Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (120 commits)
  usb: don't update devnum for wusb devices
  wusb: make ep0_reinit available for modules
  wusb: devices dont use a set address
  wusb: teach choose_address() about wireless devices
  wusb: add link wusb-usb device
  wusb: add authenticathed bit to usb_dev
  USB: remove unnecessary type casting of urb->context
  usb serial: more fixes and groundwork for tty changes
  USB: replace remaining __FUNCTION__ occurrences
  USB: usbfs: export the URB_NO_INTERRUPT flag to userspace
  USB: fix compile problems in ehci-hcd
  USB: ehci: qh_completions cleanup and bugfix
  USB: cdc-acm: signedness fix
  USB: add documentation about callbacks
  USB: don't explicitly reenable root-hub status interrupts
  USB: OHCI: turn off RD when remote wakeup is disabled
  USB: HCDs use the do_remote_wakeup flag
  USB: g_file_storage: ignore bulk-out data after invalid CBW
  USB: serial: remove endpoints setting checks from core and header
  USB: serial: remove unneeded number endpoints settings
  ...

20 files changed, 194 insertions, 140 deletions

diff --git a/include/linux/usb.h b/include/linux/usb.h
index 583e048..c08689e 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -23,6 +23,7 @@
 
 struct usb_device;
 struct usb_driver;
+struct wusb_dev;
 
 /*-------------------------------------------------------------------------*/
 
@@ -341,103 +342,146 @@ struct usb_bus {
 
 struct usb_tt;
 
-/*
+/**
  * struct usb_device - kernel's representation of a USB device
- *
- * FIXME: Write the kerneldoc!
- *
+ * @devnum: device number; address on a USB bus
+ * @devpath: device ID string for use in messages (e.g., /port/...)
+ * @state: device state: configured, not attached, etc.
+ * @speed: device speed: high/full/low (or error)
+ * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
+ * @ttport: device port on that tt hub
+ * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
+ * @parent: our hub, unless we're the root
+ * @bus: bus we're part of
+ * @ep0: endpoint 0 data (default control pipe)
+ * @dev: generic device interface
+ * @descriptor: USB device descriptor
+ * @config: all of the device's configs
+ * @actconfig: the active configuration
+ * @ep_in: array of IN endpoints
+ * @ep_out: array of OUT endpoints
+ * @rawdescriptors: raw descriptors for each config
+ * @bus_mA: Current available from the bus
+ * @portnum: parent port number (origin 1)
+ * @level: number of USB hub ancestors
+ * @can_submit: URBs may be submitted
+ * @discon_suspended: disconnected while suspended
+ * @persist_enabled:  USB_PERSIST enabled for this device
+ * @have_langid: whether string_langid is valid
+ * @authorized: policy has said we can use it;
+ *	(user space) policy determines if we authorize this device to be
+ *	used or not. By default, wired USB devices are authorized.
+ *	WUSB devices are not, until we authorize them from user space.
+ *	FIXME -- complete doc
+ * @authenticated: Crypto authentication passed
+ * @wusb: device is Wireless USB
+ * @string_langid: language ID for strings
+ * @product: iProduct string, if present (static)
+ * @manufacturer: iManufacturer string, if present (static)
+ * @serial: iSerialNumber string, if present (static)
+ * @filelist: usbfs files that are open to this device
+ * @usb_classdev: USB class device that was created for usbfs device
+ *	access from userspace
+ * @usbfs_dentry: usbfs dentry entry for the device
+ * @maxchild: number of ports if hub
+ * @children: child devices - USB devices that are attached to this hub
+ * @pm_usage_cnt: usage counter for autosuspend
+ * @quirks: quirks of the whole device
+ * @urbnum: number of URBs submitted for the whole device
+ * @active_duration: total time device is not suspended
+ * @autosuspend: for delayed autosuspends
+ * @pm_mutex: protects PM operations
+ * @last_busy: time of last use
+ * @autosuspend_delay: in jiffies
+ * @connect_time: time device was first connected
+ * @auto_pm: autosuspend/resume in progress
+ * @do_remote_wakeup:  remote wakeup should be enabled
+ * @reset_resume: needs reset instead of resume
+ * @autosuspend_disabled: autosuspend disabled by the user
+ * @autoresume_disabled: autoresume disabled by the user
+ * @skip_sys_resume: skip the next system resume
+ *
+ * Notes:
  * Usbcore drivers should not set usbdev->state directly.  Instead use
  * usb_set_device_state().
- *
- * @authorized: (user space) policy determines if we authorize this
- *              device to be used or not. By default, wired USB
- *              devices are authorized. WUSB devices are not, until we
- *              authorize them from user space. FIXME -- complete doc
  */
 struct usb_device {
-	int		devnum;		/* Address on USB bus */
-	char		devpath [16];	/* Use in messages: /port/port/... */
-	enum usb_device_state	state;	/* configured, not attached, etc */
-	enum usb_device_speed	speed;	/* high/full/low (or error) */
+	int		devnum;
+	char		devpath [16];
+	enum usb_device_state	state;
+	enum usb_device_speed	speed;
 
