Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

6 files changed, 2124 insertions, 0 deletions

diff --git a/net/8021q/Makefile b/net/8021q/Makefile
new file mode 100644
index 0000000..97feb44
--- /dev/null
+++ b/net/8021q/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Linux VLAN layer.
+#
+
+obj-$(CONFIG_VLAN_8021Q) += 8021q.o
+
+8021q-objs := vlan.o vlan_dev.o
+
+ifeq ($(CONFIG_PROC_FS),y)
+8021q-objs += vlanproc.o
+endif
+
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
new file mode 100644
index 0000000..1f6d316
--- /dev/null
+++ b/net/8021q/vlan.c
@@ -0,0 +1,774 @@
+/*
+ * INET		802.1Q VLAN
+ *		Ethernet-type device handling.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *              Please send support related email to: vlan@scry.wanfear.com
+ *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
+ * 
+ * Fixes:
+ *              Fix for packet capture - Nick Eggleston <nick@dccinc.com>;
+ *		Add HW acceleration hooks - David S. Miller <davem@redhat.com>;
+ *		Correct all the locking - David S. Miller <davem@redhat.com>;
+ *		Use hash table for VLAN groups - David S. Miller <davem@redhat.com>
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/uaccess.h> /* for copy_from_user */
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <net/datalink.h>
+#include <linux/mm.h>
+#include <linux/in.h>
+#include <linux/init.h>
+#include <net/p8022.h>
+#include <net/arp.h>
+#include <linux/rtnetlink.h>
+#include <linux/notifier.h>
+
+#include <linux/if_vlan.h>
+#include "vlan.h"
+#include "vlanproc.h"
+
+#define DRV_VERSION "1.8"
+
+/* Global VLAN variables */
+
+/* Our listing of VLAN group(s) */
+static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE];
+#define vlan_grp_hashfn(IDX)	((((IDX) >> VLAN_GRP_HASH_SHIFT) ^ (IDX)) & VLAN_GRP_HASH_MASK)
+
+static char vlan_fullname[] = "802.1Q VLAN Support";
+static char vlan_version[] = DRV_VERSION;
+static char vlan_copyright[] = "Ben Greear <greearb@candelatech.com>";
+static char vlan_buggyright[] = "David S. Miller <davem@redhat.com>";
+
+static int vlan_device_event(struct notifier_block *, unsigned long, void *);
+static int vlan_ioctl_handler(void __user *);
+static int unregister_vlan_dev(struct net_device *, unsigned short );
+
+static struct notifier_block vlan_notifier_block = {
+	.notifier_call = vlan_device_event,
+};
+
+/* These may be changed at run-time through IOCTLs */
+
+/* Determines interface naming scheme. */
+unsigned short vlan_name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD;
+
+static struct packet_type vlan_packet_type = {
+	.type = __constant_htons(ETH_P_8021Q),
+	.func = vlan_skb_recv, /* VLAN receive method */
+};
+
+/* Bits of netdev state that are propagated from real device to virtual */
+#define VLAN_LINK_STATE_MASK \
+	((1<<__LINK_STATE_PRESENT)|(1<<__LINK_STATE_NOCARRIER))
+
+/* End of global variables definitions. */
+
+/*
+ * Function vlan_proto_init (pro)
+ *
+ *    Initialize VLAN protocol layer, 
+ *
+ */
+static int __init vlan_proto_init(void)
+{
+	int err;
+
+	printk(VLAN_INF "%s v%s %s\n",
+	       vlan_fullname, vlan_version, vlan_copyright);
+	printk(VLAN_INF "All bugs added by %s\n",
+	       vlan_buggyright);
+
+	/* proc file system initialization */
+	err = vlan_proc_init();
+	if (err < 0) {
+		printk(KERN_ERR 
+		       "%s %s: can't create entry in proc filesystem!\n",
+		       __FUNCTION__, VLAN_NAME);
+		return err;
+	}
+
+	dev_add_pack(&vlan_packet_type);
+
+	/* Register us to receive netdevice events */
+	err = register_netdevice_notifier(&vlan_notifier_block);
+	if (err < 0) {
+		dev_remove_pack(&vlan_packet_type);
+		vlan_proc_cleanup();
+		return err;
+	}
+
+	vlan_ioctl_set(vlan_ioctl_handler);
+
+	return 0;
+}
+
+/* Cleanup all vlan devices 
+ * Note: devices that have been registered that but not
+ * brought up will exist but have no module ref count.
+ */
+static void __exit vlan_cleanup_devices(void)
+{
+	struct net_device *dev, *nxt;
+
+	rtnl_lock();
+	for (dev = dev_base; dev; dev = nxt) {
+		nxt = dev->next;
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
+					    VLAN_DEV_INFO(dev)->vlan_id);
+
+			unregister_netdevice(dev);
+		}
+	}
+	rtnl_unlock();
+}
+
+/*
+ *     Module 'remove' entry point.
+ *     o delete /proc/net/router directory and static entries.
+ */ 
+static void __exit vlan_cleanup_module(void)
+{
+	int i;
+
+	vlan_ioctl_set(NULL);
+
+	/* Un-register us from receiving netdevice events */
+	unregister_netdevice_notifier(&vlan_notifier_block);
+
+	dev_remove_pack(&vlan_packet_type);
+	vlan_cleanup_devices();
+
+	/* This table must be empty if there are no module
+	 * references left.
+	 */
+	for (i = 0; i < VLAN_GRP_HASH_SIZE; i++) {
+		BUG_ON(!hlist_empty(&vlan_group_hash[i]));
+	}
+	vlan_proc_cleanup();
+
+	synchronize_net();
+}
+
+module_init(vlan_proto_init);
+module_exit(vlan_cleanup_module);
+
+/* Must be invoked with RCU read lock (no preempt) */
+static struct vlan_group *__vlan_find_group(int real_dev_ifindex)
+{
+	struct vlan_group *grp;
+	struct hlist_node *n;
+	int hash = vlan_grp_hashfn(real_dev_ifindex);
+
+	hlist_for_each_entry_rcu(grp, n, &vlan_group_hash[hash], hlist) {
+		if (grp->real_dev_ifindex == real_dev_ifindex)
+			return grp;
+	}
+
+	return NULL;
+}
+
+/*  Find the protocol handler.  Assumes VID < VLAN_VID_MASK.
+ *
+ * Must be invoked with RCU read lock (no preempt)
+ */
+struct net_device *__find_vlan_dev(struct net_device *real_dev,
+				   unsigned short VID)
+{
+	struct vlan_group *grp = __vlan_find_group(real_dev->ifindex);
+
+	if (grp)
+                return grp->vlan_devices[VID];
+
+	return NULL;
+}
+
+static void vlan_rcu_free(struct rcu_head *rcu)
+{
+	kfree(container_of(rcu, struct vlan_group, rcu));
+}
+
+
+/* This returns 0 if everything went fine.
+ * It will return 1 if the group was killed as a result.
+ * A negative return indicates failure.
+ *
+ * The RTNL lock must be held.
+ */
+static int unregister_vlan_dev(struct net_device *real_dev,
+			       unsigned short vlan_id)
+{
+	struct net_device *dev = NULL;
+	int real_dev_ifindex = real_dev->ifindex;
+	struct vlan_group *grp;
+	int i, ret;
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: VID: %i\n", __FUNCTION__, vlan_id);
+#endif
+
+	/* sanity check */
+	if (vlan_id >= VLAN_VID_MASK)
+		return -EINVAL;
+
+	ASSERT_RTNL();
+	grp = __vlan_find_group(real_dev_ifindex);
+
+	ret = 0;
+
+	if (grp) {
+		dev = grp->vlan_devices[vlan_id];
+		if (dev) {
+			/* Remove proc entry */
+			vlan_proc_rem_dev(dev);
+
+			/* Take it out of our own structures, but be sure to
+			 * interlock with HW accelerating devices or SW vlan
+			 * input packet processing.
+			 */
+			if (real_dev->features &
+			    (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER)) {
+				real_dev->vlan_rx_kill_vid(real_dev, vlan_id);
+			}
+
+			grp->vlan_devices[vlan_id] = NULL;
+			synchronize_net();
+
+
+			/* Caller unregisters (and if necessary, puts)
+			 * VLAN device, but we get rid of the reference to
+			 * real_dev here.
+			 */
+			dev_put(real_dev);
+
+			/* If the group is now empty, kill off the
+			 * group.
