znet: fix build failure from i82593.h relocation

znet was including "wireless/i82593.h" (which is a bit wierd), and I
missed that when I relocated i82593.h to drivers/staging/wavelan.  Since
I don't have ISA turned-on in my normal .config, I didn't see the build
failures -- mea culpa!

Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 229 insertions, 0 deletions

diff --git a/include/linux/i82593.h b/include/linux/i82593.h
new file mode 100644
index 0000000..afac5c7
--- /dev/null
+++ b/include/linux/i82593.h
@@ -0,0 +1,229 @@
+/*
+ * Definitions for Intel 82593 CSMA/CD Core LAN Controller
+ * The definitions are taken from the 1992 users manual with Intel
+ * order number 297125-001.
+ *
+ * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
+ *
+ * Copyright 1994, Anders Klemets <klemets@it.kth.se>
+ *
+ * HISTORY
+ * i82593.h,v
+ * Revision 1.4  2005/11/4  09:15:00  baroniunas
+ * Modified copyright with permission of author as follows:
+ *
+ *   "If I82539.H is the only file with my copyright statement
+ *    that is included in the Source Forge project, then you have
+ *    my approval to change the copyright statement to be a GPL
+ *    license, in the way you proposed on October 10."
+ *
+ * Revision 1.1  1996/07/17 15:23:12  root
+ * Initial revision
+ *
+ * Revision 1.3  1995/04/05  15:13:58  adj
+ * Initial alpha release
+ *
+ * Revision 1.2  1994/06/16  23:57:31  klemets
+ * Mirrored all the fields in the configuration block.
+ *
+ * Revision 1.1  1994/06/02  20:25:34  klemets
+ * Initial revision
+ *
+ *
+ */
+#ifndef	_I82593_H
+#define	_I82593_H
+
+/* Intel 82593 CSMA/CD Core LAN Controller */
+
+/* Port 0 Command Register definitions */
+
+/* Execution operations */
+#define OP0_NOP			0	/* CHNL = 0 */
+#define OP0_SWIT_TO_PORT_1	0	/* CHNL = 1 */
+#define OP0_IA_SETUP		1
+#define OP0_CONFIGURE		2
+#define OP0_MC_SETUP		3
+#define OP0_TRANSMIT		4
+#define OP0_TDR			5
+#define OP0_DUMP		6
+#define OP0_DIAGNOSE		7
+#define OP0_TRANSMIT_NO_CRC	9
+#define OP0_RETRANSMIT		12
+#define OP0_ABORT		13
+/* Reception operations */
+#define OP0_RCV_ENABLE		8
+#define OP0_RCV_DISABLE		10
+#define OP0_STOP_RCV		11
+/* Status pointer control operations */
+#define OP0_FIX_PTR		15	/* CHNL = 1 */
+#define OP0_RLS_PTR		15	/* CHNL = 0 */
+#define OP0_RESET		14
+
+#define CR0_CHNL		(1 << 4)	/* 0=Channel 0, 1=Channel 1 */
+#define CR0_STATUS_0		0x00
+#define CR0_STATUS_1		0x20
+#define CR0_STATUS_2		0x40
+#define CR0_STATUS_3		0x60
+#define CR0_INT_ACK		(1 << 7)	/* 0=No ack, 1=acknowledge */
+
+/* Port 0 Status Register definitions */
+
+#define SR0_NO_RESULT		0		/* dummy */
+#define SR0_EVENT_MASK		0x0f
+#define SR0_IA_SETUP_DONE	1
+#define SR0_CONFIGURE_DONE	2
+#define SR0_MC_SETUP_DONE	3
+#define SR0_TRANSMIT_DONE	4
+#define SR0_TDR_DONE		5
+#define SR0_DUMP_DONE		6
+#define SR0_DIAGNOSE_PASSED	7
+#define SR0_TRANSMIT_NO_CRC_DONE 9
+#define SR0_RETRANSMIT_DONE	12
+#define SR0_EXECUTION_ABORTED	13
+#define SR0_END_OF_FRAME	8
+#define SR0_RECEPTION_ABORTED	10
+#define SR0_DIAGNOSE_FAILED	15
+#define SR0_STOP_REG_HIT	11
+
+#define SR0_CHNL		(1 << 4)
+#define SR0_EXECUTION		(1 << 5)
+#define SR0_RECEPTION		(1 << 6)
+#define SR0_INTERRUPT		(1 << 7)
+#define SR0_BOTH_RX_TX		(SR0_EXECUTION | SR0_RECEPTION)
