summaryrefslogtreecommitdiffstats
path: root/net/Kconfig
diff options
context:
space:
mode:
authorSam Ravnborg <sam@ravnborg.org>2005-07-11 21:13:56 -0700
committerDavid S. Miller <davem@davemloft.net>2005-07-11 21:13:56 -0700
commit6a2e9b738cb5c929df73b6acabdd8f9a4e9a0416 (patch)
treec7cdf9033093b52e360ad04dc29739ca36a617a4 /net/Kconfig
parentd5950b4355049092739bea97d1bdc14433126cc5 (diff)
downloadop-kernel-dev-6a2e9b738cb5c929df73b6acabdd8f9a4e9a0416.zip
op-kernel-dev-6a2e9b738cb5c929df73b6acabdd8f9a4e9a0416.tar.gz
[NET]: move config options out to individual protocols
Move the protocol specific config options out to the specific protocols. With this change net/Kconfig now starts to become readable and serve as a good basis for further re-structuring. The menu structure is left almost intact, except that indention is fixed in most cases. Most visible are the INET changes where several "depends on INET" are replaced with a single ifdef INET / endif pair. Several new files were created to accomplish this change - they are small but serve the purpose that config options are now distributed out where they belongs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/Kconfig')
-rw-r--r--net/Kconfig446
1 files changed, 17 insertions, 429 deletions
diff --git a/net/Kconfig b/net/Kconfig
index f46fc32..2684e80 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -22,57 +22,14 @@ config NET
recommended to read the NET-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
-menu "Networking options"
- depends on NET
-
-config PACKET
- tristate "Packet socket"
- ---help---
- The Packet protocol is used by applications which communicate
- directly with network devices without an intermediate network
- protocol implemented in the kernel, e.g. tcpdump. If you want them
- to work, choose Y.
-
- To compile this driver as a module, choose M here: the module will
- be called af_packet.
-
- If unsure, say Y.
+# Make sure that all config symbols are dependent on NET
+if NET
-config PACKET_MMAP
- bool "Packet socket: mmapped IO"
- depends on PACKET
- help
- If you say Y here, the Packet protocol driver will use an IO
- mechanism that results in faster communication.
-
- If unsure, say N.
-
-config UNIX
- tristate "Unix domain sockets"
- ---help---
- If you say Y here, you will include support for Unix domain sockets;
- sockets are the standard Unix mechanism for establishing and
- accessing network connections. Many commonly used programs such as
- the X Window system and syslog use these sockets even if your
- machine is not connected to any network. Unless you are working on
- an embedded system or something similar, you therefore definitely
- want to say Y here.
-
- To compile this driver as a module, choose M here: the module will be
- called unix. Note that several important services won't work
- correctly if you say M here and then neglect to load the module.
-
- Say Y unless you know what you are doing.
-
-config NET_KEY
- tristate "PF_KEY sockets"
- select XFRM
- ---help---
- PF_KEYv2 socket family, compatible to KAME ones.
- They are required if you are going to use IPsec tools ported
- from KAME.
+menu "Networking options"
- Say Y unless you know what you are doing.
+source "net/packet/Kconfig"
+source "net/unix/Kconfig"
+source "net/xfrm/Kconfig"
config INET
bool "TCP/IP networking"
@@ -96,30 +53,12 @@ config INET
Short answer: say Y.
+if INET
source "net/ipv4/Kconfig"
-
-# IPv6 as module will cause a CRASH if you try to unload it
-config IPV6
- tristate "The IPv6 protocol"
- depends on INET
- default m
- select CRYPTO if IPV6_PRIVACY
- select CRYPTO_MD5 if IPV6_PRIVACY
- ---help---
- This is complemental support for the IP version 6.
- You will still be able to do traditional IPv4 networking as well.
-
- For general information about IPv6, see
- <http://playground.sun.com/pub/ipng/html/ipng-main.html>.
- For Linux IPv6 development information, see <http://www.linux-ipv6.org>.
- For specific information about IPv6 under Linux, read the HOWTO at
- <http://www.bieringer.de/linux/IPv6/>.
-
- To compile this protocol support as a module, choose M here: the
- module will be called ipv6.
-
source "net/ipv6/Kconfig"
+endif # if INET
+
menuconfig NETFILTER
bool "Network packet filtering (replaces ipchains)"
---help---
@@ -208,269 +147,16 @@ source "net/bridge/netfilter/Kconfig"
endif
-config XFRM
- bool
- depends on NET
-
-source "net/xfrm/Kconfig"
-
source "net/sctp/Kconfig"
-
-config ATM
- tristate "Asynchronous Transfer Mode (ATM) (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- ---help---
- ATM is a high-speed networking technology for Local Area Networks
- and Wide Area Networks. It uses a fixed packet size and is
- connection oriented, allowing for the negotiation of minimum
- bandwidth requirements.
