Merge branch 'linus' into core/iommu

Conflicts:
	arch/x86/Kconfig

15 files changed, 2966 insertions, 458 deletions

diff --git a/lib/Kconfig b/lib/Kconfig
index 03c2c24..2a9c69f 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -98,6 +98,20 @@ config LZO_DECOMPRESS
 	tristate
 
 #
+# These all provide a common interface (hence the apparent duplication with
+# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+#
+config DECOMPRESS_GZIP
+	select ZLIB_INFLATE
+	tristate
+
+config DECOMPRESS_BZIP2
+	tristate
+
+config DECOMPRESS_LZMA
+	tristate
+
+#
 # Generic allocator support is selected if needed
 #
 config GENERIC_ALLOCATOR
@@ -136,12 +150,6 @@ config TEXTSEARCH_BM
 config TEXTSEARCH_FSM
 	tristate
 
-#
-# plist support is select#ed if needed
-#
-config PLIST
-	boolean
-
 config HAS_IOMEM
 	boolean
 	depends on !NO_IOMEM
@@ -174,4 +182,10 @@ config DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
        bool "Disable obsolete cpumask functions" if DEBUG_PER_CPU_MAPS
        depends on EXPERIMENTAL && BROKEN
 
+#
+# Netlink attribute parsing support is select'ed if needed
+#
+config NLATTR
+	bool
+
 endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index d9cbada..251fa7b 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -847,60 +847,70 @@ config BUILD_DOCSRC
 
 	  Say N if you are unsure.
 
-config DYNAMIC_PRINTK_DEBUG
-	bool "Enable dynamic printk() call support"
+config DYNAMIC_DEBUG
+	bool "Enable dynamic printk() support"
 	default n
 	depends on PRINTK
+	depends on DEBUG_FS
 	select PRINTK_DEBUG
 	help
 
 	  Compiles debug level messages into the kernel, which would not
 	  otherwise be available at runtime. These messages can then be
-	  enabled/disabled on a per module basis. This mechanism implicitly
-	  enables all pr_debug() and dev_dbg() calls. The impact of this
-	  compile option is a larger kernel text size of about 2%.
+	  enabled/disabled based on various levels of scope - per source file,
+	  function, module, format string, and line number. This mechanism
+	  implicitly enables all pr_debug() and dev_dbg() calls. The impact of
+	  this compile option is a larger kernel text size of about 2%.
 
 	  Usage:
 
-	  Dynamic debugging is controlled by the debugfs file,
-	  dynamic_printk/modules. This file contains a list of the modules that
-	  can be enabled. The format of the file is the module name, followed
-	  by a set of flags that can be enabled. The first flag is always the
-	  'enabled' flag. For example:
+	  Dynamic debugging is controlled via the 'dynamic_debug/ddebug' file,
+	  which is contained in the 'debugfs' filesystem. Thus, the debugfs
+	  filesystem must first be mounted before making use of this feature.
+	  We refer the control file as: <debugfs>/dynamic_debug/ddebug. This
+	  file contains a list of the debug statements that can be enabled. The
+	  format for each line of the file is:
 
-		<module_name> <enabled=0/1>
-				.
-				.
-				.
+		filename:lineno [module]function flags format
 
-	  <module_name> : Name of the module in which the debug call resides
-	  <enabled=0/1> : whether the messages are enabled or not
+	  filename : source file of the debug statement
+	  lineno : line number of the debug statement
+	  module : module that contains the debug statement
+	  function : function that contains the debug statement
+          flags : 'p' means the line is turned 'on' for printing
+          format : the format used for the debug statement
 
 	  From a live system:
 
-		snd_hda_intel enabled=0
-		fixup enabled=0
-		driver enabled=0
+		nullarbor:~ # cat <debugfs>/dynamic_debug/ddebug
+		# filename:lineno [module]function flags format
+		fs/aio.c:222 [aio]__put_ioctx - "__put_ioctx:\040freeing\040%p\012"
+		fs/aio.c:248 [aio]ioctx_alloc - "ENOMEM:\040nr_events\040too\040high\012"
+		fs/aio.c:1770 [aio]sys_io_cancel - "calling\040cancel\012"
 
-	  Enable a module:
+	  Example usage:
 
-	  	$echo "set enabled=1 <module_name>" > dynamic_printk/modules
+		// enable the message at line 1603 of file svcsock.c
+		nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+						<debugfs>/dynamic_debug/ddebug
 
-	  Disable a module:
+		// enable all the messages in file svcsock.c
+		nullarbor:~ # echo -n 'file svcsock.c +p' >
+						<debugfs>/dynamic_debug/ddebug
 
-	  	$echo "set enabled=0 <module_name>" > dynamic_printk/modules
+		// enable all the messages in the NFS server module
+		nullarbor:~ # echo -n 'module nfsd +p' >
+						<debugfs>/dynamic_debug/ddebug
 
-	  Enable all modules:
+		// enable all 12 messages in the function svc_process()
+		nullarbor:~ # echo -n 'func svc_process +p' >
+						<debugfs>/dynamic_debug/ddebug
 
-		$echo "set enabled=1 all" > dynamic_printk/modules
+		// disable all 12 messages in the function svc_process()
+		nullarbor:~ # echo -n 'func svc_process -p' >
+						<debugfs>/dynamic_debug/ddebug
 
-	  Disable all modules:
-
-		$echo "set enabled=0 all" > dynamic_printk/modules
-
-	  Finally, passing "dynamic_printk" at the command line enables
-	  debugging for all modules. This mode can be turned off via the above
-	  disable command.
+	  See Documentation/dynamic-debug-howto.txt for additional information.
 
 config DMA_API_DEBUG
 	bool "Enable debugging of DMA-API usage"
diff --git a/lib/Makefile b/lib/Makefile
index 50b48cf..d6edd67 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 rbtree.o radix-tree.o dump_stack.o \
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
-	 proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o
+	 proportions.o prio_heap.o ratelimit.o show_mem.o \
+	 is_single_threaded.o plist.o decompress.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -40,7 +41,6 @@ lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
 lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
 obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
 obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
-obj-$(CONFIG_PLIST) += plist.o
 obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
 obj-$(CONFIG_DEBUG_LIST) += list_debug.o
 obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
@@ -65,6 +65,10 @@ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
 obj-$(CONFIG_LZO_COMPRESS) += lzo/
 obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
 
+lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
+
 obj-$(CONFIG_TEXTSEARCH) += textsearch.o
 obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
 obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
@@ -82,7 +86,9 @@ obj-$(CONFIG_HAVE_LMB) += lmb.o
 
 obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
 
-obj-$(CONFIG_DYNAMIC_PRINTK_DEBUG) += dynamic_printk.o
+obj-$(CONFIG_DYNAMIC_DEBUG) += dynamic_debug.o
+
+obj-$(CONFIG_NLATTR) += nlattr.o
 
 obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
 
diff --git a/lib/decompress.c b/lib/decompress.c
new file mode 100644
index 0000000..d2842f5
--- /dev/null
+++ b/lib/decompress.c
@@ -0,0 +1,54 @@
+/*
+ * decompress.c
+ *
+ * Detect the decompression method based on magic number
+ */
+
+#include <linux/decompress/generic.h>
+
+#include <linux/decompress/bunzip2.h>
+#include <linux/decompress/unlzma.h>
+#include <linux/decompress/inflate.h>
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifndef CONFIG_DECOMPRESS_GZIP
+# define gunzip NULL
+#endif
+#ifndef CONFIG_DECOMPRESS_BZIP2
+# define bunzip2 NULL
+#endif
+#ifndef CONFIG_DECOMPRESS_LZMA
+# define unlzma NULL
+#endif
+
+static const struct compress_format {
+	unsigned char magic[2];
+	const char *name;
+	decompress_fn decompressor;
+} compressed_formats[] = {
+	{ {037, 0213}, "gzip", gunzip },
+	{ {037, 0236}, "gzip", gunzip },
+	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+	{ {0x5d, 0x00}, "lzma", unlzma },
+	{ {0, 0}, NULL, NULL }
+};
+
+decompress_fn decompress_method(const unsigned char *inbuf, int len,
+				const char **name)
+{
+	const struct compress_format *cf;
+
+	if (len < 2)
+		return NULL;	/* Need at least this much... */
+
+	for (cf = compressed_formats; cf->name; cf++) {
+		if (!memcmp(inbuf, cf->magic, 2))
+			break;
+
+	}
+	if (name)
+		*name = cf->name;
+	return cf->decompressor;
+}
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
new file mode 100644
index 0000000..5d3ddb5
--- /dev/null
+++ b/lib/decompress_bunzip2.c
@@ -0,0 +1,735 @@
+/* vi: set sw = 4 ts = 4: */
+/*	Small bzip2 deflate implementation, by Rob Landley (rob@landley.net).
+
+	Based on bzip2 decompression code by Julian R Seward (jseward@acm.org),
+	which also acknowledges contributions by Mike Burrows, David Wheeler,
+	Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten,
+	Robert Sedgewick, and Jon L. Bentley.
+
+	This code is licensed under the LGPLv2:
+		LGPL (http://www.gnu.org/copyleft/lgpl.html
+*/
+
+/*
+	Size and speed optimizations by Manuel Novoa III  (mjn3@codepoet.org).
+
+	More efficient reading of Huffman codes, a streamlined read_bunzip()
+	function, and various other tweaks.  In (limited) tests, approximately
+	20% faster than bzcat on x86 and about 10% faster on arm.
+
+	Note that about 2/3 of the time is spent in read_unzip() reversing
+	the Burrows-Wheeler transformation.  Much of that time is delay
+	resulting from cache misses.
+
+	I would ask that anyone benefiting from this work, especially those
+	using it in commercial products, consider making a donation to my local
+	non-profit hospice organization in the name of the woman I loved, who
+	passed away Feb. 12, 2003.
+
+		In memory of Toni W. Hagan
+
+		Hospice of Acadiana, Inc.
+		2600 Johnston St., Suite 200
+		Lafayette, LA 70503-3240
+
+		Phone (337) 232-1234 or 1-800-738-2226
+		Fax   (337) 232-1297
+
+		http://www.hospiceacadiana.com/
+
+	Manuel
+ */
+
+/*
+	Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu)
+*/
+
+
+#ifndef STATIC
+#include <linux/decompress/bunzip2.h>
+#endif /* !STATIC */
+
+#include <linux/decompress/mm.h>
+
+#ifndef INT_MAX
+#define INT_MAX 0x7fffffff
+#endif
+
+/* Constants for Huffman coding */
+#define MAX_GROUPS		6
+#define GROUP_SIZE   		50	/* 64 would have been more efficient */
+#define MAX_HUFCODE_BITS 	20	/* Longest Huffman code allowed */
+#define MAX_SYMBOLS 		258	/* 256 literals + RUNA + RUNB */
+#define SYMBOL_RUNA		0
+#define SYMBOL_RUNB		1
+
+/* Status return values */
+#define RETVAL_OK			0
+#define RETVAL_LAST_BLOCK		(-1)
+#define RETVAL_NOT_BZIP_DATA		(-2)
+#define RETVAL_UNEXPECTED_INPUT_EOF	(-3)
+#define RETVAL_UNEXPECTED_OUTPUT_EOF	(-4)
+#define RETVAL_DATA_ERROR		(-5)
+#define RETVAL_OUT_OF_MEMORY		(-6)
+#define RETVAL_OBSOLETE_INPUT		(-7)
+
+/* Other housekeeping constants */
+#define BZIP2_IOBUF_SIZE		4096
+
+/* This is what we know about each Huffman coding group */
+struct group_data {
+	/* We have an extra slot at the end of limit[] for a sentinal value. */
+	int limit[MAX_HUFCODE_BITS+1];
+	int base[MAX_HUFCODE_BITS];
+	int permute[MAX_SYMBOLS];
+	int minLen, maxLen;
+};
+
+/* Structure holding all the housekeeping data, including IO buffers and
+   memory that persists between calls to bunzip */
+struct bunzip_data {
+	/* State for interrupting output loop */
+	int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent;
+	/* I/O tracking data (file handles, buffers, positions, etc.) */
+	int (*fill)(void*, unsigned int);
+	int inbufCount, inbufPos /*, outbufPos*/;
+	unsigned char *inbuf /*,*outbuf*/;
+	unsigned int inbufBitCount, inbufBits;
+	/* The CRC values stored in the block header and calculated from the
+	data */
+	unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC;
+	/* Intermediate buffer and its size (in bytes) */
+	unsigned int *dbuf, dbufSize;
+	/* These things are a bit too big to go on the stack */
+	unsigned char selectors[32768];		/* nSelectors = 15 bits */
+	struct group_data groups[MAX_GROUPS];	/* Huffman coding tables */
+	int io_error;			/* non-zero if we have IO error */
+};
+
+
+/* Return the next nnn bits of input.  All reads from the compressed input
+   are done through this function.  All reads are big endian */
+static unsigned int INIT get_bits(struct bunzip_data *bd, char bits_wanted)
+{
+	unsigned int bits = 0;
+
+	/* If we need to get more data from the byte buffer, do so.
+	   (Loop getting one byte at a time to enforce endianness and avoid
+	   unaligned access.) */
+	while (bd->inbufBitCount < bits_wanted) {
+		/* If we need to read more data from file into byte buffer, do
+		   so */
+		if (bd->inbufPos == bd->inbufCount) {
+			if (bd->io_error)
+				return 0;
+			bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE);
+			if (bd->inbufCount <= 0) {
+				bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF;
+				return 0;
+			}
+			bd->inbufPos = 0;
+		}
+		/* Avoid 32-bit overflow (dump bit buffer to top of output) */
+		if (bd->inbufBitCount >= 24) {
+			bits = bd->inbufBits&((1 << bd->inbufBitCount)-1);
+			bits_wanted -= bd->inbufBitCount;
+			bits <<= bits_wanted;
+			bd->inbufBitCount = 0;
+		}
+		/* Grab next 8 bits of input from buffer. */
+		bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+		bd->inbufBitCount += 8;
+	}
+	/* Calculate result */
+	bd->inbufBitCount -= bits_wanted;
+	bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1);
+
+	return bits;
+}
+
+/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */
+
+static int INIT get_next_block(struct bunzip_data *bd)
+{
+	struct group_data *hufGroup = NULL;
+	int *base = NULL;
+	int *limit = NULL;
+	int dbufCount, nextSym, dbufSize, groupCount, selector,
+		i, j, k, t, runPos, symCount, symTotal, nSelectors,
+		byteCount[256];
+	unsigned char uc, symToByte[256], mtfSymbol[256], *selectors;
+	unsigned int *dbuf, origPtr;
+
+	dbuf = bd->dbuf;
+	dbufSize = bd->dbufSize;
+	selectors = bd->selectors;
+
+	/* Read in header signature and CRC, then validate signature.
+	   (last block signature means CRC is for whole file, return now) */
+	i = get_bits(bd, 24);
+	j = get_bits(bd, 24);
+	bd->headerCRC = get_bits(bd, 32);
+	if ((i == 0x177245) && (j == 0x385090))
+		return RETVAL_LAST_BLOCK;
+	if ((i != 0x314159) || (j != 0x265359))
+		return RETVAL_NOT_BZIP_DATA;
+	/* We can add support for blockRandomised if anybody complains.
+	   There was some code for this in busybox 1.0.0-pre3, but nobody ever
+	   noticed that it didn't actually work. */
+	if (get_bits(bd, 1))
+		return RETVAL_OBSOLETE_INPUT;
+	origPtr = get_bits(bd, 24);
+	if (origPtr > dbufSize)
+		return RETVAL_DATA_ERROR;
+	/* mapping table: if some byte values are never used (encoding things
+	   like ascii text), the compression code removes the gaps to have fewer
+	   symbols to deal with, and writes a sparse bitfield indicating which
+	   values were present.  We make a translation table to convert the
+	   symbols back to the corresponding bytes. */
+	t = get_bits(bd, 16);
+	symTotal = 0;
+	for (i = 0; i < 16; i++) {
+		if (t&(1 << (15-i))) {
+			k = get_bits(bd, 16);
+			for (j = 0; j < 16; j++)
+				if (k&(1 << (15-j)))
+					symToByte[symTotal++] = (16*i)+j;
+		}
+	}
+	/* How many different Huffman coding groups does this block use? */
+	groupCount = get_bits(bd, 3);
+	if (groupCount < 2 || groupCount > MAX_GROUPS)
+		return RETVAL_DATA_ERROR;
+	/* nSelectors: Every GROUP_SIZE many symbols we select a new
+	   Huffman coding group.  Read in the group selector list,
+	   which is stored as MTF encoded bit runs.  (MTF = Move To
+	   Front, as each value is used it's moved to the start of the
+	   list.) */
+	nSelectors = get_bits(bd, 15);
+	if (!nSelectors)
+		return RETVAL_DATA_ERROR;
+	for (i = 0; i < groupCount; i++)
+		mtfSymbol[i] = i;
+	for (i = 0; i < nSelectors; i++) {
+		/* Get next value */
+		for (j = 0; get_bits(bd, 1); j++)
+			if (j >= groupCount)
+				return RETVAL_DATA_ERROR;
+		/* Decode MTF to get the next selector */
+		uc = mtfSymbol[j];
+		for (; j; j--)
+			mtfSymbol[j] = mtfSymbol[j-1];
+		mtfSymbol[0] = selectors[i] = uc;
+	}
+	/* Read the Huffman coding tables for each group, which code
+	   for symTotal literal symbols, plus two run symbols (RUNA,
+	   RUNB) */
+	symCount = symTotal+2;
+	for (j = 0; j < groupCount; j++) {
+		unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1];
+		int	minLen,	maxLen, pp;
+		/* Read Huffman code lengths for each symbol.  They're
+		   stored in a way similar to mtf; record a starting
+		   value for the first symbol, and an offset from the
+		   previous value for everys symbol after that.
+		   (Subtracting 1 before the loop and then adding it
+		   back at the end is an optimization that makes the
+		   test inside the loop simpler: symbol length 0
+		   becomes negative, so an unsigned inequality catches
+		   it.) */
+		t = get_bits(bd, 5)-1;
+		for (i = 0; i < symCount; i++) {
+			for (;;) {
+				if (((unsigned)t) > (MAX_HUFCODE_BITS-1))
+					return RETVAL_DATA_ERROR;
+
+				/* If first bit is 0, stop.  Else
+				   second bit indicates whether to
+				   increment or decrement the value.
+				   Optimization: grab 2 bits and unget
+				   the second if the first was 0. */
+
+				k = get_bits(bd, 2);
+				if (k < 2) {
+					bd->inbufBitCount++;
+					break;
+				}
+				/* Add one if second bit 1, else
+				 * subtract 1.  Avoids if/else */
+				t += (((k+1)&2)-1);
+			}
+			/* Correct for the initial -1, to get the
+			 * final symbol length */
+			length[i] = t+1;
+		}
+		/* Find largest and smallest lengths in this group */
+		minLen = maxLen = length[0];
+
+		for (i = 1; i < symCount; i++) {
+			if (length[i] > maxLen)
+				maxLen = length[i];
+			else if (length[i] < minLen)
+				minLen = length[i];
+		}
+
+		/* Calculate permute[], base[], and limit[] tables from
+		 * length[].
+		 *
+		 * permute[] is the lookup table for converting
+		 * Huffman coded symbols into decoded symbols.  base[]
+		 * is the amount to subtract from the value of a
+		 * Huffman symbol of a given length when using
+		 * permute[].
+		 *
+		 * limit[] indicates the largest numerical value a
+		 * symbol with a given number of bits can have.  This
+		 * is how the Huffman codes can vary in length: each
+		 * code with a value > limit[length] needs another
+		 * bit.
+		 */
+		hufGroup = bd->groups+j;
+		hufGroup->minLen = minLen;
+		hufGroup->maxLen = maxLen;
+		/* Note that minLen can't be smaller than 1, so we
+		   adjust the base and limit array pointers so we're
+		   not always wasting the first entry.  We do this
+		   again when using them (during symbol decoding).*/
+		base = hufGroup->base-1;
+		limit = hufGroup->limit-1;
+		/* Calculate permute[].  Concurently, initialize
+		 * temp[] and limit[]. */
+		pp = 0;
+		for (i = minLen; i <= maxLen; i++) {
+			temp[i] = limit[i] = 0;
+			for (t = 0; t < symCount; t++)
+				if (length[t] == i)
+					hufGroup->permute[pp++] = t;
+		}
+		/* Count symbols coded for at each bit length */
+		for (i = 0; i < symCount; i++)
+			temp[length[i]]++;
+		/* Calculate limit[] (the largest symbol-coding value
+		 *at each bit length, which is (previous limit <<
+		 *1)+symbols at this level), and base[] (number of
+		 *symbols to ignore at each bit length, which is limit
+		 *minus the cumulative count of symbols coded for
+		 *already). */
+		pp = t = 0;
+		for (i = minLen; i < maxLen; i++) {
+			pp += temp[i];
+			/* We read the largest possible symbol size
+			   and then unget bits after determining how
+			   many we need, and those extra bits could be
+			   set to anything.  (They're noise from
+			   future symbols.)  At each level we're
+			   really only interested in the first few
