[PATCH] NTP: Move all the NTP related code to ntp.c

Move all the NTP related code to ntp.c

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 173 deletions

diff --git a/kernel/time.c b/kernel/time.c
index 5bd4897..0e017bff 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -202,179 +202,6 @@ asmlinkage long sys_settimeofday(struct timeval __user *tv,
 	return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
 }
 
-/* we call this to notify the arch when the clock is being
- * controlled.  If no such arch routine, do nothing.
- */
-void __attribute__ ((weak)) notify_arch_cmos_timer(void)
-{
-	return;
-}
-
-/* adjtimex mainly allows reading (and writing, if superuser) of
- * kernel time-keeping variables. used by xntpd.
- */
-int do_adjtimex(struct timex *txc)
-{
-        long ltemp, mtemp, save_adjust;
-	int result;
-
-	/* In order to modify anything, you gotta be super-user! */
-	if (txc->modes && !capable(CAP_SYS_TIME))
-		return -EPERM;
-		
-	/* Now we validate the data before disabling interrupts */
-
-	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
-	  /* singleshot must not be used with any other mode bits */
-		if (txc->modes != ADJ_OFFSET_SINGLESHOT)
-			return -EINVAL;
-
-	if (txc->modes != ADJ_OFFSET_SINGLESHOT && (txc->modes & ADJ_OFFSET))
-	  /* adjustment Offset limited to +- .512 seconds */
-		if (txc->offset <= - MAXPHASE || txc->offset >= MAXPHASE )
-			return -EINVAL;	
-
-	/* if the quartz is off by more than 10% something is VERY wrong ! */
-	if (txc->modes & ADJ_TICK)
-		if (txc->tick <  900000/USER_HZ ||
-		    txc->tick > 1100000/USER_HZ)
-			return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	result = time_state;	/* mostly `TIME_OK' */
-
-	/* Save for later - semantics of adjtime is to return old value */
-	save_adjust = time_next_adjust ? time_next_adjust : time_adjust;
-
-#if 0	/* STA_CLOCKERR is never set yet */
-	time_status &= ~STA_CLOCKERR;		/* reset STA_CLOCKERR */
-#endif
-	/* If there are input parameters, then process them */
-	if (txc->modes)
-	{
-	    if (txc->modes & ADJ_STATUS)	/* only set allowed bits */
-		time_status =  (txc->status & ~STA_RONLY) |
-			      (time_status & STA_RONLY);
-
-	    if (txc->modes & ADJ_FREQUENCY) {	/* p. 22 */
-		if (txc->freq > MAXFREQ || txc->freq < -MAXFREQ) {
-		    result = -EINVAL;
-		    goto leave;
-		}
-		time_freq = txc->freq;
-	    }
-
-	    if (txc->modes & ADJ_MAXERROR) {
-		if (txc->maxerror < 0 || txc->maxerror >= NTP_PHASE_LIMIT) {
-		    result = -EINVAL;
-		    goto leave;
-		}
-		time_maxerror = txc->maxerror;
-	    }
-
-	    if (txc->modes & ADJ_ESTERROR) {
-		if (txc->esterror < 0 || txc->esterror >= NTP_PHASE_LIMIT) {
-		    result = -EINVAL;
-		    goto leave;
-		}
-		time_esterror = txc->esterror;
-	    }
-
-	    if (txc->modes & ADJ_TIMECONST) {	/* p. 24 */
-		if (txc->constant < 0) {	/* NTP v4 uses values > 6 */
-		    result = -EINVAL;
-		    goto leave;
-		}
-		time_constant = txc->constant;
-	    }
-
-	    if (txc->modes & ADJ_OFFSET) {	/* values checked earlier */
-		if (txc->modes == ADJ_OFFSET_SINGLESHOT) {
-		    /* adjtime() is independent from ntp_adjtime() */
-		    if ((time_next_adjust = txc->offset) == 0)
-			 time_adjust = 0;
-		}
-		else if (time_status & STA_PLL) {
-		    ltemp = txc->offset;
-
-		    /*
-		     * Scale the phase adjustment and
-		     * clamp to the operating range.
-		     */
-		    if (ltemp > MAXPHASE)
-		        time_offset = MAXPHASE << SHIFT_UPDATE;
-		    else if (ltemp < -MAXPHASE)
-			time_offset = -(MAXPHASE << SHIFT_UPDATE);
-		    else
-		        time_offset = ltemp << SHIFT_UPDATE;
-
-		    /*
-		     * Select whether the frequency is to be controlled
-		     * and in which mode (PLL or FLL). Clamp to the operating
-		     * range. Ugly multiply/divide should be replaced someday.
-		     */
-
-		    if (time_status & STA_FREQHOLD || time_reftime == 0)
-		        time_reftime = xtime.tv_sec;
-		    mtemp = xtime.tv_sec - time_reftime;
-		    time_reftime = xtime.tv_sec;
-		    if (time_status & STA_FLL) {
-		        if (mtemp >= MINSEC) {
-			    ltemp = (time_offset / mtemp) << (SHIFT_USEC -
-							      SHIFT_UPDATE);
-			    time_freq += shift_right(ltemp, SHIFT_KH);
-			} else /* calibration interval too short (p. 12) */
-				result = TIME_ERROR;
-		    } else {	/* PLL mode */
-		        if (mtemp < MAXSEC) {
-			    ltemp *= mtemp;
-			    time_freq += shift_right(ltemp,(time_constant +
-						       time_constant +
-						       SHIFT_KF - SHIFT_USEC));
-			} else /* calibration interval too long (p. 12) */
-				result = TIME_ERROR;
-		    }
-		    time_freq = min(time_freq, time_tolerance);
-		    time_freq = max(time_freq, -time_tolerance);
-		} /* STA_PLL */
-	    } /* txc->modes & ADJ_OFFSET */
-	    if (txc->modes & ADJ_TICK) {
-		tick_usec = txc->tick;
-		tick_nsec = TICK_USEC_TO_NSEC(tick_usec);
-	    }
-	} /* txc->modes */
-leave:	if ((time_status & (STA_UNSYNC|STA_CLOCKERR)) != 0)
-		result = TIME_ERROR;
-	
-	if ((txc->modes & ADJ_OFFSET_SINGLESHOT) == ADJ_OFFSET_SINGLESHOT)
-	    txc->offset	   = save_adjust;
-	else {
-	    txc->offset = shift_right(time_offset, SHIFT_UPDATE);
-	}
-	txc->freq	   = time_freq;
-	txc->maxerror	   = time_maxerror;
-	txc->esterror	   = time_esterror;
-	txc->status	   = time_status;
-	txc->constant	   = time_constant;
-	txc->precision	   = time_precision;
-	txc->tolerance	   = time_tolerance;
-	txc->tick	   = tick_usec;
-
-	/* PPS is not implemented, so these are zero */
-	txc->ppsfreq	   = 0;
-	txc->jitter	   = 0;
-	txc->shift	   = 0;
-	txc->stabil	   = 0;
-	txc->jitcnt	   = 0;
-	txc->calcnt	   = 0;
-	txc->errcnt	   = 0;
-	txc->stbcnt	   = 0;
-	write_sequnlock_irq(&xtime_lock);
-	do_gettimeofday(&txc->time);
-	notify_arch_cmos_timer();
-	return(result);
-}
-
 asmlinkage long sys_adjtimex(struct timex __user *txc_p)
 {
 	struct timex txc;		/* Local copy of parameter */