Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John Linville says:

====================
Here is another batch of updates intended for 3.6.  This includes a
number of pulls, including ones from the mac80211, iwlwifi, ath6kl, and
wl12xx trees.  I also pulled from the wireless tree to avoid potential
build conflicts.  There are a number of other patches applied directly,
including a number for the Broadcom drivers and the mwifiex driver.

The updates cover the usual variety of new hardware support and feature
enhancements.  It's all good work, but there aren't any big headliners.
This does resolve a net-next/wireless-next merge conflict reported
by Stephen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 32 insertions, 29 deletions

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index be4fad1..a1dbd15 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -13,12 +13,6 @@
 #include "rate.h"
 #include "mesh.h"
 
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
-#define mpl_dbg(fmt, args...)	pr_debug(fmt, ##args)
-#else
-#define mpl_dbg(fmt, args...)	do { (void)(0); } while (0)
-#endif
-
 #define PLINK_GET_LLID(p) (p + 2)
 #define PLINK_GET_PLID(p) (p + 4)
 
@@ -134,12 +128,14 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
 
 		switch (sta->ch_type) {
 		case NL80211_CHAN_NO_HT:
-			mpl_dbg("mesh_plink %pM: nonHT sta (%pM) is present",
+			mpl_dbg(sdata,
+				"mesh_plink %pM: nonHT sta (%pM) is present\n",
 				sdata->vif.addr, sta->sta.addr);
 			non_ht_sta = true;
 			goto out;
 		case NL80211_CHAN_HT20:
-			mpl_dbg("mesh_plink %pM: HT20 sta (%pM) is present",
+			mpl_dbg(sdata,
+				"mesh_plink %pM: HT20 sta (%pM) is present\n",
 				sdata->vif.addr, sta->sta.addr);
 			ht20_sta = true;
 		default:
@@ -160,7 +156,8 @@ out:
 		sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
 		sdata->u.mesh.mshcfg.ht_opmode = ht_opmode;
 		changed = BSS_CHANGED_HT;
-		mpl_dbg("mesh_plink %pM: protection mode changed to %d",
+		mpl_dbg(sdata,
+			"mesh_plink %pM: protection mode changed to %d\n",
 			sdata->vif.addr, ht_opmode);
 	}
 
@@ -437,7 +434,8 @@ static void mesh_plink_timer(unsigned long data)
 		spin_unlock_bh(&sta->lock);
 		return;
 	}
-	mpl_dbg("Mesh plink timer for %pM fired on state %d\n",
+	mpl_dbg(sta->sdata,
+		"Mesh plink timer for %pM fired on state %d\n",
 		sta->sta.addr, sta->plink_state);
 	reason = 0;
 	llid = sta->llid;
@@ -450,7 +448,8 @@ static void mesh_plink_timer(unsigned long data)
 		/* retry timer */
 		if (sta->plink_retries < dot11MeshMaxRetries(sdata)) {
 			u32 rand;
-			mpl_dbg("Mesh plink for %pM (retry, timeout): %d %d\n",
+			mpl_dbg(sta->sdata,
+				"Mesh plink for %pM (retry, timeout): %d %d\n",
 				sta->sta.addr, sta->plink_retries,
 				sta->plink_timeout);
 			get_random_bytes(&rand, sizeof(u32));
@@ -530,7 +529,8 @@ int mesh_plink_open(struct sta_info *sta)
 	sta->plink_state = NL80211_PLINK_OPN_SNT;
 	mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata));
 	spin_unlock_bh(&sta->lock);
-	mpl_dbg("Mesh plink: starting establishment with %pM\n",
+	mpl_dbg(sdata,
+		"Mesh plink: starting establishment with %pM\n",
 		sta->sta.addr);
 
 	return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
@@ -565,7 +565,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	u8 *baseaddr;
 	u32 changed = 0;
 	__le16 plid, llid, reason;
-#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
 	static const char *mplstates[] = {
 		[NL80211_PLINK_LISTEN] = "LISTEN",
 		[NL80211_PLINK_OPN_SNT] = "OPN-SNT",
@@ -575,14 +574,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		[NL80211_PLINK_HOLDING] = "HOLDING",
 		[NL80211_PLINK_BLOCKED] = "BLOCKED"
 	};
-#endif
 
 	/* need action_code, aux */
 	if (len < IEEE80211_MIN_ACTION_SIZE + 3)
 		return;
 
 	if (is_multicast_ether_addr(mgmt->da)) {
-		mpl_dbg("Mesh plink: ignore frame from multicast address");
+		mpl_dbg(sdata,
+			"Mesh plink: ignore frame from multicast address\n");
 		return;
 	}
 
