Merge branch 'for-next' of git://git.o-hand.com/linux-mfd

* 'for-next' of git://git.o-hand.com/linux-mfd: (30 commits)
  mfd: Fix section mismatch in da903x
  mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd
  mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd
  mfd: dm355evm msp430 driver
  mfd: Add missing break from wm3850-core
  mfd: Add WM8351 support
  mfd: Support configurable numbers of DCDCs and ISINKs on WM8350
  mfd: Handle missing WM8350 platform data
  mfd: Add WM8352 support
  mfd: Use irq_to_desc in twl4030 code
  power_supply: Add Dialog DA9030 battery charger driver
  mfd: Dialog DA9030 battery charger MFD driver
  mfd: Register WM8400 codec device
  mfd: Pass driver_data onto child devices
  mfd: Fix twl4030-core.c build error
  mfd: twl4030 regulator bug fixes
  mfd: twl4030: create some regulator devices
  mfd: twl4030: cleanup symbols and OMAP dependency
  mfd: twl4030: simplified child creation code
  power_supply: Add battery health reporting for WM8350
  ...

8 files changed, 256 insertions, 38 deletions

diff --git a/include/linux/i2c/dm355evm_msp.h b/include/linux/i2c/dm355evm_msp.h
new file mode 100644
index 0000000..3724703
--- /dev/null
+++ b/include/linux/i2c/dm355evm_msp.h
@@ -0,0 +1,79 @@
+/*
+ * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board
+ */
+#ifndef __LINUX_I2C_DM355EVM_MSP
+#define __LINUX_I2C_DM355EVM_MSP
+
+/*
+ * Written against Spectrum's writeup for the A4 firmware revision,
+ * and tweaked to match source and rev D2 schematics by removing CPLD
+ * and NOR flash hooks (which were last appropriate in rev B boards).
+ *
+ * Note that the firmware supports a flavor of write posting ... to be
+ * sure a write completes, issue another read or write.
+ */
+
+/* utilities to access "registers" emulated by msp430 firmware */
+extern int dm355evm_msp_write(u8 value, u8 reg);
+extern int dm355evm_msp_read(u8 reg);
+
+
+/* command/control registers */
+#define DM355EVM_MSP_COMMAND		0x00
+#	define MSP_COMMAND_NULL		0
+#	define MSP_COMMAND_RESET_COLD	1
+#	define MSP_COMMAND_RESET_WARM	2
+#	define MSP_COMMAND_RESET_WARM_I	3
+#	define MSP_COMMAND_POWEROFF	4
+#	define MSP_COMMAND_IR_REINIT	5
+#define DM355EVM_MSP_STATUS		0x01
+#	define MSP_STATUS_BAD_OFFSET	BIT(0)
+#	define MSP_STATUS_BAD_COMMAND	BIT(1)
+#	define MSP_STATUS_POWER_ERROR	BIT(2)
+#	define MSP_STATUS_RXBUF_OVERRUN	BIT(3)
+#define DM355EVM_MSP_RESET		0x02	/* 0 bits == in reset */
+#	define MSP_RESET_DC5		BIT(0)
+#	define MSP_RESET_TVP5154	BIT(2)
+#	define MSP_RESET_IMAGER		BIT(3)
+#	define MSP_RESET_ETHERNET	BIT(4)
+#	define MSP_RESET_SYS		BIT(5)
+#	define MSP_RESET_AIC33		BIT(7)
+
+/* GPIO registers ... bit patterns mostly match the source MSP ports */
+#define DM355EVM_MSP_LED		0x03	/* active low (MSP P4) */
+#define DM355EVM_MSP_SWITCH1		0x04	/* (MSP P5, masked) */
+#	define MSP_SWITCH1_SW6_1	BIT(0)
+#	define MSP_SWITCH1_SW6_2	BIT(1)
+#	define MSP_SWITCH1_SW6_3	BIT(2)
+#	define MSP_SWITCH1_SW6_4	BIT(3)
+#	define MSP_SWITCH1_J1		BIT(4)	/* NTSC/PAL */
+#	define MSP_SWITCH1_MSP_INT	BIT(5)	/* active low */
+#define DM355EVM_MSP_SWITCH2		0x05	/* (MSP P6, masked) */
+#	define MSP_SWITCH2_SW10		BIT(3)
+#	define MSP_SWITCH2_SW11		BIT(4)
+#	define MSP_SWITCH2_SW12		BIT(5)
+#	define MSP_SWITCH2_SW13		BIT(6)
+#	define MSP_SWITCH2_SW14		BIT(7)
+#define DM355EVM_MSP_SDMMC		0x06	/* (MSP P2, masked) */
+#	define MSP_SDMMC_0_WP		BIT(1)
+#	define MSP_SDMMC_0_CD		BIT(2)	/* active low */
+#	define MSP_SDMMC_1_WP		BIT(3)
+#	define MSP_SDMMC_1_CD		BIT(4)	/* active low */
+#define DM355EVM_MSP_FIRMREV		0x07	/* not a GPIO (out of order) */
+#define DM355EVM_MSP_VIDEO_IN		0x08	/* (MSP P3, masked) */
+#	define MSP_VIDEO_IMAGER		BIT(7)	/* low == tvp5146 */
+
+/* power supply registers are currently omitted */
+
+/* RTC registers */
+#define DM355EVM_MSP_RTC_0		0x12	/* LSB */
+#define DM355EVM_MSP_RTC_1		0x13
+#define DM355EVM_MSP_RTC_2		0x14
+#define DM355EVM_MSP_RTC_3		0x15	/* MSB */
+
+/* input event queue registers; code == ((HIGH << 8) | LOW) */
+#define DM355EVM_MSP_INPUT_COUNT	0x16	/* decrement by reading LOW */
+#define DM355EVM_MSP_INPUT_HIGH		0x17
+#define DM355EVM_MSP_INPUT_LOW		0x18
+
+#endif /* __LINUX_I2C_DM355EVM_MSP */
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index fb604dc..a8f84c0 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -78,8 +78,8 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg);
  * IMPORTANT:  For twl4030_i2c_write(), allocate num_bytes + 1
  * for the value, and populate your data starting at offset 1.
  */
-int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
-int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes);
+int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
+int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
 
