Merge branch 'kconfig-diet' from Dave Hansen

Merge Kconfig menu diet patches from Dave Hansen:
 "I think the "Kernel Hacking" menu has gotten a bit out of hand.  It is
  over 120 lines long on my system with everything enabled and options
  are scattered around it haphazardly.

        http://sr71.net/~dave/linux/kconfig-horror.png

  Let's try to introduce some sanity.  This set takes that 120 lines
  down to 55 and makes it vastly easier to find some things.  It's a
  start.

  This set stands on its own, but there is plenty of room for follow-up
  patches.  The arch-specific debug options still end up getting stuck
  in the top-level "kernel hacking" menu.  OPTIMIZE_INLINING, for
  instance, could obviously go in to the "compiler options" menu, but
  the fact that it is defined in arch/ in a separate Kconfig file keeps
  it on its own for the moment.

  The Signed-off-by's in here look funky.  I changed employers while
  working on this set, so I have signoffs from both email addresses"

* emailed patches from Dave Hansen <dave@sr71.net>:
  hang and lockup detection menu
  kconfig: consolidate printk options
  group locking debugging options
  consolidate compilation option configs
  consolidate runtime testing configs
  order memory debugging Kconfig options
  consolidate per-arch stack overflow debugging options

1 files changed, 561 insertions, 515 deletions

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 7154f79..88c8d98 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1,3 +1,4 @@
+menu "printk and dmesg options"
 
 config PRINTK_TIME
 	bool "Show timing information on printks"
@@ -25,6 +26,123 @@ config DEFAULT_MESSAGE_LOGLEVEL
 	  that are auditing their logs closely may want to set it to a lower
 	  priority.
 
+config BOOT_PRINTK_DELAY
+	bool "Delay each boot printk message by N milliseconds"
+	depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
+	help
+	  This build option allows you to read kernel boot messages
+	  by inserting a short delay after each one.  The delay is
+	  specified in milliseconds on the kernel command line,
+	  using "boot_delay=N".
+
+	  It is likely that you would also need to use "lpj=M" to preset
+	  the "loops per jiffie" value.
+	  See a previous boot log for the "lpj" value to use for your
+	  system, and then set "lpj=M" before setting "boot_delay=N".
+	  NOTE:  Using this option may adversely affect SMP systems.
+	  I.e., processors other than the first one may not boot up.
+	  BOOT_PRINTK_DELAY also may cause LOCKUP_DETECTOR to detect
+	  what it believes to be lockup conditions.
+
+config DYNAMIC_DEBUG
+	bool "Enable dynamic printk() support"
+	default n
+	depends on PRINTK
+	depends on DEBUG_FS
+	help
+
+	  Compiles debug level messages into the kernel, which would not
+	  otherwise be available at runtime. These messages can then be
+	  enabled/disabled based on various levels of scope - per source file,
+	  function, module, format string, and line number. This mechanism
+	  implicitly compiles in all pr_debug() and dev_dbg() calls, which
+	  enlarges the kernel text size by about 2%.
+
+	  If a source file is compiled with DEBUG flag set, any
+	  pr_debug() calls in it are enabled by default, but can be
+	  disabled at runtime as below.  Note that DEBUG flag is
+	  turned on by many CONFIG_*DEBUG* options.
+
+	  Usage:
+
+	  Dynamic debugging is controlled via the 'dynamic_debug/control' file,
+	  which is contained in the 'debugfs' filesystem. Thus, the debugfs
+	  filesystem must first be mounted before making use of this feature.
+	  We refer the control file as: <debugfs>/dynamic_debug/control. This
+	  file contains a list of the debug statements that can be enabled. The
+	  format for each line of the file is:
+
+		filename:lineno [module]function flags format
+
+	  filename : source file of the debug statement
+	  lineno : line number of the debug statement
+	  module : module that contains the debug statement
+	  function : function that contains the debug statement
+          flags : '=p' means the line is turned 'on' for printing
+          format : the format used for the debug statement
+
+	  From a live system:
+
+		nullarbor:~ # cat <debugfs>/dynamic_debug/control
+		# filename:lineno [module]function flags format
+		fs/aio.c:222 [aio]__put_ioctx =_ "__put_ioctx:\040freeing\040%p\012"
+		fs/aio.c:248 [aio]ioctx_alloc =_ "ENOMEM:\040nr_events\040too\040high\012"
+		fs/aio.c:1770 [aio]sys_io_cancel =_ "calling\040cancel\012"
+
+	  Example usage:
+
+		// enable the message at line 1603 of file svcsock.c
+		nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+						<debugfs>/dynamic_debug/control
+
+		// enable all the messages in file svcsock.c
+		nullarbor:~ # echo -n 'file svcsock.c +p' >
+						<debugfs>/dynamic_debug/control
+
+		// enable all the messages in the NFS server module
+		nullarbor:~ # echo -n 'module nfsd +p' >
+						<debugfs>/dynamic_debug/control
+
+		// enable all 12 messages in the function svc_process()
+		nullarbor:~ # echo -n 'func svc_process +p' >
+						<debugfs>/dynamic_debug/control
+
+		// disable all 12 messages in the function svc_process()
+		nullarbor:~ # echo -n 'func svc_process -p' >
+						<debugfs>/dynamic_debug/control
+
+	  See Documentation/dynamic-debug-howto.txt for additional information.
+
+endmenu # "printk and dmesg options"
+
+menu "Compile-time checks and compiler options"
+
+config DEBUG_INFO
+	bool "Compile the kernel with debug info"
+	depends on DEBUG_KERNEL
+	help
+          If you say Y here the resulting kernel image will include
+	  debugging info resulting in a larger kernel image.
+	  This adds debug symbols to the kernel and modules (gcc -g), and
+	  is needed if you intend to use kernel crashdump or binary object
+	  tools like crash, kgdb, LKCD, gdb, etc on the kernel.
+	  Say Y here only if you plan to debug the kernel.
+
+	  If unsure, say N.
+
+config DEBUG_INFO_REDUCED
+	bool "Reduce debugging information"
+	depends on DEBUG_INFO
+	help
+	  If you say Y here gcc is instructed to generate less debugging
+	  information for structure types. This means that tools that
+	  need full debugging information (like kgdb or systemtap) won't
+	  be happy. But if you merely need debugging information to
+	  resolve line numbers there is no loss. Advantage is that
+	  build directory object sizes shrink dramatically over a full
+	  DEBUG_INFO build and compile times are reduced too.
+	  Only works with newer gcc versions.
+
 config ENABLE_WARN_DEPRECATED
 	bool "Enable __deprecated logic"
 	default y
@@ -52,20 +170,6 @@ config FRAME_WARN
 	  Setting it to 0 disables the warning.
 	  Requires gcc 4.4
 
