[ALSA] ca0106: Add analog mute controls for cards with SPI DAC

Add four mute controls for the analog output channels for cards that use
an SPI DAC, like the SB0570 SB Live! 24-bit / Audigy SE.  The Wolfson DAC
doesn't support muting left/right so the controls are mono.
The chip state struct gets a 32-byte array to act as a shadow of the spi
dac registers.  Only two registers are used for mute, but more would be
needed for analog gain, de-emphasis, DAC power down, phase inversion, and
other features.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

1 files changed, 45 insertions, 2 deletions

diff --git a/sound/pci/ca0106/ca0106.h b/sound/pci/ca0106/ca0106.h
index a0420bc..7ad03c6 100644
--- a/sound/pci/ca0106/ca0106.h
+++ b/sound/pci/ca0106/ca0106.h
@@ -1,7 +1,7 @@
 /*
  *  Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
  *  Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
- *  Version: 0.0.21
+ *  Version: 0.0.22
  *
  *  FEATURES currently supported:
  *    See ca0106_main.c for features.
@@ -47,6 +47,8 @@
  *    Added GPIO info for SB Live 24bit.
  *  0.0.21
  *   Implement support for Line-in capture on SB Live 24bit.
+ *  0.0.22
+ *    Add support for mute control on SB Live 24bit (cards w/ SPI DAC)
  *
  *
  *  This code was initally based on code from ALSA's emu10k1x.c which is:
@@ -552,6 +554,44 @@
 #define CONTROL_CENTER_LFE_CHANNEL 1
 #define CONTROL_UNKNOWN_CHANNEL 2
 
+
+/* Based on WM8768 Datasheet Rev 4.2 page 32 */
+#define SPI_REG_MASK	0x1ff	/* 16-bit SPI writes have a 7-bit address */
+#define SPI_REG_SHIFT	9	/* followed by 9 bits of data */
+
+/* They really do label the bit for the 4th channel "4" and not "3" */
+#define SPI_DMUTE0_REG		9
+#define SPI_DMUTE1_REG		9
+#define SPI_DMUTE2_REG		9
+#define SPI_DMUTE4_REG		15
+#define SPI_DMUTE0_BIT		3
+#define SPI_DMUTE1_BIT		4
+#define SPI_DMUTE2_BIT		5
+#define SPI_DMUTE4_BIT		2
+
+#define SPI_PHASE0_REG		3
+#define SPI_PHASE1_REG		3
+#define SPI_PHASE2_REG		3
+#define SPI_PHASE4_REG		15
+#define SPI_PHASE0_BIT		6
+#define SPI_PHASE1_BIT		7
+#define SPI_PHASE2_BIT		8
+#define SPI_PHASE4_BIT		3
+
+#define SPI_PDWN_REG		2	/* power down all DACs */
+#define SPI_PDWN_BIT		2
+#define SPI_DACD0_REG		10	/* power down individual DACs */
+#define SPI_DACD1_REG		10
+#define SPI_DACD2_REG		10
+#define SPI_DACD4_REG		15
+#define SPI_DACD0_BIT		1
+#define SPI_DACD1_BIT		2
+#define SPI_DACD2_BIT		3
+#define SPI_DACD4_BIT		1
+
+#define SPI_PWRDNALL_REG	10	/* power down everything */
+#define SPI_PWRDNALL_BIT	4
+
 #include "ca_midi.h"
 
 struct snd_ca0106;
@@ -611,6 +651,8 @@ struct snd_ca0106 {
 
 	struct snd_ca_midi midi;
 	struct snd_ca_midi midi2;
+
+	u16 spi_dac_reg[16];
 };
 
 int snd_ca0106_mixer(struct snd_ca0106 *emu);
@@ -627,4 +669,5 @@ void snd_ca0106_ptr_write(struct snd_ca0106 *emu,
 
 int snd_ca0106_i2c_write(struct snd_ca0106 *emu, u32 reg, u32 value);
 
-
+int snd_ca0106_spi_write(struct snd_ca0106 * emu,
+				   unsigned int data);