summaryrefslogtreecommitdiffstats
path: root/mm
diff options
context:
space:
mode:
authorMichal Hocko <mhocko@suse.cz>2013-09-12 15:13:21 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-09-12 15:38:00 -0700
commit3b38722efd9f66da63bbbd41520c2e6fa9db3d68 (patch)
treeaeec255d0358051b8ffe83f6744a2054b383c62e /mm
parentc33bd8354f3a3bb26a98d2b6bf600b7b35657328 (diff)
downloadop-kernel-dev-3b38722efd9f66da63bbbd41520c2e6fa9db3d68.zip
op-kernel-dev-3b38722efd9f66da63bbbd41520c2e6fa9db3d68.tar.gz
memcg, vmscan: integrate soft reclaim tighter with zone shrinking code
This patchset is sitting out of tree for quite some time without any objections. I would be really happy if it made it into 3.12. I do not want to push it too hard but I think this work is basically ready and waiting more doesn't help. The basic idea is quite simple. Pull soft reclaim into shrink_zone in the first step and get rid of the previous soft reclaim infrastructure. shrink_zone is done in two passes now. First it tries to do the soft limit reclaim and it falls back to reclaim-all mode if no group is over the limit or no pages have been scanned. The second pass happens at the same priority so the only time we waste is the memcg tree walk which has been updated in the third step to have only negligible overhead. As a bonus we will get rid of a _lot_ of code by this and soft reclaim will not stand out like before when it wasn't integrated into the zone shrinking code and it reclaimed at priority 0 (the testing results show that some workloads suffers from such an aggressive reclaim). The clean up is in a separate patch because I felt it would be easier to review that way. The second step is soft limit reclaim integration into targeted reclaim. It should be rather straight forward. Soft limit has been used only for the global reclaim so far but it makes sense for any kind of pressure coming from up-the-hierarchy, including targeted reclaim. The third step (patches 4-8) addresses the tree walk overhead by enhancing memcg iterators to enable skipping whole subtrees and tracking number of over soft limit children at each level of the hierarchy. This information is updated same way the old soft limit tree was updated (from memcg_check_events) so we shouldn't see an additional overhead. In fact mem_cgroup_update_soft_limit is much simpler than tree manipulation done previously. __shrink_zone uses mem_cgroup_soft_reclaim_eligible as a predicate for mem_cgroup_iter so the decision whether a particular group should be visited is done at the iterator level which allows us to decide to skip the whole subtree as well (if there is no child in excess). This reduces the tree walk overhead considerably. * TEST 1 ======== My primary test case was a parallel kernel build with 2 groups (make is running with -j8 with a distribution .config in a separate cgroup without any hard limit) on a 32 CPU machine booted with 1GB memory and both builds run taskset to Node 0 cpus. I was mostly interested in 2 setups. Default - no soft limit set and - and 0 soft limit set to both groups. The first one should tell us whether the rework regresses the default behavior while the second one should show us improvements in an extreme case where both workloads are always over the soft limit. /usr/bin/time -v has been used to collect the statistics and each configuration had 3 runs after fresh boot without any other load on the system. base is mmotm-2013-07-18-16-40 rework all 8 patches applied on top of base * No-limit User no-limit/base: min: 651.92 max: 672.65 avg: 664.33 std: 8.01 runs: 6 no-limit/rework: min: 657.34 [100.8%] max: 668.39 [99.4%] avg: 663.13 [99.8%] std: 3.61 runs: 6 System no-limit/base: min: 69.33 max: 71.39 avg: 70.32 std: 0.79 runs: 6 no-limit/rework: min: 69.12 [99.7%] max: 71.05 [99.5%] avg: 70.04 [99.6%] std: 0.59 runs: 6 Elapsed no-limit/base: min: 398.27 max: 422.36 avg: 408.85 std: 7.74 runs: 6 no-limit/rework: min: 386.36 [97.0%] max: 438.40 [103.8%] avg: 416.34 [101.8%] std: 18.85 runs: 6 The results are within noise. Elapsed time has a bigger variance but the average looks good. * 0-limit User 0-limit/base: min: 573.76 max: 605.63 avg: 585.73 std: 12.21 runs: 6 0-limit/rework: min: 645.77 [112.6%] max: 666.25 [110.0%] avg: 656.97 [112.2%] std: 7.77 runs: 6 System 0-limit/base: min: 69.57 max: 71.13 avg: 70.29 std: 0.54 runs: 6 