Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (46 commits)
  [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()
  [MTD] [NAND] CM-x270 MTD driver
  [MTD] [NAND] Wrong calculation of page number in nand_block_bad()
  [MTD] [MAPS] fix plat-ram printk format
  [JFFS2] Fix compr_rubin.c build after include file elimination.
  [JFFS2] Handle inodes with only a single metadata node with non-zero isize
  [JFFS2] Tidy up licensing/copyright boilerplate.
  [MTD] [OneNAND] Exit loop only when column start with 0
  [MTD] [OneNAND] Fix access the past of the real oobfree array
  [MTD] [OneNAND] Update Samsung OneNAND official URL
  [JFFS2] Better fix for all-zero node headers
  [JFFS2] Improve read_inode memory usage, v2.
  [JFFS2] Improve failure mode if inode checking leaves unchecked space.
  [JFFS2] Fix cross-endian build.
  [MTD] Finish conversion mtd_blkdevs to use the kthread API
  [JFFS2] Obsolete dirent nodes immediately on unlink, where possible.
  Use menuconfig objects: MTD
  [MTD] mtd_blkdevs: Convert to use the kthread API
  [MTD] Fix fwh_lock locking
  [JFFS2] Speed up mount for directly-mapped NOR flash
  ...

3 files changed, 2 insertions, 98 deletions

diff --git a/include/linux/mtd/iflash.h b/include/linux/mtd/iflash.h
deleted file mode 100644
index 9aa5b4f..0000000
--- a/include/linux/mtd/iflash.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */
-
-#ifndef __MTD_IFLASH_H__
-#define __MTD_IFLASH_H__
-
-/* Extended CIS registers for Series 2 and 2+ cards */
-/* The registers are all offsets from 0x4000 */
-#define CISREG_CSR		0x0100
-#define CISREG_WP		0x0104
-#define CISREG_RDYBSY		0x0140
-
-/* Extended CIS registers for Series 2 cards */
-#define CISREG_SLEEP		0x0118
-#define CISREG_RDY_MASK		0x0120
-#define CISREG_RDY_STATUS	0x0130
-
-/* Extended CIS registers for Series 2+ cards */
-#define CISREG_VCR		0x010c
-
-/* Card Status Register */
-#define CSR_SRESET		0x20	/* Soft reset */
-#define CSR_CMWP		0x10	/* Common memory write protect */
-#define CSR_PWRDOWN		0x08	/* Power down status */
-#define CSR_CISWP		0x04	/* Common memory CIS WP */
-#define CSR_WP			0x02	/* Mechanical write protect */
-#define CSR_READY		0x01	/* Ready/busy status */
-
-/* Write Protection Register */
-#define WP_BLKEN		0x04	/* Enable block locking */
-#define WP_CMWP			0x02	/* Common memory write protect */
-#define WP_CISWP		0x01	/* Common memory CIS WP */
-
-/* Voltage Control Register */
-#define VCR_VCC_LEVEL		0x80	/* 0 = 5V, 1 = 3.3V */
-#define VCR_VPP_VALID		0x02	/* Vpp Valid */
-#define VCR_VPP_GEN		0x01	/* Integrated Vpp generator */
-
-/* Ready/Busy Mode Register */
-#define RDYBSY_RACK		0x02	/* Ready acknowledge */
-#define RDYBSY_MODE		0x01	/* 1 = high performance */
-
-#define LOW(x) ((x) & 0xff)
-
-/* 28F008SA-Compatible Command Set */
-#define IF_READ_ARRAY		0xffff
-#define IF_INTEL_ID		0x9090
-#define IF_READ_CSR		0x7070
-#define IF_CLEAR_CSR		0x5050
-#define IF_WRITE		0x4040
-#define IF_BLOCK_ERASE		0x2020
-#define IF_ERASE_SUSPEND	0xb0b0
-#define IF_CONFIRM		0xd0d0
-
-/* 28F016SA Performance Enhancement Commands */
-#define IF_READ_PAGE		0x7575
-#define IF_PAGE_SWAP		0x7272
-#define IF_SINGLE_LOAD		0x7474
-#define IF_SEQ_LOAD		0xe0e0
-#define IF_PAGE_WRITE		0x0c0c
-#define IF_RDY_MODE		0x9696
-#define IF_RDY_LEVEL		0x0101
-#define IF_RDY_PULSE_WRITE	0x0202
-#define IF_RDY_PULSE_ERASE	0x0303
-#define IF_RDY_DISABLE		0x0404
-#define IF_LOCK_BLOCK		0x7777
-#define IF_UPLOAD_STATUS	0x9797
-#define IF_READ_ESR		0x7171
-#define IF_ERASE_UNLOCKED	0xa7a7
-#define IF_SLEEP		0xf0f0
-#define IF_ABORT		0x8080
-#define IF_UPLOAD_DEVINFO	0x9999
-
-/* Definitions for Compatible Status Register */
-#define CSR_WR_READY		0x8080	/* Write state machine status */
-#define CSR_ERA_SUSPEND		0x4040	/* Erase suspend status */
-#define CSR_ERA_ERR		0x2020	/* Erase status */
-#define CSR_WR_ERR		0x1010	/* Data write status */
-#define CSR_VPP_LOW		0x0808	/* Vpp status */
-
-/* Definitions for Global Status Register */
-#define GSR_WR_READY		0x8080	/* Write state machine status */
-#define GSR_OP_SUSPEND		0x4040	/* Operation suspend status */
-#define GSR_OP_ERR		0x2020	/* Device operation status */
-#define GSR_SLEEP		0x1010	/* Device sleep status */
-#define GSR_QUEUE_FULL		0x0808	/* Queue status */
-#define GSR_PAGE_AVAIL		0x0404	/* Page buffer available status */
-#define GSR_PAGE_READY		0x0202	/* Page buffer status */
-#define GSR_PAGE_SELECT		0x0101	/* Page buffer select status */
-
-/* Definitions for Block Status Register */
-#define BSR_READY		0x8080	/* Block status */
-#define BSR_UNLOCK		0x4040	/* Block lock status */
-#define BSR_FAILED		0x2020	/* Block operation status */
-#define BSR_ABORTED		0x1010	/* Operation abort status */
-#define BSR_QUEUE_FULL		0x0808	/* Queue status */
-#define BSR_VPP_LOW		0x0404	/* Vpp status */
-
-#endif /* __MTD_IFLASH_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 3d956c3a..45d482c 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -53,6 +53,7 @@ struct mtd_erase_region_info {
 	u_int32_t offset;			/* At which this region starts, from the beginning of the MTD */
 	u_int32_t erasesize;		/* For this region */
 	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
+	unsigned long *lockmap;		/* If keeping bitmap of locks */
 };
 
 /*
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9752388..cf197ad 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -431,6 +431,7 @@ struct nand_chip {
 #define NAND_MFR_RENESAS	0x07
 #define NAND_MFR_STMICRO	0x20
 #define NAND_MFR_HYNIX		0xad
+#define NAND_MFR_MICRON		0x2c
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure