summaryrefslogtreecommitdiffstats
path: root/sound/oss
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2011-05-20 09:34:24 +0100
committerTakashi Iwai <tiwai@suse.de>2011-05-20 11:33:39 +0200
commite28fb9c603f321e0bb4c6c43d58b31de052d6de6 (patch)
tree13383bd4cf0af0cdf3e454d39fa7aba5d666528f /sound/oss
parent693d92a1bbc9e42681c42ed190bd42b636ca876f (diff)
downloadop-kernel-dev-e28fb9c603f321e0bb4c6c43d58b31de052d6de6.zip
op-kernel-dev-e28fb9c603f321e0bb4c6c43d58b31de052d6de6.tar.gz
SOUND: OSS: Remove Au1550 driver.
This driver does no longer build since at least 2.6.30 and there is a modern ALSA replacement for it. RIP, Rot In Pieces. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/oss')
-rw-r--r--sound/oss/Kconfig4
-rw-r--r--sound/oss/Makefile1
-rw-r--r--sound/oss/ac97_codec.c1203
-rw-r--r--sound/oss/au1550_ac97.c2147
4 files changed, 0 insertions, 3355 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 76c0902..6c93e05 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -22,10 +22,6 @@ config SOUND_VWSND
<file:Documentation/sound/oss/vwsnd> for more info on this driver's
capabilities.
-config SOUND_AU1550_AC97
- tristate "Au1550/Au1200 AC97 Sound"
- depends on SOC_AU1550 || SOC_AU1200
-
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
depends on (m || !STANDALONE) && ISA
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index 90ffb99..77f21b6 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_SOUND_WAVEARTIST) += waveartist.o
obj-$(CONFIG_SOUND_MSNDCLAS) += msnd.o msnd_classic.o
obj-$(CONFIG_SOUND_MSNDPIN) += msnd.o msnd_pinnacle.o
obj-$(CONFIG_SOUND_VWSND) += vwsnd.o
-obj-$(CONFIG_SOUND_AU1550_AC97) += au1550_ac97.o ac97_codec.o
obj-$(CONFIG_SOUND_BCM_CS4297A) += swarm_cs4297a.o
obj-$(CONFIG_DMASOUND) += dmasound/
diff --git a/sound/oss/ac97_codec.c b/sound/oss/ac97_codec.c
deleted file mode 100644
index 0cd23d9..0000000
--- a/sound/oss/ac97_codec.c
+++ /dev/null
@@ -1,1203 +0,0 @@
-/*
- * ac97_codec.c: Generic AC97 mixer/modem module
- *
- * Derived from ac97 mixer in maestro and trident driver.
- *
- * Copyright 2000 Silicon Integrated System Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- **************************************************************************
- *
- * The Intel Audio Codec '97 specification is available at:
- * http://download.intel.com/support/motherboards/desktop/sb/ac97_r23.pdf
- *
- **************************************************************************
- *
- * History
- * May 02, 2003 Liam Girdwood <lrg@slimlogic.co.uk>
- * Removed non existent WM9700
- * Added support for WM9705, WM9708, WM9709, WM9710, WM9711
- * WM9712 and WM9717
- * Mar 28, 2002 Randolph Bentson <bentson@holmsjoen.com>
- * corrections to support WM9707 in ViewPad 1000
- * v0.4 Mar 15 2000 Ollie Lho
- * dual codecs support verified with 4 channels output
- * v0.3 Feb 22 2000 Ollie Lho
- * bug fix for record mask setting
- * v0.2 Feb 10 2000 Ollie Lho
- * add ac97_read_proc for /proc/driver/{vendor}/ac97
- * v0.1 Jan 14 2000 Ollie Lho <ollie@sis.com.tw>
- * Isolated from trident.c to support multiple ac97 codec
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/ac97_codec.h>
-#include <asm/uaccess.h>
-#include <linux/mutex.h>
-
-#define CODEC_ID_BUFSZ 14
-
-static int ac97_read_mixer(struct ac97_codec *codec, int oss_channel);
-static void ac97_write_mixer(struct ac97_codec *codec, int oss_channel,
- unsigned int left, unsigned int right);
-static void ac97_set_mixer(struct ac97_codec *codec, unsigned int oss_mixer, unsigned int val );
-static int ac97_recmask_io(struct ac97_codec *codec, int rw, int mask);
-static int ac97_mixer_ioctl(struct ac97_codec *codec, unsigned int cmd, unsigned long arg);
-
-static int ac97_init_mixer(struct ac97_codec *codec);
-
-static int wolfson_init03(struct ac97_codec * codec);
-static int wolfson_init04(struct ac97_codec * codec);
-static int wolfson_init05(struct ac97_codec * codec);
-static int wolfson_init11(struct ac97_codec * codec);
-static int wolfson_init13(struct ac97_codec * codec);
-static int tritech_init(struct ac97_codec * codec);
-static int tritech_maestro_init(struct ac97_codec * codec);
-static int sigmatel_9708_init(struct ac97_codec *codec);
-static int sigmatel_9721_init(struct ac97_codec *codec);
-static int sigmatel_9744_init(struct ac97_codec *codec);
-static int ad1886_init(struct ac97_codec *codec);
-static int eapd_control(struct ac97_codec *codec, int);
-static int crystal_digital_control(struct ac97_codec *codec, int slots, int rate, int mode);
-static int cmedia_init(struct ac97_codec * codec);
-static int cmedia_digital_control(struct ac97_codec *codec, int slots, int rate, int mode);
-static int generic_digital_control(struct ac97_codec *codec, int slots, int rate, int mode);
-
-
-/*
- * AC97 operations.
- *
- * If you are adding a codec then you should be able to use
- * eapd_ops - any codec that supports EAPD amp control (most)
- * null_ops - any ancient codec that supports nothing
- *
- * The three functions are
- * init - used for non AC97 standard initialisation
- * amplifier - used to do amplifier control (1=on 0=off)
- * digital - switch to digital modes (0 = analog)
- *
- * Not all codecs support all features, not all drivers use all the
- * operations yet
- */
-
-static struct ac97_ops null_ops = { NULL, NULL, NULL };
-static struct ac97_ops default_ops = { NULL, eapd_control, NULL };
-static struct ac97_ops default_digital_ops = { NULL, eapd_control, generic_digital_control};
-static struct ac97_ops wolfson_ops03 = { wolfson_init03, NULL, NULL };
-static struct ac97_ops wolfson_ops04 = { wolfson_init04, NULL, NULL };
-static struct ac97_ops wolfson_ops05 = { wolfson_init05, NULL, NULL };
-static struct ac97_ops wolfson_ops11 = { wolfson_init11, NULL, NULL };
-static struct ac97_ops wolfson_ops13 = { wolfson_init13, NULL, NULL };
-static struct ac97_ops tritech_ops = { tritech_init, NULL, NULL };
-static struct ac97_ops tritech_m_ops = { tritech_maestro_init, NULL, NULL };
-static struct ac97_ops sigmatel_9708_ops = { sigmatel_9708_init, NULL, NULL };
-static struct ac97_ops sigmatel_9721_ops = { sigmatel_9721_init, NULL, NULL };
-static struct ac97_ops sigmatel_9744_ops = { sigmatel_9744_init, NULL, NULL };
-static struct ac97_ops crystal_digital_ops = { NULL, eapd_control, crystal_digital_control };
-static struct ac97_ops ad1886_ops = { ad1886_init, eapd_control, NULL };
-static struct ac97_ops cmedia_ops = { NULL, eapd_control, NULL};
-static struct ac97_ops cmedia_digital_ops = { cmedia_init, eapd_control, cmedia_digital_control};
-
-/* sorted by vendor/device id */
-static const struct {
- u32 id;
- char *name;
- struct ac97_ops *ops;
- int flags;
-} ac97_codec_ids[] = {
- {0x41445303, "Analog Devices AD1819", &null_ops},
- {0x41445340, "Analog Devices AD1881", &null_ops},
- {0x41445348, "Analog Devices AD1881A", &null_ops},
- {0x41445360, "Analog Devices AD1885", &default_ops},
- {0x41445361, "Analog Devices AD1886", &ad1886_ops},
- {0x41445370, "Analog Devices AD1981", &null_ops},
- {0x41445372, "Analog Devices AD1981A", &null_ops},
- {0x41445374, "Analog Devices AD1981B", &null_ops},
- {0x41445460, "Analog Devices AD1885", &default_ops},
- {0x41445461, "Analog Devices AD1886", &ad1886_ops},
- {0x414B4D00, "Asahi Kasei AK4540", &null_ops},
- {0x414B4D01, "Asahi Kasei AK4542", &null_ops},
- {0x414B4D02, "Asahi Kasei AK4543", &null_ops},
- {0x414C4326, "ALC100P", &null_ops},
- {0x414C4710, "ALC200/200P", &null_ops},
- {0x414C4720, "ALC650", &default_digital_ops},
- {0x434D4941, "CMedia", &cmedia_ops, AC97_NO_PCM_VOLUME },
- {0x434D4942, "CMedia", &cmedia_ops, AC97_NO_PCM_VOLUME },
- {0x434D4961, "CMedia", &cmedia_digital_ops, AC97_NO_PCM_VOLUME },
- {0x43525900, "Cirrus Logic CS4297", &default_ops},
- {0x43525903, "Cirrus Logic CS4297", &default_ops},
- {0x43525913, "Cirrus Logic CS4297A rev A", &default_ops},
- {0x43525914, "Cirrus Logic CS4297A rev B", &default_ops},
- {0x43525923, "Cirrus Logic CS4298", &null_ops},
- {0x4352592B, "Cirrus Logic CS4294", &null_ops},
- {0x4352592D, "Cirrus Logic CS4294", &null_ops},
- {0x43525931, "Cirrus Logic CS4299 rev A", &crystal_digital_ops},
- {0x43525933, "Cirrus Logic CS4299 rev C", &crystal_digital_ops},
- {0x43525934, "Cirrus Logic CS4299 rev D", &crystal_digital_ops},
- {0x43585430, "CXT48", &default_ops, AC97_DELUDED_MODEM },
- {0x43585442, "CXT66", &default_ops, AC97_DELUDED_MODEM },
- {0x44543031, "Diamond Technology DT0893", &default_ops},
- {0x45838308, "ESS Allegro ES1988", &null_ops},
- {0x49434511, "ICE1232", &null_ops}, /* I hope --jk */
- {0x4e534331, "National Semiconductor LM4549", &null_ops},
- {0x53494c22, "Silicon Laboratory Si3036", &null_ops},
- {0x53494c23, "Silicon Laboratory Si3038", &null_ops},
- {0x545200FF, "TriTech TR?????", &tritech_m_ops},
- {0x54524102, "TriTech TR28022", &null_ops},
- {0x54524103, "TriTech TR28023", &null_ops},
- {0x54524106, "TriTech TR28026", &null_ops},
- {0x54524108, "TriTech TR28028", &tritech_ops},
- {0x54524123, "TriTech TR A5", &null_ops},
- {0x574D4C03, "Wolfson WM9703/07/08/17", &wolfson_ops03},
- {0x574D4C04, "Wolfson WM9704M/WM9704Q", &wolfson_ops04},
- {0x574D4C05, "Wolfson WM9705/WM9710", &wolfson_ops05},
- {0x574D4C09, "Wolfson WM9709", &null_ops},
- {0x574D4C12, "Wolfson WM9711/9712", &wolfson_ops11},
- {0x574D4C13, "Wolfson WM9713", &wolfson_ops13, AC97_DEFAULT_POWER_OFF},
- {0x83847600, "SigmaTel STAC????", &null_ops},
- {0x83847604, "SigmaTel STAC9701/3/4/5", &null_ops},
- {0x83847605, "SigmaTel STAC9704", &null_ops},
- {0x83847608, "SigmaTel STAC9708", &sigmatel_9708_ops},
- {0x83847609, "SigmaTel STAC9721/23", &sigmatel_9721_ops},
- {0x83847644, "SigmaTel STAC9744/45", &sigmatel_9744_ops},
- {0x83847652, "SigmaTel STAC9752/53", &default_ops},
- {0x83847656, "SigmaTel STAC9756/57", &sigmatel_9744_ops},
- {0x83847666, "SigmaTel STAC9750T", &sigmatel_9744_ops},
- {0x83847684, "SigmaTel STAC9783/84?", &null_ops},
- {0x57454301, "Winbond 83971D", &null_ops},
-};
-
-/* this table has default mixer values for all OSS mixers. */
-static struct mixer_defaults {
- int mixer;
- unsigned int value;
-} mixer_defaults[SOUND_MIXER_NRDEVICES] = {
- /* all values 0 -> 100 in bytes */
- {SOUND_MIXER_VOLUME, 0x4343},
- {SOUND_MIXER_BASS, 0x4343},
- {SOUND_MIXER_TREBLE, 0x4343},
- {SOUND_MIXER_PCM, 0x4343},
- {SOUND_MIXER_SPEAKER, 0x4343},
- {SOUND_MIXER_LINE, 0x4343},
- {SOUND_MIXER_MIC, 0x0000},
- {SOUND_MIXER_CD, 0x4343},
- {SOUND_MIXER_ALTPCM, 0x4343},
- {SOUND_MIXER_IGAIN, 0x4343},
- {SOUND_MIXER_LINE1, 0x4343},
- {SOUND_MIXER_PHONEIN, 0x4343},
- {SOUND_MIXER_PHONEOUT, 0x4343},
- {SOUND_MIXER_VIDEO, 0x4343},
- {-1,0}
-};
-
-/* table to scale scale from OSS mixer value to AC97 mixer register value */
-static struct ac97_mixer_hw {
- unsigned char offset;
- int scale;
-} ac97_hw[SOUND_MIXER_NRDEVICES]= {
- [SOUND_MIXER_VOLUME] = {AC97_MASTER_VOL_STEREO,64},
- [SOUND_MIXER_BASS] = {AC97_MASTER_TONE, 16},
- [SOUND_MIXER_TREBLE] = {AC97_MASTER_TONE, 16},
- [SOUND_MIXER_PCM] = {AC97_PCMOUT_VOL, 32},
- [SOUND_MIXER_SPEAKER] = {AC97_PCBEEP_VOL, 16},
- [SOUND_MIXER_LINE] = {AC97_LINEIN_VOL, 32},
- [SOUND_MIXER_MIC] = {AC97_MIC_VOL, 32},
- [SOUND_MIXER_CD] = {AC97_CD_VOL, 32},
- [SOUND_MIXER_ALTPCM] = {AC97_HEADPHONE_VOL, 64},
- [SOUND_MIXER_IGAIN] = {AC97_RECORD_GAIN, 16},
- [SOUND_MIXER_LINE1] = {AC97_AUX_VOL, 32},
