summaryrefslogtreecommitdiffstats
path: root/lib
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-10 20:35:41 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-10 20:35:41 -0800
commit350e4f4985472e29091b899bc227d75d2a66fb4c (patch)
tree98d17fe2198025d55511d7a306a787b76c3dde4f /lib
parentc32809521de5b31699a33379183848b0c7628f28 (diff)
parentdb0865543739b3edb2ee9bf340380cf4986b58ff (diff)
downloadop-kernel-dev-350e4f4985472e29091b899bc227d75d2a66fb4c.zip
op-kernel-dev-350e4f4985472e29091b899bc227d75d2a66fb4c.tar.gz
Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq
Diffstat (limited to 'lib')
-rw-r--r--lib/Makefile2
-rw-r--r--lib/seq_buf.c359
2 files changed, 360 insertions, 1 deletions
diff --git a/lib/Makefile b/lib/Makefile
index 0211d2b..923a191 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -13,7 +13,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
sha1.o md5.o irq_regs.o argv_split.o \
proportions.o flex_proportions.o ratelimit.o show_mem.o \
is_single_threaded.o plist.o decompress.o kobject_uevent.o \
- earlycpio.o
+ earlycpio.o seq_buf.o
obj-$(CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS) += usercopy.o
lib-$(CONFIG_MMU) += ioremap.o
diff --git a/lib/seq_buf.c b/lib/seq_buf.c
new file mode 100644
index 0000000..4eedfed
--- /dev/null
+++ b/lib/seq_buf.c
@@ -0,0 +1,359 @@
+/*
+ * seq_buf.c
+ *
+ * Copyright (C) 2014 Red Hat Inc, Steven Rostedt <srostedt@redhat.com>
+ *
+ * The seq_buf is a handy tool that allows you to pass a descriptor around
+ * to a buffer that other functions can write to. It is similar to the
+ * seq_file functionality but has some differences.
+ *
+ * To use it, the seq_buf must be initialized with seq_buf_init().
+ * This will set up the counters within the descriptor. You can call
+ * seq_buf_init() more than once to reset the seq_buf to start
+ * from scratch.
+ */
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+#include <linux/seq_buf.h>
+
+/**
+ * seq_buf_can_fit - can the new data fit in the current buffer?
+ * @s: the seq_buf descriptor
+ * @len: The length to see if it can fit in the current buffer
+ *
+ * Returns true if there's enough unused space in the seq_buf buffer
+ * to fit the amount of new data according to @len.
+ */
+static bool seq_buf_can_fit(struct seq_buf *s, size_t len)
+{
+ return s->len + len <= s->size;
+}
+
+/**
+ * seq_buf_print_seq - move the contents of seq_buf into a seq_file
+ * @m: the seq_file descriptor that is the destination
+ * @s: the seq_buf descriptor that is the source.
+ *
+ * Returns zero on success, non zero otherwise
+ */
+int seq_buf_print_seq(struct seq_file *m, struct seq_buf *s)
+{
+ unsigned int len = seq_buf_used(s);
+
+ return seq_write(m, s->buffer, len);
+}
+
+/**
+ * seq_buf_vprintf - sequence printing of information.
+ * @s: seq_buf descriptor
+ * @fmt: printf format string
+ * @args: va_list of arguments from a printf() type function
+ *
+ * Writes a vnprintf() format into the sequencce buffer.
+ *
+ * Returns zero on success, -1 on overflow.
+ */
+int seq_buf_vprintf(struct seq_buf *s, const char *fmt, va_list args)
+{
+ int len;
+
+ WARN_ON(s->size == 0);
+
+ if (s->len < s->size) {
+ len = vsnprintf(s->buffer + s->len, s->size - s->len, fmt, args);
+ if (seq_buf_can_fit(s, len)) {
+ s->len += len;
+ return 0;
+ }
+ }
+ seq_buf_set_overflow(s);
+ return -1;
+}
+
+/**
+ * seq_buf_printf - sequence printing of information
+ * @s: seq_buf descriptor
+ * @fmt: printf format string
+ *
+ * Writes a printf() format into the sequence buffer.
+ *
+ * Returns zero on success, -1 on overflow.
+ */
+int seq_buf_printf(struct seq_buf *s, const char *fmt, ...)