+			 */
+			for (i = 0; i < VLAN_VID_MASK; i++)
+				if (grp->vlan_devices[i])
+					break;
+
+			if (i == VLAN_VID_MASK) {
+				if (real_dev->features & NETIF_F_HW_VLAN_RX)
+					real_dev->vlan_rx_register(real_dev, NULL);
+
+				hlist_del_rcu(&grp->hlist);
+
+				/* Free the group, after all cpu's are done. */
+				call_rcu(&grp->rcu, vlan_rcu_free);
+
+				grp = NULL;
+				ret = 1;
+			}
+		}
+	}
+
+        return ret;
+}
+
+static int unregister_vlan_device(const char *vlan_IF_name)
+{
+	struct net_device *dev = NULL;
+	int ret;
+
+
+	dev = dev_get_by_name(vlan_IF_name);
+	ret = -EINVAL;
+	if (dev) {
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			rtnl_lock();
+
+			ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
+						  VLAN_DEV_INFO(dev)->vlan_id);
+
+			dev_put(dev);
+			unregister_netdevice(dev);
+
+			rtnl_unlock();
+
+			if (ret == 1)
+				ret = 0;
+		} else {
+			printk(VLAN_ERR 
+			       "%s: ERROR:	Tried to remove a non-vlan device "
+			       "with VLAN code, name: %s  priv_flags: %hX\n",
+			       __FUNCTION__, dev->name, dev->priv_flags);
+			dev_put(dev);
+			ret = -EPERM;
+		}
+	} else {
+#ifdef VLAN_DEBUG
+		printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__);
+#endif
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static void vlan_setup(struct net_device *new_dev)
+{
+	SET_MODULE_OWNER(new_dev);
+	    
+	/* new_dev->ifindex = 0;  it will be set when added to
+	 * the global list.
+	 * iflink is set as well.
+	 */
+	new_dev->get_stats = vlan_dev_get_stats;
+
+	/* Make this thing known as a VLAN device */
+	new_dev->priv_flags |= IFF_802_1Q_VLAN;
+				
+	/* Set us up to have no queue, as the underlying Hardware device
+	 * can do all the queueing we could want.
+	 */
+	new_dev->tx_queue_len = 0;
+
+	/* set up method calls */
+	new_dev->change_mtu = vlan_dev_change_mtu;
+	new_dev->open = vlan_dev_open;
+	new_dev->stop = vlan_dev_stop;
+	new_dev->set_mac_address = vlan_dev_set_mac_address;
+	new_dev->set_multicast_list = vlan_dev_set_multicast_list;
+	new_dev->destructor = free_netdev;
+	new_dev->do_ioctl = vlan_dev_ioctl;
+}
+
+/*  Attach a VLAN device to a mac address (ie Ethernet Card).
+ *  Returns the device that was created, or NULL if there was
+ *  an error of some kind.
+ */
+static struct net_device *register_vlan_device(const char *eth_IF_name,
+					       unsigned short VLAN_ID)
+{
+	struct vlan_group *grp;
+	struct net_device *new_dev;
+	struct net_device *real_dev; /* the ethernet device */
+	char name[IFNAMSIZ];
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: if_name -:%s:-	vid: %i\n",
+		__FUNCTION__, eth_IF_name, VLAN_ID);
+#endif
+
+	if (VLAN_ID >= VLAN_VID_MASK)
+		goto out_ret_null;
+
+	/* find the device relating to eth_IF_name. */
+	real_dev = dev_get_by_name(eth_IF_name);
+	if (!real_dev)
+		goto out_ret_null;
+
+	if (real_dev->features & NETIF_F_VLAN_CHALLENGED) {
+		printk(VLAN_DBG "%s: VLANs not supported on %s.\n",
+			__FUNCTION__, real_dev->name);
+		goto out_put_dev;
+	}
+
+	if ((real_dev->features & NETIF_F_HW_VLAN_RX) &&
+	    (real_dev->vlan_rx_register == NULL ||
+	     real_dev->vlan_rx_kill_vid == NULL)) {
+		printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
+			__FUNCTION__, real_dev->name);
+		goto out_put_dev;
+	}
+
+	if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) &&
+	    (real_dev->vlan_rx_add_vid == NULL ||
+	     real_dev->vlan_rx_kill_vid == NULL)) {
+		printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
+			__FUNCTION__, real_dev->name);
+		goto out_put_dev;
+	}
+
+	/* From this point on, all the data structures must remain
+	 * consistent.
+	 */
+	rtnl_lock();
+
+	/* The real device must be up and operating in order to
+	 * assosciate a VLAN device with it.
+	 */
+	if (!(real_dev->flags & IFF_UP))
+		goto out_unlock;
+
+	if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) {
+		/* was already registered. */
+		printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__);
+		goto out_unlock;
+	}
+
+	/* Gotta set up the fields for the device. */
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n",
+	       vlan_name_type);
+#endif
+	switch (vlan_name_type) {
+	case VLAN_NAME_TYPE_RAW_PLUS_VID:
+		/* name will look like:	 eth1.0005 */
+		snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, VLAN_ID);
+		break;
+	case VLAN_NAME_TYPE_PLUS_VID_NO_PAD:
+		/* Put our vlan.VID in the name.
+		 * Name will look like:	 vlan5
+		 */
+		snprintf(name, IFNAMSIZ, "vlan%i", VLAN_ID);
+		break;
+	case VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD:
+		/* Put our vlan.VID in the name.
+		 * Name will look like:	 eth0.5
+		 */
+		snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, VLAN_ID);
+		break;
+	case VLAN_NAME_TYPE_PLUS_VID:
+		/* Put our vlan.VID in the name.
+		 * Name will look like:	 vlan0005
+		 */
+	default:
+		snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID);
+	};
+		    
+	new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name,
+			       vlan_setup);
+	if (new_dev == NULL)
+		goto out_unlock;
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name);
+#endif
+	/* IFF_BROADCAST|IFF_MULTICAST; ??? */
+	new_dev->flags = real_dev->flags;
+	new_dev->flags &= ~IFF_UP;
+
+	new_dev->state = real_dev->state & VLAN_LINK_STATE_MASK;
+
+	/* need 4 bytes for extra VLAN header info,
+	 * hope the underlying device can handle it.
+	 */
+	new_dev->mtu = real_dev->mtu;
+
+	/* TODO: maybe just assign it to be ETHERNET? */
+	new_dev->type = real_dev->type;
+
+	new_dev->hard_header_len = real_dev->hard_header_len;
+	if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) {
+		/* Regular ethernet + 4 bytes (18 total). */
+		new_dev->hard_header_len += VLAN_HLEN;
+	}
+
+	VLAN_MEM_DBG("new_dev->priv malloc, addr: %p  size: %i\n",
+		     new_dev->priv,
+		     sizeof(struct vlan_dev_info));
+	    
+	memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len);
+	memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len);
+	new_dev->addr_len = real_dev->addr_len;
+
+	if (real_dev->features & NETIF_F_HW_VLAN_TX) {
+		new_dev->hard_header = real_dev->hard_header;
+		new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit;
+		new_dev->rebuild_header = real_dev->rebuild_header;
+	} else {
+		new_dev->hard_header = vlan_dev_hard_header;
+		new_dev->hard_start_xmit = vlan_dev_hard_start_xmit;
+		new_dev->rebuild_header = vlan_dev_rebuild_header;
+	}
+	new_dev->hard_header_parse = real_dev->hard_header_parse;
+
+	VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */
+	VLAN_DEV_INFO(new_dev)->real_dev = real_dev;
+	VLAN_DEV_INFO(new_dev)->dent = NULL;
+	VLAN_DEV_INFO(new_dev)->flags = 1;
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "About to go find the group for idx: %i\n",
+	       real_dev->ifindex);
+#endif
+	    
+	if (register_netdevice(new_dev))
+		goto out_free_newdev;
+
+	/* So, got the sucker initialized, now lets place
+	 * it into our local structure.
+	 */
+	grp = __vlan_find_group(real_dev->ifindex);
+
+	/* Note, we are running under the RTNL semaphore
+	 * so it cannot "appear" on us.
+	 */
+	if (!grp) { /* need to add a new group */
+		grp = kmalloc(sizeof(struct vlan_group), GFP_KERNEL);
+		if (!grp)
+			goto out_free_unregister;
+					
+		/* printk(KERN_ALERT "VLAN REGISTER:  Allocated new group.\n"); */
+		memset(grp, 0, sizeof(struct vlan_group));
+		grp->real_dev_ifindex = real_dev->ifindex;
+
+		hlist_add_head_rcu(&grp->hlist, 
+				   &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]);
+
+		if (real_dev->features & NETIF_F_HW_VLAN_RX)
+			real_dev->vlan_rx_register(real_dev, grp);
+	}
+	    
+	grp->vlan_devices[VLAN_ID] = new_dev;
+
+	if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */
+            	printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
+					                 new_dev->name);
+
+	if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
+		real_dev->vlan_rx_add_vid(real_dev, VLAN_ID);
+
+	rtnl_unlock();
+
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "Allocated new device successfully, returning.\n");
+#endif
+	return new_dev;
+
+out_free_unregister:
+	unregister_netdev(new_dev);
+	goto out_unlock;
+
+out_free_newdev:
+	free_netdev(new_dev);
+
+out_unlock:
+	rtnl_unlock();
+
+out_put_dev:
+	dev_put(real_dev);
+
+out_ret_null:
+	return NULL;
+}
+
+static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
+{
+	struct net_device *dev = ptr;
+	struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+	int i, flgs;
+	struct net_device *vlandev;
+
+	if (!grp)
+		goto out;
+
+	/* It is OK that we do not hold the group lock right now,
+	 * as we run under the RTNL lock.
