Merge commit 'v3.3-rc6' into next

7 files changed, 241 insertions, 76 deletions

diff --git a/kernel/time/Kconfig b/kernel/time/Kconfig
index b26c2228..2cf9cc7 100644
--- a/kernel/time/Kconfig
+++ b/kernel/time/Kconfig
@@ -25,7 +25,7 @@ config HIGH_RES_TIMERS
 config GENERIC_CLOCKEVENTS_BUILD
 	bool
 	default y
-	depends on GENERIC_CLOCKEVENTS || GENERIC_CLOCKEVENTS_MIGR
+	depends on GENERIC_CLOCKEVENTS
 
 config GENERIC_CLOCKEVENTS_MIN_ADJUST
 	bool
diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c
index c436e79..8a46f5d 100644
--- a/kernel/time/alarmtimer.c
+++ b/kernel/time/alarmtimer.c
@@ -195,7 +195,7 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer)
 		struct alarm *alarm;
 		ktime_t expired = next->expires;
 
-		if (expired.tv64 >= now.tv64)
+		if (expired.tv64 > now.tv64)
 			break;
 
 		alarm = container_of(next, struct alarm, node);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 1ecd6ba..9cd928f 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -17,7 +17,6 @@
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/smp.h>
-#include <linux/sysdev.h>
 
 #include "tick-internal.h"
 
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index cf52fda..a45ca16 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -23,8 +23,8 @@
  *   o Allow clocksource drivers to be unregistered
  */
 
+#include <linux/device.h>
 #include <linux/clocksource.h>
-#include <linux/sysdev.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/sched.h> /* for spin_unlock_irq() using preempt_count() m68k */
@@ -492,6 +492,22 @@ void clocksource_touch_watchdog(void)
 }
 
 /**
+ * clocksource_max_adjustment- Returns max adjustment amount
+ * @cs:         Pointer to clocksource
+ *
+ */
+static u32 clocksource_max_adjustment(struct clocksource *cs)
+{
+	u64 ret;
+	/*
+	 * We won't try to correct for more then 11% adjustments (110,000 ppm),
+	 */
+	ret = (u64)cs->mult * 11;
+	do_div(ret,100);
+	return (u32)ret;
+}
+
+/**
  * clocksource_max_deferment - Returns max time the clocksource can be deferred
  * @cs:         Pointer to clocksource
  *
@@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
 	/*
 	 * Calculate the maximum number of cycles that we can pass to the
 	 * cyc2ns function without overflowing a 64-bit signed result. The
-	 * maximum number of cycles is equal to ULLONG_MAX/cs->mult which
-	 * is equivalent to the below.
-	 * max_cycles < (2^63)/cs->mult
-	 * max_cycles < 2^(log2((2^63)/cs->mult))
-	 * max_cycles < 2^(log2(2^63) - log2(cs->mult))
-	 * max_cycles < 2^(63 - log2(cs->mult))
-	 * max_cycles < 1 << (63 - log2(cs->mult))
+	 * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
+	 * which is equivalent to the below.
+	 * max_cycles < (2^63)/(cs->mult + cs->maxadj)
+	 * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
+	 * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
+	 * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
+	 * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
 	 * Please note that we add 1 to the result of the log2 to account for
 	 * any rounding errors, ensure the above inequality is satisfied and
 	 * no overflow will occur.
 	 */
-	max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1));
+	max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
 
 	/*
 	 * The actual maximum number of cycles we can defer the clocksource is
 	 * determined by the minimum of max_cycles and cs->mask.
+	 * Note: Here we subtract the maxadj to make sure we don't sleep for
+	 * too long if there's a large negative adjustment.
 	 */
 	max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
-	max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift);
+	max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
+					cs->shift);
 
 	/*
 	 * To ensure that the clocksource does not wrap whilst we are idle,
@@ -529,7 +548,7 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
 	 * note a margin of 12.5% is used because this can be computed with
 	 * a shift, versus say 10% which would require division.
 	 */
-	return max_nsecs - (max_nsecs >> 5);
+	return max_nsecs - (max_nsecs >> 3);
 }
 