+{
+ va_list ap;
+ int ret;
+
+ va_start(ap, fmt);
+ ret = seq_buf_vprintf(s, fmt, ap);
+ va_end(ap);
+
+ return ret;
+}
+
+/**
+ * seq_buf_bitmask - write a bitmask array in its ASCII representation
+ * @s: seq_buf descriptor
+ * @maskp: points to an array of unsigned longs that represent a bitmask
+ * @nmaskbits: The number of bits that are valid in @maskp
+ *
+ * Writes a ASCII representation of a bitmask string into @s.
+ *
+ * Returns zero on success, -1 on overflow.
+ */
+int seq_buf_bitmask(struct seq_buf *s, const unsigned long *maskp,
+ int nmaskbits)
+{
+ unsigned int len = seq_buf_buffer_left(s);
+ int ret;
+
+ WARN_ON(s->size == 0);
+
+ /*
+ * Note, because bitmap_scnprintf() only returns the number of bytes
+ * written and not the number that would be written, we use the last
+ * byte of the buffer to let us know if we overflowed. There's a small
+ * chance that the bitmap could have fit exactly inside the buffer, but
+ * it's not that critical if that does happen.
+ */
+ if (len > 1) {
+ ret = bitmap_scnprintf(s->buffer + s->len, len, maskp, nmaskbits);
+ if (ret < len) {
+ s->len += ret;
+ return 0;
+ }
+ }
+ seq_buf_set_overflow(s);
+ return -1;
+}
+
+#ifdef CONFIG_BINARY_PRINTF
+/**
+ * seq_buf_bprintf - Write the printf string from binary arguments
+ * @s: seq_buf descriptor
+ * @fmt: The format string for the @binary arguments
+ * @binary: The binary arguments for @fmt.
+ *
+ * When recording in a fast path, a printf may be recorded with just
+ * saving the format and the arguments as they were passed to the
+ * function, instead of wasting cycles converting the arguments into
+ * ASCII characters. Instead, the arguments are saved in a 32 bit
+ * word array that is defined by the format string constraints.
+ *
+ * This function will take the format and the binary array and finish
+ * the conversion into the ASCII string within the buffer.
+ *
+ * Returns zero on success, -1 on overflow.
+ */
+int seq_buf_bprintf(struct seq_buf *s, const char *fmt, const u32 *binary)
+{
+ unsigned int len = seq_buf_buffer_left(s);
+ int ret;
+
+ WARN_ON(s->size == 0);
+
+ if (s->len < s->size) {
+ ret = bstr_printf(s->buffer + s->len, len, fmt, binary);
+ if (seq_buf_can_fit(s, ret)) {
+ s->len += ret;
+ return 0;
+ }
+ }
+ seq_buf_set_overflow(s);
+ return -1;
+}
+#endif /* CONFIG_BINARY_PRINTF */
+
+/**
+ * seq_buf_puts - sequence printing of simple string
+ * @s: seq_buf descriptor
+ * @str: simple string to record
+ *
+ * Copy a simple string into the sequence buffer.
+ *
+ * Returns zero on success, -1 on overflow
+ */
+int seq_buf_puts(struct seq_buf *s, const char *str)
+{
+ unsigned int len = strlen(str);
+
+ WARN_ON(s->size == 0);
+
+ if (seq_buf_can_fit(s, len)) {
+ memcpy(s->buffer + s->len, str, len);
+ s->len += len;
+ return 0;
+ }
+ seq_buf_set_overflow(s);
+ return -1;
+}
+
+/**
+ * seq_buf_putc - sequence printing of simple character
+ * @s: seq_buf descriptor
+ * @c: simple character to record
+ *
+ * Copy a single character into the sequence buffer.
+ *
+ * Returns zero on success, -1 on overflow
+ */
+int seq_buf_putc(struct seq_buf *s, unsigned char c)
+{
+ WARN_ON(s->size == 0);
+
+ if (seq_buf_can_fit(s, 1)) {
+ s->buffer[s->len++] = c;
+ return 0;
+ }
+ seq_buf_set_overflow(s);
+ return -1;
+}
+
+/**
+ * seq_buf_putmem - write raw data into the sequenc buffer
+ * @s: seq_buf descriptor
+ * @mem: The raw memory to copy into the buffer
+ * @len: The length of the raw memory to copy (in bytes)
+ *
+ * There may be cases where raw memory needs to be written into the
+ * buffer and a strcpy() would not work. Using this function allows
+ * for such cases.