-
- In order to participate in an ATM network, your Linux box needs an
- ATM networking card. If you have that, say Y here and to the driver
- of your ATM card below.
-
- Note that you need a set of user-space programs to actually make use
- of ATM. See the file <file:Documentation/networking/atm.txt> for
- further details.
-
-config ATM_CLIP
- tristate "Classical IP over ATM (EXPERIMENTAL)"
- depends on ATM && INET
- help
- Classical IP over ATM for PVCs and SVCs, supporting InARP and
- ATMARP. If you want to communication with other IP hosts on your ATM
- network, you will typically either say Y here or to "LAN Emulation
- (LANE)" below.
-
-config ATM_CLIP_NO_ICMP
- bool "Do NOT send ICMP if no neighbour (EXPERIMENTAL)"
- depends on ATM_CLIP
- help
- Normally, an "ICMP host unreachable" message is sent if a neighbour
- cannot be reached because there is no VC to it in the kernel's
- ATMARP table. This may cause problems when ATMARP table entries are
- briefly removed during revalidation. If you say Y here, packets to
- such neighbours are silently discarded instead.
-
-config ATM_LANE
- tristate "LAN Emulation (LANE) support (EXPERIMENTAL)"
- depends on ATM
- help
- LAN Emulation emulates services of existing LANs across an ATM
- network. Besides operating as a normal ATM end station client, Linux
- LANE client can also act as an proxy client bridging packets between
- ELAN and Ethernet segments. You need LANE if you want to try MPOA.
-
-config ATM_MPOA
- tristate "Multi-Protocol Over ATM (MPOA) support (EXPERIMENTAL)"
- depends on ATM && INET && ATM_LANE!=n
- help
- Multi-Protocol Over ATM allows ATM edge devices such as routers,
- bridges and ATM attached hosts establish direct ATM VCs across
- subnetwork boundaries. These shortcut connections bypass routers
- enhancing overall network performance.
-
-config ATM_BR2684
- tristate "RFC1483/2684 Bridged protocols"
- depends on ATM && INET
- help
- ATM PVCs can carry ethernet PDUs according to RFC2684 (formerly 1483)
- This device will act like an ethernet from the kernels point of view,
- with the traffic being carried by ATM PVCs (currently 1 PVC/device).
- This is sometimes used over DSL lines. If in doubt, say N.
-
-config ATM_BR2684_IPFILTER
- bool "Per-VC IP filter kludge"
- depends on ATM_BR2684
- help
- This is an experimental mechanism for users who need to terminate a
- large number of IP-only vcc's. Do not enable this unless you are sure
- you know what you are doing.
-
-config BRIDGE
- tristate "802.1d Ethernet Bridging"
- ---help---
- If you say Y here, then your Linux box will be able to act as an
- Ethernet bridge, which means that the different Ethernet segments it
- is connected to will appear as one Ethernet to the participants.
- Several such bridges can work together to create even larger
- networks of Ethernets using the IEEE 802.1 spanning tree algorithm.
- As this is a standard, Linux bridges will cooperate properly with
- other third party bridge products.
-
- In order to use the Ethernet bridge, you'll need the bridge
- configuration tools; see <file:Documentation/networking/bridge.txt>
- for location. Please read the Bridge mini-HOWTO for more
- information.
-
- If you enable iptables support along with the bridge support then you
- turn your bridge into a bridging IP firewall.
- iptables will then see the IP packets being bridged, so you need to
- take this into account when setting up your firewall rules.
- Enabling arptables support when bridging will let arptables see
- bridged ARP traffic in the arptables FORWARD chain.
-
- To compile this code as a module, choose M here: the module
- will be called bridge.
-
- If unsure, say N.
-
-config VLAN_8021Q
- tristate "802.1Q VLAN Support"
- ---help---
- Select this and you will be able to create 802.1Q VLAN interfaces
- on your ethernet interfaces. 802.1Q VLAN supports almost
- everything a regular ethernet interface does, including
- firewalling, bridging, and of course IP traffic. You will need
- the 'vconfig' tool from the VLAN project in order to effectively
- use VLANs. See the VLAN web page for more information:
- <http://www.candelatech.com/~greear/vlan.html>
-
- To compile this code as a module, choose M here: the module
- will be called 8021q.
-
- If unsure, say N.
-
-config DECNET
- tristate "DECnet Support"
- ---help---
- The DECnet networking protocol was used in many products made by
- Digital (now Compaq). It provides reliable stream and sequenced
- packet communications over which run a variety of services similar
- to those which run over TCP/IP.
-
- To find some tools to use with the kernel layer support, please
- look at Patrick Caulfield's web site:
- <http://linux-decnet.sourceforge.net/>.