+	 */
+
+	switch (event) {
+	case NETDEV_CHANGE:
+		/* Propagate real device state to vlan devices */
+		flgs = dev->state & VLAN_LINK_STATE_MASK;
+		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+			vlandev = grp->vlan_devices[i];
+			if (!vlandev)
+				continue;
+
+			if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) {
+				vlandev->state = (vlandev->state &~ VLAN_LINK_STATE_MASK) 
+					| flgs;
+				netdev_state_change(vlandev);
+			}
+		}
+		break;
+
+	case NETDEV_DOWN:
+		/* Put all VLANs for this dev in the down state too.  */
+		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+			vlandev = grp->vlan_devices[i];
+			if (!vlandev)
+				continue;
+
+			flgs = vlandev->flags;
+			if (!(flgs & IFF_UP))
+				continue;
+
+			dev_change_flags(vlandev, flgs & ~IFF_UP);
+		}
+		break;
+
+	case NETDEV_UP:
+		/* Put all VLANs for this dev in the up state too.  */
+		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+			vlandev = grp->vlan_devices[i];
+			if (!vlandev)
+				continue;
+				
+			flgs = vlandev->flags;
+			if (flgs & IFF_UP)
+				continue;
+
+			dev_change_flags(vlandev, flgs | IFF_UP);
+		}
+		break;
+		
+	case NETDEV_UNREGISTER:
+		/* Delete all VLANs for this dev. */
+		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+			int ret;
+
+			vlandev = grp->vlan_devices[i];
+			if (!vlandev)
+				continue;
+
+			ret = unregister_vlan_dev(dev,
+						  VLAN_DEV_INFO(vlandev)->vlan_id);
+
+			unregister_netdevice(vlandev);
+
+			/* Group was destroyed? */
+			if (ret == 1)
+				break;
+		}
+		break;
+	};
+
+out:
+	return NOTIFY_DONE;
+}
+
+/*
+ *	VLAN IOCTL handler.
+ *	o execute requested action or pass command to the device driver
+ *   arg is really a struct vlan_ioctl_args __user *.
+ */
+static int vlan_ioctl_handler(void __user *arg)
+{
+	int err = 0;
+	unsigned short vid = 0;
+	struct vlan_ioctl_args args;
+
+	if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args)))
+		return -EFAULT;
+
+	/* Null terminate this sucker, just in case. */
+	args.device1[23] = 0;
+	args.u.device2[23] = 0;
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd);
+#endif
+
+	switch (args.cmd) {
+	case SET_VLAN_INGRESS_PRIORITY_CMD:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		err = vlan_dev_set_ingress_priority(args.device1,
+						    args.u.skb_priority,
+						    args.vlan_qos);
+		break;
+
+	case SET_VLAN_EGRESS_PRIORITY_CMD:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		err = vlan_dev_set_egress_priority(args.device1,
+						   args.u.skb_priority,
+						   args.vlan_qos);
+		break;
+
+	case SET_VLAN_FLAG_CMD:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		err = vlan_dev_set_vlan_flag(args.device1,
+					     args.u.flag,
+					     args.vlan_qos);
+		break;
+
+	case SET_VLAN_NAME_TYPE_CMD:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if ((args.u.name_type >= 0) &&
+		    (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) {
+			vlan_name_type = args.u.name_type;
+			err = 0;
+		} else {
+			err = -EINVAL;
+		}
+		break;
+
+	case ADD_VLAN_CMD:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		/* we have been given the name of the Ethernet Device we want to
+		 * talk to:  args.dev1	 We also have the
+		 * VLAN ID:  args.u.VID
+		 */
+		if (register_vlan_device(args.device1, args.u.VID)) {
+			err = 0;
+		} else {
+			err = -EINVAL;
+		}
+		break;
+
+	case DEL_VLAN_CMD:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		/* Here, the args.dev1 is the actual VLAN we want
+		 * to get rid of.
+		 */
+		err = unregister_vlan_device(args.device1);
+		break;
+
+	case GET_VLAN_INGRESS_PRIORITY_CMD:
+		/* TODO:  Implement
+		   err = vlan_dev_get_ingress_priority(args);
+		   if (copy_to_user((void*)arg, &args,
+		        sizeof(struct vlan_ioctl_args))) {
+		        err = -EFAULT;
+		   }
+		*/
+		err = -EINVAL;
+		break;
+	case GET_VLAN_EGRESS_PRIORITY_CMD:
+		/* TODO:  Implement
+		   err = vlan_dev_get_egress_priority(args.device1, &(args.args);
+		   if (copy_to_user((void*)arg, &args,
+		        sizeof(struct vlan_ioctl_args))) {
+		        err = -EFAULT;
+		   }
+		*/
+		err = -EINVAL;
+		break;
+	case GET_VLAN_REALDEV_NAME_CMD:
+		err = vlan_dev_get_realdev_name(args.device1, args.u.device2);
+		if (copy_to_user(arg, &args,
+				 sizeof(struct vlan_ioctl_args))) {
+			err = -EFAULT;
+		}
+		break;
+
+	case GET_VLAN_VID_CMD:
+		err = vlan_dev_get_vid(args.device1, &vid);
+		args.u.VID = vid;
+		if (copy_to_user(arg, &args,
+				 sizeof(struct vlan_ioctl_args))) {
+                      err = -EFAULT;
+		}
+		break;
+
+	default:
+		/* pass on to underlying device instead?? */
+		printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n",
+			__FUNCTION__, args.cmd);
+		return -EINVAL;
+	};
+
+	return err;
+}
+
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
new file mode 100644
index 0000000..508b1fa
--- /dev/null
+++ b/net/8021q/vlan.h
@@ -0,0 +1,72 @@
+#ifndef __BEN_VLAN_802_1Q_INC__
+#define __BEN_VLAN_802_1Q_INC__
+
+#include <linux/if_vlan.h>
+
+/*  Uncomment this if you want debug traces to be shown. */
+/* #define VLAN_DEBUG */
+
+#define VLAN_ERR KERN_ERR
+#define VLAN_INF KERN_INFO
+#define VLAN_DBG KERN_ALERT /* change these... to debug, having a hard time
+                             * changing the log level at run-time..for some reason.
+                             */
+
+/*
+
+These I use for memory debugging.  I feared a leak at one time, but
+I never found it..and the problem seems to have dissappeared.  Still,
+I'll bet they might prove useful again... --Ben
+
+
+#define VLAN_MEM_DBG(x, y, z) printk(VLAN_DBG "%s:  "  x, __FUNCTION__, y, z);
+#define VLAN_FMEM_DBG(x, y) printk(VLAN_DBG "%s:  " x, __FUNCTION__, y);
+*/
+
+/* This way they don't do anything! */
+#define VLAN_MEM_DBG(x, y, z) 
+#define VLAN_FMEM_DBG(x, y)
+
+
+extern unsigned short vlan_name_type;
+
+#define VLAN_GRP_HASH_SHIFT	5
+#define VLAN_GRP_HASH_SIZE	(1 << VLAN_GRP_HASH_SHIFT)
+#define VLAN_GRP_HASH_MASK	(VLAN_GRP_HASH_SIZE - 1)
+
+/*  Find a VLAN device by the MAC address of its Ethernet device, and
+ *  it's VLAN ID.  The default configuration is to have VLAN's scope
+ *  to be box-wide, so the MAC will be ignored.  The mac will only be
+ *  looked at if we are configured to have a separate set of VLANs per
+ *  each MAC addressable interface.  Note that this latter option does
+ *  NOT follow the spec for VLANs, but may be useful for doing very
+ *  large quantities of VLAN MUX/DEMUX onto FrameRelay or ATM PVCs.
+ *
+ *  Must be invoked with rcu_read_lock (ie preempt disabled)
+ *  or with RTNL.
+ */
+struct net_device *__find_vlan_dev(struct net_device* real_dev,
+				   unsigned short VID); /* vlan.c */
+
+/* found in vlan_dev.c */
+int vlan_dev_rebuild_header(struct sk_buff *skb);
+int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
+                  struct packet_type* ptype);
+int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+                         unsigned short type, void *daddr, void *saddr,
+                         unsigned len);
+int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
+int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
+int vlan_dev_change_mtu(struct net_device *dev, int new_mtu);
+int vlan_dev_set_mac_address(struct net_device *dev, void* addr);
+int vlan_dev_open(struct net_device* dev);
+int vlan_dev_stop(struct net_device* dev);
+int vlan_dev_ioctl(struct net_device* dev, struct ifreq *ifr, int cmd);
+int vlan_dev_set_ingress_priority(char* dev_name, __u32 skb_prio, short vlan_prio);
+int vlan_dev_set_egress_priority(char* dev_name, __u32 skb_prio, short vlan_prio);
+int vlan_dev_set_vlan_flag(char* dev_name, __u32 flag, short flag_val);
+int vlan_dev_get_realdev_name(const char* dev_name, char* result);
+int vlan_dev_get_vid(const char* dev_name, unsigned short* result);
+void vlan_dev_set_multicast_list(struct net_device *vlan_dev);
+
+#endif /* !(__BEN_VLAN_802_1Q_INC__) */
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
new file mode 100644
index 0000000..49c4874
--- /dev/null
+++ b/net/8021q/vlan_dev.c
@@ -0,0 +1,890 @@
+/* -*- linux-c -*-
+ * INET		802.1Q VLAN
+ *		Ethernet-type device handling.