 #ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
@@ -628,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs)
 
 /**
  * __clocksource_updatefreq_scale - Used update clocksource with new freq
- * @t:		clocksource to be registered
+ * @cs:		clocksource to be registered
  * @scale:	Scale factor multiplied against freq to get clocksource hz
  * @freq:	clocksource frequency (cycles per second) divided by scale
  *
@@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs)
 void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 {
 	u64 sec;
-
 	/*
 	 * Calc the maximum number of seconds which we can run before
 	 * wrapping around. For clocksources which have a mask > 32bit
@@ -651,7 +669,7 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 	 * ~ 0.06ppm granularity for NTP. We apply the same 12.5%
 	 * margin as we do in clocksource_max_deferment()
 	 */
-	sec = (cs->mask - (cs->mask >> 5));
+	sec = (cs->mask - (cs->mask >> 3));
 	do_div(sec, freq);
 	do_div(sec, scale);
 	if (!sec)
@@ -661,13 +679,27 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
 
 	clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
 			       NSEC_PER_SEC / scale, sec * scale);
+
+	/*
+	 * for clocksources that have large mults, to avoid overflow.
+	 * Since mult may be adjusted by ntp, add an safety extra margin
+	 *
+	 */
+	cs->maxadj = clocksource_max_adjustment(cs);
+	while ((cs->mult + cs->maxadj < cs->mult)
+		|| (cs->mult - cs->maxadj > cs->mult)) {
+		cs->mult >>= 1;
+		cs->shift--;
+		cs->maxadj = clocksource_max_adjustment(cs);
+	}
+
 	cs->max_idle_ns = clocksource_max_deferment(cs);
 }
 EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
 
 /**
  * __clocksource_register_scale - Used to install new clocksources
- * @t:		clocksource to be registered
+ * @cs:		clocksource to be registered
  * @scale:	Scale factor multiplied against freq to get clocksource hz
  * @freq:	clocksource frequency (cycles per second) divided by scale
  *
@@ -695,12 +727,18 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
 
 /**
  * clocksource_register - Used to install new clocksources
- * @t:		clocksource to be registered
+ * @cs:		clocksource to be registered
  *
  * Returns -EBUSY if registration fails, zero otherwise.
  */
 int clocksource_register(struct clocksource *cs)
 {
+	/* calculate max adjustment for given mult/shift */
+	cs->maxadj = clocksource_max_adjustment(cs);
+	WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
+		"Clocksource %s might overflow on 11%% adjustment\n",
+		cs->name);
+
 	/* calculate max idle time permitted for this clocksource */
 	cs->max_idle_ns = clocksource_max_deferment(cs);
 
@@ -723,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating)
 
 /**
  * clocksource_change_rating - Change the rating of a registered clocksource
+ * @cs:		clocksource to be changed
+ * @rating:	new rating
  */
 void clocksource_change_rating(struct clocksource *cs, int rating)
 {
@@ -734,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating);
 
 /**
  * clocksource_unregister - remove a registered clocksource
+ * @cs:	clocksource to be unregistered
  */
 void clocksource_unregister(struct clocksource *cs)
 {
@@ -749,13 +790,14 @@ EXPORT_SYMBOL(clocksource_unregister);
 /**
  * sysfs_show_current_clocksources - sysfs interface for current clocksource
  * @dev:	unused
+ * @attr:	unused
  * @buf:	char buffer to be filled with clocksource list
  *
  * Provides sysfs interface for listing current clocksource.
  */
 static ssize_t
-sysfs_show_current_clocksources(struct sys_device *dev,
-				struct sysdev_attribute *attr, char *buf)
+sysfs_show_current_clocksources(struct device *dev,
+				struct device_attribute *attr, char *buf)
 {
 	ssize_t count = 0;
 