+			   bits, so here we set all the trailing
+			   to-be-ignored bits to 1 so they don't
+			   affect the value > limit[length]
+			   comparison. */
+			limit[i] = (pp << (maxLen - i)) - 1;
+			pp <<= 1;
+			base[i+1] = pp-(t += temp[i]);
+		}
+		limit[maxLen+1] = INT_MAX; /* Sentinal value for
+					    * reading next sym. */
+		limit[maxLen] = pp+temp[maxLen]-1;
+		base[minLen] = 0;
+	}
+	/* We've finished reading and digesting the block header.  Now
+	   read this block's Huffman coded symbols from the file and
+	   undo the Huffman coding and run length encoding, saving the
+	   result into dbuf[dbufCount++] = uc */
+
+	/* Initialize symbol occurrence counters and symbol Move To
+	 * Front table */
+	for (i = 0; i < 256; i++) {
+		byteCount[i] = 0;
+		mtfSymbol[i] = (unsigned char)i;
+	}
+	/* Loop through compressed symbols. */
+	runPos = dbufCount = symCount = selector = 0;
+	for (;;) {
+		/* Determine which Huffman coding group to use. */
+		if (!(symCount--)) {
+			symCount = GROUP_SIZE-1;
+			if (selector >= nSelectors)
+				return RETVAL_DATA_ERROR;
+			hufGroup = bd->groups+selectors[selector++];
+			base = hufGroup->base-1;
+			limit = hufGroup->limit-1;
+		}
+		/* Read next Huffman-coded symbol. */
+		/* Note: It is far cheaper to read maxLen bits and
+		   back up than it is to read minLen bits and then an
+		   additional bit at a time, testing as we go.
+		   Because there is a trailing last block (with file
+		   CRC), there is no danger of the overread causing an
+		   unexpected EOF for a valid compressed file.  As a
+		   further optimization, we do the read inline
+		   (falling back to a call to get_bits if the buffer
+		   runs dry).  The following (up to got_huff_bits:) is
+		   equivalent to j = get_bits(bd, hufGroup->maxLen);
+		 */
+		while (bd->inbufBitCount < hufGroup->maxLen) {
+			if (bd->inbufPos == bd->inbufCount) {
+				j = get_bits(bd, hufGroup->maxLen);
+				goto got_huff_bits;
+			}
+			bd->inbufBits =
+				(bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+			bd->inbufBitCount += 8;
+		};
+		bd->inbufBitCount -= hufGroup->maxLen;
+		j = (bd->inbufBits >> bd->inbufBitCount)&
+			((1 << hufGroup->maxLen)-1);
+got_huff_bits:
+		/* Figure how how many bits are in next symbol and
+		 * unget extras */
+		i = hufGroup->minLen;
+		while (j > limit[i])
+			++i;
+		bd->inbufBitCount += (hufGroup->maxLen - i);
+		/* Huffman decode value to get nextSym (with bounds checking) */
+		if ((i > hufGroup->maxLen)
+			|| (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i]))
+				>= MAX_SYMBOLS))
+			return RETVAL_DATA_ERROR;
+		nextSym = hufGroup->permute[j];
+		/* We have now decoded the symbol, which indicates
+		   either a new literal byte, or a repeated run of the
+		   most recent literal byte.  First, check if nextSym
+		   indicates a repeated run, and if so loop collecting
+		   how many times to repeat the last literal. */
+		if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */
+			/* If this is the start of a new run, zero out
+			 * counter */
+			if (!runPos) {
+				runPos = 1;
+				t = 0;
+			}
+			/* Neat trick that saves 1 symbol: instead of
+			   or-ing 0 or 1 at each bit position, add 1
+			   or 2 instead.  For example, 1011 is 1 << 0
+			   + 1 << 1 + 2 << 2.  1010 is 2 << 0 + 2 << 1
+			   + 1 << 2.  You can make any bit pattern
+			   that way using 1 less symbol than the basic
+			   or 0/1 method (except all bits 0, which
+			   would use no symbols, but a run of length 0
+			   doesn't mean anything in this context).
+			   Thus space is saved. */
+			t += (runPos << nextSym);
+			/* +runPos if RUNA; +2*runPos if RUNB */
+
+			runPos <<= 1;
+			continue;
+		}
+		/* When we hit the first non-run symbol after a run,
+		   we now know how many times to repeat the last
+		   literal, so append that many copies to our buffer
+		   of decoded symbols (dbuf) now.  (The last literal
+		   used is the one at the head of the mtfSymbol
+		   array.) */
+		if (runPos) {
+			runPos = 0;
+			if (dbufCount+t >= dbufSize)
+				return RETVAL_DATA_ERROR;
+
+			uc = symToByte[mtfSymbol[0]];
+			byteCount[uc] += t;
+			while (t--)
+				dbuf[dbufCount++] = uc;
+		}
+		/* Is this the terminating symbol? */
+		if (nextSym > symTotal)
+			break;
+		/* At this point, nextSym indicates a new literal
+		   character.  Subtract one to get the position in the
+		   MTF array at which this literal is currently to be
+		   found.  (Note that the result can't be -1 or 0,
+		   because 0 and 1 are RUNA and RUNB.  But another
+		   instance of the first symbol in the mtf array,
+		   position 0, would have been handled as part of a
+		   run above.  Therefore 1 unused mtf position minus 2
+		   non-literal nextSym values equals -1.) */
+		if (dbufCount >= dbufSize)
+			return RETVAL_DATA_ERROR;
+		i = nextSym - 1;
+		uc = mtfSymbol[i];
+		/* Adjust the MTF array.  Since we typically expect to
+		 *move only a small number of symbols, and are bound
+		 *by 256 in any case, using memmove here would
+		 *typically be bigger and slower due to function call
+		 *overhead and other assorted setup costs. */
+		do {
+			mtfSymbol[i] = mtfSymbol[i-1];
+		} while (--i);
+		mtfSymbol[0] = uc;
+		uc = symToByte[uc];
+		/* We have our literal byte.  Save it into dbuf. */
+		byteCount[uc]++;
+		dbuf[dbufCount++] = (unsigned int)uc;
+	}
+	/* At this point, we've read all the Huffman-coded symbols
+	   (and repeated runs) for this block from the input stream,
+	   and decoded them into the intermediate buffer.  There are
+	   dbufCount many decoded bytes in dbuf[].  Now undo the
+	   Burrows-Wheeler transform on dbuf.  See
+	   http://dogma.net/markn/articles/bwt/bwt.htm
+	 */
+	/* Turn byteCount into cumulative occurrence counts of 0 to n-1. */
+	j = 0;
+	for (i = 0; i < 256; i++) {
+		k = j+byteCount[i];
+		byteCount[i] = j;
+		j = k;
+	}
+	/* Figure out what order dbuf would be in if we sorted it. */
+	for (i = 0; i < dbufCount; i++) {
+		uc = (unsigned char)(dbuf[i] & 0xff);
+		dbuf[byteCount[uc]] |= (i << 8);
+		byteCount[uc]++;
+	}
+	/* Decode first byte by hand to initialize "previous" byte.
+	   Note that it doesn't get output, and if the first three
+	   characters are identical it doesn't qualify as a run (hence
+	   writeRunCountdown = 5). */
+	if (dbufCount) {
+		if (origPtr >= dbufCount)
+			return RETVAL_DATA_ERROR;
+		bd->writePos = dbuf[origPtr];
+		bd->writeCurrent = (unsigned char)(bd->writePos&0xff);
+		bd->writePos >>= 8;
+		bd->writeRunCountdown = 5;
+	}
+	bd->writeCount = dbufCount;
+
+	return RETVAL_OK;
+}
+
+/* Undo burrows-wheeler transform on intermediate buffer to produce output.
+   If start_bunzip was initialized with out_fd =-1, then up to len bytes of
+   data are written to outbuf.  Return value is number of bytes written or
+   error (all errors are negative numbers).  If out_fd!=-1, outbuf and len
+   are ignored, data is written to out_fd and return is RETVAL_OK or error.
+*/
+
+static int INIT read_bunzip(struct bunzip_data *bd, char *outbuf, int len)
+{
+	const unsigned int *dbuf;
+	int pos, xcurrent, previous, gotcount;
+
+	/* If last read was short due to end of file, return last block now */
+	if (bd->writeCount < 0)
+		return bd->writeCount;
+
+	gotcount = 0;
+	dbuf = bd->dbuf;
+	pos = bd->writePos;
+	xcurrent = bd->writeCurrent;
+
+	/* We will always have pending decoded data to write into the output
+	   buffer unless this is the very first call (in which case we haven't
+	   Huffman-decoded a block into the intermediate buffer yet). */
+
+	if (bd->writeCopies) {
+		/* Inside the loop, writeCopies means extra copies (beyond 1) */
+		--bd->writeCopies;
+		/* Loop outputting bytes */
+		for (;;) {
+			/* If the output buffer is full, snapshot
+			 * state and return */
+			if (gotcount >= len) {
+				bd->writePos = pos;
+				bd->writeCurrent = xcurrent;
+				bd->writeCopies++;
+				return len;
+			}
+			/* Write next byte into output buffer, updating CRC */
+			outbuf[gotcount++] = xcurrent;
+			bd->writeCRC = (((bd->writeCRC) << 8)
+				^bd->crc32Table[((bd->writeCRC) >> 24)
+				^xcurrent]);
+			/* Loop now if we're outputting multiple
+			 * copies of this byte */
+			if (bd->writeCopies) {
+				--bd->writeCopies;
+				continue;
+			}
+decode_next_byte:
+			if (!bd->writeCount--)
+				break;
+			/* Follow sequence vector to undo
+			 * Burrows-Wheeler transform */
+			previous = xcurrent;
+			pos = dbuf[pos];
+			xcurrent = pos&0xff;
+			pos >>= 8;
+			/* After 3 consecutive copies of the same
+			   byte, the 4th is a repeat count.  We count
+			   down from 4 instead *of counting up because
+			   testing for non-zero is faster */
+			if (--bd->writeRunCountdown) {
+				if (xcurrent != previous)
+					bd->writeRunCountdown = 4;
+			} else {
+				/* We have a repeated run, this byte
+				 * indicates the count */
+				bd->writeCopies = xcurrent;
+				xcurrent = previous;
+				bd->writeRunCountdown = 5;
+				/* Sometimes there are just 3 bytes
+				 * (run length 0) */
+				if (!bd->writeCopies)
+					goto decode_next_byte;
+				/* Subtract the 1 copy we'd output
+				 * anyway to get extras */
+				--bd->writeCopies;
+			}
+		}
+		/* Decompression of this block completed successfully */
+		bd->writeCRC = ~bd->writeCRC;
+		bd->totalCRC = ((bd->totalCRC << 1) |
+				(bd->totalCRC >> 31)) ^ bd->writeCRC;
+		/* If this block had a CRC error, force file level CRC error. */
+		if (bd->writeCRC != bd->headerCRC) {
+			bd->totalCRC = bd->headerCRC+1;
+			return RETVAL_LAST_BLOCK;
+		}
+	}
+
+	/* Refill the intermediate buffer by Huffman-decoding next
+	 * block of input */
+	/* (previous is just a convenient unused temp variable here) */
+	previous = get_next_block(bd);
+	if (previous) {
+		bd->writeCount = previous;
+		return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount;
+	}
+	bd->writeCRC = 0xffffffffUL;
+	pos = bd->writePos;
+	xcurrent = bd->writeCurrent;
+	goto decode_next_byte;
+}
+
+static int INIT nofill(void *buf, unsigned int len)
+{
+	return -1;
+}
+
+/* Allocate the structure, read file header.  If in_fd ==-1, inbuf must contain
+   a complete bunzip file (len bytes long).  If in_fd!=-1, inbuf and len are
+   ignored, and data is read from file handle into temporary buffer. */
+static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len,
+			     int (*fill)(void*, unsigned int))
+{
+	struct bunzip_data *bd;
+	unsigned int i, j, c;
+	const unsigned int BZh0 =
+		(((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16)
+		+(((unsigned int)'h') << 8)+(unsigned int)'0';
+
+	/* Figure out how much data to allocate */
+	i = sizeof(struct bunzip_data);
+
+	/* Allocate bunzip_data.  Most fields initialize to zero. */
+	bd = *bdp = malloc(i);
+	memset(bd, 0, sizeof(struct bunzip_data));
+	/* Setup input buffer */
+	bd->inbuf = inbuf;
+	bd->inbufCount = len;
+	if (fill != NULL)
+		bd->fill = fill;
+	else
+		bd->fill = nofill;
+
+	/* Init the CRC32 table (big endian) */
+	for (i = 0; i < 256; i++) {
+		c = i << 24;
+		for (j = 8; j; j--)
+			c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1);
+		bd->crc32Table[i] = c;
+	}
+
+	/* Ensure that file starts with "BZh['1'-'9']." */
+	i = get_bits(bd, 32);
+	if (((unsigned int)(i-BZh0-1)) >= 9)
+		return RETVAL_NOT_BZIP_DATA;
+
+	/* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of
+	   uncompressed data.  Allocate intermediate buffer for block. */
+	bd->dbufSize = 100000*(i-BZh0);
+
+	bd->dbuf = large_malloc(bd->dbufSize * sizeof(int));
+	return RETVAL_OK;
+}
+
+/* Example usage: decompress src_fd to dst_fd.  (Stops at end of bzip2 data,
+   not end of file.) */
+STATIC int INIT bunzip2(unsigned char *buf, int len,
+			int(*fill)(void*, unsigned int),
+			int(*flush)(void*, unsigned int),
+			unsigned char *outbuf,
+			int *pos,
+			void(*error_fn)(char *x))
+{
+	struct bunzip_data *bd;
+	int i = -1;
+	unsigned char *inbuf;
+
+	set_error_fn(error_fn);
+	if (flush)
+		outbuf = malloc(BZIP2_IOBUF_SIZE);
+	else
+		len -= 4; /* Uncompressed size hack active in pre-boot
+			     environment */
+	if (!outbuf) {
+		error("Could not allocate output bufer");
+		return -1;
+	}
+	if (buf)
+		inbuf = buf;
+	else
+		inbuf = malloc(BZIP2_IOBUF_SIZE);
+	if (!inbuf) {
+		error("Could not allocate input bufer");
+		goto exit_0;
+	}
+	i = start_bunzip(&bd, inbuf, len, fill);
+	if (!i) {
+		for (;;) {
+			i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE);
+			if (i <= 0)
+				break;
+			if (!flush)
+				outbuf += i;
+			else
+				if (i != flush(outbuf, i)) {
+					i = RETVAL_UNEXPECTED_OUTPUT_EOF;
+					break;
+				}
+		}
+	}
+	/* Check CRC and release memory */
+	if (i == RETVAL_LAST_BLOCK) {
+		if (bd->headerCRC != bd->totalCRC)