+ *
+ * Authors:	Ben Greear <greearb@candelatech.com>
+ *              Please send support related email to: vlan@scry.wanfear.com
+ *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
+ * 
+ * Fixes:       Mar 22 2001: Martin Bokaemper <mbokaemper@unispherenetworks.com>
+ *                - reset skb->pkt_type on incoming packets when MAC was changed
+ *                - see that changed MAC is saddr for outgoing packets
+ *              Oct 20, 2001:  Ard van Breeman:
+ *                - Fix MC-list, finally.
+ *                - Flush MC-list on VLAN destroy.
+ *                
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/in.h>
+#include <linux/init.h>
+#include <asm/uaccess.h> /* for copy_from_user */
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/datalink.h>
+#include <net/p8022.h>
+#include <net/arp.h>
+
+#include "vlan.h"
+#include "vlanproc.h"
+#include <linux/if_vlan.h>
+#include <net/ip.h>
+
+/*
+ *	Rebuild the Ethernet MAC header. This is called after an ARP
+ *	(or in future other address resolution) has completed on this
+ *	sk_buff. We now let ARP fill in the other fields.
+ *
+ *	This routine CANNOT use cached dst->neigh!
+ *	Really, it is used only when dst->neigh is wrong.
+ *
+ * TODO:  This needs a checkup, I'm ignorant here. --BLG
+ */
+int vlan_dev_rebuild_header(struct sk_buff *skb)
+{
+	struct net_device *dev = skb->dev;
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
+
+	switch (veth->h_vlan_encapsulated_proto) {
+#ifdef CONFIG_INET
+	case __constant_htons(ETH_P_IP):
+
+		/* TODO:  Confirm this will work with VLAN headers... */
+		return arp_find(veth->h_dest, skb);
+#endif	
+	default:
+		printk(VLAN_DBG
+		       "%s: unable to resolve type %X addresses.\n", 
+		       dev->name, (int)veth->h_vlan_encapsulated_proto);
+	 
+		memcpy(veth->h_source, dev->dev_addr, ETH_ALEN);
+		break;
+	};
+
+	return 0;
+}
+
+static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
+{
+	if (VLAN_DEV_INFO(skb->dev)->flags & 1) {
+		if (skb_shared(skb) || skb_cloned(skb)) {
+			struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
+			kfree_skb(skb);
+			skb = nskb;
+		}
+		if (skb) {
+			/* Lifted from Gleb's VLAN code... */
+			memmove(skb->data - ETH_HLEN,
+				skb->data - VLAN_ETH_HLEN, 12);
+			skb->mac.raw += VLAN_HLEN;
+		}
+	}
+
+	return skb;
+}
+
+/*
+ *	Determine the packet's protocol ID. The rule here is that we 
+ *	assume 802.3 if the type field is short enough to be a length.
+ *	This is normal practice and works for any 'now in use' protocol.
+ *
+ *  Also, at this point we assume that we ARE dealing exclusively with
+ *  VLAN packets, or packets that should be made into VLAN packets based
+ *  on a default VLAN ID.
+ *
+ *  NOTE:  Should be similar to ethernet/eth.c.
+ *
+ *  SANITY NOTE:  This method is called when a packet is moving up the stack
+ *                towards userland.  To get here, it would have already passed
+ *                through the ethernet/eth.c eth_type_trans() method.
+ *  SANITY NOTE 2: We are referencing to the VLAN_HDR frields, which MAY be
+ *                 stored UNALIGNED in the memory.  RISC systems don't like
+ *                 such cases very much...
+ *  SANITY NOTE 2a:  According to Dave Miller & Alexey, it will always be aligned,
+ *                 so there doesn't need to be any of the unaligned stuff.  It has
+ *                 been commented out now...  --Ben
+ *
+ */
+int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
+                  struct packet_type* ptype)
+{
+	unsigned char *rawp = NULL;
+	struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data);
+	unsigned short vid;
+	struct net_device_stats *stats;
+	unsigned short vlan_TCI;
+	unsigned short proto;
+
+	/* vlan_TCI = ntohs(get_unaligned(&vhdr->h_vlan_TCI)); */
+	vlan_TCI = ntohs(vhdr->h_vlan_TCI);
+
+	vid = (vlan_TCI & VLAN_VID_MASK);
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: skb: %p vlan_id: %hx\n",
+		__FUNCTION__, skb, vid);
+#endif
+
+	/* Ok, we will find the correct VLAN device, strip the header,
+	 * and then go on as usual.
+	 */
+
+	/* We have 12 bits of vlan ID.
+	 *
+	 * We must not drop allow preempt until we hold a
+	 * reference to the device (netif_rx does that) or we
+	 * fail.
+	 */
+
+	rcu_read_lock();
+	skb->dev = __find_vlan_dev(dev, vid);
+	if (!skb->dev) {
+		rcu_read_unlock();
+
+#ifdef VLAN_DEBUG
+		printk(VLAN_DBG "%s: ERROR: No net_device for VID: %i on dev: %s [%i]\n",
+			__FUNCTION__, (unsigned int)(vid), dev->name, dev->ifindex);
+#endif
+		kfree_skb(skb);
+		return -1;
+	}
+
+	skb->dev->last_rx = jiffies;
+
+	/* Bump the rx counters for the VLAN device. */
+	stats = vlan_dev_get_stats(skb->dev);
+	stats->rx_packets++;
+	stats->rx_bytes += skb->len;
+
+	skb_pull(skb, VLAN_HLEN); /* take off the VLAN header (4 bytes currently) */
+
+	/* Ok, lets check to make sure the device (dev) we
+	 * came in on is what this VLAN is attached to.
+	 */
+
+	if (dev != VLAN_DEV_INFO(skb->dev)->real_dev) {
+		rcu_read_unlock();
+
+#ifdef VLAN_DEBUG
+		printk(VLAN_DBG "%s: dropping skb: %p because came in on wrong device, dev: %s  real_dev: %s, skb_dev: %s\n",
+			__FUNCTION__, skb, dev->name, 
+			VLAN_DEV_INFO(skb->dev)->real_dev->name, 
+			skb->dev->name);
+#endif
+		kfree_skb(skb);
+		stats->rx_errors++;
+		return -1;
+	}
+
+	/*
+	 * Deal with ingress priority mapping.
+	 */
+	skb->priority = vlan_get_ingress_priority(skb->dev, ntohs(vhdr->h_vlan_TCI));
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: priority: %lu  for TCI: %hu (hbo)\n",
+		__FUNCTION__, (unsigned long)(skb->priority), 
+		ntohs(vhdr->h_vlan_TCI));
+#endif
+
+	/* The ethernet driver already did the pkt_type calculations
+	 * for us...
+	 */
+	switch (skb->pkt_type) {
+	case PACKET_BROADCAST: /* Yeah, stats collect these together.. */
+		// stats->broadcast ++; // no such counter :-(
+		break;
+
+	case PACKET_MULTICAST:
+		stats->multicast++;
+		break;
+
+	case PACKET_OTHERHOST: 
+		/* Our lower layer thinks this is not local, let's make sure.
+		 * This allows the VLAN to have a different MAC than the underlying
+		 * device, and still route correctly.
+		 */
+		if (memcmp(eth_hdr(skb)->h_dest, skb->dev->dev_addr, ETH_ALEN) == 0) {
+			/* It is for our (changed) MAC-address! */
+			skb->pkt_type = PACKET_HOST;
+		}
+		break;
+	default:
+		break;
+	};
+
+	/*  Was a VLAN packet, grab the encapsulated protocol, which the layer
+	 * three protocols care about.
+	 */
+	/* proto = get_unaligned(&vhdr->h_vlan_encapsulated_proto); */
+	proto = vhdr->h_vlan_encapsulated_proto;
+
+	skb->protocol = proto;
+	if (ntohs(proto) >= 1536) {
+		/* place it back on the queue to be handled by
+		 * true layer 3 protocols.
+		 */
+
+		/* See if we are configured to re-write the VLAN header
+		 * to make it look like ethernet...
