ASoC: multi-component - ASoC Multi-Component Support

This patch extends the ASoC API to allow sound cards to have more than one
CODEC and more than one platform DMA controller. This is achieved by dividing
some current ASoC structures that contain both driver data and device data into
structures that only either contain device data or driver data. i.e.

 struct snd_soc_codec    --->  struct snd_soc_codec (device data)
                          +->  struct snd_soc_codec_driver (driver data)

 struct snd_soc_platform --->  struct snd_soc_platform (device data)
                          +->  struct snd_soc_platform_driver (driver data)

 struct snd_soc_dai      --->  struct snd_soc_dai (device data)
                          +->  struct snd_soc_dai_driver (driver data)

 struct snd_soc_device   --->  deleted

This now allows ASoC to be more tightly aligned with the Linux driver model and
also means that every ASoC codec, platform and (platform) DAI is a kernel
device. ASoC component private data is now stored as device private data.

The ASoC sound card struct snd_soc_card has also been updated to store lists
of it's components rather than a pointer to a codec and platform. The PCM
runtime struct soc_pcm_runtime now has pointers to all its components.

This patch adds DAPM support for ASoC multi-component and removes struct
snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec
or runtime PCM level basis rather than using snd_soc_socdev.

Other notable multi-component changes:-

 * Stream operations now de-reference less structures.
 * close_delayed work() now runs on a DAI basis rather than looping all DAIs
   in a card.
 * PM suspend()/resume() operations can now handle N CODECs and Platforms
   per sound card.
 * Added soc_bind_dai_link() to bind the component devices to the sound card.
 * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove
   DAI link components.
 * sysfs entries can now be registered per component per card.
 * snd_soc_new_pcms() functionailty rolled into dai_link_probe().
 * snd_soc_register_codec() now does all the codec list and mutex init.

This patch changes the probe() and remove() of the CODEC drivers as follows:-

 o Make CODEC driver a platform driver
 o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.
 o Removed all static codec pointers (drivers now support > 1 codec dev)
 o snd_soc_register_pcms() now done by core.
 o snd_soc_register_dai() folded into snd_soc_register_codec().

CS4270 portions:
Acked-by: Timur Tabi <timur@freescale.com>

Some TLV320aic23 and Cirrus platform fixes.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>

TI CODEC and OMAP fixes
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>

Samsung platform and misc fixes :-
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>

MPC8610 and PPC fixes.
Signed-off-by: Timur Tabi <timur@freescale.com>

i.MX fixes and some core fixes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

J4740 platform fixes:-
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>

CC: Tony Lindgren <tony@atomide.com>
CC: Nicolas Ferre <nicolas.ferre@atmel.com>
CC: Kevin Hilman <khilman@deeprootsystems.com>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
CC: Kuninori Morimoto <morimoto.kuninori@renesas.com>
CC: Daniel Gloeckner <dg@emlix.com>
CC: Manuel Lauss <mano@roarinelk.homelinux.net>
CC: Mike Frysinger <vapier.adi@gmail.com>
CC: Arnaud Patard <apatard@mandriva.com>
CC: Wan ZongShun <mcuos.com@gmail.com>

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

1 files changed, 98 insertions, 192 deletions

diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 0f7bcb6..dbfa05d 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -31,8 +31,6 @@
 
 #define WM8510_VERSION "0.6"
 
-struct snd_soc_codec_device soc_codec_dev_wm8510;
-
 /*
  * wm8510 register cache
  * We can't read the WM8510 register space when we are
@@ -61,6 +59,12 @@ static const u16 wm8510_reg[WM8510_CACHEREGNUM] = {
 
 #define wm8510_reset(c)	snd_soc_write(c, WM8510_RESET, 0)
 
+/* codec private data */
+struct wm8510_priv {
+	enum snd_soc_control_type control_type;
+	void *control_data;
+};
+
 static const char *wm8510_companding[] = { "Off", "NC", "u-law", "A-law" };
 static const char *wm8510_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
 static const char *wm8510_alc[] = { "ALC", "Limiter" };
@@ -403,8 +407,7 @@ static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream,
 				struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_device *socdev = rtd->socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = rtd->codec;
 	u16 iface = snd_soc_read(codec, WM8510_IFACE) & 0x19f;
 	u16 adn = snd_soc_read(codec, WM8510_ADD) & 0x1f1;
 
@@ -514,8 +517,8 @@ static struct snd_soc_dai_ops wm8510_dai_ops = {
 	.set_pll	= wm8510_set_dai_pll,
 };
 
-struct snd_soc_dai wm8510_dai = {
-	.name = "WM8510 HiFi",
+static struct snd_soc_dai_driver wm8510_dai = {
+	.name = "wm8510-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 2,
@@ -531,21 +534,15 @@ struct snd_soc_dai wm8510_dai = {
 	.ops = &wm8510_dai_ops,
 	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8510_dai);
 
