diff options
author | Emmanuel Grumbach <emmanuel.grumbach@intel.com> | 2013-10-01 16:45:43 +0300 |
---|---|---|
committer | Johannes Berg <johannes.berg@intel.com> | 2013-10-28 15:05:11 +0100 |
commit | 687da132234feb70748df04a007bc1820f392254 (patch) | |
tree | 6255afe03b39518c2f83251fd0dd0afed647dd44 /net/mac80211/cfg.c | |
parent | 7ec7c4a9a686c608315739ab6a2b0527a240883c (diff) | |
download | op-kernel-dev-687da132234feb70748df04a007bc1820f392254.zip op-kernel-dev-687da132234feb70748df04a007bc1820f392254.tar.gz |
mac80211: implement SMPS for AP
When the driver requests to move to STATIC or DYNAMIC SMPS,
we send an action frame to each associated station and
reconfigure the channel context / driver.
Of course, non-MIMO stations are ignored.
The beacon isn't updated. The association response will
include the original capabilities. Stations that associate
while in non-OFF SMPS mode will get an action frame right
after association to inform them about our current state.
Note that we wait until the end of the EAPOL. Sending an
action frame before the EAPOL is finished can be an issue
for a few clients. Clients aren't likely to send EAPOL
frames in MIMO anyway.
When the SMPS configuration gets more permissive (e.g.
STATIC -> OFF), we don't wake up stations that are asleep
We remember that they don't know about the change and send
the action frame when they wake up.
When the SMPS configuration gets more restrictive (e.g.
OFF -> STATIC), we set the TIM bit for every sleeping STA.
uAPSD stations might send MIMO until they poll the action
frame, but this is for a short period of time.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[fix vht streams loop, initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'net/mac80211/cfg.c')
-rw-r--r-- | net/mac80211/cfg.c | 108 |
1 files changed, 105 insertions, 3 deletions
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index ac28af7..4a3d5a4 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1059,6 +1059,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) /* abort any running channel switch */ sdata->vif.csa_active = false; cancel_work_sync(&sdata->csa_finalize_work); + cancel_work_sync(&sdata->u.ap.request_smps_work); /* turn off carrier for this interface and dependent VLANs */ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) @@ -1553,6 +1554,20 @@ static int ieee80211_change_station(struct wiphy *wiphy, mutex_unlock(&local->sta_mtx); + if ((sdata->vif.type == NL80211_IFTYPE_AP || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && + sta->known_smps_mode != sta->sdata->bss->req_smps && + test_sta_flag(sta, WLAN_STA_AUTHORIZED) && + sta_info_tx_streams(sta) != 1) { + ht_dbg(sta->sdata, + "%pM just authorized and MIMO capable - update SMPS\n", + sta->sta.addr); + ieee80211_send_smps_action(sta->sdata, + sta->sdata->bss->req_smps, + sta->sta.addr, + sta->sdata->vif.bss_conf.bssid); + } + if (sdata->vif.type == NL80211_IFTYPE_STATION && params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { ieee80211_recalc_ps(local, -1); @@ -2337,8 +2352,92 @@ static int ieee80211_testmode_dump(struct wiphy *wiphy, } #endif -int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata, - enum ieee80211_smps_mode smps_mode) +int __ieee80211_request_smps_ap(struct ieee80211_sub_if_data *sdata, + enum ieee80211_smps_mode smps_mode) +{ + struct sta_info *sta; + enum ieee80211_smps_mode old_req; + int i; + + if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP)) + return -EINVAL; + + if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) + return 0; + + old_req = sdata->u.ap.req_smps; + sdata->u.ap.req_smps = smps_mode; + + /* AUTOMATIC doesn't mean much for AP - don't allow it */ + if (old_req == smps_mode || + smps_mode == IEEE80211_SMPS_AUTOMATIC) + return 0; + + /* If no associated stations, there's no need to do anything */ + if (!atomic_read(&sdata->u.ap.num_mcast_sta)) { + sdata->smps_mode = smps_mode; + ieee80211_queue_work(&sdata->local->hw, &sdata->recalc_smps); + return 0; + } + + ht_dbg(sdata, + "SMSP %d requested in AP mode, sending Action frame to %d stations\n", + smps_mode, atomic_read(&sdata->u.ap.num_mcast_sta)); + + mutex_lock(&sdata->local->sta_mtx); + for (i = 0; i < STA_HASH_SIZE; i++) { + for (sta = rcu_dereference_protected(sdata->local->sta_hash[i], + lockdep_is_held(&sdata->local->sta_mtx)); + sta; + sta = rcu_dereference_protected(sta->hnext, + lockdep_is_held(&sdata->local->sta_mtx))) { + /* + * Only stations associated to our AP and + * associated VLANs + */ + if (sta->sdata->bss != &sdata->u.ap) + continue; + + /* This station doesn't support MIMO - skip it */ + if (sta_info_tx_streams(sta) == 1) + continue; + + /* + * Don't wake up a STA just to send the action frame + * unless we are getting more restrictive. + */ + if (test_sta_flag(sta, WLAN_STA_PS_STA) && + !ieee80211_smps_is_restrictive(sta->known_smps_mode, + smps_mode)) { + ht_dbg(sdata, + "Won't send SMPS to sleeping STA %pM\n", + sta->sta.addr); + continue; + } + + /* + * If the STA is not authorized, wait until it gets + * authorized and the action frame will be sent then. + */ + if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) + continue; + + ht_dbg(sdata, "Sending SMPS to %pM\n", sta->sta.addr); + ieee80211_send_smps_action(sdata, smps_mode, + sta->sta.addr, + sdata->vif.bss_conf.bssid); + } + } + mutex_unlock(&sdata->local->sta_mtx); + + sdata->smps_mode = smps_mode; + ieee80211_queue_work(&sdata->local->hw, &sdata->recalc_smps); + + return 0; +} + +int __ieee80211_request_smps_mgd(struct ieee80211_sub_if_data *sdata, + enum ieee80211_smps_mode smps_mode) { const u8 *ap; enum ieee80211_smps_mode old_req; @@ -2346,6 +2445,9 @@ int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata, lockdep_assert_held(&sdata->wdev.mtx); + if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION)) + return -EINVAL; + old_req = sdata->u.mgd.req_smps; sdata->u.mgd.req_smps = smps_mode; @@ -2402,7 +2504,7 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, /* no change, but if automatic follow powersave */ sdata_lock(sdata); - __ieee80211_request_smps(sdata, sdata->u.mgd.req_smps); + __ieee80211_request_smps_mgd(sdata, sdata->u.mgd.req_smps); sdata_unlock(sdata); if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) |