0-limit/rework: min: 68.68 [98.7%] max: 71.40 [100.4%] avg: 69.91 [99.5%] std: 0.87 runs: 6 Elapsed 0-limit/base: min: 1306.14 max: 1550.17 avg: 1430.35 std: 90.86 runs: 6 0-limit/rework: min: 404.06 [30.9%] max: 465.94 [30.1%] avg: 434.81 [30.4%] std: 22.68 runs: 6 The improvement is really huge here (even bigger than with my previous testing and I suspect that this highly depends on the storage). Page fault statistics tell us at least part of the story: Minor 0-limit/base: min: 37180461.00 max: 37319986.00 avg: 37247470.00 std: 54772.71 runs: 6 0-limit/rework: min: 36751685.00 [98.8%] max: 36805379.00 [98.6%] avg: 36774506.33 [98.7%] std: 17109.03 runs: 6 Major 0-limit/base: min: 170604.00 max: 221141.00 avg: 196081.83 std: 18217.01 runs: 6 0-limit/rework: min: 2864.00 [1.7%] max: 10029.00 [4.5%] avg: 5627.33 [2.9%] std: 2252.71 runs: 6 Same as with my previous testing Minor faults are more or less within noise but Major fault count is way bellow the base kernel. While this looks as a nice win it is fair to say that 0-limit configuration is quite artificial. So I was playing with 0-no-limit loads as well. * TEST 2 ======== The following results are from 2 groups configuration on a 16GB machine (single NUMA node). - A running stream IO (dd if=/dev/zero of=local.file bs=1024) with 2*TotalMem with 0 soft limit. - B running a mem_eater which consumes TotalMem-1G without any limit. The mem_eater consumes the memory in 100 chunks with 1s nap after each mmap+poppulate so that both loads have chance to fight for the memory. The expected result is that B shouldn't be reclaimed and A shouldn't see a big dropdown in elapsed time. User base: min: 2.68 max: 2.89 avg: 2.76 std: 0.09 runs: 3 rework: min: 3.27 [122.0%] max: 3.74 [129.4%] avg: 3.44 [124.6%] std: 0.21 runs: 3 System base: min: 86.26 max: 88.29 avg: 87.28 std: 0.83 runs: 3 rework: min: 81.05 [94.0%] max: 84.96 [96.2%] avg: 83.14 [95.3%] std: 1.61 runs: 3 Elapsed base: min: 317.28 max: 332.39 avg: 325.84 std: 6.33 runs: 3 rework: min: 281.53 [88.7%] max: 298.16 [89.7%] avg: 290.99 [89.3%] std: 6.98 runs: 3 System time improved slightly as well as Elapsed. My previous testing has shown worse numbers but this again seem to depend on the storage speed. My theory is that the writeback doesn't catch up and prio-0 soft reclaim falls into wait on writeback page too often in the base kernel. The patched kernel doesn't do that because the soft reclaim is done from the kswapd/direct reclaim context. This can be seen on the following graph nicely. The A's group usage_in_bytes regurarly drops really low very often. All 3 runs http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/stream.png resp. a detail of the single run http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/stream-one-run.png mem_eater seems to be doing better as well. It gets to the full allocation size faster as can be seen on the following graph: http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/mem_eater-one-run.png /proc/meminfo collected during the test also shows that rework kernel hasn't swapped that much (well almost not at all): base: max: 123900 K avg: 56388.29 K rework: max: 300 K avg: 128.68 K kswapd and direct reclaim statistics are of no use unfortunatelly because soft reclaim is not accounted properly as the counters are hidden by global_reclaim() checks in the base kernel. * TEST 3 ======== Another test was the same configuration as TEST2 except the stream IO was replaced by a single kbuild (16 parallel jobs bound to Node0 cpus same as in TEST1) and mem_eater allocated TotalMem-200M so kbuild had only 200MB left. Kbuild did better with the rework kernel here as well: User base: min: 860.28 max: 872.86 avg: 868.03 std: 5.54 runs: 3 rework: min: 880.81 [102.4%] max: 887.45 [101.7%] avg: 883.56 [101.8%] std: 2.83 runs: 3 System base: min: 84.35 max: 85.06 avg: 84.79 std: 0.31 runs: 3 rework: min: 85.62 [101.5%] max: 86.09 [101.2%] avg: 85.79 [101.2%] std: 0.21 runs: 3 Elapsed base: min: 135.36 max: 243.30 avg: 182.47 std: 45.12 runs: 3 rework: min: 110.46 [81.6%] max: 116.20 [47.8%] avg: 114.15 [62.6%] std: 2.61 runs: 3 Minor base: min: 36635476.00 max: 36673365.00 avg: 36654812.00 std: 15478.03 runs: 3 rework: min: 36639301.00 [100.0%] max: 36695541.00 [100.1%] avg: 36665511.00 [100.0%] std: 23118.23 runs: 3 Major base: min: 14708.00 max: 53328.00 avg: 31379.00 