-config MAGIC_SYSRQ
-	bool "Magic SysRq key"
-	depends on !UML
-	help
-	  If you say Y here, you will have some control over the system even
-	  if the system crashes for example during kernel debugging (e.g., you
-	  will be able to flush the buffer cache to disk, reboot the system
-	  immediately or dump some status information). This is accomplished
-	  by pressing various keys while holding SysRq (Alt+PrintScreen). It
-	  also works on a serial console (on PC hardware at least), if you
-	  send a BREAK and then within 5 seconds a command keypress. The
-	  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
-	  unless you really know what this hack does.
-
 config STRIP_ASM_SYMS
 	bool "Strip assembler-generated symbols during link"
 	default n
@@ -156,12 +260,341 @@ config DEBUG_SECTION_MISMATCH
 	  - Enable verbose reporting from modpost in order to help resolve
 	    the section mismatches that are reported.
 
+#
+# Select this config option from the architecture Kconfig, if it
+# is preferred to always offer frame pointers as a config
+# option on the architecture (regardless of KERNEL_DEBUG):
+#
+config ARCH_WANT_FRAME_POINTERS
+	bool
+	help
+
+config FRAME_POINTER
+	bool "Compile the kernel with frame pointers"
+	depends on DEBUG_KERNEL && \
+		(CRIS || M68K || FRV || UML || \
+		 AVR32 || SUPERH || BLACKFIN || MN10300 || METAG) || \
+		ARCH_WANT_FRAME_POINTERS
+	default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
+	help
+	  If you say Y here the resulting kernel image will be slightly
+	  larger and slower, but it gives very useful debugging information
+	  in case of kernel bugs. (precise oopses/stacktraces/warnings)
+
+config DEBUG_FORCE_WEAK_PER_CPU
+	bool "Force weak per-cpu definitions"
+	depends on DEBUG_KERNEL
+	help
+	  s390 and alpha require percpu variables in modules to be
+	  defined weak to work around addressing range issue which
+	  puts the following two restrictions on percpu variable
+	  definitions.
+
+	  1. percpu symbols must be unique whether static or not
+	  2. percpu variables can't be defined inside a function
+
+	  To ensure that generic code follows the above rules, this
+	  option forces all percpu variables to be defined as weak.
+
+endmenu # "Compiler options"
+
+config MAGIC_SYSRQ
+	bool "Magic SysRq key"
+	depends on !UML
+	help
+	  If you say Y here, you will have some control over the system even
+	  if the system crashes for example during kernel debugging (e.g., you
+	  will be able to flush the buffer cache to disk, reboot the system
+	  immediately or dump some status information). This is accomplished
+	  by pressing various keys while holding SysRq (Alt+PrintScreen). It
+	  also works on a serial console (on PC hardware at least), if you
+	  send a BREAK and then within 5 seconds a command keypress. The
+	  keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+	  unless you really know what this hack does.
+
 config DEBUG_KERNEL
 	bool "Kernel debugging"
 	help
 	  Say Y here if you are developing drivers or trying to debug and
 	  identify kernel problems.
 