- [SOUND_MIXER_PHONEIN] = {AC97_PHONE_VOL, 32},
- [SOUND_MIXER_PHONEOUT] = {AC97_MASTER_VOL_MONO, 64},
- [SOUND_MIXER_VIDEO] = {AC97_VIDEO_VOL, 32},
-};
-
-/* the following tables allow us to go from OSS <-> ac97 quickly. */
-enum ac97_recsettings {
- AC97_REC_MIC=0,
- AC97_REC_CD,
- AC97_REC_VIDEO,
- AC97_REC_AUX,
- AC97_REC_LINE,
- AC97_REC_STEREO, /* combination of all enabled outputs.. */
- AC97_REC_MONO, /*.. or the mono equivalent */
- AC97_REC_PHONE
-};
-
-static const unsigned int ac97_rm2oss[] = {
- [AC97_REC_MIC] = SOUND_MIXER_MIC,
- [AC97_REC_CD] = SOUND_MIXER_CD,
- [AC97_REC_VIDEO] = SOUND_MIXER_VIDEO,
- [AC97_REC_AUX] = SOUND_MIXER_LINE1,
- [AC97_REC_LINE] = SOUND_MIXER_LINE,
- [AC97_REC_STEREO]= SOUND_MIXER_IGAIN,
- [AC97_REC_PHONE] = SOUND_MIXER_PHONEIN
-};
-
-/* indexed by bit position */
-static const unsigned int ac97_oss_rm[] = {
- [SOUND_MIXER_MIC] = AC97_REC_MIC,
- [SOUND_MIXER_CD] = AC97_REC_CD,
- [SOUND_MIXER_VIDEO] = AC97_REC_VIDEO,
- [SOUND_MIXER_LINE1] = AC97_REC_AUX,
- [SOUND_MIXER_LINE] = AC97_REC_LINE,
- [SOUND_MIXER_IGAIN] = AC97_REC_STEREO,
- [SOUND_MIXER_PHONEIN] = AC97_REC_PHONE
-};
-
-static LIST_HEAD(codecs);
-static LIST_HEAD(codec_drivers);
-static DEFINE_MUTEX(codec_mutex);
-
-/* reads the given OSS mixer from the ac97 the caller must have insured that the ac97 knows
- about that given mixer, and should be holding a spinlock for the card */
-static int ac97_read_mixer(struct ac97_codec *codec, int oss_channel)
-{
- u16 val;
- int ret = 0;
- int scale;
- struct ac97_mixer_hw *mh = &ac97_hw[oss_channel];
-
- val = codec->codec_read(codec , mh->offset);
-
- if (val & AC97_MUTE) {
- ret = 0;
- } else if (AC97_STEREO_MASK & (1 << oss_channel)) {
- /* nice stereo mixers .. */
- int left,right;
-
- left = (val >> 8) & 0x7f;
- right = val & 0x7f;
-
- if (oss_channel == SOUND_MIXER_IGAIN) {
- right = (right * 100) / mh->scale;
- left = (left * 100) / mh->scale;
- } else {
- /* these may have 5 or 6 bit resolution */
- if(oss_channel == SOUND_MIXER_VOLUME || oss_channel == SOUND_MIXER_ALTPCM)
- scale = (1 << codec->bit_resolution);
- else
- scale = mh->scale;
-
- right = 100 - ((right * 100) / scale);
- left = 100 - ((left * 100) / scale);
- }
- ret = left | (right << 8);
- } else if (oss_channel == SOUND_MIXER_SPEAKER) {
- ret = 100 - ((((val & 0x1e)>>1) * 100) / mh->scale);
- } else if (oss_channel == SOUND_MIXER_PHONEIN) {
- ret = 100 - (((val & 0x1f) * 100) / mh->scale);
- } else if (oss_channel == SOUND_MIXER_PHONEOUT) {
- scale = (1 << codec->bit_resolution);
- ret = 100 - (((val & 0x1f) * 100) / scale);
- } else if (oss_channel == SOUND_MIXER_MIC) {
- ret = 100 - (((val & 0x1f) * 100) / mh->scale);
- /* the low bit is optional in the tone sliders and masking
- it lets us avoid the 0xf 'bypass'.. */
- } else if (oss_channel == SOUND_MIXER_BASS) {
- ret = 100 - ((((val >> 8) & 0xe) * 100) / mh->scale);
- } else if (oss_channel == SOUND_MIXER_TREBLE) {
- ret = 100 - (((val & 0xe) * 100) / mh->scale);
- }
-
-#ifdef DEBUG
- printk("ac97_codec: read OSS mixer %2d (%s ac97 register 0x%02x), "
- "0x%04x -> 0x%04x\n",
- oss_channel, codec->id ? "Secondary" : "Primary",
- mh->offset, val, ret);
-#endif
-
- return ret;
-}
-
-/* write the OSS encoded volume to the given OSS encoded mixer, again caller's job to
- make sure all is well in arg land, call with spinlock held */
-static void ac97_write_mixer(struct ac97_codec *codec, int oss_channel,
- unsigned int left, unsigned int right)
-{
- u16 val = 0;
- int scale;
- struct ac97_mixer_hw *mh = &ac97_hw[oss_channel];
-
-#ifdef DEBUG
- printk("ac97_codec: wrote OSS mixer %2d (%s ac97 register 0x%02x), "
- "left vol:%2d, right vol:%2d:",
- oss_channel, codec->id ? "Secondary" : "Primary",
- mh->offset, left, right);
-#endif
-
- if (AC97_STEREO_MASK & (1 << oss_channel)) {
- /* stereo mixers */
- if (left == 0 && right == 0) {
- val = AC97_MUTE;
- } else {
- if (oss_channel == SOUND_MIXER_IGAIN) {
- right = (right * mh->scale) / 100;
- left = (left * mh->scale) / 100;
- if (right >= mh->scale)
- right = mh->scale-1;
- if (left >= mh->scale)
- left = mh->scale-1;
- } else {
- /* these may have 5 or 6 bit resolution */
- if (oss_channel == SOUND_MIXER_VOLUME ||
- oss_channel == SOUND_MIXER_ALTPCM)
- scale = (1 << codec->bit_resolution);
- else
- scale = mh->scale;
-
- right = ((100 - right) * scale) / 100;
- left = ((100 - left) * scale) / 100;
- if (right >= scale)
- right = scale-1;
- if (left >= scale)
- left = scale-1;
- }
- val = (left << 8) | right;
- }
- } else if (oss_channel == SOUND_MIXER_BASS) {
- val = codec->codec_read(codec , mh->offset) & ~0x0f00;
- left = ((100 - left) * mh->scale) / 100;
- if (left >= mh->scale)
- left = mh->scale-1;
- val |= (left << 8) & 0x0e00;
- } else if (oss_channel == SOUND_MIXER_TREBLE) {
- val = codec->codec_read(codec , mh->offset) & ~0x000f;
- left = ((100 - left) * mh->scale) / 100;
- if (left >= mh->scale)
- left = mh->scale-1;
- val |= left & 0x000e;
- } else if(left == 0) {
- val = AC97_MUTE;
- } else if (oss_channel == SOUND_MIXER_SPEAKER) {
- left = ((100 - left) * mh->scale) / 100;
- if (left >= mh->scale)
- left = mh->scale-1;
- val = left << 1;
- } else if (oss_channel == SOUND_MIXER_PHONEIN) {
- left = ((100 - left) * mh->scale) / 100;
- if (left >= mh->scale)
- left = mh->scale-1;
- val = left;
- } else if (oss_channel == SOUND_MIXER_PHONEOUT) {
- scale = (1 << codec->bit_resolution);
- left = ((100 - left) * scale) / 100;
- if (left >= mh->scale)
- left = mh->scale-1;
- val = left;
- } else if (oss_channel == SOUND_MIXER_MIC) {
- val = codec->codec_read(codec , mh->offset) & ~0x801f;
- left = ((100 - left) * mh->scale) / 100;
- if (left >= mh->scale)
- left = mh->scale-1;
- val |= left;
- /* the low bit is optional in the tone sliders and masking
- it lets us avoid the 0xf 'bypass'.. */
- }
-#ifdef DEBUG
- printk(" 0x%04x", val);
-#endif
-
- codec->codec_write(codec, mh->offset, val);
-
-#ifdef DEBUG
- val = codec->codec_read(codec, mh->offset);
- printk(" -> 0x%04x\n", val);
-#endif
-}
-
-/* a thin wrapper for write_mixer */
-static void ac97_set_mixer(struct ac97_codec *codec, unsigned int oss_mixer, unsigned int val )
-{
- unsigned int left,right;
-
- /* cleanse input a little */
- right = ((val >> 8) & 0xff) ;
- left = (val & 0xff) ;
-
- if (right > 100) right = 100;
- if (left > 100) left = 100;
-
- codec->mixer_state[oss_mixer] = (right << 8) | left;
- codec->write_mixer(codec, oss_mixer, left, right);
-}
-
-/* read or write the recmask, the ac97 can really have left and right recording
- inputs independently set, but OSS doesn't seem to want us to express that to
- the user. the caller guarantees that we have a supported bit set, and they
- must be holding the card's spinlock */
-static int ac97_recmask_io(struct ac97_codec *codec, int rw, int mask)
-{
- unsigned int val;
-
- if (rw) {
- /* read it from the card */
- val = codec->codec_read(codec, AC97_RECORD_SELECT);
-#ifdef DEBUG
- printk("ac97_codec: ac97 recmask to set to 0x%04x\n", val);
-#endif
- return (1 << ac97_rm2oss[val & 0x07]);
- }
-
- /* else, write the first set in the mask as the
- output */
- /* clear out current set value first (AC97 supports only 1 input!) */
- val = (1 << ac97_rm2oss[codec->codec_read(codec, AC97_RECORD_SELECT) & 0x07]);
- if (mask != val)
- mask &= ~val;
-
- val = ffs(mask);
- val = ac97_oss_rm[val-1];
- val |= val << 8; /* set both channels */
-
-#ifdef DEBUG
- printk("ac97_codec: setting ac97 recmask to 0x%04x\n", val);
-#endif
-
- codec->codec_write(codec, AC97_RECORD_SELECT, val);
-
- return 0;
-};
-
-static int ac97_mixer_ioctl(struct ac97_codec *codec, unsigned int cmd, unsigned long arg)
-{
- int i, val = 0;
-
- if (cmd == SOUND_MIXER_INFO) {
- mixer_info info;
- memset(&info, 0, sizeof(info));
- strlcpy(info.id, codec->name, sizeof(info.id));
- strlcpy(info.name, codec->name, sizeof(info.name));
- info.modify_counter = codec->modcnt;
- if (copy_to_user((void __user *)arg, &info, sizeof(info)))
- return -EFAULT;
- return 0;
- }
- if (cmd == SOUND_OLD_MIXER_INFO) {
- _old_mixer_info info;
- memset(&info, 0, sizeof(info));
- strlcpy(info.id, codec->name, sizeof(info.id));
- strlcpy(info.name, codec->name, sizeof(info.name));
- if (copy_to_user((void __user *)arg, &info, sizeof(info)))
- return -EFAULT;
- return 0;
- }
-
- if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int))
- return -EINVAL;
-
- if (cmd == OSS_GETVERSION)
- return put_user(SOUND_VERSION, (int __user *)arg);
-
- if (_SIOC_DIR(cmd) == _SIOC_READ) {
- switch (_IOC_NR(cmd)) {
- case SOUND_MIXER_RECSRC: /* give them the current record source */
- if (!codec->recmask_io) {
- val = 0;
- } else {
- val = codec->recmask_io(codec, 1, 0);
- }
- break;
-
- case SOUND_MIXER_DEVMASK: /* give them the supported mixers */
- val = codec->supported_mixers;
- break;
-
- case SOUND_MIXER_RECMASK: /* Arg contains a bit for each supported recording source */
- val = codec->record_sources;
- break;
-
- case SOUND_MIXER_STEREODEVS: /* Mixer channels supporting stereo */
- val = codec->stereo_mixers;
- break;
-
- case SOUND_MIXER_CAPS:
- val = SOUND_CAP_EXCL_INPUT;
- break;
-
- default: /* read a specific mixer */
- i = _IOC_NR(cmd);
-
- if (!supported_mixer(codec, i))
- return -EINVAL;
-
- /* do we ever want to touch the hardware? */
- /* val = codec->read_mixer(codec, i); */
- val = codec->mixer_state[i];
- break;
- }
- return put_user(val, (int __user *)arg);
- }
-
- if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) {
- codec->modcnt++;
- if (get_user(val, (int __user *)arg))
- return -EFAULT;
-
- switch (_IOC_NR(cmd)) {
- case SOUND_MIXER_RECSRC: /* Arg contains a bit for each recording source */
- if (!codec->recmask_io) return -EINVAL;
- if (!val) return 0;
- if (!(val &= codec->record_sources)) return -EINVAL;
-
- codec->recmask_io(codec, 0, val);
-
- return 0;
- default: /* write a specific mixer */
- i = _IOC_NR(cmd);
-
- if (!supported_mixer(codec, i))
- return -EINVAL;
-
- ac97_set_mixer(codec, i, val);
-
- return 0;
- }
- }
- return -EINVAL;
-}
-
-/**
- * codec_id - Turn id1/id2 into a PnP string
- * @id1: Vendor ID1
- * @id2: Vendor ID2
- * @buf: CODEC_ID_BUFSZ byte buffer
- *
- * Fills buf with a zero terminated PnP ident string for the id1/id2
- * pair. For convenience the return is the passed in buffer pointer.
- */
-
-static char *codec_id(u16 id1, u16 id2, char *buf)
-{
- if(id1&0x8080) {
- snprintf(buf, CODEC_ID_BUFSZ, "0x%04x:0x%04x", id1, id2);
- } else {
- buf[0] = (id1 >> 8);
- buf[1] = (id1 & 0xFF);
- buf[2] = (id2 >> 8);
- snprintf(buf+3, CODEC_ID_BUFSZ - 3, "%d", id2&0xFF);
- }
- return buf;
-}
-
-/**
- * ac97_check_modem - Check if the Codec is a modem
- * @codec: codec to check
- *
- * Return true if the device is an AC97 1.0 or AC97 2.0 modem
- */
-
-static int ac97_check_modem(struct ac97_codec *codec)
-{
- /* Check for an AC97 1.0 soft modem (ID1) */
- if(codec->codec_read(codec, AC97_RESET) & 2)
- return 1;
- /* Check for an AC97 2.x soft modem */
- codec->codec_write(codec, AC97_EXTENDED_MODEM_ID, 0L);
- if(codec->codec_read(codec, AC97_EXTENDED_MODEM_ID) & 1)
- return 1;
- return 0;
-}
-
-
-/**
- * ac97_alloc_codec - Allocate an AC97 codec
- *
- * Returns a new AC97 codec structure. AC97 codecs may become
- * refcounted soon so this interface is needed. Returns with
- * one reference taken.