 /*----------------------------------------------------------------------*/
 
@@ -278,6 +278,18 @@ struct twl4030_platform_data {
 	struct twl4030_keypad_data		*keypad;
 	struct twl4030_usb_data			*usb;
 
+	/* LDO regulators */
+	struct regulator_init_data		*vdac;
+	struct regulator_init_data		*vpll1;
+	struct regulator_init_data		*vpll2;
+	struct regulator_init_data		*vmmc1;
+	struct regulator_init_data		*vmmc2;
+	struct regulator_init_data		*vsim;
+	struct regulator_init_data		*vaux1;
+	struct regulator_init_data		*vaux2;
+	struct regulator_init_data		*vaux3;
+	struct regulator_init_data		*vaux4;
+
 	/* REVISIT more to come ... _nothing_ should be hard-wired */
 };
 
@@ -285,33 +297,6 @@ struct twl4030_platform_data {
 
 int twl4030_sih_setup(int module);
 
-/*
- * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the
- * IRQ data to subsidiary devices using platform device resources.
- */
-
-/* IRQ information-need base */
-#include <mach/irqs.h>
-/* TWL4030 interrupts */
-
-/* #define TWL4030_MODIRQ_GPIO		(TWL4030_IRQ_BASE + 0) */
-#define TWL4030_MODIRQ_KEYPAD		(TWL4030_IRQ_BASE + 1)
-#define TWL4030_MODIRQ_BCI		(TWL4030_IRQ_BASE + 2)
-#define TWL4030_MODIRQ_MADC		(TWL4030_IRQ_BASE + 3)
-/* #define TWL4030_MODIRQ_USB		(TWL4030_IRQ_BASE + 4) */
-/* #define TWL4030_MODIRQ_PWR		(TWL4030_IRQ_BASE + 5) */
-
-#define TWL4030_PWRIRQ_PWRBTN		(TWL4030_PWR_IRQ_BASE + 0)
-/* #define TWL4030_PWRIRQ_CHG_PRES		(TWL4030_PWR_IRQ_BASE + 1) */
-/* #define TWL4030_PWRIRQ_USB_PRES		(TWL4030_PWR_IRQ_BASE + 2) */
-/* #define TWL4030_PWRIRQ_RTC		(TWL4030_PWR_IRQ_BASE + 3) */
-/* #define TWL4030_PWRIRQ_HOT_DIE		(TWL4030_PWR_IRQ_BASE + 4) */
-/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT	(TWL4030_PWR_IRQ_BASE + 5) */
-/* #define TWL4030_PWRIRQ_MBCHG		(TWL4030_PWR_IRQ_BASE + 6) */
-/* #define TWL4030_PWRIRQ_SC_DETECT	(TWL4030_PWR_IRQ_BASE + 7) */
-
-/* Rest are unsued currently*/
-
 /* Offsets to Power Registers */
 #define TWL4030_VDAC_DEV_GRP		0x3B
 #define TWL4030_VDAC_DEDICATED		0x3E
@@ -322,10 +307,6 @@ int twl4030_sih_setup(int module);
 #define TWL4030_VAUX3_DEV_GRP		0x1F
 #define TWL4030_VAUX3_DEDICATED		0x22
 
