summaryrefslogtreecommitdiffstats
path: root/kernel
diff options
context:
space:
mode:
authorSteven Rostedt <rostedt@goodmis.org>2008-02-29 18:46:50 +0100
committerIngo Molnar <mingo@elte.hu>2008-02-29 18:46:50 +0100
commit2232c2d8e0a6a31061dec311f3d1cf7624bc14f1 (patch)
tree1d90ec0b8bd4e3c154e386f005ef596ee25fa53f /kernel
parentc0f4133b8f70769bc8dda977feb9a29109d6ccca (diff)
downloadop-kernel-dev-2232c2d8e0a6a31061dec311f3d1cf7624bc14f1.zip
op-kernel-dev-2232c2d8e0a6a31061dec311f3d1cf7624bc14f1.tar.gz
rcu: add support for dynamic ticks and preempt rcu
The PREEMPT-RCU can get stuck if a CPU goes idle and NO_HZ is set. The idle CPU will not progress the RCU through its grace period and a synchronize_rcu my get stuck. Without this patch I have a box that will not boot when PREEMPT_RCU and NO_HZ are set. That same box boots fine with this patch. This patch comes from the -rt kernel where it has been tested for several months. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'kernel')
-rw-r--r--kernel/rcupreempt.c224
-rw-r--r--kernel/softirq.c1
-rw-r--r--kernel/time/tick-sched.c3
3 files changed, 224 insertions, 4 deletions
diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c
index 987cfb7..c7c5209 100644
--- a/kernel/rcupreempt.c
+++ b/kernel/rcupreempt.c
@@ -23,6 +23,10 @@
* to Suparna Bhattacharya for pushing me completely away
* from atomic instructions on the read side.
*
+ * - Added handling of Dynamic Ticks
+ * Copyright 2007 - Paul E. Mckenney <paulmck@us.ibm.com>
+ * - Steven Rostedt <srostedt@redhat.com>
+ *
* Papers: http://www.rdrop.com/users/paulmck/RCU
*
* Design Document: http://lwn.net/Articles/253651/
@@ -409,6 +413,212 @@ static void __rcu_advance_callbacks(struct rcu_data *rdp)
}
}
+#ifdef CONFIG_NO_HZ
+
+DEFINE_PER_CPU(long, dynticks_progress_counter) = 1;
+static DEFINE_PER_CPU(long, rcu_dyntick_snapshot);
+static DEFINE_PER_CPU(int, rcu_update_flag);
+
+/**
+ * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI.
+ *
+ * If the CPU was idle with dynamic ticks active, this updates the
+ * dynticks_progress_counter to let the RCU handling know that the
+ * CPU is active.
+ */
+void rcu_irq_enter(void)
+{
+ int cpu = smp_processor_id();
+
+ if (per_cpu(rcu_update_flag, cpu))
+ per_cpu(rcu_update_flag, cpu)++;
+
+ /*
+ * Only update if we are coming from a stopped ticks mode
+ * (dynticks_progress_counter is even).
+ */
+ if (!in_interrupt() &&
+ (per_cpu(dynticks_progress_counter, cpu) & 0x1) == 0) {
+ /*
+ * The following might seem like we could have a race
+ * with NMI/SMIs. But this really isn't a problem.
+ * Here we do a read/modify/write, and the race happens
+ * when an NMI/SMI comes in after the read and before
+ * the write. But NMI/SMIs will increment this counter
+ * twice before returning, so the zero bit will not
+ * be corrupted by the NMI/SMI which is the most important
+ * part.
+ *
+ * The only thing is that we would bring back the counter
+ * to a postion that it was in during the NMI/SMI.
+ * But the zero bit would be set, so the rest of the
+ * counter would again be ignored.
+ *
+ * On return from the IRQ, the counter may have the zero
+ * bit be 0 and the counter the same as the return from
+ * the NMI/SMI. If the state machine was so unlucky to
+ * see that, it still doesn't matter, since all
+ * RCU read-side critical sections on this CPU would
+ * have already completed.