+			error("Data integrity error when decompressing.");
+		else
+			i = RETVAL_OK;
+	} else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) {
+		error("Compressed file ends unexpectedly");
+	}
+	if (bd->dbuf)
+		large_free(bd->dbuf);
+	if (pos)
+		*pos = bd->inbufPos;
+	free(bd);
+	if (!buf)
+		free(inbuf);
+exit_0:
+	if (flush)
+		free(outbuf);
+	return i;
+}
+
+#define decompress bunzip2
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
new file mode 100644
index 0000000..839a329
--- /dev/null
+++ b/lib/decompress_inflate.c
@@ -0,0 +1,167 @@
+#ifdef STATIC
+/* Pre-boot environment: included */
+
+/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots
+ * errors about console_printk etc... on ARM */
+#define _LINUX_KERNEL_H
+
+#include "zlib_inflate/inftrees.c"
+#include "zlib_inflate/inffast.c"
+#include "zlib_inflate/inflate.c"
+
+#else /* STATIC */
+/* initramfs et al: linked */
+
+#include <linux/zutil.h>
+
+#include "zlib_inflate/inftrees.h"
+#include "zlib_inflate/inffast.h"
+#include "zlib_inflate/inflate.h"
+
+#include "zlib_inflate/infutil.h"
+
+#endif /* STATIC */
+
+#include <linux/decompress/mm.h>
+
+#define INBUF_LEN (16*1024)
+
+/* Included from initramfs et al code */
+STATIC int INIT gunzip(unsigned char *buf, int len,
+		       int(*fill)(void*, unsigned int),
+		       int(*flush)(void*, unsigned int),
+		       unsigned char *out_buf,
+		       int *pos,
+		       void(*error_fn)(char *x)) {
+	u8 *zbuf;
+	struct z_stream_s *strm;
+	int rc;
+	size_t out_len;
+
+	set_error_fn(error_fn);
+	rc = -1;
+	if (flush) {
+		out_len = 0x8000; /* 32 K */
+		out_buf = malloc(out_len);
+	} else {
+		out_len = 0x7fffffff; /* no limit */
+	}
+	if (!out_buf) {
+		error("Out of memory while allocating output buffer");
+		goto gunzip_nomem1;
+	}
+
+	if (buf)
+		zbuf = buf;
+	else {
+		zbuf = malloc(INBUF_LEN);
+		len = 0;
+	}
+	if (!zbuf) {
+		error("Out of memory while allocating input buffer");
+		goto gunzip_nomem2;
+	}
+
+	strm = malloc(sizeof(*strm));
+	if (strm == NULL) {
+		error("Out of memory while allocating z_stream");
+		goto gunzip_nomem3;
+	}
+
+	strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
+				 sizeof(struct inflate_state));
+	if (strm->workspace == NULL) {
+		error("Out of memory while allocating workspace");
+		goto gunzip_nomem4;
+	}
+
+	if (len == 0)
+		len = fill(zbuf, INBUF_LEN);
+
+	/* verify the gzip header */
+	if (len < 10 ||
+	   zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) {
+		if (pos)
+			*pos = 0;
+		error("Not a gzip file");
+		goto gunzip_5;
+	}
+
+	/* skip over gzip header (1f,8b,08... 10 bytes total +
+	 * possible asciz filename)
+	 */
+	strm->next_in = zbuf + 10;
+	/* skip over asciz filename */
+	if (zbuf[3] & 0x8) {
+		while (strm->next_in[0])
+			strm->next_in++;
+		strm->next_in++;
+	}
+	strm->avail_in = len - (strm->next_in - zbuf);
+
+	strm->next_out = out_buf;
+	strm->avail_out = out_len;
+
+	rc = zlib_inflateInit2(strm, -MAX_WBITS);
+
+	if (!flush) {
+		WS(strm)->inflate_state.wsize = 0;
+		WS(strm)->inflate_state.window = NULL;
+	}
+
+	while (rc == Z_OK) {
+		if (strm->avail_in == 0) {
+			/* TODO: handle case where both pos and fill are set */
+			len = fill(zbuf, INBUF_LEN);
+			if (len < 0) {
+				rc = -1;
+				error("read error");
+				break;
+			}
+			strm->next_in = zbuf;
+			strm->avail_in = len;
+		}
+		rc = zlib_inflate(strm, 0);
+
+		/* Write any data generated */
+		if (flush && strm->next_out > out_buf) {
+			int l = strm->next_out - out_buf;
+			if (l != flush(out_buf, l)) {
+				rc = -1;
+				error("write error");
+				break;
+			}
+			strm->next_out = out_buf;
+			strm->avail_out = out_len;
+		}
+
+		/* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
+		if (rc == Z_STREAM_END) {
+			rc = 0;
+			break;
+		} else if (rc != Z_OK) {
+			error("uncompression error");
+			rc = -1;
+		}
+	}
+
+	zlib_inflateEnd(strm);
+	if (pos)
+		/* add + 8 to skip over trailer */
+		*pos = strm->next_in - zbuf+8;
+
+gunzip_5:
+	free(strm->workspace);
+gunzip_nomem4:
+	free(strm);
+gunzip_nomem3:
+	if (!buf)
+		free(zbuf);
+gunzip_nomem2:
+	if (flush)
+		free(out_buf);
+gunzip_nomem1:
+	return rc; /* returns Z_OK (0) if successful */
+}
+
+#define decompress gunzip
diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c
new file mode 100644
index 0000000..546f2f4
--- /dev/null
+++ b/lib/decompress_unlzma.c
@@ -0,0 +1,647 @@
+/* Lzma decompressor for Linux kernel. Shamelessly snarfed
+ *from busybox 1.1.1
+ *
+ *Linux kernel adaptation
+ *Copyright (C) 2006  Alain < alain@knaff.lu >
+ *
+ *Based on small lzma deflate implementation/Small range coder
+ *implementation for lzma.
+ *Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
+ *
+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ *Copyright (C) 1999-2005  Igor Pavlov
+ *
+ *Copyrights of the parts, see headers below.
+ *
+ *
+ *This program is free software; you can redistribute it and/or
+ *modify it under the terms of the GNU Lesser General Public
+ *License as published by the Free Software Foundation; either
+ *version 2.1 of the License, or (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *Lesser General Public License for more details.
+ *
+ *You should have received a copy of the GNU Lesser General Public
+ *License along with this library; if not, write to the Free Software
+ *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef STATIC
+#include <linux/decompress/unlzma.h>
+#endif /* STATIC */
+
+#include <linux/decompress/mm.h>
+
+#define	MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+static long long INIT read_int(unsigned char *ptr, int size)
+{
+	int i;
+	long long ret = 0;
+
+	for (i = 0; i < size; i++)
+		ret = (ret << 8) | ptr[size-i-1];
+	return ret;
+}
+
+#define ENDIAN_CONVERT(x) \
+  x = (typeof(x))read_int((unsigned char *)&x, sizeof(x))
+
+
+/* Small range coder implementation for lzma.
+ *Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
+ *
+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ *Copyright (c) 1999-2005  Igor Pavlov
+ */
+
+#include <linux/compiler.h>
+
+#define LZMA_IOBUF_SIZE	0x10000
+
+struct rc {
+	int (*fill)(void*, unsigned int);
+	uint8_t *ptr;
+	uint8_t *buffer;
+	uint8_t *buffer_end;
+	int buffer_size;
+	uint32_t code;
+	uint32_t range;
+	uint32_t bound;
+};
+
+
+#define RC_TOP_BITS 24
+#define RC_MOVE_BITS 5
+#define RC_MODEL_TOTAL_BITS 11
+
+
+/* Called twice: once at startup and once in rc_normalize() */
+static void INIT rc_read(struct rc *rc)
+{
+	rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE);
+	if (rc->buffer_size <= 0)
+		error("unexpected EOF");
+	rc->ptr = rc->buffer;
+	rc->buffer_end = rc->buffer + rc->buffer_size;
+}
+
+/* Called once */
+static inline void INIT rc_init(struct rc *rc,
+				       int (*fill)(void*, unsigned int),
+				       char *buffer, int buffer_size)
+{
+	rc->fill = fill;
+	rc->buffer = (uint8_t *)buffer;
+	rc->buffer_size = buffer_size;
+	rc->buffer_end = rc->buffer + rc->buffer_size;
+	rc->ptr = rc->buffer;
+
+	rc->code = 0;
+	rc->range = 0xFFFFFFFF;
+}
+
+static inline void INIT rc_init_code(struct rc *rc)
+{
+	int i;
+
+	for (i = 0; i < 5; i++) {
+		if (rc->ptr >= rc->buffer_end)
+			rc_read(rc);
+		rc->code = (rc->code << 8) | *rc->ptr++;
+	}
+}
+
+
+/* Called once. TODO: bb_maybe_free() */
+static inline void INIT rc_free(struct rc *rc)
+{
+	free(rc->buffer);
+}
+
+/* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */
+static void INIT rc_do_normalize(struct rc *rc)
+{
+	if (rc->ptr >= rc->buffer_end)
+		rc_read(rc);
+	rc->range <<= 8;
+	rc->code = (rc->code << 8) | *rc->ptr++;
+}
+static inline void INIT rc_normalize(struct rc *rc)
+{
+	if (rc->range < (1 << RC_TOP_BITS))
+		rc_do_normalize(rc);
+}
+
+/* Called 9 times */
+/* Why rc_is_bit_0_helper exists?
+ *Because we want to always expose (rc->code < rc->bound) to optimizer
+ */
+static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p)
+{
+	rc_normalize(rc);
+	rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS);
+	return rc->bound;
+}
+static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p)
+{
+	uint32_t t = rc_is_bit_0_helper(rc, p);
+	return rc->code < t;
+}
+
+/* Called ~10 times, but very small, thus inlined */
+static inline void INIT rc_update_bit_0(struct rc *rc, uint16_t *p)
+{
+	rc->range = rc->bound;
+	*p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS;
+}
+static inline void rc_update_bit_1(struct rc *rc, uint16_t *p)
+{
+	rc->range -= rc->bound;
+	rc->code -= rc->bound;
+	*p -= *p >> RC_MOVE_BITS;
+}
+
+/* Called 4 times in unlzma loop */
+static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol)
+{
+	if (rc_is_bit_0(rc, p)) {
+		rc_update_bit_0(rc, p);
+		*symbol *= 2;
+		return 0;
+	} else {
+		rc_update_bit_1(rc, p);
+		*symbol = *symbol * 2 + 1;
+		return 1;
+	}
+}
+
+/* Called once */
+static inline int INIT rc_direct_bit(struct rc *rc)
+{
+	rc_normalize(rc);
+	rc->range >>= 1;
+	if (rc->code >= rc->range) {
+		rc->code -= rc->range;
+		return 1;
+	}
+	return 0;
+}
+
+/* Called twice */
+static inline void INIT
+rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol)
+{
+	int i = num_levels;
+
+	*symbol = 1;
+	while (i--)
+		rc_get_bit(rc, p + *symbol, symbol);
+	*symbol -= 1 << num_levels;
+}
+
+
+/*
+ * Small lzma deflate implementation.
+ * Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
+ *
+ * Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ * Copyright (C) 1999-2005  Igor Pavlov
+ */
+
+
+struct lzma_header {
+	uint8_t pos;
+	uint32_t dict_size;
+	uint64_t dst_size;
+} __attribute__ ((packed)) ;
+
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_NUM_POS_BITS_MAX 4
+
+#define LZMA_LEN_NUM_LOW_BITS 3
+#define LZMA_LEN_NUM_MID_BITS 3
+#define LZMA_LEN_NUM_HIGH_BITS 8
+
+#define LZMA_LEN_CHOICE 0
+#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1)
+#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1)
+#define LZMA_LEN_MID (LZMA_LEN_LOW \
+		      + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS)))
+#define LZMA_LEN_HIGH (LZMA_LEN_MID \
+		       +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS)))
+#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS))
+
+#define LZMA_NUM_STATES 12
+#define LZMA_NUM_LIT_STATES 7
+
+#define LZMA_START_POS_MODEL_INDEX 4
+#define LZMA_END_POS_MODEL_INDEX 14
+#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1))
+
+#define LZMA_NUM_POS_SLOT_BITS 6
+#define LZMA_NUM_LEN_TO_POS_STATES 4
+
+#define LZMA_NUM_ALIGN_BITS 4
+
+#define LZMA_MATCH_MIN_LEN 2
+
+#define LZMA_IS_MATCH 0
+#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
+#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES)
+#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES)
+#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES)
+#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES)
+#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \
+		       + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
+#define LZMA_SPEC_POS (LZMA_POS_SLOT \
+		       +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS))
+#define LZMA_ALIGN (LZMA_SPEC_POS \
+		    + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX)
+#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS))
+#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS)
+#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS)
+
+
+struct writer {
+	uint8_t *buffer;
+	uint8_t previous_byte;
+	size_t buffer_pos;
+	int bufsize;
+	size_t global_pos;
+	int(*flush)(void*, unsigned int);
+	struct lzma_header *header;
+};
+
+struct cstate {
+	int state;
+	uint32_t rep0, rep1, rep2, rep3;
+};
+
+static inline size_t INIT get_pos(struct writer *wr)
+{
+	return
+		wr->global_pos + wr->buffer_pos;
+}
+
+static inline uint8_t INIT peek_old_byte(struct writer *wr,
+						uint32_t offs)
+{
+	if (!wr->flush) {
+		int32_t pos;
+		while (offs > wr->header->dict_size)
+			offs -= wr->header->dict_size;
+		pos = wr->buffer_pos - offs;
+		return wr->buffer[pos];
+	} else {
+		uint32_t pos = wr->buffer_pos - offs;
+		while (pos >= wr->header->dict_size)
+			pos += wr->header->dict_size;
+		return wr->buffer[pos];
+	}
+
+}
+
+static inline void INIT write_byte(struct writer *wr, uint8_t byte)
+{
+	wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte;
+	if (wr->flush && wr->buffer_pos == wr->header->dict_size) {
+		wr->buffer_pos = 0;
+		wr->global_pos += wr->header->dict_size;
+		wr->flush((char *)wr->buffer, wr->header->dict_size);
+	}
+}
+
+
+static inline void INIT copy_byte(struct writer *wr, uint32_t offs)
+{
+	write_byte(wr, peek_old_byte(wr, offs));
+}
+
+static inline void INIT copy_bytes(struct writer *wr,
+					 uint32_t rep0, int len)
+{
+	do {
+		copy_byte(wr, rep0);