-
- More detailed documentation is available in
- <file:Documentation/networking/decnet.txt>.
-
- Be sure to say Y to "/proc file system support" and "Sysctl support"
- below when using DECnet, since you will need sysctl support to aid
- in configuration at run time.
-
- The DECnet code is also available as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module is called decnet.
-
+source "net/atm/Kconfig"
+source "net/bridge/Kconfig"
+source "net/8021q/Kconfig"
source "net/decnet/Kconfig"
-
source "net/llc/Kconfig"
-
-config IPX
- tristate "The IPX protocol"
- select LLC
- ---help---
- This is support for the Novell networking protocol, IPX, commonly
- used for local networks of Windows machines. You need it if you
- want to access Novell NetWare file or print servers using the Linux
- Novell client ncpfs (available from
- <ftp://platan.vc.cvut.cz/pub/linux/ncpfs/>) or from
- within the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>). In order
- to do the former, you'll also have to say Y to "NCP file system
- support", below.
-
- IPX is similar in scope to IP, while SPX, which runs on top of IPX,
- is similar to TCP. There is also experimental support for SPX in
- Linux (see "SPX networking", below).
-
- To turn your Linux box into a fully featured NetWare file server and
- IPX router, say Y here and fetch either lwared from
- <ftp://ibiblio.org/pub/Linux/system/network/daemons/> or
- mars_nwe from <ftp://www.compu-art.de/mars_nwe/>. For more
- information, read the IPX-HOWTO available from
- <http://www.tldp.org/docs.html#howto>.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- The IPX driver would enlarge your kernel by about 16 KB. To compile
- this driver as a module, choose M here: the module will be called ipx.
- Unless you want to integrate your Linux box with a local Novell
- network, say N.
-
source "net/ipx/Kconfig"
-
-config ATALK
- tristate "Appletalk protocol support"
- select LLC
- ---help---
- AppleTalk is the protocol that Apple computers can use to communicate
- on a network. If your Linux box is connected to such a network and you
- wish to connect to it, say Y. You will need to use the netatalk package
- so that your Linux box can act as a print and file server for Macs as
- well as access AppleTalk printers. Check out
- <http://www.zettabyte.net/netatalk/> on the WWW for details.
- EtherTalk is the name used for AppleTalk over Ethernet and the
- cheaper and slower LocalTalk is AppleTalk over a proprietary Apple
- network using serial links. EtherTalk and LocalTalk are fully
- supported by Linux.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The
- NET-3-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, contains valuable
- information as well.
-
- To compile this driver as a module, choose M here: the module will be
- called appletalk. You almost certainly want to compile it as a
- module so you can restart your AppleTalk stack without rebooting
- your machine. I hear that the GNU boycott of Apple is over, so
- even politically correct people are allowed to say Y here.
-
source "drivers/net/appletalk/Kconfig"
-
-config X25
- tristate "CCITT X.25 Packet Layer (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- ---help---
- X.25 is a set of standardized network protocols, similar in scope to
- frame relay; the one physical line from your box to the X.25 network
- entry point can carry several logical point-to-point connections
- (called "virtual circuits") to other computers connected to the X.25
- network. Governments, banks, and other organizations tend to use it
- to connect to each other or to form Wide Area Networks (WANs). Many
- countries have public X.25 networks. X.25 consists of two
- protocols: the higher level Packet Layer Protocol (PLP) (say Y here
- if you want that) and the lower level data link layer protocol LAPB
- (say Y to "LAPB Data Link Driver" below if you want that).
-
- You can read more about X.25 at <http://www.sangoma.com/x25.htm> and
- <http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/cbook/cx25.htm>.
- Information about X.25 for Linux is contained in the files
- <file:Documentation/networking/x25.txt> and
- <file:Documentation/networking/x25-iface.txt>.
-
- One connects to an X.25 network either with a dedicated network card
- using the X.21 protocol (not yet supported by Linux) or one can do
- X.25 over a standard telephone line using an ordinary modem (say Y
- to "X.25 async driver" below) or over Ethernet using an ordinary
- Ethernet card and the LAPB over Ethernet (say Y to "LAPB Data Link
- Driver" and "LAPB over Ethernet driver" below).
-
- To compile this driver as a module, choose M here: the module
- will be called x25. If unsure, say N.
-
-config LAPB
- tristate "LAPB Data Link Driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- ---help---
- Link Access Procedure, Balanced (LAPB) is the data link layer (i.e.
- the lower) part of the X.25 protocol. It offers a reliable
- connection service to exchange data frames with one other host, and
- it is used to transport higher level protocols (mostly X.25 Packet
- Layer, the higher part of X.25, but others are possible as well).
- Usually, LAPB is used with specialized X.21 network cards, but Linux
- currently supports LAPB only over Ethernet connections. If you want
- to use LAPB connections over Ethernet, say Y here and to "LAPB over
- Ethernet driver" below. Read
- <file:Documentation/networking/lapb-module.txt> for technical
- details.