- */
-
-struct ac97_codec *ac97_alloc_codec(void)
-{
- struct ac97_codec *codec = kzalloc(sizeof(struct ac97_codec), GFP_KERNEL);
- if(!codec)
- return NULL;
-
- spin_lock_init(&codec->lock);
- INIT_LIST_HEAD(&codec->list);
- return codec;
-}
-
-EXPORT_SYMBOL(ac97_alloc_codec);
-
-/**
- * ac97_release_codec - Release an AC97 codec
- * @codec: codec to release
- *
- * Release an allocated AC97 codec. This will be refcounted in
- * time but for the moment is trivial. Calls the unregister
- * handler if the codec is now defunct.
- */
-
-void ac97_release_codec(struct ac97_codec *codec)
-{
- /* Remove from the list first, we don't want to be
- "rediscovered" */
- mutex_lock(&codec_mutex);
- list_del(&codec->list);
- mutex_unlock(&codec_mutex);
- /*
- * The driver needs to deal with internal
- * locking to avoid accidents here.
- */
- if(codec->driver)
- codec->driver->remove(codec, codec->driver);
- kfree(codec);
-}
-
-EXPORT_SYMBOL(ac97_release_codec);
-
-/**
- * ac97_probe_codec - Initialize and setup AC97-compatible codec
- * @codec: (in/out) Kernel info for a single AC97 codec
- *
- * Reset the AC97 codec, then initialize the mixer and
- * the rest of the @codec structure.
- *
- * The codec_read and codec_write fields of @codec are
- * required to be setup and working when this function
- * is called. All other fields are set by this function.
- *
- * codec_wait field of @codec can optionally be provided
- * when calling this function. If codec_wait is not %NULL,
- * this function will call codec_wait any time it is
- * necessary to wait for the audio chip to reach the
- * codec-ready state. If codec_wait is %NULL, then
- * the default behavior is to call schedule_timeout.
- * Currently codec_wait is used to wait for AC97 codec
- * reset to complete.
- *
- * Some codecs will power down when a register reset is
- * performed. We now check for such codecs.
- *
- * Returns 1 (true) on success, or 0 (false) on failure.
- */
-
-int ac97_probe_codec(struct ac97_codec *codec)
-{
- u16 id1, id2;
- u16 audio;
- int i;
- char cidbuf[CODEC_ID_BUFSZ];
- u16 f;
- struct list_head *l;
- struct ac97_driver *d;
-
- /* wait for codec-ready state */
- if (codec->codec_wait)
- codec->codec_wait(codec);
- else
- udelay(10);
-
- /* will the codec power down if register reset ? */
- id1 = codec->codec_read(codec, AC97_VENDOR_ID1);
- id2 = codec->codec_read(codec, AC97_VENDOR_ID2);
- codec->name = NULL;
- codec->codec_ops = &null_ops;
- for (i = 0; i < ARRAY_SIZE(ac97_codec_ids); i++) {
- if (ac97_codec_ids[i].id == ((id1 << 16) | id2)) {
- codec->type = ac97_codec_ids[i].id;
- codec->name = ac97_codec_ids[i].name;
- codec->codec_ops = ac97_codec_ids[i].ops;
- codec->flags = ac97_codec_ids[i].flags;
- break;
- }
- }
-
- codec->model = (id1 << 16) | id2;
- if ((codec->flags & AC97_DEFAULT_POWER_OFF) == 0) {
- /* reset codec and wait for the ready bit before we continue */
- codec->codec_write(codec, AC97_RESET, 0L);
- if (codec->codec_wait)
- codec->codec_wait(codec);
- else
- udelay(10);
- }
-
- /* probing AC97 codec, AC97 2.0 says that bit 15 of register 0x00 (reset) should
- * be read zero.
- *
- * FIXME: is the following comment outdated? -jgarzik
- * Probing of AC97 in this way is not reliable, it is not even SAFE !!
- */
- if ((audio = codec->codec_read(codec, AC97_RESET)) & 0x8000) {
- printk(KERN_ERR "ac97_codec: %s ac97 codec not present\n",
- (codec->id & 0x2) ? (codec->id&1 ? "4th" : "Tertiary")
- : (codec->id&1 ? "Secondary": "Primary"));
- return 0;
- }
-
- /* probe for Modem Codec */
- codec->modem = ac97_check_modem(codec);
-
- /* enable SPDIF */
- f = codec->codec_read(codec, AC97_EXTENDED_STATUS);
- if((codec->codec_ops == &null_ops) && (f & 4))
- codec->codec_ops = &default_digital_ops;
-
- /* A device which thinks its a modem but isn't */
- if(codec->flags & AC97_DELUDED_MODEM)
- codec->modem = 0;
-
- if (codec->name == NULL)
- codec->name = "Unknown";
- printk(KERN_INFO "ac97_codec: AC97 %s codec, id: %s (%s)\n",
- codec->modem ? "Modem" : (audio ? "Audio" : ""),
- codec_id(id1, id2, cidbuf), codec->name);
-
- if(!ac97_init_mixer(codec))
- return 0;
-
- /*
- * Attach last so the caller can override the mixer
- * callbacks.
- */
-
- mutex_lock(&codec_mutex);
- list_add(&codec->list, &codecs);
-
- list_for_each(l, &codec_drivers) {
- d = list_entry(l, struct ac97_driver, list);
- if ((codec->model ^ d->codec_id) & d->codec_mask)
- continue;
- if(d->probe(codec, d) == 0)
- {
- codec->driver = d;
- break;
- }
- }
-
- mutex_unlock(&codec_mutex);
- return 1;
-}
-
-static int ac97_init_mixer(struct ac97_codec *codec)
-{
- u16 cap;
- int i;
-
- cap = codec->codec_read(codec, AC97_RESET);
-
- /* mixer masks */
- codec->supported_mixers = AC97_SUPPORTED_MASK;
- codec->stereo_mixers = AC97_STEREO_MASK;
- codec->record_sources = AC97_RECORD_MASK;
- if (!(cap & 0x04))
- codec->supported_mixers &= ~(SOUND_MASK_BASS|SOUND_MASK_TREBLE);
- if (!(cap & 0x10))
- codec->supported_mixers &= ~SOUND_MASK_ALTPCM;
-
-
- /* detect bit resolution */
- codec->codec_write(codec, AC97_MASTER_VOL_STEREO, 0x2020);
- if(codec->codec_read(codec, AC97_MASTER_VOL_STEREO) == 0x2020)
- codec->bit_resolution = 6;
- else
- codec->bit_resolution = 5;
-
- /* generic OSS to AC97 wrapper */
- codec->read_mixer = ac97_read_mixer;
- codec->write_mixer = ac97_write_mixer;
- codec->recmask_io = ac97_recmask_io;
- codec->mixer_ioctl = ac97_mixer_ioctl;
-
- /* initialize mixer channel volumes */
- for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) {
- struct mixer_defaults *md = &mixer_defaults[i];
- if (md->mixer == -1)
- break;
- if (!supported_mixer(codec, md->mixer))
- continue;
- ac97_set_mixer(codec, md->mixer, md->value);
- }
-
- /* codec specific initialization for 4-6 channel output or secondary codec stuff */
- if (codec->codec_ops->init != NULL) {
- codec->codec_ops->init(codec);
- }
-
- /*
- * Volume is MUTE only on this device. We have to initialise
- * it but its useless beyond that.
- */
- if(codec->flags & AC97_NO_PCM_VOLUME)
- {
- codec->supported_mixers &= ~SOUND_MASK_PCM;
- printk(KERN_WARNING "AC97 codec does not have proper volume support.\n");
- }
- return 1;
-}
-
-#define AC97_SIGMATEL_ANALOG 0x6c /* Analog Special */
-#define AC97_SIGMATEL_DAC2INVERT 0x6e
-#define AC97_SIGMATEL_BIAS1 0x70
-#define AC97_SIGMATEL_BIAS2 0x72
-#define AC97_SIGMATEL_MULTICHN 0x74 /* Multi-Channel programming */
-#define AC97_SIGMATEL_CIC1 0x76
-#define AC97_SIGMATEL_CIC2 0x78
-
-
-static int sigmatel_9708_init(struct ac97_codec * codec)
-{
- u16 codec72, codec6c;
-
- codec72 = codec->codec_read(codec, AC97_SIGMATEL_BIAS2) & 0x8000;
- codec6c = codec->codec_read(codec, AC97_SIGMATEL_ANALOG);
-
- if ((codec72==0) && (codec6c==0)) {
- codec->codec_write(codec, AC97_SIGMATEL_CIC1, 0xabba);
- codec->codec_write(codec, AC97_SIGMATEL_CIC2, 0x1000);
- codec->codec_write(codec, AC97_SIGMATEL_BIAS1, 0xabba);
- codec->codec_write(codec, AC97_SIGMATEL_BIAS2, 0x0007);
- } else if ((codec72==0x8000) && (codec6c==0)) {
- codec->codec_write(codec, AC97_SIGMATEL_CIC1, 0xabba);
- codec->codec_write(codec, AC97_SIGMATEL_CIC2, 0x1001);
- codec->codec_write(codec, AC97_SIGMATEL_DAC2INVERT, 0x0008);
- } else if ((codec72==0x8000) && (codec6c==0x0080)) {
- /* nothing */
- }
- codec->codec_write(codec, AC97_SIGMATEL_MULTICHN, 0x0000);
- return 0;
-}
-
-
-static int sigmatel_9721_init(struct ac97_codec * codec)
-{
- /* Only set up secondary codec */
- if (codec->id == 0)
- return 0;
-
- codec->codec_write(codec, AC97_SURROUND_MASTER, 0L);
-
- /* initialize SigmaTel STAC9721/23 as secondary codec, decoding AC link
- sloc 3,4 = 0x01, slot 7,8 = 0x00, */
- codec->codec_write(codec, AC97_SIGMATEL_MULTICHN, 0x00);
-
- /* we don't have the crystal when we are on an AMR card, so use
- BIT_CLK as our clock source. Write the magic word ABBA and read
- back to enable register 0x78 */
- codec->codec_write(codec, AC97_SIGMATEL_CIC1, 0xabba);
- codec->codec_read(codec, AC97_SIGMATEL_CIC1);
-
- /* sync all the clocks*/
- codec->codec_write(codec, AC97_SIGMATEL_CIC2, 0x3802);
-
- return 0;
-}
-
-
-static int sigmatel_9744_init(struct ac97_codec * codec)
-{
- // patch for SigmaTel
- codec->codec_write(codec, AC97_SIGMATEL_CIC1, 0xabba);
- codec->codec_write(codec, AC97_SIGMATEL_CIC2, 0x0000); // is this correct? --jk
- codec->codec_write(codec, AC97_SIGMATEL_BIAS1, 0xabba);
- codec->codec_write(codec, AC97_SIGMATEL_BIAS2, 0x0002);
- codec->codec_write(codec, AC97_SIGMATEL_MULTICHN, 0x0000);
- return 0;
-}
-
-static int cmedia_init(struct ac97_codec *codec)
-{
- /* Initialise the CMedia 9739 */
- /*
- We could set various options here
- Register 0x20 bit 0x100 sets mic as center bass
- Also do multi_channel_ctrl &=~0x3000 |=0x1000
-
- For now we set up the GPIO and PC beep
- */
-
- u16 v;
-
- /* MIC */
- codec->codec_write(codec, 0x64, 0x3000);
- v = codec->codec_read(codec, 0x64);
- v &= ~0x8000;
- codec->codec_write(codec, 0x64, v);
- codec->codec_write(codec, 0x70, 0x0100);
- codec->codec_write(codec, 0x72, 0x0020);
- return 0;
-}
-
-#define AC97_WM97XX_FMIXER_VOL 0x72
-#define AC97_WM97XX_RMIXER_VOL 0x74
-#define AC97_WM97XX_TEST 0x5a
-#define AC97_WM9704_RPCM_VOL 0x70
-#define AC97_WM9711_OUT3VOL 0x16
-
-static int wolfson_init03(struct ac97_codec * codec)
-{
- /* this is known to work for the ViewSonic ViewPad 1000 */
- codec->codec_write(codec, AC97_WM97XX_FMIXER_VOL, 0x0808);
- codec->codec_write(codec, AC97_GENERAL_PURPOSE, 0x8000);
- return 0;
-}
-
-static int wolfson_init04(struct ac97_codec * codec)
-{
- codec->codec_write(codec, AC97_WM97XX_FMIXER_VOL, 0x0808);
- codec->codec_write(codec, AC97_WM97XX_RMIXER_VOL, 0x0808);
-
- // patch for DVD noise
- codec->codec_write(codec, AC97_WM97XX_TEST, 0x0200);
-
- // init vol as PCM vol
- codec->codec_write(codec, AC97_WM9704_RPCM_VOL,
- codec->codec_read(codec, AC97_PCMOUT_VOL));
-
- /* set rear surround volume */
- codec->codec_write(codec, AC97_SURROUND_MASTER, 0x0000);
- return 0;
-}
-
-/* WM9705, WM9710 */
-static int wolfson_init05(struct ac97_codec * codec)
-{
- /* set front mixer volume */
- codec->codec_write(codec, AC97_WM97XX_FMIXER_VOL, 0x0808);
- return 0;
-}
-
-/* WM9711, WM9712 */
-static int wolfson_init11(struct ac97_codec * codec)
-{
- /* stop pop's during suspend/resume */
- codec->codec_write(codec, AC97_WM97XX_TEST,
- codec->codec_read(codec, AC97_WM97XX_TEST) & 0xffbf);
-
- /* set out3 volume */
- codec->codec_write(codec, AC97_WM9711_OUT3VOL, 0x0808);
- return 0;
-}
-
-/* WM9713 */
-static int wolfson_init13(struct ac97_codec * codec)
-{
- codec->codec_write(codec, AC97_RECORD_GAIN, 0x00a0);
- codec->codec_write(codec, AC97_POWER_CONTROL, 0x0000);
- codec->codec_write(codec, AC97_EXTENDED_MODEM_ID, 0xDA00);
- codec->codec_write(codec, AC97_EXTEND_MODEM_STAT, 0x3810);
- codec->codec_write(codec, AC97_PHONE_VOL, 0x0808);
- codec->codec_write(codec, AC97_PCBEEP_VOL, 0x0808);
-
- return 0;
-}
-
-static int tritech_init(struct ac97_codec * codec)
-{
- codec->codec_write(codec, 0x26, 0x0300);
- codec->codec_write(codec, 0x26, 0x0000);
- codec->codec_write(codec, AC97_SURROUND_MASTER, 0x0000);
- codec->codec_write(codec, AC97_RESERVED_3A, 0x0000);
- return 0;
-}
-
-
-/* copied from drivers/sound/maestro.c */
-static int tritech_maestro_init(struct ac97_codec * codec)
-{
- /* no idea what this does */
- codec->codec_write(codec, 0x2A, 0x0001);
- codec->codec_write(codec, 0x2C, 0x0000);
- codec->codec_write(codec, 0x2C, 0XFFFF);
- return 0;
-}
-
-
-
-/*
- * Presario700 workaround
- * for Jack Sense/SPDIF Register mis-setting causing
- * no audible output
- * by Santiago Nullo 04/05/2002
- */
-
-#define AC97_AD1886_JACK_SENSE 0x72
-
-static int ad1886_init(struct ac97_codec * codec)
-{
- /* from AD1886 Specs */
- codec->codec_write(codec, AC97_AD1886_JACK_SENSE, 0x0010);
- return 0;
-}
-
-
-
-
-/*
- * This is basically standard AC97. It should work as a default for
- * almost all modern codecs. Note that some cards wire EAPD *backwards*
- * That side of it is up to the card driver not us to cope with.