-	struct usb_tt	*tt; 		/* low/full speed dev, highspeed hub */
-	int		ttport;		/* device port on that tt hub */
+	struct usb_tt	*tt;
+	int		ttport;
 
-	unsigned int toggle[2];		/* one bit for each endpoint
-					 * ([0] = IN, [1] = OUT) */
+	unsigned int toggle[2];
 
-	struct usb_device *parent;	/* our hub, unless we're the root */
-	struct usb_bus *bus;		/* Bus we're part of */
+	struct usb_device *parent;
+	struct usb_bus *bus;
 	struct usb_host_endpoint ep0;
 
-	struct device dev;		/* Generic device interface */
+	struct device dev;
 
-	struct usb_device_descriptor descriptor;/* Descriptor */
-	struct usb_host_config *config;	/* All of the configs */
+	struct usb_device_descriptor descriptor;
+	struct usb_host_config *config;
 
-	struct usb_host_config *actconfig;/* the active configuration */
+	struct usb_host_config *actconfig;
 	struct usb_host_endpoint *ep_in[16];
 	struct usb_host_endpoint *ep_out[16];
 
-	char **rawdescriptors;		/* Raw descriptors for each config */
+	char **rawdescriptors;
 
-	unsigned short bus_mA;		/* Current available from the bus */
-	u8 portnum;			/* Parent port number (origin 1) */
-	u8 level;			/* Number of USB hub ancestors */
+	unsigned short bus_mA;
+	u8 portnum;
+	u8 level;
 
-	unsigned can_submit:1;		/* URBs may be submitted */
-	unsigned discon_suspended:1;	/* Disconnected while suspended */
-	unsigned have_langid:1;		/* whether string_langid is valid */
-	unsigned authorized:1;		/* Policy has said we can use it */
-	unsigned wusb:1;		/* Device is Wireless USB */
-	int string_langid;		/* language ID for strings */
+	unsigned can_submit:1;
+	unsigned discon_suspended:1;
+	unsigned persist_enabled:1;
+	unsigned have_langid:1;
+	unsigned authorized:1;
+ 	unsigned authenticated:1;
+	unsigned wusb:1;
+	int string_langid;
 
 	/* static strings from the device */
-	char *product;			/* iProduct string, if present */
-	char *manufacturer;		/* iManufacturer string, if present */
-	char *serial;			/* iSerialNumber string, if present */
+	char *product;
+	char *manufacturer;
+	char *serial;
 
 	struct list_head filelist;
 #ifdef CONFIG_USB_DEVICE_CLASS
 	struct device *usb_classdev;
 #endif
 #ifdef CONFIG_USB_DEVICEFS
-	struct dentry *usbfs_dentry;	/* usbfs dentry entry for the device */
+	struct dentry *usbfs_dentry;
 #endif
-	/*
-	 * Child devices - these can be either new devices
-	 * (if this is a hub device), or different instances
-	 * of this same device.
-	 *
-	 * Each instance needs its own set of data structures.
-	 */
 