+menu "Memory Debugging"
+
+source mm/Kconfig.debug
+
+config DEBUG_OBJECTS
+	bool "Debug object operations"
+	depends on DEBUG_KERNEL
+	help
+	  If you say Y here, additional code will be inserted into the
+	  kernel to track the life time of various objects and validate
+	  the operations on those objects.
+
+config DEBUG_OBJECTS_SELFTEST
+	bool "Debug objects selftest"
+	depends on DEBUG_OBJECTS
+	help
+	  This enables the selftest of the object debug code.
+
+config DEBUG_OBJECTS_FREE
+	bool "Debug objects in freed memory"
+	depends on DEBUG_OBJECTS
+	help
+	  This enables checks whether a k/v free operation frees an area
+	  which contains an object which has not been deactivated
+	  properly. This can make kmalloc/kfree-intensive workloads
+	  much slower.
+
+config DEBUG_OBJECTS_TIMERS
+	bool "Debug timer objects"
+	depends on DEBUG_OBJECTS
+	help
+	  If you say Y here, additional code will be inserted into the
+	  timer routines to track the life time of timer objects and
+	  validate the timer operations.
+
+config DEBUG_OBJECTS_WORK
+	bool "Debug work objects"
+	depends on DEBUG_OBJECTS
+	help
+	  If you say Y here, additional code will be inserted into the
+	  work queue routines to track the life time of work objects and
+	  validate the work operations.
+
+config DEBUG_OBJECTS_RCU_HEAD
+	bool "Debug RCU callbacks objects"
+	depends on DEBUG_OBJECTS
+	help
+	  Enable this to turn on debugging of RCU list heads (call_rcu() usage).
+
+config DEBUG_OBJECTS_PERCPU_COUNTER
+	bool "Debug percpu counter objects"
+	depends on DEBUG_OBJECTS
+	help
+	  If you say Y here, additional code will be inserted into the
+	  percpu counter routines to track the life time of percpu counter
+	  objects and validate the percpu counter operations.
+
+config DEBUG_OBJECTS_ENABLE_DEFAULT
+	int "debug_objects bootup default value (0-1)"
+        range 0 1
+        default "1"
+        depends on DEBUG_OBJECTS
+        help
+          Debug objects boot parameter default value
+
+config DEBUG_SLAB
+	bool "Debug slab memory allocations"
+	depends on DEBUG_KERNEL && SLAB && !KMEMCHECK
+	help
+	  Say Y here to have the kernel do limited verification on memory
+	  allocation as well as poisoning memory on free to catch use of freed
+	  memory. This can make kmalloc/kfree-intensive workloads much slower.
+
+config DEBUG_SLAB_LEAK
+	bool "Memory leak debugging"
+	depends on DEBUG_SLAB
+
+config SLUB_DEBUG_ON
+	bool "SLUB debugging on by default"
+	depends on SLUB && SLUB_DEBUG && !KMEMCHECK
+	default n
+	help
+	  Boot with debugging on by default. SLUB boots by default with
+	  the runtime debug capabilities switched off. Enabling this is
+	  equivalent to specifying the "slub_debug" parameter on boot.
+	  There is no support for more fine grained debug control like
+	  possible with slub_debug=xxx. SLUB debugging may be switched
+	  off in a kernel built with CONFIG_SLUB_DEBUG_ON by specifying
+	  "slub_debug=-".
+
+config SLUB_STATS
+	default n
+	bool "Enable SLUB performance statistics"
+	depends on SLUB && SYSFS
+	help
+	  SLUB statistics are useful to debug SLUBs allocation behavior in
+	  order find ways to optimize the allocator. This should never be
+	  enabled for production use since keeping statistics slows down
+	  the allocator by a few percentage points. The slabinfo command
+	  supports the determination of the most active slabs to figure
+	  out which slabs are relevant to a particular load.
+	  Try running: slabinfo -DA
+
+config HAVE_DEBUG_KMEMLEAK
+	bool
+
+config DEBUG_KMEMLEAK
+	bool "Kernel memory leak detector"
+	depends on DEBUG_KERNEL && HAVE_DEBUG_KMEMLEAK
+	select DEBUG_FS
+	select STACKTRACE if STACKTRACE_SUPPORT
+	select KALLSYMS
+	select CRC32
+	help
+	  Say Y here if you want to enable the memory leak
+	  detector. The memory allocation/freeing is traced in a way
+	  similar to the Boehm's conservative garbage collector, the
+	  difference being that the orphan objects are not freed but
+	  only shown in /sys/kernel/debug/kmemleak. Enabling this
+	  feature will introduce an overhead to memory
+	  allocations. See Documentation/kmemleak.txt for more
+	  details.
+
+	  Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
+	  of finding leaks due to the slab objects poisoning.
+
+	  In order to access the kmemleak file, debugfs needs to be
+	  mounted (usually at /sys/kernel/debug).
+
+config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
+	int "Maximum kmemleak early log entries"
+	depends on DEBUG_KMEMLEAK
+	range 200 40000
+	default 400
+	help
+	  Kmemleak must track all the memory allocations to avoid
+	  reporting false positives. Since memory may be allocated or
+	  freed before kmemleak is initialised, an early log buffer is
+	  used to store these actions. If kmemleak reports "early log
+	  buffer exceeded", please increase this value.
+
+config DEBUG_KMEMLEAK_TEST
+	tristate "Simple test for the kernel memory leak detector"
+	depends on DEBUG_KMEMLEAK && m
+	help
+	  This option enables a module that explicitly leaks memory.
+
+	  If unsure, say N.
+
+config DEBUG_KMEMLEAK_DEFAULT_OFF
+	bool "Default kmemleak to off"
+	depends on DEBUG_KMEMLEAK
+	help
+	  Say Y here to disable kmemleak by default. It can then be enabled
+	  on the command line via kmemleak=on.
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	depends on DEBUG_KERNEL && !IA64 && !PARISC && !METAG
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+config DEBUG_VM
+	bool "Debug VM"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on extended checks in the virtual-memory system
+          that may impact performance.
+
+	  If unsure, say N.
+
+config DEBUG_VM_RB
+	bool "Debug VM red-black trees"
+	depends on DEBUG_VM
+	help
+	  Enable this to turn on more extended checks in the virtual-memory
+	  system that may impact performance.
+
+	  If unsure, say N.
+
+config DEBUG_VIRTUAL
+	bool "Debug VM translations"
+	depends on DEBUG_KERNEL && X86
+	help
+	  Enable some costly sanity checks in virtual to page code. This can
+	  catch mistakes with virt_to_page() and friends.
+
+	  If unsure, say N.
+
+config DEBUG_NOMMU_REGIONS
+	bool "Debug the global anon/private NOMMU mapping region tree"
+	depends on DEBUG_KERNEL && !MMU
+	help
+	  This option causes the global tree of anonymous and private mapping
+	  regions to be regularly checked for invalid topology.
+
+config DEBUG_MEMORY_INIT
+	bool "Debug memory initialisation" if EXPERT
+	default !EXPERT
+	help
+	  Enable this for additional checks during memory initialisation.
+	  The sanity checks verify aspects of the VM such as the memory model
+	  and other information provided by the architecture. Verbose
+	  information will be printed at KERN_DEBUG loglevel depending
+	  on the mminit_loglevel= command-line option.
+
+	  If unsure, say Y
+
+config MEMORY_NOTIFIER_ERROR_INJECT
+	tristate "Memory hotplug notifier error injection module"
+	depends on MEMORY_HOTPLUG_SPARSE && NOTIFIER_ERROR_INJECTION
+	help
+	  This option provides the ability to inject artificial errors to
+	  memory hotplug notifier chain callbacks.  It is controlled through
+	  debugfs interface under /sys/kernel/debug/notifier-error-inject/memory
+
+	  If the notifier call chain should be failed with some events
+	  notified, write the error code to "actions/<notifier event>/error".
+
+	  Example: Inject memory hotplug offline error (-12 == -ENOMEM)
+
+	  # cd /sys/kernel/debug/notifier-error-inject/memory
+	  # echo -12 > actions/MEM_GOING_OFFLINE/error
+	  # echo offline > /sys/devices/system/memory/memoryXXX/state
+	  bash: echo: write error: Cannot allocate memory
+
+	  To compile this code as a module, choose M here: the module will
+	  be called memory-notifier-error-inject.
+
+	  If unsure, say N.
+
+config DEBUG_PER_CPU_MAPS
+	bool "Debug access to per_cpu maps"
+	depends on DEBUG_KERNEL
+	depends on SMP
+	help
+	  Say Y to verify that the per_cpu map being accessed has
+	  been set up. This adds a fair amount of code to kernel memory
+	  and decreases performance.
+
+	  Say N if unsure.
+
+config DEBUG_HIGHMEM
+	bool "Highmem debugging"
+	depends on DEBUG_KERNEL && HIGHMEM
+	help
+	  This options enables addition error checking for high memory systems.
+	  Disable for production systems.
+
+config HAVE_DEBUG_STACKOVERFLOW
+	bool
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL && HAVE_DEBUG_STACKOVERFLOW
+	---help---
+	  Say Y here if you want to check for overflows of kernel, IRQ
+	  and exception stacks (if your archicture uses them). This
+	  option will show detailed messages if free stack space drops
+	  below a certain limit.
+
+	  These kinds of bugs usually occur when call-chains in the
+	  kernel get too deep, especially when interrupts are
+	  involved.
+
+	  Use this in cases where you see apparently random memory
+	  corruption, especially if it appears in 'struct thread_info'
+
+	  If in doubt, say "N".
+
+source "lib/Kconfig.kmemcheck"
+
+endmenu # "Memory Debugging"
+
 config DEBUG_SHIRQ
 	bool "Debug shared IRQ handlers"
 	depends on DEBUG_KERNEL && GENERIC_HARDIRQS
@@ -171,6 +604,8 @@ config DEBUG_SHIRQ
 	  Drivers ought to be able to handle interrupts coming in at those
 	  points; some don't and need to be caught.
 
