diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /sound/oss/Kconfig | |
download | op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip op-kernel-dev-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'sound/oss/Kconfig')
-rw-r--r-- | sound/oss/Kconfig | 1120 |
1 files changed, 1120 insertions, 0 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig new file mode 100644 index 0000000..d303c2e --- /dev/null +++ b/sound/oss/Kconfig @@ -0,0 +1,1120 @@ +# drivers/sound/Config.in +# +# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net> +# More hacking for modularisation. +# +# Prompt user for primary drivers. +config SOUND_BT878 + tristate "BT878 audio dma" + depends on SOUND_PRIME!=n && SOUND + ---help--- + Audio DMA support for bt878 based grabber boards. As you might have + already noticed, bt878 is listed with two functions in /proc/pci. + Function 0 does the video stuff (bt848 compatible), function 1 does + the same for audio data. This is a driver for the audio part of + the chip. If you say 'Y' here you get a oss-compatible dsp device + where you can record from. If you want just watch TV you probably + don't need this driver as most TV cards handle sound with a short + cable from the TV card to your sound card's line-in. + + To compile this driver as a module, choose M here: the module will + be called btaudio. + +config SOUND_CMPCI + tristate "C-Media PCI (CMI8338/8738)" + depends on SOUND_PRIME!=n && SOUND && PCI + help + Say Y or M if you have a PCI sound card using the CMI8338 + or the CMI8738 chipset. Data on these chips are available at + <http://www.cmedia.com.tw/>. + + A userspace utility to control some internal registers of these + chips is available at + <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>. + +config SOUND_CMPCI_FM + bool "Enable legacy FM" + depends on SOUND_CMPCI && X86 + help + Say Y here to enable the legacy FM (frequency-modulation) synthesizer + support on a card using the CMI8338 or CMI8378 chipset. Even it is + enabled, you need to set fmio as proper value to enable it. + Say N here if you don't need this. + +config SOUND_CMPCI_MIDI + bool "Enable legacy MPU-401" + depends on SOUND_CMPCI && X86 + help + Say Y here to enable the legacy MPU401 MIDI synthesizer support on a + card using the CMI8338 or CMI8378 chipset. Even it is enabled, + you need to set mpuio as proper value to enable it. + Say N here if you don't need this. + +config SOUND_CMPCI_JOYSTICK + bool "Enable joystick" + depends on SOUND_CMPCI && X86 + help + Say Y here in order to enable the joystick port on a sound card using + the CMI8338 or the CMI8738 chipset. You need to config the + gameport support and set joystick parameter as 1 to use it. + Say N here if you don't need this. + +config SOUND_EMU10K1 + tristate "Creative SBLive! (EMU10K1)" + depends on SOUND_PRIME!=n && SOUND && PCI + ---help--- + Say Y or M if you have a PCI sound card using the EMU10K1 chipset, + such as the Creative SBLive!, SB PCI512 or Emu-APS. + + For more information on this driver and the degree of support for + the different card models please check: + + <http://sourceforge.net/projects/emu10k1/> + + It is now possible to load dsp microcode patches into the EMU10K1 + chip. These patches are used to implement real time sound + processing effects which include for example: signal routing, + bass/treble control, AC3 passthrough, ... + Userspace tools to create new patches and load/unload them can be + found in the emu-tools package at the above URL. + +config MIDI_EMU10K1 + bool "Creative SBLive! MIDI (EXPERIMENTAL)" + depends on SOUND_EMU10K1 && EXPERIMENTAL + help + Say Y if you want to be able to use the OSS /dev/sequencer + interface. This code is still experimental. + +config SOUND_FUSION + tristate "Crystal SoundFusion (CS4280/461x)" + depends on SOUND_PRIME!=n && SOUND + help + This module drives the Crystal SoundFusion devices (CS4280/46xx + series) when wired as native sound drivers with AC97 codecs. If + this driver does not work try the CS4232 driver. + +config SOUND_CS4281 + tristate "Crystal Sound CS4281" + depends on SOUND_PRIME!=n && SOUND + help + Picture and feature list at + <http://www.pcbroker.com/crystal4281.html>. + +config SOUND_BCM_CS4297A + tristate "Crystal Sound CS4297a (for Swarm)" + depends on SOUND_PRIME!=n && SIBYTE_SWARM && SOUND + help + The BCM91250A has a Crystal CS4297a on synchronous serial + port B (in addition to the DB-9 serial port). Say Y or M + here to enable the sound chip instead of the UART. Also + note that CONFIG_KGDB should not be enabled at the same + time, since it also attempts to use this UART port. + +config SOUND_ES1370 + tristate "Ensoniq AudioPCI (ES1370)" + depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT + help + Say Y or M if you have a PCI sound card utilizing the Ensoniq + ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find + out if your sound card uses an ES1370 without removing your + computer's cover, use lspci -n and look for the PCI ID + 1274:5000. Since Ensoniq was bought by Creative Labs, + Sound Blaster 64/PCI models are either ES1370 or ES1371 based. + This driver differs slightly from OSS/Free, so PLEASE READ + <file:Documentation/sound/oss/es1370>. + +config SOUND_ES1371 + tristate "Creative Ensoniq AudioPCI 97 (ES1371)" + depends on SOUND_PRIME!