+ *
+ * Returns zero on success, -1 on overflow
+ */
+int seq_buf_putmem(struct seq_buf *s, const void *mem, unsigned int len)
+{
+ WARN_ON(s->size == 0);
+
+ if (seq_buf_can_fit(s, len)) {
+ memcpy(s->buffer + s->len, mem, len);
+ s->len += len;
+ return 0;
+ }
+ seq_buf_set_overflow(s);
+ return -1;
+}
+
+#define MAX_MEMHEX_BYTES 8U
+#define HEX_CHARS (MAX_MEMHEX_BYTES*2 + 1)
+
+/**
+ * seq_buf_putmem_hex - write raw memory into the buffer in ASCII hex
+ * @s: seq_buf descriptor
+ * @mem: The raw memory to write its hex ASCII representation of
+ * @len: The length of the raw memory to copy (in bytes)
+ *
+ * This is similar to seq_buf_putmem() except instead of just copying the
+ * raw memory into the buffer it writes its ASCII representation of it
+ * in hex characters.
+ *
+ * Returns zero on success, -1 on overflow
+ */
+int seq_buf_putmem_hex(struct seq_buf *s, const void *mem,
+ unsigned int len)
+{
+ unsigned char hex[HEX_CHARS];
+ const unsigned char *data = mem;
+ unsigned int start_len;
+ int i, j;
+
+ WARN_ON(s->size == 0);
+
+ while (len) {
+ start_len = min(len, HEX_CHARS - 1);
+#ifdef __BIG_ENDIAN
+ for (i = 0, j = 0; i < start_len; i++) {
+#else
+ for (i = start_len-1, j = 0; i >= 0; i--) {
+#endif
+ hex[j++] = hex_asc_hi(data[i]);
+ hex[j++] = hex_asc_lo(data[i]);
+ }
+ if (WARN_ON_ONCE(j == 0 || j/2 > len))
+ break;
+
+ /* j increments twice per loop */
+ len -= j / 2;
+ hex[j++] = ' ';
+
+ seq_buf_putmem(s, hex, j);
+ if (seq_buf_has_overflowed(s))
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * seq_buf_path - copy a path into the sequence buffer
+ * @s: seq_buf descriptor
+ * @path: path to write into the sequence buffer.
+ * @esc: set of characters to escape in the output
+ *
+ * Write a path name into the sequence buffer.
+ *
+ * Returns the number of written bytes on success, -1 on overflow
+ */
+int seq_buf_path(struct seq_buf *s, const struct path *path, const char *esc)
+{
+ char *buf;
+ size_t size = seq_buf_get_buf(s, &buf);
+ int res = -1;
+
+ WARN_ON(s->size == 0);
+
+ if (size) {
+ char *p = d_path(path, buf, size);
+ if (!IS_ERR(p)) {
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
+ }
+ }
+ seq_buf_commit(s, res);
+
+ return res;
+}
+
+/**
+ * seq_buf_to_user - copy the squence buffer to user space
+ * @s: seq_buf descriptor
+ * @ubuf: The userspace memory location to copy to
+ * @cnt: The amount to copy
+ *
+ * Copies the sequence buffer into the userspace memory pointed to
+ * by @ubuf. It starts from the last read position (@s->readpos)
+ * and writes up to @cnt characters or till it reaches the end of
+ * the content in the buffer (@s->len), which ever comes first.
+ *
+ * On success, it returns a positive number of the number of bytes
+ * it copied.
+ *
+ * On failure it returns -EBUSY if all of the content in the
+ * sequence has been already read, which includes nothing in the
+ * sequence (@s->len == @s->readpos).
+ *
+ * Returns -EFAULT if the copy to userspace fails.
+ */
+int seq_buf_to_user(struct seq_buf *s, char __user *ubuf, int cnt)
+{
+ int len;
+ int ret;
+
+ if (!cnt)
+ return 0;
+
+ if (s->len <= s->readpos)
+ return -EBUSY;
+
+ len = seq_buf_used(s) - s->readpos;
+ if (cnt > len)
+ cnt = len;
+ ret = copy_to_user(ubuf, s->buffer + s->readpos, cnt);
+ if (ret == cnt)
+ return -EFAULT;
+
+ cnt -= ret;
+
+ s->readpos += cnt;
+ return cnt;
+}
OpenPOWER on IntegriCloud