@@ -769,14 +811,15 @@ sysfs_show_current_clocksources(struct sys_device *dev,
 /**
  * sysfs_override_clocksource - interface for manually overriding clocksource
  * @dev:	unused
+ * @attr:	unused
  * @buf:	name of override clocksource
  * @count:	length of buffer
  *
  * Takes input from sysfs interface for manually overriding the default
  * clocksource selection.
  */
-static ssize_t sysfs_override_clocksource(struct sys_device *dev,
-					  struct sysdev_attribute *attr,
+static ssize_t sysfs_override_clocksource(struct device *dev,
+					  struct device_attribute *attr,
 					  const char *buf, size_t count)
 {
 	size_t ret = count;
@@ -804,13 +847,14 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev,
 /**
  * sysfs_show_available_clocksources - sysfs interface for listing clocksource
  * @dev:	unused
+ * @attr:	unused
  * @buf:	char buffer to be filled with clocksource list
  *
  * Provides sysfs interface for listing registered clocksources
  */
 static ssize_t
-sysfs_show_available_clocksources(struct sys_device *dev,
-				  struct sysdev_attribute *attr,
+sysfs_show_available_clocksources(struct device *dev,
+				  struct device_attribute *attr,
 				  char *buf)
 {
 	struct clocksource *src;
@@ -839,35 +883,36 @@ sysfs_show_available_clocksources(struct sys_device *dev,
 /*
  * Sysfs setup bits:
  */
-static SYSDEV_ATTR(current_clocksource, 0644, sysfs_show_current_clocksources,
+static DEVICE_ATTR(current_clocksource, 0644, sysfs_show_current_clocksources,
 		   sysfs_override_clocksource);
 
-static SYSDEV_ATTR(available_clocksource, 0444,
+static DEVICE_ATTR(available_clocksource, 0444,
 		   sysfs_show_available_clocksources, NULL);
 
-static struct sysdev_class clocksource_sysclass = {
+static struct bus_type clocksource_subsys = {
 	.name = "clocksource",
+	.dev_name = "clocksource",
 };
 
-static struct sys_device device_clocksource = {
+static struct device device_clocksource = {
 	.id	= 0,
-	.cls	= &clocksource_sysclass,
+	.bus	= &clocksource_subsys,
 };
 
 static int __init init_clocksource_sysfs(void)
 {
-	int error = sysdev_class_register(&clocksource_sysclass);
+	int error = subsys_system_register(&clocksource_subsys, NULL);
 
 	if (!error)
-		error = sysdev_register(&device_clocksource);
+		error = device_register(&device_clocksource);
 	if (!error)
-		error = sysdev_create_file(
+		error = device_create_file(
 				&device_clocksource,
-				&attr_current_clocksource);
+				&dev_attr_current_clocksource);
 	if (!error)
-		error = sysdev_create_file(
+		error = device_create_file(
 				&device_clocksource,
-				&attr_available_clocksource);
+				&dev_attr_available_clocksource);
 	return error;
 }
 
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index f954282..fd4a7b1 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -71,7 +71,7 @@ int tick_check_broadcast_device(struct clock_event_device *dev)
 	     (dev->features & CLOCK_EVT_FEAT_C3STOP))
 		return 0;
 
-	clockevents_exchange_device(NULL, dev);
+	clockevents_exchange_device(tick_broadcast_device.evtdev, dev);
 	tick_broadcast_device.evtdev = dev;
 	if (!cpumask_empty(tick_get_broadcast_mask()))
 		tick_broadcast_start_periodic(dev);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 4042064..7656642 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -275,42 +275,17 @@ u64 get_cpu_iowait_time_us(int cpu, u64 *last_update_time)
 }
 EXPORT_SYMBOL_GPL(get_cpu_iowait_time_us);
 
