Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 529 insertions, 0 deletions

diff --git a/net/irda/irnet/irnet.h b/net/irda/irnet/irnet.h
new file mode 100644
index 0000000..9004f73
--- /dev/null
+++ b/net/irda/irnet/irnet.h
@@ -0,0 +1,529 @@
+/*
+ *	IrNET protocol module : Synchronous PPP over an IrDA socket.
+ *
+ *		Jean II - HPL `00 - <jt@hpl.hp.com>
+ *
+ * This file contains definitions and declarations global to the IrNET module,
+ * all grouped in one place...
+ * This file is a *private* header, so other modules don't want to know
+ * what's in there...
+ *
+ * Note : as most part of the Linux kernel, this module is available
+ * under the GNU General Public License (GPL).
+ */
+
+#ifndef IRNET_H
+#define IRNET_H
+
+/************************** DOCUMENTATION ***************************/
+/*
+ * What is IrNET
+ * -------------
+ * IrNET is a protocol allowing to carry TCP/IP traffic between two
+ * IrDA peers in an efficient fashion. It is a thin layer, passing PPP
+ * packets to IrTTP and vice versa. It uses PPP in synchronous mode,
+ * because IrTTP offer a reliable sequenced packet service (as opposed
+ * to a byte stream). In fact, you could see IrNET as carrying TCP/IP
+ * in a IrDA socket, using PPP to provide the glue.
+ *
+ * The main difference with traditional PPP over IrCOMM is that we
+ * avoid the framing and serial emulation which are a performance
+ * bottleneck. It also allows multipoint communications in a sensible
+ * fashion.
+ *
+ * The main difference with IrLAN is that we use PPP for the link
+ * management, which is more standard, interoperable and flexible than
+ * the IrLAN protocol. For example, PPP adds authentication,
+ * encryption, compression, header compression and automated routing
+ * setup. And, as IrNET let PPP do the hard work, the implementation
+ * is much simpler than IrLAN.
+ *
+ * The Linux implementation
+ * ------------------------
+ * IrNET is written on top of the Linux-IrDA stack, and interface with
+ * the generic Linux PPP driver. Because IrNET depend on recent
+ * changes of the PPP driver interface, IrNET will work only with very
+ * recent kernel (2.3.99-pre6 and up).
+ * 
+ * The present implementation offer the following features :
+ *	o simple user interface using pppd
+ *	o efficient implementation (interface directly to PPP and IrTTP)
+ *	o addressing (you can specify the name of the IrNET recipient)
+ *	o multipoint operation (limited by IrLAP specification)
+ *	o information in /proc/net/irda/irnet
+ *	o IrNET events on /dev/irnet (for user space daemon)
+ *	o IrNET daemon (irnetd) to automatically handle incoming requests
+ *	o Windows 2000 compatibility (tested, but need more work)
+ * Currently missing :
+ *	o Lot's of testing (that's your job)
+ *	o Connection retries (may be too hard to do)
+ *	o Check pppd persist mode
+ *	o User space daemon (to automatically handle incoming requests)
+ *
+ * The setup is not currently the most easy, but this should get much
+ * better when everything will get integrated...
+ *
+ * Acknowledgements
+ * ----------------
+ * This module is based on :
+ *	o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras
+ *	o The IrLAN protocol (irlan_common/XXX) by Dag Brattli
+ *	o The IrSock interface (af_irda) by Dag Brattli
+ *	o Some other bits from the kernel and my drivers...
+ * Infinite thanks to those brave souls for providing the infrastructure
+ * upon which IrNET is built.
+ *
+ * Thanks to all my collegues in HP for helping me. In particular,
+ * thanks to Salil Pradhan and Bill Serra for W2k testing...
+ * Thanks to Luiz Magalhaes for irnetd and much testing...
+ *
+ * Thanks to Alan Cox for answering lot's of my stupid questions, and
+ * to Paul Mackerras answering my questions on how to best integrate
+ * IrNET and pppd.
+ *
+ * Jean II
+ *
+ * Note on some implementations choices...