-	int maxchild;			/* Number of ports if hub */
+	int maxchild;
 	struct usb_device *children[USB_MAXCHILDREN];
 
-	int pm_usage_cnt;		/* usage counter for autosuspend */
-	u32 quirks;			/* quirks of the whole device */
-	atomic_t urbnum;		/* number of URBs submitted for
-					   the whole device */
+	int pm_usage_cnt;
+	u32 quirks;
+	atomic_t urbnum;
 
-	unsigned long active_duration;	/* total time device is not suspended */
+	unsigned long active_duration;
 
 #ifdef CONFIG_PM
-	struct delayed_work autosuspend; /* for delayed autosuspends */
-	struct mutex pm_mutex;		/* protects PM operations */
-
-	unsigned long last_busy;	/* time of last use */
-	int autosuspend_delay;		/* in jiffies */
-	unsigned long connect_time;	/* time device was first connected */
-
-	unsigned auto_pm:1;		/* autosuspend/resume in progress */
-	unsigned do_remote_wakeup:1;	/* remote wakeup should be enabled */
-	unsigned reset_resume:1;	/* needs reset instead of resume */
-	unsigned persist_enabled:1;	/* USB_PERSIST enabled for this dev */
-	unsigned autosuspend_disabled:1; /* autosuspend and autoresume */
-	unsigned autoresume_disabled:1;  /*  disabled by the user */
-	unsigned skip_sys_resume:1;	/* skip the next system resume */
+	struct delayed_work autosuspend;
+	struct mutex pm_mutex;
+
+	unsigned long last_busy;
+	int autosuspend_delay;
+	unsigned long connect_time;
+
+	unsigned auto_pm:1;
+	unsigned do_remote_wakeup:1;
+	unsigned reset_resume:1;
+	unsigned autosuspend_disabled:1;
+	unsigned autoresume_disabled:1;
+	unsigned skip_sys_resume:1;
 #endif
+	struct wusb_dev *wusb_dev;
 };
 #define	to_usb_device(d) container_of(d, struct usb_device, dev)
 
@@ -898,10 +942,11 @@ struct usbdrv_wrap {
  *	and should normally be the same as the module name.
  * @probe: Called to see if the driver is willing to manage a particular
  *	interface on a device.  If it is, probe returns zero and uses
- *	dev_set_drvdata() to associate driver-specific data with the
+ *	usb_set_intfdata() to associate driver-specific data with the
  *	interface.  It may also use usb_set_interface() to specify the
  *	appropriate altsetting.  If unwilling to manage the interface,
- *	return a negative errno value.
+ *	return -ENODEV, if genuine IO errors occured, an appropriate
+ *	negative errno value.
  * @disconnect: Called when the interface is no longer accessible, usually
  *	because its device has been (or is being) disconnected or the
  *	driver module is being unloaded.
@@ -916,10 +961,7 @@ struct usbdrv_wrap {
  * @pre_reset: Called by usb_reset_composite_device() when the device
  *	is about to be reset.
  * @post_reset: Called by usb_reset_composite_device() after the device
- *	has been reset, or in lieu of @resume following a reset-resume
- *	(i.e., the device is reset instead of being resumed, as might
- *	happen if power was lost).  The second argument tells which is
- *	the reason.
+ *	has been reset
  * @id_table: USB drivers use ID table to support hotplugging.
  *	Export this with MODULE_DEVICE_TABLE(usb,...).  This must be set
  *	or your driver's probe function will never get called.
@@ -1411,6 +1453,7 @@ extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags);
 extern int usb_unlink_urb(struct urb *urb);
 extern void usb_kill_urb(struct urb *urb);
 extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
+extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor);
 extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor);
 extern void usb_unanchor_urb(struct urb *urb);
 extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor,
@@ -1661,13 +1704,12 @@ extern void usb_unregister_notify(struct notifier_block *nb);
 #define dbg(format, arg...) do {} while (0)
 #endif
 
