ALSA: wss_lib: use wss detection code instead of ad1848 one

Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.

This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.

I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)

Sound playback and recording works on all these cards.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

1 files changed, 0 insertions, 487 deletions

diff --git a/sound/isa/ad1848/ad1848_lib.c b/sound/isa/ad1848/ad1848_lib.c
index aa803d3..e69de29 100644
--- a/sound/isa/ad1848/ad1848_lib.c
+++ b/sound/isa/ad1848/ad1848_lib.c
@@ -1,487 +0,0 @@
-/*
- *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
- *  Routines for control of AD1848/AD1847/CS4248
- *
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- *
- */
-
-#define SNDRV_MAIN_OBJECT_FILE
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <sound/core.h>
-#include <sound/ad1848.h>
-#include <sound/control.h>
-#include <sound/tlv.h>
-#include <sound/pcm_params.h>
-
-#include <asm/io.h>
-#include <asm/dma.h>
-
-MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
-MODULE_DESCRIPTION("Routines for control of AD1848/AD1847/CS4248");
-MODULE_LICENSE("GPL");
-
-#if 0
-#define SNDRV_DEBUG_MCE
-#endif
-
-/*
- *  Some variables
- */
-
-static unsigned char snd_ad1848_original_image[16] =
-{
-	0x00,			/* 00 - lic */
-	0x00,			/* 01 - ric */
-	0x9f,			/* 02 - la1ic */
-	0x9f,			/* 03 - ra1ic */
-	0x9f,			/* 04 - la2ic */
-	0x9f,			/* 05 - ra2ic */
-	0xbf,			/* 06 - loc */
-	0xbf,			/* 07 - roc */
-	0x20,			/* 08 - dfr */
-	AD1848_AUTOCALIB,	/* 09 - ic */
-	0x00,			/* 0a - pc */
-	0x00,			/* 0b - ti */
-	0x00,			/* 0c - mi */
-	0x00,			/* 0d - lbc */
-	0x00,			/* 0e - dru */
-	0x00,			/* 0f - drl */
-};
-
-/*
- *  Basic I/O functions
- */
-
-static void snd_ad1848_wait(struct snd_wss *chip)
-{
-	int timeout;
-
-	for (timeout = 250; timeout > 0; timeout--) {
-		if ((inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT) == 0)
-			break;
-		udelay(100);
-	}
-}
-
-void snd_ad1848_out(struct snd_wss *chip,
-			   unsigned char reg,
-			   unsigned char value)
-{
-	snd_ad1848_wait(chip);
-#ifdef CONFIG_SND_DEBUG
-	if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
-		snd_printk(KERN_WARNING "auto calibration time out - "
-			   "reg = 0x%x, value = 0x%x\n", reg, value);
-#endif
-	outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL));
-	outb(chip->image[reg] = value, chip->port + CS4231P(REG));
-	mb();
-	snd_printdd("codec out - reg 0x%x = 0x%x\n",
-			chip->mce_bit | reg, value);
-}
-
-EXPORT_SYMBOL(snd_ad1848_out);
-
-static unsigned char snd_ad1848_in(struct snd_wss *chip, unsigned char reg)
-{
-	snd_ad1848_wait(chip);
-#ifdef CONFIG_SND_DEBUG
-	if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
-		snd_printk(KERN_WARNING "auto calibration time out - "
-			   "reg = 0x%x\n", reg);
-#endif
-	outb(chip->mce_bit | reg, chip->port + CS4231P(REGSEL));
-	mb();
-	return inb(chip->port + CS4231P(REG));
-}
-
-#if 0
-
-static void snd_ad1848_debug(struct snd_wss *chip)
-{
-	printk(KERN_DEBUG "AD1848 REGS:      INDEX = 0x%02x  ", inb(chip->port + CS4231P(REGSEL)));
-	printk(KERN_DEBUG "                 STATUS = 0x%02x\n", inb(chip->port + CS4231P(STATUS)));
