summaryrefslogtreecommitdiffstats
path: root/net/hsr/Kconfig
diff options
context:
space:
mode:
authorArvid Brodin <Arvid.Brodin@xdin.com>2013-10-30 21:10:47 +0100
committerDavid S. Miller <davem@davemloft.net>2013-11-03 23:20:14 -0500
commitf421436a591d34fa5279b54a96ac07d70250cc8d (patch)
treef5435cfb8877fd029dce3bdb617fae090711316f /net/hsr/Kconfig
parent74d332c13b2148ae934ea94dac1745ae92efe8e5 (diff)
downloadop-kernel-dev-f421436a591d34fa5279b54a96ac07d70250cc8d.zip
op-kernel-dev-f421436a591d34fa5279b54a96ac07d70250cc8d.tar.gz
net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)
High-availability Seamless Redundancy ("HSR") provides instant failover redundancy for Ethernet networks. It requires a special network topology where all nodes are connected in a ring (each node having two physical network interfaces). It is suited for applications that demand high availability and very short reaction time. HSR acts on the Ethernet layer, using a registered Ethernet protocol type to send special HSR frames in both directions over the ring. The driver creates virtual network interfaces that can be used just like any ordinary Linux network interface, for IP/TCP/UDP traffic etc. All nodes in the network ring must be HSR capable. This code is a "best effort" to comply with the HSR standard as described in IEC 62439-3:2010 (HSRv0). Signed-off-by: Arvid Brodin <arvid.brodin@xdin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/hsr/Kconfig')
-rw-r--r--net/hsr/Kconfig27
1 files changed, 27 insertions, 0 deletions
diff --git a/net/hsr/Kconfig b/net/hsr/Kconfig
new file mode 100644
index 0000000..0d3d709
--- /dev/null
+++ b/net/hsr/Kconfig
@@ -0,0 +1,27 @@
+#
+# IEC 62439-3 High-availability Seamless Redundancy
+#
+
+config HSR
+ tristate "High-availability Seamless Redundancy (HSR)"
+ ---help---
+ If you say Y here, then your Linux box will be able to act as a
+ DANH ("Doubly attached node implementing HSR"). For this to work,
+ your Linux box needs (at least) two physical Ethernet interfaces,
+ and it must be connected as a node in a ring network together with
+ other HSR capable nodes.
+
+ All Ethernet frames sent over the hsr device will be sent in both
+ directions on the ring (over both slave ports), giving a redundant,
+ instant fail-over network. Each HSR node in the ring acts like a
+ bridge for HSR frames, but filters frames that have been forwarded
+ earlier.
+
+ This code is a "best effort" to comply with the HSR standard as
+ described in IEC 62439-3:2010 (HSRv0), but no compliancy tests have
+ been made.
+
+ You need to perform any and all necessary tests yourself before
+ relying on this code in a safety critical system!
+
+ If unsure, say N.
OpenPOWER on IntegriCloud