-#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \
-	__FILE__ , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \
-	__FILE__ , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \
-	__FILE__ , ## arg)
-
+#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \
+	format "\n" , ## arg)
+#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \
+	format "\n" , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \
+	format "\n" , ## arg)
 
 #endif  /* __KERNEL__ */
 
diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h
index 2dfeef1..8cb025f 100644
--- a/include/linux/usb/audio.h
+++ b/include/linux/usb/audio.h
@@ -50,4 +50,4 @@ struct usb_ac_header_descriptor_##n {				\
 	__u8  baInterfaceNr[n];					\
 } __attribute__ ((packed))
 
-#endif
+#endif /* __LINUX_USB_AUDIO_H */
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 94ee4ec..71e52f2 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -6,6 +6,9 @@
  * firmware based USB peripherals.
  */
 
+#ifndef __LINUX_USB_CDC_H
+#define __LINUX_USB_CDC_H
+
 #define USB_CDC_SUBCLASS_ACM			0x02
 #define USB_CDC_SUBCLASS_ETHERNET		0x06
 #define USB_CDC_SUBCLASS_WHCM			0x08
@@ -221,3 +224,4 @@ struct usb_cdc_notification {
 	__le16	wLength;
 } __attribute__ ((packed));
 
+#endif /* __LINUX_USB_CDC_H */
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 6169438..7e0d308 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -66,8 +66,8 @@
 #define USB_RECIP_ENDPOINT		0x02
 #define USB_RECIP_OTHER			0x03
 /* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 			0x04
-#define USB_RECIP_RPIPE 		0x05
+#define USB_RECIP_PORT			0x04
+#define USB_RECIP_RPIPE		0x05
 
 /*
  * Standard requests, for the bRequest field of a SETUP packet.
@@ -102,10 +102,16 @@
 #define USB_REQ_LOOPBACK_DATA_READ	0x16
 #define USB_REQ_SET_INTERFACE_DS	0x17
 
+/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command,
+ * used by hubs to put ports into a new L1 suspend state, except that it
+ * forgot to define its number ...
+ */
+
 /*
  * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
  * are read as a bit array returned by USB_REQ_GET_STATUS.  (So there
- * are at most sixteen features of each type.)
+ * are at most sixteen features of each type.)  Hubs may also support a
+ * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend.
  */
 #define USB_DEVICE_SELF_POWERED		0	/* (read only) */
 #define USB_DEVICE_REMOTE_WAKEUP	1	/* dev may initiate wakeup */
@@ -180,6 +186,7 @@ struct usb_ctrlrequest {
 #define USB_DT_WIRELESS_ENDPOINT_COMP	0x11
 #define USB_DT_WIRE_ADAPTER		0x21
 #define USB_DT_RPIPE			0x22
+#define USB_DT_CS_RADIO_CONTROL		0x23
 
 /* Conventional codes for class-specific descriptors.  The convention is
  * defined in the USB "Common Class" Spec (3.11).  Individual class specs
@@ -574,7 +581,9 @@ enum usb_device_state {
 	/* NOTE:  there are actually four different SUSPENDED
 	 * states, returning to POWERED, DEFAULT, ADDRESS, or
 	 * CONFIGURED respectively when SOF tokens flow again.
+	 * At this level there's no difference between L1 and L2
+	 * suspend states.  (L2 being original USB 1.1 suspend.)
 	 */
 };
 
-#endif	/* __LINUX_USB_CH9_H */
+#endif /* __LINUX_USB_CH9_H */
diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h
index 0c5ea1e..6178fde 100644
--- a/include/linux/usb/g_printer.h
+++ b/include/linux/usb/g_printer.h
@@ -18,6 +18,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#ifndef __LINUX_USB_G_PRINTER_H
+#define __LINUX_USB_G_PRINTER_H
 