+menu "Debug Lockups and Hangs"
+
 config LOCKUP_DETECTOR
 	bool "Detect Hard and Soft Lockups"
 	depends on DEBUG_KERNEL && !S390
@@ -242,25 +677,6 @@ config BOOTPARAM_SOFTLOCKUP_PANIC_VALUE
 	default 0 if !BOOTPARAM_SOFTLOCKUP_PANIC
 	default 1 if BOOTPARAM_SOFTLOCKUP_PANIC
 
-config PANIC_ON_OOPS
-	bool "Panic on Oops"
-	help
-	  Say Y here to enable the kernel to panic when it oopses. This
-	  has the same effect as setting oops=panic on the kernel command
-	  line.
-
-	  This feature is useful to ensure that the kernel does not do
-	  anything erroneous after an oops which could result in data
-	  corruption or other issues.
-
-	  Say N if unsure.
-
-config PANIC_ON_OOPS_VALUE
-	int
-	range 0 1
-	default 0 if !PANIC_ON_OOPS
-	default 1 if PANIC_ON_OOPS
-
 config DETECT_HUNG_TASK
 	bool "Detect Hung Tasks"
 	depends on DEBUG_KERNEL
@@ -315,6 +731,27 @@ config BOOTPARAM_HUNG_TASK_PANIC_VALUE
 	default 0 if !BOOTPARAM_HUNG_TASK_PANIC
 	default 1 if BOOTPARAM_HUNG_TASK_PANIC
 
+endmenu # "Debug lockups and hangs"
+
+config PANIC_ON_OOPS
+	bool "Panic on Oops"
+	help
+	  Say Y here to enable the kernel to panic when it oopses. This
+	  has the same effect as setting oops=panic on the kernel command
+	  line.
+
+	  This feature is useful to ensure that the kernel does not do
+	  anything erroneous after an oops which could result in data
+	  corruption or other issues.
+
+	  Say N if unsure.
+
+config PANIC_ON_OOPS_VALUE
+	int
+	range 0 1
+	default 0 if !PANIC_ON_OOPS
+	default 1 if PANIC_ON_OOPS
+
 config SCHED_DEBUG
 	bool "Collect scheduler debugging info"
 	depends on DEBUG_KERNEL && PROC_FS
@@ -350,158 +787,6 @@ config TIMER_STATS
 	  (it defaults to deactivated on bootup and will only be activated
 	  if some application like powertop activates it explicitly).
 
