[ARM] 3943/1: share declaration of struct pxa2xx_udc_mach_info between multiple platforms

Move declaration of struct pxa2xx_udc_mach_info from
include/asm-arm/arch-pxa/udc.h to new file
include/asm-arm/mach/udc_pxa2xx.h.

This allow us to use this structure with
multiple platforms - pxa and ixp4xx. USB
device controller used in pxa25x is the same
as controller used in ixp4xx.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 27 insertions, 16 deletions

diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
index 121cd24..646480d 100644
--- a/include/asm-arm/arch-pxa/udc.h
+++ b/include/asm-arm/arch-pxa/udc.h
@@ -4,23 +4,8 @@
  * This supports machine-specific differences in how the PXA2xx
  * USB Device Controller (UDC) is wired.
  *
- * It is set in linux/arch/arm/mach-pxa/<machine>.c and used in
- * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
  */
-struct pxa2xx_udc_mach_info {
-        int  (*udc_is_connected)(void);		/* do we see host? */
-        void (*udc_command)(int cmd);
-#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
-#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
-
-	/* Boards following the design guidelines in the developer's manual,
-	 * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
-	 * VBUS IRQ and omit the methods above.  Store the GPIO number
-	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
-	 */
-	u16	gpio_vbus;			/* high == vbus present */
-	u16	gpio_pullup;			/* high == pullup activated */
-};
+#include <asm/mach/udc_pxa2xx.h>
 
 extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
 
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
new file mode 100644
index 0000000..ff0a957
--- /dev/null
+++ b/include/asm-arm/mach/udc_pxa2xx.h
@@ -0,0 +1,26 @@
+/*
+ * linux/include/asm-arm/mach/udc_pxa2xx.h
+ *
+ * This supports machine-specific differences in how the PXA2xx
+ * USB Device Controller (UDC) is wired.
+ *
+ * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
+ * linux/arch/mach-ixp4xx/<machine>.c and used in
+ * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
+ */
+
+struct pxa2xx_udc_mach_info {
+        int  (*udc_is_connected)(void);		/* do we see host? */
+        void (*udc_command)(int cmd);
+#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
+#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
+
+	/* Boards following the design guidelines in the developer's manual,
+	 * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
+	 * VBUS IRQ and omit the methods above.  Store the GPIO number
+	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+	 */
+	u16	gpio_vbus;			/* high == vbus present */
+	u16	gpio_pullup;			/* high == pullup activated */
+};
+