+ * ------------------------------------
+ *	1) Direct interface vs tty/socket
+ * I could have used a tty interface to hook to ppp and use the full
+ * socket API to connect to IrDA. The code would have been easier to
+ * maintain, and maybe the code would have been smaller...
+ * Instead, we hook directly to ppp_generic and to IrTTP, which make
+ * things more complicated...
+ *
+ * The first reason is flexibility : this allow us to create IrNET
+ * instances on demand (no /dev/ircommX crap) and to allow linkname
+ * specification on pppd command line...
+ *
+ * Second reason is speed optimisation. If you look closely at the
+ * transmit and receive paths, you will notice that they are "super lean"
+ * (that's why they look ugly), with no function calls and as little data
+ * copy and modification as I could...
+ *
+ *	2) irnetd in user space
+ * irnetd is implemented in user space, which is necessary to call pppd.
+ * This also give maximum benefits in term of flexibility and customability,
+ * and allow to offer the event channel, useful for other stuff like debug.
+ *
+ * On the other hand, this require a loose coordination between the
+ * present module and irnetd. One critical area is how incoming request
+ * are handled.
+ * When irnet receive an incoming request, it send an event to irnetd and
+ * drop the incoming IrNET socket.
+ * irnetd start a pppd instance, which create a new IrNET socket. This new
+ * socket is then connected in the originating node to the pppd instance.
+ * At this point, in the originating node, the first socket is closed.
+ *
+ * I admit, this is a bit messy and waste some resources. The alternative
+ * is caching incoming socket, and that's also quite messy and waste
+ * resources.
+ * We also make connection time slower. For example, on a 115 kb/s link it
+ * adds 60ms to the connection time (770 ms). However, this is slower than
+ * the time it takes to fire up pppd on my P133...
+ *
+ *
+ * History :
+ * -------
+ *
+ * v1 - 15.5.00 - Jean II
+ *	o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint)
+ *	o control channel on /dev/irnet (set name/address)
+ *	o event channel on /dev/irnet (for user space daemon)
+ *
+ * v2 - 5.6.00 - Jean II
+ *	o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness...
+ *	o Add DISCONNECT_TO event and rename DISCONNECT_FROM.
+ *	o Set official device number alloaction on /dev/irnet
+ *
+ * v3 - 30.8.00 - Jean II
+ *	o Update to latest Linux-IrDA changes :
+ *		- queue_t => irda_queue_t
+ *	o Update to ppp-2.4.0 :
+ *		- move irda_irnet_connect from PPPIOCATTACH to TIOCSETD
+ *	o Add EXPIRE event (depend on new IrDA-Linux patch)
+ *	o Switch from `hashbin_remove' to `hashbin_remove_this' to fix
+ *	  a multilink bug... (depend on new IrDA-Linux patch)
+ *	o fix a self->daddr to self->raddr in irda_irnet_connect to fix
+ *	  another multilink bug (darn !)
+ *	o Remove LINKNAME_IOCTL cruft
+ *
+ * v3b - 31.8.00 - Jean II
+ *	o Dump discovery log at event channel startup
+ *
+ * v4 - 28.9.00 - Jean II
+ *	o Fix interaction between poll/select and dump discovery log
+ *	o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch)
+ *	o Add IRNET_NOANSWER_FROM event (mostly to help support)
+ *	o Release flow control in disconnect_indication
+ *	o Block packets while connecting (speed up connections)
+ *
+ * v5 - 11.01.01 - Jean II
+ *	o Init self->max_header_size, just in case...
+ *	o Set up ap->chan.hdrlen, to get zero copy on tx side working.
+ *	o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state
+ *		Thanks to Christian Gennerat for finding this bug !
+ *	---
+ *	o Declare the proper MTU/MRU that we can support
+ *		(but PPP doesn't read the MTU value :-()
+ *	o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid
+ *		disabling and enabling irq twice
+ *
+ * v6 - 31.05.01 - Jean II
+ *	o Print source address in Found, Discovery, Expiry & Request events
+ *	o Print requested source address in /proc/net/irnet
+ *	o Change control channel input. Allow multiple commands in one line.