-config DEBUG_OBJECTS
-	bool "Debug object operations"
-	depends on DEBUG_KERNEL
-	help
-	  If you say Y here, additional code will be inserted into the
-	  kernel to track the life time of various objects and validate
-	  the operations on those objects.
-
-config DEBUG_OBJECTS_SELFTEST
-	bool "Debug objects selftest"
-	depends on DEBUG_OBJECTS
-	help
-	  This enables the selftest of the object debug code.
-
-config DEBUG_OBJECTS_FREE
-	bool "Debug objects in freed memory"
-	depends on DEBUG_OBJECTS
-	help
-	  This enables checks whether a k/v free operation frees an area
-	  which contains an object which has not been deactivated
-	  properly. This can make kmalloc/kfree-intensive workloads
-	  much slower.
-
-config DEBUG_OBJECTS_TIMERS
-	bool "Debug timer objects"
-	depends on DEBUG_OBJECTS
-	help
-	  If you say Y here, additional code will be inserted into the
-	  timer routines to track the life time of timer objects and
-	  validate the timer operations.
-
-config DEBUG_OBJECTS_WORK
-	bool "Debug work objects"
-	depends on DEBUG_OBJECTS
-	help
-	  If you say Y here, additional code will be inserted into the
-	  work queue routines to track the life time of work objects and
-	  validate the work operations.
-
-config DEBUG_OBJECTS_RCU_HEAD
-	bool "Debug RCU callbacks objects"
-	depends on DEBUG_OBJECTS
-	help
-	  Enable this to turn on debugging of RCU list heads (call_rcu() usage).
-
-config DEBUG_OBJECTS_PERCPU_COUNTER
-	bool "Debug percpu counter objects"
-	depends on DEBUG_OBJECTS
-	help
-	  If you say Y here, additional code will be inserted into the
-	  percpu counter routines to track the life time of percpu counter
-	  objects and validate the percpu counter operations.
-
-config DEBUG_OBJECTS_ENABLE_DEFAULT
-	int "debug_objects bootup default value (0-1)"
-        range 0 1
-        default "1"
-        depends on DEBUG_OBJECTS
-        help
-          Debug objects boot parameter default value
-
-config DEBUG_SLAB
-	bool "Debug slab memory allocations"
-	depends on DEBUG_KERNEL && SLAB && !KMEMCHECK
-	help
-	  Say Y here to have the kernel do limited verification on memory
-	  allocation as well as poisoning memory on free to catch use of freed
-	  memory. This can make kmalloc/kfree-intensive workloads much slower.
-
-config DEBUG_SLAB_LEAK
-	bool "Memory leak debugging"
-	depends on DEBUG_SLAB
-
-config SLUB_DEBUG_ON
-	bool "SLUB debugging on by default"
-	depends on SLUB && SLUB_DEBUG && !KMEMCHECK
-	default n
-	help
-	  Boot with debugging on by default. SLUB boots by default with
-	  the runtime debug capabilities switched off. Enabling this is
-	  equivalent to specifying the "slub_debug" parameter on boot.
-	  There is no support for more fine grained debug control like
-	  possible with slub_debug=xxx. SLUB debugging may be switched
-	  off in a kernel built with CONFIG_SLUB_DEBUG_ON by specifying
-	  "slub_debug=-".
-
-config SLUB_STATS
-	default n
-	bool "Enable SLUB performance statistics"
-	depends on SLUB && SYSFS
-	help
-	  SLUB statistics are useful to debug SLUBs allocation behavior in
-	  order find ways to optimize the allocator. This should never be
-	  enabled for production use since keeping statistics slows down
-	  the allocator by a few percentage points. The slabinfo command
-	  supports the determination of the most active slabs to figure
-	  out which slabs are relevant to a particular load.
-	  Try running: slabinfo -DA
-
-config HAVE_DEBUG_KMEMLEAK
-	bool
-
-config DEBUG_KMEMLEAK
-	bool "Kernel memory leak detector"
-	depends on DEBUG_KERNEL && HAVE_DEBUG_KMEMLEAK
-	select DEBUG_FS
-	select STACKTRACE if STACKTRACE_SUPPORT
-	select KALLSYMS
-	select CRC32
-	help
-	  Say Y here if you want to enable the memory leak
-	  detector. The memory allocation/freeing is traced in a way
-	  similar to the Boehm's conservative garbage collector, the
-	  difference being that the orphan objects are not freed but
-	  only shown in /sys/kernel/debug/kmemleak. Enabling this
-	  feature will introduce an overhead to memory
-	  allocations. See Documentation/kmemleak.txt for more
-	  details.
-
-	  Enabling DEBUG_SLAB or SLUB_DEBUG may increase the chances
-	  of finding leaks due to the slab objects poisoning.
-
-	  In order to access the kmemleak file, debugfs needs to be
-	  mounted (usually at /sys/kernel/debug).
-
-config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
-	int "Maximum kmemleak early log entries"
-	depends on DEBUG_KMEMLEAK
-	range 200 40000
-	default 400
-	help
-	  Kmemleak must track all the memory allocations to avoid
-	  reporting false positives. Since memory may be allocated or
-	  freed before kmemleak is initialised, an early log buffer is
-	  used to store these actions. If kmemleak reports "early log
-	  buffer exceeded", please increase this value.
-
-config DEBUG_KMEMLEAK_TEST
-	tristate "Simple test for the kernel memory leak detector"
-	depends on DEBUG_KMEMLEAK && m
-	help
-	  This option enables a module that explicitly leaks memory.
-
-	  If unsure, say N.
-
-config DEBUG_KMEMLEAK_DEFAULT_OFF
-	bool "Default kmemleak to off"
-	depends on DEBUG_KMEMLEAK
-	help
-	  Say Y here to disable kmemleak by default. It can then be enabled
-	  on the command line via kmemleak=on.
-
 config DEBUG_PREEMPT
 	bool "Debug preemptible kernel"
 	depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
@@ -512,6 +797,8 @@ config DEBUG_PREEMPT
 	  if kernel code uses it in a preemption-unsafe way. Also, the kernel
 	  will detect preemption count underflows.
 
+menu "Lock Debugging (spinlocks, mutexes, etc...)"
+
 config DEBUG_RT_MUTEXES
 	bool "RT Mutex debugging, deadlock detection"
 	depends on DEBUG_KERNEL && RT_MUTEXES
@@ -654,12 +941,6 @@ config DEBUG_LOCKDEP
 	  additional runtime checks to debug itself, at the price
 	  of more runtime overhead.
 
-config TRACE_IRQFLAGS
-	bool
-	help
-	  Enables hooks to interrupt enabling and disabling for
-	  either tracing or lock debugging.
-
 config DEBUG_ATOMIC_SLEEP
 	bool "Sleep inside atomic section checking"
 	select PREEMPT_COUNT
@@ -681,18 +962,17 @@ config DEBUG_LOCKING_API_SELFTESTS
 	  The following locking APIs are covered: spinlocks, rwlocks,
 	  mutexes and rwsems.
 
-config STACKTRACE
-	bool
-	depends on STACKTRACE_SUPPORT
+endmenu # lock debugging
 
-config DEBUG_STACK_USAGE
-	bool "Stack utilization instrumentation"
-	depends on DEBUG_KERNEL && !IA64 && !PARISC && !METAG
+config TRACE_IRQFLAGS
+	bool
 	help
-	  Enables the display of the minimum amount of free stack which each
-	  task has ever had available in the sysrq-T and sysrq-P debug output.
+	  Enables hooks to interrupt enabling and disabling for
+	  either tracing or lock debugging.
 