+		len--;
+	} while (len != 0 && wr->buffer_pos < wr->header->dst_size);
+}
+
+static inline void INIT process_bit0(struct writer *wr, struct rc *rc,
+				     struct cstate *cst, uint16_t *p,
+				     int pos_state, uint16_t *prob,
+				     int lc, uint32_t literal_pos_mask) {
+	int mi = 1;
+	rc_update_bit_0(rc, prob);
+	prob = (p + LZMA_LITERAL +
+		(LZMA_LIT_SIZE
+		 * (((get_pos(wr) & literal_pos_mask) << lc)
+		    + (wr->previous_byte >> (8 - lc))))
+		);
+
+	if (cst->state >= LZMA_NUM_LIT_STATES) {
+		int match_byte = peek_old_byte(wr, cst->rep0);
+		do {
+			int bit;
+			uint16_t *prob_lit;
+
+			match_byte <<= 1;
+			bit = match_byte & 0x100;
+			prob_lit = prob + 0x100 + bit + mi;
+			if (rc_get_bit(rc, prob_lit, &mi)) {
+				if (!bit)
+					break;
+			} else {
+				if (bit)
+					break;
+			}
+		} while (mi < 0x100);
+	}
+	while (mi < 0x100) {
+		uint16_t *prob_lit = prob + mi;
+		rc_get_bit(rc, prob_lit, &mi);
+	}
+	write_byte(wr, mi);
+	if (cst->state < 4)
+		cst->state = 0;
+	else if (cst->state < 10)
+		cst->state -= 3;
+	else
+		cst->state -= 6;
+}
+
+static inline void INIT process_bit1(struct writer *wr, struct rc *rc,
+					    struct cstate *cst, uint16_t *p,
+					    int pos_state, uint16_t *prob) {
+  int offset;
+	uint16_t *prob_len;
+	int num_bits;
+	int len;
+
+	rc_update_bit_1(rc, prob);
+	prob = p + LZMA_IS_REP + cst->state;
+	if (rc_is_bit_0(rc, prob)) {
+		rc_update_bit_0(rc, prob);
+		cst->rep3 = cst->rep2;
+		cst->rep2 = cst->rep1;
+		cst->rep1 = cst->rep0;
+		cst->state = cst->state < LZMA_NUM_LIT_STATES ? 0 : 3;
+		prob = p + LZMA_LEN_CODER;
+	} else {
+		rc_update_bit_1(rc, prob);
+		prob = p + LZMA_IS_REP_G0 + cst->state;
+		if (rc_is_bit_0(rc, prob)) {
+			rc_update_bit_0(rc, prob);
+			prob = (p + LZMA_IS_REP_0_LONG
+				+ (cst->state <<
+				   LZMA_NUM_POS_BITS_MAX) +
+				pos_state);
+			if (rc_is_bit_0(rc, prob)) {
+				rc_update_bit_0(rc, prob);
+
+				cst->state = cst->state < LZMA_NUM_LIT_STATES ?
+					9 : 11;
+				copy_byte(wr, cst->rep0);
+				return;
+			} else {
+				rc_update_bit_1(rc, prob);
+			}
+		} else {
+			uint32_t distance;
+
+			rc_update_bit_1(rc, prob);
+			prob = p + LZMA_IS_REP_G1 + cst->state;
+			if (rc_is_bit_0(rc, prob)) {
+				rc_update_bit_0(rc, prob);
+				distance = cst->rep1;
+			} else {
+				rc_update_bit_1(rc, prob);
+				prob = p + LZMA_IS_REP_G2 + cst->state;
+				if (rc_is_bit_0(rc, prob)) {
+					rc_update_bit_0(rc, prob);
+					distance = cst->rep2;
+				} else {
+					rc_update_bit_1(rc, prob);
+					distance = cst->rep3;
+					cst->rep3 = cst->rep2;
+				}
+				cst->rep2 = cst->rep1;
+			}
+			cst->rep1 = cst->rep0;
+			cst->rep0 = distance;
+		}
+		cst->state = cst->state < LZMA_NUM_LIT_STATES ? 8 : 11;
+		prob = p + LZMA_REP_LEN_CODER;
+	}
+
+	prob_len = prob + LZMA_LEN_CHOICE;
+	if (rc_is_bit_0(rc, prob_len)) {
+		rc_update_bit_0(rc, prob_len);
+		prob_len = (prob + LZMA_LEN_LOW
+			    + (pos_state <<
+			       LZMA_LEN_NUM_LOW_BITS));
+		offset = 0;
+		num_bits = LZMA_LEN_NUM_LOW_BITS;
+	} else {
+		rc_update_bit_1(rc, prob_len);
+		prob_len = prob + LZMA_LEN_CHOICE_2;
+		if (rc_is_bit_0(rc, prob_len)) {
+			rc_update_bit_0(rc, prob_len);
+			prob_len = (prob + LZMA_LEN_MID
+				    + (pos_state <<
+				       LZMA_LEN_NUM_MID_BITS));
+			offset = 1 << LZMA_LEN_NUM_LOW_BITS;
+			num_bits = LZMA_LEN_NUM_MID_BITS;
+		} else {
+			rc_update_bit_1(rc, prob_len);
+			prob_len = prob + LZMA_LEN_HIGH;
+			offset = ((1 << LZMA_LEN_NUM_LOW_BITS)
+				  + (1 << LZMA_LEN_NUM_MID_BITS));
+			num_bits = LZMA_LEN_NUM_HIGH_BITS;
+		}
+	}
+
+	rc_bit_tree_decode(rc, prob_len, num_bits, &len);
+	len += offset;
+
+	if (cst->state < 4) {
+		int pos_slot;
+
+		cst->state += LZMA_NUM_LIT_STATES;
+		prob =
+			p + LZMA_POS_SLOT +
+			((len <
+			  LZMA_NUM_LEN_TO_POS_STATES ? len :
+			  LZMA_NUM_LEN_TO_POS_STATES - 1)
+			 << LZMA_NUM_POS_SLOT_BITS);
+		rc_bit_tree_decode(rc, prob,
+				   LZMA_NUM_POS_SLOT_BITS,
+				   &pos_slot);
+		if (pos_slot >= LZMA_START_POS_MODEL_INDEX) {
+			int i, mi;
+			num_bits = (pos_slot >> 1) - 1;
+			cst->rep0 = 2 | (pos_slot & 1);
+			if (pos_slot < LZMA_END_POS_MODEL_INDEX) {
+				cst->rep0 <<= num_bits;
+				prob = p + LZMA_SPEC_POS +
+					cst->rep0 - pos_slot - 1;
+			} else {
+				num_bits -= LZMA_NUM_ALIGN_BITS;
+				while (num_bits--)
+					cst->rep0 = (cst->rep0 << 1) |
+						rc_direct_bit(rc);
+				prob = p + LZMA_ALIGN;
+				cst->rep0 <<= LZMA_NUM_ALIGN_BITS;
+				num_bits = LZMA_NUM_ALIGN_BITS;
+			}
+			i = 1;
+			mi = 1;
+			while (num_bits--) {
+				if (rc_get_bit(rc, prob + mi, &mi))
+					cst->rep0 |= i;
+				i <<= 1;
+			}
+		} else
+			cst->rep0 = pos_slot;
+		if (++(cst->rep0) == 0)
+			return;
+	}
+
+	len += LZMA_MATCH_MIN_LEN;
+
+	copy_bytes(wr, cst->rep0, len);
+}
+
+
+
+STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
+			      int(*fill)(void*, unsigned int),
+			      int(*flush)(void*, unsigned int),
+			      unsigned char *output,
+			      int *posp,
+			      void(*error_fn)(char *x)
+	)
+{
+	struct lzma_header header;
+	int lc, pb, lp;
+	uint32_t pos_state_mask;
+	uint32_t literal_pos_mask;
+	uint16_t *p;
+	int num_probs;
+	struct rc rc;
+	int i, mi;
+	struct writer wr;
+	struct cstate cst;
+	unsigned char *inbuf;
+	int ret = -1;
+
+	set_error_fn(error_fn);
+	if (!flush)
+		in_len -= 4; /* Uncompressed size hack active in pre-boot
+				environment */
+	if (buf)
+		inbuf = buf;
+	else
+		inbuf = malloc(LZMA_IOBUF_SIZE);
+	if (!inbuf) {
+		error("Could not allocate input bufer");
+		goto exit_0;
+	}
+
+	cst.state = 0;
+	cst.rep0 = cst.rep1 = cst.rep2 = cst.rep3 = 1;
+
+	wr.header = &header;
+	wr.flush = flush;
+	wr.global_pos = 0;
+	wr.previous_byte = 0;
+	wr.buffer_pos = 0;
+
+	rc_init(&rc, fill, inbuf, in_len);
+
+	for (i = 0; i < sizeof(header); i++) {
+		if (rc.ptr >= rc.buffer_end)
+			rc_read(&rc);
+		((unsigned char *)&header)[i] = *rc.ptr++;
+	}
+
+	if (header.pos >= (9 * 5 * 5))
+		error("bad header");
+
+	mi = 0;
+	lc = header.pos;
+	while (lc >= 9) {
+		mi++;
+		lc -= 9;
+	}
+	pb = 0;
+	lp = mi;
+	while (lp >= 5) {
+		pb++;
+		lp -= 5;
+	}
+	pos_state_mask = (1 << pb) - 1;
+	literal_pos_mask = (1 << lp) - 1;
+
+	ENDIAN_CONVERT(header.dict_size);
+	ENDIAN_CONVERT(header.dst_size);
+
+	if (header.dict_size == 0)
+		header.dict_size = 1;
+
+	if (output)
+		wr.buffer = output;
+	else {
+		wr.bufsize = MIN(header.dst_size, header.dict_size);
+		wr.buffer = large_malloc(wr.bufsize);
+	}
+	if (wr.buffer == NULL)
+		goto exit_1;
+
+	num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp));
+	p = (uint16_t *) large_malloc(num_probs * sizeof(*p));
+	if (p == 0)
+		goto exit_2;
+	num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp));
+	for (i = 0; i < num_probs; i++)
+		p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1;
+
+	rc_init_code(&rc);
+
+	while (get_pos(&wr) < header.dst_size) {
+		int pos_state =	get_pos(&wr) & pos_state_mask;
+		uint16_t *prob = p + LZMA_IS_MATCH +
+			(cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state;
+		if (rc_is_bit_0(&rc, prob))
+			process_bit0(&wr, &rc, &cst, p, pos_state, prob,
+				     lc, literal_pos_mask);
+		else {
+			process_bit1(&wr, &rc, &cst, p, pos_state, prob);
+			if (cst.rep0 == 0)
+				break;
+		}
+	}
+
+	if (posp)
+		*posp = rc.ptr-rc.buffer;
+	if (wr.flush)
+		wr.flush(wr.buffer, wr.buffer_pos);
+	ret = 0;
+	large_free(p);
+exit_2:
+	if (!output)
+		large_free(wr.buffer);
+exit_1:
+	if (!buf)
+		free(inbuf);
+exit_0:
+	return ret;
+}
+
+#define decompress unlzma
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
new file mode 100644
index 0000000..833139c
--- /dev/null
+++ b/lib/dynamic_debug.c
@@ -0,0 +1,769 @@
+/*
+ * lib/dynamic_debug.c
+ *
+ * make pr_debug()/dev_dbg() calls runtime configurable based upon their
+ * source module.
+ *
+ * Copyright (C) 2008 Jason Baron <jbaron@redhat.com>
+ * By Greg Banks <gnb@melbourne.sgi.com>
+ * Copyright (c) 2008 Silicon Graphics Inc.  All Rights Reserved.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kallsyms.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/list.h>
+#include <linux/sysctl.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/dynamic_debug.h>
+#include <linux/debugfs.h>
+
+extern struct _ddebug __start___verbose[];
+extern struct _ddebug __stop___verbose[];
+
+/* dynamic_debug_enabled, and dynamic_debug_enabled2 are bitmasks in which
+ * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
+ * use independent hash functions, to reduce the chance of false positives.
+ */
+long long dynamic_debug_enabled;
+EXPORT_SYMBOL_GPL(dynamic_debug_enabled);
+long long dynamic_debug_enabled2;
+EXPORT_SYMBOL_GPL(dynamic_debug_enabled2);
+
+struct ddebug_table {
+	struct list_head link;
+	char *mod_name;
+	unsigned int num_ddebugs;
+	unsigned int num_enabled;
+	struct _ddebug *ddebugs;
+};
+
+struct ddebug_query {
+	const char *filename;
+	const char *module;
+	const char *function;
+	const char *format;
+	unsigned int first_lineno, last_lineno;
+};
+
+struct ddebug_iter {
+	struct ddebug_table *table;
+	unsigned int idx;
+};
+
+static DEFINE_MUTEX(ddebug_lock);
+static LIST_HEAD(ddebug_tables);
+static int verbose = 0;
+
+/* Return the last part of a pathname */
+static inline const char *basename(const char *path)
+{
+	const char *tail = strrchr(path, '/');
+	return tail ? tail+1 : path;
+}
+
+/* format a string into buf[] which describes the _ddebug's flags */
+static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
+				    size_t maxlen)
+{
+	char *p = buf;
+
+	BUG_ON(maxlen < 4);
+	if (dp->flags & _DPRINTK_FLAGS_PRINT)
+		*p++ = 'p';
+	if (p == buf)
+		*p++ = '-';
+	*p = '\0';
+
+	return buf;
+}
+
+/*
+ * must be called with ddebug_lock held
+ */
+
+static int disabled_hash(char hash, bool first_table)
+{
+	struct ddebug_table *dt;
+	char table_hash_value;
+
+	list_for_each_entry(dt, &ddebug_tables, link) {
+		if (first_table)
+			table_hash_value = dt->ddebugs->primary_hash;
+		else
+			table_hash_value = dt->ddebugs->secondary_hash;
+		if (dt->num_enabled && (hash == table_hash_value))
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Search the tables for _ddebug's which match the given
+ * `query' and apply the `flags' and `mask' to them.  Tells
+ * the user which ddebug's were changed, or whether none
+ * were matched.
+ */
+static void ddebug_change(const struct ddebug_query *query,
+			   unsigned int flags, unsigned int mask)
+{
+	int i;
+	struct ddebug_table *dt;
+	unsigned int newflags;
+	unsigned int nfound = 0;
+	char flagbuf[8];
+
+	/* search for matching ddebugs */
+	mutex_lock(&ddebug_lock);
+	list_for_each_entry(dt, &ddebug_tables, link) {
+
+		/* match against the module name */
+		if (query->module != NULL &&
+		    strcmp(query->module, dt->mod_name))
+			continue;
+
+		for (i = 0 ; i < dt->num_ddebugs ; i++) {
+			struct _ddebug *dp = &dt->ddebugs[i];
+
+			/* match against the source filename */
+			if (query->filename != NULL &&
+			    strcmp(query->filename, dp->filename) &&
+			    strcmp(query->filename, basename(dp->filename)))
+				continue;
+
+			/* match against the function */
+			if (query->function != NULL &&
+			    strcmp(query->function, dp->function))
+				continue;
+
+			/* match against the format */
+			if (query->format != NULL &&
+			    strstr(dp->format, query->format) == NULL)
+				continue;
+
+			/* match against the line number range */
+			if (query->first_lineno &&
+			    dp->lineno < query->first_lineno)
+				continue;
+			if (query->last_lineno &&
+			    dp->lineno > query->last_lineno)
+				continue;
+
+			nfound++;
+
+			newflags = (dp->flags & mask) | flags;
+			if (newflags == dp->flags)
+				continue;
+
+			if (!newflags)
+				dt->num_enabled--;
+			else if (!dp-flags)
+				dt->num_enabled++;
+			dp->flags = newflags;
+			if (newflags) {
+				dynamic_debug_enabled |=
+						(1LL << dp->primary_hash);
+				dynamic_debug_enabled2 |=
+						(1LL << dp->secondary_hash);
+			} else {
+				if (disabled_hash(dp->primary_hash, true))
+					dynamic_debug_enabled &=
+						~(1LL << dp->primary_hash);
+				if (disabled_hash(dp->secondary_hash, false))
+					dynamic_debug_enabled2 &=
+						~(1LL << dp->secondary_hash);
+			}
+			if (verbose)
+				printk(KERN_INFO
+					"ddebug: changed %s:%d [%s]%s %s\n",
+					dp->filename, dp->lineno,
+					dt->mod_name, dp->function,
+					ddebug_describe_flags(dp, flagbuf,
+							sizeof(flagbuf)));
+		}
+	}
+	mutex_unlock(&ddebug_lock);
+
+	if (!nfound && verbose)
+		printk(KERN_INFO "ddebug: no matches for query\n");
+}
+
+/*
+ * Split the buffer `buf' into space-separated words.
+ * Handles simple " and ' quoting, i.e. without nested,
+ * embedded or escaped \".  Return the number of words