+		 */
+		skb = vlan_check_reorder_header(skb);
+
+		/* Can be null if skb-clone fails when re-ordering */
+		if (skb) {
+			netif_rx(skb);
+		} else {
+			/* TODO:  Add a more specific counter here. */
+			stats->rx_errors++;
+		}
+		rcu_read_unlock();
+		return 0;
+	}
+
+	rawp = skb->data;
+
+	/*
+	 * This is a magic hack to spot IPX packets. Older Novell breaks
+	 * the protocol design and runs IPX over 802.3 without an 802.2 LLC
+	 * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
+	 * won't work for fault tolerant netware but does for the rest.
+	 */
+	if (*(unsigned short *)rawp == 0xFFFF) {
+		skb->protocol = __constant_htons(ETH_P_802_3);
+		/* place it back on the queue to be handled by true layer 3 protocols.
+		 */
+
+		/* See if we are configured to re-write the VLAN header
+		 * to make it look like ethernet...
+		 */
+		skb = vlan_check_reorder_header(skb);
+
+		/* Can be null if skb-clone fails when re-ordering */
+		if (skb) {
+			netif_rx(skb);
+		} else {
+			/* TODO:  Add a more specific counter here. */
+			stats->rx_errors++;
+		}
+		rcu_read_unlock();
+		return 0;
+	}
+
+	/*
+	 *	Real 802.2 LLC
+	 */
+	skb->protocol = __constant_htons(ETH_P_802_2);
+	/* place it back on the queue to be handled by upper layer protocols.
+	 */
+
+	/* See if we are configured to re-write the VLAN header
+	 * to make it look like ethernet...
+	 */
+	skb = vlan_check_reorder_header(skb);
+
+	/* Can be null if skb-clone fails when re-ordering */
+	if (skb) {
+		netif_rx(skb);
+	} else {
+		/* TODO:  Add a more specific counter here. */
+		stats->rx_errors++;
+	}
+	rcu_read_unlock();
+	return 0;
+}
+
+static inline unsigned short vlan_dev_get_egress_qos_mask(struct net_device* dev,
+							  struct sk_buff* skb)
+{
+	struct vlan_priority_tci_mapping *mp =
+		VLAN_DEV_INFO(dev)->egress_priority_map[(skb->priority & 0xF)];
+
+	while (mp) {
+		if (mp->priority == skb->priority) {
+			return mp->vlan_qos; /* This should already be shifted to mask
+					      * correctly with the VLAN's TCI
+					      */
+		}
+		mp = mp->next;
+	}
+	return 0;
+}
+
+/*
+ *	Create the VLAN header for an arbitrary protocol layer 
+ *
+ *	saddr=NULL	means use device source address
+ *	daddr=NULL	means leave destination address (eg unresolved arp)
+ *
+ *  This is called when the SKB is moving down the stack towards the
+ *  physical devices.
+ */
+int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
+                         unsigned short type, void *daddr, void *saddr,
+                         unsigned len)
+{
+	struct vlan_hdr *vhdr;
+	unsigned short veth_TCI = 0;
+	int rc = 0;
+	int build_vlan_header = 0;
+	struct net_device *vdev = dev; /* save this for the bottom of the method */
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: skb: %p type: %hx len: %x vlan_id: %hx, daddr: %p\n",
+		__FUNCTION__, skb, type, len, VLAN_DEV_INFO(dev)->vlan_id, daddr);
+#endif
+
+	/* build vlan header only if re_order_header flag is NOT set.  This
+	 * fixes some programs that get confused when they see a VLAN device
+	 * sending a frame that is VLAN encoded (the consensus is that the VLAN
+	 * device should look completely like an Ethernet device when the
+	 * REORDER_HEADER flag is set)	The drawback to this is some extra 
+	 * header shuffling in the hard_start_xmit.  Users can turn off this
+	 * REORDER behaviour with the vconfig tool.
+	 */
+	build_vlan_header = ((VLAN_DEV_INFO(dev)->flags & 1) == 0);
+
+	if (build_vlan_header) {
+		vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN);
+
+		/* build the four bytes that make this a VLAN header. */
+
+		/* Now, construct the second two bytes. This field looks something
+		 * like:
+		 * usr_priority: 3 bits	 (high bits)
+		 * CFI		 1 bit
+		 * VLAN ID	 12 bits (low bits)
+		 *
+		 */
+		veth_TCI = VLAN_DEV_INFO(dev)->vlan_id;
+		veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb);
+
+		vhdr->h_vlan_TCI = htons(veth_TCI);
+
+		/*
+		 *  Set the protocol type.
+		 *  For a packet of type ETH_P_802_3 we put the length in here instead.
+		 *  It is up to the 802.2 layer to carry protocol information.
+		 */
+
+		if (type != ETH_P_802_3) {
+			vhdr->h_vlan_encapsulated_proto = htons(type);
+		} else {
+			vhdr->h_vlan_encapsulated_proto = htons(len);
+		}
+	}
+
+	/* Before delegating work to the lower layer, enter our MAC-address */
+	if (saddr == NULL)
+		saddr = dev->dev_addr;
+
+	dev = VLAN_DEV_INFO(dev)->real_dev;
+
+	/* MPLS can send us skbuffs w/out enough space.	 This check will grow the
+	 * skb if it doesn't have enough headroom.  Not a beautiful solution, so
+	 * I'll tick a counter so that users can know it's happening...	 If they
+	 * care...
+	 */
+
+	/* NOTE:  This may still break if the underlying device is not the final
+	 * device (and thus there are more headers to add...)  It should work for
+	 * good-ole-ethernet though.
+	 */
+	if (skb_headroom(skb) < dev->hard_header_len) {
+		struct sk_buff *sk_tmp = skb;
+		skb = skb_realloc_headroom(sk_tmp, dev->hard_header_len);
+		kfree_skb(sk_tmp);
+		if (skb == NULL) {
+			struct net_device_stats *stats = vlan_dev_get_stats(vdev);
+			stats->tx_dropped++;
+			return -ENOMEM;
+		}
+		VLAN_DEV_INFO(vdev)->cnt_inc_headroom_on_tx++;
+#ifdef VLAN_DEBUG
+		printk(VLAN_DBG "%s: %s: had to grow skb.\n", __FUNCTION__, vdev->name);
+#endif
+	}
+
+	if (build_vlan_header) {
+		/* Now make the underlying real hard header */
+		rc = dev->hard_header(skb, dev, ETH_P_8021Q, daddr, saddr, len + VLAN_HLEN);
+
+		if (rc > 0) {
+			rc += VLAN_HLEN;
+		} else if (rc < 0) {
+			rc -= VLAN_HLEN;
+		}
+	} else {
+		/* If here, then we'll just make a normal looking ethernet frame,
+		 * but, the hard_start_xmit method will insert the tag (it has to
+		 * be able to do this for bridged and other skbs that don't come
+		 * down the protocol stack in an orderly manner.
+		 */
+		rc = dev->hard_header(skb, dev, type, daddr, saddr, len);
+	}
+
+	return rc;
+}
+
+int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct net_device_stats *stats = vlan_dev_get_stats(dev);
+	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
+
+	/* Handle non-VLAN frames if they are sent to us, for example by DHCP.
+	 *
+	 * NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING
+	 * OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs...
+	 */
+
+	if (veth->h_vlan_proto != __constant_htons(ETH_P_8021Q)) {
+		int orig_headroom = skb_headroom(skb);
+		unsigned short veth_TCI;
+
+		/* This is not a VLAN frame...but we can fix that! */
+		VLAN_DEV_INFO(dev)->cnt_encap_on_xmit++;
+
+#ifdef VLAN_DEBUG
+		printk(VLAN_DBG "%s: proto to encap: 0x%hx (hbo)\n",
+			__FUNCTION__, htons(veth->h_vlan_proto));
+#endif
+		/* Construct the second two bytes. This field looks something
+		 * like:
+		 * usr_priority: 3 bits	 (high bits)
+		 * CFI		 1 bit
+		 * VLAN ID	 12 bits (low bits)
+		 */
+		veth_TCI = VLAN_DEV_INFO(dev)->vlan_id;
+		veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb);
+
+		skb = __vlan_put_tag(skb, veth_TCI);
+		if (!skb) {
+			stats->tx_dropped++;
+			return 0;
+		}
+
+		if (orig_headroom < VLAN_HLEN) {
+			VLAN_DEV_INFO(dev)->cnt_inc_headroom_on_tx++;
+		}
+	}
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: about to send skb: %p to dev: %s\n",
+		__FUNCTION__, skb, skb->dev->name);
+	printk(VLAN_DBG "  %2hx.%2hx.%2hx.%2xh.%2hx.%2hx %2hx.%2hx.%2hx.%2hx.%2hx.%2hx %4hx %4hx %4hx\n",
+	       veth->h_dest[0], veth->h_dest[1], veth->h_dest[2], veth->h_dest[3], veth->h_dest[4], veth->h_dest[5],
+	       veth->h_source[0], veth->h_source[1], veth->h_source[2], veth->h_source[3], veth->h_source[4], veth->h_source[5],
+	       veth->h_vlan_proto, veth->h_vlan_TCI, veth->h_vlan_encapsulated_proto);
+#endif
+
+	stats->tx_packets++; /* for statics only */
+	stats->tx_bytes += skb->len;
+
+	skb->dev = VLAN_DEV_INFO(dev)->real_dev;
+	dev_queue_xmit(skb);
+
+	return 0;
+}
+
+int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct net_device_stats *stats = vlan_dev_get_stats(dev);
+	unsigned short veth_TCI;
+
+	/* Construct the second two bytes. This field looks something
+	 * like:
+	 * usr_priority: 3 bits	 (high bits)
+	 * CFI		 1 bit
+	 * VLAN ID	 12 bits (low bits)
+	 */
+	veth_TCI = VLAN_DEV_INFO(dev)->vlan_id;
+	veth_TCI |= vlan_dev_get_egress_qos_mask(dev, skb);
+	skb = __vlan_hwaccel_put_tag(skb, veth_TCI);
+
+	stats->tx_packets++;
+	stats->tx_bytes += skb->len;
+
+	skb->dev = VLAN_DEV_INFO(dev)->real_dev;
+	dev_queue_xmit(skb);
+
+	return 0;
+}
+
+int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
+{
+	/* TODO: gotta make sure the underlying layer can handle it,
+	 * maybe an IFF_VLAN_CAPABLE flag for devices?