+ *	o Add saddr command to change ap->rsaddr (and use that in IrDA)
+ *	---
+ *	o Make the IrDA connection procedure totally asynchronous.
+ *	  Heavy rewrite of the IAS query code and the whole connection
+ *	  procedure. Now, irnet_connect() no longer need to be called from
+ *	  a process context...
+ *	o Enable IrDA connect retries in ppp_irnet_send(). The good thing
+ *	  is that IrDA connect retries are directly driven by PPP LCP
+ *	  retries (we retry for each LCP packet), so that everything
+ *	  is transparently controlled from pppd lcp-max-configure.
+ *	o Add ttp_connect flag to prevent rentry on the connect procedure
+ *	o Test and fixups to eliminate side effects of retries
+ *
+ * v7 - 22.08.01 - Jean II
+ *	o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY"
+ *	o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the
+ *	  asynchronous IAS query, self->tsap is NULL when PPP send the
+ *	  first packet.  This was preventing "connect-delay 0" to work.
+ *	  Change the test in ppp_irnet_send() to self->ttp_connect.
+ *
+ * v8 - 1.11.01 - Jean II
+ *	o Tighten the use of self->ttp_connect and self->ttp_open to
+ *	  prevent various race conditions.
+ *	o Avoid leaking discovery log and skb
+ *	o Replace "self" with "server" in irnet_connect_indication() to
+ *	  better detect cut'n'paste error ;-)
+ *
+ * v9 - 29.11.01 - Jean II
+ *	o Fix event generation in disconnect indication that I broke in v8
+ *	  It was always generation "No-Answer" because I was testing ttp_open
+ *	  just after clearing it. *blush*.
+ *	o Use newly created irttp_listen() to fix potential crash when LAP
+ *	  destroyed before irnet module removed.
+ *
+ * v10 - 4.3.2 - Jean II
+ *	o When receiving a disconnect indication, don't reenable the
+ *	  PPP Tx queue, this will trigger a reconnect. Instead, close
+ *	  the channel, which will kill pppd...
+ *
+ * v11 - 20.3.02 - Jean II
+ *	o Oops ! v10 fix disabled IrNET retries and passive behaviour.
+ *	  Better fix in irnet_disconnect_indication() :
+ *	  - if connected, kill pppd via hangup.
+ *	  - if not connected, reenable ppp Tx, which trigger IrNET retry.
+ *
+ * v12 - 10.4.02 - Jean II
+ *	o Fix race condition in irnet_connect_indication().
+ *	  If the socket was already trying to connect, drop old connection
+ *	  and use new one only if acting as primary. See comments.
+ *
+ * v13 - 30.5.02 - Jean II
+ *	o Update module init code
+ *
+ * v14 - 20.2.03 - Jean II
+ *	o Add discovery hint bits in the control channel.
+ *	o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner
+ *
+ * v15 - 7.4.03 - Jean II
+ *	o Replace spin_lock_irqsave() with spin_lock_bh() so that we can
+ *	  use ppp_unit_number(). It's probably also better overall...
+ *	o Disable call to ppp_unregister_channel(), because we can't do it.
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/tty.h>
+#include <linux/proc_fs.h>
+#include <linux/devfs_fs_kernel.h>
+#include <linux/netdevice.h>
+#include <linux/miscdevice.h>
+#include <linux/poll.h>
+#include <linux/config.h>
+#include <linux/ctype.h>	/* isspace() */
+#include <asm/uaccess.h>
+#include <linux/init.h>
+
+#include <linux/ppp_defs.h>
+#include <linux/if_ppp.h>
+#include <linux/ppp_channel.h>
+
+#include <net/irda/irda.h>
+#include <net/irda/iriap.h>
+#include <net/irda/irias_object.h>
+#include <net/irda/irlmp.h>
+#include <net/irda/irttp.h>
+#include <net/irda/discovery.h>
+
+/***************************** OPTIONS *****************************/
+/*
+ * Define or undefine to compile or not some optional part of the
+ * IrNET driver...
