summaryrefslogtreecommitdiffstats
path: root/net/nfc/nci
diff options
context:
space:
mode:
authorVincent Cuissard <cuissard@marvell.com>2015-10-26 10:27:43 +0100
committerSamuel Ortiz <sameo@linux.intel.com>2015-10-27 04:23:34 +0100
commit2bd832459a0827b8dcf13b345380b66f92089d74 (patch)
tree4394c323d19ae4979a91a73aa780c57d90e09f1c /net/nfc/nci
parentfcd9d046fd8998cc984f2ff80e76f246ebca15b6 (diff)
downloadop-kernel-dev-2bd832459a0827b8dcf13b345380b66f92089d74.zip
op-kernel-dev-2bd832459a0827b8dcf13b345380b66f92089d74.tar.gz
NFC: NCI: allow spi driver to choose transfer clock
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'net/nfc/nci')
-rw-r--r--net/nfc/nci/spi.c7
1 files changed, 6 insertions, 1 deletions
diff --git a/net/nfc/nci/spi.c b/net/nfc/nci/spi.c
index 25153d0..d904cd2 100644
--- a/net/nfc/nci/spi.c
+++ b/net/nfc/nci/spi.c
@@ -58,6 +58,7 @@ static int __nci_spi_send(struct nci_spi *nspi, struct sk_buff *skb,
}
t.cs_change = cs_change;
t.delay_usecs = nspi->xfer_udelay;
+ t.speed_hz = nspi->xfer_speed_hz;
spi_message_init(&m);
spi_message_add_tail(&t, &m);
@@ -144,7 +145,8 @@ struct nci_spi *nci_spi_allocate_spi(struct spi_device *spi,
nspi->acknowledge_mode = acknowledge_mode;
nspi->xfer_udelay = delay;
-
+ /* Use controller max SPI speed by default */
+ nspi->xfer_speed_hz = 0;
nspi->spi = spi;
nspi->ndev = ndev;
init_completion(&nspi->req_completion);
@@ -197,12 +199,14 @@ static struct sk_buff *__nci_spi_read(struct nci_spi *nspi)
tx.tx_buf = req;
tx.len = 2;
tx.cs_change = 0;
+ tx.speed_hz = nspi->xfer_speed_hz;
spi_message_add_tail(&tx, &m);
memset(&rx, 0, sizeof(struct spi_transfer));
rx.rx_buf = resp_hdr;
rx.len = 2;
rx.cs_change = 1;
+ rx.speed_hz = nspi->xfer_speed_hz;
spi_message_add_tail(&rx, &m);
ret = spi_sync(nspi->spi, &m);
@@ -226,6 +230,7 @@ static struct sk_buff *__nci_spi_read(struct nci_spi *nspi)
rx.len = rx_len;
rx.cs_change = 0;
rx.delay_usecs = nspi->xfer_udelay;
+ rx.speed_hz = nspi->xfer_speed_hz;
spi_message_add_tail(&rx, &m);
ret = spi_sync(nspi->spi, &m);
OpenPOWER on IntegriCloud