+
+#define SR3_EXEC_STATE_MASK	0x03
+#define SR3_EXEC_IDLE		0
+#define SR3_TX_ABORT_IN_PROGRESS 1
+#define SR3_EXEC_ACTIVE		2
+#define SR3_ABORT_IN_PROGRESS	3
+#define SR3_EXEC_CHNL		(1 << 2)
+#define SR3_STP_ON_NO_RSRC	(1 << 3)
+#define SR3_RCVING_NO_RSRC	(1 << 4)
+#define SR3_RCV_STATE_MASK	0x60
+#define SR3_RCV_IDLE		0x00
+#define SR3_RCV_READY		0x20
+#define SR3_RCV_ACTIVE		0x40
+#define SR3_RCV_STOP_IN_PROG	0x60
+#define SR3_RCV_CHNL		(1 << 7)
+
+/* Port 1 Command Register definitions */
+
+#define OP1_NOP			0
+#define OP1_SWIT_TO_PORT_0	1
+#define OP1_INT_DISABLE		2
+#define OP1_INT_ENABLE		3
+#define OP1_SET_TS		5
+#define OP1_RST_TS		7
+#define OP1_POWER_DOWN		8
+#define OP1_RESET_RING_MNGMT	11
+#define OP1_RESET		14
+#define OP1_SEL_RST		15
+
+#define CR1_STATUS_4		0x00
+#define CR1_STATUS_5		0x20
+#define CR1_STATUS_6		0x40
+#define CR1_STOP_REG_UPDATE	(1 << 7)
+
+/* Receive frame status bits */
+
+#define	RX_RCLD			(1 << 0)
+#define RX_IA_MATCH		(1 << 1)
+#define	RX_NO_AD_MATCH		(1 << 2)
+#define RX_NO_SFD		(1 << 3)
+#define RX_SRT_FRM		(1 << 7)
+#define RX_OVRRUN		(1 << 8)
+#define RX_ALG_ERR		(1 << 10)
+#define RX_CRC_ERR		(1 << 11)
+#define RX_LEN_ERR		(1 << 12)
+#define RX_RCV_OK		(1 << 13)
+#define RX_TYP_LEN		(1 << 15)
+
+/* Transmit status bits */
+
+#define TX_NCOL_MASK		0x0f
+#define TX_FRTL			(1 << 4)
+#define TX_MAX_COL		(1 << 5)
+#define TX_HRT_BEAT		(1 << 6)
+#define TX_DEFER		(1 << 7)
+#define TX_UND_RUN		(1 << 8)
+#define TX_LOST_CTS		(1 << 9)
+#define TX_LOST_CRS		(1 << 10)
+#define TX_LTCOL		(1 << 11)
+#define TX_OK			(1 << 13)
+#define TX_COLL			(1 << 15)
+
+struct i82593_conf_block {
+  u_char fifo_limit : 4,
+  	 forgnesi   : 1,
+  	 fifo_32    : 1,
+  	 d6mod      : 1,
+  	 throttle_enb : 1;
+  u_char throttle   : 6,
+	 cntrxint   : 1,
+	 contin	    : 1;
+  u_char addr_len   : 3,
+  	 acloc 	    : 1,
+ 	 preamb_len : 2,
+  	 loopback   : 2;
+  u_char lin_prio   : 3,
+	 tbofstop   : 1,
+	 exp_prio   : 3,
+	 bof_met    : 1;
+  u_char	    : 4,
+	 ifrm_spc   : 4;
+  u_char	    : 5,
+	 slottim_low : 3;
+  u_char slottim_hi : 3,
+		    : 1,
+	 max_retr   : 4;
+  u_char prmisc     : 1,
+	 bc_dis     : 1,
+  		    : 1,
+	 crs_1	    : 1,
+	 nocrc_ins  : 1,
+	 crc_1632   : 1,
+  	 	    : 1,
+  	 crs_cdt    : 1;
+  u_char cs_filter  : 3,
+	 crs_src    : 1,
+	 cd_filter  : 3,
+		    : 1;
+  u_char	    : 2,
+  	 min_fr_len : 6;
+  u_char lng_typ    : 1,
+	 lng_fld    : 1,
+	 rxcrc_xf   : 1,
+	 artx	    : 1,
+	 sarec	    : 1,
+	 tx_jabber  : 1,	/* why is this called max_len in the manual? */
+	 hash_1	    : 1,
+  	 lbpkpol    : 1;
+  u_char	    : 6,
+  	 fdx	    : 1,
+  	  	    : 1;
+  u_char dummy_6    : 6,	/* supposed to be ones */
+  	 mult_ia    : 1,
+  	 dis_bof    : 1;
+  u_char dummy_1    : 1,	/* supposed to be one */
+	 tx_ifs_retrig : 2,
+	 mc_all     : 1,
+	 rcv_mon    : 2,
+	 frag_acpt  : 1,
+  	 tstrttrs   : 1;
+  u_char fretx	    : 1,
+	 runt_eop   : 1,
+	 hw_sw_pin  : 1,
+	 big_endn   : 1,
+	 syncrqs    : 1,
+	 sttlen     : 1,
+	 tx_eop     : 1,
+  	 rx_eop	    : 1;
+  u_char rbuf_size  : 5,
+	 rcvstop    : 1,
+  	 	    : 2;
+};
+
+#define I82593_MAX_MULTICAST_ADDRESSES	128	/* Hardware hashed filter */
+
+#endif /* _I82593_H */