[DCCP]: Factor out common code for generating Resets

This factors code common to dccp_v{4,6}_ctl_send_reset into a separate function,
and adds support for filling in the Data 1 ... Data 3 fields from RFC 4340, 5.6.

It is useful to have this separate, since the following Reset codes will always
be generated from the control socket rather than via dccp_send_reset:
 * Code 3, "No Connection", cf. 8.3.1;
 * Code 4, "Packet Error" (identification for Data 1 added);
 * Code 5, "Option Error" (identification for Data 1..3 added, will be used later);
 * Code 6, "Mandatory Error" (same as Option Error);
 * Code 7, "Connection Refused" (what on Earth is the difference to "No Connection"?);
 * Code 8, "Bad Service Code";
 * Code 9, "Too Busy";
 * Code 10, "Bad Init Cookie" (not used).

Code 0 is not recommended by the RFC, the following codes would be used in
dccp_send_reset() instead, since they all relate to an established DCCP connection:
 * Code 1, "Closed";
 * Code 2, "Aborted";
 * Code 11, "Aggression Penalty" (12.3).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

1 files changed, 6 insertions, 33 deletions

diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index d954e83..b7c0f66 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -301,50 +301,23 @@ static void dccp_v6_reqsk_destructor(struct request_sock *req)
 
 static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 {
-	struct dccp_hdr *rxdh = dccp_hdr(rxskb), *dh;
 	struct ipv6hdr *rxip6h;
-	const u32 dccp_hdr_reset_len = sizeof(struct dccp_hdr) +
-				       sizeof(struct dccp_hdr_ext) +
-				       sizeof(struct dccp_hdr_reset);
 	struct sk_buff *skb;
 	struct flowi fl;
-	u64 seqno = 0;
 
-	if (rxdh->dccph_type == DCCP_PKT_RESET)
+	if (dccp_hdr(rxskb)->dccph_type == DCCP_PKT_RESET)
 		return;
 
 	if (!ipv6_unicast_destination(rxskb))
 		return;
 
-	skb = alloc_skb(dccp_v6_ctl_socket->sk->sk_prot->max_header,
-			GFP_ATOMIC);
+	skb = dccp_ctl_make_reset(dccp_v6_ctl_socket, rxskb);
 	if (skb == NULL)
 		return;
 
-	skb_reserve(skb, dccp_v6_ctl_socket->sk->sk_prot->max_header);
-
-	dh = dccp_zeroed_hdr(skb, dccp_hdr_reset_len);
-
-	/* Swap the send and the receive. */
-	dh->dccph_type	= DCCP_PKT_RESET;
-	dh->dccph_sport	= rxdh->dccph_dport;
-	dh->dccph_dport	= rxdh->dccph_sport;
-	dh->dccph_doff	= dccp_hdr_reset_len / 4;
-	dh->dccph_x	= 1;
-	dccp_hdr_reset(skb)->dccph_reset_code =
-				DCCP_SKB_CB(rxskb)->dccpd_reset_code;
-
-	/* See "8.3.1. Abnormal Termination" in RFC 4340 */
-	if (DCCP_SKB_CB(rxskb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ)
-		seqno = ADD48(DCCP_SKB_CB(rxskb)->dccpd_ack_seq, 1);
-
-	dccp_hdr_set_seq(dh, seqno);
-	dccp_hdr_set_ack(dccp_hdr_ack_bits(skb), DCCP_SKB_CB(rxskb)->dccpd_seq);
-
-	dccp_csum_outgoing(skb);
 	rxip6h = ipv6_hdr(rxskb);
-	dh->dccph_checksum = dccp_v6_csum_finish(skb, &rxip6h->saddr,
-						      &rxip6h->daddr);
+	dccp_hdr(skb)->dccph_checksum = dccp_v6_csum_finish(skb, &rxip6h->saddr,
+							    &rxip6h->daddr);
 
 	memset(&fl, 0, sizeof(fl));
 	ipv6_addr_copy(&fl.fl6_dst, &rxip6h->saddr);
@@ -352,8 +325,8 @@ static void dccp_v6_ctl_send_reset(struct sock *sk, struct sk_buff *rxskb)
 
 	fl.proto = IPPROTO_DCCP;
 	fl.oif = inet6_iif(rxskb);
-	fl.fl_ip_dport = dh->dccph_dport;
-	fl.fl_ip_sport = dh->dccph_sport;
+	fl.fl_ip_dport = dccp_hdr(skb)->dccph_dport;
+	fl.fl_ip_sport = dccp_hdr(skb)->dccph_sport;
 	security_skb_classify_flow(rxskb, &fl);
 
 	/* sk = NULL, but it is safe for now. RST socket required. */