+	 */
+	if (VLAN_DEV_INFO(dev)->real_dev->mtu < new_mtu)
+		return -ERANGE;
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+int vlan_dev_set_ingress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+{
+	struct net_device *dev = dev_get_by_name(dev_name);
+
+	if (dev) {
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			/* see if a priority mapping exists.. */
+			VLAN_DEV_INFO(dev)->ingress_priority_map[vlan_prio & 0x7] = skb_prio;
+			dev_put(dev);
+			return 0;
+		}
+
+		dev_put(dev);
+	}
+	return -EINVAL;
+}
+
+int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+{
+	struct net_device *dev = dev_get_by_name(dev_name);
+	struct vlan_priority_tci_mapping *mp = NULL;
+	struct vlan_priority_tci_mapping *np;
+   
+	if (dev) {
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			/* See if a priority mapping exists.. */
+			mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
+			while (mp) {
+				if (mp->priority == skb_prio) {
+					mp->vlan_qos = ((vlan_prio << 13) & 0xE000);
+					dev_put(dev);
+					return 0;
+				}
+				mp = mp->next;
+			}
+
+			/* Create a new mapping then. */
+			mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
+			np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL);
+			if (np) {
+				np->next = mp;
+				np->priority = skb_prio;
+				np->vlan_qos = ((vlan_prio << 13) & 0xE000);
+				VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF] = np;
+				dev_put(dev);
+				return 0;
+			} else {
+				dev_put(dev);
+				return -ENOBUFS;
+			}
+		}
+		dev_put(dev);
+	}
+	return -EINVAL;
+}
+
+/* Flags are defined in the vlan_dev_info class in include/linux/if_vlan.h file. */
+int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val)
+{
+	struct net_device *dev = dev_get_by_name(dev_name);
+
+	if (dev) {
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			/* verify flag is supported */
+			if (flag == 1) {
+				if (flag_val) {
+					VLAN_DEV_INFO(dev)->flags |= 1;
+				} else {
+					VLAN_DEV_INFO(dev)->flags &= ~1;
+				}
+				dev_put(dev);
+				return 0;
+			} else {
+				printk(KERN_ERR  "%s: flag %i is not valid.\n",
+					__FUNCTION__, (int)(flag));
+				dev_put(dev);
+				return -EINVAL;
+			}
+		} else {
+			printk(KERN_ERR 
+			       "%s: %s is not a vlan device, priv_flags: %hX.\n",
+			       __FUNCTION__, dev->name, dev->priv_flags);
+			dev_put(dev);
+		}
+	} else {
+		printk(KERN_ERR  "%s: Could not find device: %s\n", 
+			__FUNCTION__, dev_name);
+	}
+
+	return -EINVAL;
+}
+
+
+int vlan_dev_get_realdev_name(const char *dev_name, char* result)
+{
+	struct net_device *dev = dev_get_by_name(dev_name);
+	int rv = 0;
+	if (dev) {
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23);
+			rv = 0;
+		} else {
+			rv = -EINVAL;
+		}
+		dev_put(dev);
+	} else {
+		rv = -ENODEV;
+	}
+	return rv;
+}
+
+int vlan_dev_get_vid(const char *dev_name, unsigned short* result)
+{
+	struct net_device *dev = dev_get_by_name(dev_name);
+	int rv = 0;
+	if (dev) {
+		if (dev->priv_flags & IFF_802_1Q_VLAN) {
+			*result = VLAN_DEV_INFO(dev)->vlan_id;
+			rv = 0;
+		} else {
+			rv = -EINVAL;
+		}
+		dev_put(dev);
+	} else {
+		rv = -ENODEV;
+	}
+	return rv;
+}
+
+
+int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p)
+{
+	struct sockaddr *addr = (struct sockaddr *)(addr_struct_p);
+	int i;
+
+	if (netif_running(dev))
+		return -EBUSY;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	printk("%s: Setting MAC address to ", dev->name);
+	for (i = 0; i < 6; i++)
+		printk(" %2.2x", dev->dev_addr[i]);
+	printk(".\n");
+
+	if (memcmp(VLAN_DEV_INFO(dev)->real_dev->dev_addr,
+		   dev->dev_addr,
+		   dev->addr_len) != 0) {
+		if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_PROMISC)) {
+			int flgs = VLAN_DEV_INFO(dev)->real_dev->flags;
+
+			/* Increment our in-use promiscuity counter */
+			dev_set_promiscuity(VLAN_DEV_INFO(dev)->real_dev, 1);
+
+			/* Make PROMISC visible to the user. */
+			flgs |= IFF_PROMISC;
+			printk("VLAN (%s):  Setting underlying device (%s) to promiscious mode.\n",
+			       dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
+			dev_change_flags(VLAN_DEV_INFO(dev)->real_dev, flgs);
+		}
+	} else {
+		printk("VLAN (%s):  Underlying device (%s) has same MAC, not checking promiscious mode.\n",
+		       dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
+	}
+
+	return 0;
+}
+
+static inline int vlan_dmi_equals(struct dev_mc_list *dmi1,
+                                  struct dev_mc_list *dmi2)
+{
+	return ((dmi1->dmi_addrlen == dmi2->dmi_addrlen) &&
+		(memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0));
+}
+
+/** dmi is a single entry into a dev_mc_list, a single node.  mc_list is
+ *  an entire list, and we'll iterate through it.