 #define PRINTER_NOT_ERROR	0x08
 #define PRINTER_SELECTED	0x10
@@ -29,3 +31,5 @@
  */
 #define GADGET_GET_PRINTER_STATUS	_IOR('g', 0x21, unsigned char)
 #define GADGET_SET_PRINTER_STATUS	_IOWR('g', 0x22, unsigned char)
+
+#endif /* __LINUX_USB_G_PRINTER_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index f329529..d8128f7 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -846,4 +846,4 @@ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
 
 extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit;
 
-#endif	/* __LINUX_USB_GADGET_H */
+#endif /* __LINUX_USB_GADGET_H */
diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h
index c291ab1..ea45f26 100644
--- a/include/linux/usb/gadgetfs.h
+++ b/include/linux/usb/gadgetfs.h
@@ -1,11 +1,3 @@
-#ifndef __LINUX_USB_GADGETFS_H
-#define __LINUX_USB_GADGETFS_H
-
-#include <asm/types.h>
-#include <asm/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
 /*
  * Filesystem based user-mode API to USB Gadget controller hardware
  *
@@ -23,6 +15,14 @@
  * then performing data transfers by reading or writing.
  */
 
+#ifndef __LINUX_USB_GADGETFS_H
+#define __LINUX_USB_GADGETFS_H
+
+#include <asm/types.h>
+#include <asm/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
 /*
  * Events are delivered on the ep0 file descriptor, when the user mode driver
  * reads from this file descriptor after writing the descriptors.  Don't
diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h
index 716e0cc..0e010b2 100644
--- a/include/linux/usb/input.h
+++ b/include/linux/usb/input.h
@@ -1,6 +1,3 @@
-#ifndef __USB_INPUT_H
-#define __USB_INPUT_H
-
 /*
  * Copyright (C) 2005 Dmitry Torokhov
  *
@@ -9,6 +6,9 @@
  * the Free Software Foundation.
  */
 
+#ifndef __LINUX_USB_INPUT_H
+#define __LINUX_USB_INPUT_H
+
 #include <linux/usb.h>
 #include <linux/input.h>
 #include <asm/byteorder.h>
@@ -22,4 +22,4 @@ usb_to_input_id(const struct usb_device *dev, struct input_id *id)
 	id->version = le16_to_cpu(dev->descriptor.bcdDevice);
 }
 
-#endif
+#endif /* __LINUX_USB_INPUT_H */
diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h
index de6f380..4fd6513 100644
--- a/include/linux/usb/iowarrior.h
+++ b/include/linux/usb/iowarrior.h
@@ -1,5 +1,5 @@
-#ifndef _IOWARRIOR_H_
-#define _IOWARRIOR_H_
+#ifndef __LINUX_USB_IOWARRIOR_H
+#define __LINUX_USB_IOWARRIOR_H
 
 #define CODEMERCS_MAGIC_NUMBER	0xC0	/* like COde Mercenaries */
 
@@ -39,4 +39,4 @@ struct iowarrior_info {
 */
 #define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
 
-#endif  /* _IOWARRIOR_H_ */
+#endif /* __LINUX_USB_IOWARRIOR_H */
diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h
index 67d2826..96ca114 100644
--- a/include/linux/usb/isp116x.h
+++ b/include/linux/usb/isp116x.h
@@ -1,9 +1,11 @@
-
 /*
  * Board initialization code should put one of these into dev->platform_data
  * and place the isp116x onto platform_bus.
  */
 