-	printk(KERN_DEBUG "  0x00: left input      = 0x%02x  ", snd_ad1848_in(chip, 0x00));
-	printk(KERN_DEBUG "  0x08: playback format = 0x%02x\n", snd_ad1848_in(chip, 0x08));
-	printk(KERN_DEBUG "  0x01: right input     = 0x%02x  ", snd_ad1848_in(chip, 0x01));
-	printk(KERN_DEBUG "  0x09: iface (CFIG 1)  = 0x%02x\n", snd_ad1848_in(chip, 0x09));
-	printk(KERN_DEBUG "  0x02: AUXA left       = 0x%02x  ", snd_ad1848_in(chip, 0x02));
-	printk(KERN_DEBUG "  0x0a: pin control     = 0x%02x\n", snd_ad1848_in(chip, 0x0a));
-	printk(KERN_DEBUG "  0x03: AUXA right      = 0x%02x  ", snd_ad1848_in(chip, 0x03));
-	printk(KERN_DEBUG "  0x0b: init & status   = 0x%02x\n", snd_ad1848_in(chip, 0x0b));
-	printk(KERN_DEBUG "  0x04: AUXB left       = 0x%02x  ", snd_ad1848_in(chip, 0x04));
-	printk(KERN_DEBUG "  0x0c: revision & mode = 0x%02x\n", snd_ad1848_in(chip, 0x0c));
-	printk(KERN_DEBUG "  0x05: AUXB right      = 0x%02x  ", snd_ad1848_in(chip, 0x05));
-	printk(KERN_DEBUG "  0x0d: loopback        = 0x%02x\n", snd_ad1848_in(chip, 0x0d));
-	printk(KERN_DEBUG "  0x06: left output     = 0x%02x  ", snd_ad1848_in(chip, 0x06));
-	printk(KERN_DEBUG "  0x0e: data upr count  = 0x%02x\n", snd_ad1848_in(chip, 0x0e));
-	printk(KERN_DEBUG "  0x07: right output    = 0x%02x  ", snd_ad1848_in(chip, 0x07));
-	printk(KERN_DEBUG "  0x0f: data lwr count  = 0x%02x\n", snd_ad1848_in(chip, 0x0f));
-}
-
-#endif
-
-/*
- *  AD1848 detection / MCE routines
- */
-
-static void snd_ad1848_mce_up(struct snd_wss *chip)
-{
-	unsigned long flags;
-	int timeout;
-
-	snd_ad1848_wait(chip);
-#ifdef CONFIG_SND_DEBUG
-	if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
-		snd_printk(KERN_WARNING "mce_up - auto calibration time out (0)\n");
-#endif
-	spin_lock_irqsave(&chip->reg_lock, flags);
-	chip->mce_bit |= AD1848_MCE;
-	timeout = inb(chip->port + CS4231P(REGSEL));
-	if (timeout == 0x80)
-		snd_printk(KERN_WARNING "mce_up [0x%lx]: serious init problem - codec still busy\n", chip->port);
-	if (!(timeout & AD1848_MCE))
-		outb(chip->mce_bit | (timeout & 0x1f),
-		     chip->port + CS4231P(REGSEL));
-	spin_unlock_irqrestore(&chip->reg_lock, flags);
-}
-
-static void snd_ad1848_mce_down(struct snd_wss *chip)
-{
-	unsigned long flags, timeout;
-	int reg;
-
-	spin_lock_irqsave(&chip->reg_lock, flags);
-	for (timeout = 5; timeout > 0; timeout--)
-		inb(chip->port + CS4231P(REGSEL));
-	/* end of cleanup sequence */
-	for (timeout = 12000;
-	     timeout > 0 && (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT);
-	     timeout--)
-		udelay(100);
-
-	snd_printdd("(1) timeout = %ld\n", timeout);
-
-#ifdef CONFIG_SND_DEBUG
-	if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
-		snd_printk(KERN_WARNING
-			   "mce_down [0x%lx] - auto calibration time out (0)\n",
-			   chip->port + CS4231P(REGSEL));
-#endif
-
-	chip->mce_bit &= ~AD1848_MCE;
-	reg = inb(chip->port + CS4231P(REGSEL));
-	outb(chip->mce_bit | (reg & 0x1f), chip->port + CS4231P(REGSEL));
-	if (reg == 0x80)
-		snd_printk(KERN_WARNING "mce_down [0x%lx]: serious init problem - codec still busy\n", chip->port);
-	if ((reg & AD1848_MCE) == 0) {
-		spin_unlock_irqrestore(&chip->reg_lock, flags);
-		return;
-	}
-
-	/*
-	 * Wait for auto-calibration (AC) process to finish, i.e. ACI to go low.