-/**
- * tick_nohz_stop_sched_tick - stop the idle tick from the idle task
- *
- * When the next event is more than a tick into the future, stop the idle tick
- * Called either from the idle loop or from irq_exit() when an idle period was
- * just interrupted by an interrupt which did not cause a reschedule.
- */
-void tick_nohz_stop_sched_tick(int inidle)
+static void tick_nohz_stop_sched_tick(struct tick_sched *ts)
 {
-	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies, flags;
-	struct tick_sched *ts;
+	unsigned long seq, last_jiffies, next_jiffies, delta_jiffies;
 	ktime_t last_update, expires, now;
 	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
 	u64 time_delta;
 	int cpu;
 
-	local_irq_save(flags);
-
 	cpu = smp_processor_id();
 	ts = &per_cpu(tick_cpu_sched, cpu);
 
-	/*
-	 * Call to tick_nohz_start_idle stops the last_update_time from being
-	 * updated. Thus, it must not be called in the event we are called from
-	 * irq_exit() with the prior state different than idle.
-	 */
-	if (!inidle && !ts->inidle)
-		goto end;
-
-	/*
-	 * Set ts->inidle unconditionally. Even if the system did not
-	 * switch to NOHZ mode the cpu frequency governers rely on the
-	 * update of the idle time accounting in tick_nohz_start_idle().
-	 */
-	ts->inidle = 1;
-
 	now = tick_nohz_start_idle(cpu, ts);
 
 	/*
@@ -326,10 +301,10 @@ void tick_nohz_stop_sched_tick(int inidle)
 	}
 
 	if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
-		goto end;
+		return;
 
 	if (need_resched())
-		goto end;
+		return;
 
 	if (unlikely(local_softirq_pending() && cpu_online(cpu))) {
 		static int ratelimit;
@@ -339,7 +314,7 @@ void tick_nohz_stop_sched_tick(int inidle)
 			       (unsigned int) local_softirq_pending());
 			ratelimit++;
 		}
-		goto end;
+		return;
 	}
 
 	ts->idle_calls++;
@@ -434,7 +409,6 @@ void tick_nohz_stop_sched_tick(int inidle)
 			ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
 			ts->tick_stopped = 1;
 			ts->idle_jiffies = last_jiffies;
-			rcu_enter_nohz();
 		}
 
 		ts->idle_sleeps++;
@@ -472,8 +446,64 @@ out:
 	ts->next_jiffies = next_jiffies;
 	ts->last_jiffies = last_jiffies;
 	ts->sleep_length = ktime_sub(dev->next_event, now);
-end:
-	local_irq_restore(flags);
+}
+
+/**
+ * tick_nohz_idle_enter - stop the idle tick from the idle task
+ *
+ * When the next event is more than a tick into the future, stop the idle tick
+ * Called when we start the idle loop.
+ *
+ * The arch is responsible of calling:
+ *
+ * - rcu_idle_enter() after its last use of RCU before the CPU is put
+ *  to sleep.
+ * - rcu_idle_exit() before the first use of RCU after the CPU is woken up.
+ */
+void tick_nohz_idle_enter(void)
+{
+	struct tick_sched *ts;
+
+	WARN_ON_ONCE(irqs_disabled());
+
+	/*
+ 	 * Update the idle state in the scheduler domain hierarchy
+ 	 * when tick_nohz_stop_sched_tick() is called from the idle loop.
+ 	 * State will be updated to busy during the first busy tick after
+ 	 * exiting idle.
+ 	 */
+	set_cpu_sd_state_idle();
+
+	local_irq_disable();
+
+	ts = &__get_cpu_var(tick_cpu_sched);
+	/*
+	 * set ts->inidle unconditionally. even if the system did not
+	 * switch to nohz mode the cpu frequency governers rely on the
+	 * update of the idle time accounting in tick_nohz_start_idle().
+	 */
+	ts->inidle = 1;
+	tick_nohz_stop_sched_tick(ts);
+
+	local_irq_enable();
+}
+
+/**
+ * tick_nohz_irq_exit - update next tick event from interrupt exit
+ *
+ * When an interrupt fires while we are idle and it doesn't cause
+ * a reschedule, it may still add, modify or delete a timer, enqueue
+ * an RCU callback, etc...
+ * So we need to re-calculate and reprogram the next tick event.
+ */
+void tick_nohz_irq_exit(void)
+{
+	struct tick_sched *ts = &__get_cpu_var(tick_cpu_sched);
+
+	if (!ts->inidle)
+		return;
+
+	tick_nohz_stop_sched_tick(ts);
 }
 