+ */
+static int vlan_should_add_mc(struct dev_mc_list *dmi, struct dev_mc_list *mc_list)
+{
+	struct dev_mc_list *idmi;
+
+	for (idmi = mc_list; idmi != NULL; ) {
+		if (vlan_dmi_equals(dmi, idmi)) {
+			if (dmi->dmi_users > idmi->dmi_users)
+				return 1;
+			else
+				return 0;
+		} else {
+			idmi = idmi->next;
+		}
+	}
+
+	return 1;
+}
+
+static inline void vlan_destroy_mc_list(struct dev_mc_list *mc_list)
+{
+	struct dev_mc_list *dmi = mc_list;
+	struct dev_mc_list *next;
+
+	while(dmi) {
+		next = dmi->next;
+		kfree(dmi);
+		dmi = next;
+	}
+}
+
+static void vlan_copy_mc_list(struct dev_mc_list *mc_list, struct vlan_dev_info *vlan_info)
+{
+	struct dev_mc_list *dmi, *new_dmi;
+
+	vlan_destroy_mc_list(vlan_info->old_mc_list);
+	vlan_info->old_mc_list = NULL;
+
+	for (dmi = mc_list; dmi != NULL; dmi = dmi->next) {
+		new_dmi = kmalloc(sizeof(*new_dmi), GFP_ATOMIC);
+		if (new_dmi == NULL) {
+			printk(KERN_ERR "vlan: cannot allocate memory. "
+			       "Multicast may not work properly from now.\n");
+			return;
+		}
+
+		/* Copy whole structure, then make new 'next' pointer */
+		*new_dmi = *dmi;
+		new_dmi->next = vlan_info->old_mc_list;
+		vlan_info->old_mc_list = new_dmi;
+	}
+}
+
+static void vlan_flush_mc_list(struct net_device *dev)
+{
+	struct dev_mc_list *dmi = dev->mc_list;
+
+	while (dmi) {
+		printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from vlan interface\n",
+		       dev->name,
+		       dmi->dmi_addr[0],
+		       dmi->dmi_addr[1],
+		       dmi->dmi_addr[2],
+		       dmi->dmi_addr[3],
+		       dmi->dmi_addr[4],
+		       dmi->dmi_addr[5]);
+		dev_mc_delete(dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
+		dmi = dev->mc_list;
+	}
+
+	/* dev->mc_list is NULL by the time we get here. */
+	vlan_destroy_mc_list(VLAN_DEV_INFO(dev)->old_mc_list);
+	VLAN_DEV_INFO(dev)->old_mc_list = NULL;
+}
+
+int vlan_dev_open(struct net_device *dev)
+{
+	if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_UP))
+		return -ENETDOWN;
+
+	return 0;
+}
+
+int vlan_dev_stop(struct net_device *dev)
+{
+	vlan_flush_mc_list(dev);
+	return 0;
+}
+
+int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
+	struct ifreq ifrr;
+	int err = -EOPNOTSUPP;
+
+	strncpy(ifrr.ifr_name, real_dev->name, IFNAMSIZ);
+	ifrr.ifr_ifru = ifr->ifr_ifru;
+
+	switch(cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		if (real_dev->do_ioctl && netif_device_present(real_dev)) 
+			err = real_dev->do_ioctl(real_dev, &ifrr, cmd);
+		break;
+
+	case SIOCETHTOOL:
+		err = dev_ethtool(&ifrr);
+	}
+
+	if (!err) 
+		ifr->ifr_ifru = ifrr.ifr_ifru;
+
+	return err;
+}
+
+/** Taken from Gleb + Lennert's VLAN code, and modified... */
+void vlan_dev_set_multicast_list(struct net_device *vlan_dev)
+{
+	struct dev_mc_list *dmi;
+	struct net_device *real_dev;
+	int inc;
+
+	if (vlan_dev && (vlan_dev->priv_flags & IFF_802_1Q_VLAN)) {
+		/* Then it's a real vlan device, as far as we can tell.. */
+		real_dev = VLAN_DEV_INFO(vlan_dev)->real_dev;
+
+		/* compare the current promiscuity to the last promisc we had.. */
+		inc = vlan_dev->promiscuity - VLAN_DEV_INFO(vlan_dev)->old_promiscuity;
+		if (inc) {
+			printk(KERN_INFO "%s: dev_set_promiscuity(master, %d)\n",
+			       vlan_dev->name, inc);
+			dev_set_promiscuity(real_dev, inc); /* found in dev.c */
+			VLAN_DEV_INFO(vlan_dev)->old_promiscuity = vlan_dev->promiscuity;
+		}
+
+		inc = vlan_dev->allmulti - VLAN_DEV_INFO(vlan_dev)->old_allmulti;
+		if (inc) {
+			printk(KERN_INFO "%s: dev_set_allmulti(master, %d)\n",
+			       vlan_dev->name, inc);
+			dev_set_allmulti(real_dev, inc); /* dev.c */
+			VLAN_DEV_INFO(vlan_dev)->old_allmulti = vlan_dev->allmulti;
+		}
+
+		/* looking for addresses to add to master's list */
+		for (dmi = vlan_dev->mc_list; dmi != NULL; dmi = dmi->next) {
+			if (vlan_should_add_mc(dmi, VLAN_DEV_INFO(vlan_dev)->old_mc_list)) {
+				dev_mc_add(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
+				printk(KERN_DEBUG "%s: add %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address to master interface\n",
+				       vlan_dev->name,
+				       dmi->dmi_addr[0],
+				       dmi->dmi_addr[1],
+				       dmi->dmi_addr[2],
+				       dmi->dmi_addr[3],
+				       dmi->dmi_addr[4],
+				       dmi->dmi_addr[5]);
+			}
+		}
+
+		/* looking for addresses to delete from master's list */
+		for (dmi = VLAN_DEV_INFO(vlan_dev)->old_mc_list; dmi != NULL; dmi = dmi->next) {
+			if (vlan_should_add_mc(dmi, vlan_dev->mc_list)) {
+				/* if we think we should add it to the new list, then we should really
+				 * delete it from the real list on the underlying device.
+				 */
+				dev_mc_delete(real_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
+				printk(KERN_DEBUG "%s: del %.2x:%.2x:%.2x:%.2x:%.2x:%.2x mcast address from master interface\n",
+				       vlan_dev->name,
+				       dmi->dmi_addr[0],
+				       dmi->dmi_addr[1],
+				       dmi->dmi_addr[2],
+				       dmi->dmi_addr[3],
+				       dmi->dmi_addr[4],
+				       dmi->dmi_addr[5]);
+			}
+		}
+
+		/* save multicast list */
+		vlan_copy_mc_list(vlan_dev->mc_list, VLAN_DEV_INFO(vlan_dev));
+	}
+}
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
new file mode 100644
index 0000000..c32d27a
--- /dev/null
+++ b/net/8021q/vlanproc.c
@@ -0,0 +1,357 @@
+/******************************************************************************
+ * vlanproc.c	VLAN Module. /proc filesystem interface.
+ *
+ *		This module is completely hardware-independent and provides
+ *		access to the router using Linux /proc filesystem.
+ *
+ * Author:	Ben Greear, <greearb@candelatech.com> coppied from wanproc.c
+ *               by: Gene Kozin	<genek@compuserve.com>
+ *
+ * Copyright:	(c) 1998 Ben Greear
+ *
+ *		This program is free software; you can redistribute it and/or
+ *		modify it under the terms of the GNU General Public License
+ *		as published by the Free Software Foundation; either version
+ *		2 of the License, or (at your option) any later version.
+ * ============================================================================
+ * Jan 20, 1998        Ben Greear     Initial Version
+ *****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/stddef.h>	/* offsetof(), etc. */
+#include <linux/errno.h>	/* return codes */
+#include <linux/kernel.h>
+#include <linux/slab.h>		/* kmalloc(), kfree() */
+#include <linux/mm.h>		/* verify_area(), etc. */
+#include <linux/string.h>	/* inline mem*, str* functions */
+#include <linux/init.h>		/* __initfunc et al. */
+#include <asm/byteorder.h>	/* htons(), etc. */
+#include <asm/uaccess.h>	/* copy_to_user */
+#include <asm/io.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/fs.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+#include "vlanproc.h"
+#include "vlan.h"
+
+/****** Function Prototypes *************************************************/
+
+/* Methods for preparing data for reading proc entries */
+static int vlan_seq_show(struct seq_file *seq, void *v);
+static void *vlan_seq_start(struct seq_file *seq, loff_t *pos);
+static void *vlan_seq_next(struct seq_file *seq, void *v, loff_t *pos);
+static void vlan_seq_stop(struct seq_file *seq, void *);
+static int vlandev_seq_show(struct seq_file *seq, void *v);
+
+/*
+ *	Global Data
+ */
+
+
+/*
+ *	Names of the proc directory entries 
+ */
+
+static const char name_root[]	 = "vlan";
+static const char name_conf[]	 = "config";
+
+/*
+ *	Structures for interfacing with the /proc filesystem.
+ *	VLAN creates its own directory /proc/net/vlan with the folowing
+ *	entries:
+ *	config		device status/configuration
+ *	<device>	entry for each  device
+ */
+
+/*
+ *	Generic /proc/net/vlan/<file> file and inode operations 
+ */
+
+static struct seq_operations vlan_seq_ops = {
+	.start = vlan_seq_start,
+	.next = vlan_seq_next,
+	.stop = vlan_seq_stop,
+	.show = vlan_seq_show,
+};
+
+static int vlan_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &vlan_seq_ops);
+}
+
+static struct file_operations vlan_fops = {
+	.owner	 = THIS_MODULE,
+	.open    = vlan_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release,
+};
+
+/*
+ *	/proc/net/vlan/<device> file and inode operations
+ */
+
+static int vlandev_seq_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, vlandev_seq_show, PDE(inode)->data);
+}
+
+static struct file_operations vlandev_fops = {
+	.owner = THIS_MODULE,
+	.open    = vlandev_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = single_release,
+};
+
+/*
+ * Proc filesystem derectory entries.
+ */
+
+/*
+ *	/proc/net/vlan 
+ */
+
+static struct proc_dir_entry *proc_vlan_dir;
+
+/*
+ *	/proc/net/vlan/config 
+ */
+
+static struct proc_dir_entry *proc_vlan_conf;
+
+/* Strings */
+static const char *vlan_name_type_str[VLAN_NAME_TYPE_HIGHEST] = {
+    [VLAN_NAME_TYPE_RAW_PLUS_VID]       = "VLAN_NAME_TYPE_RAW_PLUS_VID",
+    [VLAN_NAME_TYPE_PLUS_VID_NO_PAD]	= "VLAN_NAME_TYPE_PLUS_VID_NO_PAD",
+    [VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD]= "VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD",
+    [VLAN_NAME_TYPE_PLUS_VID]		= "VLAN_NAME_TYPE_PLUS_VID",
+};
+/*
+ *	Interface functions
+ */
+
+/*
+ *	Clean up /proc/net/vlan entries
+ */
+
+void vlan_proc_cleanup(void)
+{
+	if (proc_vlan_conf)
+		remove_proc_entry(name_conf, proc_vlan_dir);
+
+	if (proc_vlan_dir)
+		proc_net_remove(name_root);
+
+	/* Dynamically added entries should be cleaned up as their vlan_device
+	 * is removed, so we should not have to take care of it here...