-	  This option will slow down process creation somewhat.
+config STACKTRACE
+	bool
+	depends on STACKTRACE_SUPPORT
 
 config DEBUG_KOBJECT
 	bool "kobject debugging"
@@ -701,13 +981,6 @@ config DEBUG_KOBJECT
 	  If you say Y here, some extra kobject debugging messages will be sent
 	  to the syslog. 
 
-config DEBUG_HIGHMEM
-	bool "Highmem debugging"
-	depends on DEBUG_KERNEL && HIGHMEM
-	help
-	  This options enables addition error checking for high memory systems.
-	  Disable for production systems.
-
 config HAVE_DEBUG_BUGVERBOSE
 	bool
 
@@ -720,66 +993,6 @@ config DEBUG_BUGVERBOSE
 	  of the BUG call as well as the EIP and oops trace.  This aids
 	  debugging but costs about 70-100K of memory.
 
-config DEBUG_INFO
-	bool "Compile the kernel with debug info"
-	depends on DEBUG_KERNEL
-	help
-          If you say Y here the resulting kernel image will include
-	  debugging info resulting in a larger kernel image.
-	  This adds debug symbols to the kernel and modules (gcc -g), and
-	  is needed if you intend to use kernel crashdump or binary object
-	  tools like crash, kgdb, LKCD, gdb, etc on the kernel.
-	  Say Y here only if you plan to debug the kernel.
-
-	  If unsure, say N.
-
-config DEBUG_INFO_REDUCED
-	bool "Reduce debugging information"
-	depends on DEBUG_INFO
-	help
-	  If you say Y here gcc is instructed to generate less debugging
-	  information for structure types. This means that tools that
-	  need full debugging information (like kgdb or systemtap) won't
-	  be happy. But if you merely need debugging information to
-	  resolve line numbers there is no loss. Advantage is that
-	  build directory object sizes shrink dramatically over a full
-	  DEBUG_INFO build and compile times are reduced too.
-	  Only works with newer gcc versions.
-
-config DEBUG_VM
-	bool "Debug VM"
-	depends on DEBUG_KERNEL
-	help
-	  Enable this to turn on extended checks in the virtual-memory system
-          that may impact performance.
-
-	  If unsure, say N.
-
-config DEBUG_VM_RB
-	bool "Debug VM red-black trees"
-	depends on DEBUG_VM
-	help
-	  Enable this to turn on more extended checks in the virtual-memory
-	  system that may impact performance.
-
-	  If unsure, say N.
-
-config DEBUG_VIRTUAL
-	bool "Debug VM translations"
-	depends on DEBUG_KERNEL && X86
-	help
-	  Enable some costly sanity checks in virtual to page code. This can
-	  catch mistakes with virt_to_page() and friends.
-
-	  If unsure, say N.
-
-config DEBUG_NOMMU_REGIONS
-	bool "Debug the global anon/private NOMMU mapping region tree"
-	depends on DEBUG_KERNEL && !MMU
-	help
-	  This option causes the global tree of anonymous and private mapping
-	  regions to be regularly checked for invalid topology.
-
 config DEBUG_WRITECOUNT
 	bool "Debug filesystem writers count"
 	depends on DEBUG_KERNEL
@@ -790,18 +1003,6 @@ config DEBUG_WRITECOUNT
 
 	  If unsure, say N.
 
-config DEBUG_MEMORY_INIT
-	bool "Debug memory initialisation" if EXPERT
-	default !EXPERT
-	help
-	  Enable this for additional checks during memory initialisation.
-	  The sanity checks verify aspects of the VM such as the memory model
-	  and other information provided by the architecture. Verbose
-	  information will be printed at KERN_DEBUG loglevel depending
-	  on the mminit_loglevel= command-line option.
-
-	  If unsure, say Y
-
 config DEBUG_LIST
 	bool "Debug linked list manipulation"
 	depends on DEBUG_KERNEL
@@ -811,15 +1012,6 @@ config DEBUG_LIST
 
 	  If unsure, say N.
 
-config TEST_LIST_SORT
-	bool "Linked list sorting test"
-	depends on DEBUG_KERNEL
-	help
-	  Enable this to turn on 'list_sort()' function test. This test is
-	  executed only once during system boot, so affects only boot time.
-
-	  If unsure, say N.
-
 config DEBUG_SG
 	bool "Debug SG table operations"
 	depends on DEBUG_KERNEL
@@ -855,45 +1047,6 @@ config DEBUG_CREDENTIALS
 
 	  If unsure, say N.
 
-#
-# Select this config option from the architecture Kconfig, if it
-# is preferred to always offer frame pointers as a config
-# option on the architecture (regardless of KERNEL_DEBUG):
-#
-config ARCH_WANT_FRAME_POINTERS
-	bool
-	help
-
-config FRAME_POINTER
-	bool "Compile the kernel with frame pointers"
-	depends on DEBUG_KERNEL && \
-		(CRIS || M68K || FRV || UML || \
-		 AVR32 || SUPERH || BLACKFIN || MN10300 || METAG) || \
-		ARCH_WANT_FRAME_POINTERS
-	default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
-	help
-	  If you say Y here the resulting kernel image will be slightly
-	  larger and slower, but it gives very useful debugging information
-	  in case of kernel bugs. (precise oopses/stacktraces/warnings)
-
-config BOOT_PRINTK_DELAY
-	bool "Delay each boot printk message by N milliseconds"
-	depends on DEBUG_KERNEL && PRINTK && GENERIC_CALIBRATE_DELAY
-	help
-	  This build option allows you to read kernel boot messages
-	  by inserting a short delay after each one.  The delay is
-	  specified in milliseconds on the kernel command line,
-	  using "boot_delay=N".
-
-	  It is likely that you would also need to use "lpj=M" to preset
-	  the "loops per jiffie" value.
-	  See a previous boot log for the "lpj" value to use for your
-	  system, and then set "lpj=M" before setting "boot_delay=N".
-	  NOTE:  Using this option may adversely affect SMP systems.
-	  I.e., processors other than the first one may not boot up.
-	  BOOT_PRINTK_DELAY also may cause LOCKUP_DETECTOR to detect
-	  what it believes to be lockup conditions.
-
 menu "RCU Debugging"
 
 config PROVE_RCU
@@ -1032,33 +1185,6 @@ config RCU_TRACE
 
 endmenu # "RCU Debugging"
 