-	 * It may take up to 5 sample periods (at most 907 us @ 5.5125 kHz) for
-	 * the process to _start_, so it is important to wait at least that long
-	 * before checking.  Otherwise we might think AC has finished when it
-	 * has in fact not begun.  It could take 128 (no AC) or 384 (AC) cycles
-	 * for ACI to drop.  This gives a wait of at most 70 ms with a more
-	 * typical value of 3-9 ms.
-	 */
-	timeout = jiffies + msecs_to_jiffies(250);
-	do {
-		spin_unlock_irqrestore(&chip->reg_lock, flags);
-		msleep(1);
-		spin_lock_irqsave(&chip->reg_lock, flags);
-		reg = snd_ad1848_in(chip, AD1848_TEST_INIT) &
-		      AD1848_CALIB_IN_PROGRESS;
-	} while (reg && time_before(jiffies, timeout));
-	spin_unlock_irqrestore(&chip->reg_lock, flags);
-	if (reg)
-		snd_printk(KERN_ERR
-			   "mce_down - auto calibration time out (2)\n");
-
-	snd_printdd("(4) jiffies = %lu\n", jiffies);
-	snd_printd("mce_down - exit = 0x%x\n",
-		   inb(chip->port + CS4231P(REGSEL)));
-}
-
-static irqreturn_t snd_ad1848_interrupt(int irq, void *dev_id)
-{
-	struct snd_wss *chip = dev_id;
-
-	if ((chip->mode & WSS_MODE_PLAY) && chip->playback_substream)
-		snd_pcm_period_elapsed(chip->playback_substream);
-	if ((chip->mode & WSS_MODE_RECORD) && chip->capture_substream)
-		snd_pcm_period_elapsed(chip->capture_substream);
-	outb(0, chip->port + CS4231P(STATUS));	/* clear global interrupt bit */
-	return IRQ_HANDLED;
-}
-
-/*
-
- */
-
-static void snd_ad1848_thinkpad_twiddle(struct snd_wss *chip, int on)
-{
-	int tmp;
-
-	if (!chip->thinkpad_flag) return;
-
-	outb(0x1c, AD1848_THINKPAD_CTL_PORT1);
-	tmp = inb(AD1848_THINKPAD_CTL_PORT2);
-
-	if (on)
-		/* turn it on */
-		tmp |= AD1848_THINKPAD_CS4248_ENABLE_BIT;
-	else
-		/* turn it off */
-		tmp &= ~AD1848_THINKPAD_CS4248_ENABLE_BIT;
-	
-	outb(tmp, AD1848_THINKPAD_CTL_PORT2);
-
-}
-
-#ifdef CONFIG_PM
-static void snd_ad1848_suspend(struct snd_wss *chip)
-{
-	snd_pcm_suspend_all(chip->pcm);
-	if (chip->thinkpad_flag)
-		snd_ad1848_thinkpad_twiddle(chip, 0);
-}
-
-static void snd_ad1848_resume(struct snd_wss *chip)
-{
-	int i;
-
-	if (chip->thinkpad_flag)
-		snd_ad1848_thinkpad_twiddle(chip, 1);
-
-	/* clear any pendings IRQ */
-	inb(chip->port + CS4231P(STATUS));
-	outb(0, chip->port + CS4231P(STATUS));
-	mb();
-
-	snd_ad1848_mce_down(chip);
-	for (i = 0; i < 16; i++)
-		snd_ad1848_out(chip, i, chip->image[i]);
-	snd_ad1848_mce_up(chip);
-	snd_ad1848_mce_down(chip);
-}
-#endif /* CONFIG_PM */
-
-static int snd_ad1848_probe(struct snd_wss *chip)
-{