-/* TWL4030 GPIO interrupt definitions */
-
-#define TWL4030_GPIO_IRQ_NO(n)		(TWL4030_GPIO_IRQ_BASE + (n))
-
 /*
  * Exported TWL4030 GPIO APIs
  *
@@ -340,4 +321,38 @@ int twl4030_set_gpio_debounce(int gpio, int enable);
 	static inline int twl4030charger_usb_en(int enable) { return 0; }
 #endif
 
+/*----------------------------------------------------------------------*/
+
+/* Linux-specific regulator identifiers ... for now, we only support
+ * the LDOs, and leave the three buck converters alone.  VDD1 and VDD2
+ * need to tie into hardware based voltage scaling (cpufreq etc), while
+ * VIO is generally fixed.
+ */
+
+/* EXTERNAL dc-to-dc buck converters */
+#define TWL4030_REG_VDD1	0
+#define TWL4030_REG_VDD2	1
+#define TWL4030_REG_VIO		2
+
+/* EXTERNAL LDOs */
+#define TWL4030_REG_VDAC	3
+#define TWL4030_REG_VPLL1	4
+#define TWL4030_REG_VPLL2	5	/* not on all chips */
+#define TWL4030_REG_VMMC1	6
+#define TWL4030_REG_VMMC2	7	/* not on all chips */
+#define TWL4030_REG_VSIM	8	/* not on all chips */
+#define TWL4030_REG_VAUX1	9	/* not on all chips */
+#define TWL4030_REG_VAUX2_4030	10	/* (twl4030-specific) */
+#define TWL4030_REG_VAUX2	11	/* (twl5030 and newer) */
+#define TWL4030_REG_VAUX3	12	/* not on all chips */
+#define TWL4030_REG_VAUX4	13	/* not on all chips */
+
+/* INTERNAL LDOs */
+#define TWL4030_REG_VINTANA1	14
+#define TWL4030_REG_VINTANA2	15
+#define TWL4030_REG_VINTDIG	16
+#define TWL4030_REG_VUSB1V5	17
+#define TWL4030_REG_VUSB1V8	18
+#define TWL4030_REG_VUSB3V1	19
+
 #endif /* End of __TWL4030_H */
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
index cad314c..115dbe9 100644
--- a/include/linux/mfd/da903x.h
+++ b/include/linux/mfd/da903x.h
@@ -32,6 +32,7 @@ enum {
 	DA9030_ID_LDO18,
 	DA9030_ID_LDO19,
 	DA9030_ID_LDO_INT,	/* LDO Internal */
+	DA9030_ID_BAT,		/* battery charger */
 
 	DA9034_ID_LED_1,
 	DA9034_ID_LED_2,
@@ -93,6 +94,43 @@ struct da9034_touch_pdata {
 	int	y_inverted;
 };
 