+ * Note : the present defaults make sense, play with that at your
+ * own risk...
+ */
+/* IrDA side of the business... */
+#define DISCOVERY_NOMASK	/* To enable W2k compatibility... */
+#define ADVERTISE_HINT		/* Advertise IrLAN hint bit */
+#define ALLOW_SIMULT_CONNECT	/* This seem to work, cross fingers... */
+#define DISCOVERY_EVENTS	/* Query the discovery log to post events */
+#define INITIAL_DISCOVERY	/* Dump current discovery log as events */
+#undef STREAM_COMPAT		/* Not needed - potentially messy */
+#undef CONNECT_INDIC_KICK	/* Might mess IrDA, not needed */
+#undef FAIL_SEND_DISCONNECT	/* Might mess IrDA, not needed */
+#undef PASS_CONNECT_PACKETS	/* Not needed ? Safe */
+#undef MISSING_PPP_API		/* Stuff I wish I could do */
+
+/* PPP side of the business */
+#define BLOCK_WHEN_CONNECT	/* Block packets when connecting */
+#define CONNECT_IN_SEND		/* Retry IrDA connection procedure */
+#undef FLUSH_TO_PPP		/* Not sure about this one, let's play safe */
+#undef SECURE_DEVIRNET		/* Bah... */
+
+/****************************** DEBUG ******************************/
+
+/*
+ * This set of flags enable and disable all the various warning,
+ * error and debug message of this driver.
+ * Each section can be enabled and disabled independently
+ */
+/* In the PPP part */
+#define DEBUG_CTRL_TRACE	0	/* Control channel */
+#define DEBUG_CTRL_INFO		0	/* various info */
+#define DEBUG_CTRL_ERROR	1	/* problems */
+#define DEBUG_FS_TRACE		0	/* filesystem callbacks */
+#define DEBUG_FS_INFO		0	/* various info */
+#define DEBUG_FS_ERROR		1	/* problems */
+#define DEBUG_PPP_TRACE		0	/* PPP related functions */
+#define DEBUG_PPP_INFO		0	/* various info */
+#define DEBUG_PPP_ERROR		1	/* problems */
+#define DEBUG_MODULE_TRACE	0	/* module insertion/removal */
+#define DEBUG_MODULE_ERROR	1	/* problems */
+
+/* In the IrDA part */
+#define DEBUG_IRDA_SR_TRACE	0	/* IRDA subroutines */
+#define DEBUG_IRDA_SR_INFO	0	/* various info */
+#define DEBUG_IRDA_SR_ERROR	1	/* problems */
+#define DEBUG_IRDA_SOCK_TRACE	0	/* IRDA main socket functions */
+#define DEBUG_IRDA_SOCK_INFO	0	/* various info */
+#define DEBUG_IRDA_SOCK_ERROR	1	/* problems */
+#define DEBUG_IRDA_SERV_TRACE	0	/* The IrNET server */
+#define DEBUG_IRDA_SERV_INFO	0	/* various info */
+#define DEBUG_IRDA_SERV_ERROR	1	/* problems */
+#define DEBUG_IRDA_TCB_TRACE	0	/* IRDA IrTTP callbacks */
+#define DEBUG_IRDA_CB_INFO	0	/* various info */
+#define DEBUG_IRDA_CB_ERROR	1	/* problems */
+#define DEBUG_IRDA_OCB_TRACE	0	/* IRDA other callbacks */
+#define DEBUG_IRDA_OCB_INFO	0	/* various info */
+#define DEBUG_IRDA_OCB_ERROR	1	/* problems */
+
+#define DEBUG_ASSERT		0	/* Verify all assertions */
+
+/* 
+ * These are the macros we are using to actually print the debug
+ * statements. Don't look at it, it's ugly...
+ *
+ * One of the trick is that, as the DEBUG_XXX are constant, the
+ * compiler will optimise away the if() in all cases.