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
 struct isp116x_platform_data {
 	/* Enable internal resistors on downstream ports */
 	unsigned sel15Kres:1;
@@ -27,3 +29,5 @@ struct isp116x_platform_data {
 	 */
 	void (*delay) (struct device *dev, int delay);
 };
+
+#endif /* __LINUX_USB_ISP116X_H */
diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h
index 80624c5..1d10408 100644
--- a/include/linux/usb/midi.h
+++ b/include/linux/usb/midi.h
@@ -109,4 +109,4 @@ struct usb_ms_endpoint_descriptor_##n {				\
 	__u8  baAssocJackID[n];					\
 } __attribute__ ((packed))
 
-#endif
+#endif /* __LINUX_USB_MIDI_H */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
index ec897cb..96ca549 100644
--- a/include/linux/usb/net2280.h
+++ b/include/linux/usb/net2280.h
@@ -1,11 +1,7 @@
 /*
  * NetChip 2280 high/full speed USB device controller.
  * Unlike many such controllers, this one talks PCI.
- */
-#ifndef __LINUX_USB_NET2280_H
-#define __LINUX_USB_NET2280_H
-
-/*
+ *
  * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
  * Copyright (C) 2003 David Brownell
  *
@@ -24,6 +20,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
 /*-------------------------------------------------------------------------*/
 
 /* NET2280 MEMORY MAPPED REGISTERS
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index e007074..1db25d1 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -1,11 +1,13 @@
 /* USB OTG (On The Go) defines */
-
 /*
+ *
  * These APIs may be used between USB controllers.  USB device drivers
  * (for either host or peripheral roles) don't use these calls; they
  * continue to use just usb_device and usb_gadget.
  */
 
+#ifndef __LINUX_USB_OTG_H
+#define __LINUX_USB_OTG_H
 
 /* OTG defines lots of enumeration states before device reset */
 enum usb_otg_state {
@@ -129,3 +131,5 @@ otg_start_srp(struct otg_transceiver *otg)
 
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+
+#endif /* __LINUX_USB_OTG_H */
diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h
index 1f999ec..7f6c603 100644
--- a/include/linux/usb/quirks.h
+++ b/include/linux/usb/quirks.h
@@ -4,6 +4,9 @@
  * belong here.
  */
 
+#ifndef __LINUX_USB_QUIRKS_H
+#define __LINUX_USB_QUIRKS_H
+
 /* string descriptors must not be fetched using a 255-byte read */
 #define USB_QUIRK_STRING_FETCH_255	0x00000001
 
@@ -12,3 +15,5 @@
 
 /* device can't handle Set-Interface requests */
 #define USB_QUIRK_NO_SET_INTF		0x00000004
+
+#endif /* __LINUX_USB_QUIRKS_H */
diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h
index edc1d4a..29d6458 100644
--- a/include/linux/usb/rndis_host.h
+++ b/include/linux/usb/rndis_host.h
@@ -17,10 +17,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-
-#ifndef	__RNDIS_HOST_H
-#define	__RNDIS_HOST_H
-
+#ifndef	__LINUX_USB_RNDIS_HOST_H
+#define	__LINUX_USB_RNDIS_HOST_H
 
 /*
  * CONTROL uses CDC "encapsulated commands" with funky notifications.
@@ -270,5 +268,4 @@ extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
 extern struct sk_buff *
 rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
 
-#endif	/* __RNDIS_HOST_H */
-
+#endif	/* __LINUX_USB_RNDIS_HOST_H */
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 21b4a1c..8f891cb 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -10,7 +10,6 @@
  *
  */
 
-
 #ifndef __LINUX_USB_SERIAL_H
 #define __LINUX_USB_SERIAL_H
 
@@ -146,8 +145,6 @@ struct usb_serial {
 };
 #define to_usb_serial(d) container_of(d, struct usb_serial, kref)
 