=n && SOUND && PCI && SOUND_GAMEPORT + help + Say Y or M if you have a PCI sound card utilizing the Ensoniq + ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if + your sound card uses an ES1371 without removing your computer's + cover, use lspci -n and look for the PCI ID 1274:1371. Since + Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI + models are either ES1370 or ES1371 based. This driver differs + slightly from OSS/Free, so PLEASE READ + <file:Documentation/sound/oss/es1371>. + +config SOUND_ESSSOLO1 + tristate "ESS Technology Solo1" + depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT && PCI + help + Say Y or M if you have a PCI sound card utilizing the ESS Technology + Solo1 chip. To find out if your sound card uses a + Solo1 chip without removing your computer's cover, use + lspci -n and look for the PCI ID 125D:1969. This driver + differs slightly from OSS/Free, so PLEASE READ + <file:Documentation/sound/oss/solo1>. + +config SOUND_MAESTRO + tristate "ESS Maestro, Maestro2, Maestro2E driver" + depends on SOUND_PRIME!=n && SOUND && PCI + help + Say Y or M if you have a sound system driven by ESS's Maestro line + of PCI sound chips. These include the Maestro 1, Maestro 2, and + Maestro 2E. See <file:Documentation/sound/oss/Maestro> for more + details. + +config SOUND_MAESTRO3 + tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)" + depends on SOUND_PRIME!=n && SOUND && PCI && EXPERIMENTAL + help + Say Y or M if you have a sound system driven by ESS's Maestro 3 + PCI sound chip. + +config SOUND_ICH + tristate "Intel ICH (i8xx) audio support" + depends on SOUND_PRIME!=n && PCI + help + Support for integral audio in Intel's I/O Controller Hub (ICH) + chipset, as used on the 810/820/840 motherboards. + +config SOUND_HARMONY + tristate "PA Harmony audio driver" + depends on GSC_LASI && SOUND_PRIME!=n + help + Say 'Y' or 'M' to include support for Harmony soundchip + on HP 712, 715/new and many other GSC based machines. + +config SOUND_SONICVIBES + tristate "S3 SonicVibes" + depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT + help + Say Y or M if you have a PCI sound card utilizing the S3 + SonicVibes chipset. To find out if your sound card uses a + SonicVibes chip without removing your computer's cover, use + lspci -n and look for the PCI ID 5333:CA00. This driver + differs slightly from OSS/Free, so PLEASE READ + <file:Documentation/sound/oss/sonicvibes>. + +config SOUND_VWSND + tristate "SGI Visual Workstation Sound" + depends on SOUND_PRIME!=n && X86_VISWS && SOUND + help + Say Y or M if you have an SGI Visual Workstation and you want to be + able to use its on-board audio. Read + <file:Documentation/sound/oss/vwsnd> for more info on this driver's + capabilities. + +config SOUND_HAL2 + tristate "SGI HAL2 sound (EXPERIMENTAL)" + depends on SOUND_PRIME!=n && SOUND && SGI_IP22 && EXPERIMENTAL + help + Say Y or M if you have an SGI Indy system and want to be able to + use it's on-board A2 audio system. + +config SOUND_IT8172 + tristate "IT8172G Sound" + depends on SOUND_PRIME!=n && (MIPS_ITE8172 || MIPS_IVR) && SOUND + +config SOUND_VRC5477 + tristate "NEC Vrc5477 AC97 sound" + depends on SOUND_PRIME!=n && DDB5477 && SOUND + help + Say Y here to enable sound support for the NEC Vrc5477 chip, an + integrated, multi-function controller chip for MIPS CPUs. Works + with the AC97 codec. + +config SOUND_AU1000 + tristate "Au1000 Sound" + depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND + +config SOUND_AU1550_AC97 + tristate "Au1550 AC97 Sound" + depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND + +config SOUND_TRIDENT + tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" + depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT + ---help--- + Say Y or M if you have a PCI sound card utilizing the Trident + 4DWave-DX/NX chipset or your mother board chipset has SiS 7018 + or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded + in SiS960 Super South Bridge and SiS540/630 Single Chipset. + The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D, + M1535+ or M1535D+ South Bridge. + + Use lspci -n to find out if your sound card or chipset uses + Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands + for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID + 10B9:5451 stands for ALi5451. + + This driver supports S/PDIF in/out (record/playback) for ALi 5451 + embedded in ALi M1535+ and M1535D+. Note that they aren't all + enabled by default; you can enable them by saying Y to "/proc file + system support" and "Sysctl support", and after the /proc file + system has been mounted, executing the command + + command what is enabled + + echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default). + + echo 1>/proc/ALi5451 use S/PDIF out to output pcm data. + + echo 2>/proc/ALi5451 use S/PDIF out to