+ */
+ per_cpu(dynticks_progress_counter, cpu)++;
+ /*
+ * The following memory barrier ensures that any
+ * rcu_read_lock() primitives in the irq handler
+ * are seen by other CPUs to follow the above
+ * increment to dynticks_progress_counter. This is
+ * required in order for other CPUs to correctly
+ * determine when it is safe to advance the RCU
+ * grace-period state machine.
+ */
+ smp_mb(); /* see above block comment. */
+ /*
+ * Since we can't determine the dynamic tick mode from
+ * the dynticks_progress_counter after this routine,
+ * we use a second flag to acknowledge that we came
+ * from an idle state with ticks stopped.
+ */
+ per_cpu(rcu_update_flag, cpu)++;
+ /*
+ * If we take an NMI/SMI now, they will also increment
+ * the rcu_update_flag, and will not update the
+ * dynticks_progress_counter on exit. That is for
+ * this IRQ to do.
+ */
+ }
+}
+
+/**
+ * rcu_irq_exit - Called from exiting Hard irq context.
+ *
+ * If the CPU was idle with dynamic ticks active, update the
+ * dynticks_progress_counter to put let the RCU handling be
+ * aware that the CPU is going back to idle with no ticks.
+ */
+void rcu_irq_exit(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * rcu_update_flag is set if we interrupted the CPU
+ * when it was idle with ticks stopped.
+ * Once this occurs, we keep track of interrupt nesting
+ * because a NMI/SMI could also come in, and we still
+ * only want the IRQ that started the increment of the
+ * dynticks_progress_counter to be the one that modifies
+ * it on exit.
+ */
+ if (per_cpu(rcu_update_flag, cpu)) {
+ if (--per_cpu(rcu_update_flag, cpu))
+ return;
+
+ /* This must match the interrupt nesting */
+ WARN_ON(in_interrupt());
+
+ /*
+ * If an NMI/SMI happens now we are still
+ * protected by the dynticks_progress_counter being odd.
+ */
+
+ /*
+ * The following memory barrier ensures that any
+ * rcu_read_unlock() primitives in the irq handler
+ * are seen by other CPUs to preceed the following
+ * increment to dynticks_progress_counter. This
+ * is required in order for other CPUs to determine
+ * when it is safe to advance the RCU grace-period
+ * state machine.
+ */
+ smp_mb(); /* see above block comment. */
+ per_cpu(dynticks_progress_counter, cpu)++;
+ WARN_ON(per_cpu(dynticks_progress_counter, cpu) & 0x1);
+ }
+}
+
+static void dyntick_save_progress_counter(int cpu)
+{
+ per_cpu(rcu_dyntick_snapshot, cpu) =
+ per_cpu(dynticks_progress_counter, cpu);
+}
+
+static inline int
+rcu_try_flip_waitack_needed(int cpu)
+{
+ long curr;
+ long snap;
+
+ curr = per_cpu(dynticks_progress_counter, cpu);
+ snap = per_cpu(rcu_dyntick_snapshot, cpu);
+ smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+ /*
+ * If the CPU remained in dynticks mode for the entire time
+ * and didn't take any interrupts, NMIs, SMIs, or whatever,
+ * then it cannot be in the middle of an rcu_read_lock(), so
+ * the next rcu_read_lock() it executes must use the new value
+ * of the counter. So we can safely pretend that this CPU
+ * already acknowledged the counter.
+ */
+
+ if ((curr == snap) && ((curr & 0x1) == 0))
+ return 0;
+
+ /*
+ * If the CPU passed through or entered a dynticks idle phase with
+ * no active irq handlers, then, as above, we can safely pretend
+ * that this CPU already acknowledged the counter.