-
- To compile this driver as a module, choose M here: the
- module will be called lapb. If unsure, say N.
+source "net/x25/Kconfig"
+source "net/lapb/Kconfig"
config NET_DIVERT
bool "Frame Diverter (EXPERIMENTAL)"
@@ -498,107 +184,10 @@ config NET_DIVERT
If unsure, say N.
-config ECONET
- tristate "Acorn Econet/AUN protocols (EXPERIMENTAL)"
- depends on EXPERIMENTAL && INET
- ---help---
- Econet is a fairly old and slow networking protocol mainly used by
- Acorn computers to access file and print servers. It uses native
- Econet network cards. AUN is an implementation of the higher level
- parts of Econet that runs over ordinary Ethernet connections, on
- top of the UDP packet protocol, which in turn runs on top of the
- Internet protocol IP.
-
- If you say Y here, you can choose with the next two options whether
- to send Econet/AUN traffic over a UDP Ethernet connection or over
- a native Econet network card.
-
- To compile this driver as a module, choose M here: the module
- will be called econet.
-
-config ECONET_AUNUDP
- bool "AUN over UDP"
- depends on ECONET
- help
- Say Y here if you want to send Econet/AUN traffic over a UDP
- connection (UDP is a packet based protocol that runs on top of the
- Internet protocol IP) using an ordinary Ethernet network card.
-
-config ECONET_NATIVE
- bool "Native Econet"
- depends on ECONET
- help
- Say Y here if you have a native Econet network card installed in
- your computer.
-
-config WAN_ROUTER
- tristate "WAN router"
- depends on EXPERIMENTAL
- ---help---
- Wide Area Networks (WANs), such as X.25, frame relay and leased
- lines, are used to interconnect Local Area Networks (LANs) over vast
- distances with data transfer rates significantly higher than those
- achievable with commonly used asynchronous modem connections.
- Usually, a quite expensive external device called a `WAN router' is
- needed to connect to a WAN.
-
- As an alternative, WAN routing can be built into the Linux kernel.
- With relatively inexpensive WAN interface cards available on the
- market, a perfectly usable router can be built for less than half
- the price of an external router. If you have one of those cards and
- wish to use your Linux box as a WAN router, say Y here and also to
- the WAN driver for your card, below. You will then need the
- wan-tools package which is available from <ftp://ftp.sangoma.com/>.
- Read <file:Documentation/networking/wan-router.txt> for more
- information.
-
- To compile WAN routing support as a module, choose M here: the
- module will be called wanrouter.
-
- If unsure, say N.
-
-menu "QoS and/or fair queueing"
-
-config NET_SCHED
- bool "QoS and/or fair queueing"
- ---help---
- When the kernel has several packets to send out over a network
- device, it has to decide which ones to send first, which ones to
- delay, and which ones to drop. This is the job of the packet
- scheduler, and several different algorithms for how to do this
- "fairly" have been proposed.
-
- If you say N here, you will get the standard packet scheduler, which
- is a FIFO (first come, first served). If you say Y here, you will be
- able to choose from among several alternative algorithms which can
- then be attached to different network devices. This is useful for
- example if some of your network devices are real time devices that
- need a certain minimum data flow rate, or if you need to limit the
- maximum data flow rate for traffic which matches specified criteria.
- This code is considered to be experimental.
-
- To administer these schedulers, you'll need the user-level utilities
- from the package iproute2+tc at <ftp://ftp.tux.org/pub/net/ip-routing/>.
- That package also contains some documentation; for more, check out
- <http://snafu.freedom.org/linux2.2/iproute-notes.html>.
-
- This Quality of Service (QoS) support will enable you to use
- Differentiated Services (diffserv) and Resource Reservation Protocol
- (RSVP) on your Linux router if you also say Y to "QoS support",
- "Packet classifier API" and to some classifiers below. Documentation
- and software is at <http://diffserv.sourceforge.net/>.
-
- If you say Y here and to "/proc file system" below, you will be able
- to read status information about packet schedulers from the file
- /proc/net/psched.
-
- The available schedulers are listed in the following questions; you
- can say Y to as many as you like. If unsure, say N now.
-
+source "net/econet/Kconfig"
+source "net/wanrouter/Kconfig"
source "net/sched/Kconfig"
-endmenu
-
menu "Network testing"
config NET_PKTGEN
@@ -637,10 +226,9 @@ config NET_POLL_CONTROLLER
def_bool NETPOLL
source "net/ax25/Kconfig"
-
source "net/irda/Kconfig"
-
source "net/bluetooth/Kconfig"
+endif # if NET
endmenu # Networking
OpenPOWER on IntegriCloud