- *
- */
-
-static int eapd_control(struct ac97_codec * codec, int on)
-{
- if(on)
- codec->codec_write(codec, AC97_POWER_CONTROL,
- codec->codec_read(codec, AC97_POWER_CONTROL)|0x8000);
- else
- codec->codec_write(codec, AC97_POWER_CONTROL,
- codec->codec_read(codec, AC97_POWER_CONTROL)&~0x8000);
- return 0;
-}
-
-static int generic_digital_control(struct ac97_codec *codec, int slots, int rate, int mode)
-{
- u16 reg;
-
- reg = codec->codec_read(codec, AC97_SPDIF_CONTROL);
-
- switch(rate)
- {
- /* Off by default */
- default:
- case 0:
- reg = codec->codec_read(codec, AC97_EXTENDED_STATUS);
- codec->codec_write(codec, AC97_EXTENDED_STATUS, (reg & ~AC97_EA_SPDIF));
- if(rate == 0)
- return 0;
- return -EINVAL;
- case 1:
- reg = (reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_48K;
- break;
- case 2:
- reg = (reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_44K;
- break;
- case 3:
- reg = (reg & AC97_SC_SPSR_MASK) | AC97_SC_SPSR_32K;
- break;
- }
-
- reg &= ~AC97_SC_CC_MASK;
- reg |= (mode & AUDIO_CCMASK) << 6;
-
- if(mode & AUDIO_DIGITAL)
- reg |= 2;
- if(mode & AUDIO_PRO)
- reg |= 1;
- if(mode & AUDIO_DRS)
- reg |= 0x4000;
-
- codec->codec_write(codec, AC97_SPDIF_CONTROL, reg);
-
- reg = codec->codec_read(codec, AC97_EXTENDED_STATUS);
- reg &= (AC97_EA_SLOT_MASK);
- reg |= AC97_EA_VRA | AC97_EA_SPDIF | slots;
- codec->codec_write(codec, AC97_EXTENDED_STATUS, reg);
-
- reg = codec->codec_read(codec, AC97_EXTENDED_STATUS);
- if(!(reg & 0x0400))
- {
- codec->codec_write(codec, AC97_EXTENDED_STATUS, reg & ~ AC97_EA_SPDIF);
- return -EINVAL;
- }
- return 0;
-}
-
-/*
- * Crystal digital audio control (CS4299)
- */
-
-static int crystal_digital_control(struct ac97_codec *codec, int slots, int rate, int mode)
-{
- u16 cv;
-
- if(mode & AUDIO_DIGITAL)
- return -EINVAL;
-
- switch(rate)
- {
- case 0: cv = 0x0; break; /* SPEN off */
- case 48000: cv = 0x8004; break; /* 48KHz digital */
- case 44100: cv = 0x8104; break; /* 44.1KHz digital */
- case 32768: /* 32Khz */
- default:
- return -EINVAL;
- }
- codec->codec_write(codec, 0x68, cv);
- return 0;
-}
-
-/*
- * CMedia digital audio control
- * Needs more work.
- */
-
-static int cmedia_digital_control(struct ac97_codec *codec, int slots, int rate, int mode)
-{
- u16 cv;
-
- if(mode & AUDIO_DIGITAL)
- return -EINVAL;
-
- switch(rate)
- {
- case 0: cv = 0x0001; break; /* SPEN off */
- case 48000: cv = 0x0009; break; /* 48KHz digital */
- default:
- return -EINVAL;
- }
- codec->codec_write(codec, 0x2A, 0x05c4);
- codec->codec_write(codec, 0x6C, cv);
-
- /* Switch on mix to surround */
- cv = codec->codec_read(codec, 0x64);
- cv &= ~0x0200;
- if(mode)
- cv |= 0x0200;
- codec->codec_write(codec, 0x64, cv);
- return 0;
-}
-
-
-/* copied from drivers/sound/maestro.c */
-#if 0 /* there has been 1 person on the planet with a pt101 that we
- know of. If they care, they can put this back in :) */
-static int pt101_init(struct ac97_codec * codec)
-{
- printk(KERN_INFO "ac97_codec: PT101 Codec detected, initializing but _not_ installing mixer device.\n");
- /* who knows.. */
- codec->codec_write(codec, 0x2A, 0x0001);
- codec->codec_write(codec, 0x2C, 0x0000);
- codec->codec_write(codec, 0x2C, 0xFFFF);
- codec->codec_write(codec, 0x10, 0x9F1F);
- codec->codec_write(codec, 0x12, 0x0808);
- codec->codec_write(codec, 0x14, 0x9F1F);
- codec->codec_write(codec, 0x16, 0x9F1F);
- codec->codec_write(codec, 0x18, 0x0404);
- codec->codec_write(codec, 0x1A, 0x0000);
- codec->codec_write(codec, 0x1C, 0x0000);
- codec->codec_write(codec, 0x02, 0x0404);
- codec->codec_write(codec, 0x04, 0x0808);
- codec->codec_write(codec, 0x0C, 0x801F);
- codec->codec_write(codec, 0x0E, 0x801F);
- return 0;
-}
-#endif
-
-
-EXPORT_SYMBOL(ac97_probe_codec);
-
-MODULE_LICENSE("GPL");
-
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
deleted file mode 100644
index a8f626d..0000000
--- a/sound/oss/au1550_ac97.c
+++ /dev/null
@@ -1,2147 +0,0 @@
-/*
- * au1550_ac97.c -- Sound driver for Alchemy Au1550 MIPS Internet Edge
- * Processor.
- *
- * Copyright 2004 Embedded Edge, LLC
- * dan@embeddededge.com
- *
- * Mostly copied from the au1000.c driver and some from the
- * PowerMac dbdma driver.
- * We assume the processor can do memory coherent DMA.
- *
- * Ported to 2.6 by Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-#include <linux/sound.h>
-#include <linux/slab.h>
-#include <linux/soundcard.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/poll.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/ac97_codec.h>
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/hardirq.h>
-#include <asm/mach-au1x00/au1xxx_psc.h>
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/mach-au1x00/au1xxx.h>
-
-#undef OSS_DOCUMENTED_MIXER_SEMANTICS
-
-/* misc stuff */
-#define POLL_COUNT 0x50000
-#define AC97_EXT_DACS (AC97_EXTID_SDAC | AC97_EXTID_CDAC | AC97_EXTID_LDAC)
-
-/* The number of DBDMA ring descriptors to allocate. No sense making
- * this too large....if you can't keep up with a few you aren't likely
- * to be able to with lots of them, either.
- */
-#define NUM_DBDMA_DESCRIPTORS 4
-
-#define err(format, arg...) printk(KERN_ERR format "\n" , ## arg)
-
-/* Boot options
- * 0 = no VRA, 1 = use VRA if codec supports it
- */
-static DEFINE_MUTEX(au1550_ac97_mutex);
-static int vra = 1;
-module_param(vra, bool, 0);
-MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it");
-
-static struct au1550_state {
- /* soundcore stuff */
- int dev_audio;
-
- struct ac97_codec *codec;
- unsigned codec_base_caps; /* AC'97 reg 00h, "Reset Register" */
- unsigned codec_ext_caps; /* AC'97 reg 28h, "Extended Audio ID" */
- int no_vra; /* do not use VRA */
-
- spinlock_t lock;
- struct mutex open_mutex;
- struct mutex sem;
- fmode_t open_mode;
- wait_queue_head_t open_wait;
-
- struct dmabuf {
- u32 dmanr;
- unsigned sample_rate;
- unsigned src_factor;
- unsigned sample_size;
- int num_channels;
- int dma_bytes_per_sample;
- int user_bytes_per_sample;
- int cnt_factor;
-
- void *rawbuf;
- unsigned buforder;
- unsigned numfrag;
- unsigned fragshift;
- void *nextIn;
- void *nextOut;
- int count;
- unsigned total_bytes;
- unsigned error;
- wait_queue_head_t wait;
-
- /* redundant, but makes calculations easier */
- unsigned fragsize;
- unsigned dma_fragsize;
- unsigned dmasize;
- unsigned dma_qcount;
-
- /* OSS stuff */
- unsigned mapped:1;
- unsigned ready:1;
- unsigned stopped:1;
- unsigned ossfragshift;
- int ossmaxfrags;
- unsigned subdivision;
- } dma_dac, dma_adc;
-} au1550_state;
-
-static unsigned
-ld2(unsigned int x)
-{
- unsigned r = 0;
-
- if (x >= 0x10000) {
- x >>= 16;
- r += 16;
- }
- if (x >= 0x100) {
- x >>= 8;
- r += 8;
- }
- if (x >= 0x10) {
- x >>= 4;
- r += 4;
- }
- if (x >= 4) {
- x >>= 2;
- r += 2;
- }
- if (x >= 2)
- r++;
- return r;
-}
-
-static void
-au1550_delay(int msec)
-{
- if (in_interrupt())
- return;
-
- schedule_timeout_uninterruptible(msecs_to_jiffies(msec));
-}
-
-static u16
-rdcodec(struct ac97_codec *codec, u8 addr)
-{
- struct au1550_state *s = codec->private_data;
- unsigned long flags;
- u32 cmd, val;
- u16 data;
- int i;
-
- spin_lock_irqsave(&s->lock, flags);
-
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- if (!(val & PSC_AC97STAT_CP))
- break;
- }
- if (i == POLL_COUNT)
- err("rdcodec: codec cmd pending expired!");
-
- cmd = (u32)PSC_AC97CDC_INDX(addr);
- cmd |= PSC_AC97CDC_RD; /* read command */
- au_writel(cmd, PSC_AC97CDC);
- au_sync();
-
- /* now wait for the data
- */
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- if (!(val & PSC_AC97STAT_CP))
- break;
- }
- if (i == POLL_COUNT) {
- err("rdcodec: read poll expired!");
- data = 0;
- goto out;
- }
-
- /* wait for command done?
- */
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97EVNT);
- au_sync();
- if (val & PSC_AC97EVNT_CD)
- break;
- }
- if (i == POLL_COUNT) {
- err("rdcodec: read cmdwait expired!");
- data = 0;
- goto out;
- }
-
- data = au_readl(PSC_AC97CDC) & 0xffff;
- au_sync();
-
- /* Clear command done event.
- */
- au_writel(PSC_AC97EVNT_CD, PSC_AC97EVNT);
- au_sync();
-
- out:
- spin_unlock_irqrestore(&s->lock, flags);
-
- return data;
-}
-
-
-static void
-wrcodec(struct ac97_codec *codec, u8 addr, u16 data)
-{
- struct au1550_state *s = codec->private_data;
- unsigned long flags;
- u32 cmd, val;
- int i;
-
- spin_lock_irqsave(&s->lock, flags);
-
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- if (!(val & PSC_AC97STAT_CP))
- break;
- }
- if (i == POLL_COUNT)
- err("wrcodec: codec cmd pending expired!");
-
- cmd = (u32)PSC_AC97CDC_INDX(addr);
- cmd |= (u32)data;
- au_writel(cmd, PSC_AC97CDC);
- au_sync();
-
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- if (!(val & PSC_AC97STAT_CP))
- break;
- }
- if (i == POLL_COUNT)
- err("wrcodec: codec cmd pending expired!");
-
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97EVNT);
- au_sync();
- if (val & PSC_AC97EVNT_CD)
- break;
- }
- if (i == POLL_COUNT)
- err("wrcodec: read cmdwait expired!");
-
- /* Clear command done event.
- */
- au_writel(PSC_AC97EVNT_CD, PSC_AC97EVNT);
- au_sync();
-
- spin_unlock_irqrestore(&s->lock, flags);
-}
-
-static void
-waitcodec(struct ac97_codec *codec)
-{
- u16 temp;
- u32 val;
- int i;
-
- /* codec_wait is used to wait for a ready state after
- * an AC97C_RESET.
- */
- au1550_delay(10);
-
- /* first poll the CODEC_READY tag bit
- */
- for (i = 0; i < POLL_COUNT; i++) {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- if (val & PSC_AC97STAT_CR)
- break;
- }
- if (i == POLL_COUNT) {
- err("waitcodec: CODEC_READY poll expired!");
- return;
- }
-
- /* get AC'97 powerdown control/status register
- */
- temp = rdcodec(codec, AC97_POWER_CONTROL);
-
- /* If anything is powered down, power'em up
- */
- if (temp & 0x7f00) {
- /* Power on
- */
- wrcodec(codec, AC97_POWER_CONTROL, 0);
- au1550_delay(100);
-
- /* Reread
- */
- temp = rdcodec(codec, AC97_POWER_CONTROL);
- }
-
- /* Check if Codec REF,ANL,DAC,ADC ready
- */
- if ((temp & 0x7f0f) != 0x000f)
- err("codec reg 26 status (0x%x) not ready!!", temp);
-}
-
-/* stop the ADC before calling */
-static void
-set_adc_rate(struct au1550_state *s, unsigned rate)
-{
- struct dmabuf *adc = &s->dma_adc;
- struct dmabuf *dac = &s->dma_dac;
- unsigned adc_rate, dac_rate;
- u16 ac97_extstat;
-
- if (s->no_vra) {
- /* calc SRC factor
- */
- adc->src_factor = ((96000 / rate) + 1) >> 1;
- adc->sample_rate = 48000 / adc->src_factor;
- return;
- }
-
- adc->src_factor = 1;
-
- ac97_extstat = rdcodec(s->codec, AC97_EXTENDED_STATUS);
-
- rate = rate > 48000 ? 48000 : rate;
-
- /* enable VRA
- */
- wrcodec(s->codec, AC97_EXTENDED_STATUS,
- ac97_extstat | AC97_EXTSTAT_VRA);
-
- /* now write the sample rate
- */
- wrcodec(s->codec, AC97_PCM_LR_ADC_RATE, (u16) rate);
-
- /* read it back for actual supported rate
- */
- adc_rate = rdcodec(s->codec, AC97_PCM_LR_ADC_RATE);
-
- pr_debug("set_adc_rate: set to %d Hz\n", adc_rate);
-
- /* some codec's don't allow unequal DAC and ADC rates, in which case
- * writing one rate reg actually changes both.