std: 16202.24 runs: 3 rework: min: 302.00 [2.1%] max: 414.00 [0.8%] avg: 366.33 [1.2%] std: 47.22 runs: 3 Again we can see a significant improvement in Elapsed (it also seems to be more stable), there is a huge dropdown for the Major page faults and much more swapping: base: max: 583736 K avg: 112547.43 K rework: max: 4012 K avg: 124.36 K Graphs from all three runs show the variability of the kbuild quite nicely. It even seems that it took longer after every run with the base kernel which would be quite surprising as the source tree for the build is removed and caches are dropped after each run so the build operates on a freshly extracted sources everytime. http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/kbuild-mem_eater.png My other testing shows that this is just a matter of timing and other runs behave differently the std for Elapsed time is similar ~50. Example of other three runs: http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/kbuild-mem_eater2.png So to wrap this up. The series is still doing good and improves the soft limit. The testing results for bunch of cgroups with both stream IO and kbuild loads can be found in "memcg: track children in soft limit excess to improve soft limit". This patch: Memcg soft reclaim has been traditionally triggered from the global reclaim paths before calling shrink_zone. mem_cgroup_soft_limit_reclaim then picked up a group which exceeds the soft limit the most and reclaimed it with 0 priority to reclaim at least SWAP_CLUSTER_MAX pages. The infrastructure requires per-node-zone trees which hold over-limit groups and keep them up-to-date (via memcg_check_events) which is not cost free. Although this overhead hasn't turned out to be a bottle neck the implementation is suboptimal because mem_cgroup_update_tree has no idea which zones consumed memory over the limit so we could easily end up having a group on a node-zone tree having only few pages from that node-zone. This patch doesn't try to fix node-zone trees management because it seems that integrating soft reclaim into zone shrinking sounds much easier and more appropriate for several reasons. First of all 0 priority reclaim was a crude hack which might lead to big stalls if the group's LRUs are big and hard to reclaim (e.g. a lot of dirty/writeback pages). Soft reclaim should be applicable also to the targeted reclaim which is awkward right now without additional hacks. Last but not least the whole infrastructure eats quite some code. After this patch shrink_zone is done in 2 passes. First it tries to do the soft reclaim if appropriate (only for global reclaim for now to keep compatible with the original state) and fall back to ignoring soft limit if no group is eligible to soft reclaim or nothing has been scanned during the first pass. Only groups which are over their soft limit or any of their parents up the hierarchy is over the limit are considered eligible during the first pass. Soft limit tree which is not necessary anymore will be removed in the follow up patch to make this patch smaller and easier to review. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ying Han <yinghan@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Glauber Costa <glommer@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'mm')
-rw-r--r--mm/memcontrol.c163
-rw-r--r--mm/vmscan.c62
2 files changed, 57 insertions, 168 deletions
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index fe6b9f9..6c32271 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2004,57 +2004,28 @@ static bool mem_cgroup_reclaimable(struct mem_cgroup *memcg, bool noswap)
}
#endif
-static int mem_cgroup_soft_reclaim(struct mem_cgroup *root_memcg,
- struct zone *zone,
- gfp_t gfp_mask,
- unsigned long *total_scanned)
-{
- struct mem_cgroup *victim = NULL;
- int total = 0;
- int loop = 0;
- unsigned long excess;
- unsigned long nr_scanned;
- struct mem_cgroup_reclaim_cookie reclaim = {
- .zone = zone,
- .priority = 0,
- };
-
- excess = res_counter_soft_limit_excess(&root_memcg->res) >> PAGE_SHIFT;
-
- while (1) {
- victim = mem_cgroup_iter(root_memcg, victim, &reclaim);
- if (!victim) {
- loop++;
- if (loop >= 2) {
- /*
- * If we have not been able to reclaim
- * anything, it might because there are
- * no reclaimable pages under this hierarchy
- */
- if (!total)
- break;
- /*
- * We want to do more targeted reclaim.
