summaryrefslogtreecommitdiffstats
path: root/net/mac80211/ieee80211.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes@sipsolutions.net>2007-08-28 17:01:55 -0400
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:48:53 -0700
commit11a843b7e16062389c53ba393c7913956e034eb2 (patch)
tree7f557a55220a0de38f0eafe1a5147487ec39b790 /net/mac80211/ieee80211.c
parent3aefaa3294193c931b20a574f718efee6baf27d4 (diff)
downloadop-kernel-dev-11a843b7e16062389c53ba393c7913956e034eb2.zip
op-kernel-dev-11a843b7e16062389c53ba393c7913956e034eb2.tar.gz
[MAC80211]: rework key handling
This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/mac80211/ieee80211.c')
-rw-r--r--net/mac80211/ieee80211.c6
1 files changed, 5 insertions, 1 deletions
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 5d5034f..73e314e 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -442,6 +442,7 @@ static int ieee80211_open(struct net_device *dev)
} else {
ieee80211_if_config(dev);
ieee80211_reset_erp_info(dev);
+ ieee80211_enable_keys(sdata);
}
if (sdata->type == IEEE80211_IF_TYPE_STA &&
@@ -510,6 +511,9 @@ static int ieee80211_stop(struct net_device *dev)
local->monitors--;
if (!local->monitors)
local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
+ } else {
+ /* disable all keys for as long as this netdev is down */
+ ieee80211_disable_keys(sdata);
}
local->open_count--;
@@ -908,7 +912,7 @@ static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
}
if (skb->len >= mic_len &&
- (key->conf.flags & IEEE80211_KEY_FORCE_SW_ENCRYPT))
+ !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
skb_trim(skb, skb->len - mic_len);
if (skb->len >= iv_len && skb->len > hdrlen) {
memmove(skb->data + iv_len, skb->data, hdrlen);
OpenPOWER on IntegriCloud