summaryrefslogtreecommitdiffstats
path: root/kernel
diff options
context:
space:
mode:
authorWaiman Long <Waiman.Long@hp.com>2013-04-17 15:23:12 -0400
committerIngo Molnar <mingo@kernel.org>2013-04-19 09:33:35 +0200
commit0dc8c730c98a06a4d927f8d08bd0dd6de973b8dd (patch)
treec7f9a0194315b011feea42ccdbc1443f41116916 /kernel
parent41fcb9f230bf773656d1768b73000ef720bf00c3 (diff)
downloadop-kernel-dev-0dc8c730c98a06a4d927f8d08bd0dd6de973b8dd.zip
op-kernel-dev-0dc8c730c98a06a4d927f8d08bd0dd6de973b8dd.tar.gz
mutex: Make more scalable by doing less atomic operations
In the __mutex_lock_common() function, an initial entry into the lock slow path will cause two atomic_xchg instructions to be issued. Together with the atomic decrement in the fast path, a total of three atomic read-modify-write instructions will be issued in rapid succession. This can cause a lot of cache bouncing when many tasks are trying to acquire the mutex at the same time. This patch will reduce the number of atomic_xchg instructions used by checking the counter value first before issuing the instruction. The atomic_read() function is just a simple memory read. The atomic_xchg() function, on the other hand, can be up to 2 order of magnitude or even more in cost when compared with atomic_read(). By using atomic_read() to check the value first before calling atomic_xchg(), we can avoid a lot of unnecessary cache coherency traffic. The only downside with this change is that a task on the slow path will have a tiny bit less chance of getting the mutex when competing with another task in the fast path. The same is true for the atomic_cmpxchg() function in the mutex-spin-on-owner loop. So an atomic_read() is also performed before calling atomic_cmpxchg(). The mutex locking and unlocking code for the x86 architecture can allow any negative number to be used in the mutex count to indicate that some tasks are waiting for the mutex. I am not so sure if that is the case for the other architectures. So the default is to avoid atomic_xchg() if the count has already been set to -1. For x86, the check is modified to include all negative numbers to cover a larger case. The following table shows the jobs per minutes (JPM) scalability data on an 8-node 80-core Westmere box with a 3.7.10 kernel. The numactl command is used to restrict the running of the high_systime workloads to 1/2/4/8 nodes with hyperthreading on and off. +-----------------+-----------+------------+----------+ | Configuration | Mean JPM | Mean JPM | % Change | | | w/o patch | with patch | | +-----------------+-----------------------------------+ | | User Range 1100 - 2000 | +-----------------+-----------------------------------+ | 8 nodes, HT on | 36980 | 148590 | +301.8% | | 8 nodes, HT off | 42799 | 145011 | +238.8% | | 4 nodes, HT on | 61318 | 118445 | +51.1% | | 4 nodes, HT off | 158481 | 158592 | +0.1% | | 2 nodes, HT on | 180602 | 173967 | -3.7% | | 2 nodes, HT off | 198409 | 198073 | -0.2% | | 1 node , HT on | 149042 | 147671 | -0.9% | | 1 node , HT off | 126036 | 126533 | +0.4% | +-----------------+-----------------------------------+ | | User Range 200 - 1000 | +-----------------+-----------------------------------+ | 8 nodes, HT on | 41525 | 122349 | +194.6% | | 8 nodes, HT off | 49866 | 124032 | +148.7% | | 4 nodes, HT on | 66409 | 106984 | +61.1% | | 4 nodes, HT off | 119880 | 130508 | +8.9% | | 2 nodes, HT on | 138003 | 133948 | -2.9% | | 2 nodes, HT off | 132792 | 131997 | -0.6% | | 1 node , HT on | 116593 | 115859 | -0.6% | | 1 node , HT off | 104499 | 104597 | +0.1% | +-----------------+------------+-----------+----------+ At low user range 10-100, the JPM differences were within +/-1%. So they are not that interesting. AIM7 benchmark run has a pretty large run-to-run variance due to