- */
- dac_rate = rdcodec(s->codec, AC97_PCM_FRONT_DAC_RATE);
- if (dac->num_channels > 2)
- wrcodec(s->codec, AC97_PCM_SURR_DAC_RATE, dac_rate);
- if (dac->num_channels > 4)
- wrcodec(s->codec, AC97_PCM_LFE_DAC_RATE, dac_rate);
-
- adc->sample_rate = adc_rate;
- dac->sample_rate = dac_rate;
-}
-
-/* stop the DAC before calling */
-static void
-set_dac_rate(struct au1550_state *s, unsigned rate)
-{
- struct dmabuf *dac = &s->dma_dac;
- struct dmabuf *adc = &s->dma_adc;
- unsigned adc_rate, dac_rate;
- u16 ac97_extstat;
-
- if (s->no_vra) {
- /* calc SRC factor
- */
- dac->src_factor = ((96000 / rate) + 1) >> 1;
- dac->sample_rate = 48000 / dac->src_factor;
- return;
- }
-
- dac->src_factor = 1;
-
- ac97_extstat = rdcodec(s->codec, AC97_EXTENDED_STATUS);
-
- rate = rate > 48000 ? 48000 : rate;
-
- /* enable VRA
- */
- wrcodec(s->codec, AC97_EXTENDED_STATUS,
- ac97_extstat | AC97_EXTSTAT_VRA);
-
- /* now write the sample rate
- */
- wrcodec(s->codec, AC97_PCM_FRONT_DAC_RATE, (u16) rate);
-
- /* I don't support different sample rates for multichannel,
- * so make these channels the same.
- */
- if (dac->num_channels > 2)
- wrcodec(s->codec, AC97_PCM_SURR_DAC_RATE, (u16) rate);
- if (dac->num_channels > 4)
- wrcodec(s->codec, AC97_PCM_LFE_DAC_RATE, (u16) rate);
- /* read it back for actual supported rate
- */
- dac_rate = rdcodec(s->codec, AC97_PCM_FRONT_DAC_RATE);
-
- pr_debug("set_dac_rate: set to %d Hz\n", dac_rate);
-
- /* some codec's don't allow unequal DAC and ADC rates, in which case
- * writing one rate reg actually changes both.
- */
- adc_rate = rdcodec(s->codec, AC97_PCM_LR_ADC_RATE);
-
- dac->sample_rate = dac_rate;
- adc->sample_rate = adc_rate;
-}
-
-static void
-stop_dac(struct au1550_state *s)
-{
- struct dmabuf *db = &s->dma_dac;
- u32 stat;
- unsigned long flags;
-
- if (db->stopped)
- return;
-
- spin_lock_irqsave(&s->lock, flags);
-
- au_writel(PSC_AC97PCR_TP, PSC_AC97PCR);
- au_sync();
-
- /* Wait for Transmit Busy to show disabled.
- */
- do {
- stat = au_readl(PSC_AC97STAT);
- au_sync();
- } while ((stat & PSC_AC97STAT_TB) != 0);
-
- au1xxx_dbdma_reset(db->dmanr);
-
- db->stopped = 1;
-
- spin_unlock_irqrestore(&s->lock, flags);
-}
-
-static void
-stop_adc(struct au1550_state *s)
-{
- struct dmabuf *db = &s->dma_adc;
- unsigned long flags;
- u32 stat;
-
- if (db->stopped)
- return;
-
- spin_lock_irqsave(&s->lock, flags);
-
- au_writel(PSC_AC97PCR_RP, PSC_AC97PCR);
- au_sync();
-
- /* Wait for Receive Busy to show disabled.
- */
- do {
- stat = au_readl(PSC_AC97STAT);
- au_sync();
- } while ((stat & PSC_AC97STAT_RB) != 0);
-
- au1xxx_dbdma_reset(db->dmanr);
-
- db->stopped = 1;
-
- spin_unlock_irqrestore(&s->lock, flags);
-}
-
-
-static void
-set_xmit_slots(int num_channels)
-{
- u32 ac97_config, stat;
-
- ac97_config = au_readl(PSC_AC97CFG);
- au_sync();
- ac97_config &= ~(PSC_AC97CFG_TXSLOT_MASK | PSC_AC97CFG_DE_ENABLE);
- au_writel(ac97_config, PSC_AC97CFG);
- au_sync();
-
- switch (num_channels) {
- case 6: /* stereo with surround and center/LFE,
- * slots 3,4,6,7,8,9
- */
- ac97_config |= PSC_AC97CFG_TXSLOT_ENA(6);
- ac97_config |= PSC_AC97CFG_TXSLOT_ENA(9);
-
- case 4: /* stereo with surround, slots 3,4,7,8 */
- ac97_config |= PSC_AC97CFG_TXSLOT_ENA(7);
- ac97_config |= PSC_AC97CFG_TXSLOT_ENA(8);
-
- case 2: /* stereo, slots 3,4 */
- case 1: /* mono */
- ac97_config |= PSC_AC97CFG_TXSLOT_ENA(3);
- ac97_config |= PSC_AC97CFG_TXSLOT_ENA(4);
- }
-
- au_writel(ac97_config, PSC_AC97CFG);
- au_sync();
-
- ac97_config |= PSC_AC97CFG_DE_ENABLE;
- au_writel(ac97_config, PSC_AC97CFG);
- au_sync();
-
- /* Wait for Device ready.
- */
- do {
- stat = au_readl(PSC_AC97STAT);
- au_sync();
- } while ((stat & PSC_AC97STAT_DR) == 0);
-}
-
-static void
-set_recv_slots(int num_channels)
-{
- u32 ac97_config, stat;
-
- ac97_config = au_readl(PSC_AC97CFG);
- au_sync();
- ac97_config &= ~(PSC_AC97CFG_RXSLOT_MASK | PSC_AC97CFG_DE_ENABLE);
- au_writel(ac97_config, PSC_AC97CFG);
- au_sync();
-
- /* Always enable slots 3 and 4 (stereo). Slot 6 is
- * optional Mic ADC, which we don't support yet.
- */
- ac97_config |= PSC_AC97CFG_RXSLOT_ENA(3);
- ac97_config |= PSC_AC97CFG_RXSLOT_ENA(4);
-
- au_writel(ac97_config, PSC_AC97CFG);
- au_sync();
-
- ac97_config |= PSC_AC97CFG_DE_ENABLE;
- au_writel(ac97_config, PSC_AC97CFG);
- au_sync();
-
- /* Wait for Device ready.
- */
- do {
- stat = au_readl(PSC_AC97STAT);
- au_sync();
- } while ((stat & PSC_AC97STAT_DR) == 0);
-}
-
-/* Hold spinlock for both start_dac() and start_adc() calls */
-static void
-start_dac(struct au1550_state *s)
-{
- struct dmabuf *db = &s->dma_dac;
-
- if (!db->stopped)
- return;
-
- set_xmit_slots(db->num_channels);
- au_writel(PSC_AC97PCR_TC, PSC_AC97PCR);
- au_sync();
- au_writel(PSC_AC97PCR_TS, PSC_AC97PCR);
- au_sync();
-
- au1xxx_dbdma_start(db->dmanr);
-
- db->stopped = 0;
-}
-
-static void
-start_adc(struct au1550_state *s)
-{
- struct dmabuf *db = &s->dma_adc;
- int i;
-
- if (!db->stopped)
- return;
-
- /* Put two buffers on the ring to get things started.
- */
- for (i=0; i<2; i++) {
- au1xxx_dbdma_put_dest(db->dmanr, virt_to_phys(db->nextIn),
- db->dma_fragsize, DDMA_FLAGS_IE);
-
- db->nextIn += db->dma_fragsize;
- if (db->nextIn >= db->rawbuf + db->dmasize)
- db->nextIn -= db->dmasize;
- }
-
- set_recv_slots(db->num_channels);
- au1xxx_dbdma_start(db->dmanr);
- au_writel(PSC_AC97PCR_RC, PSC_AC97PCR);
- au_sync();
- au_writel(PSC_AC97PCR_RS, PSC_AC97PCR);
- au_sync();
-
- db->stopped = 0;
-}
-
-static int
-prog_dmabuf(struct au1550_state *s, struct dmabuf *db)
-{
- unsigned user_bytes_per_sec;
- unsigned bufs;
- unsigned rate = db->sample_rate;
-
- if (!db->rawbuf) {
- db->ready = db->mapped = 0;
- db->buforder = 5; /* 32 * PAGE_SIZE */
- db->rawbuf = kmalloc((PAGE_SIZE << db->buforder), GFP_KERNEL);
- if (!db->rawbuf)
- return -ENOMEM;
- }
-
- db->cnt_factor = 1;
- if (db->sample_size == 8)
- db->cnt_factor *= 2;
- if (db->num_channels == 1)
- db->cnt_factor *= 2;
- db->cnt_factor *= db->src_factor;
-
- db->count = 0;
- db->dma_qcount = 0;
- db->nextIn = db->nextOut = db->rawbuf;
-
- db->user_bytes_per_sample = (db->sample_size>>3) * db->num_channels;
- db->dma_bytes_per_sample = 2 * ((db->num_channels == 1) ?
- 2 : db->num_channels);
-
- user_bytes_per_sec = rate * db->user_bytes_per_sample;
- bufs = PAGE_SIZE << db->buforder;
- if (db->ossfragshift) {
- if ((1000 << db->ossfragshift) < user_bytes_per_sec)
- db->fragshift = ld2(user_bytes_per_sec/1000);
- else
- db->fragshift = db->ossfragshift;
- } else {
- db->fragshift = ld2(user_bytes_per_sec / 100 /
- (db->subdivision ? db->subdivision : 1));
- if (db->fragshift < 3)
- db->fragshift = 3;
- }
-
- db->fragsize = 1 << db->fragshift;
- db->dma_fragsize = db->fragsize * db->cnt_factor;
- db->numfrag = bufs / db->dma_fragsize;
-
- while (db->numfrag < 4 && db->fragshift > 3) {
- db->fragshift--;
- db->fragsize = 1 << db->fragshift;
- db->dma_fragsize = db->fragsize * db->cnt_factor;
- db->numfrag = bufs / db->dma_fragsize;
- }
-
- if (db->ossmaxfrags >= 4 && db->ossmaxfrags < db->numfrag)
- db->numfrag = db->ossmaxfrags;
-
- db->dmasize = db->dma_fragsize * db->numfrag;
- memset(db->rawbuf, 0, bufs);
-
- pr_debug("prog_dmabuf: rate=%d, samplesize=%d, channels=%d\n",
- rate, db->sample_size, db->num_channels);
- pr_debug("prog_dmabuf: fragsize=%d, cnt_factor=%d, dma_fragsize=%d\n",
- db->fragsize, db->cnt_factor, db->dma_fragsize);
- pr_debug("prog_dmabuf: numfrag=%d, dmasize=%d\n", db->numfrag, db->dmasize);
-
- db->ready = 1;
- return 0;
-}
-
-static int
-prog_dmabuf_adc(struct au1550_state *s)
-{
- stop_adc(s);
- return prog_dmabuf(s, &s->dma_adc);
-
-}
-
-static int
-prog_dmabuf_dac(struct au1550_state *s)
-{
- stop_dac(s);
- return prog_dmabuf(s, &s->dma_dac);
-}
-
-
-static void dac_dma_interrupt(int irq, void *dev_id)
-{
- struct au1550_state *s = (struct au1550_state *) dev_id;
- struct dmabuf *db = &s->dma_dac;
- u32 ac97c_stat;
-
- spin_lock(&s->lock);
-
- ac97c_stat = au_readl(PSC_AC97STAT);
- if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE))
- pr_debug("AC97C status = 0x%08x\n", ac97c_stat);
- db->dma_qcount--;
-
- if (db->count >= db->fragsize) {
- if (au1xxx_dbdma_put_source(db->dmanr,
- virt_to_phys(db->nextOut), db->fragsize,
- DDMA_FLAGS_IE) == 0) {
- err("qcount < 2 and no ring room!");
- }
- db->nextOut += db->fragsize;
- if (db->nextOut >= db->rawbuf + db->dmasize)
- db->nextOut -= db->dmasize;
- db->count -= db->fragsize;
- db->total_bytes += db->dma_fragsize;
- db->dma_qcount++;
- }
-
- /* wake up anybody listening */
- if (waitqueue_active(&db->wait))
- wake_up(&db->wait);
-
- spin_unlock(&s->lock);
-}
-
-
-static void adc_dma_interrupt(int irq, void *dev_id)
-{
- struct au1550_state *s = (struct au1550_state *)dev_id;
- struct dmabuf *dp = &s->dma_adc;
- u32 obytes;
- char *obuf;
-
- spin_lock(&s->lock);
-
- /* Pull the buffer from the dma queue.
- */
- au1xxx_dbdma_get_dest(dp->dmanr, (void *)(&obuf), &obytes);
-
- if ((dp->count + obytes) > dp->dmasize) {
- /* Overrun. Stop ADC and log the error
- */
- spin_unlock(&s->lock);
- stop_adc(s);
- dp->error++;
- err("adc overrun");
- return;
- }
-
- /* Put a new empty buffer on the destination DMA.
- */
- au1xxx_dbdma_put_dest(dp->dmanr, virt_to_phys(dp->nextIn),
- dp->dma_fragsize, DDMA_FLAGS_IE);
-
- dp->nextIn += dp->dma_fragsize;
- if (dp->nextIn >= dp->rawbuf + dp->dmasize)
- dp->nextIn -= dp->dmasize;
-
- dp->count += obytes;
- dp->total_bytes += obytes;
-
- /* wake up anybody listening
- */
- if (waitqueue_active(&dp->wait))
- wake_up(&dp->wait);
-
- spin_unlock(&s->lock);
-}
-
-static loff_t
-au1550_llseek(struct file *file, loff_t offset, int origin)
-{
- return -ESPIPE;
-}
-
-
-static int
-au1550_open_mixdev(struct inode *inode, struct file *file)
-{
- mutex_lock(&au1550_ac97_mutex);
- file->private_data = &au1550_state;
- mutex_unlock(&au1550_ac97_mutex);
- return 0;
-}
-
-static int
-au1550_release_mixdev(struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int
-mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd,
- unsigned long arg)
-{
- return codec->mixer_ioctl(codec, cmd, arg);
-}
-
-static long
-au1550_ioctl_mixdev(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct au1550_state *s = file->private_data;
- struct ac97_codec *codec = s->codec;
- int ret;
-
- mutex_lock(&au1550_ac97_mutex);
- ret = mixdev_ioctl(codec, cmd, arg);
- mutex_unlock(&au1550_ac97_mutex);
-
- return ret;
-}
-
-static /*const */ struct file_operations au1550_mixer_fops = {
- .owner = THIS_MODULE,
- .llseek = au1550_llseek,
- .unlocked_ioctl = au1550_ioctl_mixdev,
- .open = au1550_open_mixdev,
- .release = au1550_release_mixdev,
-};
-
-static int
-drain_dac(struct au1550_state *s, int nonblock)
-{
- unsigned long flags;
- int count, tmo;
-
- if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped)
- return 0;
-
- for (;;) {
- spin_lock_irqsave(&s->lock, flags);
- count = s->dma_dac.count;
- spin_unlock_irqrestore(&s->lock, flags);
- if (count <= s->dma_dac.fragsize)
- break;
- if (signal_pending(current))
- break;
- if (nonblock)
- return -EBUSY;
- tmo = 1000 * count / (s->no_vra ?