+	 */
+}
+
+/*
+ *	Create /proc/net/vlan entries
+ */
+
+int __init vlan_proc_init(void)
+{
+	proc_vlan_dir = proc_mkdir(name_root, proc_net);
+	if (proc_vlan_dir) {
+		proc_vlan_conf = create_proc_entry(name_conf,
+						   S_IFREG|S_IRUSR|S_IWUSR,
+						   proc_vlan_dir);
+		if (proc_vlan_conf) {
+			proc_vlan_conf->proc_fops = &vlan_fops;
+			return 0;
+		}
+	}
+	vlan_proc_cleanup();
+	return -ENOBUFS;
+}
+
+/*
+ *	Add directory entry for VLAN device.
+ */
+
+int vlan_proc_add_dev (struct net_device *vlandev)
+{
+	struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
+
+	if (!(vlandev->priv_flags & IFF_802_1Q_VLAN)) {
+		printk(KERN_ERR
+		       "ERROR:	vlan_proc_add, device -:%s:- is NOT a VLAN\n",
+		       vlandev->name);
+		return -EINVAL;
+	}
+
+	dev_info->dent = create_proc_entry(vlandev->name,
+					   S_IFREG|S_IRUSR|S_IWUSR,
+					   proc_vlan_dir);
+	if (!dev_info->dent)
+		return -ENOBUFS;
+
+	dev_info->dent->proc_fops = &vlandev_fops;
+	dev_info->dent->data = vlandev;
+
+#ifdef VLAN_DEBUG
+	printk(KERN_ERR "vlan_proc_add, device -:%s:- being added.\n",
+	       vlandev->name);
+#endif
+	return 0;
+}
+
+/*
+ *	Delete directory entry for VLAN device.
+ */
+int vlan_proc_rem_dev(struct net_device *vlandev)
+{
+	if (!vlandev) {
+		printk(VLAN_ERR "%s: invalid argument: %p\n",
+			__FUNCTION__, vlandev);
+		return -EINVAL;
+	}
+
+	if (!(vlandev->priv_flags & IFF_802_1Q_VLAN)) {
+		printk(VLAN_DBG "%s: invalid argument, device: %s is not a VLAN device, priv_flags: 0x%4hX.\n",
+			__FUNCTION__, vlandev->name, vlandev->priv_flags);
+		return -EINVAL;
+	}
+
+#ifdef VLAN_DEBUG
+	printk(VLAN_DBG "%s: dev: %p\n", __FUNCTION__, vlandev);
+#endif
+
+	/** NOTE:  This will consume the memory pointed to by dent, it seems. */
+	if (VLAN_DEV_INFO(vlandev)->dent) {
+		remove_proc_entry(VLAN_DEV_INFO(vlandev)->dent->name, proc_vlan_dir);
+		VLAN_DEV_INFO(vlandev)->dent = NULL;
+	}
+
+	return 0;
+}
+
+/****** Proc filesystem entry points ****************************************/
+
+/*
+ * The following few functions build the content of /proc/net/vlan/config
+ */
+
+/* starting at dev, find a VLAN device */
+static struct net_device *vlan_skip(struct net_device *dev) 
+{
+	while (dev && !(dev->priv_flags & IFF_802_1Q_VLAN)) 
+		dev = dev->next;
+
+	return dev;
+}
+
+/* start read of /proc/net/vlan/config */ 
+static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct net_device *dev;
+	loff_t i = 1;
+
+	read_lock(&dev_base_lock);
+
+	if (*pos == 0)
+		return SEQ_START_TOKEN;
+	
+	for (dev = vlan_skip(dev_base); dev && i < *pos; 
+	     dev = vlan_skip(dev->next), ++i);
+		
+	return  (i == *pos) ? dev : NULL;
+} 
+
+static void *vlan_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+
+	return vlan_skip((v == SEQ_START_TOKEN)  
+			    ? dev_base 
+			    : ((struct net_device *)v)->next);
+}
+
+static void vlan_seq_stop(struct seq_file *seq, void *v)
+{
+	read_unlock(&dev_base_lock);
+}
+
+static int vlan_seq_show(struct seq_file *seq, void *v)
+{
+	if (v == SEQ_START_TOKEN) {
+		const char *nmtype = NULL;
+
+		seq_puts(seq, "VLAN Dev name	 | VLAN ID\n");
+
+		if (vlan_name_type < ARRAY_SIZE(vlan_name_type_str))
+		    nmtype =  vlan_name_type_str[vlan_name_type];
+
+		seq_printf(seq, "Name-Type: %s\n", 
+			   nmtype ? nmtype :  "UNKNOWN" );
+	} else {
+		const struct net_device *vlandev = v;
+		const struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
+
+		seq_printf(seq, "%-15s| %d  | %s\n",  vlandev->name,  
+			   dev_info->vlan_id,    dev_info->real_dev->name);
+	}
+	return 0;
+}
+
+static int vlandev_seq_show(struct seq_file *seq, void *offset)
+{
+	struct net_device *vlandev = (struct net_device *) seq->private;
+	const struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
+	struct net_device_stats *stats;
+	static const char fmt[] = "%30s %12lu\n";
+	int i;
+
+	if ((vlandev == NULL) || (!(vlandev->priv_flags & IFF_802_1Q_VLAN)))
+		return 0;
+
+	seq_printf(seq, "%s  VID: %d	 REORDER_HDR: %i  dev->priv_flags: %hx\n",
+		       vlandev->name, dev_info->vlan_id,
+		       (int)(dev_info->flags & 1), vlandev->priv_flags);
+
+
+	stats = vlan_dev_get_stats(vlandev);
+
+	seq_printf(seq, fmt, "total frames received", stats->rx_packets);
+	seq_printf(seq, fmt, "total bytes received", stats->rx_bytes);
+	seq_printf(seq, fmt, "Broadcast/Multicast Rcvd", stats->multicast);
+	seq_puts(seq, "\n");
+	seq_printf(seq, fmt, "total frames transmitted", stats->tx_packets);
+	seq_printf(seq, fmt, "total bytes transmitted", stats->tx_bytes);
+	seq_printf(seq, fmt, "total headroom inc", 
+		   dev_info->cnt_inc_headroom_on_tx);
+	seq_printf(seq, fmt, "total encap on xmit", 
+		   dev_info->cnt_encap_on_xmit);
+	seq_printf(seq, "Device: %s", dev_info->real_dev->name);
+	/* now show all PRIORITY mappings relating to this VLAN */
+	seq_printf(seq, 
+		       "\nINGRESS priority mappings: 0:%lu  1:%lu  2:%lu  3:%lu  4:%lu  5:%lu  6:%lu 7:%lu\n",
+		       dev_info->ingress_priority_map[0],
+		       dev_info->ingress_priority_map[1],
+		       dev_info->ingress_priority_map[2],
+		       dev_info->ingress_priority_map[3],
+		       dev_info->ingress_priority_map[4],
+		       dev_info->ingress_priority_map[5],
+		       dev_info->ingress_priority_map[6],
+		       dev_info->ingress_priority_map[7]);
+
+	seq_printf(seq, "EGRESSS priority Mappings: ");
+	for (i = 0; i < 16; i++) {
+		const struct vlan_priority_tci_mapping *mp
+			= dev_info->egress_priority_map[i];
+		while (mp) {
+			seq_printf(seq, "%lu:%hu ",
+				   mp->priority, ((mp->vlan_qos >> 13) & 0x7));
+			mp = mp->next;
+		}
+	}
+	seq_puts(seq, "\n");
+
+	return 0;
+}
diff --git a/net/8021q/vlanproc.h b/net/8021q/vlanproc.h
new file mode 100644
index 0000000..f908ee3
--- /dev/null
+++ b/net/8021q/vlanproc.h
@@ -0,0 +1,19 @@
+#ifndef __BEN_VLAN_PROC_INC__
+#define __BEN_VLAN_PROC_INC__
+
+#ifdef CONFIG_PROC_FS
+int vlan_proc_init(void);
+int vlan_proc_rem_dev(struct net_device *vlandev);
+int vlan_proc_add_dev (struct net_device *vlandev);
+void vlan_proc_cleanup (void);
+
+#else /* No CONFIG_PROC_FS */
+
+#define vlan_proc_init()	(0)
+#define vlan_proc_cleanup()	do {} while(0)
+#define vlan_proc_add_dev(dev)	({(void)(dev), 0;})
+#define vlan_proc_rem_dev(dev)	({(void)(dev), 0;})
+
+#endif
+
+#endif /* !(__BEN_VLAN_PROC_INC__) */