random nature of the subtests executed. So a difference of less than +-5% may not be really significant. This patch improves high_systime workload performance at 4 nodes and up by maintaining transaction rates without significant drop-off at high node count. The patch has practically no impact on 1 and 2 nodes system. The table below shows the percentage time (as reported by perf record -a -s -g) spent on the __mutex_lock_slowpath() function by the high_systime workload at 1500 users for 2/4/8-node configurations with hyperthreading off. +---------------+-----------------+------------------+---------+ | Configuration | %Time w/o patch | %Time with patch | %Change | +---------------+-----------------+------------------+---------+ | 8 nodes | 65.34% | 0.69% | -99% | | 4 nodes | 8.70% | 1.02% | -88% | | 2 nodes | 0.41% | 0.32% | -22% | +---------------+-----------------+------------------+---------+ It is obvious that the dramatic performance improvement at 8 nodes was due to the drastic cut in the time spent within the __mutex_lock_slowpath() function. The table below show the improvements in other AIM7 workloads (at 8 nodes, hyperthreading off). +--------------+---------------+----------------+-----------------+ | Workload | mean % change | mean % change | mean % change | | | 10-100 users | 200-1000 users | 1100-2000 users | +--------------+---------------+----------------+-----------------+ | alltests | +0.6% | +104.2% | +185.9% | | five_sec | +1.9% | +0.9% | +0.9% | | fserver | +1.4% | -7.7% | +5.1% | | new_fserver | -0.5% | +3.2% | +3.1% | | shared | +13.1% | +146.1% | +181.5% | | short | +7.4% | +5.0% | +4.2% | +--------------+---------------+----------------+-----------------+ Signed-off-by: Waiman Long <Waiman.Long@hp.com> Reviewed-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chandramouleeswaran Aswin <aswin@hp.com> Cc: Norton: Scott J <scott.norton@hp.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowells@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1366226594-5506-3-git-send-email-Waiman.Long@hp.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Diffstat (limited to 'kernel')
-rw-r--r--kernel/mutex.c19
1 files changed, 16 insertions, 3 deletions
diff --git a/kernel/mutex.c b/kernel/mutex.c
index 262d717..70ebd85 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -37,6 +37,17 @@
# include <asm/mutex.h>
#endif
+/*
+ * A mutex count of -1 indicates that waiters are sleeping waiting for the
+ * mutex. Some architectures can allow any negative number, not just -1, for
+ * this purpose.
+ */
+#ifdef __ARCH_ALLOW_ANY_NEGATIVE_MUTEX_COUNT
+#define MUTEX_SHOW_NO_WAITER(mutex) (atomic_read(&(mutex)->count) >= 0)
+#else
+#define MUTEX_SHOW_NO_WAITER(mutex) (atomic_read(&(mutex)->count) != -1)
+#endif
+
void
__mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key)
{
@@ -217,7 +228,8 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
if (owner && !mutex_spin_on_owner(lock, owner))
break;
- if (atomic_cmpxchg(&lock->count, 1, 0) == 1) {
+ if ((atomic_read(&lock->count) == 1) &&
+ (atomic_cmpxchg(&lock->count, 1, 0) == 1)) {
lock_acquired(&lock->dep_map, ip);
mutex_set_owner(lock);
preempt_enable();
@@ -251,7 +263,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
list_add_tail(&waiter.list, &lock->wait_list);
waiter.task = task;
- if (atomic_xchg(&lock->count, -1) == 1)
+ if (MUTEX_SHOW_NO_WAITER(lock) && (atomic_xchg(&lock->count, -1) == 1))
goto done;
lock_contended(&lock->dep_map, ip);
@@ -266,7 +278,8 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
* that when we release the lock, we properly wake up the
* other waiters:
*/
- if (atomic_xchg(&lock->count, -1) == 1)
+ if (MUTEX_SHOW_NO_WAITER(lock) &&
+ (atomic_xchg(&lock->count, -1) == 1))
break;
/*
OpenPOWER on IntegriCloud