- 48000 : s->dma_dac.sample_rate);
- tmo /= s->dma_dac.dma_bytes_per_sample;
- au1550_delay(tmo);
- }
- if (signal_pending(current))
- return -ERESTARTSYS;
- return 0;
-}
-
-static inline u8 S16_TO_U8(s16 ch)
-{
- return (u8) (ch >> 8) + 0x80;
-}
-static inline s16 U8_TO_S16(u8 ch)
-{
- return (s16) (ch - 0x80) << 8;
-}
-
-/*
- * Translates user samples to dma buffer suitable for AC'97 DAC data:
- * If mono, copy left channel to right channel in dma buffer.
- * If 8 bit samples, cvt to 16-bit before writing to dma buffer.
- * If interpolating (no VRA), duplicate every audio frame src_factor times.
- */
-static int
-translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf,
- int dmacount)
-{
- int sample, i;
- int interp_bytes_per_sample;
- int num_samples;
- int mono = (db->num_channels == 1);
- char usersample[12];
- s16 ch, dmasample[6];
-
- if (db->sample_size == 16 && !mono && db->src_factor == 1) {
- /* no translation necessary, just copy
- */
- if (copy_from_user(dmabuf, userbuf, dmacount))
- return -EFAULT;
- return dmacount;
- }
-
- interp_bytes_per_sample = db->dma_bytes_per_sample * db->src_factor;
- num_samples = dmacount / interp_bytes_per_sample;
-
- for (sample = 0; sample < num_samples; sample++) {
- if (copy_from_user(usersample, userbuf,
- db->user_bytes_per_sample)) {
- return -EFAULT;
- }
-
- for (i = 0; i < db->num_channels; i++) {
- if (db->sample_size == 8)
- ch = U8_TO_S16(usersample[i]);
- else
- ch = *((s16 *) (&usersample[i * 2]));
- dmasample[i] = ch;
- if (mono)
- dmasample[i + 1] = ch; /* right channel */
- }
-
- /* duplicate every audio frame src_factor times
- */
- for (i = 0; i < db->src_factor; i++)
- memcpy(dmabuf, dmasample, db->dma_bytes_per_sample);
-
- userbuf += db->user_bytes_per_sample;
- dmabuf += interp_bytes_per_sample;
- }
-
- return num_samples * interp_bytes_per_sample;
-}
-
-/*
- * Translates AC'97 ADC samples to user buffer:
- * If mono, send only left channel to user buffer.
- * If 8 bit samples, cvt from 16 to 8 bit before writing to user buffer.
- * If decimating (no VRA), skip over src_factor audio frames.
- */
-static int
-translate_to_user(struct dmabuf *db, char* userbuf, char* dmabuf,
- int dmacount)
-{
- int sample, i;
- int interp_bytes_per_sample;
- int num_samples;
- int mono = (db->num_channels == 1);
- char usersample[12];
-
- if (db->sample_size == 16 && !mono && db->src_factor == 1) {
- /* no translation necessary, just copy
- */
- if (copy_to_user(userbuf, dmabuf, dmacount))
- return -EFAULT;
- return dmacount;
- }
-
- interp_bytes_per_sample = db->dma_bytes_per_sample * db->src_factor;
- num_samples = dmacount / interp_bytes_per_sample;
-
- for (sample = 0; sample < num_samples; sample++) {
- for (i = 0; i < db->num_channels; i++) {
- if (db->sample_size == 8)
- usersample[i] =
- S16_TO_U8(*((s16 *) (&dmabuf[i * 2])));
- else
- *((s16 *) (&usersample[i * 2])) =
- *((s16 *) (&dmabuf[i * 2]));
- }
-
- if (copy_to_user(userbuf, usersample,
- db->user_bytes_per_sample)) {
- return -EFAULT;
- }
-
- userbuf += db->user_bytes_per_sample;
- dmabuf += interp_bytes_per_sample;
- }
-
- return num_samples * interp_bytes_per_sample;
-}
-
-/*
- * Copy audio data to/from user buffer from/to dma buffer, taking care
- * that we wrap when reading/writing the dma buffer. Returns actual byte
- * count written to or read from the dma buffer.
- */
-static int
-copy_dmabuf_user(struct dmabuf *db, char* userbuf, int count, int to_user)
-{
- char *bufptr = to_user ? db->nextOut : db->nextIn;
- char *bufend = db->rawbuf + db->dmasize;
- int cnt, ret;
-
- if (bufptr + count > bufend) {
- int partial = (int) (bufend - bufptr);
- if (to_user) {
- if ((cnt = translate_to_user(db, userbuf,
- bufptr, partial)) < 0)
- return cnt;
- ret = cnt;
- if ((cnt = translate_to_user(db, userbuf + partial,
- db->rawbuf,
- count - partial)) < 0)
- return cnt;
- ret += cnt;
- } else {
- if ((cnt = translate_from_user(db, bufptr, userbuf,
- partial)) < 0)
- return cnt;
- ret = cnt;
- if ((cnt = translate_from_user(db, db->rawbuf,
- userbuf + partial,
- count - partial)) < 0)
- return cnt;
- ret += cnt;
- }
- } else {
- if (to_user)
- ret = translate_to_user(db, userbuf, bufptr, count);
- else
- ret = translate_from_user(db, bufptr, userbuf, count);
- }
-
- return ret;
-}
-
-
-static ssize_t
-au1550_read(struct file *file, char *buffer, size_t count, loff_t *ppos)
-{
- struct au1550_state *s = file->private_data;
- struct dmabuf *db = &s->dma_adc;
- DECLARE_WAITQUEUE(wait, current);
- ssize_t ret;
- unsigned long flags;
- int cnt, usercnt, avail;
-
- if (db->mapped)
- return -ENXIO;
- if (!access_ok(VERIFY_WRITE, buffer, count))
- return -EFAULT;
- ret = 0;
-
- count *= db->cnt_factor;
-
- mutex_lock(&s->sem);
- add_wait_queue(&db->wait, &wait);
-
- while (count > 0) {
- /* wait for samples in ADC dma buffer
- */
- do {
- spin_lock_irqsave(&s->lock, flags);
- if (db->stopped)
- start_adc(s);
- avail = db->count;
- if (avail <= 0)
- __set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&s->lock, flags);
- if (avail <= 0) {
- if (file->f_flags & O_NONBLOCK) {
- if (!ret)
- ret = -EAGAIN;
- goto out;
- }
- mutex_unlock(&s->sem);
- schedule();
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- goto out2;
- }
- mutex_lock(&s->sem);
- }
- } while (avail <= 0);
-
- /* copy from nextOut to user
- */
- if ((cnt = copy_dmabuf_user(db, buffer,
- count > avail ?
- avail : count, 1)) < 0) {
- if (!ret)
- ret = -EFAULT;
- goto out;
- }
-
- spin_lock_irqsave(&s->lock, flags);
- db->count -= cnt;
- db->nextOut += cnt;
- if (db->nextOut >= db->rawbuf + db->dmasize)
- db->nextOut -= db->dmasize;
- spin_unlock_irqrestore(&s->lock, flags);
-
- count -= cnt;
- usercnt = cnt / db->cnt_factor;
- buffer += usercnt;
- ret += usercnt;
- } /* while (count > 0) */
-
-out:
- mutex_unlock(&s->sem);
-out2:
- remove_wait_queue(&db->wait, &wait);
- set_current_state(TASK_RUNNING);
- return ret;
-}
-
-static ssize_t
-au1550_write(struct file *file, const char *buffer, size_t count, loff_t * ppos)
-{
- struct au1550_state *s = file->private_data;
- struct dmabuf *db = &s->dma_dac;
- DECLARE_WAITQUEUE(wait, current);
- ssize_t ret = 0;
- unsigned long flags;
- int cnt, usercnt, avail;
-
- pr_debug("write: count=%d\n", count);
-
- if (db->mapped)
- return -ENXIO;
- if (!access_ok(VERIFY_READ, buffer, count))
- return -EFAULT;
-
- count *= db->cnt_factor;
-
- mutex_lock(&s->sem);
- add_wait_queue(&db->wait, &wait);
-
- while (count > 0) {
- /* wait for space in playback buffer
- */
- do {
- spin_lock_irqsave(&s->lock, flags);
- avail = (int) db->dmasize - db->count;
- if (avail <= 0)
- __set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&s->lock, flags);
- if (avail <= 0) {
- if (file->f_flags & O_NONBLOCK) {
- if (!ret)
- ret = -EAGAIN;
- goto out;
- }
- mutex_unlock(&s->sem);
- schedule();
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- goto out2;
- }
- mutex_lock(&s->sem);
- }
- } while (avail <= 0);
-
- /* copy from user to nextIn
- */
- if ((cnt = copy_dmabuf_user(db, (char *) buffer,
- count > avail ?
- avail : count, 0)) < 0) {
- if (!ret)
- ret = -EFAULT;
- goto out;
- }
-
- spin_lock_irqsave(&s->lock, flags);
- db->count += cnt;
- db->nextIn += cnt;
- if (db->nextIn >= db->rawbuf + db->dmasize)
- db->nextIn -= db->dmasize;
-
- /* If the data is available, we want to keep two buffers
- * on the dma queue. If the queue count reaches zero,
- * we know the dma has stopped.
- */
- while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) {
- if (au1xxx_dbdma_put_source(db->dmanr,
- virt_to_phys(db->nextOut), db->fragsize,
- DDMA_FLAGS_IE) == 0) {
- err("qcount < 2 and no ring room!");
- }
- db->nextOut += db->fragsize;
- if (db->nextOut >= db->rawbuf + db->dmasize)
- db->nextOut -= db->dmasize;
- db->total_bytes += db->dma_fragsize;
- if (db->dma_qcount == 0)
- start_dac(s);
- db->dma_qcount++;
- }
- spin_unlock_irqrestore(&s->lock, flags);
-
- count -= cnt;
- usercnt = cnt / db->cnt_factor;
- buffer += usercnt;
- ret += usercnt;
- } /* while (count > 0) */
-
-out:
- mutex_unlock(&s->sem);
-out2:
- remove_wait_queue(&db->wait, &wait);
- set_current_state(TASK_RUNNING);
- return ret;
-}
-
-
-/* No kernel lock - we have our own spinlock */
-static unsigned int
-au1550_poll(struct file *file, struct poll_table_struct *wait)
-{
- struct au1550_state *s = file->private_data;
- unsigned long flags;
- unsigned int mask = 0;
-
- if (file->f_mode & FMODE_WRITE) {
- if (!s->dma_dac.ready)
- return 0;
- poll_wait(file, &s->dma_dac.wait, wait);
- }
- if (file->f_mode & FMODE_READ) {
- if (!s->dma_adc.ready)
- return 0;
- poll_wait(file, &s->dma_adc.wait, wait);
- }
-
- spin_lock_irqsave(&s->lock, flags);
-
- if (file->f_mode & FMODE_READ) {
- if (s->dma_adc.count >= (signed)s->dma_adc.dma_fragsize)
- mask |= POLLIN | POLLRDNORM;
- }
- if (file->f_mode & FMODE_WRITE) {
- if (s->dma_dac.mapped) {
- if (s->dma_dac.count >=
- (signed)s->dma_dac.dma_fragsize)
- mask |= POLLOUT | POLLWRNORM;
- } else {
- if ((signed) s->dma_dac.dmasize >=
- s->dma_dac.count + (signed)s->dma_dac.dma_fragsize)
- mask |= POLLOUT | POLLWRNORM;
- }
- }
- spin_unlock_irqrestore(&s->lock, flags);
- return mask;
-}
-
-static int
-au1550_mmap(struct file *file, struct vm_area_struct *vma)
-{
- struct au1550_state *s = file->private_data;
- struct dmabuf *db;
- unsigned long size;
- int ret = 0;
-
- mutex_lock(&au1550_ac97_mutex);
- mutex_lock(&s->sem);
- if (vma->vm_flags & VM_WRITE)
- db = &s->dma_dac;
- else if (vma->vm_flags & VM_READ)
- db = &s->dma_adc;
- else {
- ret = -EINVAL;
- goto out;
- }
- if (vma->vm_pgoff != 0) {
- ret = -EINVAL;
- goto out;
- }
- size = vma->vm_end - vma->vm_start;
- if (size > (PAGE_SIZE << db->buforder)) {
- ret = -EINVAL;
- goto out;
- }
- if (remap_pfn_range(vma, vma->vm_start, page_to_pfn(virt_to_page(db->rawbuf)),
- size, vma->vm_page_prot)) {
- ret = -EAGAIN;
- goto out;
- }
- vma->vm_flags &= ~VM_IO;
- db->mapped = 1;
-out:
- mutex_unlock(&s->sem);
- mutex_unlock(&au1550_ac97_mutex);
- return ret;
-}
-
-#ifdef DEBUG
-static struct ioctl_str_t {
- unsigned int cmd;
- const char *str;
-} ioctl_str[] = {
- {SNDCTL_DSP_RESET, "SNDCTL_DSP_RESET"},
- {SNDCTL_DSP_SYNC, "SNDCTL_DSP_SYNC"},
- {SNDCTL_DSP_SPEED, "SNDCTL_DSP_SPEED"},
- {SNDCTL_DSP_STEREO, "SNDCTL_DSP_STEREO"},
- {SNDCTL_DSP_GETBLKSIZE, "SNDCTL_DSP_GETBLKSIZE"},
- {SNDCTL_DSP_SAMPLESIZE, "SNDCTL_DSP_SAMPLESIZE"},
- {SNDCTL_DSP_CHANNELS, "SNDCTL_DSP_CHANNELS"},
- {SOUND_PCM_WRITE_CHANNELS, "SOUND_PCM_WRITE_CHANNELS"},
- {SOUND_PCM_WRITE_FILTER, "SOUND_PCM_WRITE_FILTER"},
- {SNDCTL_DSP_POST, "SNDCTL_DSP_POST"},
- {SNDCTL_DSP_SUBDIVIDE, "SNDCTL_DSP_SUBDIVIDE"},
- {SNDCTL_DSP_SETFRAGMENT, "SNDCTL_DSP_SETFRAGMENT"},
- {SNDCTL_DSP_GETFMTS, "SNDCTL_DSP_GETFMTS"},
- {SNDCTL_DSP_SETFMT, "SNDCTL_DSP_SETFMT"},
- {SNDCTL_DSP_GETOSPACE, "SNDCTL_DSP_GETOSPACE"},
- {SNDCTL_DSP_GETISPACE, "SNDCTL_DSP_GETISPACE"},
- {SNDCTL_DSP_NONBLOCK, "SNDCTL_DSP_NONBLOCK"},
- {SNDCTL_DSP_GETCAPS, "SNDCTL_DSP_GETCAPS"},
- {SNDCTL_DSP_GETTRIGGER, "SNDCTL_DSP_GETTRIGGER"},
- {SNDCTL_DSP_SETTRIGGER, "SNDCTL_DSP_SETTRIGGER"},
- {SNDCTL_DSP_GETIPTR, "SNDCTL_DSP_GETIPTR"},
- {SNDCTL_DSP_GETOPTR, "SNDCTL_DSP_GETOPTR"},
- {SNDCTL_DSP_MAPINBUF, "SNDCTL_DSP_MAPINBUF"},
- {SNDCTL_DSP_MAPOUTBUF, "SNDCTL_DSP_MAPOUTBUF"},