-	unsigned long flags;
-	int i, id, rev, ad1847;
-	unsigned char *ptr;
-
-#if 0
-	snd_ad1848_debug(chip);
-#endif
-	id = ad1847 = 0;
-	for (i = 0; i < 1000; i++) {
-		mb();
-		if (inb(chip->port + CS4231P(REGSEL)) & AD1848_INIT)
-			udelay(500);
-		else {
-			spin_lock_irqsave(&chip->reg_lock, flags);
-			snd_ad1848_out(chip, AD1848_MISC_INFO, 0x00);
-			snd_ad1848_out(chip, AD1848_LEFT_INPUT, 0xaa);
-			snd_ad1848_out(chip, AD1848_RIGHT_INPUT, 0x45);
-			rev = snd_ad1848_in(chip, AD1848_RIGHT_INPUT);
-			if (rev == 0x65) {
-				spin_unlock_irqrestore(&chip->reg_lock, flags);
-				id = 1;
-				ad1847 = 1;
-				break;
-			}
-			if (snd_ad1848_in(chip, AD1848_LEFT_INPUT) == 0xaa && rev == 0x45) {
-				spin_unlock_irqrestore(&chip->reg_lock, flags);
-				id = 1;
-				break;
-			}
-			spin_unlock_irqrestore(&chip->reg_lock, flags);
-		}
-	}
-	if (id != 1)
-		return -ENODEV;	/* no valid device found */
-	if (chip->hardware == WSS_HW_DETECT) {
-		if (ad1847) {
-			chip->hardware = WSS_HW_AD1847;
-		} else {
-			chip->hardware = WSS_HW_AD1848;
-			rev = snd_ad1848_in(chip, AD1848_MISC_INFO);
-			if (rev & 0x80) {
-				chip->hardware = WSS_HW_CS4248;
-			} else if ((rev & 0x0f) == 0x0a) {
-				snd_ad1848_out(chip, AD1848_MISC_INFO, 0x40);
-				for (i = 0; i < 16; ++i) {
-					if (snd_ad1848_in(chip, i) != snd_ad1848_in(chip, i + 16)) {
-						chip->hardware = WSS_HW_CMI8330;
-						break;
-					}
-				}
-				snd_ad1848_out(chip, AD1848_MISC_INFO, 0x00);
-			}
-		}
-	}
-	spin_lock_irqsave(&chip->reg_lock, flags);
-	inb(chip->port + CS4231P(STATUS));	/* clear any pendings IRQ */
-	outb(0, chip->port + CS4231P(STATUS));
-	mb();
-	spin_unlock_irqrestore(&chip->reg_lock, flags);
-
-	chip->image[AD1848_MISC_INFO] = 0x00;
-	chip->image[AD1848_IFACE_CTRL] =
-	    (chip->image[AD1848_IFACE_CTRL] & ~AD1848_SINGLE_DMA) | AD1848_SINGLE_DMA;
-	ptr = (unsigned char *) &chip->image;
-	snd_ad1848_mce_down(chip);
-	spin_lock_irqsave(&chip->reg_lock, flags);
-	for (i = 0; i < 16; i++)	/* ok.. fill all AD1848 registers */
-		snd_ad1848_out(chip, i, *ptr++);
-	spin_unlock_irqrestore(&chip->reg_lock, flags);
-	snd_ad1848_mce_up(chip);
-	/* init needed for WSS pcm */
-	spin_lock_irqsave(&chip->reg_lock, flags);
-	chip->image[AD1848_IFACE_CTRL] &= ~(AD1848_PLAYBACK_ENABLE |
-				AD1848_PLAYBACK_PIO |
-				AD1848_CAPTURE_ENABLE |
-				AD1848_CAPTURE_PIO |
-				AD1848_CALIB_MODE);
-	chip->image[AD1848_IFACE_CTRL] |= AD1848_AUTOCALIB;
-	snd_ad1848_out(chip, AD1848_IFACE_CTRL, chip->image[AD1848_IFACE_CTRL]);