+ */
+
+ if ((curr - snap) > 2 || (snap & 0x1) == 0)
+ return 0;
+
+ /* We need this CPU to explicitly acknowledge the counter flip. */
+
+ return 1;
+}
+
+static inline int
+rcu_try_flip_waitmb_needed(int cpu)
+{
+ long curr;
+ long snap;
+
+ curr = per_cpu(dynticks_progress_counter, cpu);
+ snap = per_cpu(rcu_dyntick_snapshot, cpu);
+ smp_mb(); /* force ordering with cpu entering/leaving dynticks. */
+
+ /*
+ * If the CPU remained in dynticks mode for the entire time
+ * and didn't take any interrupts, NMIs, SMIs, or whatever,
+ * then it cannot have executed an RCU read-side critical section
+ * during that time, so there is no need for it to execute a
+ * memory barrier.
+ */
+
+ if ((curr == snap) && ((curr & 0x1) == 0))
+ return 0;
+
+ /*
+ * If the CPU either entered or exited an outermost interrupt,
+ * SMI, NMI, or whatever handler, then we know that it executed
+ * a memory barrier when doing so. So we don't need another one.
+ */
+ if (curr != snap)
+ return 0;
+
+ /* We need the CPU to execute a memory barrier. */
+
+ return 1;
+}
+
+#else /* !CONFIG_NO_HZ */
+
+# define dyntick_save_progress_counter(cpu) do { } while (0)
+# define rcu_try_flip_waitack_needed(cpu) (1)
+# define rcu_try_flip_waitmb_needed(cpu) (1)
+
+#endif /* CONFIG_NO_HZ */
+
/*
* Get here when RCU is idle. Decide whether we need to
* move out of idle state, and return non-zero if so.
@@ -447,8 +657,10 @@ rcu_try_flip_idle(void)
/* Now ask each CPU for acknowledgement of the flip. */
- for_each_cpu_mask(cpu, rcu_cpu_online_map)
+ for_each_cpu_mask(cpu, rcu_cpu_online_map) {
per_cpu(rcu_flip_flag, cpu) = rcu_flipped;
+ dyntick_save_progress_counter(cpu);
+ }
return 1;
}
@@ -464,7 +676,8 @@ rcu_try_flip_waitack(void)
RCU_TRACE_ME(rcupreempt_trace_try_flip_a1);
for_each_cpu_mask(cpu, rcu_cpu_online_map)
- if (per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
+ if (rcu_try_flip_waitack_needed(cpu) &&
+ per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) {
RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1);
return 0;
}
@@ -509,8 +722,10 @@ rcu_try_flip_waitzero(void)
smp_mb(); /* ^^^^^^^^^^^^ */
/* Call for a memory barrier from each CPU. */
- for_each_cpu_mask(cpu, rcu_cpu_online_map)
+ for_each_cpu_mask(cpu, rcu_cpu_online_map) {
per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed;
+ dyntick_save_progress_counter(cpu);
+ }
RCU_TRACE_ME(rcupreempt_trace_try_flip_z2);
return 1;
@@ -528,7 +743,8 @@ rcu_try_flip_waitmb(void)
RCU_TRACE_ME(rcupreempt_trace_try_flip_m1);
for_each_cpu_mask(cpu, rcu_cpu_online_map)
- if (per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
+ if (rcu_try_flip_waitmb_needed(cpu) &&
+ per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) {
RCU_TRACE_ME(rcupreempt_trace_try_flip_me1);
return 0;
}
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 5b3aea5..31e9f2a 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -313,6 +313,7 @@ void irq_exit(void)
/* Make sure that timer wheel updates are propagated */
if (!in_interrupt() && idle_cpu(smp_processor_id()) && !need_resched())
tick_nohz_stop_sched_tick();
+ rcu_irq_exit();
#endif
preempt_enable_no_resched();
}
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index fa9bb73..2968298 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -282,6 +282,7 @@ void tick_nohz_stop_sched_tick(void)
ts->idle_tick = ts->sched_timer.expires;
ts->tick_stopped = 1;
ts->idle_jiffies = last_jiffies;
+ rcu_enter_nohz();
}
/*
@@ -375,6 +376,8 @@ void tick_nohz_restart_sched_tick(void)
return;
}
+ rcu_exit_nohz();
+
/* Update jiffies first */
select_nohz_load_balancer(0);
now = ktime_get();
OpenPOWER on IntegriCloud