output non-pcm data. + (AC3...). + + echo 3>/proc/ALi5451 record from Ac97 in(MIC, Line in...). + (Default). + + echo 4>/proc/ALi5451 no matter Ac97 settings, record from S/PDIF + in. + + + This driver differs slightly from OSS/Free, so PLEASE READ the + comments at the top of <file:drivers/sound/trident.c>. + +config SOUND_MSNDCLAS + tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" + depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE) + help + Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or + Monterey (not for the Pinnacle or Fiji). + + See <file:Documentation/sound/oss/MultiSound> for important information + about this driver. Note that it has been discontinued, but the + Voyetra Turtle Beach knowledge base entry for it is still available + at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. + +comment "Compiled-in MSND Classic support requires firmware during compilation." + depends on SOUND_PRIME && SOUND_MSNDCLAS=y + +config MSNDCLAS_HAVE_BOOT + bool + depends on SOUND_MSNDCLAS=y && !STANDALONE + default y + +config MSNDCLAS_INIT_FILE + string "Full pathname of MSNDINIT.BIN firmware file" + depends on SOUND_MSNDCLAS + default "/etc/sound/msndinit.bin" + help + The MultiSound cards have two firmware files which are required for + operation, and are not currently included. These files can be + obtained from Turtle Beach. See + <file:Documentation/sound/oss/MultiSound> for information on how to + obtain this. + +config MSNDCLAS_PERM_FILE + string "Full pathname of MSNDPERM.BIN firmware file" + depends on SOUND_MSNDCLAS + default "/etc/sound/msndperm.bin" + help + The MultiSound cards have two firmware files which are required for + operation, and are not currently included. These files can be + obtained from Turtle Beach. See + <file:Documentation/sound/oss/MultiSound> for information on how to + obtain this. + +config MSNDCLAS_IRQ + int "MSND Classic IRQ 5, 7, 9, 10, 11, 12" + depends on SOUND_MSNDCLAS=y + default "5" + help + Interrupt Request line for the MultiSound Classic and related cards. + +config MSNDCLAS_MEM + hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000" + depends on SOUND_MSNDCLAS=y + default "D0000" + help + Memory-mapped I/O base address for the MultiSound Classic and + related cards. + +config MSNDCLAS_IO + hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0" + depends on SOUND_MSNDCLAS=y + default "290" + help + I/O port address for the MultiSound Classic and related cards. + +config SOUND_MSNDPIN + tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji" + depends on SOUND_PRIME!=n && SOUND && (m || !STANDALONE) + help + Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji. + See <file:Documentation/sound/oss/MultiSound> for important information + about this driver. Note that it has been discontinued, but the + Voyetra Turtle Beach knowledge base entry for it is still available + at <http://www.turtlebeach.com/site/kb_ftp/600.asp>. + +comment "Compiled-in MSND Pinnacle support requires firmware during compilation." + depends on SOUND_PRIME && SOUND_MSNDPIN=y + +config MSNDPIN_HAVE_BOOT + bool + depends on SOUND_MSNDPIN=y + default y + +config MSNDPIN_INIT_FILE + string "Full pathname of PNDSPINI.BIN firmware file" + depends on SOUND_MSNDPIN + default "/etc/sound/pndspini.bin" + help + The MultiSound cards have two firmware files which are required + for operation, and are not currently included. These files can be + obtained from Turtle Beach. See + <file:Documentation/sound/oss/MultiSound> for information on how to + obtain this. + +config MSNDPIN_PERM_FILE + string "Full pathname of PNDSPERM.BIN firmware file" + depends on SOUND_MSNDPIN + default "/etc/sound/pndsperm.bin" + help + The MultiSound cards have two firmware files which are required for + operation, and are not currently included. These files can be + obtained from Turtle Beach. See + <file:Documentation/sound/oss/MultiSound> for information on how to + obtain this. + +config MSNDPIN_IRQ + int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12" + depends on SOUND_MSNDPIN=y + default "5" + help + Interrupt request line for the primary synthesizer on MultiSound + Pinnacle and Fiji sound cards. + +config MSNDPIN_MEM + hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000" + depends on SOUND_MSNDPIN=y + default "D0000" + help + Memory-mapped I/O base address for the primary synthesizer on + MultiSound Pinnacle and Fiji sound cards. + +config MSNDPIN_IO + hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0" + depends on SOUND_MSNDPIN=y + default "290" + help + Memory-mapped I/O base address for the primary synthesizer on + MultiSound Pinnacle and Fiji sound cards. + +config MSNDPIN_DIGITAL + bool "MSND Pinnacle has S/PDIF I/O" + depends on SOUND_MSNDPIN=y + help + If you have the S/PDIF daughter board for the Pinnacle or Fiji, + answer Y here; otherwise, say N. If you have this, you will be able + to play and record from the S/PDIF port (digital signal). See + <file:Documentation/sound/oss/MultiSound> for information on how to make + use of this capability. + +config