summaryrefslogtreecommitdiffstats
path: root/kernel/power/disk.c
diff options
context:
space:
mode:
authorRafael J. Wysocki <rjw@sisk.pl>2007-07-19 01:47:30 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-07-19 10:04:42 -0700
commita634cc10164d1c229fbeca33923e6a0ed939e894 (patch)
treea2cdc5403127ca71b2cf378feb86d46745022ac1 /kernel/power/disk.c
parent7777fab989b5d006903188c966058ebcd2d6342a (diff)
downloadop-kernel-dev-a634cc10164d1c229fbeca33923e6a0ed939e894.zip
op-kernel-dev-a634cc10164d1c229fbeca33923e6a0ed939e894.tar.gz
swsusp: introduce restore platform operations
At least on some machines it is necessary to prepare the ACPI firmware for the restoration of the system memory state from the hibernation image if the "platform" mode of hibernation has been used. Namely, in that cases we need to disable the GPEs before replacing the "boot" kernel with the "frozen" kernel (cf. http://bugzilla.kernel.org/show_bug.cgi?id=7887). After the restore they will be re-enabled by hibernation_ops->finish(), but if the restore fails, they have to be re-enabled by the restore code explicitly. For this purpose we can introduce two additional hibernation operations, called pre_restore() and restore_cleanup() and call them from the restore code path. Still, they should be called if the "platform" mode of hibernation has been used, so we need to pass the information about the hibernation mode from the "frozen" kernel to the "boot" kernel in the image header. Apparently, we can't drop the disabling of GPEs before the restore because of Bug #7887 .  We also can't do it unconditionally, because the GPEs wouldn't have been enabled after a successful restore if the suspend had been done in the 'shutdown' or 'reboot' mode. In principle we could (and probably should) unconditionally disable the GPEs before each snapshot creation *and* before the restore, but then we'd have to unconditionally enable them after the snapshot creation as well as after the restore (or restore failure)   Still, for this purpose we'd need to modify acpi_enter_sleep_state_prep() and acpi_leave_sleep_state() and we'd have to introduce some mechanism synchronizing the disablind/enabling of the GPEs with the device drivers' .suspend()/.resume() routines and with disable_/enable_nonboot_cpus().  However, this would have affected the suspend (ie. s2ram) code as well as the hibernation, which I'd like to avoid in this patch series. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'kernel/power/disk.c')
-rw-r--r--kernel/power/disk.c56
1 files changed, 46 insertions, 10 deletions
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index 47882bf..fa3b43b 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -54,7 +54,8 @@ static struct hibernation_ops *hibernation_ops;
void hibernation_set_ops(struct hibernation_ops *ops)
{
- if (ops && !(ops->prepare && ops->enter && ops->finish)) {
+ if (ops && !(ops->prepare && ops->enter && ops->finish
+ && ops->pre_restore && ops->restore_cleanup)) {
WARN_ON(1);
return;
}
@@ -92,6 +93,31 @@ static void platform_finish(int platform_mode)
}
/**
+ * platform_pre_restore - prepare the platform for the restoration from a
+ * hibernation image. If the restore fails after this function has been
+ * called, platform_restore_cleanup() must be called.
+ */
+
+static int platform_pre_restore(int platform_mode)
+{
+ return (platform_mode && hibernation_ops) ?
+ hibernation_ops->pre_restore() : 0;
+}
+
+/**
+ * platform_restore_cleanup - switch the platform to the normal mode of
+ * operation after a failing restore. If platform_pre_restore() has been
+ * called before the failing restore, this function must be called too,
+ * regardless of the result of platform_pre_restore().
+ */
+
+static void platform_restore_cleanup(int platform_mode)
+{
+ if (platform_mode && hibernation_ops)
+ hibernation_ops->restore_cleanup();
+}
+
+/**
* hibernation_snapshot - quiesce devices and create the hibernation
* snapshot image.
* @platform_mode - if set, use the platform driver, if available, to
@@ -141,11 +167,13 @@ int hibernation_snapshot(int platform_mode)
/**
* hibernation_restore - quiesce devices and restore the hibernation
* snapshot image. If successful, control returns in hibernation_snaphot()
+ * @platform_mode - if set, use the platform driver, if available, to
+ * prepare the platform frimware for the transition.
*
* Must be called with pm_mutex held
*/
-int hibernation_restore(void)
+int hibernation_restore(int platform_mode)
{
int error;
@@ -155,11 +183,14 @@ int hibernation_restore(void)
if (error)
goto Finish;
- error = disable_nonboot_cpus();
- if (!error)
- error = swsusp_resume();
-
- enable_nonboot_cpus();
+ error = platform_pre_restore(platform_mode);
+ if (!error) {
+ error = disable_nonboot_cpus();
+ if (!error)
+ error = swsusp_resume();
+ enable_nonboot_cpus();
+ }
+ platform_restore_cleanup(platform_mode);
Finish:
device_resume();
resume_console();
@@ -260,8 +291,12 @@ int hibernate(void)
}
error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM);
if (in_suspend && !error) {
+ unsigned int flags = 0;
+
+ if (hibernation_mode == HIBERNATION_PLATFORM)
+ flags |= SF_PLATFORM_MODE;
pr_debug("PM: writing image.\n");
- error = swsusp_write();
+ error = swsusp_write(flags);
swsusp_free();
if (!error)
power_down();
@@ -295,6 +330,7 @@ int hibernate(void)
static int software_resume(void)
{
int error;
+ unsigned int flags;
mutex_lock(&pm_mutex);
if (!swsusp_resume_device) {
@@ -342,9 +378,9 @@ static int software_resume(void)
pr_debug("PM: Reading swsusp image.\n");
- error = swsusp_read();
+ error = swsusp_read(&flags);
if (!error)
- hibernation_restore();
+ hibernation_restore(flags & SF_PLATFORM_MODE);
printk(KERN_ERR "PM: Restore failed, recovering.\n");
swsusp_free();
OpenPOWER on IntegriCloud