+ * or <0 on error.
+ */
+static int ddebug_tokenize(char *buf, char *words[], int maxwords)
+{
+	int nwords = 0;
+
+	while (*buf) {
+		char *end;
+
+		/* Skip leading whitespace */
+		while (*buf && isspace(*buf))
+			buf++;
+		if (!*buf)
+			break;	/* oh, it was trailing whitespace */
+
+		/* Run `end' over a word, either whitespace separated or quoted */
+		if (*buf == '"' || *buf == '\'') {
+			int quote = *buf++;
+			for (end = buf ; *end && *end != quote ; end++)
+				;
+			if (!*end)
+				return -EINVAL;	/* unclosed quote */
+		} else {
+			for (end = buf ; *end && !isspace(*end) ; end++)
+				;
+			BUG_ON(end == buf);
+		}
+		/* Here `buf' is the start of the word, `end' is one past the end */
+
+		if (nwords == maxwords)
+			return -EINVAL;	/* ran out of words[] before bytes */
+		if (*end)
+			*end++ = '\0';	/* terminate the word */
+		words[nwords++] = buf;
+		buf = end;
+	}
+
+	if (verbose) {
+		int i;
+		printk(KERN_INFO "%s: split into words:", __func__);
+		for (i = 0 ; i < nwords ; i++)
+			printk(" \"%s\"", words[i]);
+		printk("\n");
+	}
+
+	return nwords;
+}
+
+/*
+ * Parse a single line number.  Note that the empty string ""
+ * is treated as a special case and converted to zero, which
+ * is later treated as a "don't care" value.
+ */
+static inline int parse_lineno(const char *str, unsigned int *val)
+{
+	char *end = NULL;
+	BUG_ON(str == NULL);
+	if (*str == '\0') {
+		*val = 0;
+		return 0;
+	}
+	*val = simple_strtoul(str, &end, 10);
+	return end == NULL || end == str || *end != '\0' ? -EINVAL : 0;
+}
+
+/*
+ * Undo octal escaping in a string, inplace.  This is useful to
+ * allow the user to express a query which matches a format
+ * containing embedded spaces.
+ */
+#define isodigit(c)		((c) >= '0' && (c) <= '7')
+static char *unescape(char *str)
+{
+	char *in = str;
+	char *out = str;
+
+	while (*in) {
+		if (*in == '\\') {
+			if (in[1] == '\\') {
+				*out++ = '\\';
+				in += 2;
+				continue;
+			} else if (in[1] == 't') {
+				*out++ = '\t';
+				in += 2;
+				continue;
+			} else if (in[1] == 'n') {
+				*out++ = '\n';
+				in += 2;
+				continue;
+			} else if (isodigit(in[1]) &&
+			         isodigit(in[2]) &&
+			         isodigit(in[3])) {
+				*out++ = ((in[1] - '0')<<6) |
+				          ((in[2] - '0')<<3) |
+				          (in[3] - '0');
+				in += 4;
+				continue;
+			}
+		}
+		*out++ = *in++;
+	}
+	*out = '\0';
+
+	return str;
+}
+
+/*
+ * Parse words[] as a ddebug query specification, which is a series
+ * of (keyword, value) pairs chosen from these possibilities:
+ *
+ * func <function-name>
+ * file <full-pathname>
+ * file <base-filename>
+ * module <module-name>
+ * format <escaped-string-to-find-in-format>
+ * line <lineno>
+ * line <first-lineno>-<last-lineno> // where either may be empty
+ */
+static int ddebug_parse_query(char *words[], int nwords,
+			       struct ddebug_query *query)
+{
+	unsigned int i;
+
+	/* check we have an even number of words */
+	if (nwords % 2 != 0)
+		return -EINVAL;
+	memset(query, 0, sizeof(*query));
+
+	for (i = 0 ; i < nwords ; i += 2) {
+		if (!strcmp(words[i], "func"))
+			query->function = words[i+1];
+		else if (!strcmp(words[i], "file"))
+			query->filename = words[i+1];
+		else if (!strcmp(words[i], "module"))
+			query->module = words[i+1];
+		else if (!strcmp(words[i], "format"))
+			query->format = unescape(words[i+1]);
+		else if (!strcmp(words[i], "line")) {
+			char *first = words[i+1];
+			char *last = strchr(first, '-');
+			if (last)
+				*last++ = '\0';
+			if (parse_lineno(first, &query->first_lineno) < 0)
+				return -EINVAL;
+			if (last != NULL) {
+				/* range <first>-<last> */
+				if (parse_lineno(last, &query->last_lineno) < 0)
+					return -EINVAL;
+			} else {
+				query->last_lineno = query->first_lineno;
+			}
+		} else {
+			if (verbose)
+				printk(KERN_ERR "%s: unknown keyword \"%s\"\n",
+					__func__, words[i]);
+			return -EINVAL;
+		}
+	}
+
+	if (verbose)
+		printk(KERN_INFO "%s: q->function=\"%s\" q->filename=\"%s\" "
+		       "q->module=\"%s\" q->format=\"%s\" q->lineno=%u-%u\n",
+			__func__, query->function, query->filename,
+			query->module, query->format, query->first_lineno,
+			query->last_lineno);
+
+	return 0;
+}
+
+/*
+ * Parse `str' as a flags specification, format [-+=][p]+.
+ * Sets up *maskp and *flagsp to be used when changing the
+ * flags fields of matched _ddebug's.  Returns 0 on success
+ * or <0 on error.
+ */
+static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
+			       unsigned int *maskp)
+{
+	unsigned flags = 0;
+	int op = '=';
+
+	switch (*str) {
+	case '+':
+	case '-':
+	case '=':
+		op = *str++;
+		break;
+	default:
+		return -EINVAL;
+	}
+	if (verbose)
+		printk(KERN_INFO "%s: op='%c'\n", __func__, op);
+
+	for ( ; *str ; ++str) {
+		switch (*str) {
+		case 'p':
+			flags |= _DPRINTK_FLAGS_PRINT;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+	if (flags == 0)
+		return -EINVAL;
+	if (verbose)
+		printk(KERN_INFO "%s: flags=0x%x\n", __func__, flags);
+
+	/* calculate final *flagsp, *maskp according to mask and op */
+	switch (op) {
+	case '=':
+		*maskp = 0;
+		*flagsp = flags;
+		break;
+	case '+':
+		*maskp = ~0U;
+		*flagsp = flags;
+		break;
+	case '-':
+		*maskp = ~flags;
+		*flagsp = 0;
+		break;
+	}
+	if (verbose)
+		printk(KERN_INFO "%s: *flagsp=0x%x *maskp=0x%x\n",
+			__func__, *flagsp, *maskp);
+	return 0;
+}
+
+/*
+ * File_ops->write method for <debugfs>/dynamic_debug/conrol.  Gathers the
+ * command text from userspace, parses and executes it.
+ */
+static ssize_t ddebug_proc_write(struct file *file, const char __user *ubuf,
+				  size_t len, loff_t *offp)
+{
+	unsigned int flags = 0, mask = 0;
+	struct ddebug_query query;
+#define MAXWORDS 9
+	int nwords;
+	char *words[MAXWORDS];
+	char tmpbuf[256];
+
+	if (len == 0)
+		return 0;
+	/* we don't check *offp -- multiple writes() are allowed */
+	if (len > sizeof(tmpbuf)-1)
+		return -E2BIG;
+	if (copy_from_user(tmpbuf, ubuf, len))
+		return -EFAULT;
+	tmpbuf[len] = '\0';
+	if (verbose)
+		printk(KERN_INFO "%s: read %d bytes from userspace\n",
+			__func__, (int)len);
+
+	nwords = ddebug_tokenize(tmpbuf, words, MAXWORDS);
+	if (nwords < 0)
+		return -EINVAL;
+	if (ddebug_parse_query(words, nwords-1, &query))
+		return -EINVAL;
+	if (ddebug_parse_flags(words[nwords-1], &flags, &mask))
+		return -EINVAL;
+
+	/* actually go and implement the change */
+	ddebug_change(&query, flags, mask);
+
+	*offp += len;
+	return len;
+}
+
+/*
+ * Set the iterator to point to the first _ddebug object
+ * and return a pointer to that first object.  Returns
+ * NULL if there are no _ddebugs at all.
+ */
+static struct _ddebug *ddebug_iter_first(struct ddebug_iter *iter)
+{
+	if (list_empty(&ddebug_tables)) {
+		iter->table = NULL;
+		iter->idx = 0;
+		return NULL;
+	}
+	iter->table = list_entry(ddebug_tables.next,
+				 struct ddebug_table, link);
+	iter->idx = 0;
+	return &iter->table->ddebugs[iter->idx];
+}
+
+/*
+ * Advance the iterator to point to the next _ddebug
+ * object from the one the iterator currently points at,
+ * and returns a pointer to the new _ddebug.  Returns
+ * NULL if the iterator has seen all the _ddebugs.
+ */
+static struct _ddebug *ddebug_iter_next(struct ddebug_iter *iter)
+{
+	if (iter->table == NULL)
+		return NULL;
+	if (++iter->idx == iter->table->num_ddebugs) {
+		/* iterate to next table */
+		iter->idx = 0;
+		if (list_is_last(&iter->table->link, &ddebug_tables)) {
+			iter->table = NULL;
+			return NULL;
+		}
+		iter->table = list_entry(iter->table->link.next,
+					 struct ddebug_table, link);
+	}
+	return &iter->table->ddebugs[iter->idx];
+}
+
+/*
+ * Seq_ops start method.  Called at the start of every
+ * read() call from userspace.  Takes the ddebug_lock and
+ * seeks the seq_file's iterator to the given position.
+ */
+static void *ddebug_proc_start(struct seq_file *m, loff_t *pos)
+{
+	struct ddebug_iter *iter = m->private;
+	struct _ddebug *dp;
+	int n = *pos;
+
+	if (verbose)
+		printk(KERN_INFO "%s: called m=%p *pos=%lld\n",
+			__func__, m, (unsigned long long)*pos);
+
+	mutex_lock(&ddebug_lock);
+
+	if (!n)
+		return SEQ_START_TOKEN;
+	if (n < 0)
+		return NULL;
+	dp = ddebug_iter_first(iter);
+	while (dp != NULL && --n > 0)
+		dp = ddebug_iter_next(iter);
+	return dp;
+}
+
+/*
+ * Seq_ops next method.  Called several times within a read()
+ * call from userspace, with ddebug_lock held.  Walks to the
+ * next _ddebug object with a special case for the header line.
+ */
+static void *ddebug_proc_next(struct seq_file *m, void *p, loff_t *pos)
+{
+	struct ddebug_iter *iter = m->private;
+	struct _ddebug *dp;
+
+	if (verbose)
+		printk(KERN_INFO "%s: called m=%p p=%p *pos=%lld\n",
+			__func__, m, p, (unsigned long long)*pos);
+
+	if (p == SEQ_START_TOKEN)
+		dp = ddebug_iter_first(iter);
+	else
+		dp = ddebug_iter_next(iter);
+	++*pos;
+	return dp;
+}
+
+/*
+ * Seq_ops show method.  Called several times within a read()
+ * call from userspace, with ddebug_lock held.  Formats the
+ * current _ddebug as a single human-readable line, with a
+ * special case for the header line.
+ */
+static int ddebug_proc_show(struct seq_file *m, void *p)
+{
+	struct ddebug_iter *iter = m->private;
+	struct _ddebug *dp = p;
+	char flagsbuf[8];
+
+	if (verbose)
+		printk(KERN_INFO "%s: called m=%p p=%p\n",
+			__func__, m, p);
+
+	if (p == SEQ_START_TOKEN) {
+		seq_puts(m,
+			"# filename:lineno [module]function flags format\n");
+		return 0;
+	}
+
+	seq_printf(m, "%s:%u [%s]%s %s \"",
+		   dp->filename, dp->lineno,
+		   iter->table->mod_name, dp->function,
+		   ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+	seq_escape(m, dp->format, "\t\r\n\"");
+	seq_puts(m, "\"\n");
+
+	return 0;
+}
+
+/*
+ * Seq_ops stop method.  Called at the end of each read()
+ * call from userspace.  Drops ddebug_lock.
+ */
+static void ddebug_proc_stop(struct seq_file *m, void *p)
+{
+	if (verbose)
+		printk(KERN_INFO "%s: called m=%p p=%p\n",
+			__func__, m, p);
+	mutex_unlock(&ddebug_lock);
+}
+
+static const struct seq_operations ddebug_proc_seqops = {
+	.start = ddebug_proc_start,
+	.next = ddebug_proc_next,
+	.show = ddebug_proc_show,
+	.stop = ddebug_proc_stop
+};
+
+/*
+ * File_ops->open method for <debugfs>/dynamic_debug/control.  Does the seq_file
+ * setup dance, and also creates an iterator to walk the _ddebugs.
+ * Note that we create a seq_file always, even for O_WRONLY files
+ * where it's not needed, as doing so simplifies the ->release method.
+ */
+static int ddebug_proc_open(struct inode *inode, struct file *file)
+{
+	struct ddebug_iter *iter;
+	int err;
+
+	if (verbose)
+		printk(KERN_INFO "%s: called\n", __func__);
+
+	iter = kzalloc(sizeof(*iter), GFP_KERNEL);
+	if (iter == NULL)
+		return -ENOMEM;
+
+	err = seq_open(file, &ddebug_proc_seqops);
+	if (err) {
+		kfree(iter);
+		return err;
+	}
+	((struct seq_file *) file->private_data)->private = iter;
+	return 0;
+}
+
+static const struct file_operations ddebug_proc_fops = {
+	.owner = THIS_MODULE,
+	.open = ddebug_proc_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = seq_release_private,
+	.write = ddebug_proc_write
+};
+
+/*
+ * Allocate a new ddebug_table for the given module
+ * and add it to the global list.
+ */
+int ddebug_add_module(struct _ddebug *tab, unsigned int n,
+			     const char *name)
+{
+	struct ddebug_table *dt;
+	char *new_name;
+
+	dt = kzalloc(sizeof(*dt), GFP_KERNEL);
+	if (dt == NULL)
+		return -ENOMEM;
+	new_name = kstrdup(name, GFP_KERNEL);
+	if (new_name == NULL) {
+		kfree(dt);
+		return -ENOMEM;
+	}
+	dt->mod_name = new_name;
+	dt->num_ddebugs = n;
+	dt->num_enabled = 0;
+	dt->ddebugs = tab;
+
+	mutex_lock(&ddebug_lock);
+	list_add_tail(&dt->link, &ddebug_tables);
+	mutex_unlock(&ddebug_lock);
+
+	if (verbose)
+		printk(KERN_INFO "%u debug prints in module %s\n",
+				 n, dt->mod_name);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ddebug_add_module);
+
+static void ddebug_table_free(struct ddebug_table *dt)
+{
+	list_del_init(&dt->link);
+	kfree(dt->mod_name);
+	kfree(dt);
+}
+
+/*
+ * Called in response to a module being unloaded.  Removes
+ * any ddebug_table's which point at the module.
+ */
+int ddebug_remove_module(char *mod_name)
+{
+	struct ddebug_table *dt, *nextdt;
+	int ret = -ENOENT;
+
+	if (verbose)
+		printk(KERN_INFO "%s: removing module \"%s\"\n",
+				__func__, mod_name);
+
+	mutex_lock(&ddebug_lock);
+	list_for_each_entry_safe(dt, nextdt, &ddebug_tables, link) {
+		if (!strcmp(dt->mod_name, mod_name)) {
+			ddebug_table_free(dt);
+			ret = 0;
+		}
+	}
+	mutex_unlock(&ddebug_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ddebug_remove_module);
+
+static void ddebug_remove_all_tables(void)