 /**
@@ -515,11 +545,13 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now)
 }
 
 /**
- * tick_nohz_restart_sched_tick - restart the idle tick from the idle task
+ * tick_nohz_idle_exit - restart the idle tick from the idle task
  *
  * Restart the idle tick when the CPU is woken up from idle
+ * This also exit the RCU extended quiescent state. The CPU
+ * can use RCU again after this function is called.
  */
-void tick_nohz_restart_sched_tick(void)
+void tick_nohz_idle_exit(void)
 {
 	int cpu = smp_processor_id();
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
@@ -529,6 +561,7 @@ void tick_nohz_restart_sched_tick(void)
 	ktime_t now;
 
 	local_irq_disable();
+
 	if (ts->idle_active || (ts->inidle && ts->tick_stopped))
 		now = ktime_get();
 
@@ -543,8 +576,6 @@ void tick_nohz_restart_sched_tick(void)
 
 	ts->inidle = 0;
 
-	rcu_exit_nohz();
-
 	/* Update jiffies first */
 	select_nohz_load_balancer(0);
 	tick_do_update_jiffies64(now);
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 1694799..e6a5a6bc 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -131,7 +131,7 @@ static inline s64 timekeeping_get_ns_raw(void)
 	/* calculate the delta since the last update_wall_time: */
 	cycle_delta = (cycle_now - clock->cycle_last) & clock->mask;
 
-	/* return delta convert to nanoseconds using ntp adjusted mult. */
+	/* return delta convert to nanoseconds. */
 	return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
 }
 
@@ -249,6 +249,8 @@ ktime_t ktime_get(void)
 		secs = xtime.tv_sec + wall_to_monotonic.tv_sec;
 		nsecs = xtime.tv_nsec + wall_to_monotonic.tv_nsec;
 		nsecs += timekeeping_get_ns();
+		/* If arch requires, add in gettimeoffset() */
+		nsecs += arch_gettimeoffset();
 
 	} while (read_seqretry(&xtime_lock, seq));
 	/*
@@ -280,6 +282,8 @@ void ktime_get_ts(struct timespec *ts)
 		*ts = xtime;
 		tomono = wall_to_monotonic;
 		nsecs = timekeeping_get_ns();
+		/* If arch requires, add in gettimeoffset() */
+		nsecs += arch_gettimeoffset();
 
 	} while (read_seqretry(&xtime_lock, seq));
 
@@ -802,14 +806,44 @@ static void timekeeping_adjust(s64 offset)
 	s64 error, interval = timekeeper.cycle_interval;
 	int adj;
 