- * excess >> 2 is not to excessive so as to
- * reclaim too much, nor too less that we keep
- * coming back to reclaim from this cgroup
- */
- if (total >= (excess >> 2) ||
- (loop > MEM_CGROUP_MAX_RECLAIM_LOOPS))
- break;
- }
- continue;
- }
- if (!mem_cgroup_reclaimable(victim, false))
- continue;
- total += mem_cgroup_shrink_node_zone(victim, gfp_mask, false,
- zone, &nr_scanned);
- *total_scanned += nr_scanned;
- if (!res_counter_soft_limit_excess(&root_memcg->res))
- break;
+/*
+ * A group is eligible for the soft limit reclaim if it is
+ * a) is over its soft limit
+ * b) any parent up the hierarchy is over its soft limit
+ */
+bool mem_cgroup_soft_reclaim_eligible(struct mem_cgroup *memcg)
+{
+ struct mem_cgroup *parent = memcg;
+
+ if (res_counter_soft_limit_excess(&memcg->res))
+ return true;
+
+ /*
+ * If any parent up the hierarchy is over its soft limit then we
+ * have to obey and reclaim from this group as well.
+ */
+ while((parent = parent_mem_cgroup(parent))) {
+ if (res_counter_soft_limit_excess(&parent->res))
+ return true;
}
- mem_cgroup_iter_break(root_memcg, victim);
- return total;
+
+ return false;
}
/*
@@ -4727,98 +4698,6 @@ static int mem_cgroup_resize_memsw_limit(struct mem_cgroup *memcg,
return ret;
}
-unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
- gfp_t gfp_mask,
- unsigned long *total_scanned)
-{
- unsigned long nr_reclaimed = 0;
- struct mem_cgroup_per_zone *mz, *next_mz = NULL;
- unsigned long reclaimed;
- int loop = 0;
- struct mem_cgroup_tree_per_zone *mctz;
- unsigned long long excess;
- unsigned long nr_scanned;
-
- if (order > 0)
- return 0;
-
- mctz = soft_limit_tree_node_zone(zone_to_nid(zone), zone_idx(zone));
- /*
- * This loop can run a while, specially if mem_cgroup's continuously
- * keep exceeding their soft limit and putting the system under
- * pressure
- */
- do {
- if (next_mz)
- mz = next_mz;
- else
- mz = mem_cgroup_largest_soft_limit_node(mctz);
- if (!mz)
- break;
-
- nr_scanned = 0;
- reclaimed = mem_cgroup_soft_reclaim(mz->memcg, zone,
- gfp_mask, &nr_scanned);
- nr_reclaimed += reclaimed;
- *total_scanned += nr_scanned;
- spin_lock(&mctz->lock);
-
- /*
- * If we failed to reclaim anything from this memory cgroup
- * it is time to move on to the next cgroup
- */
- next_mz = NULL;
- if (!reclaimed) {
- do {
- /*
- * Loop until we find yet another one.
- *
- * By the time we get the soft_limit lock
- * again, someone might have aded the
- * group back on the RB tree. Iterate to
- * make sure we get a different mem.
- * mem_cgroup_largest_soft_limit_node returns
- * NULL if no other cgroup is present on
- * the tree
- */
- next_mz =
- __mem_cgroup_largest_soft_limit_node(mctz);
- if (next_mz == mz)
- css_put(&next_mz->memcg->css);
- else /* next_mz == NULL or other memcg */
- break;
- } while (1);
- }
- __mem_cgroup_remove_exceeded(mz->memcg, mz, mctz);
- excess = res_counter_soft_limit_excess(&mz->memcg->res);
- /*
- * One school of thought says that we should not add
- * back the node to the tree if reclaim returns 0.
- * But our reclaim could return 0, simply because due
- * to priority we are exposing a smaller subset of
- * memory to reclaim from. Consider this as a longer
- * term TODO.
- */
- /* If excess == 0, no tree ops */
- __mem_cgroup_insert_exceeded(mz->memcg, mz, mctz, excess);
- spin_unlock(&mctz->lock);
- css_put(&mz->memcg->css);
- loop++;
- /*
- * Could not reclaim anything and there are no more
- * mem cgroups to try or we seem to be looping without
- * reclaiming anything.