-	spin_unlock_irqrestore(&chip->reg_lock, flags);
-	snd_ad1848_mce_down(chip);
-	return 0;		/* all things are ok.. */
-}
-
-/*
-
- */
-
-static int snd_ad1848_free(struct snd_wss *chip)
-{
-	release_and_free_resource(chip->res_port);
-	if (chip->irq >= 0)
-		free_irq(chip->irq, (void *) chip);
-	if (chip->dma1 >= 0) {
-		snd_dma_disable(chip->dma1);
-		free_dma(chip->dma1);
-	}
-	kfree(chip);
-	return 0;
-}
-
-static int snd_ad1848_dev_free(struct snd_device *device)
-{
-	struct snd_wss *chip = device->device_data;
-	return snd_ad1848_free(chip);
-}
-
-int snd_ad1848_create(struct snd_card *card,
-		      unsigned long port,
-		      int irq, int dma,
-		      unsigned short hardware,
-		      struct snd_wss **rchip)
-{
-	static struct snd_device_ops ops = {
-		.dev_free =	snd_ad1848_dev_free,
-	};
-	struct snd_wss *chip;
-	int err;
-
-	*rchip = NULL;
-	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
-	spin_lock_init(&chip->reg_lock);
-	chip->card = card;
-	chip->port = port;
-	chip->irq = -1;
-	chip->dma1 = -1;
-	chip->dma2 = -1;
-	chip->single_dma = 1;
-	chip->hardware = hardware;
-	memcpy(&chip->image, &snd_ad1848_original_image, sizeof(snd_ad1848_original_image));
-	
-	if ((chip->res_port = request_region(port, 4, "AD1848")) == NULL) {
-		snd_printk(KERN_ERR "ad1848: can't grab port 0x%lx\n", port);
-		snd_ad1848_free(chip);
-		return -EBUSY;
-	}
-	if (request_irq(irq, snd_ad1848_interrupt, IRQF_DISABLED, "AD1848", (void *) chip)) {
-		snd_printk(KERN_ERR "ad1848: can't grab IRQ %d\n", irq);
-		snd_ad1848_free(chip);
-		return -EBUSY;
-	}
-	chip->irq = irq;
-	if (request_dma(dma, "AD1848")) {
-		snd_printk(KERN_ERR "ad1848: can't grab DMA %d\n", dma);
-		snd_ad1848_free(chip);
-		return -EBUSY;
-	}
-	chip->dma1 = dma;
-	chip->dma2 = dma;
-
-	if (hardware == WSS_HW_THINKPAD) {
-		chip->thinkpad_flag = 1;
-		chip->hardware = WSS_HW_DETECT; /* reset */
-		snd_ad1848_thinkpad_twiddle(chip, 1);
-	}
-
-	if (snd_ad1848_probe(chip) < 0) {
-		snd_ad1848_free(chip);
-		return -ENODEV;
-	}
-
-	/* Register device */
-	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
-		snd_ad1848_free(chip);
-		return err;
-	}
-
-#ifdef CONFIG_PM
-	chip->suspend = snd_ad1848_suspend;
-	chip->resume = snd_ad1848_resume;
-#endif
-
-	*rchip = chip;
-	return 0;
-}
-
-EXPORT_SYMBOL(snd_ad1848_create);
-
-/*
- *  INIT part
- */
-
-static int __init alsa_ad1848_init(void)
-{
-	return 0;
-}
-
-static void __exit alsa_ad1848_exit(void)
-{
-}
-
-module_init(alsa_ad1848_init)
-module_exit(alsa_ad1848_exit)