -126,9 +129,12 @@ struct wm8960_priv { struct snd_soc_dapm_widget *rout1; struct snd_soc_dapm_widget *out3; bool deemph; - int playback_fs; + int lrclk; int bclk; int sysclk; + int clk_id; + int freq_in; + bool is_stream_in_use[2]; struct wm8960_data pdata; }; @@ -164,8 +170,8 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec) if (wm8960->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - wm8960->playback_fs) < - abs(deemph_settings[best] - wm8960->playback_fs)) + if (abs(deemph_settings[i] - wm8960->lrclk) < + abs(deemph_settings[best] - wm8960->lrclk)) best = i; } @@ -565,6 +571,9 @@ static struct { { 8000, 5 }, }; +/* -1 for reserved value */ +static const int sysclk_divs[] = { 1, -1, 2, -1 }; + /* Multiply 256 for internal 256 div */ static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 }; @@ -574,61 +583,110 @@ static const int bclk_divs[] = { 120, 160, 220, 240, 320, 320, 320 }; -static void wm8960_configure_clocking(struct snd_soc_codec *codec, - bool tx, int lrclk) +static int wm8960_configure_clocking(struct snd_soc_codec *codec) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int sysclk, bclk, lrclk, freq_out, freq_in; u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); - u16 iface2 = snd_soc_read(codec, WM8960_IFACE2); - u32 sysclk; - int i, j; + int i, j, k; if (!(iface1 & (1<<6))) { dev_dbg(codec->dev, "Codec is slave mode, no need to configure clock\n"); - return; + return 0; + } + + if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) { + dev_err(codec->dev, "No MCLK configured\n"); + return -EINVAL; } - if (!wm8960->sysclk) { - dev_dbg(codec->dev, "No SYSCLK configured\n"); - return; + freq_in = wm8960->freq_in; + bclk = wm8960->bclk; + lrclk = wm8960->lrclk; + /* + * If it's sysclk auto mode, check if the MCLK can provide sysclk or + * not. If MCLK can provide sysclk, using MCLK to provide sysclk + * directly. Otherwise, auto select a available pll out frequency + * and set PLL. + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) { + /* disable the PLL and using MCLK to provide sysclk */ + wm8960_set_pll(codec, 0, 0); + freq_out = freq_in; + } else if (wm8960->sysclk) { + freq_out = wm8960->sysclk; + } else { + dev_err(codec->dev, "No SYSCLK configured\n"); + return -EINVAL; } - if (!wm8960->bclk || !lrclk) { - dev_dbg(codec->dev, "No audio clocks configured\n"); - return; + /* check if the sysclk frequency is available. */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + sysclk = freq_out / sysclk_divs[i]; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + if (sysclk == dac_divs[j] * lrclk) { + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) + if (sysclk == bclk * bclk_divs[k] / 10) + break; + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + } + if (j != ARRAY_SIZE(dac_divs)) + break; } - for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) { - if (wm8960->sysclk == lrclk * dac_divs[i]) { - for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) { - sysclk = wm8960->bclk * bclk_divs[j] / 10; - if (wm8960->sysclk == sysclk) + if (i != ARRAY_SIZE(sysclk_divs)) { + goto configure_clock; + } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + /* get a available pll out frequency and set pll */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + sysclk = lrclk * dac_divs[j]; + freq_out = sysclk * sysclk_divs[i]; + + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) { + if (sysclk == bclk * bclk_divs[k] / 10 && + is_pll_freq_available(freq_in, freq_out)) { + wm8960_set_pll(codec, + freq_in, freq_out); break; + } else { + continue; + } } - if(j != ARRAY_SIZE(bclk_divs)) + if (k != ARRAY_SIZE(bclk_divs)) break; } + if (j != ARRAY_SIZE(dac_divs)) + break; } - if (i == ARRAY_SIZE(dac_divs)) { - dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk); - return; + if (i == ARRAY_SIZE(sysclk_divs)) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; } - /* - * configure frame clock. If ADCLRC configure as GPIO pin, DACLRC - * pin is used as a frame clock for ADCs and DACs. - */ - if (iface2 & (1<<6)) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (!tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, i << 6); +configure_clock: + /* configure sysclk clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1); + + /* configure frame clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6); /* configure bit clock */ - snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, j); + snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k); + + return 0; } static int wm8960_hw_params(struct snd_pcm_substream *substream, @@ -667,9 +725,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + wm8960->lrclk = params_rate(params); /* Update filters for the new rate */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - wm8960->playback_fs = params_rate(params); + if (tx) { wm8960_set_deemph(codec); } else { for (i = 0; i < ARRAY_SIZE(alc_rates); i++) @@ -682,7 +740,23 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface); - wm8960_configure_clocking(codec, tx, params_rate(params)); + wm8960->is_stream_in_use[tx] = true; + + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_ON && + !wm8960->is_stream_in_use[!tx]) + return wm8960_configure_clocking(codec); + + return 0; +} + +static int wm8960_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + + wm8960->is_stream_in_use[tx] = false; return 0; } @@ -702,6 +776,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int ret; switch (level) { @@ -721,11 +796,22 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, } } + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + /* Set VMID to 2x50k */ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); break; @@ -780,6 +866,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int reg, ret; switch (level) { @@ -831,9 +918,21 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, return ret; } } + + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); @@ -892,6 +991,28 @@ struct _pll_div { u32 k:24; }; +static bool is_pll_freq_available(unsigned int source, unsigned int target) +{ + unsigned int Ndiv; + + if (source == 0 || target == 0) + return false; + + /* Scale up target to PLL operating frequency */ + target *= 4; + Ndiv = target / source; + + if (Ndiv < 6) { + source >>= 1; + Ndiv = target / source; + } + + if ((Ndiv < 6) || (Ndiv > 12)) + return false; + + return true; +} + /* The size in bits of the pll divide multiplied by 10 * to allow rounding later */ #define FIXED_PLL_SIZE ((1 << 24) * 10) @@ -943,10 +1064,9 @@ static int pll_factors(unsigned int source, unsigned int target, return 0; } -static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out) { - struct snd_soc_codec *codec = codec_dai->codec; u16 reg; static struct _pll_div pll_div; int ret; @@ -986,6 +1106,20 @@ static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, return 0; } +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->freq_in = freq_in; + + if (pll_id == WM8960_SYSCLK_AUTO) + return 0; + + return wm8960_set_pll(codec, freq_in, freq_out); +} + static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -1043,11 +1177,14 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, WM8960_SYSCLK_PLL); break; + case WM8960_SYSCLK_AUTO: + break; default: return -EINVAL; } wm8960->sysclk = freq; + wm8960->clk_id = clk_id; return 0; } @@ -1060,6 +1197,7 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, static const struct snd_soc_dai_ops wm8960_dai_ops = { .hw_params = wm8960_hw_params, + .hw_free = wm8960_hw_free, .digital_mute = wm8960_mute, .set_fmt = wm8960_set_dai_fmt, .set_clkdiv = wm8960_set_dai_clkdiv, @@ -1216,7 +1354,6 @@ MODULE_DEVICE_TABLE(of, wm8960_of_match); static struct i2c_driver wm8960_i2c_driver = { .driver = { .name = "wm8960", - .owner = THIS_MODULE, .of_match_table = wm8960_of_match, }, .probe = wm8960_i2c_probe, |