+/* DA9030 battery charger data */
+struct power_supply_info;
+
+struct da9030_battery_info {
+	/* battery parameters */
+	struct power_supply_info *battery_info;
+
+	/* current and voltage to use for battery charging */
+	unsigned int charge_milliamp;
+	unsigned int charge_millivolt;
+
+	/* voltage thresholds (in millivolts) */
+	int vbat_low;
+	int vbat_crit;
+	int vbat_charge_start;
+	int vbat_charge_stop;
+	int vbat_charge_restart;
+
+	/* battery nominal minimal and maximal voltages in millivolts */
+	int vcharge_min;
+	int vcharge_max;
+
+	/* Temperature thresholds. These are DA9030 register values
+	   "as is" and should be measured for each battery type */
+	int tbat_low;
+	int tbat_high;
+	int tbat_restart;
+
+
+	/* battery monitor interval (seconds) */
+	unsigned int batmon_interval;
+
+	/* platform callbacks for battery low and critical events */
+	void (*battery_low)(void);
+	void (*battery_critical)(void);
+};
+
 struct da903x_subdev_info {
 	int		id;
 	const char	*name;
@@ -190,11 +228,13 @@ extern int da903x_unregister_notifier(struct device *dev,
 extern int da903x_query_status(struct device *dev, unsigned int status);
 
 
-/* NOTE: the two functions below are not intended for use outside
- * of the DA9034 sub-device drivers
+/* NOTE: the functions below are not intended for use outside
+ * of the DA903x sub-device drivers
  */
 extern int da903x_write(struct device *dev, int reg, uint8_t val);
+extern int da903x_writes(struct device *dev, int reg, int len, uint8_t *val);
 extern int da903x_read(struct device *dev, int reg, uint8_t *val);
+extern int da903x_reads(struct device *dev, int reg, int len, uint8_t *val);
 extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask);
 extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask);
 extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask);
diff --git a/include/linux/mfd/wm8350/comparator.h b/include/linux/mfd/wm8350/comparator.h
index 0537886..54bc5d0 100644
--- a/include/linux/mfd/wm8350/comparator.h
+++ b/include/linux/mfd/wm8350/comparator.h
@@ -164,4 +164,12 @@
 #define WM8350_AUXADC_BATT			6
 #define WM8350_AUXADC_TEMP			7
 
+struct wm8350;
+
+/*
+ * AUX ADC Readback
+ */
+int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale,
+		       int vref);
+
 #endif
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 6ebf97f..980669d 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -29,6 +29,7 @@
  */
 #define WM8350_RESET_ID                         0x00
 #define WM8350_ID                               0x01
+#define WM8350_REVISION				0x02
 #define WM8350_SYSTEM_CONTROL_1                 0x03
 #define WM8350_SYSTEM_CONTROL_2                 0x04
 #define WM8350_SYSTEM_HIBERNATE                 0x05
@@ -57,6 +58,10 @@
 #define WM8350_OVER_CURRENT_INT_STATUS_MASK     0x25
 #define WM8350_GPIO_INT_STATUS_MASK             0x26
 #define WM8350_COMPARATOR_INT_STATUS_MASK       0x27
+#define WM8350_CHARGER_OVERRIDES		0xE2
+#define WM8350_MISC_OVERRIDES			0xE3
+#define WM8350_COMPARATOR_OVERRIDES		0xE7
+#define WM8350_STATE_MACHINE_STATUS		0xE9
 
 #define WM8350_MAX_REGISTER                     0xFF
 
@@ -77,6 +82,11 @@
 #define WM8350_CUST_ID_MASK                     0x00FF
 
 /*
+ * R2 (0x02) - Revision
+ */
+#define WM8350_MASK_REV_MASK			0x00FF
+
+/*
  * R3 (0x03) - System Control 1
  */
 #define WM8350_CHIP_ON                          0x8000
@@ -523,6 +533,35 @@
 #define WM8350_DC2_STS                          0x0002
 #define WM8350_DC1_STS                          0x0001
 
+/*
+ * R226 (0xE2) - Charger status
+ */
+#define WM8350_CHG_BATT_HOT_OVRDE		0x8000
+#define WM8350_CHG_BATT_COLD_OVRDE		0x4000
+
+/*
+ * R227 (0xE3) - Misc Overrides
+ */
+#define WM8350_USB_LIMIT_OVRDE			0x0400
+
+/*
+ * R227 (0xE7) - Comparator Overrides
+ */
+#define WM8350_USB_FB_OVRDE			0x8000
+#define WM8350_WALL_FB_OVRDE			0x4000
+#define WM8350_BATT_FB_OVRDE			0x2000
+
+
+/*
+ * R233 (0xE9) - State Machinine Status
+ */
+#define WM8350_USB_SM_MASK			0x0700
+#define WM8350_USB_SM_SHIFT			8
+
+#define WM8350_USB_SM_100_SLV   1
+#define WM8350_USB_SM_500_SLV   5
+#define WM8350_USB_SM_STDBY_SLV 7
+
 /* WM8350 wake up conditions */
 #define WM8350_IRQ_WKUP_OFF_STATE		43
 #define WM8350_IRQ_WKUP_HIB_STATE		44
@@ -536,6 +575,7 @@
 #define WM8350_REV_E				0x4
 #define WM8350_REV_F				0x5
 #define WM8350_REV_G				0x6
+#define WM8350_REV_H				0x7
 