- */
- if (!nr_reclaimed &&
- (next_mz == NULL ||
- loop > MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS))
- break;
- } while (!nr_reclaimed);
- if (next_mz)
- css_put(&next_mz->memcg->css);
- return nr_reclaimed;
-}
-
/**
* mem_cgroup_force_empty_list - clears LRU of a group
* @memcg: group to clear
diff --git a/mm/vmscan.c b/mm/vmscan.c
index fe715da..cf46438 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -139,11 +139,21 @@ static bool global_reclaim(struct scan_control *sc)
{
return !sc->target_mem_cgroup;
}
+
+static bool mem_cgroup_should_soft_reclaim(struct scan_control *sc)
+{
+ return !mem_cgroup_disabled() && global_reclaim(sc);
+}
#else
static bool global_reclaim(struct scan_control *sc)
{
return true;
}
+
+static bool mem_cgroup_should_soft_reclaim(struct scan_control *sc)
+{
+ return false;
+}
#endif
unsigned long zone_reclaimable_pages(struct zone *zone)
@@ -2130,7 +2140,8 @@ static inline bool should_continue_reclaim(struct zone *zone,
}
}
-static void shrink_zone(struct zone *zone, struct scan_control *sc)
+static void
+__shrink_zone(struct zone *zone, struct scan_control *sc, bool soft_reclaim)
{
unsigned long nr_reclaimed, nr_scanned;
@@ -2149,6 +2160,12 @@ static void shrink_zone(struct zone *zone, struct scan_control *sc)
do {
struct lruvec *lruvec;
+ if (soft_reclaim &&
+ !mem_cgroup_soft_reclaim_eligible(memcg)) {
+ memcg = mem_cgroup_iter(root, memcg, &reclaim);
+ continue;
+ }
+
lruvec = mem_cgroup_zone_lruvec(zone, memcg);
shrink_lruvec(lruvec, sc);
@@ -2179,6 +2196,24 @@ static void shrink_zone(struct zone *zone, struct scan_control *sc)
sc->nr_scanned - nr_scanned, sc));
}
+
+static void shrink_zone(struct zone *zone, struct scan_control *sc)
+{
+ bool do_soft_reclaim = mem_cgroup_should_soft_reclaim(sc);
+ unsigned long nr_scanned = sc->nr_scanned;
+
+ __shrink_zone(zone, sc, do_soft_reclaim);
+
+ /*
+ * No group is over the soft limit or those that are do not have
+ * pages in the zone we are reclaiming so we have to reclaim everybody
+ */
+ if (do_soft_reclaim && (sc->nr_scanned == nr_scanned)) {
+ __shrink_zone(zone, sc, false);
+ return;
+ }
+}
+
/* Returns true if compaction should go ahead for a high-order request */
static inline bool compaction_ready(struct zone *zone, struct scan_control *sc)
{
@@ -2240,8 +2275,6 @@ static bool shrink_zones(struct zonelist *zonelist, struct scan_control *sc)
{
struct zoneref *z;
struct zone *zone;
- unsigned long nr_soft_reclaimed;
- unsigned long nr_soft_scanned;
bool aborted_reclaim = false;
/*
@@ -2281,18 +2314,6 @@ static bool shrink_zones(struct zonelist *zonelist, struct scan_control *sc)
continue;
}
}
- /*
- * This steals pages from memory cgroups over softlimit
- * and returns the number of reclaimed pages and
- * scanned pages. This works for global memory pressure
- * and balancing, not for a memcg's limit.
- */
- nr_soft_scanned = 0;
- nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone,
- sc->order, sc->gfp_mask,
- &nr_soft_scanned);
- sc->nr_reclaimed += nr_soft_reclaimed;
- sc->nr_scanned += nr_soft_scanned;
/* need some check for avoid more shrink_zone() */
}
@@ -2880,8 +2901,6 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order,
{
int i;
int end_zone = 0; /* Inclusive. 0 = ZONE_DMA */
- unsigned long nr_soft_reclaimed;
- unsigned long nr_soft_scanned;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.priority = DEF_PRIORITY,
@@ -2996,15 +3015,6 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order,
sc.nr_scanned = 0;
- nr_soft_scanned = 0;
- /*
- * Call soft limit reclaim before calling shrink_zone.
- */
- nr_soft_reclaimed = mem_cgroup_soft_limit_reclaim(zone,
- order, sc.gfp_mask,
- &nr_soft_scanned);
- sc.nr_reclaimed += nr_soft_reclaimed;
-
/*
* There should be no need to raise the scanning
* priority if enough pages are already being scanned
OpenPOWER on IntegriCloud