summaryrefslogtreecommitdiffstats
path: root/kernel
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2017-07-11 23:41:52 +0200
committerThomas Gleixner <tglx@linutronix.de>2017-07-12 10:14:42 +0200
commit19d39a3810e7032f311ef83effdac40339b9d022 (patch)
tree5a7ee202d0b6eb8e8f34df2f9fb5536007acb4c1 /kernel
parentc5c601c4295f89368f4a304cb3ae4aebdf80db22 (diff)
downloadop-kernel-dev-19d39a3810e7032f311ef83effdac40339b9d022.zip
op-kernel-dev-19d39a3810e7032f311ef83effdac40339b9d022.tar.gz
genirq: Keep chip buslock across irq_request/release_resources()
Moving the irq_request/release_resources() callbacks out of the spinlocked, irq disabled and bus locked region, unearthed an interesting abuse of the irq_bus_lock/irq_bus_sync_unlock() callbacks. The OMAP GPIO driver does merily power management inside of them. The irq_request_resources() callback of this GPIO irqchip calls a function which reads a GPIO register. That read aborts now because the clock of the GPIO block is not magically enabled via the irq_bus_lock() callback. Move the callbacks under the bus lock again to prevent this. In the free_irq() path this requires to drop the bus_lock before calling synchronize_irq() and reaquiring it before calling the irq_release_resources() callback. The bus lock can't be held because: 1) The data which has been changed between bus_lock/un_lock is cached in the irq chip driver private data and needs to go out to the irq chip via the slow bus (usually SPI or I2C) before calling synchronize_irq(). That's the reason why this bus_lock/unlock magic exists in the first place, as you cannot do SPI/I2C transactions while holding desc->lock with interrupts disabled. 2) synchronize_irq() will actually deadlock, if there is a handler on flight. These chips use threaded handlers for obvious reasons, as they allow to do SPI/I2C communication. When the threaded handler returns then bus_lock needs to be taken in irq_finalize_oneshot() as we need to talk to the actual irq chip once more. After that the threaded handler is marked done, which makes synchronize_irq() return. So if we hold bus_lock accross the synchronize_irq() call, the handler cannot mark itself done because it blocks on the bus lock. That in turn makes synchronize_irq() wait forever on the threaded handler to complete.... Add the missing unlock of desc->request_mutex in the error path of __free_irq() and add a bunch of comments to explain the locking and protection rules. Fixes: 46e48e257360 ("genirq: Move irq resource handling out of spinlocked region") Reported-and-tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reported-and-tested-by: Tony Lindgren <tony@atomide.com> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Not-longer-ranted-at-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com>
Diffstat (limited to 'kernel')
-rw-r--r--kernel/irq/manage.c63
1 files changed, 53 insertions, 10 deletions
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 5624b2d..1d1a5b9 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1090,6 +1090,16 @@ setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
/*
* Internal function to register an irqaction - typically used to
* allocate special interrupts that are part of the architecture.
+ *
+ * Locking rules:
+ *
+ * desc->request_mutex Provides serialization against a concurrent free_irq()
+ * chip_bus_lock Provides serialization for slow bus operations
+ * desc->lock Provides serialization against hard interrupts
+ *
+ * chip_bus_lock and desc->lock are sufficient for all other management and
+ * interrupt related functions. desc->request_mutex solely serializes
+ * request/free_irq().
*/
static int
__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
@@ -1167,20 +1177,35 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
new->flags &= ~IRQF_ONESHOT;
+ /*
+ * Protects against a concurrent __free_irq() call which might wait
+ * for synchronize_irq() to complete without holding the optional
+ * chip bus lock and desc->lock.
+ */
mutex_lock(&desc->request_mutex);
+
+ /*
+ * Acquire bus lock as the irq_request_resources() callback below
+ * might rely on the serialization or the magic power management
+ * functions which are abusing the irq_bus_lock() callback,
+ */
+ chip_bus_lock(desc);
+
+ /* First installed action requests resources. */
if (!desc->action) {
ret = irq_request_resources(desc);
if (ret) {
pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
new->name, irq, desc->irq_data.chip->name);
- goto out_mutex;
+ goto out_bus_unlock;
}
}
- chip_bus_lock(desc);
-
/*
* The following block of code has to be executed atomically
+ * protected against a concurrent interrupt and any of the other
+ * management calls which are not serialized via
+ * desc->request_mutex or the optional bus lock.
*/
raw_spin_lock_irqsave(&desc->lock, flags);
old_ptr = &desc->action;
@@ -1286,10 +1311,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
ret = __irq_set_trigger(desc,
new->flags & IRQF_TRIGGER_MASK);
- if (ret) {
- irq_release_resources(desc);
+ if (ret)
goto out_unlock;
- }
}
desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
@@ -1385,12 +1408,10 @@ mismatch:
out_unlock:
raw_spin_unlock_irqrestore(&desc->lock, flags);
- chip_bus_sync_unlock(desc);
-
if (!desc->action)
irq_release_resources(desc);
-
-out_mutex:
+out_bus_unlock:
+ chip_bus_sync_unlock(desc);
mutex_unlock(&desc->request_mutex);
out_thread:
@@ -1472,6 +1493,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
WARN(1, "Trying to free already-free IRQ %d\n", irq);
raw_spin_unlock_irqrestore(&desc->lock, flags);
chip_bus_sync_unlock(desc);
+ mutex_unlock(&desc->request_mutex);
return NULL;
}
@@ -1498,6 +1520,20 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
#endif
raw_spin_unlock_irqrestore(&desc->lock, flags);
+ /*
+ * Drop bus_lock here so the changes which were done in the chip
+ * callbacks above are synced out to the irq chips which hang
+ * behind a slow bus (I2C, SPI) before calling synchronize_irq().
+ *
+ * Aside of that the bus_lock can also be taken from the threaded
+ * handler in irq_finalize_oneshot() which results in a deadlock
+ * because synchronize_irq() would wait forever for the thread to
+ * complete, which is blocked on the bus lock.
+ *
+ * The still held desc->request_mutex() protects against a
+ * concurrent request_irq() of this irq so the release of resources
+ * and timing data is properly serialized.
+ */
chip_bus_sync_unlock(desc);
unregister_handler_proc(irq, action);
@@ -1530,8 +1566,15 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
}
}
+ /* Last action releases resources */
if (!desc->action) {
+ /*
+ * Reaquire bus lock as irq_release_resources() might
+ * require it to deallocate resources over the slow bus.
+ */
+ chip_bus_lock(desc);
irq_release_resources(desc);
+ chip_bus_sync_unlock(desc);
irq_remove_timings(desc);
}
OpenPOWER on IntegriCloud