-static int wm8510_suspend(struct platform_device *pdev, pm_message_t state)
+static int wm8510_suspend(struct snd_soc_codec *codec, pm_message_t state)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
 	wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
 	return 0;
 }
 
-static int wm8510_resume(struct platform_device *pdev)
+static int wm8510_resume(struct snd_soc_codec *codec)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
 	int i;
 	u8 data[2];
 	u16 *cache = codec->reg_cache;
@@ -561,43 +558,22 @@ static int wm8510_resume(struct platform_device *pdev)
 	return 0;
 }
 
-/*
- * initialise the WM8510 driver
- * register the mixer and dsp interfaces with the kernel
- */
-static int wm8510_init(struct snd_soc_device *socdev,
-		       enum snd_soc_control_type control)
+static int wm8510_probe(struct snd_soc_codec *codec)
 {
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret = 0;
-
-	codec->name = "WM8510";
-	codec->owner = THIS_MODULE;
-	codec->set_bias_level = wm8510_set_bias_level;
-	codec->dai = &wm8510_dai;
-	codec->num_dai = 1;
-	codec->reg_cache_size = ARRAY_SIZE(wm8510_reg);
-	codec->reg_cache = kmemdup(wm8510_reg, sizeof(wm8510_reg), GFP_KERNEL);
+	struct wm8510_priv *wm8510 = snd_soc_codec_get_drvdata(codec);
+	int ret;
 
-	if (codec->reg_cache == NULL)
-		return -ENOMEM;
+	pr_info("WM8510 Audio Codec %s", WM8510_VERSION);
 
-	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+	codec->control_data = wm8510->control_data;
+	ret = snd_soc_codec_set_cache_io(codec, 7, 9,  wm8510->control_type);
 	if (ret < 0) {
-		printk(KERN_ERR "wm8510: failed to set cache I/O: %d\n",
-		       ret);
-		goto err;
+		printk(KERN_ERR "wm8510: failed to set cache I/O: %d\n", ret);
+		return ret;
 	}
 
 	wm8510_reset(codec);
 
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8510: failed to create pcms\n");
-		goto err;
-	}
-
 	/* power on device */
 	codec->bias_level = SND_SOC_BIAS_OFF;
 	wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -606,119 +582,53 @@ static int wm8510_init(struct snd_soc_device *socdev,
 	wm8510_add_widgets(codec);
 
 	return ret;
-
-err:
-	kfree(codec->reg_cache);
-	return ret;
 }
 
-static struct snd_soc_device *wm8510_socdev;
-
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-
-/*
- * WM8510 2 wire address is 0x1a
- */
-
-static int wm8510_i2c_probe(struct i2c_client *i2c,
-			    const struct i2c_device_id *id)
+/* power down chip */
+static int wm8510_remove(struct snd_soc_codec *codec)
 {
-	struct snd_soc_device *socdev = wm8510_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
-	int ret;
-
-	i2c_set_clientdata(i2c, codec);
-	codec->control_data = i2c;
-
-	ret = wm8510_init(socdev, SND_SOC_I2C);
-	if (ret < 0)
-		pr_err("failed to initialise WM8510\n");
-
-	return ret;
-}
+	struct wm8510_priv *wm8510 = snd_soc_codec_get_drvdata(codec);
 
-static int wm8510_i2c_remove(struct i2c_client *client)
-{
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	kfree(codec->reg_cache);
+	wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	kfree(wm8510);
 	return 0;
 }
 
-static const struct i2c_device_id wm8510_i2c_id[] = {
-	{ "wm8510", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id);
-
-static struct i2c_driver wm8510_i2c_driver = {
-	.driver = {
-		.name = "WM8510 I2C Codec",
-		.owner = THIS_MODULE,
-	},
-	.probe =    wm8510_i2c_probe,
-	.remove =   wm8510_i2c_remove,
-	.id_table = wm8510_i2c_id,
+static struct snd_soc_codec_driver soc_codec_dev_wm8510 = {
+	.probe =	wm8510_probe,
+	.remove =	wm8510_remove,
+	.suspend =	wm8510_suspend,
+	.resume =	wm8510_resume,
+	.set_bias_level = wm8510_set_bias_level,
+	.reg_cache_size = ARRAY_SIZE(wm8510_reg),
+	.reg_word_size = sizeof(u16),
+	.reg_cache_default =wm8510_reg,
 };
 
-static int wm8510_add_i2c_device(struct platform_device *pdev,
-				 const struct wm8510_setup_data *setup)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-	int ret;
-
-	ret = i2c_add_driver(&wm8510_i2c_driver);
-	if (ret != 0) {
-		dev_err(&pdev->dev, "can't add i2c driver\n");
-		return ret;
-	}
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = setup->i2c_address;
-	strlcpy(info.type, "wm8510", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(setup->i2c_bus);
-	if (!adapter) {
-		dev_err(&pdev->dev, "can't get i2c adapter %d\n",
-			setup->i2c_bus);
-		goto err_driver;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		goto err_driver;
-	}
-
-	return 0;
-
-err_driver:
-	i2c_del_driver(&wm8510_i2c_driver);
-	return -ENODEV;
-}
-#endif
-
 #if defined(CONFIG_SPI_MASTER)
 static int __devinit wm8510_spi_probe(struct spi_device *spi)
 {
-	struct snd_soc_device *socdev = wm8510_socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8510_priv *wm8510;
 	int ret;
 