+ */
+/* All error messages (will show up in the normal logs) */
+#define DERROR(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_INFO "irnet: %s(): " format, __FUNCTION__ , ##args);}
+
+/* Normal debug message (will show up in /var/log/debug) */
+#define DEBUG(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: %s(): " format, __FUNCTION__ , ##args);}
+
+/* Entering a function (trace) */
+#define DENTER(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: -> %s" format, __FUNCTION__ , ##args);}
+
+/* Entering and exiting a function in one go (trace) */
+#define DPASS(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: <>%s" format, __FUNCTION__ , ##args);}
+
+/* Exiting a function (trace) */
+#define DEXIT(dbg, format, args...) \
+	{if(DEBUG_##dbg) \
+		printk(KERN_DEBUG "irnet: <-%s()" format, __FUNCTION__ , ##args);}
+
+/* Exit a function with debug */
+#define DRETURN(ret, dbg, args...) \
+	{DEXIT(dbg, ": " args);\
+	return ret; }
+
+/* Exit a function on failed condition */
+#define DABORT(cond, ret, dbg, args...) \
+	{if(cond) {\
+		DERROR(dbg, args);\
+		return ret; }}
+
+/* Invalid assertion, print out an error and exit... */
+#define DASSERT(cond, ret, dbg, args...) \
+	{if((DEBUG_ASSERT) && !(cond)) {\
+		DERROR(dbg, "Invalid assertion: " args);\
+		return ret; }}
+
+/************************ CONSTANTS & MACROS ************************/
+
+/* Paranoia */
+#define IRNET_MAGIC	0xB00754
+
+/* Number of control events in the control channel buffer... */
+#define IRNET_MAX_EVENTS	8	/* Should be more than enough... */
+
+/****************************** TYPES ******************************/
+
+/*
+ * This is the main structure where we store all the data pertaining to
+ * one instance of irnet.
+ * Note : in irnet functions, a pointer this structure is usually called
+ * "ap" or "self". If the code is borrowed from the IrDA stack, it tend
+ * to be called "self", and if it is borrowed from the PPP driver it is
+ * "ap". Apart from that, it's exactly the same structure ;-)
+ */
+typedef struct irnet_socket
+{
+  /* ------------------- Instance management ------------------- */
+  /* We manage a linked list of IrNET socket instances */
+  irda_queue_t		q;		/* Must be first - for hasbin */
+  int			magic;		/* Paranoia */
+
+  /* --------------------- FileSystem part --------------------- */
+  /* "pppd" interact directly with us on a /dev/ file */
+  struct file *		file;		/* File descriptor of this instance */
+  /* TTY stuff - to keep "pppd" happy */
+  struct termios	termios;	/* Various tty flags */
+  /* Stuff for the control channel */
+  int			event_index;	/* Last read in the event log */
+
+  /* ------------------------- PPP part ------------------------- */
+  /* We interface directly to the ppp_generic driver in the kernel */
+  int			ppp_open;	/* registered with ppp_generic */
+  struct ppp_channel	chan;		/* Interface to generic ppp layer */
+
+  int			mru;		/* Max size of PPP payload */
+  u32			xaccm[8];	/* Asynchronous character map (just */
+  u32			raccm;		/* to please pppd - dummy) */
+  unsigned int		flags;		/* PPP flags (compression, ...) */
+  unsigned int		rbits;		/* Unused receive flags ??? */
+
+  /* ------------------------ IrTTP part ------------------------ */
+  /* We create a pseudo "socket" over the IrDA tranport */
+  unsigned long		ttp_open;	/* Set when IrTTP is ready */
+  unsigned long		ttp_connect;	/* Set when IrTTP is connecting */
+  struct tsap_cb *	tsap;		/* IrTTP instance (the connection) */
+
+  char			rname[NICKNAME_MAX_LEN + 1];
+					/* IrDA nickname of destination */
