summaryrefslogtreecommitdiffstats
path: root/net/dsa
diff options
context:
space:
mode:
authorFlorian Fainelli <f.fainelli@gmail.com>2015-03-10 16:57:13 -0700
committerDavid S. Miller <davem@davemloft.net>2015-03-11 17:56:29 -0400
commitcd28a1a9baee7674779e46072e5dbbb6215c3c8c (patch)
tree8a95d055d050729f032427f458d6c9a7ef7eef08 /net/dsa
parentc305c1651cb20f00d272db1615d39513365f2097 (diff)
downloadop-kernel-dev-cd28a1a9baee7674779e46072e5dbbb6215c3c8c.zip
op-kernel-dev-cd28a1a9baee7674779e46072e5dbbb6215c3c8c.tar.gz
net: dsa: fully divert PHY reads/writes if requested
In case a PHY is found via Device Tree, and is also flagged by the switch driver as needing indirect reads/writes using the switch driver implemented MDIO bus, make sure that we bind this PHY to the slave MII bus in order for this to happen. Without this, we would succeed in having the PHY driver probe()'s function to use slave MII bus read/write functions, because this is done during dsa_slave_mii_init(), but past that point, the PHY driver would not go through these diverted reads and writes. Fixes: 0d8bcdd383b88 ("net: dsa: allow for more complex PHY setups") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/dsa')
-rw-r--r--net/dsa/slave.c29
1 files changed, 22 insertions, 7 deletions
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 19bc2b3..188b697 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -618,11 +618,12 @@ static int dsa_slave_fixed_link_update(struct net_device *dev,
/* slave device setup *******************************************************/
static int dsa_slave_phy_connect(struct dsa_slave_priv *p,
- struct net_device *slave_dev)
+ struct net_device *slave_dev,
+ int addr)
{
struct dsa_switch *ds = p->parent;
- p->phy = ds->slave_mii_bus->phy_map[p->port];
+ p->phy = ds->slave_mii_bus->phy_map[addr];
if (!p->phy)
return -ENODEV;
@@ -667,10 +668,24 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
if (ds->drv->get_phy_flags)
phy_flags = ds->drv->get_phy_flags(ds, p->port);
- if (phy_dn)
- p->phy = of_phy_connect(slave_dev, phy_dn,
- dsa_slave_adjust_link, phy_flags,
- p->phy_interface);
+ if (phy_dn) {
+ ret = of_mdio_parse_addr(&slave_dev->dev, phy_dn);
+ /* If this PHY address is part of phys_mii_mask, which means
+ * that we need to divert reads and writes to/from it, then we
+ * want to bind this device using the slave MII bus created by
+ * DSA to make that happen.
+ */
+ if (ret >= 0 && (ds->phys_mii_mask & (1 << ret))) {
+ ret = dsa_slave_phy_connect(p, slave_dev, ret);
+ if (ret)
+ return ret;
+ } else {
+ p->phy = of_phy_connect(slave_dev, phy_dn,
+ dsa_slave_adjust_link,
+ phy_flags,
+ p->phy_interface);
+ }
+ }
if (p->phy && phy_is_fixed)
fixed_phy_set_link_update(p->phy, dsa_slave_fixed_link_update);
@@ -679,7 +694,7 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
* MDIO bus instead
*/
if (!p->phy) {
- ret = dsa_slave_phy_connect(p, slave_dev);
+ ret = dsa_slave_phy_connect(p, slave_dev, p->port);
if (ret)
return ret;
} else {
OpenPOWER on IntegriCloud