-	codec->control_data = spi;
+	wm8510 = kzalloc(sizeof(struct wm8510_priv), GFP_KERNEL);
+	if (wm8510 == NULL)
+		return -ENOMEM;
+
+	wm8510->control_data = spi;
+	wm8510->control_type = SND_SOC_SPI;
+	spi_set_drvdata(spi, wm8510);
 
-	ret = wm8510_init(socdev, SND_SOC_SPI);
+	ret = snd_soc_register_codec(&spi->dev,
+			&soc_codec_dev_wm8510, &wm8510_dai, 1);
 	if (ret < 0)
-		dev_err(&spi->dev, "failed to initialise WM8510\n");
-
+		kfree(wm8510);
 	return ret;
 }
 
 static int __devexit wm8510_spi_remove(struct spi_device *spi)
 {
+	snd_soc_unregister_codec(&spi->dev);
 	return 0;
 }
 
@@ -733,84 +643,80 @@ static struct spi_driver wm8510_spi_driver = {
 };
 #endif /* CONFIG_SPI_MASTER */
 
-static int wm8510_probe(struct platform_device *pdev)
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8510_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct wm8510_setup_data *setup;
-	struct snd_soc_codec *codec;
-	int ret = 0;
-
-	pr_info("WM8510 Audio Codec %s", WM8510_VERSION);
+	struct wm8510_priv *wm8510;
+	int ret;
 
-	setup = socdev->codec_data;
-	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-	if (codec == NULL)
+	wm8510 = kzalloc(sizeof(struct wm8510_priv), GFP_KERNEL);
+	if (wm8510 == NULL)
 		return -ENOMEM;
 
-	socdev->card->codec = codec;
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
+	i2c_set_clientdata(i2c, wm8510);
+	wm8510->control_data = i2c;
+	wm8510->control_type = SND_SOC_I2C;
 
-	wm8510_socdev = socdev;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	if (setup->i2c_address) {
-		ret = wm8510_add_i2c_device(pdev, setup);
-	}
-#endif
-#if defined(CONFIG_SPI_MASTER)
-	if (setup->spi) {
-		ret = spi_register_driver(&wm8510_spi_driver);
-		if (ret != 0)
-			printk(KERN_ERR "can't add spi driver");
-	}
-#endif
-
-	if (ret != 0)
-		kfree(codec);
+	ret =  snd_soc_register_codec(&i2c->dev,
+			&soc_codec_dev_wm8510, &wm8510_dai, 1);
+	if (ret < 0)
+		kfree(wm8510);
 	return ret;
 }
 
-/* power down chip */
-static int wm8510_remove(struct platform_device *pdev)
+static __devexit int wm8510_i2c_remove(struct i2c_client *client)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
-	if (codec->control_data)
-		wm8510_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-	i2c_unregister_device(codec->control_data);
-	i2c_del_driver(&wm8510_i2c_driver);
-#endif
-#if defined(CONFIG_SPI_MASTER)
-	spi_unregister_driver(&wm8510_spi_driver);
-#endif
-	kfree(codec);
-
+	snd_soc_unregister_codec(&client->dev);
 	return 0;
 }
 
-struct snd_soc_codec_device soc_codec_dev_wm8510 = {
-	.probe = 	wm8510_probe,
-	.remove = 	wm8510_remove,
-	.suspend = 	wm8510_suspend,
-	.resume =	wm8510_resume,
+static const struct i2c_device_id wm8510_i2c_id[] = {
+	{ "wm8510", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8510_i2c_id);
+
+static struct i2c_driver wm8510_i2c_driver = {
+	.driver = {
+		.name = "wm8510-codec",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8510_i2c_probe,
+	.remove =   __devexit_p(wm8510_i2c_remove),
+	.id_table = wm8510_i2c_id,
 };
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8510);
+#endif
 
 static int __init wm8510_modinit(void)
 {
-	return snd_soc_register_dai(&wm8510_dai);
+	int ret = 0;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8510_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8510 I2C driver: %d\n",
+		       ret);
+	}
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	ret = spi_register_driver(&wm8510_spi_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8510 SPI driver: %d\n",
+		       ret);
+	}
+#endif
+	return ret;
 }
 module_init(wm8510_modinit);
 
 static void __exit wm8510_exit(void)
 {
-	snd_soc_unregister_dai(&wm8510_dai);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8510_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8510_spi_driver);
+#endif
 }
 module_exit(wm8510_exit);