MSNDPIN_NONPNP + bool "MSND Pinnacle non-PnP Mode" + depends on SOUND_MSNDPIN=y + help + The Pinnacle and Fiji card resources can be configured either with + PnP, or through a configuration port. Say Y here if your card is NOT + in PnP mode. For the Pinnacle, configuration in non-PnP mode allows + use of the IDE and joystick peripherals on the card as well; these + do not show up when the card is in PnP mode. Specifying zero for any + resource of a device will disable the device. If you are running the + card in PnP mode, you must say N here and use isapnptools to + configure the card's resources. + +comment "MSND Pinnacle DSP section will be configured to above parameters." + depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP + +config MSNDPIN_CFG + hex "MSND Pinnacle config port 250,260,270" + depends on MSNDPIN_NONPNP + default "250" + help + This is the port which the Pinnacle and Fiji uses to configure the + card's resources when not in PnP mode. If your card is in PnP mode, + then be sure to say N to the previous option, "MSND Pinnacle Non-PnP + Mode". + +comment "Pinnacle-specific Device Configuration (0 disables)" + depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP + +config MSNDPIN_MPU_IO + hex "MSND Pinnacle MPU I/O (e.g. 330)" + depends on MSNDPIN_NONPNP + default "0" + help + Memory-mapped I/O base address for the Kurzweil daughterboard + synthesizer on MultiSound Pinnacle and Fiji sound cards. + +config MSNDPIN_MPU_IRQ + int "MSND Pinnacle MPU IRQ (e.g. 9)" + depends on MSNDPIN_NONPNP + default "0" + help + Interrupt request number for the Kurzweil daughterboard + synthesizer on MultiSound Pinnacle and Fiji sound cards. + +config MSNDPIN_IDE_IO0 + hex "MSND Pinnacle IDE I/O 0 (e.g. 170)" + depends on MSNDPIN_NONPNP + default "0" + help + CD-ROM drive 0 memory-mapped I/O base address for the MultiSound + Pinnacle and Fiji sound cards. + +config MSNDPIN_IDE_IO1 + hex "MSND Pinnacle IDE I/O 1 (e.g. 376)" + depends on MSNDPIN_NONPNP + default "0" + help + CD-ROM drive 1 memory-mapped I/O base address for the MultiSound + Pinnacle and Fiji sound cards. + +config MSNDPIN_IDE_IRQ + int "MSND Pinnacle IDE IRQ (e.g. 15)" + depends on MSNDPIN_NONPNP + default "0" + help + Interrupt request number for the IDE CD-ROM interface on the + MultiSound Pinnacle and Fiji sound cards. + +config MSNDPIN_JOYSTICK_IO + hex "MSND Pinnacle joystick I/O (e.g. 200)" + depends on MSNDPIN_NONPNP + default "0" + help + Memory-mapped I/O base address for the joystick port on MultiSound + Pinnacle and Fiji sound cards. + +config MSND_FIFOSIZE + int "MSND buffer size (kB)" + depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y) + default "128" + help + Configures the size of each audio buffer, in kilobytes, for + recording and playing in the MultiSound drivers (both the Classic + and Pinnacle). Larger values reduce the chance of data overruns at + the expense of overall latency. If unsure, use the default. + +config SOUND_VIA82CXXX + tristate "VIA 82C686 Audio Codec" + depends on SOUND_PRIME!=n && PCI + help + Say Y here to include support for the audio codec found on VIA + 82Cxxx-based chips. Typically these are built into a motherboard. + + DO NOT select Sound Blaster or Adlib with this driver, unless + you have a Sound Blaster or Adlib card in addition to your VIA + audio chip. + +config MIDI_VIA82CXXX + bool "VIA 82C686 MIDI" + depends on SOUND_VIA82CXXX + help + Answer Y to use the MIDI interface of the Via686. You may need to + enable this in the BIOS before it will work. This is for connection + to external MIDI hardware, and is not required for software playback + of MIDI files. + +config SOUND_OSS + tristate "OSS sound modules" + depends on SOUND_PRIME!=n && SOUND + help + OSS is the Open Sound System suite of sound card drivers. They make + sound programming easier since they provide a common API. Say Y or + M here (the module will be called sound) if you haven't found a + driver for your sound card above, then pick your driver from the + list below. + +config SOUND_TRACEINIT + bool "Verbose initialisation" + depends on SOUND_OSS + help + Verbose soundcard initialization -- affects the format of autoprobe + and initialization messages at boot time. + +config SOUND_DMAP + bool "Persistent DMA buffers" + depends on SOUND_OSS + ---help--- + Linux can often have problems allocating DMA buffers for ISA sound + cards on machines with more than 16MB of RAM. This is because ISA + DMA buffers must exist below the 16MB boundary and it is quite + possible that a large enough free block in this region cannot be + found after the machine has been running for a while. If you say Y + here the DMA buffers (64Kb) will be allocated at boot time and kept + until the shutdown. This option is only useful if you said Y to + "OSS sound modules", above. If you said M to "OSS sound modules" + then you can get the persistent DMA buffer functionality by passing + the command-line argument "dmabuf=1" to the sound module. + + Say Y unless you have 16MB or more RAM or a PCI sound card. + +config SOUND_AD1816 + tristate "AD1816(A) based cards (EXPERIMENTAL)" + depends on EXPERIMENTAL && SOUND_OSS + help + Say M here if you have a sound card based on the Analog Devices + AD1816(A) chip. + + If you compile the driver into the kernel, you have to add + "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line. + +config SOUND_AD1889 + tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)" + depends on EXPERIMENTAL && SOUND_OSS + help + Say M here if you have a sound card based on the Analog Devices + AD1889 chip. + +config SOUND_SGALAXY + tristate "Aztech Sound Galaxy (non-PnP) cards" + depends on SOUND_OSS + help + This module initializes the older non Plug and Play sound galaxy + cards from Aztech. It supports the Waverider Pro 32 - 3D and the + Galaxy Washington 16. + + If you compile the driver into the kernel, you have to add + "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command + line. + +config SOUND_ADLIB + tristate "Adlib Cards" + depends on SOUND_OSS + help + Includes ASB 64 4D. Information on programming AdLib cards is + available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>. + +config SOUND_ACI_MIXER + tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)" + depends on SOUND_OSS + ---help--- + ACI (Audio Command Interface) is a protocol used to communicate with + the microcontroller on some sound cards produced by miro and + Cardinal Technologies. The main function of the ACI is to control + the mixer and to get a product identification. + + This VoxWare ACI driver currently supports the ACI functions on the + miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI + also controls the radio tuner. This is supported in the video4linux + miropcm20 driver (say M or Y here and go back to "Multimedia + devices" -> "Radio Adapters"). + + This driver is also available as a module and will be called aci. + +config SOUND_CS4232 + tristate "Crystal CS4232 based (PnP) cards" + depends on SOUND_OSS + help + Say Y here if you have a card based on the Crystal CS4232 chip set, + which uses its own Plug and Play protocol. + + If you compile the driver into the kernel, you have to add + "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel + command line. + + See <file:Documentation/sound/oss/CS4232> for more information on + configuring this card. + +config SOUND_SSCAPE + tristate "Ensoniq SoundScape support" + depends on SOUND_OSS + help + Answer Y if you have a sound card based on the Ensoniq SoundScape + chipset. Such cards are being manufactured at least by Ensoniq, Spea + and Reveal (Reveal makes also other cards). + + If you compile the driver into the kernel, you have to add + "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command + line. + +config SOUND_GUS + tristate "Gravis Ultrasound support" + depends on SOUND_OSS + help + Say Y here for any type of Gravis Ultrasound card, including the GUS + or GUS MAX. See also <file:Documentation/sound/oss/ultrasound> for more + information on configuring this card with modules. + + If you compile the driver into the kernel, you have to add + "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line. + +config SOUND_GUS16 + bool "16 bit sampling option of GUS (_NOT_ GUS MAX)" + depends on SOUND_GUS + help + Support for Gravis Ulstrasound (GUS) cards (other than the GUS), + sampling at 16-bit width. + +config SOUND_GUSMAX + bool "GUS MAX support" + depends on SOUND_GUS + help + Support for Gravis Ulstrasound MAX. + +config SOUND_VMIDI + tristate "Loopback MIDI device support" + depends on SOUND_OSS + help + Support for MIDI loopback on port 1 or 2. + +config SOUND_TRIX + tristate "MediaTrix AudioTrix Pro support" + depends on SOUND_OSS + help + Answer Y if you have the AudioTriX Pro sound card manufactured + by MediaTrix. + +config TRIX_HAVE_BOOT + bool "Have TRXPRO.HEX firmware file" + depends on SOUND_TRIX=y && !STANDALONE + help + The MediaTrix AudioTrix Pro has an on-board microcontroller which + needs to be initialized by downloading the code from the file + TRXPRO.HEX in the DOS driver directory. If you don't have the + TRXPRO.HEX file handy you may skip this step. However, the SB and + MPU-401 modes of AudioTrix Pro will not work without this file! + +config TRIX_BOOT_FILE + string "Full pathname of TRXPRO.HEX firmware file" + depends on TRIX_HAVE_BOOT + default "/etc/sound/trxpro.hex" + help + Enter the full pathname of your TRXPRO.HEX file, starting from /. + +config SOUND_MSS + tristate "Microsoft Sound System support" + depends on SOUND_OSS + ---help--- + Again think carefully before answering Y to this question. It's + safe to answer Y if you have the original Windows Sound System card + made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may + say Y in case your card is NOT among these: + + ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16, + Ensoniq SoundScape (and compatibles made by Reveal and Spea), + Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max, + Gravis Ultrasound with 16 bit option, Logitech Sound Man 16, + Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi + 82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft + Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid + SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro + Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface, + Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound + Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M + notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM + synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface. + + For cards having native support in VoxWare, consult the card + specific instructions in <file:Documentation/sound/oss/README.OSS>. + Some drivers have their own MSS support and saying Y to this option + will cause a conflict. + + If you compile the driver into the kernel, you have to add + "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command + line. + +config SOUND_MPU401 + tristate "MPU-401 support (NOT for SB16)" + depends on SOUND_OSS + ---help--- + Be careful with this question. The MPU401 interface is supported by + all sound cards. However, some natively supported cards have their + own driver for MPU401. Enabling this MPU401 option with these cards + will cause a conflict. Also, enabling MPU401 on a system that + doesn't really have a MPU401 could cause some trouble. If your card + was in the list of supported cards, look at the card specific + instructions in the <file:Documentation/sound/oss/README.OSS> file. It + is safe to answer Y if you have a true MPU401 MIDI interface card. + + If you compile the driver into the kernel, you have to add + "mpu401=<io>,<irq>" to the kernel command line. + +config SOUND_NM256 + tristate "NM256AV/NM256ZX audio support" + depends on SOUND_OSS + help + Say M here to include audio support for the NeoMagic 256AV/256ZX + chipsets. These are the audio chipsets found in the Sony + Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt + laptops. It includes support for an AC97-compatible mixer and an + apparently proprietary sound engine. + + See <file:Documentation/sound/oss/NM256> for further information. + +config SOUND_MAD16 + tristate "OPTi MAD16 and/or Mozart based cards" + depends on SOUND_OSS && SOUND_GAMEPORT + ---help--- + Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi + 82C928 or 82C929 or 82C931) audio interface chip. These chips are + quite common so it's possible that many no-name cards have one of + them. In addition the MAD16 chip is used in some cards made by known + manufacturers such as Turtle Beach (Tropez), Reveal (some models) + and Diamond (latest ones). Note however that the Tropez sound cards + have their own driver; if you have one of those, say N here and Y or + M to "Full support for Turtle Beach WaveFront", below. + + If you compile the driver into the kernel, you have to add + "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the + kernel command line. + + See also <file:Documentation/sound/oss/Opti> and + <file:Documentation/sound/oss/MAD16> for more information on setting + these cards up as modules. + +config MAD16_OLDCARD + bool "Support MIDI in older MAD16 based cards (requires SB)" + depends on SOUND_MAD16 + help + Answer Y (or M) if you have an older card based on the C928 or + Mozart chipset and you want to have MIDI support. If you enable this + option you also need to enable support for Sound Blaster. + +config SOUND_PAS + tristate "ProAudioSpectrum 16 support" + depends on SOUND_OSS + ---help--- + Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio + 16 or Logitech SoundMan 16 sound card. Answer N if you have some + other card made by Media Vision or Logitech since those are not + PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>. + It is not necessary to add Sound Blaster support separately; it + is included in PAS support. + + If you compile the driver into the kernel, you have to add + "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2> + to the kernel command line. + +config PAS_JOYSTICK + bool "Enable PAS16 joystick port" + depends on SOUND_PAS=y + help + Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick + port. + +config SOUND_PSS + tristate "PSS (AD1848, ADSP-2115, ESC614) support" + depends on SOUND_OSS + help + Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven + ADSP-16 or some other card based on the PSS chipset (AD1848 codec + + ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on + how to compile it into the kernel or as a module see the file + <file:Documentation/sound/oss/PSS>. + + If you compile the driver into the kernel, you have to add + "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel + command line. + +config PSS_MIXER + bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)" + depends on SOUND_PSS + help + Answer Y for Beethoven ADSP-16. You may try to say Y also for other + cards if they have master volume, bass, treble, and you can't + control it under Linux. If you answer N for Beethoven ADSP-16, you + can't control master volume, bass, treble and synth volume. + + If you said M to "PSS support" above, you may enable or disable this + PSS mixer with the module parameter pss_mixer. For more