 #define WM8350_NUM_IRQ				63
 
@@ -549,6 +589,14 @@ extern const u16 wm8350_mode0_defaults[];
 extern const u16 wm8350_mode1_defaults[];
 extern const u16 wm8350_mode2_defaults[];
 extern const u16 wm8350_mode3_defaults[];
+extern const u16 wm8351_mode0_defaults[];
+extern const u16 wm8351_mode1_defaults[];
+extern const u16 wm8351_mode2_defaults[];
+extern const u16 wm8351_mode3_defaults[];
+extern const u16 wm8352_mode0_defaults[];
+extern const u16 wm8352_mode1_defaults[];
+extern const u16 wm8352_mode2_defaults[];
+extern const u16 wm8352_mode3_defaults[];
 
 struct wm8350;
 
@@ -558,8 +606,6 @@ struct wm8350_irq {
 };
 
 struct wm8350 {
-	int rev;		/* chip revision */
-
 	struct device *dev;
 
 	/* device IO */
@@ -572,6 +618,8 @@ struct wm8350 {
 			 void *src);
 	u16 *reg_cache;
 
+	struct mutex auxadc_mutex;
+
 	/* Interrupt handling */
 	struct work_struct irq_work;
 	struct mutex irq_mutex; /* IRQ table mutex */
diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h
index 69b69e0..96acbfc 100644
--- a/include/linux/mfd/wm8350/pmic.h
+++ b/include/linux/mfd/wm8350/pmic.h
@@ -701,6 +701,10 @@ struct platform_device;
 struct regulator_init_data;
 
 struct wm8350_pmic {
+	/* Number of regulators of each type on this device */
+	int max_dcdc;
+	int max_isink;
+
 	/* ISINK to DCDC mapping */
 	int isink_A_dcdc;
 	int isink_B_dcdc;
diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h
index 1c8f3cd..2b94793 100644
--- a/include/linux/mfd/wm8350/supply.h
+++ b/include/linux/mfd/wm8350/supply.h
@@ -13,7 +13,8 @@
 #ifndef __LINUX_MFD_WM8350_SUPPLY_H_
 #define __LINUX_MFD_WM8350_SUPPLY_H_
 
-#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
 
 /*
  * Charger registers
@@ -104,8 +105,30 @@
 #define WM8350_IRQ_EXT_WALL_FB			37
 #define WM8350_IRQ_EXT_BAT_FB			38
 
+/*
+ * Policy to control charger state machine.
+ */
+struct wm8350_charger_policy {
+
+	/* charger state machine policy  - set in machine driver */
+	int eoc_mA;		/* end of charge current (mA)  */
+	int charge_mV;		/* charge voltage */
+	int fast_limit_mA;	/* fast charge current limit */
+	int fast_limit_USB_mA;	/* USB fast charge current limit */
+	int charge_timeout;	/* charge timeout (mins) */
+	int trickle_start_mV;	/* trickle charge starts at mV */
+	int trickle_charge_mA;	/* trickle charge current */
+	int trickle_charge_USB_mA;	/* USB trickle charge current */
+};
+
 struct wm8350_power {
 	struct platform_device *pdev;
+	struct power_supply battery;
+	struct power_supply usb;
+	struct power_supply ac;
+	struct wm8350_charger_policy *policy;
+
+	int rev_g_coeff;
 };
 
 #endif
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index f9348cb..8ff25e0 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -45,6 +45,7 @@ enum {
 	POWER_SUPPLY_HEALTH_DEAD,
 	POWER_SUPPLY_HEALTH_OVERVOLTAGE,
 	POWER_SUPPLY_HEALTH_UNSPEC_FAILURE,
+	POWER_SUPPLY_HEALTH_COLD,
 };
 
 enum {