- {SNDCTL_DSP_SETSYNCRO, "SNDCTL_DSP_SETSYNCRO"},
- {SNDCTL_DSP_SETDUPLEX, "SNDCTL_DSP_SETDUPLEX"},
- {SNDCTL_DSP_GETODELAY, "SNDCTL_DSP_GETODELAY"},
- {SNDCTL_DSP_GETCHANNELMASK, "SNDCTL_DSP_GETCHANNELMASK"},
- {SNDCTL_DSP_BIND_CHANNEL, "SNDCTL_DSP_BIND_CHANNEL"},
- {OSS_GETVERSION, "OSS_GETVERSION"},
- {SOUND_PCM_READ_RATE, "SOUND_PCM_READ_RATE"},
- {SOUND_PCM_READ_CHANNELS, "SOUND_PCM_READ_CHANNELS"},
- {SOUND_PCM_READ_BITS, "SOUND_PCM_READ_BITS"},
- {SOUND_PCM_READ_FILTER, "SOUND_PCM_READ_FILTER"}
-};
-#endif
-
-static int
-dma_count_done(struct dmabuf *db)
-{
- if (db->stopped)
- return 0;
-
- return db->dma_fragsize - au1xxx_get_dma_residue(db->dmanr);
-}
-
-
-static int
-au1550_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct au1550_state *s = file->private_data;
- unsigned long flags;
- audio_buf_info abinfo;
- count_info cinfo;
- int count;
- int val, mapped, ret, diff;
-
- mapped = ((file->f_mode & FMODE_WRITE) && s->dma_dac.mapped) ||
- ((file->f_mode & FMODE_READ) && s->dma_adc.mapped);
-
-#ifdef DEBUG
- for (count = 0; count < ARRAY_SIZE(ioctl_str); count++) {
- if (ioctl_str[count].cmd == cmd)
- break;
- }
- if (count < ARRAY_SIZE(ioctl_str))
- pr_debug("ioctl %s, arg=0x%lxn", ioctl_str[count].str, arg);
- else
- pr_debug("ioctl 0x%x unknown, arg=0x%lx\n", cmd, arg);
-#endif
-
- switch (cmd) {
- case OSS_GETVERSION:
- return put_user(SOUND_VERSION, (int *) arg);
-
- case SNDCTL_DSP_SYNC:
- if (file->f_mode & FMODE_WRITE)
- return drain_dac(s, file->f_flags & O_NONBLOCK);
- return 0;
-
- case SNDCTL_DSP_SETDUPLEX:
- return 0;
-
- case SNDCTL_DSP_GETCAPS:
- return put_user(DSP_CAP_DUPLEX | DSP_CAP_REALTIME |
- DSP_CAP_TRIGGER | DSP_CAP_MMAP, (int *)arg);
-
- case SNDCTL_DSP_RESET:
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- synchronize_irq();
- s->dma_dac.count = s->dma_dac.total_bytes = 0;
- s->dma_dac.nextIn = s->dma_dac.nextOut =
- s->dma_dac.rawbuf;
- }
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- synchronize_irq();
- s->dma_adc.count = s->dma_adc.total_bytes = 0;
- s->dma_adc.nextIn = s->dma_adc.nextOut =
- s->dma_adc.rawbuf;
- }
- return 0;
-
- case SNDCTL_DSP_SPEED:
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (val >= 0) {
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- set_adc_rate(s, val);
- }
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- set_dac_rate(s, val);
- }
- if (s->open_mode & FMODE_READ)
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- if (s->open_mode & FMODE_WRITE)
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
- return put_user((file->f_mode & FMODE_READ) ?
- s->dma_adc.sample_rate :
- s->dma_dac.sample_rate,
- (int *)arg);
-
- case SNDCTL_DSP_STEREO:
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- s->dma_adc.num_channels = val ? 2 : 1;
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- }
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- s->dma_dac.num_channels = val ? 2 : 1;
- if (s->codec_ext_caps & AC97_EXT_DACS) {
- /* disable surround and center/lfe in AC'97
- */
- u16 ext_stat = rdcodec(s->codec,
- AC97_EXTENDED_STATUS);
- wrcodec(s->codec, AC97_EXTENDED_STATUS,
- ext_stat | (AC97_EXTSTAT_PRI |
- AC97_EXTSTAT_PRJ |
- AC97_EXTSTAT_PRK));
- }
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
- return 0;
-
- case SNDCTL_DSP_CHANNELS:
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (val != 0) {
- if (file->f_mode & FMODE_READ) {
- if (val < 0 || val > 2)
- return -EINVAL;
- stop_adc(s);
- s->dma_adc.num_channels = val;
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- }
- if (file->f_mode & FMODE_WRITE) {
- switch (val) {
- case 1:
- case 2:
- break;
- case 3:
- case 5:
- return -EINVAL;
- case 4:
- if (!(s->codec_ext_caps &
- AC97_EXTID_SDAC))
- return -EINVAL;
- break;
- case 6:
- if ((s->codec_ext_caps &
- AC97_EXT_DACS) != AC97_EXT_DACS)
- return -EINVAL;
- break;
- default:
- return -EINVAL;
- }
-
- stop_dac(s);
- if (val <= 2 &&
- (s->codec_ext_caps & AC97_EXT_DACS)) {
- /* disable surround and center/lfe
- * channels in AC'97
- */
- u16 ext_stat =
- rdcodec(s->codec,
- AC97_EXTENDED_STATUS);
- wrcodec(s->codec,
- AC97_EXTENDED_STATUS,
- ext_stat | (AC97_EXTSTAT_PRI |
- AC97_EXTSTAT_PRJ |
- AC97_EXTSTAT_PRK));
- } else if (val >= 4) {
- /* enable surround, center/lfe
- * channels in AC'97
- */
- u16 ext_stat =
- rdcodec(s->codec,
- AC97_EXTENDED_STATUS);
- ext_stat &= ~AC97_EXTSTAT_PRJ;
- if (val == 6)
- ext_stat &=
- ~(AC97_EXTSTAT_PRI |
- AC97_EXTSTAT_PRK);
- wrcodec(s->codec,
- AC97_EXTENDED_STATUS,
- ext_stat);
- }
-
- s->dma_dac.num_channels = val;
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
- }
- return put_user(val, (int *) arg);
-
- case SNDCTL_DSP_GETFMTS: /* Returns a mask */
- return put_user(AFMT_S16_LE | AFMT_U8, (int *) arg);
-
- case SNDCTL_DSP_SETFMT: /* Selects ONE fmt */
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (val != AFMT_QUERY) {
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- if (val == AFMT_S16_LE)
- s->dma_adc.sample_size = 16;
- else {
- val = AFMT_U8;
- s->dma_adc.sample_size = 8;
- }
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- }
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- if (val == AFMT_S16_LE)
- s->dma_dac.sample_size = 16;
- else {
- val = AFMT_U8;
- s->dma_dac.sample_size = 8;
- }
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
- } else {
- if (file->f_mode & FMODE_READ)
- val = (s->dma_adc.sample_size == 16) ?
- AFMT_S16_LE : AFMT_U8;
- else
- val = (s->dma_dac.sample_size == 16) ?
- AFMT_S16_LE : AFMT_U8;
- }
- return put_user(val, (int *) arg);
-
- case SNDCTL_DSP_POST:
- return 0;
-
- case SNDCTL_DSP_GETTRIGGER:
- val = 0;
- spin_lock_irqsave(&s->lock, flags);
- if (file->f_mode & FMODE_READ && !s->dma_adc.stopped)
- val |= PCM_ENABLE_INPUT;
- if (file->f_mode & FMODE_WRITE && !s->dma_dac.stopped)
- val |= PCM_ENABLE_OUTPUT;
- spin_unlock_irqrestore(&s->lock, flags);
- return put_user(val, (int *) arg);
-
- case SNDCTL_DSP_SETTRIGGER:
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (file->f_mode & FMODE_READ) {
- if (val & PCM_ENABLE_INPUT) {
- spin_lock_irqsave(&s->lock, flags);
- start_adc(s);
- spin_unlock_irqrestore(&s->lock, flags);
- } else
- stop_adc(s);
- }
- if (file->f_mode & FMODE_WRITE) {
- if (val & PCM_ENABLE_OUTPUT) {
- spin_lock_irqsave(&s->lock, flags);
- start_dac(s);
- spin_unlock_irqrestore(&s->lock, flags);
- } else
- stop_dac(s);
- }
- return 0;
-
- case SNDCTL_DSP_GETOSPACE:
- if (!(file->f_mode & FMODE_WRITE))
- return -EINVAL;
- abinfo.fragsize = s->dma_dac.fragsize;
- spin_lock_irqsave(&s->lock, flags);
- count = s->dma_dac.count;
- count -= dma_count_done(&s->dma_dac);
- spin_unlock_irqrestore(&s->lock, flags);
- if (count < 0)
- count = 0;
- abinfo.bytes = (s->dma_dac.dmasize - count) /
- s->dma_dac.cnt_factor;
- abinfo.fragstotal = s->dma_dac.numfrag;
- abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift;
- pr_debug("ioctl SNDCTL_DSP_GETOSPACE: bytes=%d, fragments=%d\n", abinfo.bytes, abinfo.fragments);
- return copy_to_user((void *) arg, &abinfo,
- sizeof(abinfo)) ? -EFAULT : 0;
-
- case SNDCTL_DSP_GETISPACE:
- if (!(file->f_mode & FMODE_READ))
- return -EINVAL;
- abinfo.fragsize = s->dma_adc.fragsize;
- spin_lock_irqsave(&s->lock, flags);
- count = s->dma_adc.count;
- count += dma_count_done(&s->dma_adc);
- spin_unlock_irqrestore(&s->lock, flags);
- if (count < 0)
- count = 0;
- abinfo.bytes = count / s->dma_adc.cnt_factor;
- abinfo.fragstotal = s->dma_adc.numfrag;
- abinfo.fragments = abinfo.bytes >> s->dma_adc.fragshift;
- return copy_to_user((void *) arg, &abinfo,
- sizeof(abinfo)) ? -EFAULT : 0;
-
- case SNDCTL_DSP_NONBLOCK:
- spin_lock(&file->f_lock);
- file->f_flags |= O_NONBLOCK;
- spin_unlock(&file->f_lock);
- return 0;
-
- case SNDCTL_DSP_GETODELAY:
- if (!(file->f_mode & FMODE_WRITE))
- return -EINVAL;
- spin_lock_irqsave(&s->lock, flags);
- count = s->dma_dac.count;
- count -= dma_count_done(&s->dma_dac);
- spin_unlock_irqrestore(&s->lock, flags);
- if (count < 0)
- count = 0;
- count /= s->dma_dac.cnt_factor;
- return put_user(count, (int *) arg);
-
- case SNDCTL_DSP_GETIPTR:
- if (!(file->f_mode & FMODE_READ))
- return -EINVAL;
- spin_lock_irqsave(&s->lock, flags);
- cinfo.bytes = s->dma_adc.total_bytes;
- count = s->dma_adc.count;
- if (!s->dma_adc.stopped) {
- diff = dma_count_done(&s->dma_adc);
- count += diff;
- cinfo.bytes += diff;
- cinfo.ptr = virt_to_phys(s->dma_adc.nextIn) + diff -
- virt_to_phys(s->dma_adc.rawbuf);
- } else
- cinfo.ptr = virt_to_phys(s->dma_adc.nextIn) -
- virt_to_phys(s->dma_adc.rawbuf);
- if (s->dma_adc.mapped)
- s->dma_adc.count &= (s->dma_adc.dma_fragsize-1);
- spin_unlock_irqrestore(&s->lock, flags);
- if (count < 0)
- count = 0;
- cinfo.blocks = count >> s->dma_adc.fragshift;
- return copy_to_user((void *) arg, &cinfo, sizeof(cinfo));
-
- case SNDCTL_DSP_GETOPTR:
- if (!(file->f_mode & FMODE_READ))
- return -EINVAL;
- spin_lock_irqsave(&s->lock, flags);
- cinfo.bytes = s->dma_dac.total_bytes;
- count = s->dma_dac.count;
- if (!s->dma_dac.stopped) {
- diff = dma_count_done(&s->dma_dac);
- count -= diff;
- cinfo.bytes += diff;
- cinfo.ptr = virt_to_phys(s->dma_dac.nextOut) + diff -
- virt_to_phys(s->dma_dac.rawbuf);
- } else
- cinfo.ptr = virt_to_phys(s->dma_dac.nextOut) -
- virt_to_phys(s->dma_dac.rawbuf);
- if (s->dma_dac.mapped)
- s->dma_dac.count &= (s->dma_dac.dma_fragsize-1);
- spin_unlock_irqrestore(&s->lock, flags);
- if (count < 0)
- count = 0;
- cinfo.blocks = count >> s->dma_dac.fragshift;
- return copy_to_user((void *) arg, &cinfo, sizeof(cinfo));
-
- case SNDCTL_DSP_GETBLKSIZE:
- if (file->f_mode & FMODE_WRITE)
- return put_user(s->dma_dac.fragsize, (int *) arg);
- else
- return put_user(s->dma_adc.fragsize, (int *) arg);
-
- case SNDCTL_DSP_SETFRAGMENT:
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- s->dma_adc.ossfragshift = val & 0xffff;
- s->dma_adc.ossmaxfrags = (val >> 16) & 0xffff;
- if (s->dma_adc.ossfragshift < 4)
- s->dma_adc.ossfragshift = 4;
- if (s->dma_adc.ossfragshift > 15)
- s->dma_adc.ossfragshift = 15;
- if (s->dma_adc.ossmaxfrags < 4)
- s->dma_adc.ossmaxfrags = 4;
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- }
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- s->dma_dac.ossfragshift = val & 0xffff;
- s->dma_dac.ossmaxfrags = (val >> 16) & 0xffff;
- if (s->dma_dac.ossfragshift < 4)
- s->dma_dac.ossfragshift = 4;
- if (s->dma_dac.ossfragshift > 15)
- s->dma_dac.ossfragshift = 15;
- if (s->dma_dac.ossmaxfrags < 4)
- s->dma_dac.ossmaxfrags = 4;
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
- return 0;
-
- case SNDCTL_DSP_SUBDIVIDE:
- if ((file->f_mode & FMODE_READ && s->dma_adc.subdivision) ||
- (file->f_mode & FMODE_WRITE && s->dma_dac.subdivision))
- return -EINVAL;
- if (get_user(val, (int *) arg))
- return -EFAULT;
- if (val != 1 && val != 2 && val != 4)
- return -EINVAL;
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- s->dma_adc.subdivision = val;
- if ((ret = prog_dmabuf_adc(s)))
- return ret;
- }
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- s->dma_dac.subdivision = val;
- if ((ret = prog_dmabuf_dac(s)))
- return ret;
- }
- return 0;
-
- case SOUND_PCM_READ_RATE:
- return put_user((file->f_mode & FMODE_READ) ?