information + see the file <file:Documentation/sound/oss/PSS>. + +config PSS_HAVE_BOOT + bool "Have DSPxxx.LD firmware file" + depends on SOUND_PSS && !STANDALONE + help + If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y + to include this file. Without this file the synth device (OPL) may + not work. + +config PSS_BOOT_FILE + string "Full pathname of DSPxxx.LD firmware file" + depends on PSS_HAVE_BOOT + default "/etc/sound/dsp001.ld" + help + Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file, + starting from /. + +config SOUND_SB + tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" + depends on SOUND_OSS + ---help--- + Answer Y if you have an original Sound Blaster card made by Creative + Labs or a 100% hardware compatible clone (like the Thunderboard or + SM Games). For an unknown card you may answer Y if the card claims + to be Sound Blaster-compatible. + + Please read the file <file:Documentation/sound/oss/Soundblaster>. + + You should also say Y here for cards based on the Avance Logic + ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and + for cards based on ESS chips (read + <file:Documentation/sound/oss/ESS1868> and + <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE + 64, say Y here and also to "AWE32 synth" below and read + <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave + card, say Y here and read <file:Documentation/sound/oss/mwave>. + + If you compile the driver into the kernel and don't want to use + isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel + command line. + + You can say M here to compile this driver as a module; the module is + called sb. + +config SOUND_AWE32_SYNTH + tristate "AWE32 synth" + depends on SOUND_OSS + help + Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or + similar sound card. See <file:Documentation/sound/oss/README.awe>, + <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE + mini-HOWTO, available from <http://www.tldp.org/docs.html#howto> + for more info. + +config SOUND_WAVEFRONT + tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards" + depends on SOUND_OSS && m + help + Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card + and read the files <file:Documentation/sound/oss/Wavefront> and + <file:Documentation/sound/oss/Tropez+>. + +config SOUND_MAUI + tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers" + depends on SOUND_OSS + help + Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez + sound card. + + If you compile the driver into the kernel, you have to add + "maui=<io>,<irq>" to the kernel command line. + +config MAUI_HAVE_BOOT + bool "Have OSWF.MOT firmware file" + depends on SOUND_MAUI=y && !STANDALONE + help + Turtle Beach Maui and Tropez sound cards have a microcontroller + which needs to be initialized prior to use. OSWF.MOT is a file + distributed with the card's DOS/Windows drivers. Answer Y if you + have this file. + +config MAUI_BOOT_FILE + string "Full pathname of OSWF.MOT firmware file" + depends on MAUI_HAVE_BOOT + default "/etc/sound/oswf.mot" + help + Enter the full pathname of your OSWF.MOT file, starting from /. + +config SOUND_YM3812 + tristate "Yamaha FM synthesizer (YM3812/OPL-3) support" + depends on SOUND_OSS + ---help--- + Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). + Answering Y is usually a safe and recommended choice, however some + cards may have software (TSR) FM emulation. Enabling FM support with + these cards may cause trouble (I don't currently know of any such + cards, however). Please read the file + <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip. + + If you compile the driver into the kernel, you have to add + "opl3=<io>" to the kernel command line. + + If unsure, say Y. + +config SOUND_OPL3SA1 + tristate "Yamaha OPL3-SA1 audio controller" + depends on SOUND_OSS + help + Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is + usually built into motherboards. Read + <file:Documentation/sound/oss/OPL3-SA> for details. + + If you compile the driver into the kernel, you have to add + "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel + command line. + +config SOUND_OPL3SA2 + tristate "Yamaha OPL3-SA2 and SA3 based PnP cards" + depends on SOUND_OSS + help + Say Y or M if you have a card based on one of these Yamaha sound + chipsets or the "SAx", which is actually a SA3. Read + <file:Documentation/sound/oss/OPL3-SA2> for more information on + configuring these cards. + + If you compile the driver into the kernel and do not also + configure in the optional ISA PnP support, you will have to add + "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel + command line. + +config SOUND_YMFPCI + tristate "Yamaha YMF7xx PCI audio (native mode)" + depends on SOUND_OSS && PCI + help + Support for Yamaha cards including the YMF711, YMF715, YMF718, + YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital. + +config SOUND_YMFPCI_LEGACY + bool "Yamaha PCI legacy ports support" + depends on SOUND_YMFPCI + help + Support for YMF7xx PCI cards emulating an MP401. + +config SOUND_UART6850 + tristate "6850 UART support" + depends