-config KPROBES_SANITY_TEST
-	bool "Kprobes sanity tests"
-	depends on DEBUG_KERNEL
-	depends on KPROBES
-	default n
-	help
-	  This option provides for testing basic kprobes functionality on
-	  boot. A sample kprobe, jprobe and kretprobe are inserted and
-	  verified for functionality.
-
-	  Say N if you are unsure.
-
-config BACKTRACE_SELF_TEST
-	tristate "Self test for the backtrace code"
-	depends on DEBUG_KERNEL
-	default n
-	help
-	  This option provides a kernel module that can be used to test
-	  the kernel stack backtrace code. This option is not useful
-	  for distributions or general kernels, but only for kernel
-	  developers working on architecture code.
-
-	  Note that if you want to also test saved backtraces, you will
-	  have to enable STACKTRACE as well.
-
-	  Say N if you are unsure.
-
 config DEBUG_BLOCK_EXT_DEVT
         bool "Force extended block device numbers and spread them"
 	depends on DEBUG_KERNEL
@@ -1086,47 +1212,6 @@ config DEBUG_BLOCK_EXT_DEVT
 
 	  Say N if you are unsure.
 
-config DEBUG_FORCE_WEAK_PER_CPU
-	bool "Force weak per-cpu definitions"
-	depends on DEBUG_KERNEL
-	help
-	  s390 and alpha require percpu variables in modules to be
-	  defined weak to work around addressing range issue which
-	  puts the following two restrictions on percpu variable
-	  definitions.
-
-	  1. percpu symbols must be unique whether static or not
-	  2. percpu variables can't be defined inside a function
-
-	  To ensure that generic code follows the above rules, this
-	  option forces all percpu variables to be defined as weak.
-
-config DEBUG_PER_CPU_MAPS
-	bool "Debug access to per_cpu maps"
-	depends on DEBUG_KERNEL
-	depends on SMP
-	help
-	  Say Y to verify that the per_cpu map being accessed has
-	  been set up. This adds a fair amount of code to kernel memory
-	  and decreases performance.
-
-	  Say N if unsure.
-
-config LKDTM
-	tristate "Linux Kernel Dump Test Tool Module"
-	depends on DEBUG_FS
-	depends on BLOCK
-	default n
-	help
-	This module enables testing of the different dumping mechanisms by
-	inducing system failures at predefined crash points.
-	If you don't need it: say N
-	Choose M here to compile this code as a module. The module will be
-	called lkdtm.
-
-	Documentation on how to use the module can be found in
-	Documentation/fault-injection/provoke-crashes.txt
-
 config NOTIFIER_ERROR_INJECTION
 	tristate "Notifier error injection"
 	depends on DEBUG_KERNEL
@@ -1186,29 +1271,6 @@ config PM_NOTIFIER_ERROR_INJECT
 
 	  If unsure, say N.
 
-config MEMORY_NOTIFIER_ERROR_INJECT
-	tristate "Memory hotplug notifier error injection module"
-	depends on MEMORY_HOTPLUG_SPARSE && NOTIFIER_ERROR_INJECTION
-	help
-	  This option provides the ability to inject artificial errors to
-	  memory hotplug notifier chain callbacks.  It is controlled through
-	  debugfs interface under /sys/kernel/debug/notifier-error-inject/memory
-
-	  If the notifier call chain should be failed with some events
-	  notified, write the error code to "actions/<notifier event>/error".
-
-	  Example: Inject memory hotplug offline error (-12 == -ENOMEM)
-
-	  # cd /sys/kernel/debug/notifier-error-inject/memory
-	  # echo -12 > actions/MEM_GOING_OFFLINE/error
-	  # echo offline > /sys/devices/system/memory/memoryXXX/state
-	  bash: echo: write error: Cannot allocate memory
-
-	  To compile this code as a module, choose M here: the module will
-	  be called memory-notifier-error-inject.
-
-	  If unsure, say N.
-
 config OF_RECONFIG_NOTIFIER_ERROR_INJECT
 	tristate "OF reconfig notifier error injection module"
 	depends on OF_DYNAMIC && NOTIFIER_ERROR_INJECTION
@@ -1323,9 +1385,61 @@ config DEBUG_STRICT_USER_COPY_CHECKS
 
 	  If unsure, say N.
 
-source mm/Kconfig.debug
 source kernel/trace/Kconfig
 
+menu "Runtime Testing"
+
+config LKDTM
+	tristate "Linux Kernel Dump Test Tool Module"
+	depends on DEBUG_FS
+	depends on BLOCK
+	default n
+	help
+	This module enables testing of the different dumping mechanisms by
+	inducing system failures at predefined crash points.
+	If you don't need it: say N
+	Choose M here to compile this code as a module. The module will be
+	called lkdtm.
+
+	Documentation on how to use the module can be found in
+	Documentation/fault-injection/provoke-crashes.txt
+
+config TEST_LIST_SORT
+	bool "Linked list sorting test"
+	depends on DEBUG_KERNEL
+	help
+	  Enable this to turn on 'list_sort()' function test. This test is
+	  executed only once during system boot, so affects only boot time.
+
+	  If unsure, say N.
+
+config KPROBES_SANITY_TEST
+	bool "Kprobes sanity tests"
+	depends on DEBUG_KERNEL
+	depends on KPROBES
+	default n
+	help
+	  This option provides for testing basic kprobes functionality on
+	  boot. A sample kprobe, jprobe and kretprobe are inserted and
+	  verified for functionality.
+
+	  Say N if you are unsure.
+
+config BACKTRACE_SELF_TEST
+	tristate "Self test for the backtrace code"
+	depends on DEBUG_KERNEL
+	default n
+	help
+	  This option provides a kernel module that can be used to test
+	  the kernel stack backtrace code. This option is not useful
+	  for distributions or general kernels, but only for kernel
+	  developers working on architecture code.
+
+	  Note that if you want to also test saved backtraces, you will
+	  have to enable STACKTRACE as well.
+
+	  Say N if you are unsure.
+
 config RBTREE_TEST
 	tristate "Red-Black tree test"
 	depends on m && DEBUG_KERNEL
@@ -1339,6 +1453,34 @@ config INTERVAL_TREE_TEST
 	help
 	  A benchmark measuring the performance of the interval tree library
 
