[PATCH] ppc32: board-specific part of fs_enet update

This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

4 files changed, 118 insertions, 29 deletions

diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index c70344b..f6a7ff0 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -1093,5 +1093,100 @@ typedef struct im_idma {
 
 #define FCC_PSMR_RMII	((uint)0x00020000)	/* Use RMII interface */
 
+/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
+ * in order to use clock-computing stuff below for the FCC x
+ */
+
+/* Automatically generates register configurations */
+#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK	((uint)0xff000000)
+
+#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK	((uint)0x00ff0000)
+
+#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK	((uint)0x0000ff00)
+
+#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
+#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
+
+#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
+
+/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL		0x00000001U
+#define PA1_CRS		0x00000002U
+#define PA1_TXER	0x00000004U
+#define PA1_TXEN	0x00000008U
+#define PA1_RXDV	0x00000010U
+#define PA1_RXER	0x00000020U
+#define PA1_TXDAT	0x00003c00U
+#define PA1_RXDAT	0x0003c000U
+#define PA1_PSORA0	(PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+		PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER	0x00000001U
+#define PB2_RXDV	0x00000002U
+#define PB2_TXEN	0x00000004U
+#define PB2_RXER	0x00000008U
+#define PB2_COL		0x00000010U
+#define PB2_CRS		0x00000020U
+#define PB2_TXDAT	0x000003c0U
+#define PB2_RXDAT	0x00003c00U
+#define PB2_PSORB0	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+		PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1	(PB2_TXEN)
+#define PB2_DIRB0	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV	0x00004000U
+#define PB3_RXER	0x00008000U
+#define PB3_TXER	0x00010000U
+#define PB3_TXEN	0x00020000U
+#define PB3_COL		0x00040000U
+#define PB3_CRS		0x00080000U
+#define PB3_TXDAT	0x0f000000U
+#define PC3_TXDAT	0x00000010U
+#define PB3_RXDAT	0x00f00000U
+#define PB3_PSORB0	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+		PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1	0
+#define PB3_DIRB0	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
+#define PC3_DIRC1	(PC3_TXDAT)
+
+/* Handy macro to specify mem for FCCs*/
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2)
+
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */
diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h
index 4b93481..23579d4 100644
--- a/include/asm-ppc/mpc8260.h
+++ b/include/asm-ppc/mpc8260.h
@@ -82,6 +82,7 @@ enum ppc_sys_devices {
 	MPC82xx_CPM_SMC2,
 	MPC82xx_CPM_USB,
 	MPC82xx_SEC1,
+	MPC82xx_MDIO_BB,
 	NUM_PPC_SYS_DEVS,
 };
 
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
index adcce33..d3a2f2f 100644
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -110,6 +110,7 @@ enum ppc_sys_devices {
 	MPC8xx_CPM_SMC1,
 	MPC8xx_CPM_SMC2,
 	MPC8xx_CPM_USB,
+	MPC8xx_MDIO_FEC,
 	NUM_PPC_SYS_DEVS,
 };
 
diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h
index 783c476..74ed35a 100644
--- a/include/linux/fs_enet_pd.h
+++ b/include/linux/fs_enet_pd.h
@@ -69,34 +69,21 @@ enum fs_ioport {
 	fsiop_porte,
 };
 
-struct fs_mii_bus_info {
-	int method;		/* mii method                  */
-	int id;			/* the id of the mii_bus       */
-	int disable_aneg;	/* if the controller needs to negothiate speed & duplex */
-	int lpa; 		/* the default board-specific vallues will be applied otherwise */
-
-	union {
-		struct {
-			int duplex;
-			int speed;
-		} fixed;
-
-		struct {
-			/* nothing */
-		} fec;
-		
-		struct {
-			/* nothing */
-		} scc;
-
-		struct {
-			int mdio_port;	/* port & bit for MDIO */
-			int mdio_bit;
-			int mdc_port;	/* port & bit for MDC  */
-			int mdc_bit;
-			int delay;	/* delay in us         */
-		} bitbang;
-	} i;
+struct fs_mii_bit {
+	u32 offset;
+	u8 bit;
+	u8 polarity;
+};
+struct fs_mii_bb_platform_info {
+	struct fs_mii_bit 	mdio_dir;
+	struct fs_mii_bit 	mdio_dat;
+	struct fs_mii_bit	mdc_dat;
+	int mdio_port;	/* port & bit for MDIO */
+	int mdio_bit;
+	int mdc_port;	/* port & bit for MDC  */
+	int mdc_bit;
+	int delay;	/* delay in us         */
+	int irq[32]; 	/* irqs per phy's */
 };
 
 struct fs_platform_info {
@@ -119,6 +106,7 @@ struct fs_platform_info {
 	u32 device_flags;
 
 	int phy_addr;		/* the phy address (-1 no phy) */
+	const char*	bus_id;
 	int phy_irq;		/* the phy irq (if it exists)  */
 
 	const struct fs_mii_bus_info *bus_info;
@@ -130,6 +118,10 @@ struct fs_platform_info {
 	int napi_weight;	/* NAPI weight                 */
 
 	int use_rmii;		/* use RMII mode 	       */
+	int has_phy;            /* if the network is phy container as well...*/
+};
+struct fs_mii_fec_platform_info {
+	u32 irq[32];
+	u32 mii_speed;
 };
-
 #endif