-#define NUM_DONT_CARE	99
-
 /* get and set the serial private data pointer helper functions */
 static inline void *usb_get_serial_data(struct usb_serial *serial)
 {
@@ -165,18 +162,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  *	used in the syslog messages when a device is inserted or removed.
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
- * @num_interrupt_in: If a device doesn't have this many interrupt-in
- *	endpoints, it won't be sent to the driver's attach() method.
- *	(But it might still be sent to the probe() method.)
- * @num_interrupt_out: If a device doesn't have this many interrupt-out
- *	endpoints, it won't be sent to the driver's attach() method.
- *	(But it might still be sent to the probe() method.)
- * @num_bulk_in: If a device doesn't have this many bulk-in
- *	endpoints, it won't be sent to the driver's attach() method.
- *	(But it might still be sent to the probe() method.)
- * @num_bulk_out: If a device doesn't have this many bulk-out
- *	endpoints, it won't be sent to the driver's attach() method.
- *	(But it might still be sent to the probe() method.)
  * @num_ports: the number of different ports this device will have.
  * @calc_num_ports: pointer to a function to determine how many ports this
  *	device has dynamically.  It will be called after the probe()
@@ -212,10 +197,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
 struct usb_serial_driver {
 	const char *description;
 	const struct usb_device_id *id_table;
-	char	num_interrupt_in;
-	char	num_interrupt_out;
-	char	num_bulk_in;
-	char	num_bulk_out;
 	char	num_ports;
 
 	struct list_head	driver_list;
@@ -340,5 +321,5 @@ static inline void usb_serial_debug_data(int debug,
 
 
 
-#endif	/* ifdef __LINUX_USB_SERIAL_H */
+#endif /* __LINUX_USB_SERIAL_H */
 
diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h
index 877373d..3afe4d1 100644
--- a/include/linux/usb/sl811.h
+++ b/include/linux/usb/sl811.h
@@ -1,9 +1,11 @@
-
 /*
  * board initialization should put one of these into dev->platform_data
  * and place the sl811hs onto platform_bus named "sl811-hcd".
  */
 
+#ifndef __LINUX_USB_SL811_H
+#define __LINUX_USB_SL811_H
+
 struct sl811_platform_data {
 	unsigned	can_wakeup:1;
 
@@ -24,3 +26,4 @@ struct sl811_platform_data {
 	/* void		(*clock_enable)(struct device *dev, int is_on); */
 };
 
+#endif /* __LINUX_USB_SL811_H */
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index e0501da..ba09fe8 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -19,10 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-
-#ifndef	__USBNET_H
-#define	__USBNET_H
-
+#ifndef	__LINUX_USB_USBNET_H
+#define	__LINUX_USB_USBNET_H
 
 /* interface from usbnet core to each USB networking link we handle */
 struct usbnet {
@@ -211,4 +209,4 @@ extern int usbnet_nway_reset(struct net_device *net);
 	printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
 
 
-#endif	/* __USBNET_H */
+#endif /* __LINUX_USB_USBNET_H */
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 0a40dfa..d9a3bbe 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -85,6 +85,7 @@ enum { US_DO_ALL_FLAGS };
 #define US_SC_LOCKABLE	0x07		/* Password-protected */
 
 #define US_SC_ISD200    0xf0		/* ISD200 ATA */
+#define US_SC_CYP_ATACB 0xf1		/* Cypress ATACB */
 #define US_SC_DEVICE	0xff		/* Use device's value */
 
 /* Protocols */
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 17cb108..3118ede 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -77,8 +77,11 @@ struct usbdevfs_connectinfo {
 	unsigned char slow;
 };
 
-#define USBDEVFS_URB_SHORT_NOT_OK          1
-#define USBDEVFS_URB_ISO_ASAP              2
+#define USBDEVFS_URB_SHORT_NOT_OK	0x01
+#define USBDEVFS_URB_ISO_ASAP		0x02
+#define USBDEVFS_URB_NO_FSBR		0x20
+#define USBDEVFS_URB_ZERO_PACKET	0x40
+#define USBDEVFS_URB_NO_INTERRUPT	0x80
 
 #define USBDEVFS_URB_TYPE_ISO		   0
 #define USBDEVFS_URB_TYPE_INTERRUPT	   1