+{
+	mutex_lock(&ddebug_lock);
+	while (!list_empty(&ddebug_tables)) {
+		struct ddebug_table *dt = list_entry(ddebug_tables.next,
+						      struct ddebug_table,
+						      link);
+		ddebug_table_free(dt);
+	}
+	mutex_unlock(&ddebug_lock);
+}
+
+static int __init dynamic_debug_init(void)
+{
+	struct dentry *dir, *file;
+	struct _ddebug *iter, *iter_start;
+	const char *modname = NULL;
+	int ret = 0;
+	int n = 0;
+
+	dir = debugfs_create_dir("dynamic_debug", NULL);
+	if (!dir)
+		return -ENOMEM;
+	file = debugfs_create_file("control", 0644, dir, NULL,
+					&ddebug_proc_fops);
+	if (!file) {
+		debugfs_remove(dir);
+		return -ENOMEM;
+	}
+	if (__start___verbose != __stop___verbose) {
+		iter = __start___verbose;
+		modname = iter->modname;
+		iter_start = iter;
+		for (; iter < __stop___verbose; iter++) {
+			if (strcmp(modname, iter->modname)) {
+				ret = ddebug_add_module(iter_start, n, modname);
+				if (ret)
+					goto out_free;
+				n = 0;
+				modname = iter->modname;
+				iter_start = iter;
+			}
+			n++;
+		}
+		ret = ddebug_add_module(iter_start, n, modname);
+	}
+out_free:
+	if (ret) {
+		ddebug_remove_all_tables();
+		debugfs_remove(dir);
+		debugfs_remove(file);
+	}
+	return 0;
+}
+module_init(dynamic_debug_init);
diff --git a/lib/dynamic_printk.c b/lib/dynamic_printk.c
deleted file mode 100644
index 165a197..0000000
--- a/lib/dynamic_printk.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * lib/dynamic_printk.c
- *
- * make pr_debug()/dev_dbg() calls runtime configurable based upon their
- * their source module.
- *
- * Copyright (C) 2008 Red Hat, Inc., Jason Baron <jbaron@redhat.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-#include <linux/seq_file.h>
-#include <linux/debugfs.h>
-#include <linux/fs.h>
-
-extern struct mod_debug __start___verbose[];
-extern struct mod_debug __stop___verbose[];
-
-struct debug_name {
-	struct hlist_node hlist;
-	struct hlist_node hlist2;
-	int hash1;
-	int hash2;
-	char *name;
-	int enable;
-	int type;
-};
-
-static int nr_entries;
-static int num_enabled;
-int dynamic_enabled = DYNAMIC_ENABLED_NONE;
-static struct hlist_head module_table[DEBUG_HASH_TABLE_SIZE] =
-	{ [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT };
-static struct hlist_head module_table2[DEBUG_HASH_TABLE_SIZE] =
-	{ [0 ... DEBUG_HASH_TABLE_SIZE-1] = HLIST_HEAD_INIT };
-static DECLARE_MUTEX(debug_list_mutex);
-
-/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which
- * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They
- * use independent hash functions, to reduce the chance of false positives.
- */
-long long dynamic_printk_enabled;
-EXPORT_SYMBOL_GPL(dynamic_printk_enabled);
-long long dynamic_printk_enabled2;
-EXPORT_SYMBOL_GPL(dynamic_printk_enabled2);
-
-/* returns the debug module pointer. */
-static struct debug_name *find_debug_module(char *module_name)
-{
-	int i;
-	struct hlist_head *head;
-	struct hlist_node *node;
-	struct debug_name *element;
-
-	element = NULL;
-	for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) {
-		head = &module_table[i];
-		hlist_for_each_entry_rcu(element, node, head, hlist)
-			if (!strcmp(element->name, module_name))
-				return element;
-	}
-	return NULL;
-}
-
-/* returns the debug module pointer. */
-static struct debug_name *find_debug_module_hash(char *module_name, int hash)
-{
-	struct hlist_head *head;
-	struct hlist_node *node;
-	struct debug_name *element;
-
-	element = NULL;
-	head = &module_table[hash];
-	hlist_for_each_entry_rcu(element, node, head, hlist)
-		if (!strcmp(element->name, module_name))
-			return element;
-	return NULL;
-}
-
-/* caller must hold mutex*/
-static int __add_debug_module(char *mod_name, int hash, int hash2)
-{
-	struct debug_name *new;
-	char *module_name;
-	int ret = 0;
-
-	if (find_debug_module(mod_name)) {
-		ret = -EINVAL;
-		goto out;
-	}
-	module_name = kmalloc(strlen(mod_name) + 1, GFP_KERNEL);
-	if (!module_name) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	module_name = strcpy(module_name, mod_name);
-	module_name[strlen(mod_name)] = '\0';
-	new = kzalloc(sizeof(struct debug_name), GFP_KERNEL);
-	if (!new) {
-		kfree(module_name);
-		ret = -ENOMEM;
-		goto out;
-	}
-	INIT_HLIST_NODE(&new->hlist);
-	INIT_HLIST_NODE(&new->hlist2);
-	new->name = module_name;
-	new->hash1 = hash;
-	new->hash2 = hash2;
-	hlist_add_head_rcu(&new->hlist, &module_table[hash]);
-	hlist_add_head_rcu(&new->hlist2, &module_table2[hash2]);
-	nr_entries++;
-out:
-	return ret;
-}
-
-int unregister_dynamic_debug_module(char *mod_name)
-{
-	struct debug_name *element;
-	int ret = 0;
-
-	down(&debug_list_mutex);
-	element = find_debug_module(mod_name);
-	if (!element) {
-		ret = -EINVAL;
-		goto out;
-	}
-	hlist_del_rcu(&element->hlist);
-	hlist_del_rcu(&element->hlist2);
-	synchronize_rcu();
-	kfree(element->name);
-	if (element->enable)
-		num_enabled--;
-	kfree(element);
-	nr_entries--;
-out:
-	up(&debug_list_mutex);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
-
-int register_dynamic_debug_module(char *mod_name, int type, char *share_name,
-					char *flags, int hash, int hash2)
-{
-	struct debug_name *elem;
-	int ret = 0;
-
-	down(&debug_list_mutex);
-	elem = find_debug_module(mod_name);
-	if (!elem) {
-		if (__add_debug_module(mod_name, hash, hash2))
-			goto out;
-		elem = find_debug_module(mod_name);
-		if (dynamic_enabled == DYNAMIC_ENABLED_ALL &&
-				!strcmp(mod_name, share_name)) {
-			elem->enable = true;
-			num_enabled++;
-		}
-	}
-	elem->type |= type;
-out:
-	up(&debug_list_mutex);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(register_dynamic_debug_module);
-
-int __dynamic_dbg_enabled_helper(char *mod_name, int type, int value, int hash)
-{
-	struct debug_name *elem;
-	int ret = 0;
-
-	if (dynamic_enabled == DYNAMIC_ENABLED_ALL)
-		return 1;
-	rcu_read_lock();
-	elem = find_debug_module_hash(mod_name, hash);
-	if (elem && elem->enable)
-		ret = 1;
-	rcu_read_unlock();
-	return ret;
-}
-EXPORT_SYMBOL_GPL(__dynamic_dbg_enabled_helper);
-
-static void set_all(bool enable)
-{
-	struct debug_name *e;
-	struct hlist_node *node;
-	int i;
-	long long enable_mask;
-
-	for (i = 0; i < DEBUG_HASH_TABLE_SIZE; i++) {
-		if (module_table[i].first != NULL) {
-			hlist_for_each_entry(e, node, &module_table[i], hlist) {
-				e->enable = enable;
-			}
-		}
-	}
-	if (enable)
-		enable_mask = ULLONG_MAX;
-	else
-		enable_mask = 0;
-	dynamic_printk_enabled = enable_mask;
-	dynamic_printk_enabled2 = enable_mask;
-}
-
-static int disabled_hash(int i, bool first_table)
-{
-	struct debug_name *e;
-	struct hlist_node *node;
-
-	if (first_table) {
-		hlist_for_each_entry(e, node, &module_table[i], hlist) {
-			if (e->enable)
-				return 0;
-		}
-	} else {
-		hlist_for_each_entry(e, node, &module_table2[i], hlist2) {
-			if (e->enable)
-				return 0;
-		}
-	}
-	return 1;
-}
-
-static ssize_t pr_debug_write(struct file *file, const char __user *buf,
-				size_t length, loff_t *ppos)
-{
-	char *buffer, *s, *value_str, *setting_str;
-	int err, value;
-	struct debug_name *elem = NULL;
-	int all = 0;
-
-	if (length > PAGE_SIZE || length < 0)
-		return -EINVAL;
-
-	buffer = (char *)__get_free_page(GFP_KERNEL);
-	if (!buffer)
-		return -ENOMEM;
-
-	err = -EFAULT;
-	if (copy_from_user(buffer, buf, length))
-		goto out;
-
-	err = -EINVAL;
-	if (length < PAGE_SIZE)
-		buffer[length] = '\0';
-	else if (buffer[PAGE_SIZE-1])
-		goto out;
-
-	err = -EINVAL;
-	down(&debug_list_mutex);
-
-	if (strncmp("set", buffer, 3))
-		goto out_up;
-	s = buffer + 3;
-	setting_str = strsep(&s, "=");
-	if (s == NULL)
-		goto out_up;
-	setting_str = strstrip(setting_str);
-	value_str = strsep(&s, " ");
-	if (s == NULL)
-		goto out_up;
-	s = strstrip(s);
-	if (!strncmp(s, "all", 3))
-		all = 1;
-	else
-		elem = find_debug_module(s);
-	if (!strncmp(setting_str, "enable", 6)) {
-		value = !!simple_strtol(value_str, NULL, 10);
-		if (all) {
-			if (value) {
-				set_all(true);
-				num_enabled = nr_entries;
-				dynamic_enabled = DYNAMIC_ENABLED_ALL;
-			} else {
-				set_all(false);
-				num_enabled = 0;
-				dynamic_enabled = DYNAMIC_ENABLED_NONE;
-			}
-			err = 0;
-		} else if (elem) {
-			if (value && (elem->enable == 0)) {
-				dynamic_printk_enabled |= (1LL << elem->hash1);
-				dynamic_printk_enabled2 |= (1LL << elem->hash2);
-				elem->enable = 1;
-				num_enabled++;
-				dynamic_enabled = DYNAMIC_ENABLED_SOME;
-				err = 0;
-				printk(KERN_DEBUG
-					"debugging enabled for module %s\n",
-					elem->name);
-			} else if (!value && (elem->enable == 1)) {
-				elem->enable = 0;
-				num_enabled--;
-				if (disabled_hash(elem->hash1, true))
-					dynamic_printk_enabled &=
-							~(1LL << elem->hash1);
-				if (disabled_hash(elem->hash2, false))
-					dynamic_printk_enabled2 &=
-							~(1LL << elem->hash2);
-				if (num_enabled)
-					dynamic_enabled = DYNAMIC_ENABLED_SOME;
-				else
-					dynamic_enabled = DYNAMIC_ENABLED_NONE;
-				err = 0;
-				printk(KERN_DEBUG
-					"debugging disabled for module %s\n",
-					elem->name);
-			}
-		}
-	}
-	if (!err)
-		err = length;
-out_up:
-	up(&debug_list_mutex);
-out:
-	free_page((unsigned long)buffer);
-	return err;
-}
-
-static void *pr_debug_seq_start(struct seq_file *f, loff_t *pos)
-{
-	return (*pos < DEBUG_HASH_TABLE_SIZE) ? pos : NULL;
-}
-
-static void *pr_debug_seq_next(struct seq_file *s, void *v, loff_t *pos)
-{
-	(*pos)++;
-	if (*pos >= DEBUG_HASH_TABLE_SIZE)
-		return NULL;
-	return pos;
-}
-
-static void pr_debug_seq_stop(struct seq_file *s, void *v)
-{
-	/* Nothing to do */
-}
-
-static int pr_debug_seq_show(struct seq_file *s, void *v)
-{
-	struct hlist_head *head;
-	struct hlist_node *node;
-	struct debug_name *elem;
-	unsigned int i = *(loff_t *) v;
-
-	rcu_read_lock();
-	head = &module_table[i];
-	hlist_for_each_entry_rcu(elem, node, head, hlist) {
-		seq_printf(s, "%s enabled=%d", elem->name, elem->enable);
-		seq_printf(s, "\n");
-	}
-	rcu_read_unlock();
-	return 0;
-}
-
-static struct seq_operations pr_debug_seq_ops = {
-	.start = pr_debug_seq_start,
-	.next  = pr_debug_seq_next,
-	.stop  = pr_debug_seq_stop,
-	.show  = pr_debug_seq_show
-};
-
-static int pr_debug_open(struct inode *inode, struct file *filp)
-{
-	return seq_open(filp, &pr_debug_seq_ops);
-}
-
-static const struct file_operations pr_debug_operations = {
-	.open		= pr_debug_open,
-	.read		= seq_read,
-	.write		= pr_debug_write,
-	.llseek		= seq_lseek,
-	.release	= seq_release,
-};
-
-static int __init dynamic_printk_init(void)
-{
-	struct dentry *dir, *file;
-	struct mod_debug *iter;
-	unsigned long value;
-
-	dir = debugfs_create_dir("dynamic_printk", NULL);
-	if (!dir)
-		return -ENOMEM;
-	file = debugfs_create_file("modules", 0644, dir, NULL,
-					&pr_debug_operations);
-	if (!file) {
-		debugfs_remove(dir);
-		return -ENOMEM;
-	}
-	for (value = (unsigned long)__start___verbose;
-		value < (unsigned long)__stop___verbose;
-		value += sizeof(struct mod_debug)) {
-			iter = (struct mod_debug *)value;
-			register_dynamic_debug_module(iter->modname,
-				iter->type,
-				iter->logical_modname,
-				iter->flag_names, iter->hash, iter->hash2);
-	}
-	if (dynamic_enabled == DYNAMIC_ENABLED_ALL)
-		set_all(true);
-	return 0;
-}
-module_init(dynamic_printk_init);
-/* may want to move this earlier so we can get traces as early as possible */
-
-static int __init dynamic_printk_setup(char *str)
-{
-	if (str)
-		return -ENOENT;
-	dynamic_enabled = DYNAMIC_ENABLED_ALL;
-	return 0;
-}
-/* Use early_param(), so we can get debug output as early as possible */
-early_param("dynamic_printk", dynamic_printk_setup);
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index 01a3c22..39f1029 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -39,7 +39,7 @@ static  __cacheline_aligned_in_smp DEFINE_SPINLOCK(kernel_flag);
 int __lockfunc __reacquire_kernel_lock(void)
 {
 	while (!_raw_spin_trylock(&kernel_flag)) {
-		if (test_thread_flag(TIF_NEED_RESCHED))
+		if (need_resched())
 			return -EAGAIN;
 		cpu_relax();
 	}
diff --git a/lib/kobject.c b/lib/kobject.c
index 0487d1f..a6dec32 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -212,7 +212,7 @@ static int kobject_add_internal(struct kobject *kobj)
  * @fmt: format string used to build the name
  * @vargs: vargs to format the string.
  */
-static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
+int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
 				  va_list vargs)
 {
 	const char *old_name = kobj->name;
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 318328dd..97a777a 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -118,6 +118,13 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 	kset = top_kobj->kset;
 	uevent_ops = kset->uevent_ops;
 
+	/* skip the event, if uevent_suppress is set*/
+	if (kobj->uevent_suppress) {
+		pr_debug("kobject: '%s' (%p): %s: uevent_suppress "
+				 "caused the event to drop!\n",
+				 kobject_name(kobj), kobj, __func__);
+		return 0;
+	}
 	/* skip the event, if the filter returns zero. */
 	if (uevent_ops && uevent_ops->filter)
 		if (!uevent_ops->filter(kset, kobj)) {
@@ -227,6 +234,9 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 			NETLINK_CB(skb).dst_group = 1;
 			retval = netlink_broadcast(uevent_sock, skb, 0, 1,
 						   GFP_KERNEL);
+			/* ENOBUFS should be handled in userspace */
+			if (retval == -ENOBUFS)
+				retval = 0;
 		} else
 			retval = -ENOMEM;
 	}
@@ -248,7 +258,7 @@ int kobject_uevent_env(struct kobject *kobj, enum kobject_action action,
 			goto exit;
 
 		retval = call_usermodehelper(argv[0], argv,
-					     env->envp, UMH_WAIT_EXEC);
+					     env->envp, UMH_NO_WAIT);
 	}
 
 exit:
diff --git a/lib/nlattr.c b/lib/nlattr.c
new file mode 100644
index 0000000..c4706eb
--- /dev/null
+++ b/lib/nlattr.c
@@ -0,0 +1,502 @@
+/*
+ * NETLINK      Netlink attributes
+ *
+ * 		Authors:	Thomas Graf <tgraf@suug.ch>
+ * 				Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <net/netlink.h>
+
+static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = {
+	[NLA_U8]	= sizeof(u8),
+	[NLA_U16]	= sizeof(u16),
+	[NLA_U32]	= sizeof(u32),
+	[NLA_U64]	= sizeof(u64),
+	[NLA_NESTED]	= NLA_HDRLEN,
+};
+
+static int validate_nla(struct nlattr *nla, int maxtype,
+			const struct nla_policy *policy)
+{
+	const struct nla_policy *pt;
+	int minlen = 0, attrlen = nla_len(nla), type = nla_type(nla);
+
+	if (type <= 0 || type > maxtype)
+		return 0;
+
+	pt = &policy[type];
+
+	BUG_ON(pt->type > NLA_TYPE_MAX);
+
+	switch (pt->type) {
+	case NLA_FLAG:
+		if (attrlen > 0)
+			return -ERANGE;
+		break;
+
+	case NLA_NUL_STRING:
+		if (pt->len)
+			minlen = min_t(int, attrlen, pt->len + 1);
+		else
+			minlen = attrlen;
+
+		if (!minlen || memchr(nla_data(nla), '\0', minlen) == NULL)
+			return -EINVAL;
+		/* fall through */
+
+	case NLA_STRING:
+		if (attrlen < 1)
+			return -ERANGE;
+
+		if (pt->len) {
+			char *buf = nla_data(nla);
+
+			if (buf[attrlen - 1] == '\0')
+				attrlen--;
+
+			if (attrlen > pt->len)
+				return -ERANGE;
+		}
+		break;
+
+	case NLA_BINARY:
+		if (pt->len && attrlen > pt->len)
+			return -ERANGE;
+		break;
+
+	case NLA_NESTED_COMPAT:
+		if (attrlen < pt->len)
+			return -ERANGE;
+		if (attrlen < NLA_ALIGN(pt->len))
+			break;
+		if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN)
+			return -ERANGE;
+		nla = nla_data(nla) + NLA_ALIGN(pt->len);
+		if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN + nla_len(nla))
+			return -ERANGE;
+		break;
+	case NLA_NESTED:
+		/* a nested attributes is allowed to be empty; if its not,
+		 * it must have a size of at least NLA_HDRLEN.
+		 */
+		if (attrlen == 0)
+			break;
+	default:
+		if (pt->len)
+			minlen = pt->len;
+		else if (pt->type != NLA_UNSPEC)
+			minlen = nla_attr_minlen[pt->type];
+
+		if (attrlen < minlen)
+			return -ERANGE;
+	}
+
+	return 0;
+}
+
+/**
+ * nla_validate - Validate a stream of attributes
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @maxtype: maximum attribute type to be expected
+ * @policy: validation policy
+ *
+ * Validates all attributes in the specified attribute stream against the
+ * specified policy. Attributes with a type exceeding maxtype will be
+ * ignored. See documenation of struct nla_policy for more details.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int nla_validate(struct nlattr *head, int len, int maxtype,
+		 const struct nla_policy *policy)
+{
+	struct nlattr *nla;
+	int rem, err;
+
+	nla_for_each_attr(nla, head, len, rem) {
+		err = validate_nla(nla, maxtype, policy);
+		if (err < 0)
+			goto errout;
+	}
+
+	err = 0;
+errout:
+	return err;
+}
+
+/**
+ * nla_policy_len - Determin the max. length of a policy
+ * @policy: policy to use
+ * @n: number of policies
+ *
+ * Determines the max. length of the policy.  It is currently used
+ * to allocated Netlink buffers roughly the size of the actual
+ * message.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int
+nla_policy_len(const struct nla_policy *p, int n)
+{
+	int i, len = 0;
+
+	for (i = 0; i < n; i++) {
+		if (p->len)
+			len += nla_total_size(p->len);
+		else if (nla_attr_minlen[p->type])
+			len += nla_total_size(nla_attr_minlen[p->type]);
+	}
+
+	return len;
+}
+
+/**
+ * nla_parse - Parse a stream of attributes into a tb buffer
+ * @tb: destination array with maxtype+1 elements
+ * @maxtype: maximum attribute type to be expected
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @policy: validation policy
+ *
+ * Parses a stream of attributes and stores a pointer to each attribute in
+ * the tb array accessable via the attribute type. Attributes with a type
+ * exceeding maxtype will be silently ignored for backwards compatibility
+ * reasons. policy may be set to NULL if no validation is required.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len,
+	      const struct nla_policy *policy)
+{
+	struct nlattr *nla;
+	int rem, err;
+
+	memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
+
+	nla_for_each_attr(nla, head, len, rem) {
+		u16 type = nla_type(nla);
+
+		if (type > 0 && type <= maxtype) {
+			if (policy) {
+				err = validate_nla(nla, maxtype, policy);
+				if (err < 0)
+					goto errout;
+			}
+
+			tb[type] = nla;
+		}
+	}
+
+	if (unlikely(rem > 0))
+		printk(KERN_WARNING "netlink: %d bytes leftover after parsing "
+		       "attributes.\n", rem);
+
+	err = 0;
+errout:
+	return err;
+}
+
+/**
+ * nla_find - Find a specific attribute in a stream of attributes
+ * @head: head of attribute stream
+ * @len: length of attribute stream
+ * @attrtype: type of attribute to look for
+ *
+ * Returns the first attribute in the stream matching the specified type.
+ */
+struct nlattr *nla_find(struct nlattr *head, int len, int attrtype)
+{
+	struct nlattr *nla;
+	int rem;
+
+	nla_for_each_attr(nla, head, len, rem)
+		if (nla_type(nla) == attrtype)
+			return nla;
+
+	return NULL;
+}
+
+/**
+ * nla_strlcpy - Copy string attribute payload into a sized buffer
+ * @dst: where to copy the string to
+ * @nla: attribute to copy the string from
+ * @dstsize: size of destination buffer
+ *
+ * Copies at most dstsize - 1 bytes into the destination buffer.
+ * The result is always a valid NUL-terminated string. Unlike
+ * strlcpy the destination buffer is always padded out.
+ *
+ * Returns the length of the source buffer.
+ */
+size_t nla_strlcpy(char *dst, const struct nlattr *nla, size_t dstsize)
+{
+	size_t srclen = nla_len(nla);
+	char *src = nla_data(nla);
+
+	if (srclen > 0 && src[srclen - 1] == '\0')
+		srclen--;
+
+	if (dstsize > 0) {
+		size_t len = (srclen >= dstsize) ? dstsize - 1 : srclen;
+
+		memset(dst, 0, dstsize);
+		memcpy(dst, src, len);
+	}
+
+	return srclen;
+}
+
+/**
+ * nla_memcpy - Copy a netlink attribute into another memory area
+ * @dest: where to copy to memcpy
+ * @src: netlink attribute to copy from
+ * @count: size of the destination area
+ *
+ * Note: The number of bytes copied is limited by the length of
+ *       attribute's payload. memcpy
+ *
+ * Returns the number of bytes copied.
+ */
+int nla_memcpy(void *dest, const struct nlattr *src, int count)
+{
+	int minlen = min_t(int, count, nla_len(src));
+
+	memcpy(dest, nla_data(src), minlen);
+
+	return minlen;
+}
+
+/**
+ * nla_memcmp - Compare an attribute with sized memory area
+ * @nla: netlink attribute
+ * @data: memory area
+ * @size: size of memory area
+ */
+int nla_memcmp(const struct nlattr *nla, const void *data,
+			     size_t size)
+{
+	int d = nla_len(nla) - size;
+
+	if (d == 0)
+		d = memcmp(nla_data(nla), data, size);
+
+	return d;
+}
+
+/**
+ * nla_strcmp - Compare a string attribute against a string
+ * @nla: netlink string attribute
+ * @str: another string
+ */
+int nla_strcmp(const struct nlattr *nla, const char *str)
+{
+	int len = strlen(str) + 1;
+	int d = nla_len(nla) - len;
+
+	if (d == 0)
+		d = memcmp(nla_data(nla), str, len);
+
+	return d;
+}
+
+#ifdef CONFIG_NET
+/**
+ * __nla_reserve - reserve room for attribute on the skb
+ * @skb: socket buffer to reserve room on
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ *
+ * Adds a netlink attribute header to a socket buffer and reserves
+ * room for the payload but does not copy it.
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute header and payload.
+ */
+struct nlattr *__nla_reserve(struct sk_buff *skb, int attrtype, int attrlen)
+{
+	struct nlattr *nla;
+
+	nla = (struct nlattr *) skb_put(skb, nla_total_size(attrlen));
+	nla->nla_type = attrtype;
+	nla->nla_len = nla_attr_size(attrlen);
+
+	memset((unsigned char *) nla + nla->nla_len, 0, nla_padlen(attrlen));
+
+	return nla;
+}
+EXPORT_SYMBOL(__nla_reserve);
+
+/**
+ * __nla_reserve_nohdr - reserve room for attribute without header
+ * @skb: socket buffer to reserve room on
+ * @attrlen: length of attribute payload
+ *
+ * Reserves room for attribute payload without a header.
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the payload.
+ */
+void *__nla_reserve_nohdr(struct sk_buff *skb, int attrlen)
+{
+	void *start;
+
+	start = skb_put(skb, NLA_ALIGN(attrlen));
+	memset(start, 0, NLA_ALIGN(attrlen));
+
+	return start;
+}
+EXPORT_SYMBOL(__nla_reserve_nohdr);
+
+/**
+ * nla_reserve - reserve room for attribute on the skb
+ * @skb: socket buffer to reserve room on
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ *
+ * Adds a netlink attribute header to a socket buffer and reserves
+ * room for the payload but does not copy it.
+ *
+ * Returns NULL if the tailroom of the skb is insufficient to store
+ * the attribute header and payload.
+ */
+struct nlattr *nla_reserve(struct sk_buff *skb, int attrtype, int attrlen)
+{
+	if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
+		return NULL;
+
+	return __nla_reserve(skb, attrtype, attrlen);
+}
+EXPORT_SYMBOL(nla_reserve);
+
+/**
+ * nla_reserve_nohdr - reserve room for attribute without header
+ * @skb: socket buffer to reserve room on
+ * @attrlen: length of attribute payload
+ *
+ * Reserves room for attribute payload without a header.
+ *
+ * Returns NULL if the tailroom of the skb is insufficient to store
+ * the attribute payload.
+ */
+void *nla_reserve_nohdr(struct sk_buff *skb, int attrlen)
+{
+	if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
+		return NULL;
+
+	return __nla_reserve_nohdr(skb, attrlen);
+}
+EXPORT_SYMBOL(nla_reserve_nohdr);
+
+/**
+ * __nla_put - Add a netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute header and payload.
+ */
+void __nla_put(struct sk_buff *skb, int attrtype, int attrlen,
+			     const void *data)
+{
+	struct nlattr *nla;
+
+	nla = __nla_reserve(skb, attrtype, attrlen);
+	memcpy(nla_data(nla), data, attrlen);
+}
+EXPORT_SYMBOL(__nla_put);
+
+/**
+ * __nla_put_nohdr - Add a netlink attribute without header
+ * @skb: socket buffer to add attribute to
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * The caller is responsible to ensure that the skb provides enough
+ * tailroom for the attribute payload.
+ */
+void __nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
+{
+	void *start;
+
+	start = __nla_reserve_nohdr(skb, attrlen);
+	memcpy(start, data, attrlen);
+}
+EXPORT_SYMBOL(__nla_put_nohdr);
+
+/**
+ * nla_put - Add a netlink attribute to a socket buffer
+ * @skb: socket buffer to add attribute to
+ * @attrtype: attribute type
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute header and payload.
+ */
+int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data)
+{
+	if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
+		return -EMSGSIZE;
+
+	__nla_put(skb, attrtype, attrlen, data);
+	return 0;
+}
+EXPORT_SYMBOL(nla_put);
+
+/**
+ * nla_put_nohdr - Add a netlink attribute without header
+ * @skb: socket buffer to add attribute to
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute payload.
+ */
+int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
+{
+	if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
+		return -EMSGSIZE;
+
+	__nla_put_nohdr(skb, attrlen, data);
+	return 0;
+}
+EXPORT_SYMBOL(nla_put_nohdr);
+
+/**
+ * nla_append - Add a netlink attribute without header or padding
+ * @skb: socket buffer to add attribute to
+ * @attrlen: length of attribute payload
+ * @data: head of attribute payload
+ *
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
+ * the attribute payload.
+ */
+int nla_append(struct sk_buff *skb, int attrlen, const void *data)
+{
+	if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
+		return -EMSGSIZE;
+
+	memcpy(skb_put(skb, attrlen), data, attrlen);
+	return 0;
+}
+EXPORT_SYMBOL(nla_append);
+#endif
+
+EXPORT_SYMBOL(nla_validate);
+EXPORT_SYMBOL(nla_policy_len);
+EXPORT_SYMBOL(nla_parse);
+EXPORT_SYMBOL(nla_find);
+EXPORT_SYMBOL(nla_strlcpy);
+EXPORT_SYMBOL(nla_memcpy);
+EXPORT_SYMBOL(nla_memcmp);
+EXPORT_SYMBOL(nla_strcmp);
diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h
index df8a6c9..3d17b3d 100644
--- a/lib/zlib_inflate/inflate.h
+++ b/lib/zlib_inflate/inflate.h
@@ -1,3 +1,6 @@
+#ifndef INFLATE_H
+#define INFLATE_H
+
 /* inflate.h -- internal inflate state definition
  * Copyright (C) 1995-2004 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
@@ -105,3 +108,4 @@ struct inflate_state {
     unsigned short work[288];   /* work area for code table building */
     code codes[ENOUGH];         /* space for code tables */
 };
+#endif
diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h
index 5f5219b..b70b473 100644
--- a/lib/zlib_inflate/inftrees.h
+++ b/lib/zlib_inflate/inftrees.h
@@ -1,3 +1,6 @@
+#ifndef INFTREES_H
+#define INFTREES_H
+
 /* inftrees.h -- header to use inftrees.c
  * Copyright (C) 1995-2005 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
@@ -53,3 +56,4 @@ typedef enum {
 extern int zlib_inflate_table (codetype type, unsigned short *lens,
                              unsigned codes, code **table,
                              unsigned *bits, unsigned short *work);
+#endif