summaryrefslogtreecommitdiffstats
path: root/net
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@osdl.org>2006-08-17 18:20:18 -0700
committerDavid S. Miller <davem@sunset.davemloft.net>2006-09-22 14:55:09 -0700
commit2e4ca75b31b6851dcc036c2cdebf3ecfe279a653 (patch)
treee1810a6adbbf145b7fafbdaef002b7752a1d2b4f /net
parentd3e01f71863da30a2d6bfca069a036168b6c8607 (diff)
downloadop-kernel-dev-2e4ca75b31b6851dcc036c2cdebf3ecfe279a653.zip
op-kernel-dev-2e4ca75b31b6851dcc036c2cdebf3ecfe279a653.tar.gz
[ETH]: indentation and cleanup
Run ethernet support through Lindent and fix up. Applies after docbook comments patch Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net')
-rw-r--r--net/ethernet/eth.c96
1 files changed, 46 insertions, 50 deletions
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 72bdb15..4386393 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -78,39 +78,37 @@ __setup("ether=", netdev_boot_setup);
* in here instead. It is up to the 802.2 layer to carry protocol information.
*/
int eth_header(struct sk_buff *skb, struct net_device *dev, unsigned short type,
- void *daddr, void *saddr, unsigned len)
+ void *daddr, void *saddr, unsigned len)
{
- struct ethhdr *eth = (struct ethhdr *)skb_push(skb,ETH_HLEN);
+ struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN);
- if(type!=ETH_P_802_3)
+ if (type != ETH_P_802_3)
eth->h_proto = htons(type);
else
eth->h_proto = htons(len);
/*
- * Set the source hardware address.
+ * Set the source hardware address.
*/
-
- if(!saddr)
+
+ if (!saddr)
saddr = dev->dev_addr;
- memcpy(eth->h_source,saddr,dev->addr_len);
+ memcpy(eth->h_source, saddr, dev->addr_len);
- if(daddr)
- {
- memcpy(eth->h_dest,daddr,dev->addr_len);
+ if (daddr) {
+ memcpy(eth->h_dest, daddr, dev->addr_len);
return ETH_HLEN;
}
-
+
/*
- * Anyway, the loopback-device should never use this function...
+ * Anyway, the loopback-device should never use this function...
*/
- if (dev->flags & (IFF_LOOPBACK|IFF_NOARP))
- {
+ if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
memset(eth->h_dest, 0, dev->addr_len);
return ETH_HLEN;
}
-
+
return -ETH_HLEN;
}
@@ -129,17 +127,16 @@ int eth_rebuild_header(struct sk_buff *skb)
struct ethhdr *eth = (struct ethhdr *)skb->data;
struct net_device *dev = skb->dev;
- switch (eth->h_proto)
- {
+ switch (eth->h_proto) {
#ifdef CONFIG_INET
case __constant_htons(ETH_P_IP):
- return arp_find(eth->h_dest, skb);
-#endif
+ return arp_find(eth->h_dest, skb);
+#endif
default:
printk(KERN_DEBUG
- "%s: unable to resolve type %X addresses.\n",
+ "%s: unable to resolve type %X addresses.\n",
dev->name, (int)eth->h_proto);
-
+
memcpy(eth->h_source, dev->dev_addr, dev->addr_len);
break;
}
@@ -147,7 +144,6 @@ int eth_rebuild_header(struct sk_buff *skb)
return 0;
}
-
/**
* eth_type_trans - determine the packet's protocol ID.
* @skb: received socket data
@@ -161,50 +157,51 @@ __be16 eth_type_trans(struct sk_buff *skb, struct net_device *dev)
{
struct ethhdr *eth;
unsigned char *rawp;
-
+
skb->mac.raw = skb->data;
- skb_pull(skb,ETH_HLEN);
+ skb_pull(skb, ETH_HLEN);
eth = eth_hdr(skb);
-
+
if (is_multicast_ether_addr(eth->h_dest)) {
if (!compare_ether_addr(eth->h_dest, dev->broadcast))
skb->pkt_type = PACKET_BROADCAST;
else
skb->pkt_type = PACKET_MULTICAST;
}
-
+
/*
- * This ALLMULTI check should be redundant by 1.4
- * so don't forget to remove it.
+ * This ALLMULTI check should be redundant by 1.4
+ * so don't forget to remove it.
*
- * Seems, you forgot to remove it. All silly devices
- * seems to set IFF_PROMISC.
+ * Seems, you forgot to remove it. All silly devices
+ * seems to set IFF_PROMISC.
*/
-
- else if(1 /*dev->flags&IFF_PROMISC*/) {
+
+ else if (1 /*dev->flags&IFF_PROMISC */ ) {
if (unlikely(compare_ether_addr(eth->h_dest, dev->dev_addr)))
skb->pkt_type = PACKET_OTHERHOST;
}
-
+
if (ntohs(eth->h_proto) >= 1536)
return eth->h_proto;
-
+
rawp = skb->data;
-
+
/*
- * This is a magic hack to spot IPX packets. Older Novell breaks
- * the protocol design and runs IPX over 802.3 without an 802.2 LLC
- * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
- * won't work for fault tolerant netware but does for the rest.
+ * This is a magic hack to spot IPX packets. Older Novell breaks
+ * the protocol design and runs IPX over 802.3 without an 802.2 LLC
+ * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
+ * won't work for fault tolerant netware but does for the rest.
*/
if (*(unsigned short *)rawp == 0xFFFF)
return htons(ETH_P_802_3);
-
+
/*
- * Real 802.2 LLC
+ * Real 802.2 LLC
*/
return htons(ETH_P_802_2);
}
+EXPORT_SYMBOL(eth_type_trans);
/**
* eth_header_parse - extract hardware address from packet
@@ -230,8 +227,8 @@ int eth_header_cache(struct neighbour *neigh, struct hh_cache *hh)
struct ethhdr *eth;
struct net_device *dev = neigh->dev;
- eth = (struct ethhdr*)
- (((u8*)hh->hh_data) + (HH_DATA_OFF(sizeof(*eth))));
+ eth = (struct ethhdr *)
+ (((u8 *) hh->hh_data) + (HH_DATA_OFF(sizeof(*eth))));
if (type == __constant_htons(ETH_P_802_3))
return -1;
@@ -251,14 +248,13 @@ int eth_header_cache(struct neighbour *neigh, struct hh_cache *hh)
*
* Called by Address Resolution module to notify changes in address.
*/
-void eth_header_cache_update(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr)
+void eth_header_cache_update(struct hh_cache *hh, struct net_device *dev,
+ unsigned char *haddr)
{
- memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
+ memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)),
haddr, dev->addr_len);
}
-EXPORT_SYMBOL(eth_type_trans);
-
/**
* eth_mac_addr - set new Ethernet hardware address
* @dev: network device
@@ -270,10 +266,10 @@ EXPORT_SYMBOL(eth_type_trans);
*/
static int eth_mac_addr(struct net_device *dev, void *p)
{
- struct sockaddr *addr=p;
+ struct sockaddr *addr = p;
if (netif_running(dev))
return -EBUSY;
- memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
return 0;
}
@@ -315,7 +311,7 @@ void ether_setup(struct net_device *dev)
dev->tx_queue_len = 1000; /* Ethernet wants good queues */
dev->flags = IFF_BROADCAST|IFF_MULTICAST;
- memset(dev->broadcast,0xFF, ETH_ALEN);
+ memset(dev->broadcast, 0xFF, ETH_ALEN);
}
EXPORT_SYMBOL(ether_setup);
OpenPOWER on IntegriCloud