+  __u32			rdaddr;		/* Requested peer IrDA address */
+  __u32			rsaddr;		/* Requested local IrDA address */
+  __u32			daddr;		/* actual peer IrDA address */
+  __u32			saddr;		/* my local IrDA address */
+  __u8			dtsap_sel;	/* Remote TSAP selector */
+  __u8			stsap_sel;	/* Local TSAP selector */
+
+  __u32			max_sdu_size_rx;/* Socket parameters used for IrTTP */
+  __u32			max_sdu_size_tx;
+  __u32			max_data_size;
+  __u8			max_header_size;
+  LOCAL_FLOW		tx_flow;	/* State of the Tx path in IrTTP */
+
+  /* ------------------- IrLMP and IrIAS part ------------------- */
+  /* Used for IrDA Discovery and socket name resolution */
+  void *		ckey;		/* IrLMP client handle */
+  __u16			mask;		/* Hint bits mask (filter discov.)*/
+  int			nslots;		/* Number of slots for discovery */
+
+  struct iriap_cb *	iriap;		/* Used to query remote IAS */
+  int			errno;		/* status of the IAS query */
+
+  /* -------------------- Discovery log part -------------------- */
+  /* Used by initial discovery on the control channel
+   * and by irnet_discover_daddr_and_lsap_sel() */
+  struct irda_device_info *discoveries;	/* Copy of the discovery log */
+  int			disco_index;	/* Last read in the discovery log */
+  int			disco_number;	/* Size of the discovery log */
+
+} irnet_socket;
+
+/*
+ * This is the various event that we will generate on the control channel
+ */
+typedef enum irnet_event
+{
+  IRNET_DISCOVER,		/* New IrNET node discovered */
+  IRNET_EXPIRE,			/* IrNET node expired */
+  IRNET_CONNECT_TO,		/* IrNET socket has connected to other node */
+  IRNET_CONNECT_FROM,		/* Other node has connected to IrNET socket */
+  IRNET_REQUEST_FROM,		/* Non satisfied connection request */
+  IRNET_NOANSWER_FROM,		/* Failed connection request */
+  IRNET_BLOCKED_LINK,		/* Link (IrLAP) is blocked for > 3s */
+  IRNET_DISCONNECT_FROM,	/* IrNET socket has disconnected */
+  IRNET_DISCONNECT_TO		/* Closing IrNET socket */
+} irnet_event;
+
+/*
+ * This is the storage for an event and its arguments
+ */
+typedef struct irnet_log
+{
+  irnet_event	event;
+  int		unit;
+  __u32		saddr;
+  __u32		daddr;
+  char		name[NICKNAME_MAX_LEN + 1];	/* 21 + 1 */
+  __u16_host_order hints;			/* Discovery hint bits */
+} irnet_log;
+
+/*
+ * This is the storage for all events and related stuff...
+ */
+typedef struct irnet_ctrl_channel
+{
+  irnet_log	log[IRNET_MAX_EVENTS];	/* Event log */
+  int		index;		/* Current index in log */
+  spinlock_t	spinlock;	/* Serialize access to the event log */
+  wait_queue_head_t	rwait;	/* processes blocked on read (or poll) */
+} irnet_ctrl_channel;
+
+/**************************** PROTOTYPES ****************************/
+/*
+ * Global functions of the IrNET module
+ * Note : we list here also functions called from one file to the other.
+ */
+
+/* -------------------------- IRDA PART -------------------------- */
+extern int
+	irda_irnet_create(irnet_socket *);	/* Initialise a IrNET socket */
+extern int
+	irda_irnet_connect(irnet_socket *);	/* Try to connect over IrDA */
+extern void
+	irda_irnet_destroy(irnet_socket *);	/* Teardown  a IrNET socket */
+extern int
+	irda_irnet_init(void);		/* Initialise IrDA part of IrNET */
+extern void
+	irda_irnet_cleanup(void);	/* Teardown IrDA part of IrNET */
+/* ---------------------------- MODULE ---------------------------- */
+extern int
+	irnet_init(void);		/* Initialise IrNET module */
+
+/**************************** VARIABLES ****************************/
+
+/* Control channel stuff - allocated in irnet_irda.h */
+extern struct irnet_ctrl_channel	irnet_events;
+
+#endif /* IRNET_H */