- s->dma_adc.sample_rate :
- s->dma_dac.sample_rate,
- (int *)arg);
-
- case SOUND_PCM_READ_CHANNELS:
- if (file->f_mode & FMODE_READ)
- return put_user(s->dma_adc.num_channels, (int *)arg);
- else
- return put_user(s->dma_dac.num_channels, (int *)arg);
-
- case SOUND_PCM_READ_BITS:
- if (file->f_mode & FMODE_READ)
- return put_user(s->dma_adc.sample_size, (int *)arg);
- else
- return put_user(s->dma_dac.sample_size, (int *)arg);
-
- case SOUND_PCM_WRITE_FILTER:
- case SNDCTL_DSP_SETSYNCRO:
- case SOUND_PCM_READ_FILTER:
- return -EINVAL;
- }
-
- return mixdev_ioctl(s->codec, cmd, arg);
-}
-
-static long
-au1550_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- int ret;
-
- mutex_lock(&au1550_ac97_mutex);
- ret = au1550_ioctl(file, cmd, arg);
- mutex_unlock(&au1550_ac97_mutex);
-
- return ret;
-}
-
-static int
-au1550_open(struct inode *inode, struct file *file)
-{
- int minor = MINOR(inode->i_rdev);
- DECLARE_WAITQUEUE(wait, current);
- struct au1550_state *s = &au1550_state;
- int ret;
-
-#ifdef DEBUG
- if (file->f_flags & O_NONBLOCK)
- pr_debug("open: non-blocking\n");
- else
- pr_debug("open: blocking\n");
-#endif
-
- file->private_data = s;
- mutex_lock(&au1550_ac97_mutex);
- /* wait for device to become free */
- mutex_lock(&s->open_mutex);
- while (s->open_mode & file->f_mode) {
- ret = -EBUSY;
- if (file->f_flags & O_NONBLOCK)
- goto out;
- add_wait_queue(&s->open_wait, &wait);
- __set_current_state(TASK_INTERRUPTIBLE);
- mutex_unlock(&s->open_mutex);
- schedule();
- remove_wait_queue(&s->open_wait, &wait);
- set_current_state(TASK_RUNNING);
- ret = -ERESTARTSYS;
- if (signal_pending(current))
- goto out2;
- mutex_lock(&s->open_mutex);
- }
-
- stop_dac(s);
- stop_adc(s);
-
- if (file->f_mode & FMODE_READ) {
- s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags =
- s->dma_adc.subdivision = s->dma_adc.total_bytes = 0;
- s->dma_adc.num_channels = 1;
- s->dma_adc.sample_size = 8;
- set_adc_rate(s, 8000);
- if ((minor & 0xf) == SND_DEV_DSP16)
- s->dma_adc.sample_size = 16;
- }
-
- if (file->f_mode & FMODE_WRITE) {
- s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags =
- s->dma_dac.subdivision = s->dma_dac.total_bytes = 0;
- s->dma_dac.num_channels = 1;
- s->dma_dac.sample_size = 8;
- set_dac_rate(s, 8000);
- if ((minor & 0xf) == SND_DEV_DSP16)
- s->dma_dac.sample_size = 16;
- }
-
- if (file->f_mode & FMODE_READ) {
- if ((ret = prog_dmabuf_adc(s)))
- goto out;
- }
- if (file->f_mode & FMODE_WRITE) {
- if ((ret = prog_dmabuf_dac(s)))
- goto out;
- }
-
- s->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
- mutex_init(&s->sem);
- ret = 0;
-out:
- mutex_unlock(&s->open_mutex);
-out2:
- mutex_unlock(&au1550_ac97_mutex);
- return ret;
-}
-
-static int
-au1550_release(struct inode *inode, struct file *file)
-{
- struct au1550_state *s = file->private_data;
-
- mutex_lock(&au1550_ac97_mutex);
-
- if (file->f_mode & FMODE_WRITE) {
- mutex_unlock(&au1550_ac97_mutex);
- drain_dac(s, file->f_flags & O_NONBLOCK);
- mutex_lock(&au1550_ac97_mutex);
- }
-
- mutex_lock(&s->open_mutex);
- if (file->f_mode & FMODE_WRITE) {
- stop_dac(s);
- kfree(s->dma_dac.rawbuf);
- s->dma_dac.rawbuf = NULL;
- }
- if (file->f_mode & FMODE_READ) {
- stop_adc(s);
- kfree(s->dma_adc.rawbuf);
- s->dma_adc.rawbuf = NULL;
- }
- s->open_mode &= ((~file->f_mode) & (FMODE_READ|FMODE_WRITE));
- mutex_unlock(&s->open_mutex);
- wake_up(&s->open_wait);
- mutex_unlock(&au1550_ac97_mutex);
- return 0;
-}
-
-static /*const */ struct file_operations au1550_audio_fops = {
- .owner = THIS_MODULE,
- .llseek = au1550_llseek,
- .read = au1550_read,
- .write = au1550_write,
- .poll = au1550_poll,
- .unlocked_ioctl = au1550_unlocked_ioctl,
- .mmap = au1550_mmap,
- .open = au1550_open,
- .release = au1550_release,
-};
-
-MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com");
-MODULE_DESCRIPTION("Au1550 AC97 Audio Driver");
-MODULE_LICENSE("GPL");
-
-
-static int __devinit
-au1550_probe(void)
-{
- struct au1550_state *s = &au1550_state;
- int val;
-
- memset(s, 0, sizeof(struct au1550_state));
-
- init_waitqueue_head(&s->dma_adc.wait);
- init_waitqueue_head(&s->dma_dac.wait);
- init_waitqueue_head(&s->open_wait);
- mutex_init(&s->open_mutex);
- spin_lock_init(&s->lock);
-
- s->codec = ac97_alloc_codec();
- if(s->codec == NULL) {
- err("Out of memory");
- return -1;
- }
- s->codec->private_data = s;
- s->codec->id = 0;
- s->codec->codec_read = rdcodec;
- s->codec->codec_write = wrcodec;
- s->codec->codec_wait = waitcodec;
-
- if (!request_mem_region(CPHYSADDR(AC97_PSC_SEL),
- 0x30, "Au1550 AC97")) {
- err("AC'97 ports in use");
- }
-
- /* Allocate the DMA Channels
- */
- if ((s->dma_dac.dmanr = au1xxx_dbdma_chan_alloc(DBDMA_MEM_CHAN,
- DBDMA_AC97_TX_CHAN, dac_dma_interrupt, (void *)s)) == 0) {
- err("Can't get DAC DMA");
- goto err_dma1;
- }
- au1xxx_dbdma_set_devwidth(s->dma_dac.dmanr, 16);
- if (au1xxx_dbdma_ring_alloc(s->dma_dac.dmanr,
- NUM_DBDMA_DESCRIPTORS) == 0) {
- err("Can't get DAC DMA descriptors");
- goto err_dma1;
- }
-
- if ((s->dma_adc.dmanr = au1xxx_dbdma_chan_alloc(DBDMA_AC97_RX_CHAN,
- DBDMA_MEM_CHAN, adc_dma_interrupt, (void *)s)) == 0) {
- err("Can't get ADC DMA");
- goto err_dma2;
- }
- au1xxx_dbdma_set_devwidth(s->dma_adc.dmanr, 16);
- if (au1xxx_dbdma_ring_alloc(s->dma_adc.dmanr,
- NUM_DBDMA_DESCRIPTORS) == 0) {
- err("Can't get ADC DMA descriptors");
- goto err_dma2;
- }
-
- pr_info("DAC: DMA%d, ADC: DMA%d", DBDMA_AC97_TX_CHAN, DBDMA_AC97_RX_CHAN);
-
- /* register devices */
-
- if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0)
- goto err_dev1;
- if ((s->codec->dev_mixer =
- register_sound_mixer(&au1550_mixer_fops, -1)) < 0)
- goto err_dev2;
-
- /* The GPIO for the appropriate PSC was configured by the
- * board specific start up.
- *
- * configure PSC for AC'97
- */
- au_writel(0, AC97_PSC_CTRL); /* Disable PSC */
- au_sync();
- au_writel((PSC_SEL_CLK_SERCLK | PSC_SEL_PS_AC97MODE), AC97_PSC_SEL);
- au_sync();
-
- /* cold reset the AC'97
- */
- au_writel(PSC_AC97RST_RST, PSC_AC97RST);
- au_sync();
- au1550_delay(10);
- au_writel(0, PSC_AC97RST);
- au_sync();
-
- /* need to delay around 500msec(bleech) to give
- some CODECs enough time to wakeup */
- au1550_delay(500);
-
- /* warm reset the AC'97 to start the bitclk
- */
- au_writel(PSC_AC97RST_SNC, PSC_AC97RST);
- au_sync();
- udelay(100);
- au_writel(0, PSC_AC97RST);
- au_sync();
-
- /* Enable PSC
- */
- au_writel(PSC_CTRL_ENABLE, AC97_PSC_CTRL);
- au_sync();
-
- /* Wait for PSC ready.
- */
- do {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- } while ((val & PSC_AC97STAT_SR) == 0);
-
- /* Configure AC97 controller.
- * Deep FIFO, 16-bit sample, DMA, make sure DMA matches fifo size.
- */
- val = PSC_AC97CFG_SET_LEN(16);
- val |= PSC_AC97CFG_RT_FIFO8 | PSC_AC97CFG_TT_FIFO8;
-
- /* Enable device so we can at least
- * talk over the AC-link.
- */
- au_writel(val, PSC_AC97CFG);
- au_writel(PSC_AC97MSK_ALLMASK, PSC_AC97MSK);
- au_sync();
- val |= PSC_AC97CFG_DE_ENABLE;
- au_writel(val, PSC_AC97CFG);
- au_sync();
-
- /* Wait for Device ready.
- */
- do {
- val = au_readl(PSC_AC97STAT);
- au_sync();
- } while ((val & PSC_AC97STAT_DR) == 0);
-
- /* codec init */
- if (!ac97_probe_codec(s->codec))
- goto err_dev3;
-
- s->codec_base_caps = rdcodec(s->codec, AC97_RESET);
- s->codec_ext_caps = rdcodec(s->codec, AC97_EXTENDED_ID);
- pr_info("AC'97 Base/Extended ID = %04x/%04x",
- s->codec_base_caps, s->codec_ext_caps);
-
- if (!(s->codec_ext_caps & AC97_EXTID_VRA)) {
- /* codec does not support VRA
- */
- s->no_vra = 1;
- } else if (!vra) {
- /* Boot option says disable VRA
- */
- u16 ac97_extstat = rdcodec(s->codec, AC97_EXTENDED_STATUS);
- wrcodec(s->codec, AC97_EXTENDED_STATUS,
- ac97_extstat & ~AC97_EXTSTAT_VRA);
- s->no_vra = 1;
- }
- if (s->no_vra)
- pr_info("no VRA, interpolating and decimating");
-
- /* set mic to be the recording source */
- val = SOUND_MASK_MIC;
- mixdev_ioctl(s->codec, SOUND_MIXER_WRITE_RECSRC,
- (unsigned long) &val);
-
- return 0;
-
- err_dev3:
- unregister_sound_mixer(s->codec->dev_mixer);
- err_dev2:
- unregister_sound_dsp(s->dev_audio);
- err_dev1:
- au1xxx_dbdma_chan_free(s->dma_adc.dmanr);
- err_dma2:
- au1xxx_dbdma_chan_free(s->dma_dac.dmanr);
- err_dma1:
- release_mem_region(CPHYSADDR(AC97_PSC_SEL), 0x30);
-
- ac97_release_codec(s->codec);
- return -1;
-}
-
-static void __devinit
-au1550_remove(void)
-{
- struct au1550_state *s = &au1550_state;
-
- if (!s)
- return;
- synchronize_irq();
- au1xxx_dbdma_chan_free(s->dma_adc.dmanr);
- au1xxx_dbdma_chan_free(s->dma_dac.dmanr);
- release_mem_region(CPHYSADDR(AC97_PSC_SEL), 0x30);
- unregister_sound_dsp(s->dev_audio);
- unregister_sound_mixer(s->codec->dev_mixer);
- ac97_release_codec(s->codec);
-}
-
-static int __init
-init_au1550(void)
-{
- return au1550_probe();
-}
-
-static void __exit
-cleanup_au1550(void)
-{
- au1550_remove();
-}
-
-module_init(init_au1550);
-module_exit(cleanup_au1550);
-
-#ifndef MODULE
-
-static int __init
-au1550_setup(char *options)
-{
- char *this_opt;
-
- if (!options || !*options)
- return 0;
-
- while ((this_opt = strsep(&options, ","))) {
- if (!*this_opt)
- continue;
- if (!strncmp(this_opt, "vra", 3)) {
- vra = 1;
- }
- }
-
- return 1;
-}
-
-__setup("au1550_audio=", au1550_setup);
-
-#endif /* MODULE */
OpenPOWER on IntegriCloud