diff options
| author | Brandon Philips <brandon@ifup.org> | 2010-06-16 16:21:58 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2010-06-23 14:37:04 -0700 |
| commit | 38000a94a902e94ca8b5498f7871c6316de8957a (patch) | |
| tree | 3f749a720a341e8598017f5ab1f417d7a3625c87 /net | |
| parent | 6b2a541db58dba5860ccbcfaf36caee064b8a9fd (diff) | |
| download | op-kernel-dev-38000a94a902e94ca8b5498f7871c6316de8957a.zip op-kernel-dev-38000a94a902e94ca8b5498f7871c6316de8957a.tar.gz | |
sky2: enable rx/tx in sky2_phy_reinit()
sky2_phy_reinit is called by the ethtool helpers sky2_set_settings,
sky2_nway_reset and sky2_set_pauseparam when netif_running.
However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and
GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to
stop working:
$ ethtool -r eth0
$ ethtool -A eth0 autoneg off
Fix this issue by enabling Rx/Tx after running sky2_phy_init in
sky2_phy_reinit.
Signed-off-by: Brandon Philips <bphilips@suse.de>
Tested-by: Brandon Philips <bphilips@suse.de>
Cc: stable@kernel.org
Tested-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net')
0 files changed, 0 insertions, 0 deletions
