Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core timer updates from Ingo Molnar:
 "The main changes in this cycle's merge are:

   - Implement shadow timekeeper to shorten in kernel reader side
     blocking, by Thomas Gleixner.

   - Posix timers enhancements by Pavel Emelyanov:

   - allocate timer ID per process, so that exact timer ID allocations
     can be re-created be checkpoint/restore code.

   - debuggability and tooling (/proc/PID/timers, etc.) improvements.

   - suspend/resume enhancements by Feng Tang: on certain new Intel Atom
     processors (Penwell and Cloverview), there is a feature that the
     TSC won't stop in S3 state, so the TSC value won't be reset to 0
     after resume.  This can be taken advantage of by the generic via
     the CLOCK_SOURCE_SUSPEND_NONSTOP flag: instead of using the RTC to
     recover/approximate sleep time, the main (and precise) clocksource
     can be used.

   - Fix /proc/timer_list for 4096 CPUs by Nathan Zimmer: on so many
     CPUs the file goes beyond 4MB of size and thus the current
     simplistic seqfile approach fails.  Convert /proc/timer_list to a
     proper seq_file with its own iterator.

   - Cleanups and refactorings of the core timekeeping code by John
     Stultz.

   - International Atomic Clock time is managed by the NTP code
     internally currently but not exposed externally.  Separate the TAI
     code out and add CLOCK_TAI support and TAI support to the hrtimer
     and posix-timer code, by John Stultz.

   - Add deep idle support enhacement to the broadcast clockevents core
     timer code, by Daniel Lezcano: add an opt-in CLOCK_EVT_FEAT_DYNIRQ
     clockevents feature (which will be utilized by future clockevents
     driver updates), which allows the use of IRQ affinities to avoid
     spurious wakeups of idle CPUs - the right CPU with an expiring
     timer will be woken.

   - Add new ARM bcm281xx clocksource driver, by Christian Daudt

   - ... various other fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  clockevents: Set dummy handler on CPU_DEAD shutdown
  timekeeping: Update tk->cycle_last in resume
  posix-timers: Remove unused variable
  clockevents: Switch into oneshot mode even if broadcast registered late
  timer_list: Convert timer list to be a proper seq_file
  timer_list: Split timer_list_show_tickdevices
  posix-timers: Show sigevent info in proc file
  posix-timers: Introduce /proc/PID/timers file
  posix timers: Allocate timer id per process (v2)
  timekeeping: Make sure to notify hrtimers when TAI offset changes
  hrtimer: Fix ktime_add_ns() overflow on 32bit architectures
  hrtimer: Add expiry time overflow check in hrtimer_interrupt
  timekeeping: Shorten seq_count region
  timekeeping: Implement a shadow timekeeper
  timekeeping: Delay update of clock->cycle_last
  timekeeping: Store cycle_last value in timekeeper struct as well
  ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state
  timekeeping: Simplify tai updating from do_adjtimex
  timekeeping: Hold timekeepering locks in do_adjtimex and hardpps
  timekeeping: Move ADJ_SETOFFSET to top level do_adjtimex()
  ...

1 files changed, 23 insertions, 3 deletions

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 14be27f..609d8ff 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -84,6 +84,12 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
 			.get_time = &ktime_get_boottime,
 			.resolution = KTIME_LOW_RES,
 		},
+		{
+			.index = HRTIMER_BASE_TAI,
+			.clockid = CLOCK_TAI,
+			.get_time = &ktime_get_clocktai,
+			.resolution = KTIME_LOW_RES,
+		},
 	}
 };
 
@@ -91,6 +97,7 @@ static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
 	[CLOCK_REALTIME]	= HRTIMER_BASE_REALTIME,
 	[CLOCK_MONOTONIC]	= HRTIMER_BASE_MONOTONIC,
 	[CLOCK_BOOTTIME]	= HRTIMER_BASE_BOOTTIME,
+	[CLOCK_TAI]		= HRTIMER_BASE_TAI,
 };
 
 static inline int hrtimer_clockid_to_base(clockid_t clock_id)
@@ -107,8 +114,10 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 {
 	ktime_t xtim, mono, boot;
 	struct timespec xts, tom, slp;
+	s32 tai_offset;
 
 	get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
+	tai_offset = timekeeping_get_tai_offset();
 
 	xtim = timespec_to_ktime(xts);
 	mono = ktime_add(xtim, timespec_to_ktime(tom));
@@ -116,6 +125,8 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 	base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
 	base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
 	base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
+	base->clock_base[HRTIMER_BASE_TAI].softirq_time =
+				ktime_add(xtim,	ktime_set(tai_offset, 0));
 }
 
 /*
@@ -276,6 +287,10 @@ ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
 	} else {
 		unsigned long rem = do_div(nsec, NSEC_PER_SEC);
 
+		/* Make sure nsec fits into long */
+		if (unlikely(nsec > KTIME_SEC_MAX))
+			return (ktime_t){ .tv64 = KTIME_MAX };
+
 		tmp = ktime_set((long)nsec, rem);
 	}
 
@@ -652,8 +667,9 @@ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
 {
 	ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
 	ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
+	ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
 
-	return ktime_get_update_offsets(offs_real, offs_boot);
+	return ktime_get_update_offsets(offs_real, offs_boot, offs_tai);
 }
 
 /*
@@ -1011,7 +1027,8 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
  * @timer:	the timer to be added
  * @tim:	expiry time
  * @delta_ns:	"slack" range for the timer
- * @mode:	expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
+ * @mode:	expiry mode: absolute (HRTIMER_MODE_ABS) or
+ *		relative (HRTIMER_MODE_REL)
  *
  * Returns:
  *  0 on success
@@ -1028,7 +1045,8 @@ EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
  * hrtimer_start - (re)start an hrtimer on the current CPU
  * @timer:	the timer to be added
  * @tim:	expiry time
- * @mode:	expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
+ * @mode:	expiry mode: absolute (HRTIMER_MODE_ABS) or
+ *		relative (HRTIMER_MODE_REL)
  *
  * Returns:
  *  0 on success
@@ -1310,6 +1328,8 @@ retry:
 
 				expires = ktime_sub(hrtimer_get_expires(timer),
 						    base->offset);
+				if (expires.tv64 < 0)
+					expires.tv64 = KTIME_MAX;
 				if (expires.tv64 < expires_next.tv64)
 					expires_next = expires;
 				break;