on SOUND_OSS + help + This option enables support for MIDI interfaces based on the 6850 + UART chip. This interface is rarely found on sound cards. It's safe + to answer N to this question. + + If you compile the driver into the kernel, you have to add + "uart6850=<io>,<irq>" to the kernel command line. + +config SOUND_AEDSP16 + tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)" + depends on SOUND_OSS + ---help--- + Answer Y if you have a Gallant's Audio Excel DSP 16 card. This + driver supports Audio Excel DSP 16 but not the III nor PnP versions + of this card. + + The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or + a Microsoft Sound System card, so you should have said Y to either + "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" + or "Microsoft Sound System support", above, and you need to answer + the "MSS emulation" and "SBPro emulation" questions below + accordingly. You should say Y to one and only one of these two + questions. + + Read the <file:Documentation/sound/oss/README.OSS> file and the head of + <file:drivers/sound/aedsp16.c> as well as + <file:Documentation/sound/oss/AudioExcelDSP16> to get more information + about this driver and its configuration. + +config SC6600 + bool "SC-6600 based audio cards (new Audio Excel DSP 16)" + depends on SOUND_AEDSP16 + help + The SC6600 is the new version of DSP mounted on the Audio Excel DSP + 16 cards. Find in the manual the FCC ID of your audio card and + answer Y if you have an SC6600 DSP. + +config SC6600_JOY + bool "Activate SC-6600 Joystick Interface" + depends on SC6600 + help + Say Y here in order to use the joystick interface of the Audio Excel + DSP 16 card. + +config SC6600_CDROM + int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)" + depends on SC6600 + default "4" + help + This is used to activate the CD-ROM interface of the Audio Excel + DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no + CD-ROM present. + +config SC6600_CDROMBASE + hex "SC-6600 CDROM Interface I/O Address" + depends on SC6600 + default "0" + help + Base I/O port address for the CD-ROM interface of the Audio Excel + DSP 16 card. + +choice + prompt "Audio Excel DSP 16" + optional + depends on SOUND_AEDSP16 + +config AEDSP16_MSS + bool "MSS emulation" + depends on SOUND_MSS + help + Answer Y if you want your audio card to emulate Microsoft Sound + System. You should then say Y to "Microsoft Sound System support" + and say N to "Audio Excel DSP 16 (SBPro emulation)". + +config AEDSP16_SBPRO + bool "SBPro emulation" + depends on SOUND_SB + help + Answer Y if you want your audio card to emulate Sound Blaster Pro. + You should then say Y to "100% Sound Blaster compatibles + (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS + emulation)". + + If you compile the driver into the kernel, you have to add + "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel + command line. + +endchoice + +config AEDSP16_MPU401 + bool "Audio Excel DSP 16 (MPU401 emulation)" + depends on SOUND_AEDSP16 && SOUND_MPU401 + help + Answer Y if you want your audio card to emulate the MPU-401 midi + interface. You should then also say Y to "MPU-401 support". + + Note that the I/O base for MPU-401 support of aedsp16 is the same + you have selected for "MPU-401 support". If you are using this + driver as a module you have to specify the MPU I/O base address with + the parameter 'mpu_base=0xNNN'. + +config SOUND_VIDC + tristate "VIDC 16-bit sound" + depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS + help + 16-bit support for the VIDC onboard sound hardware found on Acorn + machines. + +config SOUND_WAVEARTIST + tristate "Netwinder WaveArtist" + depends on ARM && SOUND_OSS && ARCH_NETWINDER + help + Say Y here to include support for the Rockwell WaveArtist sound + system. This driver is mainly for the NetWinder. + +config SOUND_TVMIXER + tristate "TV card (bt848) mixer support" + depends on SOUND_PRIME!=n && SOUND && I2C + help + Support for audio mixer facilities on the BT848 TV frame-grabber + card. + +config SOUND_KAHLUA + tristate "XpressAudio Sound Blaster emulation" + depends on SOUND_SB + +config SOUND_ALI5455 + tristate "ALi5455 audio support" + depends on SOUND_PRIME!=n && PCI + +config SOUND_FORTE + tristate "ForteMedia FM801 driver" + depends on SOUND_PRIME!=n && PCI + help + Say Y or M if you want driver support for the ForteMedia FM801 PCI + audio controller (Abit AU10, Genius Sound Maker, HP Workstation + zx2000, and others). + +config SOUND_RME96XX + tristate "RME Hammerfall (RME96XX) support" + depends on SOUND_PRIME!=n && PCI + help + Say Y or M if you have a Hammerfall or Hammerfall light + multichannel card from RME. If you want to access advanced + features of the card, read <file:Documentation/sound/oss/rme96xx>. + +config SOUND_AD1980 + tristate "AD1980 front/back switch plugin" + depends on SOUND_PRIME!=n + +config SOUND_SH_DAC_AUDIO + tristate "SuperH DAC audio support" + depends on SOUND_PRIME!=n && SOUND && CPU_SH3 + +config SOUND_SH_DAC_AUDIO_CHANNEL + int " DAC channel" + default "1" + depends on SOUND_SH_DAC_AUDIO |