+config ATOMIC64_SELFTEST
+	bool "Perform an atomic64_t self-test at boot"
+	help
+	  Enable this option to test the atomic64_t functions at boot.
+
+	  If unsure, say N.
+
+config ASYNC_RAID6_TEST
+	tristate "Self test for hardware accelerated raid6 recovery"
+	depends on ASYNC_RAID6_RECOV
+	select ASYNC_MEMCPY
+	---help---
+	  This is a one-shot self test that permutes through the
+	  recovery of all the possible two disk failure scenarios for a
+	  N-disk array.  Recovery is performed with the asynchronous
+	  raid6 recovery routines, and will optionally use an offload
+	  engine if one is available.
+
+	  If unsure, say N.
+
+config TEST_STRING_HELPERS
+	tristate "Test functions located in the string_helpers module at runtime"
+
+config TEST_KSTRTOX
+	tristate "Test kstrto*() family of functions at runtime"
+
+endmenu # runtime tests
+
 config PROVIDE_OHCI1394_DMA_INIT
 	bool "Remote debugging over FireWire early on boot"
 	depends on PCI && X86
@@ -1388,75 +1530,6 @@ config BUILD_DOCSRC
 
 	  Say N if you are unsure.
 
-config DYNAMIC_DEBUG
-	bool "Enable dynamic printk() support"
-	default n
-	depends on PRINTK
-	depends on DEBUG_FS
-	help
-
-	  Compiles debug level messages into the kernel, which would not
-	  otherwise be available at runtime. These messages can then be
-	  enabled/disabled based on various levels of scope - per source file,
-	  function, module, format string, and line number. This mechanism
-	  implicitly compiles in all pr_debug() and dev_dbg() calls, which
-	  enlarges the kernel text size by about 2%.
-
-	  If a source file is compiled with DEBUG flag set, any
-	  pr_debug() calls in it are enabled by default, but can be
-	  disabled at runtime as below.  Note that DEBUG flag is
-	  turned on by many CONFIG_*DEBUG* options.
-
-	  Usage:
-
-	  Dynamic debugging is controlled via the 'dynamic_debug/control' file,
-	  which is contained in the 'debugfs' filesystem. Thus, the debugfs
-	  filesystem must first be mounted before making use of this feature.
-	  We refer the control file as: <debugfs>/dynamic_debug/control. This
-	  file contains a list of the debug statements that can be enabled. The
-	  format for each line of the file is:
-
-		filename:lineno [module]function flags format
-
-	  filename : source file of the debug statement
-	  lineno : line number of the debug statement
-	  module : module that contains the debug statement
-	  function : function that contains the debug statement
-          flags : '=p' means the line is turned 'on' for printing
-          format : the format used for the debug statement
-
-	  From a live system:
-
-		nullarbor:~ # cat <debugfs>/dynamic_debug/control
-		# filename:lineno [module]function flags format
-		fs/aio.c:222 [aio]__put_ioctx =_ "__put_ioctx:\040freeing\040%p\012"
-		fs/aio.c:248 [aio]ioctx_alloc =_ "ENOMEM:\040nr_events\040too\040high\012"
-		fs/aio.c:1770 [aio]sys_io_cancel =_ "calling\040cancel\012"
-
-	  Example usage:
-
-		// enable the message at line 1603 of file svcsock.c
-		nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
-						<debugfs>/dynamic_debug/control
-
-		// enable all the messages in file svcsock.c
-		nullarbor:~ # echo -n 'file svcsock.c +p' >
-						<debugfs>/dynamic_debug/control
-
-		// enable all the messages in the NFS server module
-		nullarbor:~ # echo -n 'module nfsd +p' >
-						<debugfs>/dynamic_debug/control
-
-		// enable all 12 messages in the function svc_process()
-		nullarbor:~ # echo -n 'func svc_process +p' >
-						<debugfs>/dynamic_debug/control
-
-		// disable all 12 messages in the function svc_process()
-		nullarbor:~ # echo -n 'func svc_process -p' >
-						<debugfs>/dynamic_debug/control
-
-	  See Documentation/dynamic-debug-howto.txt for additional information.
-
 config DMA_API_DEBUG
 	bool "Enable debugging of DMA-API usage"
 	depends on HAVE_DMA_API_DEBUG
@@ -1468,34 +1541,7 @@ config DMA_API_DEBUG
 	  This option causes a performance degredation.  Use only if you want
 	  to debug device drivers. If unsure, say N.
 
-config ATOMIC64_SELFTEST
-	bool "Perform an atomic64_t self-test at boot"
-	help
-	  Enable this option to test the atomic64_t functions at boot.
-
-	  If unsure, say N.
-
-config ASYNC_RAID6_TEST
-	tristate "Self test for hardware accelerated raid6 recovery"
-	depends on ASYNC_RAID6_RECOV
-	select ASYNC_MEMCPY
-	---help---
-	  This is a one-shot self test that permutes through the
-	  recovery of all the possible two disk failure scenarios for a
-	  N-disk array.  Recovery is performed with the asynchronous
-	  raid6 recovery routines, and will optionally use an offload
-	  engine if one is available.
-
-	  If unsure, say N.
-
 source "samples/Kconfig"
 
 source "lib/Kconfig.kgdb"
 
-source "lib/Kconfig.kmemcheck"
-
-config TEST_STRING_HELPERS
-	tristate "Test functions located in the string_helpers module at runtime"
-
-config TEST_KSTRTOX
-	tristate "Test kstrto*() family of functions at runtime"