@@ -595,12 +594,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	}
 	ieee802_11_parse_elems(baseaddr, len - baselen, &elems);
 	if (!elems.peering) {
-		mpl_dbg("Mesh plink: missing necessary peer link ie\n");
+		mpl_dbg(sdata,
+			"Mesh plink: missing necessary peer link ie\n");
 		return;
 	}
 	if (elems.rsn_len &&
 			sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) {
-		mpl_dbg("Mesh plink: can't establish link with secure peer\n");
+		mpl_dbg(sdata,
+			"Mesh plink: can't establish link with secure peer\n");
 		return;
 	}
 
@@ -610,14 +611,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	    (ftype == WLAN_SP_MESH_PEERING_CONFIRM && ie_len != 6) ||
 	    (ftype == WLAN_SP_MESH_PEERING_CLOSE && ie_len != 6
 							&& ie_len != 8)) {
-		mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
-		    ftype, ie_len);
+		mpl_dbg(sdata,
+			"Mesh plink: incorrect plink ie length %d %d\n",
+			ftype, ie_len);
 		return;
 	}
 
 	if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
 				(!elems.mesh_id || !elems.mesh_config)) {
-		mpl_dbg("Mesh plink: missing necessary ie\n");
+		mpl_dbg(sdata, "Mesh plink: missing necessary ie\n");
 		return;
 	}
 	/* Note the lines below are correct, the llid in the frame is the plid
@@ -632,21 +634,21 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
 	sta = sta_info_get(sdata, mgmt->sa);
 	if (!sta && ftype != WLAN_SP_MESH_PEERING_OPEN) {
-		mpl_dbg("Mesh plink: cls or cnf from unknown peer\n");
+		mpl_dbg(sdata, "Mesh plink: cls or cnf from unknown peer\n");
 		rcu_read_unlock();
 		return;
 	}
 
 	if (ftype == WLAN_SP_MESH_PEERING_OPEN &&
 	    !rssi_threshold_check(sta, sdata)) {
-		mpl_dbg("Mesh plink: %pM does not meet rssi threshold\n",
+		mpl_dbg(sdata, "Mesh plink: %pM does not meet rssi threshold\n",
 			mgmt->sa);
 		rcu_read_unlock();
 		return;
 	}
 
 	if (sta && !test_sta_flag(sta, WLAN_STA_AUTH)) {
-		mpl_dbg("Mesh plink: Action frame from non-authed peer\n");
+		mpl_dbg(sdata, "Mesh plink: Action frame from non-authed peer\n");
 		rcu_read_unlock();
 		return;
 	}
@@ -683,7 +685,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 	} else if (!sta) {
 		/* ftype == WLAN_SP_MESH_PEERING_OPEN */
 		if (!mesh_plink_free_count(sdata)) {
-			mpl_dbg("Mesh plink error: no more free plinks\n");
+			mpl_dbg(sdata, "Mesh plink error: no more free plinks\n");
 			rcu_read_unlock();
 			return;
 		}
@@ -724,7 +726,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 				event = CLS_ACPT;
 			break;
 		default:
-			mpl_dbg("Mesh plink: unknown frame subtype\n");
+			mpl_dbg(sdata, "Mesh plink: unknown frame subtype\n");
 			rcu_read_unlock();
 			return;
 		}
@@ -734,13 +736,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 		/* allocate sta entry if necessary and update info */
 		sta = mesh_peer_init(sdata, mgmt->sa, &elems);
 		if (!sta) {
-			mpl_dbg("Mesh plink: failed to init peer!\n");
+			mpl_dbg(sdata, "Mesh plink: failed to init peer!\n");
 			rcu_read_unlock();
 			return;
 		}
 	}
 
-	mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
+	mpl_dbg(sdata,
+		"Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
 		mgmt->sa, mplstates[sta->plink_state],
 		le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
 		event);
@@ -851,7 +854,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_inc_estab_count(sdata);
 			changed |= mesh_set_ht_prot_mode(sdata);
 			changed |= BSS_CHANGED_BEACON;
-			mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+			mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
 			break;
 		default:
@@ -887,7 +890,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 			mesh_plink_inc_estab_count(sdata);
 			changed |= mesh_set_ht_prot_mode(sdata);
 			changed |= BSS_CHANGED_BEACON;
-			mpl_dbg("Mesh plink with %pM ESTABLISHED\n",
+			mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n",
 				sta->sta.addr);
 			mesh_plink_frame_tx(sdata,
 					    WLAN_SP_MESH_PEERING_CONFIRM,