+	/*
+	 * The point of this is to check if the error is greater then half
+	 * an interval.
+	 *
+	 * First we shift it down from NTP_SHIFT to clocksource->shifted nsecs.
+	 *
+	 * Note we subtract one in the shift, so that error is really error*2.
+	 * This "saves" dividing(shifting) interval twice, but keeps the
+	 * (error > interval) comparison as still measuring if error is
+	 * larger then half an interval.
+	 *
+	 * Note: It does not "save" on aggravation when reading the code.
+	 */
 	error = timekeeper.ntp_error >> (timekeeper.ntp_error_shift - 1);
 	if (error > interval) {
+		/*
+		 * We now divide error by 4(via shift), which checks if
+		 * the error is greater then twice the interval.
+		 * If it is greater, we need a bigadjust, if its smaller,
+		 * we can adjust by 1.
+		 */
 		error >>= 2;
+		/*
+		 * XXX - In update_wall_time, we round up to the next
+		 * nanosecond, and store the amount rounded up into
+		 * the error. This causes the likely below to be unlikely.
+		 *
+		 * The proper fix is to avoid rounding up by using
+		 * the high precision timekeeper.xtime_nsec instead of
+		 * xtime.tv_nsec everywhere. Fixing this will take some
+		 * time.
+		 */
 		if (likely(error <= interval))
 			adj = 1;
 		else
 			adj = timekeeping_bigadjust(error, &interval, &offset);
 	} else if (error < -interval) {
+		/* See comment above, this is just switched for the negative */
 		error >>= 2;
 		if (likely(error >= -interval)) {
 			adj = -1;
@@ -817,9 +851,65 @@ static void timekeeping_adjust(s64 offset)
 			offset = -offset;
 		} else
 			adj = timekeeping_bigadjust(error, &interval, &offset);
-	} else
+	} else /* No adjustment needed */
 		return;
 
+	WARN_ONCE(timekeeper.clock->maxadj &&
+			(timekeeper.mult + adj > timekeeper.clock->mult +
+						timekeeper.clock->maxadj),
+			"Adjusting %s more then 11%% (%ld vs %ld)\n",
+			timekeeper.clock->name, (long)timekeeper.mult + adj,
+			(long)timekeeper.clock->mult +
+				timekeeper.clock->maxadj);
+	/*
+	 * So the following can be confusing.
+	 *
+	 * To keep things simple, lets assume adj == 1 for now.
+	 *
+	 * When adj != 1, remember that the interval and offset values
+	 * have been appropriately scaled so the math is the same.
+	 *
+	 * The basic idea here is that we're increasing the multiplier
+	 * by one, this causes the xtime_interval to be incremented by
+	 * one cycle_interval. This is because:
+	 *	xtime_interval = cycle_interval * mult
+	 * So if mult is being incremented by one:
+	 *	xtime_interval = cycle_interval * (mult + 1)
+	 * Its the same as:
+	 *	xtime_interval = (cycle_interval * mult) + cycle_interval
+	 * Which can be shortened to:
+	 *	xtime_interval += cycle_interval
+	 *
+	 * So offset stores the non-accumulated cycles. Thus the current
+	 * time (in shifted nanoseconds) is:
+	 *	now = (offset * adj) + xtime_nsec
+	 * Now, even though we're adjusting the clock frequency, we have
+	 * to keep time consistent. In other words, we can't jump back
+	 * in time, and we also want to avoid jumping forward in time.
+	 *
+	 * So given the same offset value, we need the time to be the same
+	 * both before and after the freq adjustment.
+	 *	now = (offset * adj_1) + xtime_nsec_1
+	 *	now = (offset * adj_2) + xtime_nsec_2
+	 * So:
+	 *	(offset * adj_1) + xtime_nsec_1 =
+	 *		(offset * adj_2) + xtime_nsec_2
+	 * And we know:
+	 *	adj_2 = adj_1 + 1
+	 * So:
+	 *	(offset * adj_1) + xtime_nsec_1 =
+	 *		(offset * (adj_1+1)) + xtime_nsec_2
+	 *	(offset * adj_1) + xtime_nsec_1 =
+	 *		(offset * adj_1) + offset + xtime_nsec_2
+	 * Canceling the sides:
+	 *	xtime_nsec_1 = offset + xtime_nsec_2
+	 * Which gives us:
+	 *	xtime_nsec_2 = xtime_nsec_1 - offset
+	 * Which simplfies to:
+	 *	xtime_nsec -= offset
+	 *
+	 * XXX - TODO: Doc ntp_error calculation.
+	 */
 	timekeeper.mult += adj;
 	timekeeper.xtime_interval += interval;
 	timekeeper.xtime_nsec -= offset;