summaryrefslogtreecommitdiffstats
path: root/kernel
diff options
context:
space:
mode:
authorSteven Rostedt (Red Hat) <rostedt@goodmis.org>2014-11-17 23:08:24 -0500
committerSteven Rostedt <rostedt@goodmis.org>2014-11-18 23:06:35 -0500
commita9ce7c36aa4256019180c590d60e2fad7431c749 (patch)
treefe45059ee1cabf08885823a8db12d56038a28e86 /kernel
parent4526d0676a150dce7a93ad93e03bef7f77e7c906 (diff)
downloadop-kernel-dev-a9ce7c36aa4256019180c590d60e2fad7431c749.zip
op-kernel-dev-a9ce7c36aa4256019180c590d60e2fad7431c749.tar.gz
tracing: Fix race of function probes counting
The function probe counting for traceon and traceoff suffered a race condition where if the probe was executing on two or more CPUs at the same time, it could decrement the counter by more than one when disabling (or enabling) the tracer only once. The way the traceon and traceoff probes are suppose to work is that they disable (or enable) tracing once per count. If a user were to echo 'schedule:traceoff:3' into set_ftrace_filter, then when the schedule function was called, it would disable tracing. But the count should only be decremented once (to 2). Then if the user enabled tracing again (via tracing_on file), the next call to schedule would disable tracing again and the count would be decremented to 1. But if multiple CPUS called schedule at the same time, it is possible that the count would be decremented more than once because of the simple "count--" used. By reading the count into a local variable and using memory barriers we can guarantee that the count would only be decremented once per disable (or enable). The stack trace probe had a similar race, but here the stack trace will decrement for each time it is called. But this had the read-modify- write race, where it could stack trace more than the number of times that was specified. This case we use a cmpxchg to stack trace only the number of times specified. The dump probes can still use the old "update_count()" function as they only run once, and that is controlled by the dump logic itself. Link: http://lkml.kernel.org/r/20141118134643.4b550ee4@gandalf.local.home Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Diffstat (limited to 'kernel')
-rw-r--r--kernel/trace/trace_functions.c117
1 files changed, 96 insertions, 21 deletions
diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c
index a8e0c76..973db52 100644
--- a/kernel/trace/trace_functions.c
+++ b/kernel/trace/trace_functions.c
@@ -261,37 +261,74 @@ static struct tracer function_trace __tracer_data =
};
#ifdef CONFIG_DYNAMIC_FTRACE
-static int update_count(void **data)
+static void update_traceon_count(void **data, int on)
{
- unsigned long *count = (long *)data;
+ long *count = (long *)data;
+ long old_count = *count;
- if (!*count)
- return 0;
+ /*
+ * Tracing gets disabled (or enabled) once per count.
+ * This function can be called at the same time on mulitple CPUs.
+ * It is fine if both disable (or enable) tracing, as disabling
+ * (or enabling) the second time doesn't do anything as the
+ * state of the tracer is already disabled (or enabled).
+ * What needs to be synchronized in this case is that the count
+ * only gets decremented once, even if the tracer is disabled
+ * (or enabled) twice, as the second one is really a nop.
+ *
+ * The memory barriers guarantee that we only decrement the
+ * counter once. First the count is read to a local variable
+ * and a read barrier is used to make sure that it is loaded
+ * before checking if the tracer is in the state we want.
+ * If the tracer is not in the state we want, then the count
+ * is guaranteed to be the old count.
+ *
+ * Next the tracer is set to the state we want (disabled or enabled)
+ * then a write memory barrier is used to make sure that
+ * the new state is visible before changing the counter by
+ * one minus the old counter. This guarantees that another CPU
+ * executing this code will see the new state before seeing
+ * the new counter value, and would not do anthing if the new
+ * counter is seen.
+ *
+ * Note, there is no synchronization between this and a user
+ * setting the tracing_on file. But we currently don't care
+ * about that.
+ */
+ if (!old_count)
+ return;
- if (*count != -1)
- (*count)--;
+ /* Make sure we see count before checking tracing state */
+ smp_rmb();
- return 1;
+ if (on == !!tracing_is_on())
+ return;
+
+ if (on)
+ tracing_on();
+ else
+ tracing_off();
+
+ /* unlimited? */
+ if (old_count == -1)
+ return;
+
+ /* Make sure tracing state is visible before updating count */
+ smp_wmb();
+
+ *count = old_count - 1;
}
static void
ftrace_traceon_count(unsigned long ip, unsigned long parent_ip, void **data)
{
- if (tracing_is_on())
- return;
-
- if (update_count(data))
- tracing_on();
+ update_traceon_count(data, 1);
}
static void
ftrace_traceoff_count(unsigned long ip, unsigned long parent_ip, void **data)
{
- if (!tracing_is_on())
- return;
-
- if (update_count(data))
- tracing_off();
+ update_traceon_count(data, 0);
}
static void
@@ -330,11 +367,49 @@ ftrace_stacktrace(unsigned long ip, unsigned long parent_ip, void **data)
static void
ftrace_stacktrace_count(unsigned long ip, unsigned long parent_ip, void **data)
{
- if (!tracing_is_on())
- return;
+ long *count = (long *)data;
+ long old_count;
+ long new_count;
- if (update_count(data))
- trace_dump_stack(STACK_SKIP);
+ /*
+ * Stack traces should only execute the number of times the
+ * user specified in the counter.
+ */
+ do {
+
+ if (!tracing_is_on())
+ return;
+
+ old_count = *count;
+
+ if (!old_count)
+ return;
+
+ /* unlimited? */
+ if (old_count == -1) {
+ trace_dump_stack(STACK_SKIP);
+ return;
+ }
+
+ new_count = old_count - 1;
+ new_count = cmpxchg(count, old_count, new_count);
+ if (new_count == old_count)
+ trace_dump_stack(STACK_SKIP);
+
+ } while (new_count != old_count);
+}
+
+static int update_count(void **data)
+{
+ unsigned long *count = (long *)data;
+
+ if (!*count)
+ return 0;
+
+ if (*count != -1)
+ (*count)--;
+
+ return 1;
}
static void
OpenPOWER on IntegriCloud