cfg80211: Add API to change the indoor regulatory setting

Previously, the indoor setting configuration assumed that as
long as a station interface is connected, the indoor environment
setting does not change. However, this assumption is problematic
as:

- It is possible that a station interface is connected to a mobile
  AP, e.g., softAP or a P2P GO, where it is possible that both the
  station and the mobile AP move out of the indoor environment making
  the indoor setting invalid. In such a case, user space has no way to
  invalidate the setting.
- A station interface disconnection does not necessarily imply that
  the device is no longer operating in an indoor environment, e.g.,
  it is possible that the station interface is roaming but is still
  stays indoor.

To handle the above, extend the indoor configuration API to allow
user space to indicate a change of indoor settings, and allow it to
indicate weather it controls the indoor setting, such that:

1. If the user space process explicitly indicates that it is going
   to control the indoor setting, do not clear the indoor setting
   internally, unless the socket is released. The user space process
   should use the NL80211_ATTR_SOCKET_OWNER attribute in the command
   to state that it is going to control the indoor setting.
2. Reset the indoor setting when restoring the regulatory settings in
   case it is not owned by a user space process.

Based on the above, a user space tool that continuously monitors the
indoor settings, i.e., tracking power setting, location etc., can
indicate environment changes to the regulatory core.

It should be noted that currently user space is the only provided mechanism
used to hint to the regulatory core over the indoor/outdoor environment --
while the country IEs do have an environment setting this has been completely
ignored by the regulatory core by design for a while now since country IEs
typically can contain bogus data.

Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: ArikX Nemtsov <arik@wizery.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

3 files changed, 85 insertions, 6 deletions

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 07cef3d..b020853 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -399,6 +399,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
 	[NL80211_ATTR_WIPHY_SELF_MANAGED_REG] = { .type = NLA_FLAG },
 	[NL80211_ATTR_NETNS_FD] = { .type = NLA_U32 },
 	[NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
+	[NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
 };
 
 /* policy for the key attributes */
@@ -4958,7 +4959,10 @@ static int parse_reg_rule(struct nlattr *tb[],
 static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
 {
 	char *data = NULL;
+	bool is_indoor;
 	enum nl80211_user_reg_hint_type user_reg_hint_type;
+	u32 owner_nlportid;
+
 
 	/*
 	 * You should only get this when cfg80211 hasn't yet initialized
@@ -4984,7 +4988,15 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
 		data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
 		return regulatory_hint_user(data, user_reg_hint_type);
 	case NL80211_USER_REG_HINT_INDOOR:
-		return regulatory_hint_indoor_user();
+		if (info->attrs[NL80211_ATTR_SOCKET_OWNER]) {
+			owner_nlportid = info->snd_portid;
+			is_indoor = !!info->attrs[NL80211_ATTR_REG_INDOOR];
+		} else {
+			owner_nlportid = 0;
+			is_indoor = true;
+		}
+
+		return regulatory_hint_indoor(is_indoor, owner_nlportid);
 	default:
 		return -EINVAL;
 	}
@@ -12810,6 +12822,11 @@ static int nl80211_netlink_notify(struct notifier_block * nb,
 
 	rcu_read_unlock();
 
+	/*
+	 * It is possible that the user space process that is controlling the
+	 * indoor setting disappeared, so notify the regulatory core.
+	 */
+	regulatory_netlink_notify(notify->portid);
 	return NOTIFY_OK;
 }
 
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index c24c8bf..4239dd4 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -128,9 +128,12 @@ static int reg_num_devs_support_basehint;
  * State variable indicating if the platform on which the devices
  * are attached is operating in an indoor environment. The state variable
  * is relevant for all registered devices.
- * (protected by RTNL)
  */
 static bool reg_is_indoor;
+static spinlock_t reg_indoor_lock;
+
+/* Used to track the userspace process controlling the indoor setting */
+static u32 reg_is_indoor_portid;
 
 static const struct ieee80211_regdomain *get_cfg80211_regdom(void)
 {
@@ -2288,15 +2291,50 @@ int regulatory_hint_user(const char *alpha2,
 	return 0;
 }
 
-int regulatory_hint_indoor_user(void)
+int regulatory_hint_indoor(bool is_indoor, u32 portid)
 {
+	spin_lock(&reg_indoor_lock);
+
+	/* It is possible that more than one user space process is trying to
+	 * configure the indoor setting. To handle such cases, clear the indoor
+	 * setting in case that some process does not think that the device
+	 * is operating in an indoor environment. In addition, if a user space
+	 * process indicates that it is controlling the indoor setting, save its
+	 * portid, i.e., make it the owner.
+	 */
+	reg_is_indoor = is_indoor;
+	if (reg_is_indoor) {
+		if (!reg_is_indoor_portid)
+			reg_is_indoor_portid = portid;
+	} else {
+		reg_is_indoor_portid = 0;
+	}
 
+	spin_unlock(&reg_indoor_lock);
 
-	reg_is_indoor = true;
+	if (!is_indoor)
+		reg_check_channels();
 
 	return 0;
 }
 
+void regulatory_netlink_notify(u32 portid)
+{
+	spin_lock(&reg_indoor_lock);
+
+	if (reg_is_indoor_portid != portid) {
+		spin_unlock(&reg_indoor_lock);
+		return;
+	}
+
+	reg_is_indoor = false;
+	reg_is_indoor_portid = 0;
+
+	spin_unlock(&reg_indoor_lock);
+
+	reg_check_channels();
+}
+
 /* Driver hints */
 int regulatory_hint(struct wiphy *wiphy, const char *alpha2)
 {
@@ -2464,7 +2502,17 @@ static void restore_regulatory_settings(bool reset_user)
 
 	ASSERT_RTNL();
 
-	reg_is_indoor = false;
+	/*
+	 * Clear the indoor setting in case that it is not controlled by user
+	 * space, as otherwise there is no guarantee that the device is still
+	 * operating in an indoor environment.
+	 */
+	spin_lock(&reg_indoor_lock);
+	if (reg_is_indoor && !reg_is_indoor_portid) {
+		reg_is_indoor = false;
+		reg_check_channels();
+	}
+	spin_unlock(&reg_indoor_lock);
 
 	reset_regdomains(true, &world_regdom);
 	restore_alpha2(alpha2, reset_user);
@@ -3061,6 +3109,7 @@ int __init regulatory_init(void)
 
 	spin_lock_init(&reg_requests_lock);
 	spin_lock_init(&reg_pending_beacons_lock);
+	spin_lock_init(&reg_indoor_lock);
 
 	reg_regdb_size_check();
 
diff --git a/net/wireless/reg.h b/net/wireless/reg.h
index 4b45d6e..a2c4e16 100644
--- a/net/wireless/reg.h
+++ b/net/wireless/reg.h
@@ -25,7 +25,20 @@ enum nl80211_dfs_regions reg_get_dfs_region(struct wiphy *wiphy);
 
 int regulatory_hint_user(const char *alpha2,
 			 enum nl80211_user_reg_hint_type user_reg_hint_type);
-int regulatory_hint_indoor_user(void);
+
+/**
+ * regulatory_hint_indoor - hint operation in indoor env. or not
+ * @is_indoor: if true indicates that user space thinks that the
+ * device is operating in an indoor environment.
+ * @portid: the netlink port ID on which the hint was given.
+ */
+int regulatory_hint_indoor(bool is_indoor, u32 portid);
+
+/**
+ * regulatory_netlink_notify - notify on released netlink socket
+ * @portid: the netlink socket port ID
+ */
+void regulatory_netlink_notify(u32 portid);
 
 void wiphy_regulatory_register(struct wiphy *wiphy);
 void wiphy_regulatory_deregister(struct wiphy *wiphy);